NEO Manager Quick Start Guide

About Yubico Disclaimer As the inventors of the YubiKey, Yubico sets new world standards for secure login across the Internet. Our unique USB and NFC key offers one-touch strong authentication supporting multiple authentication protocols for all devices and platforms - with no driver or client software needed. With successful enterprise deployments in 140 countries, including 7 of the top 10 Internet companies, Yubico is adding the consumer market to its list of strong authentication converts. Founded in 2007, Yubico is privately held with offices in Palo Alto, Calif., Stockholm, and London. For more information visit yubico.com The contents of this document are subject to revision without notice due to continued progress in methodology, design, and manufacturing. Yubico shall have no liability for any error or damages of any kind resulting from the use of this document. The Yubico Software referenced in this document is licensed to you under the terms and conditions accompanying the software or as otherwise agreed between you or the company that you are representing. Trademarks Yubico and YubiKey are trademarks of Yubico Inc. Contact Information Yubico Inc 459 Hamilton Avenue, Suite 304 Palo Alto, CA 94301 USA yubi.co/contact NEO Manager Quick Start Guide 2014 Yubico. All rights reserved. Page 2 of 6

YubiKey NEO Manager In order to enable or disable modes on your YubiKey NEO or NEO-n, you need to download the newest version of the Yubico NEO Manager. The NEO Manager is available for Windows, OSX and Linux, and installers can be downloaded from the Yubico website using the links below. NEO Manager for Windows: http://yubi.co/neomgrwin NEO Manager for OSX: http://yubi.co/neomgrmac NEO Manager for Linux: http://yubi.co/neomrglux Once downloaded, you will need to install the NEO Manager using the default options. Once installed, launch the NEO Manager application to proceed. If a YubiKey NEO or NEO-n is not inserted in your PC, the NEO Manager will prompt you to insert your YubiKey to continue. In order to change settings with the NEO Manager, only one YubiKey NEO or NEO-n device can be plugged into your computer. The NEO Manager will allow you to optionally set a unique name for your YubiKey NEO or NEO-n, in order to better identify it when you have multiple YubiKeys. This can be done by clicking doing so will open a new window allowing you to change the name of the YubiKey NEO or NEO-n. Please note that if you have NEO Manager installed on multiple computers, the name change will only be reflected on the computer the change was made on. NEO Manager Quick Start Guide 2014 Yubico. All rights reserved. Page 4 of 6

To enable any desired combination of U2F, OTP and CCID modes, you will need to click. Clicking will open up a window allowing you to check boxes for OTP, CCID and U2F. Checking the boxes will enable that functionality on the YubiKey NEO and NEO-n. The OTP mode refers to the YubiKey functions the NEO shares with the standard YubiKey, including two Configuration Slots that can be programmed with any two of the following: Yubico OTP (programmed by Yubico in Slot 1, by default), OATH-HOTP, Challenge-Response and Static Password. The CCID Mode refers to the smart card elements on the YubiKey NEO and NEO-n, and includes the NEO applets such as OpenPGP, PIV and YubiOATH. The U2F Mode refers to the Universal 2 nd Factor (U2F) functionality of the YubiKey NEO and NEO-n. NEO Manager Quick Start Guide 2014 Yubico. All rights reserved. Page 5 of 6

Once the desired modes are selected, click to confirm the selections. The NEO Manager will instruct you to remove your YubiKey from the USB slot, then plug it back in. This will allow the YubiKey to initialize all of the selected modes. Your YubiKey NEO or NEO-n will now work in the selected modes. You can test functionality at the following websites: OTP: http://demo.yubico.com U2F: http://demo.yubico.com/u2f NEO Manager Quick Start Guide 2014 Yubico. All rights reserved. Page 6 of 6