Applications and Accessories DORMA BTS

Applications and Accessories DORMA BTS

DORMA BTS Application Drawings Aluminum Door & Frame Center Hung - Double or Single Acting BTS V Packages BTS V/A - Double-Acting. Top 8062 8062 2. Bottom Arm 22 22 BTS V/G - Single-Acting. Spindle 00 8000. Cover Plate 0 0. Closer and BTS V BTS V Packages /A - Double-Acting /G - Single-Acting. Top 8062 8062 2. Bottom Arm 22 22. Spindle 00 8000 6. Cover Plate 0 0. Closer and 6 2 EMB Package EMB/G - Single-Acting. Top 8062 6 2. Bottom Arm 22. Spindle 8000 6. Cover Plate 0 8. Closer and EMB 8 Specify hand for G packages. 2

Wood or Steel Door & Frame Center Hung - Double or Single Acting BTS V Packages BTS V/B - Double-Acting. Top 8062 8062 2. Bottom Arm 2 2 BTS V/H - Single-Acting. Spindle 00 8000. Cover Plate 0 0. Closer and BTS V BTS V Packages /B - Double-Acting /H - Single-Acting. Top 8062 8062 2. Bottom Arm 2 2. Spindle 00 8000 6. Cover Plate 0 0. Closer and 6 2 EMB Package EMB/H - Single-Acting. Top 8062 6 2. Bottom Arm 2. Spindle 8000 6. Cover Plate 0 8. Closer and EMB 8 Specify hand for H packages.

DORMA BTS Application Drawings " Offset Hung - Single Acting 2 BTS V Packages BTS V/D - " Offset, BTS V/E - " Offset, 20-Min BTS V/F - " Offset, Up to -Hr. Top 20 22 2. Intermediate 220 (optional) 222 2. Bottom Arm 2 2 2. Spindle 00 00 00. Cover Plate 0 0 0 6. Closer and BTS V BTS V BTS V 8 9 6 NFPA 80 requires that labeled fire doors up to 60" in height be provided with 2 pivots and an additional pivot for each 0" of door height or fraction thereof. The same recommendation applies to non-labeled doors. Distance between pivots may exceed 0" on non-labeled doors. Packages /D - " Offset, Specify hand for D, E, and F packages. /E - " Offset, 20-Min /F - " Offset, Up to -Hr. Top 20 22 2. Intermediate 220 (optional) 222 2. Bottom Arm 2 2 2. Spindle 00 00 00. Cover Plate 0 0 0 8. Closer and F F EMB Packages EMB/D - " Offset, EMB/E - " Offset, 20- EMB/F - " Offset, Up to Min -Hr. Top 20 22 2. Intermediate 220 (optional) 222 2. Bottom Arm 2 2 2. Spindle 00 00 00. Cover Plate 0 0 0 9. Closer and EMB EMB EMB

-/2" Offset Hung - Single Acting BTS V Packages BTS V/C - -/2" Offset, BTS V/CE - -/2" Offset, 20-Min BTS V/CF - -/2" Offset, Up to -Hr. Top 20 22 2. Intermediate 220 (optional) 222 2. Bottom Arm 2 2 2. Spindle 00 00 00. Cover Plate 0 0 0 6. Closer and BTS V BTS V BTS V 2 Packages /C - -/2" Offset, /CE - -/2" Offset, 20-Min /CF - -/2" Offset, Up to -Hr. Top 20 22 2. Intermediate 220 (optional) 222 2. Bottom Arm 2 2 2. Spindle 00 00 00. Cover Plate 0 0 0 8. Closer and F F 8 9 It is recommended that doors up to 60" in height be provided with two pivots and an additional pivot for each 0" of door height or fraction thereof. Distance between pivots may exceed 0" on non-labeled doors. 6 EMB Packages EMB/C - -/2 " Offset, EMB/CE - -/2" Offset, 20-Min Specify hand for C, CE, and CF packages. EMB/CF - -/2" Offset, Up to -Hr. Top 20 22 2. Intermediate 220 (optional) 222 2. Bottom Arm 2 2 2. Spindle 00 00 00. Cover Plate 0 0 0 9. Closer and EMB EMB EMB

DORMA BTS Application Drawings Lead-Lined Door " Offset Hung - Single Acting Packages /L - " Offset, Lead-Lined, /LE - " Offset, Lead-Lined, 20-Min /LF - " Offset, Lead Lined, Up to -Hr. Top 0 2 2. Intermediate 20 (optional) 22 2. Bottom Arm. Spindle 00 00 00. Cover Plate 0 0 0 6. Closer and F F 2 EMB Packages EMB/L - " Offset, Lead-Lined, EMB/LE - " Offset, Lead-Lined, 20-Min EMB/LF - " Offset, Lead Lined, Up to -Hr. Top 0 2 2. Intermediate 20 (optional) 22 2. Bottom Arm. Spindle 00 00 00. Cover Plate 0 0 0. Closer and EMB EMB EMB 6 It is recommended that doors up to 60" in height shall be provided with two pivots and an additional pivot for each 0" of door height or fraction thereof. Distance between pivots may exceed 0" on non-labeled doors. Specify hand for L, LE, and LF packages. 6

Independently Hung Doors Packages have been developed for use with -/2" wide butt hinges. Applications using alternate hanging means should be submitted to DORMA s Technical Services Department for review and recommendation. Hinges BTS V Packages BTS V/I -. Slide Arm Assembly N N 2. Spindle 00 00 BTS V/IF - -Hr Steel, -/2-Hr Wood. Cover Plate 0 0. Closer and BTS V BTS V Packages /I - /IF - -Hr Steel, -/2-Hr Wood 2 2. Slide Arm Assembly N N 2. Spindle 00 00. Cover Plate 0 0 6. Closer and F 6 2 EMB Packages EMB/I - EMB/IF - -Hr Steel, -/2-Hr Wood. Slide Arm Assembly N N 2. Spindle 00 00. Cover Plate 0 0. Closer and EMB EMB I packages mortise the track in the bottom of the door. I packages can be installed on the push or pull side of an opening. IF packages surface apply the track to the face of the door. Specify hand for EMB/I and EMB/IF packages.

DORMA BTS Application Drawings Independently Hung Doors Packages have been developed for use with pocket pivots. Applications using alternate hanging means should be submitted to DORMA s Technical Services Department for review and recommendation. Pocket s BTS V Packages BTS V/P -. Slide Arm Assembly N N 2. Spindle 00 00 BTS V/PF - -Hr Steel, 20-Min Wood. Cover Plate 0 0. Closer and BTS V BTS V. Pocket 20 2 Packages /P - /PF - -Hr Steel, 20-Min Wood 2 2. Slide Arm Assembly N N 2. Spindle 00 00. Cover Plate 0 0 6. Closer and F 6. Pocket 20 2 P packages mortise the track in the bottom of the door. PF packages surface apply the track to the face of the door. P and PF packages have three pocket pivots for doors up to '-6" tall. Taller doors should use an additional pivot for every 0" of door height or fraction thereof. Specify hand for P and PF packages. 8

DORMA BTS Accessories Accessories for Center Hung Installations /6 () B C /8 () / (6) 2 (0).9 () 2 (0) /6 () A Top of door 2 /8 () Bottom of frame A. /8" clearance B. /8" clearance C. " clearance C of Door & Frame /2 (29) 6 /2 (6) 2/2 (2) (2) /6 () No. 8062 Walking beam top pivot with cover plate. Adjustable to obtain top door clearances of /8", /8" or ". Optional extended pin available for clearances of ", " or -/6". /2 (0) /2 (0) 2/2 (20) 2/2 (20) 2 /2 (6) Max. /6 (2) /6 (2) / (2) Min. /8 () 9 / (2) /8 () 9 / (2) No. 2 Center hung bottom arm for steel or wood doors. No. 22 Center hung bottom arm for aluminum doors. 9

DORMA BTS Accessories Accessories for " Offset Installations / (08) /6 (2) / (6) / (6) No. 20 " offset brass top pivot. No. 22 " offset brass top pivot. U.L. listed for 20-minute rated fire doors. No. " offset steel top pivot. For use on fire doors rated up to three hours. (2) /8 (29) /6 (8) (2) /8 (29) /6 (8) 6 /8 (62) /2 (0) / (6) /2 () /6 () (6) /2 () º Typ. Cover / (2) (2) / (2) No. 220 " offset standard-duty brass intermediate pivot. No. 222 " offset standard-duty brass intermediate pivot. U.L. listed for 20-minute rated fire doors. No. 2 " offset heavy-duty steel intermediate pivot. For use on fire doors rated up to three hours. (Specify Hand) No. 2 " offset standard-duty steel bottom arm. Can also be used on fire doors rated up to three hours. (Specify Hand) No. " offset steel bottom arm. Closer is removable without removing door. Intermediate pivots are required when using this arm. (Specify Hand) 0

Accessories for -/2" Offset Installations / (08) /6 (2) /2 (8) /2 (8) / (6) / (6) No. 20 -/2" offset brass top pivot. /2 (8) /8 () (2) (2) /2 (6) 2 (0) /8 (29) (6) /8 (29) /2 (9) No. 220 -/2" offset brass intermediate pivot. (Specify Hand) No. 2 -/2" offset steel bottom arm. (Specify Hand)

DORMA BTS Accessories Accessories for " Offset Lead-Lined Installations / (08) A DOOR SIZE A -" -/" 2" -/8" 2-/" -/2" 2-/2" -/8" " 2" /8 (0) /8 (0) No. 0 " offset brass top pivot for lead-lined doors -" thick. Note: For doors 2" to " thick specify as follows: No. 0-2 For use on doors 2" thick. No. 0-2-/ For use on doors 2-/" thick. No. 0-2-/2 For use on doors 2-/2" thick. No. 0- For use on doors " thick. DOOR SIZE A B -" -/" -/2" 2" -/2" " 2-/" -" -/2" 2-/2" 2" 6" " 2-/6" 6-/8" /6 (8) /6 (8) (9) A (2) (2) DOOR SIZE A -" -/" 2" -/8" 2-/" -/2" 2-/2" -/8" /6 (0) " 2" /2 () A B A No. 20 " offset brass intermediate pivot for lead-lined doors -" thick. Note: For doors 2" to " thick specify as follows: No. 20-2 For use on doors 2" thick. No. 20-2-/ For use on doors 2-/" thick. No. 20-2-/2 For use on doors 2-/2" thick. No. 20- For use on doors " thick. (Specify Hand) No. " offset steel bottom arm for lead-lined -" doors. Note: For doors 2" to " thick specify as follows: No. -2 For use on doors 2" thick. No. -2-/ For use on doors 2-/" thick. No. -2-/2 For use on doors 2-/2" thick. No. - For use on doors " thick. (Specify Hand) 2

C C Accessories for Independently Hung Installations A B C D E F G H Inches 9/2 2/2 -/ 9-29/2 0-/8 -/ - Millimeters 20 2 2 20 20 286 00 A G B F C H E D No. N Slide Arm and Channel Drop forged steel with nylon slide block, cover washer, and anodized aluminum channel. /8 (8) /6 () /6 () /2 (9) /8 () /8 () 6 / (9) /2 (0) /8 (22) /2 () 2/2 () () C Door closed Door in pocket No. 20 Brass pocket pivot. For 90 pocket doors. No. 2 Steel pocket pivot for 90 pocket doors. U.L. listed for 20 minute wood doors and hour rated steel fire doors. (Specify Hand)

DORMA BTS Accessories Terrazzo Pan BTS V Series TP V CH for center hung applications (shown). TP V RH or LH for " offset applications (specify hand). / EMB Series TP 80 CH for center hung applications (shown). TP 80 RH or LH for " offset applications (specify hand). -/8 (9) Valve access plugs Valve access plugs - (9) 2-/8 () -/6 (8) 2-/8 () (2) 2 /2 (6) 2- () -/2 (29) (2) 2 9/2 (8) 6-/2 (6) -/6 () Locating pins Locating pins Made from stainless steel and used in lieu of standard floor plate. Offers uninterrupted appearance with terrazzo or marble. Shims are included to allow easy removal of pan after initial installation. Note: When calculating the spindle size to be used with a terrazzo pan application, add " to the desired clearance between the door and the finished floor. Cover Plate The BTS V universal cover plate 0, suitable for left hand/right hand, " offset, -/2" offset, and center pivoted doors. G H I J Inches -/8 2-/8 2-9/2 /2 Millimeters 0 08 8 2 Center ed Door R.H. Offset ed Door L.H. Offset ed Door I H J G The and EMB universal cover plate 0, suitable for left hand/right hand, " offset, -/2" offset, and center pivoted doors. G H I J Inches -/8 -/2 2-9/2 /2 Millimeters 0 8 8 2 Center ed Door R.H. Offset ed Door L.H. Offset ed Door I H J G

Spindles Spindle No. Dimension x Pre-load Dimension y (Door Clearance) Spindle No. 00 /6" 8000 /8" 00 /2" 8000 /6" 00 /8" - /6" (STD) 00 " 8000 /2" 02 " - /8" 0 /8" 800 /6" 020 -/8" 80020 /8" 02 -/6" 8002 " 00 -/2" 8000 -/6" 0 -/6" - -/2" 00 -/8" - -/6" 0 2-/6" - -/8" 00 2-/6" - 2-/6" Extended Spindle Insert NOTE: Closer and arm must be installed per template for door clearances shown to be valid. Closers with extended spindle inserts are used with thresholds, carpeted floors, terrazzo pans or in cases where more clearance between door and floor is required. All spindles are zinc plated. Center Hung Applications y REF. " (20) x Offset Hung Applications y REF. /8" () x Pre-load Spindles Spindles are available with a pre-load for additional pressure to hold door in the closed position. Normally, this is only necessary for center-pivoted single acting applications. However, they can also be used with other applications to compensate for templating errors. Specify hand of preload spindle when ordering.

DORMA Group North America www.dorma-usa.com DORMA Architectural Hardware DORMA Drive, Drawer AC Reamstown, PA 6-0 Telephone: (800) 2-88 Facsimile: (800) 2-92 E-mail: archdw@dorma-usa.com DORMA Glas 20 Jabez Run, Suite 0 Millersville, MD 208 Telephone: (800) -069 Facsimile: (0) 92-060 E-mail: glas@dorma-usa.com DORMA Canada 680 Courtney Park Drive, Unit Mississauga, Ontario LT R Telephone: (800) 8-98 Facsimile: (90) 60-80 E-mail: sales@dormacanada.com DORMA Mexico, S. de R.L. de C.V. Astrónomos 28, Col. Escandón México, D.F. 800 Del. Miguel Hidalgo Telephone: (2+) 22-69 Facsimile: (2+) 22-698 E-mail: operacion@dorma.com.mx Subject to change without notice 2.09CT M USA 0000286