PRODUCT CATALOGUE. www.detectomat.com

PRODUCT CATALOGUE 20 06 The Group

contents 1. fire control panels 1.1 detect 3004 fire control panel and accessories...4-11 1.2 detect 3016 fire control panel and accessories...12-17 1.3 detect 3004/3016 panel accessories...18-23 1.4 network components...24-28 1.5 programming tools and software...29-30 1.6 visualization...31-32 1.7 conventional panels...32 2. detectors 2.1 loop3000 adressable detectors...33-39 2.2 CT 3000 conventional detectors...39-42 2.3 detector accessoires...43-48 3. manual call points 3.1 loop3000 addressable manual call points...49-52 3.2 CT 3000 conventional call points...52-54 3.3 accessoires for manual call points...55 4. loop3000 modules...56-58 5. loop3000 radio extension...59-61 6. special detectors 6.1 aspiration smoke detectors...62-65 6.2 accessoires smoke detectors...66-69 6.3 infrared beam detectors...70-71 6.4 sensor cable detectors...72 6.5 flame detectors...73-75 6.6 intrisically safe detectors...75-78 7. home smoke detectors...79-82 8. signalling devices 8.1 signalling devices for loop3000...83-85 8.2 conventional signalling devices...85-90 9. door magnets and accessoires...91-95 10. detector testing devices...96-97 11. Article index...98-103 12. Terms & Conditions of Sale detectomat GmbH...104-106 page Stand August 2006 Produktaktualisierungen finden Sie laufend unter www.detectomat.de

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 31973 fire control panel detect 3004 2 slots for fire brigade and network interface 128 programmable detector zones up to 4 x 126 loop3000 components up to 16 inputs for conventional detector zones maximum loop length 3.000 m (using installation cable IY(St)Y 2 x 0,8 mm) monitored loop operation with detection system loop3000 facility for integration of fire brigade interface, display panel, transmission- and key-depot adapter interface 3 potential-free relay outputs (250 V / 5 A) 9 open collector outputs (30 V / 90 ma) monitored signal transmitter 400 ma 2 RS 232 interfaces for personal computer, printer, modem, building management system network compatible via bitbus interface up to 32 fire control panels controls or additional 63 bitbus components operation and event memory for 500 messages (first in first out principle) possibility via mounting panel to integrate a protocol-printer and LED indicator modules for zone alarm and zone fault indication option to equip a redundant main board processor (second CPU) power supply 72 W and monitored battery condition storing space for two batteries 12 V / 26 Ah Microprocessor controlled modular fire control panel DIN EN 54, VDE 0833 and VdS approved. For use with the loop3000 fire detection system components. display- and control panel DIN EN 54 part 2 4 alphanumeric lines LCD- display with backlight 2 slots for detector interface boards (max. to equip up to 4 loops or 16 conventional fire zones) input voltage 230 V AC (-15 % / +10%) frequency 50 / 60 Hz 21,0 up to 29,2 V DC power supply 72 W emergency power max. 2 x 12 V / 26 Ah 86 ma 146 ma interfaces 2 x RS 232/422 Bitbus (option) display LCD 4 x 20 characters zone LED s poss. for up to 48 zone indicators sounder output 24 V DC / 400 ma monitored external user output 24 V DC / 800 ma relay output 3 change over 250 V / 5 A open collector output 9 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C humidity up to 95 % protection class IP 30 light grey, RAL 7035 front color tele grey, RAL 7046 sheet steel 12,5 kg dimensions (H x W x D) 490 mm x 420 mm x 210 mm approvals VdS: G 203068, S 295054, LPCB, GOST, Hungary, Bulgaria, Lithuania, Czech Republik, Ukrain, Slovakia, Slovenia, Spain, Switzerland, Belgium complies with EN 54-2 remarks: if you use a printer 30106 you can use only 18 ah- or smaller batteries 4

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 31972 fire control panel shallow detect 3004 - shallow 2 slots for fire brigade and network interface 128 programmable detector zones up to 4 x 126 loop3000 components up to 16 inputs for conventional detector zones maximum loop length 3.000 m (using installation cable IY(St)Y 2 x 0,8 mm) monitored loop operation with detection system loop3000 facility for integration of fire brigade interface, display panel, transmission- and key-depot adapter interface 3 potential-free relay outputs (250 V / 5 A) 9 open collector outputs (30 V / 90 ma) monitored signal transmitter 400 ma additional external output 24V / 800mA 2 RS 232 interfaces for personal computer, printer, modem, building management system network compatible via bitbus interface up to 32 fire control panels or additional 63 bitbus components operation and event memory for 500 messages (first in first out principle) possibility via mounting panel to integrate a protocol-printer and LED indicator modules for zone alarm and zone fault indication option to equip a redundant main board processor (second CPU) power supply 72 W and monitored battery condition storing space for two batteries 12 V / 12 Ah Microprocessor controlled modular fire control panel, shallow version, DIN EN 54, VDE 0833 and VdS approved. For use with the loop3000 fire detection system components. display- and control panel DIN EN 54 part 2 4 alphanumeric lines LCD- display with backlight 2 slots for detector interface boards (max. to equip up to 4 loops or 16 conventional fire zones) input voltage 230 V AC (-15 % / +10%) frequency 50 / 60 Hz 21,0 up to 29,2 V DC power supply 72 W emergency power max. 2 x 12 V / 26 Ah 86 ma 146 ma interfaces 2 x RS 232/422 Bitbus (option) display LCD 4 x 20 characters zone LED s poss. for up to 48 zone indicators sounder output 24 V DC / 400 ma monitored external user output 24 V DC / 800 ma relay output 3 change over 250 V / 5 A open collector output 9 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C humidity up to 95 % protection class IP 30 light grey, RAL 7035 front color tele grey, RAL 7046 sheet steel 12,5 kg dimensions (H x W x D) 490 mm x 420 mm x 150 mm approvals VdS: S 295054, LPCB, GOST, Hungary, Bulgaria, Lithuania, Czech Republik, Ukrain, Slovakia, Slovenia, Spain, Switzerland, Belgium complies with EN 54-2 remarks: usable as master remote and control panel in a network with the language kit LK ABF, this version of the remote and control panel offers space for LED indicators, printer, separate power supply etc 5

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 32049 fire control panel 19" rack mount detect 3004-19" network compatible via bitbus interface up to 32 fire panel controls or additional 63 bitbus components operation and event memory for 500 messages (first in first out principle) suitable for 19" rack mount option to equip a redundant main board processor (second CPU) power supply 72 W and monitored battery condition Microprocessor controlled modular fire control panel, 19" rack mount version, DIN EN 54, VDE 0833 and VdS approved. For use with the loop3000 fire detection system components. display- and control panel DIN EN 54 part 2 4 alphanumeric lines LCD- display with backlight 2 slots for detector interface boards (max. to equip up to 4 loops or 16 conventional fire zones) 2 slots for fire brigade and network interface 128 programmable detector zones up to 4 x 126 loop3000 components up to 16 inputs for conventional detector zones maximum loop length 3.000 m (using installation cable IY(St)Y 2 x 0,8 mm) monitored loop operation with detection system loop3000 possibility for integration of fire brigade interface, display panel, transmission- and key-depot adapter interface 3 potential-free relay outputs (250 V / 5 A) 9 open collector outputs (30 V / 90 ma) monitored signal transmitter 400 ma additional external output 24V / 800mA 2 RS 232 interfaces for personal computer, printer, modem, building management system input voltage 230 V AC (-15 % / +10 %) frequency 50 / 60 Hz 21,0 up to 29,2 V DC power supply 72 W emergency power max. 2 x 12 V / 26 Ah 86 ma 146 ma interfaces 2 x RS 232/422 Bitbus (option) display LCD 4 x 20 characters zone LED s poss. for up to 48 zone indicators sounder output 24 V DC / 400 ma monitored external user output 24 V DC / 800 ma relay output 3 change over 250 V / 5 A open collector output 9 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C humidity up to 95 % protection class IP 30 front color tele grey, RAL 7046 dimensions (H x W x D) 6HE x 19" x 150 mm approvals VdS: G 203068, S 295054, LPCB, GOST, Hungary, Bulgaria, Lithuania, Czech Republik, Ukrain, Slovakia, Slovenia, Spain, Switzerland, Belgium complies with EN 54-2 remarks: the panel is designed to be mounted in a 19"- rack the power pack is separately mounted in the 19"- rack additional space is required for battery storage art. 31974 language kit German LK 3004 D language kit integrates German software, German description, German labelling remarks: it is essential to specify the language kit when ordering art. 31975 language kit English LK 3004 GB language kit integrates English software, English description, English labelling, additional languages available on request remarks: it is essential to specify the language kit when ordering 6

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 31817 1-loop interface DLI 3240 X1-1L picture similar maximum loop length 3.000 m (installation cable IY(St)Y 2 x 0,8 mm) all loop3000 components can be addressed automatically manual addressable with EasyCheck 3000 (31482) two - wire - loop 8 freely programmable open collector outputs 3 open collector outputs 30 V DC / 90 ma for alarm and fault loop voltage 32 V DC, loop current 100 ma RS 232 interface for additional data monitoring slot for optional redundant processor 20 up to 28 V DC 40 ma max. 100 ma interfaces RS 232 open collector output 11 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C 200 g dimensions (H x W x D) 140 mm x 140 mm x 30 mm to plug in to the detect 3004 fire control panel for max. 126 loop3000 components remarks: use the current version of the loop calculator to determin the maximum number of loop devices/components and mix art. 30209 2-loop interface DLI 3240 X1-2L maximum loop length 3.000 m (installation cable IY(St)Y 2 x 0,8 mm) all loop3000 components can be addressed automatically manual addressable with EasyCheck 3000 (31482) two - wire - loop 8 freely programmable open collector outputs 3 open collector outputs 30 V DC / 90 ma for alarm and fault loop voltage 32 V DC, loop current 100 ma per loop RS 232 interface for additional data monitoring slot for optional redundant processor 20 up to 28 V DC 40 ma max. 2 x 100 ma interfaces RS 232 open collector output 11 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C 200 g dimensions (H x W x D) 140 mm x 140 mm x 30 mm to plug in to the detect 3004 fire control panel for max. 2x126 loop3000 components remarks: use the current version of the loop calculator to determin the maximum number of loop devices/components and mix 7

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 32098 2-loop interface active DLI 3240 P X1 picture similar maximum loop length 3.000 m (installation cable IY(St)Y 2 x 0,8 mm) all loop3000 components can be addressed automatically manual addressable with EasyCheck 3000 (31482) two - wire - loop 8 freely programmable open collector outputs 3 open collector outputs 30 V DC / 90 ma for alarm and fault loop voltage 32 V DC, loop current 140 ma per loop RS 232 interface for additional data monitoring slot for optional redundant processor 20 up to 28 V DC 40 ma max. 2 x 140 ma interfaces RS 232 open collector output 11 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C 200 g dimensions (H x W x D) 140 mm x 140 mm x 30 mm to plug in to the detect 3004 fire control panel for max. 2x126 loop3000 components remarks: use the current version of the loop calculator to determin the maximum number of loop devices/components and mix art. 31312 2-loop interface redundant CP DLI 3240 X1-R maximum loop length 3.000 m (installation cable IY(St)Y 2 x 0,8 mm) all loop3000 components can be addressed automatically manual addressable with EasyCheck 3000 (31482) two - wire - loop 8 freely programmable open collector outputs 3 open collector outputs 30 V DC / 90 ma for alarm and fault loop voltage 32 V DC, loop current 100 ma per loop RS 232 interface for additional data monitoring redundant second processor for emergency operation 20 up to 28 V DC 40 ma max. 2 x 100 ma interfaces RS 232 open collector output 11 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C 200 g dimensions (H x W x D) 140 mm x 140 mm x 30 mm to plug in to the detect 3004 fire control panel for max. 2x126 loop3000 components remarks: use the current version of the loop calculator to determin the maximum number of loop devices/components and mix 8

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 30210 conventional interface for 8 fire zones CP CLI X1 to plug in to the detect 3004 fire control panel for max. 8 conventional fire zones maximum 25 conventional detectors per fire zone connectable 8 freely programmable open collector outputs 30 V DC / 90 ma 3 open collector outputs 30 V DC / 90 ma slot for optional redundant processor open collector output operation temperature dimensions (H x W x D) 20 up to 28 V DC 85 ma + 50 ma per zone output 11 open collector 30 V DC / 90 ma -5 C up to +40 C 200 g 140 mm x 140 mm x 30 mm art. 30927 ground circuit module CP EM to plug in to the detect 3004 fire control panel for monitoring of the galvanic separation between ground potential and all secundary voltages e.g. fire zone, monitoring outputs open collector output operation temperature front color dimensions (H x W x D) 18 up to 30 V DC 7 ma fault output voltage: max 29 V fault output current: max. 0,1 A -5 C up to +50 C green polyamid PA6.6 50 g 59 mm x 20 mm x 60 mm art. 30088 LED indicator modul CP ZM 8 two LED indicators for 8 zones per modul to plug into the fire control panel detect 3004 for zone alarm and zone fault indication 1 red and 1 yellow LED per fire zone 8 fire zones on 1 modul operation temperature dimensions (H x W) 3 ma per zone -5 C up to +40 C 93 mm x 80 mm remarks: a maximum of 6 LED indicator modules are available, an adapter plate 30386 is required for more than 16 zones 9

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 30386 adapter for LED indicator modul CP ADB 48 to plug into the detect 3004 fire conrol panel more than two LED indicator modules 30088 operation temperature dimensions (H x W) -5 C up to +40 C 55 mm x 108 mm remarks: a maximum of 6 alarm indicator zones available, adapter plate 30386 irequired after 16 zones art. 31946 mounting plate CP MP 3004 expansion mounting plate to plug in to the detect 3004 fire control panel front for up to 6 LED indicator modules or / and protocol printer including front foil mounting plate for maximum 6 LED indicator modules provides facility for protocol printer 30099 or 30106 zones can be identified by labelling operation temperature dimensions (H x W) -5 C up to +40 C 228 mm x 365 mm remarks: installation into the detect 3004 fire control panel possible art. 30111 extinguishing control modul CP ETB X1 plug in extinguishing control module for the detect 3004 fire panel to control one extinguishing area direct activation of the extinguishing area valves 4 monitored control lines for signal transmitter and solenoid valves activation from loop or conventional interface sounder output external user output operation temperature dimensions (H x W x D) 20 up to 28 V DC 45 ma 60 ma + 1 A per output 4 x 24 V DC / 1 A monitored 4 x 24 V DC / 1 A monitored -5 C up to +40 C 140 mm x 140 mm x 20 mm remarks: an additional extinguishing panel is not necessary 10

1. fire control panels 1.1 detect 3004 fire control panel and accessories art. 31318 universal expansion housing UZG-1 provides additional space for ancilary components sheet steal housing compatible with fire control panel detect 3004 lock for door protection class IP 30 light grey, RAL 7035 front color tele grey, RAL 7046 sheet steel 5 kg dimensions (H x W x D) 490 mm x 420 mm x 210 mm art. 30113 redundant main board processor CP CPU X1-R to plug in to the detect 3004 fire panel to duplicate the main board processor takes over the control in case of CPU-failure approvals VdS G 203 068 11

1. fire control panels 1.2 detect 3016 fire control panel and accessories art. 31989 fire control panel detect 3016 additional two extension with 2+1 slots connectable (max. to equip up to 16 loops or 64 conventional fire zones) 2 slots for fire brigade and network interface 192 programmable detector zones up to 16 x 126 loop3000 components up to 64 conventional fire zones maximum loop length 3.000 m (using installation cable IY(St)Y 2 x 0,8 mm) monitored loop operation with detection system loop3000 integrated fire brigade interface for control of display panel, transmission- and key-depot adapter interface 3 potential-free relay outputs (250 V / 5 A) 9 open collector outputs (30 V / 90 ma) monitored signal transmitter 400 ma 2 additional external outputs 24V / 800mA 2 RS 232 interfaces for personal computer, printer, modem, building management system network compatible via bitbus interface up to 32 fire control panels or additional 63 bitbus components operation and event memory for 500 messages (first in first out principle) possibility via mounting panel to integrate a protocol-printer and LED indicator modules for zone alarm and zone fault indication option to equip a redundant main board processor (second CPU) power supply 192 W and monitored battery condition storing space for two batteries 12 V / 45 Ah Microprocessor controlled modular fire control panel DIN EN 54, V DE 0833 and VdS approved. For use with the loop3000 fire detection system components. display- and control panel DIN EN 54 part 2 4 alphanumeric lines LCD- display with backlight the basic version offers 5 slots for detector interface boards and 1 slot for OC - boards input voltage 230 V AC (-15 % / +10%) frequency 50 / 60 Hz 21,0 up to 29,2 V DC power supply 192 W emergency power max. 2 x 12 V / 45 Ah interfaces 2x RS 232/422 Bitbus (option) display LCD 4 x 20 characters zone LED s poss. for up to 192 zone indicators sounder output 24 V DC / 400 ma monitored external user output 2 x 24 V DC / 800 ma relay output 3 change over 250 V / 5 A open collector output 9 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C humidity max. 95 % protection class IP 30 light grey, RAL 7035 front color tele grey, RAL 7046 sheet steel 30,0 kg dimensions (H x W x D) 750 mm x 600 mm x 240 mm approvals VdS: G 203067, S 295054, LPCB, GOST, CCC, Hungary, Bulgaria, Lithuania, Czech Republik, Ukrain, Slovakia, Slovenia, Spain, Switzerland, Belgium complies with EN 54-2 remarks: if you use a printer 30106 you can use only up to 5 LED indicator modules for 160 fire zones 12

1. fire control panels 1.2 detect 3016 fire control panel and accessories art. 31990 fire control panel 19" rack mount detect 3016-19" operation and event memory for 500 messages (first in first out principle) suitable for 19" rack mount possibility via mounting panel to integrate a protocol-printer and LED indicator modules for zone alarm and zone fault indication option to equip a redundant main board processor (second CPU) power supply 192 W and monitored battery condition usable for two batteries 12 V / up to 65 Ah Microprocessor controlled modular fire control panel, 19" rack mount version, DIN EN 54, VDE 0833 and VdS approved. For use with the loop3000 fire detection system components. display- and control panel DIN EN 54 part 2 4 alphanumeric lines LCD- display with backlight the basic version offers 5 slots for detector interface boards and 1 slot for OC - boards additional two extension with 2+1 slots connectable (max. to equip up to 16 loops or 64 conventional fire zones) 2 slots for fire brigade and network interface 192 programmable detector zones up to 16 x 126 loop3000 components up to 64 conventional fire zones maximum loop length 3.000 m (using installation cable IY(St)Y 2 x 0,8 mm) monitored loop operation with detection system loop3000 integrated fire brigade interface for control of display panel, transmission- and key-depot adapter interface 3 potential-free relay outputs (250 V / 5 A) 9 open collector outputs (30 V / 90 ma) monitored signal transmitter 400 ma 2 additional external outputs 24V / 800mA 2 RS 232 interfaces for personal computer, printer, modem, building management system network compatible via bitbus interface up to 32 fire control panels or additional 63 bitbus components input voltage 230 V AC (-15 % / +10%) frequency 50 / 60 Hz 21,0 up to 29,2 V DC power supply 192 W emergency power max. 2 x 12 V / 45 Ah interfaces 2x RS 232/422 Bitbus (option) display LCD 4 x 20 characters zone LED s poss. for up to 192 zone indicators sounder output 24 V DC / 400 ma monitored external user output 2 x 24 V DC / 800 ma relay output 3 change over 250 V / 5 A open collector output 9 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C humidity max. 95 % protection class IP 30 front color tele grey, RAL 7046 sheet steel 20 kg dimensions (H x W x D) 6 HE x 19" approvals VdS: G 203067, S 295054, LPCB, GOST, CCC, Hungary, Bulgaria, Lithuania, Czech Republik, Ukrain, Slovakia, Slovenia, Spain, Switzerland, Belgium complies with EN 54-2 remarks: the panel is designed to be mounted in a 19"- rack the power pack is separately mounted in the 19"- rack additional space is required for battery storage art. 31991 language kit German LK 3016 D language kit integrates German software, German description, German labelling remarks: it is essential to specify the language kit when ordering art. 31992 language kit English LK 3016 GB language kit integrates English software, English description, English labelling, additional languages available on request remarks: it is essential to specify the language kit when ordering 13

1. fire control panels 1.2 detect 3016 fire control panel and accessories art. 30201 2-loop interface redundant DLI 3240 X2-R to plug in to the detect 3016 fire control panel for max. 2 x 126 loop3000 components maximum loop length 3.000 m (installation cable IY(St)Y 2 x 0,8 mm) all loop3000 components can be addressed automatically manual addressable with EasyCheck 3000 (31482) two - wire - loop 8 freely programmable open collector outputs 3 open collector outputs 30 V DC / 90 ma for alarm and fault oop voltage 32 V DC, loop current 100 ma per loop RS 232 interface for additional data monitoring redundant board processor unit to duplicate the functions 20 up to 28 V DC 40 ma max. 2 x 100 ma interfaces RS 232 open collector output 11 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C 200 g dimensions (H x W x D) 140 mm x 140 mm x 30 mm remarks: use the current version of the loop calculator to determin the maximum number of loop devices/components and mix art. 32099 2-loop interface active, redundant DLI 3240 P X2-R picture similar to plug in to the detect 3016 fire control panel for max. 2 x 126 loop3000 components maximum loop length 3.000 m (installation cable IY(St)Y 2 x 0,8 mm) all loop3000 components can be addressed automatically manual addressable with EasyCheck 3000 (31482) two - wire - loop 8 freely programmable open collector outputs 3 open collector outputs 30 V DC / 90 ma for alarm and fault loop voltage 32 V DC, loop current 140 ma per loop RS 232 interface for additional data monitoring redundant board processor unit to duplicate the functions 20 up to 28 V DC 40 ma max. 2 x 140 ma interfaces RS 232 open collector output 11 open collector 30 V DC / 90 ma operation temperature -5 C up to +40 C 200 g dimensions (H x W x D) 140 mm x 140 mm x 30 mm approvals VdS: G 203067 remarks: use the current version of the loop calculator to determin the maximum number of loop devices/components and mix 14

1. fire control panels 1.2 detect 3016 fire control panel and accessories art. 30096 conventional interface redundant 8 fire zones CP CLI X2-R to plug in to the detect 3016 fire control panel for max. 8 conventional fire zones maximum 25 conventional detectors per fire zone connectable 8 freely programmable open collector outputs 30 V DC / 90 ma 3 open collector outputs 30 V DC / 90 ma redundant board processor unit to duplicate the functions open collector output operation temperature dimensions (H x W x D) 20 up to 28 V DC 60 ma 85 ma + 50 ma per zone output 11 open collector 30 V DC / 90 ma -5 C up to +40 C 200 g 140 mm x 140 mm x 30 mm art. 30097 extension module CP ECB to expand the detect 3016 fire control panel mother board 3 slots for plug in 2 additional loop-/conventional interfaces and 1 alarm module operation temperature -5 C up to +40 C remarks: maximum up to 2 units per detect 3016 fire control panel usable art. 30098 LED indicator modul CP ZM 32 two LED indicators for 32 zones per modul to plug into the fire control panel detect 3016 for zone alarm and zone fault indication 1 red and 1 yellow LED per fire zone 32 fire zones on 1 modul operation temperature dimensions (H x W) 3 ma per zone -5 C up to +40 C 108 mm x 193 mm remarks: maximum of 6 LED indicator modules 15

1. fire control panels 1.2 detect 3016 fire control panel and accessories art. 31947 mounting plate CP MP 3016 expansion mounting plate to plug in to the detect 3016 fire control panel front for up to 6 LED indicator modules or / and protocol printer including front foil mounting plate for maximum 6 LED indicator modules provides possibility for protocol printer 30099 or 30106 zones can be identified by labelling operation temperature dimensions (H x W) -5 C up to +40 C 400 mm x 483 mm remarks: laterly installation into the detect 3016 fire control panel possible art. 30164 mounting panel MP-1 expansion mounting front to add 19" components for the 19" cabinate dimensions (H x W) sheet steel 878 mm x 485 mm remarks: one mounting plate MP-1 is included in the deivery of the 19" cabinet 30162 und 30163 art. 30167 19" front panel 64 19" FP-1 to integrate 2 zone alarm device indications type 30098 front foil with label for fire zones 1-64 front color tele grey, RAL 7046 sheet steel dimensions (H x W) 3HE x 19" art. 30168 19" front panel 128 19" FP-2 to integrate 2 zone alarm device indications type 30098 front foil with label for fire zone 65-128 front color tele grey, RAL 7046 sheet steel dimensions (H x W) 3HE x 19" art. 30169 19" front panel 192 19" FP-3 to integrate 2 zone alarm device indications type 30098 front foil with label for fire zone 129-192 front color tele grey, RAL 7046 sheet steel dimensions (H x W) 3HE x 19" 16

1. fire control panels 1.2 detect 3016 fire control panel and accessories art. 40003 extinguishing control modul CP ETB X2 plug in extinguishing control module for the detect 3016 fire panel to control one extinguishing area direct activation of the extinguishing area valves 4 monitored control lines for signal transmitter and solenoid valves activation from loop or conventional interface 20 up to 28 V DC 45 ma 60 ma + 1 A per output sounder output 4 x 24 V DC / 1 A monitored external user output 4 x 24 V DC / 1 A monitored operation temperature -5 C up to +40 C dimensions (H x W x D) 140 mm x 140 mm x 20 mm approvals VdS G 203 067 remarks: an additional extinguishing panel is not necessary art. 31320 universal expansion housing UZG-2 provides additional space for ancilary components sheet steal housing compatible with fire control panel detect 3016 lock for door protection class IP 30 housing colour light grey, RAL 7035 front color tele grey, RAL 7046 sheet steel 10 kg dimensions (H x W x D) 750 mm x 600 mm x 240 mm art. 30112 redundant main board processor CP CPU X2-R to plug in to the detect 3016 fire panel to duplicate the main board processor takes over the control in case of CPU-failure operation temperature 50 ma 50 ma -5 C up to +40 C 17

1. fire control panels 1.3 detect 3004/3016 panel accessories art. 30077 relay board 8 change over RL 58 to expand 8 relay outputs for all fire control panels of the system detect 3000 8 potential-free output relays, change over contact 8 inputs controlled by the fire control panel 8 LED s to display the current operation status mountabel on C-rails 35mm in the panel 21 up to 28 V DC 3,5 ma 25 ma per relay relay output 8 x change over 250 V / 5 A operation temperature -5 C up to +40 C protection class IP 20 green dimensions (H x W x D) 125 mm x 110 mm x 60 mm approvals VdS G 203 067 art. 32066 monitored module for 4 outputs SC 4 to expand 4 monitored outputs for all kind of signalling devices on the fire control panels of the system detect 3000 external powered via fire control panel 4 jumpers "acoustics on/off option" to control the noise of the outputs 4 output channels with 24 V for all kind of signalling devices output current 400-600 ma choosable by jumper monitorings for short circuit, broken wire, general fault and alarm 4 alarm inputs to activate the selected output 1 general alarm input to activate all outputs "Acoustics on / off" input to disable, set or reset all of the outputs selected by the jumpers 21 up to 28 V DC 1,6 up to 2,5 ma 2,5 ma + 400/600 ma per output sounder output 4 x 24 V DC / 400 or 600 ma monitored operation temperature -5 C up to +40 C protection class IP 20 green dimensions (H x W x D) 125 mm x 130 mm x 50 mm art. 30118 monitored module for 8 outputs SC 8 VdS G 203067 8 manual switched inputs 1 general alarm input to activate all outputs external powered 24 V DC / maximum 3,2 A to expand 8 monitored outputs for all kind of signalling devices on the fire control panels of the system detect 3000 8 monitored 24 V DC / 400 ma for signalling devices (separate fused) 8 open collector outputs for LED indicators 8 alarm inputs to activate the selected output 21 up to 28 V DC 58 ma 58 ma + 400 ma per output sounder output 8 x 24 V DC / 400 ma monitored open collector output 12 outputs 24 V DC / 90 ma operation temperature -5 C up to +40 C protection class IP 20 green dimensions (H x W x D) 125 mm x 175 mm x 60 mm approvals VdS G 203 067 remarks: it is essential to use the interface 31446 in the fire control panel 18

1. fire control panels 1.3 detect 3004/3016 panel accessories art. 30115 OC control module CP AM 32 to expand 32 open collector outputs for all kind of control functions on the fire control panels of the system detect 3000 32 open collector outputs 24 V DC / 90 ma all outputs are free programmable for alarm events in the fire control panel up to 6 boards usable in detect 3016 up to 24 outputs usable in detect 3004 21 up to 28 V DC 3,5 ma 25 ma per relay interfaces RS 232 open collector output 32 outputs 24 V DC / 90 ma operation temperature -5 C up to +40 C dimensions (H x W x D) 140 mm x 140 mm x 25 mm approvals VdS G 203 067 art. 30116 connection board CP AM AP connectable via housing on DIN rails 35 mm usable as connecting box for the OC control module in installations outside the fire control panel connection board for a separate installation of the CP AM 32 protection class IP 20 housing colour orange dimensions (H x W x D) 88 mm x 175 mm x 70 mm art. 30114 extinguishing interface CP SIE indication and control functions according VdS interface to expand the fire control panel detect 3000 for connection on an extinguishing control panel connection of extinguishing control panels for several areas possible 21 up to 28 V DC 30 ma relay output 8 x change over 250 V / 5 A operation temperature -5 C up to +40 C protection class IP 20 green dimensions (H x W x D) 125 mm x 110 mm x 60 mm approvals VdS G 203 067 remarks: it is essential to use a conventional interface to connect the detector zones in the fire control panel maximum 4 extinguishing areas programmable 19

1. fire control panels 1.3 detect 3004/3016 panel accessories art. 31596 parallel indicator display ZPA2002 simultaneous display of 2 messages optional selection of RS 232 or RS 422 communication length max. 800 m including buzzer collectiv LED indicators for operation, alarm, fault and cut-off powered via fire control panel automatically data-transfer from the fire control panel more than 4.000 texts programmable parallel indicator display unit to display the current status of the fire control panels detect 3000 including an additional interface RS232/422 and ESPA 4.4.4 for nurse call systems display with 4 x 20 characters 10 up to 30 V DC 35 ma 100 ma interfaces RS232/422 ESPA 4.4.4 operation temperature -5 C up to +40 C protection class IP 30 light grey, RAL 7035 front colour black dimensions (H x W x D) 273 mm x 223 mm x 54 mm approvals VdS G 203086 art. 30106 mount in printer PIP 2 to expand the front of the fire control panel detect 3000 with a printer thermo printer with 24 characters 58 mm paper width integrated printer memory of 8 k RAM direct connectable on the fire control panels interface RS 232 powered via fire control panel remarks: by using the printer in the fire control panel detect 3004 are maximum 18 Ah batteries usable, it is essential to specify an CP MP for the panel when ordering 21 up to 28 V DC 12 ma 100 ma interfaces RS 232 operation temperature -5 C up to +40 C protection class IP 30 front colour black dimensions (H x W x D) 115 mm x 115 mm x 80 mm approvals VdS G 203 067 art. 30099 mount in printer including paper storage PIP 1 to expand the front of the 19" fire control panel detect 3000 with a printer thermo printer with 24 characters 58 mm paper width integrated printer memory of 8 k RAM direct connectable on the fire control panels interface RS 232 powered via fire control panel remarks: only usable for 19" housings, it is essential to specify a CP MP for the panel when ordering 21 up to 28 V DC 40 ma 460 ma interfaces RS 232 operation temperature -5 C up to +40 C protection class IP 30 front colour silver aluminium dimensions (H x W x D) 130 mm x 107 mm x 165 mm approvals VdS G 203 067 20

1. fire control panels 1.3 detect 3004/3016 panel accessories art. 30471 power supply 120 W NT 5 usable as additional power supply for the detect 3000 system power supply 230 V AC, 24 V DC, 5 A temperature compensated battery-loading integrated LED indicators for operation and fault input voltage 230 V AC frequency 50 / 60 Hz 24 V DC power supply 120 W external user output 3 x 1,6 A separately fused operation temperature -5 C bis +40 C protection class IP 30 light grey, RAL 7035 front colour tele grey, RAL 7046 sheet steel 13,0 kg dimensions (H x W x D) 442 mm x 525 mm x 200 mm art. 30131 power supply 192 W NT 8 usable as additional power supply for the detect 3000 system power supply 230 V AC, 24 V DC, 8 A temperature compensated battery-loading integrated LED indicators for operation and fault input voltage 230 V AC frequency 50 / 60 Hz 24 V DC power supply 155 W external user output 4 x 1,6 A separately fused operation temperature -5 C bis +40 C protection class IP 30 light grey, RAL 7035 front colour tele grey, RAL 7046 sheet steel 16,0 kg dimensions (H x W x D) 442 mm x 525 mm x 200 mm art. 40056 battery 12 V / 7,2 Ah B 12/ 7,2Ah plug-in connections: 4,8 mm 2600 g dimensions (H x W x D) 99 mm x 150 mm x 65 mm approvals VdS G 103061 art. 30155 battery 12 V / 12 Ah B 12/ 12Ah plug-in connections: 6,3 mm 4200 g dimensions (H x W x D) 98 mm x 151 mm x 98 mm approvals VdS G 103063 21

1. fire control panels 1.3 detect 3004/3016 panel accessories art. 30156 battery 12 V / 18 Ah B 12/ 18Ah screw connections for M 5 6,5 kg dimensions (H x W x D) 167 mm x 81 mm x 76 mm approvals VdS G 103064 art. 40001 battery 12 V / 26 Ah B 12/ 26Ah screw connections for M 5 8,5 kg dimensions (H x W x D) 125 mm x 176 mm x 166 mm approvals VdS G 103065 art. 30151 battery 12 V / 45 Ah B 12/ 45Ah screw connections for M 6 14,5 kg dimensions (H x W x D) 170 mm x 197 mm x 165 mm approvals VdS G 102002 art. 30461 battery 12 V / 65 Ah B 12/ 65Ah screw connections for M 6 30,0 kg dimensions (H x W x D) 174 mm x 350 mm x 174 mm approvals VdS G 102001 art. 30321 base for overvoltage protection modules CT B for connection of one protection module overvoltage protection max. permanent voltage 250 V AC or 350 V DC for two wires 250 V AC / 350 V AC operation temperature -40 C up to +80 C protection class IP 20 yellow PA 6.6 dimensions (H x W x D) 90 mm x 12 mm x 44 mm 22

1. fire control panels 1.3 detect 3004/3016 panel accessories art. 30335 loop protection module CT ME 48 overvoltage protection for all loop3000 panel boards and open collector outputs overvoltage protection for loop3000 nominal discharge current (8/20 µs): 10 ka art. 30336 conventional protection module CT ME / C 24 overvoltage protection for conventional zones overvoltage protection for conventional zones nominal discharge current (8/20 µs): 10 ka art. 30337 bitbus protection module CT ME 5 overvoltage protection for BitBus data cables overvoltage protection for conventional zones nominal discharge current (8/20 µs): 10 ka art. 30138 modem RM MO interface to connect the control panels detect 3000 via phone line connectable via RS232 on the panel powered via the rife control panel interface modem to control the fire control panels detect 3000 via phone line input voltage 230 V AC frequency 50 / 60 Hz 9 up to 30 V AC or 9 up to 42 V DC interfaces RS 232 grey front colour grey aluminium dimensions (H x W x D) 35 mm x 110 mm x 130 mm 23

1. fire control panels 1.4 network components art. 32118 remote display- and control panel ABF operation and event memory for 500 messages (first in first out principle) option to equip a redundant main board processor (second CPU) external powered via fire control panel or power supply wall mount housing to expand the detect 3000 fire detection network for an separate remote display- and control panel, wall mount housing display- and control panel DIN EN 54 part 2 including Bitbus interface for interlink connection 4 alphanumeric lines LCD- display with backlight 2 slots for fire brigade and network interface 128 programmable detector zones possibility for integration of fire brigade interface, display panel, transmission- and key-depot adapter interface 3 potential-free relay outputs (250 V / 5 A) 9 open collector outputs (30 V / 90 ma) monitored signal transmitter 400 ma 2 RS 232 interfaces for personal computer, printer, modem, building management system network compatible via bitbus interface up to 32 fire control panels or additional 63 bitbus components 21,0 up to 29,2 V DC power supply 72 W emergency power max 2 x 12 V / 12 Ah 132 ma 192 ma interfaces 2 x RS 232/422 Bitbus (option) display LCD 4 x 20 characters sounder output 24 V DC / 400 ma monitored external user output 24V DC / 800 ma relay output 3 change over 250 V / 5 A open collector output 9 open collector 30 V DC / 90 ma operation temperature -5 C bis +40 C humidity up to 95 % protection class IP 30 light grey, RAL 7035 front color tele grey, RAL 7046 sheet steel 6 kg dimensions (H x W x D) 262 mm x 420 mm x 83 mm complies with EN 54-2 remarks: it is essential to have a separate master display- and control panel ABF in the BitBus network to create an display and control panel including power supply you have to use an detect 3004 shallow with and language kit ABF it is essential to specify an language kit when ordering art. 32039 language kit German for a master panel in the BitBus network LK ABF D language kit integrates German software, German description, German labelling remarks: it is essential to specify the language kit when ordering art. 32040 language kit English for a master panel in the BitBus network LK ABF GB language kit integrates English software, English description, English labelling additional languages available on request remarks: it is essential to specify the language kit when ordering 24

1. fire control panels 1.4 network components art. 32119 remote display- and control panel ABF-19 external powered via fire control panel or power supply 19" or mount in front to expand the detect 3000 fire detection network for an separate remote display- and control panel, 19" or mount in version display- and control panel DIN EN 54 part 2 including Bitbus interface for interlink connection 4 alphanumeric lines LCD- display with backlight 2 slots for fire brigade and network interface 128 programmable detector zones possibility for integration of fire brigade interface, display panel, transmission- and key-depot adapter interface 3 potential-free relay outputs (250 V / 5 A) 9 open collector outputs (30 V / 90 ma) monitored signal transmitter 400 ma 2 RS 232 interfaces for personal computer, printer, modem, building management system network compatible via bitbus interface up to 32 fire panel controls or additional 63 bitbus components operation and event memory for 500 messages (first in first out principle) option to equip a redundant main board processor (second CPU) 21,0 up to 29,2 V DC power supply 72 W emergency power max 2 x 12 V / 12 Ah 132 ma 192 ma interfaces 2x RS 232/422 Bitbus (option) display LCD 4 x 20 characters sounder output 24 V DC / 400 ma monitored external user output 24 V DC / 800 ma relay output 3 change over 250 V / 5 A open collector output 9 open collector 30 V DC / 90 ma operation temperature -5 C bis +40 C humidity up to 95 % protection class IP 30 light grey, RAL 7035 front color tele grey, RAL 7046 sheet steel 6 kg dimensions (H x W x D) 6 HE x 19 x 83 mm complies with EN 54-2 remarks: it is essential to have a separate master display- and control panel ABF in the BitBus network to create an display and control panel including power supply you have to use an detect 3004 shallow with and language kit ABF it is essential to specify an language kit when ordering art. 31315 LCD repeater panel LCD-Tableau maximum 61 repeater panels in one BitBus network usable 4 lines with backlight LC-display display character size 10 mm integrated buzzer, with quiesent button scroll-function of the display by buttons flat design housing made of brushed stainless steel automatic data-transfer from the fire control panel external voltage supply 24 V DC remote display unit for communication with the fire detection system detect 3000 displaying of the current status of all loop devices and zones in the BitBus network monitored interface to the BitBus network 21 up to 28 V DC interfaces Bitbus display LCD 4 x 20 characters operation temperature -5 C bis +40 C humidity up to 95 % protection class IP 30 silver front color grey stainless steel dimensions (H x W x D) 240 mm x 295 mm x 43 mm 25

1. fire control panels 1.4 network components art. 30087 bitbus interface CP BBI to build up a fire control panel network of up to 32 fire control panels and up to 64 BitBus components via 4-wired interface distances up to 1.200 m (3,900 feet) possible via bitbus repeater a max. of 13.200 m can be realized in one network data rate max 375 kbd to expand the fire control panel detect 3000 to interlink several fire control panels, control- and display panels and other bitbus components interfaces operation temperature dimensions (H x W x D) 21 up to 28 V DC Bitbus -5 C bis +40 C 25 mm x 50 mm x 59 mm art. 30119 bitbus CPU BB-CPU maximum 61 units in one BitBus network usable outputs free programmable external powered 24 V DC seperate intellegent unit to control outputs in the BitBus network without using fire control panels up to 8 extensions 30120 / 30122 connectable housing for plug in on DIN rails 21 up to 28 V DC 150 ma 150 ma interfaces Bitbus operation temperature -5 C bis +40 C protection class IP 20 green dimensions (H x W x D) 125mm x 133 mm x 58 mm remarks: it ist essential to programm the unit via bitbus modem 30139 together with the DPT3000 software art. 30120 extension for BitBus CPU, 32 open collector outputs BB-32 housing for plug in on DIN rails up to 8 units on one BitBus CPU usable to expand the BitBus CPU for 32 open collector outputs 32 open collector outputs 24 V DC / 90 ma 21 up to 28 V DC 5 ma max. 320 ma open collector output 32 open collector 30 V DC / 90 ma operation temperature -5 C bis +40 C protection class IP 20 green dimensions (H x W x D) 125 mm x 163 mm x 60 mm 26

1. fire control panels 1.4 network components art. 30122 extension for BitBus CPU, 16 relay outputs BB-16 16 relay outputs 30 V DC / 2 A housing for plug in on DIN rails upto 8 units on one BitBus CPU usable to expand the BitBus CPU for 16 relay outputs 21 up to 28 V DC 5 ma max. 320 ma relay output 3 change over 30 V / 2 A operation temperature -5 C bis +40 C protection class IP 20 green dimensions (H x W x D) 125 mm x 163 mm x 60 mm art. 30128 BitBus LED indicator extension BB-LED outputs free programmable external powered 24 V DC seperate intellegent unit to control LED indicators in the BitBus network without using fire control panels for max. 192 LED indicators per interface 6 connection interfaces for LED indicator modul CP ZM 32 maximum 61 units in one BitBus network usable 21 up to 28 V DC 155 ma max. 320 ma interfaces Bitbus external user output 6 x cable connection for CP ZM 32 operation temperature -5 C bis +40 C protection class IP 20 green dimensions (H x W x D) 125 mm x 275 mm x 75 mm art. 30124 BitBus amplifier BB-R including power supply booster for refreshing the BitBus-signals for cable length > 1200 m each repeater increase the length of the BitBus network up to 1.200 m 10 repeater units in one network usable (13.200 m) the repeater needs no address in the BitBus network input voltage 230 V AC frequency 50 / 60 Hz 5 V DC interfaces 2 x Bitbus emergency power optional interfaces 2 x Bitbus protection class IP 52 operation temperature -5 C bis +40 C protection class IP 20 grey dimensions (H x W x D) 122 mm x 66 mm x 54 mm 27

1. fire control panels 1.4 network components art. 31024 BitBus computer interface ISA-Slot BBI PC interface for connection of the visual detect software to the BitBus network ISA slot plug-in card with integrated BitBus interface maximum two usable in one BitBus network interfaces operation temperature 5 V DC ISA-Bitbus -5 C up to +40 C to connect the computer to the fire control panel detect 3000 network remarks: up to 99 computers can be connected in the detect 3000 system via user extensions in the visual detect software via TCP/IP protocol art. 31621 BitBus - fibre optical interface LCON-1 transmission rate max. 5 Mbit each second maximum transmission distance per unit 2.600 m wave length 820 mm transmission half duplex externally powered active interface modul to realize an fibre optical BitBus network for the fire control panels detect 3000 converter with one fibre optical and one bitbus channel fibre optical connector F-ST 18 up to 30 V DC 250 ma interfaces Bitbus F-ST operation temperature 0 C up to +70 C protection class IP 30 black polyamid 250 g dimensions (H x W x D) 82 mm x 93 mm x 22,5 mm art. 31622 fibre optical cable converter LCON-2 transmission rate max. 5 Mbit each second optical budget 8 (4,2) db transmission path 2.600 (1.400) m wave length 820 mm transmission half duplex to active couple the bitbus to the fibre optical cable redundant transmission path LCON is a bitbus fibre optical cable converter with two fibre optical cable channels and one bitbus channel fibre optical cable connector F-ST 18 up to 30 V DC 250 ma interfaces Bitbus F-ST operation temperature 0 C up to +70 C protection class IP 30 black polyamid 250 g dimensions (H x W x D) 82 mm x 93 mm x 40 mm 28

1. fire control panels 1.5 programming tools and software art. 30501 I-Check 3000 software I-Check 3000 loop configuration and test software loop diagnostics and the location of failures are automatically displayed in a graphic of the loop3000 devices graphical representation of the loop structure via software the loop devices are constantly analysed and the analogue values are displayed graphical display of the analogue values of smoke, contamination, temperature, loop-voltage and temperature-compensation display of detector-type, serial-number, detector-zone with number, free customer text all data can be exported in Excel or Word files extensive print functions of graphics and charts configuration for all loop devices (algorithms, sensitivities, etc.) Windows based user interface the software runs on required Windows 98, 2000 or XP supports by loop Tester LT 3000 data medium CD-ROM art. 30136 detectomat programming tool DPT 3000 configuration software for the fire control panels, the separate remote display- and repeater panel and the BitBus CPU of the system detect 3000 programming of the fire control panel network-configuration supported by remote maintenance (software-expansion-dongle 30137) Windows user interface the software runs on required Windows 98, 2000 or XP Data medium CD-ROM art. 30137 software-expansion-dongle D 3000 software protection dongle for remote acces for all fire contraol panels of the system detect 3000 protection for the software activation of the features: remote diagnostics, status display and remote control of the fire control panel detect 3004, 3016 and the separate display repeater via the fire control modem dongle for 25 pole printer interface art. 30139 Bitbus programming tool BPT programming tool for the BitBus CPU including power supply connection and interface cables 29

1. fire control panels 1.5 programming tools and software art. 31482 EasyCheck EC 3000 manual programming tool for all loop3000 devices manual addressing and programming tool for all loop3000 devices battery-operated stand-alone unit double-spaced lighted LC-display keypad Integrated detector base separate connection for loop modules and manual call points read-out and changing of the addresses and grades of sensitivity of all loop3000 elements copy-function for device replacement transportation suitcase, 3 batteries type AA, interface-cable, carrier-belt, cable to connect modules and manual call points are included in the delivery art. 31625 loop tester LT 3000 loop testing tool for the all loop3000 installations, usable without panel installation test and programming tool for one loop direct connection to the personal computer independent operation without fire control panel loop diagnostics and the location of failures are automatically displayed in a graphic of the loop3000 devices graphical representation of the loop structure via software the loop devices are constantly analysed and the analogue values are displayed graphical display of the analogue values of smoke, contamination, temperature, loop-voltage and temperaturecompensation display of detector-type, serial-number, detector-zone with number, free customer text all datas can be exported in Excel or Word files extensive print-functions of graphics and charts configuration for all loop devices (algorithms, sensitivities, etc.) Windows based user interface the software runs on Windows 98, 2000 or XP 30 www.detectomat.de

1. fire control panels 1.6 visualization art. 31911 demo software for visual detect VD DV demonstration kit for visualization software for fire control panels detect 3000 without active connection to a bitbus network runs under Windows 2000/XP network compatible (server-client principle) modular structure of the software full graphic visualization simulation tool (to test the detectors and the programmed system connections) comprehensive operator and rights management, different user hierarchies can be created free definable alarm management, procedure-plans option for automatic execution of procedure-plans German/English/Russian bilingual print function (e.g. print of fire brigade routing card, unit location plans) system consists of a development and a runtime interface help function for development and runtime interface bitbus-connection via internal ISA-bitbus card password can be modified in the log-on window data-codification between server and clients detector data can be generated and read-in via the import-tool from the dpt-program full functionality within the system in one host without an active connection to a bitbus network procedure-plan are freely defined location plans, screenshots and routing cards can be printed manual and automatically all simulated messages and their execution are recorded and can be analysed and retrieved with a filter own projects are programmable, incl. scanning of unit location plans, routing cards, places of addressed detectors and creation of procedure-briefings different user hierarchies can be created within the software by assigning individual rights art. 30143 visual detect basic software VD Basic 11 basic visualization software kit - basis software for one fire control panel and one work-station runs under Windows 2000/XP network compatible (server-client principle) modular structure of the software full graphic visualization simulation tool (to test the detectors and the programmed system connections) comprehensive operator and rights management, different user-hierarchies can be created free definable alarm management, procedure-plans option for automatic execution of procedure-plans German/English/Russian bilingual print function (e.g. print of fire brigade routing card, unit location plans) system consists of a development and a runtime interface help function for development and runtime interface bitbus-connection via internal ISA-bitbus card password can be modified in the log-on window data-codification between server and clients detector data can be generated and read-in via the import-tool from the dpt-program authorization for one work-station and one fire control panel stand-alone system possible, as data-transmission between server and client via TCP/IP protocol free creation of announcements route-plans readable in all common CAD formats screenshots und route-cards can be printed manual or automatic all simulated messages and their execution are recorded and can be analysed and retrieved with a filter own projects are programmable, incl. scanning of unit location plans, routing cards, places of addressed detectors and creation of procedure-briefings different user hierarchies can be created within the software by assigning individual rights 31 www.detectomat.de

1. fire control panels 1.6 visualization art. 30144 Visual detect user expansion VD UE 1 one workstation expansion kit - for the expansion of one workstation / user in the TCP/IP network multiple workstations-expandable by one possibility to work in the network messages notification and "send messages" operator specific classificated messages and rights possible art. 30145 Visual detect expansion panel VD PE 1 one fire control panel expansion kit - for one fire control panel in the BitBus network expandable by one fire control panel unit each a maximum of 20 units can be managed operator specific classificated messages and rights possible art. 30146 Visual detect operation expansion VD CE 1 license kit - for the remote control function expansion via visualization software art. 31654 Visual detect interface management system VD M I license kit - interface to building management systems (BMS) for data support 1.7 conventional panels art. 30941 conventional fire control panel BMZ 6 6 quiescent current monitored detector zones maximum 30 automatic detector each zone 6 relay outputs for alarm and fault 2 monitored outputs for signalling devices 300 ma space for battery 1 x 12 V / 7 Ah conventional fire control panel with 6 detector-zones input voltage frequency emergency power display zone LED s sounder output relay output operation temperature dimensions (H x W x D) 230 V AC 50 / 60 Hz 24 V DC 1 x 12 V / 7,5 Ah 190 ma LED indications for 6 zones 2x 24V 300mA monitored 1 relay per zone -5 C up to +40 C grey 2 kg 240 mm x 325 mm x 80 mm 32 www.detectomat.de

2. detectors 2.1 loop3000 - adressable detectors art. 30009 optical smoke detector PL 3200 O different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) intelligent detector for loop3000, 2 optical sensors, complies with EN 54 part 7 specification loop3000 is a high functional detection-system superior operational reliability from intelligent analysis of the measuring chamber signal a second independent optical measuring channel a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity < 0,15 db / m humidity max. 95 % RH / 40 C protection class IP 40 44 mm x 100 mm approvals VdS G 202003 complies with EN 54-7 art. 30011 optical smoke detector, isolator PL 3300 O intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch superior operational reliability from intelligent analysis of the measuring chamber signal a second independent optical measuring channel a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity < 0,15 db / m humidity max. 95 % RH / 40 C protection class IP 40 44 mm x 100 mm approvals VdS G 202002 complies with EN 54-7 33

2. detectors 2.1 loop3000 - adressable detectors art. 30956 optical smoke detector, isolator, PL 3301 O intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification, design 1, color features as PL 3300 O 42 mm x 95 mm approvals VdS G 205046 complies with EN 54-7 art. 30488 optical smoke detector, isolator, silver PL 3301 O silver intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification, design 1, color silver features as PL 3300 O 42 mm x 95 mm approvals VdS G 205046 complies with EN 54-7 art. 30525 optical smoke detector, isolator, black PL 3301 O black intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification, design 1, color black features as PL 3300 O 42 mm x 95 mm approvals VdS G 205046 complies with EN 54-7 art. 30555 optical smoke detector, isolator, PL 3304 O intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification, design 4, color features as PL 3300 O 47 mm x 110 mm approvals VdS G 204088 complies with EN 54-7 34

2. detectors 2.1 loop3000 - adressable detectors art. 30556 optical smoke detector, isolator, silver PL 3304 O silver intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification, design 4, color silver features as PL 3300 O 47 mm x 110 mm approvals VdS G 204088 complies with EN 54-7 art. 30567 optical smoke detector, isolator, PL 3305 O intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification, design 5, color features as PL 3300 O 47 mm x 110 mm approvals VdS G 204089 complies with EN 54-7 art. 30568 optical smoke detector, isolator, silver PL 3305 O silver intelligent detector for loop3000, 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification, design 5, color silver features as PL 3300 O 47 mm x 110 mm approvals VdS G 204089 complies with EN 54-7 35

2. detectors 2.1 loop3000 - adressable detectors art. 32045 optical smoke detector PL 3200 O/K different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) intelligent detector for loop3000, specifically for the detection in air streams and in aspirating smoke systems (<20 m/sec.), 2 optical sensors, complies with EN 54 part 7 specification loop3000 is a high functional detection-system superior operational reliability from intelligent analysis of the measuring chamber signal a second independent optical measuring channel a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity < 0,15 db / m humidity max. 95 % RH / 40 C air speed up to 20m/sec protection class IP 40 44 mm x 100 mm approvals VdS G 206 035 complies with EN 54-7 art. 30092 optical smoke detector, isolator PL 3300 O/K intelligent detector for loop3000, specifically for the detection in air streams and in aspirating smoke systems (<20 m/sec.), 2 optical sensors and bidirectional isolator, complies with EN 54 part 7 specification loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch superior operational reliability from intelligent analysis of the measuring chamber signal a second independent optical measuring channel a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity < 0,15 db / m humidity max. 95 % RH / 40 C air speed up to 20m/sec protection class IP 40 44 mm x 100 mm approvals VdS G 202 107 complies with EN 54-7 36

2. detectors 2.1 loop3000 - adressable detectors art. 30008 heat detector PL 3200 T different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) intelligent detector for loop3000, 2 thermal sensors, complies with EN 54 part 5 specification loop3000 is a high functional detection-system superior operational reliability from intelligent analysis of the thermo sensor temperature measurement via high sensitiv sensor maximum and rate of rise analysis with thermal sensor technology a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity 60 C or rate of rise humidity max. 95 % RH / 40 C air speed up to 20m/sec protection class IP 43 52 mm x 100 mm approvals VdS G 203038 complies with EN 54-5 art. 30010 heat detector, isolator PL 3300 T intelligent detector for loop3000, 2 thermal sensors, complies with EN 54 part 5 specification loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch superior operational reliability from intelligent analysis of the thermo sensor temperature measurement via high sensitiv sensor maximum and rate of rise analysis with thermal sensor technology a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity 60 C or rate of rise humidity max. 95 % RH / 40 C air speed up to 20m/sec protection class IP 43 52 mm x 100 mm approvals VdS G 203037 complies with EN 54-5 37

2. detectors 2.1 loop3000 - adressable detectors art. 30007 optical smoke and heat detector PL 3200 OT different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) intelligent detector for loop3000, 2 optical and 2 thermal sensors, complies with EN 54 part 5 and 7 specification loop3000 is a high functional detection-system superior operational reliability from intelligent analysis of the thermo sensor and the optical measuring chamber signal temperature measurement via high sensitiv sensor maximum and rate of rise analysis with thermal sensor technology a second independent optical measuring channel a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity < 0,15 db / m 60 C or rate of rise humidity max. 95 % RH / 40 C air speed up to 20m/sec protection class IP 40 52 mm x 100 mm approvals VdS G 205052 complies with 54-7, 54-5 art. 30021 optical smoke and heat detector, isolator PL 3300 OT intelligent detector for loop3000, 2 optical and 2 thermal sensors and bidirectional isolator, complieswith EN 54 part 5 and 7 specification loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch superior operational reliability from intelligent analysis of the thermo sensor and the optical measuring chamber signal temperature measurement via high sensitiv sensor maximum and rate of rise analysis with thermal sensor technology a second independent optical measuring channel a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) 15 up to 30 V loop powered 250 µa 5 ma open collector output 10 ma for LED indicators sensitivity < 0,15 db / m 60 C or rate of rise humidity max. 95 % RH / 40 C air speed up to 20m/sec protection class IP 40 52 mm x 100 mm approvals VdS G 205051 complies with 54-7, 54-5 38

2. detectors 2.1 loop3000 - adressable detectors art. 30079 CO gas and heat detector, isolator PL 3300 CDBT different sensitivities are programmable for day and night periods a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector automatic fault monitoring of the measuring chamber electronics self learning mode in respect of environmental conditions recognition of the exact contamination-status automatic adjustment of the alarm sensitivity in case of contamination multicolour-led for alarm- (red) and fault-display (yellow) intelligent detector for loop3000, with carbon monoxid gas and 2 thermal sensors and bidirectional isolator, complies with EN 54 part 5 specification loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch superior operational reliability from intelligent analysis of the thermo sensor and the carbon monoxid sensor signal temperature measurement via high sensitiv sensor maximum and rate of rise analysis with thermal sensor technology carbon monoxid measurement via industrial detection sensor pre alarm and alarm level for carbon monoxid a dedicated thermal-sensor provides a display of the detector temperature profile at the fire control panel real sensor-tests are carried out on a periodical basis detector-sensitivity is freely programmable 15 up to 30 V loop powered 600 µa 5 ma noise integreated buzzer for gas alarm and pre alarm open collector output 10 ma for LED indicators sensitivity 60 C or rate of rise pre alarm 30 ppm CO alarm 60 ppm CO humidity max. 95 % RH / 40 C air speed up to 20m/sec protection class IP 43 58 mm x 100 mm complies with 54-7, 54-5 2.2 CT 3000 - conventional detectors art. 30015 optical smoke detector CT 3000 O conventional optical smoke detector, complies with EN 54 part 7 specification high functional detection-system intelligent analysis of the measuring chamber signal 9 up to 33 V Dc 100 µa 20 ma open collector output 15 ma for LED indicators sensitivity < 0,15 db / m operation temperature -10 C bis +60 C humidity max. 95 % RH / 40 C protection class IP 43 44 mm x 100 mm approvals VdS G 203036 complies with 54-7 39

2. detectors 2.2 CT 3000 - conventional detectors art. 30977 optical smoke detector CT 3000 O/K conventional detector, especially fot the detection in air streams and aspirating smoke systems (<20 m/sec.), with 2 optical sensors, complies with EN 54 part 7 specification high functional detection-system intelligent analysis of the measuring chamber signal 9 up to 33 V Dc 100 µa 20 ma open collector output 15 ma for LED indicators sensitivity < 0,15 db / m operation temperature -10 C bis +60 C humidity max. 95 % RH / 40 C protection class IP 43 44 mm x 100 mm approvals VdS G 203035 complies with 54-7 art. 31929 optical smoke detector, CT 3001 O conventional detector, complies with EN 54 part 7 specification, design 1 features as CT 3000 O 42 mm x 95 mm art. 31589 optical smoke detector, silver CT 3001 O silver conventional detector, complies with EN 54 part 7 specification, design 1 features as CT 3000 O 42 mm x 95 mm art. 31926 optical smoke detector, black CT 3001 O black conventional detector, complies with EN 54 part 7 specification, design 1 features as CT 3000 O 42 mm x 95 mm 40

2. detectors 2.2 CT 3000 - conventional detectors art. 30552 optical smoke detector, silver CT 3005 O silver conventional detector, complies with EN 54 part 7 specification, design 5 features as CT 3000 O low profile available Technische Daten 47 mm x 110 mm low profile version design mount in version: art. 31684 art. 30551 optical smoke detector, CT 3005 O conventional detector, complies with EN 54 part 7 specification, design 5 features as CT 3000 O low profile available Technische Daten 47 mm x 110 mm art. 30546 optical smoke detector, silver CT 3004 O silver conventional detector, complies with EN 54 part 7 specification, design 4 features as CT 3000 O low profile available Technische Daten 47 mm x 110 mm 41

2. detectors 2.2 CT 3000 - conventional detectors art. 30545 optical smoke detector, CT 3004 O conventional detector, complies with EN 54 part 7 specification, design 4 features as CT 3000 O 47 mm x 110 mm art. 30014 heat detector CT 3000 T high functional detection-system intelligent analysis of the thermal sensor conventional heat detector, complies with EN 54 part 5 specification 9 up to 33 V DC 100 µa 20 ma open collector output 15 ma for LED indicators sensitivity 60 C rate of rise humidity max. 95 % RH / 40 C protection class IP 43 52 mm x 100 mm complies with EN 54-5 art. 30022 multisensor detector CT 3000 OT high functional detection-system intelligent analysis of the thermal sensor intelligent analysis of the measuring chamber signal conventional optical smoke and heat detector, complies with EN 54 part 5 and 7 specification 9 up to 33 V DC 100 µa 20 ma open collector output 15 ma for LED indicators sensitivity < 0,15 db / m 60 rate of rise humidity max. 95 % RH / 40 C protection class IP 43 52 mm x 100 mm complies with EN 54-7, EN 54-5 42

2. detectors 2.3 detector accessoires art. 30301 detector base SDB 3000 usable for all detectors of the series loop3000 and CT, colour: standard base for all detectors of the series loop3000 and CT including LED indicator connection space for additional modules operation temperature -10 C up to +60 C 20 mm x 95 mm art. 30926 detector base, silver SDB 3000 silver similar to detector base SBD 3000 colour: silver art. 30523 detector base, black SDB 3000 black similar to detector base SBD 3000 colour: black art. 31959 detector base, bridged SDBB 3000 base for all loop3000 detectors including a bridge if the detector should be removed from the socket, colour: usable for loop3000 detectors including LED indicator connection space for additional cage clambs and modules operation temperature -10 C up to +60 C 20 mm x 95 mm art. 32084 detector base, bridged SDBB 3000 silver similar to detector base SDBB 3000 colour: silver art. 32083 detector base, bridged SDBB 3000 black similar to detector base SDBB 3000 colour: black art. 32114 diode base CDBD 3000 usable for all detectors of the series loop3000 and CT, colour: standard base for all detectors of the series loop3000 and CT including LED indicator connection space for additional modules operation temperature -10 C up to +60 C 20 mm x 95 mm 43

2. detectors 2.3 detector accessoires art. 30469 detector relay base DRB 3000 detector base with integreated relay to connect to external devices colour: detector relays base to connect to external devices the relay will be activated directly from the detector alarm output potential-free change over contact relay output operation temperature approvals change over 30 V / 1 A -10 C up to +60 C 20 mm x 95 mm BMA 06/0363-A = pending art. 32086 detector relay base DRB 3000 silver similar to detector relay base DRB 3000 colour: silver art. 32085 detector relay base DRB 3000 black similar to detector relay base DRB 3000 colour: black art. 32091 piezo buzzer for detectors Sockel Piezo additional buzzer for detectors of the series loop3000 and CT activated by open collector output noise volume 85 db - distance 0,3 meter powered by the detector noise operation temperature dimensions (H x W x D) 15 up to 33 V DC 85 db / 0,3 m -10 C up to +60 C 8 mm x 45 mm x 35 mm 44

2. detectors 2.3 detector accessoires art. 31698 wall mount base adapter APS usable as wall mount kit for all detector bases for on wall wire installations wire entries at the side internal space for additional modules operation temperature -10 C up to +60 C 28 mm x 110 mm remarks: it is essential to specifying the right base for this kit no socket included art. 31181 base for humid areas FRS universally applicable for damp locations wire entries at the side M25 screw fitting included operation temperature -10 C up to +60 C 40 mm x 110 mm usable as wall mount kit for all detector bases for difficult and humid envirements remarks: it is essential to specifying the right base for this kit no socket included art. 31191 housing for air ducts LKMG including pipe for ingress and outlet air sampling ingress of air pipe length: 210 mm for air ducts up to 350 mm length special lengths for ingress of air pipes possible without detector base operation temperature air speed housing colour dimensions (H x W x D) -10 C up to +60 C 1 up to 25m/s grey 200 mm x 110 mm x 92 mm housing with test-box and sensor-pipe to monitore air streams with optical detectors of the series loop3000 and CT remarks: it is essential to specifying the right base for this kit no socket included 45

2. detectors 2.3 detector accessoires art. 31875 base with heating APSB usable as wall mount kit with monitored heating for all detector bases for difficult and humid envoirements additional on-wall base with temperature controlled heating usable in installations up to - 30 C external user output operation temperature 24 V DC 160 ma 4W heating -30 C up to +60 C 335 g 55 mm x 110 mm remarks: it is essential to specifying the right base for this kit no socket included art. 31684 flush-mounting adapter silver DR45 usable as mount in kit to semi-recess detectors of the design 4 and 5 in ceilings, color silver flush mounting base kit for detectors design 4 and 5 of the series loop3000 and CT usable in installations in lower ceilings ceiling hole diameter 120mm operation temperature -10 C up to +60 C silver sheet steel 35 mm x 165 mm remarks: it is essential to specifying the right base for this kit art. 32070 flush-mounting adapter DR45W usable as mount in kit to semi-recess detectors of the design 4 and 5 in ceilings, color flush mounting base kit for detectors design 4 and 5 of the series loop3000 and CT usable in installations in lower ceilings ceiling hole diameter 120mm sheet steel 35 mm x 165 mm remarks: it is essential to specifying the right base for this kit 46

2. detectors 2.3 detector accessoires art. 30479 labelling tag for detector base MBC usable for all detector bases of the series loop3000 and CT colour: fixing via plug in selling-packages at 30 pieces operation temperature colour dimensions (H x W) -10 C up to +60 C 28 mm x 45 mm art. 30187 detector mounting adapter MKBD for an distanced installation of all detector bases to ceilings or walls infinitely adjustable 270 to 480 mm detector mounting-plate infinitely inclinable 0 until 110 colour light grey, RAL 7035 sheet steel dimensions (H x W x D) 135 mm x 100 mm x 270-480 mm art. 30188 detector flap-mounting adapter MKK for an distanced installation of all detector bases to ceilings or walls inclinable 0 until 110 colour light grey, RAL 7035 sheet steel dimensions (H x W x D) 150 mm x 117 mm x 13-154 mm 47

2. detectors 2.3 detector accessoires art. 30189 detector distance-mounting adapter MAK for an distanced installation of all detector bases to ceilings or walls panel for mounting automatic fire detectors in lowered ceilings ceiling distance 80 mm colour light grey, RAL 7035 sheet steel dimensions (H x W x D) 80 mm x 138 mm x 100 mm art. 30190 wall bracket WA4 for an distanced installation of all detector bases to ceilings or walls for mounting of automatic fire detectors, for example over fire protected doors distance to the wall: 400 mm colour light grey, RAL 7035 sheet steel dimensions (H x W x D) 50 mm x 100 mm x 400 mm art. 30191 wall bracket WA2 for an distanced installation of all detector bases to ceilings or walls for mounting of automatic fire detectors, for example over fire protected doors distance to the wall: 200 mm colour light grey, RAL 7035 sheet steel dimensions (H x W x D) 50 mm x 100 mm x 200 mm 48 www.detectomat.de

3. manual call points 3.1 loop3000 - addressable manual call points art. 31669 manual call point, PL 3300 PBDH--R intelligent manual call point for loop3000,, red, with bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector multicolour-led for alarm 15 up to 30 V loop powered 250 µa 5 ma protection class IP 42 red, RAL 3000 dimensions (H x W x D) 125 mm x 125 mm x 35 mm approvals VdS G 203021 complies with EN 14655 art. 31059 manual call point, PL 3300 PBD--B intelligent manual call point for loop3000,, blue, with bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector multicolour-led for alarm 15 up to 30 V loop powered 250 µa 5 ma protection class IP 42 blue dimensions (H x W x D) 125 mm x 125 mm x 35 mm approvals VdS G 203021 complies with EN 14655 49 www.detectomat.de

3. manual call points 3.1 loop3000 - addressable manual call points art. 31060 manual call point, PL 3300 PBD--Y intelligent manual call point for loop3000,, yellow, with bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector multicolour-led for alarm 15 up to 30 V loop powered 250 µa 5 ma protection class IP 42 yellow dimensions (H x W x D) 125 mm x 125 mm x 35 mm approvals VdS G 203021 complies with EN 14655 art. 31668 manual call point, ALU PL 3300 PBDH-ALU-R intelligent manual call point for loop3000, ALU, red, with bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector multicolour-led for alarm 15 up to 30 V loop powered 250 µa 5 ma protection class IP 42 red, RAL 3000 aluminium dimensions (H x W x D) 125 mm x 125 mm x 34 mm approvals VdS G 203021 complies with EN 14655 50

3. manual call points 3.1 loop3000 - addressable manual call points art. 31061 manual call point, ALU PL 3300 PBD-ALU-B intelligent manual call point for loop3000, ALU, blue, with bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector multicolour-led for alarm 15 up to 30 V loop powered 250 µa 5 ma protection class IP 42 blue aluminium dimensions (H x W x D) 125 mm x 125 mm x 34 mm complies with EN 14655 art. 31062 manual call point, ALU PL 3300 PBD-ALU-Y intelligent manual call point for loop3000, ALU, yellow, with bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector multicolour-led for alarm 15 up to 30 V loop powered 250 µa 5 ma protection class IP 42 yellow aluminium dimensions (H x W x D) 125 mm x 125 mm x 34 mm complies with EN 14655 51

3. manual call points 3.1 loop3000 - addressable manual call points art. 32065 manual call point PL 3300 MCP-kit addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector intelligent manual call point for loop3000, red, labeled symbol: "burning house", with bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator 15 up to 30 V loop powered 370 µa 5 ma protection class IP 42 red, RAL 3000 dimensions (H x W x D) 88 mm x 88 mm x 54 mm approvals LPCB 166b/8 complies with EN 54 art. 30569 manual call point, chinese PL 3300 MCP-kit intelligent manual call point for loop3000, ALU red, labeled symbol: "Fire Alarm", with bidirectional isolator chinese version 2 LED displays for operation and alarm 1 output for evacuation systems loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch a log of the last maintenance date is stored automatic addressing (soft-addressing) manual addressing (EasyCheck) outputs for alarm and fault condition indication at the detector multicolour-led for alarm 15 up to 30 V loop powered 250 µa 5 ma protection class IP42 red, RAL 3000 dimensions (H x W x D) 125 mm x 125 mm x 34 mm complies with CCC 3.2 CT 3000 - conventional call points art. 31675 manual call point,, red CT 3000 PBDH--R conventional manual call point for the series CT3000 LED indicator for alarm, housing 12 up to 24 V DC 27 ma protection class IP 42 red, RAL 3000 dimensions (H x W x D) 125 mm x 125 mm x 34 mm approvals VdS G296033 complies with EN 54 52

3. manual call points 3.2 CT 3000 - conventional call points art. 31651 manual call point,, blue CT 3000 PBD--B conventional manual call point for the series CT3000 LED indicator for alarm, housing 12 up to 24 V DC 27 ma protection class IP 42 blue dimensions (H x W x D) 125 mm x 125 mm x 34 mm complies with EN 54 art. 31676 manual call point, ALU, red CT 3000 PBDH-ALU-R conventional manual call point for the series CT3000 LED indicator for alarm, housing aluminium 12 up to 24 V DC 27 ma protection class IP 42 red, RAL 3000 aluminium dimensions (H x W x D) 125 mm x 125 mm x 34 mm approvals VdS G 202034 complies with EN 54 art. 31087 manual call point, ALU, blue CT 3000 PBD-ALU-BD conventional manual call point for the series CT3000 LED indicator for alarm, housing aluminium 12 up to 24 V DC 27 ma protection class IP 42 blue aluminium dimensions (H x W x D) 125 mm x 125 mm x 34 mm complies with EN 54 53

3. manual call points 3.2 CT 3000 - conventional call points art. 31088 manual call point, ALU, yellow CT 3000 PBD-ALU-YD conventional manual call point for the series CT3000 LED indicator for alarm, housing aluminium 12 up to 24 V DC 27 ma operation temperature -20 C up to +70 C protection class IP 42 yellow aluminium dimensions (H x W x D) 125 mm x 125 mm x 34 mm approvals VdS G 205 018 complies with EN 54 art. 31083 manual call point, IP 66, red CT 3000 PDB-IP66-R conventional manual call point for the series CT3000, IP 66 protected for critical envoirements LED indicator for alarm housing waterdust and proof IP 66 two switching contacts connectable on loop3000 via AMD3311 19 up to 28 V DC 20 ma operation temperature -20 C up to +80 C protection class IP 66 red, RAL 3000 aluminium dimensions (H x W x D) 135 mm x 145 mm x 70 mm approvals VdS G 295025 complies with EN 54 art. 32082 manual call point,, red SBDH--R conventional manual call point for the series CT3000 9 up to 33 V DC 27 ma protection class IP 42 red, RAL 3000 dimensions (H x W x D) 88 mm x 88 mm x 54 mm approvals LPCB 166b/8 complies with EN 54 54

3. manual call points 3.3 accessoires for manual call points art. 31091 weatherproof housing WG-R in red for aluminium manual call points usable to reach protection level IP 54 including fitting kit red, RAL 3000 aluminium dimensions (H x W x D) 145 mm x 131 mm x 55 mm art. 31092 weatherproof housing WG-B in blue for aluminium manual call points usable to reach protection level IP 54 including fitting kit dimensions (H x W x D) blue aluminium 145 mm x 131 mm x 55 mm art. 40054 key for manual call point HFM-SCH-M art. 31910 glass for manual call point HFM EG unlabeled dimensions (H x W) 80 mm x 80 mm art. 31069 glass for manual call point HFM EG-B labeled with blue circle dimensions (H x W) 80 mm x 80 mm art. 30026 glass for manual call point HFM EG-G labeled with yellow circle dimensions (H x W) 80 mm x 80 mm 55

4. loop3000 modules art. 30200 in-/output module IOM 3311 intelligent input output module for loop3000 with bidirectional isolator in a housing loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch 1 monitored input to connect external devices to the loop3000 1 potential-free output to control external devices in- and output are freely programmable automatic addressing (soft-addressing) manual addressing (EasyCheck) multicolour-led for alarm- (red) and fault-display (yellow) 15 up to 30 V loop powered 500 µa 5 ma relay output change over 30 V / 1 A protection class IP 54 grey, RAL 7035 dimensions (H x W x D) 93 mm x 93 mm x 55 mm approvals VdS G 205029 complies with EN 54 art. 32073 extension module UBW 3311 extension module for the realisation of controlled outputs via the IOM3311 or the OMS3301 1 monitored output with broken wire- and short circuit monitoring maximum current 1 A via external supply convenient for the monitored connection of signaling devices directly connectable in the housing of the IOM3311 or OMS3301 external powered 24V DC 11 ma up to 1A sounder output up to 1A dimensions (H x W x D) 20 mm x 38 mm x 35 mm approvals pending complies with EN 54 56

4. loop3000 modules art. 30211 output module OMS 3301 1 potential-free output to control external devices the relays can be reset at the fire control panel via "external sounder on/off" output is freely programmable automatic addressing (soft-addressing) manual addressing (EasyCheck) intelligent sounder-control-module for loop3000 including bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch 15 up to 30 V loop powered 500 µa 5 ma relay output change over 30 V / 1 A protection class IP 54 grey, RAL 7035 dimensions (H x W x D) 93 mm x 93 mm x 55 mm approvals VdS G 205030 complies with EN 54 art. 30513 mini in-/output module AMD 3311 automatic addressing (soft-addressing) manual addressing (EasyCheck) poured ciruit board version intelligent input output module for loop3000 with bidirectional isolator in mini version loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch 1 monitored input to connect external devices to the loop3000 1 open collector output to control external devices in- and output are freely programmable 15 up to 30 V loop powered 370 µa 5 ma open collector output 500 ma blue dimensions (H x W x D) 27 mm x 73 mm x 15 mm approvals VdS G 206047 complies with EN 54 art. 31640 mini output module OMS 3301mini automatic addressing (soft-addressing) manual addressing (EasyCheck) poured ciruit board version intelligent sounder-control-module for loop3000 including bidirectional isolator loop3000 is a high functional detection-system including bidirectional short circuit isolator addressable spur connection via T-branch 1 open collector output to control external devices output is freely programmable 15 up to 30 V loop powered 370 µa 5 ma open collector output 500 ma blue dimensions (H x W x D) 27 mm x 73 mm x 15 mm complies with EN 54 57

4. loop3000 modules art. 32074 in-/output module mini AOM 3301 intelligent module for loop3000 including bidirectional isolator loop3000 is a high functionality detection-system including bidirectional short circuit isolator addressable spur connection via T-branch 1 monitored input to connect external devices to the loop3000 1 monitored output to control external devices in- and output are freely programmable automatic addressing (soft-addressing) manual addressing (EasyCheck) ciruit board version 15 up to 30 V loop powered 370 µa 5 ma external user output 5 ma monitored dimensions (H x W x D) 27 mm x 73 mm x 15 mm complies with EN 54 art. 30205 conventional zone module TCM 3300 intelligent module for loop3000 for connection of 1 zone of conventional detectors, including bidirectional isolator detector zone interface with high functionality for loop3000 integrated bidirectional short circuit isolator addressable spur connection via T-branch variable adjustable of short circuit-, break wire-, pre-alarm- and alarm threshold external power supply of 12 / 24 volt automatic addressing (soft-addressing) manual addressing (EasyCheck) multicolour-led for alarm- (red) and fault-display (yellow) 15 up to 30 V loop powered 500 µa 5 ma per zone external user output 12 / 24 V 10 ma + zone current protection class IP 54 grey, RAL 7035 dimensions (H x W x D) 93 mm x 93 mm x 55 mm approvals VdS G 206048 complies with EN 54 58

5. loop3000 - radio extension art. 30025 wireless gateway WGW 3300 5 radio-channels and 2 emergency-channels 433/868 MHz with changeover operation up to 32 wireless devices can be connected per gateway analogue values of the detectors can be shown via the detectomat fire control panel the detectomat fire control panel can allocate the plaintext and zones of the devices meets the requirements of BS 5839, EN 54 and VdS common alarm and fault relays for stand alone operation separate current supply and emergency power supply integrated emergency power supply by commercial standard AA-batteries up to 10 gateways in one radio nit can be integrated without quality loss intelligent wireless gateway for loop3000 to connect wireless detectors/-modules, including bidirectional isolators a high functionality wireless extention to the loop3000 for the integration of wireless detectors and -modules including bidirectional short circuit isolator as loop-module programming and status is displayed by a 4 x 20 character display keyboard consists of 16 keys for controlling and programming frequency 2 x 433 MHz, 5 x 868 MHz 24 V DC external emergency power batteries 8 x AA Mignon 20 ma display 4 x 20 characters relay output alarm 30 V / 1 A fault 30 V / 1 A protection class IP 65 grey, RAL 7035 dimensions (H x W x D) 200 mm x 120 mm x 77 mm approvals VdS pending, LPCB, E 120684/1.1, TE 226593 complies with EN 54-25 art. 30003 wireless optical smoke detector WL 3200 O intelligent wireless optical smoke detector for loop3000 high functionality detection system for loop3000 equivilant to loop-device in conjunction with gateway WGW 3300 power supplied by 2 pieces of commercial standard C-batteries battery lifetime approximatley 3 years a programmable piezo-sounder is included frequency 2 x 433 MHz, 5 x 868 MHz 3 V, 2 x MX1400 LR 14 Duracell protection class IP 42 65 mm x 100 mm approvals VdS pending, LPCB, E 120684/1.1, TE 226593 complies with EN 54-7 59

5. loop3000 - radio extension art. 32005 antenna for extended range WGA 3200 external antenna for the wireless gateway WGW 3300 antenna for the improvement of the radio-field quality and range in intricate area conditions dimensions (H x W x D) 490 mm x 270 mm x 330 mm art. 31627 wireless input module WL 3210 EM equivilant to loop-device in conjunction with gateway WGW 3300 stand-alone addressed during universal operation power supplied by commercial standard A mignon battery lifetime approximatley 3 years 1 monitored input, freely programmable via the detectomat fire control panel integrated alarm-sound an activation-module, e.g. a manual call point or a similar device can be separated up to 5 m intelligent input module for loop3000 high functionality detection system for loop3000 frequency 2 x 433 MHz, 5 x 868 MHz 3 V, 2 x MX1400 LR 14, Duracell protection class IP 54 grey, RAL 7035 dimensions (H x W x D) 93 mm x 93 mm x 55 mm approvals LPCB, E 120684/1.1, TE 226593 complies with EN 54 60

5. loop3000 - radio extension art. 31626 radio field analyzer RFA 3000 with the possibility to switch between sending and receiving-mode radio filed intensity analyzer (1 pair) to identify the best installation area of the detectomat wireless devices battery operated unit 2 x AA-batteries) separate antenna for 433 and 868 MHz LED signal strength gage-display the measurements can be transferred to a personal computer via a serial interface (optional) LED display for sending, receiving and frequency-band frequency 20 x 433 MHz, 4 x 868 Hz 3 V, 2 x AA protection class IP 30 grey, RAL 7035 dimensions (H x W x D) 195 mm x 66 mm x 27 mm 61

6. special detectors 6.1 aspiration smoke detectors art. 31114 Stratos HSSD-2 standard detector HSSD-2 M sensitivity adjustable: 0,002-25 % obs/m max. 1600 mç (one fire compartment) can be monitored max. length of aspiration-pipes: 200 m with 100 bore holes or 250 m with 80 bore holes LC display 2 x 16 characters, cursor key control panel integrated dust filter meets the requirements of the VdS up to 127 STRATOS devices can be connected in a network by the integrated RS 485 uninterruptible external current supply 24 V DC intelligent smoke detector for building a highly sensitive asirating smoke system for earliest fire detection for the earliest detection of fire by a laser-detector-chamber with patented artificial intelligence "classifire" to monitor clean-rooms as well as contaminated areas and also in areas, which are used by vehicles with combustion motor highest sensitivity, optimal alarm threshold and low false alarm rates are ensured by the automatic adjustment to the respective area conditions 24 V DC 400 ma interfaces RS 485 display 2 x 16 characters relay output 3 (alarm, pre-alarm, fault) sensitivity (0,002-25) % obs / m (0,0003-10) µm protection class IP 50 light grey aluminium dimensions (H x W x D) 372 mm x 427 mm x 95 mm approvals VdS G 203024, LPCB, CCC complies with EN 54-13 remarks: the project engineering guidelines of the manufacturer has to be considered by the planning of the system all project engineering documents have to be signed by detectomat GmbH art. 31867 Stratos HSSD-2 standard detector without display HSSD-2 MOD intelligent smoke detector for building a highly sensitive asirating smoke system for earliest fire detection, without display for the earliest detection of fire by a laser-detector-chamber with patented artificial intelligence "classifire" to monitor clean-rooms as well as contaminated areas and also in areas, which are used by vehicles with combustion motor highest sensitivity, optimal alarm threshold and low false alarm rates are ensured by the automatic adjustment to the respective area conditions sensitivity adjustable: 0,002-25 % obs/m max. 1600 mç (one fire compartment) can be monitored max. length of aspiration-pipes: 200 m with 100 bore holes or 250 m with 80 bore holes LC display for operation, alarm and fault integrated dust filter meets the requirements of the VdS up to 127 STRATOS devices can be connected in a network by the integrated RS 485 uninterruptible external current supply 24 V DC 24 V DC 400 ma interfaces RS 485 zone LED s 4 x LED indicators for operation, alarm, fault relay output 3 (alarm, pre-alarm, fault) sensitivity (0,002-25) % obs / m (0,0003-10) µm protection class IP 50 light grey sheet steel dimensions (H x W x D) 372 mm x 427 mm x 105 mm approvals VdS G 203 024 complies with EN 54-13 62

6. special detectors 6.1 aspiration smoke detectors art. 31115 Stratos HSSD-2 standard detector and control module HSSD-2 M-S intelligent smoke detector for building a highly sensitive asirating smoke system for earliest fire detection, including command module for the earliest detection of fire by a laser-detector-chamber with patented artificial intelligence "classifire" with the command module all networking STRATOS devices of one system can be programmed as well as there status can be displayed to monitor clean-rooms as well as contaminated areas and also in areas, which are used by vehicles with combustion motor highest sensitivity, optimal alarm threshold and low false alarm rates are ensured by the automatic adjustment to the respective area conditions sensitivity adjustable: 0,002-25 % obs/m max. 1600 mç (one fire compartment) can be monitored max. length of aspiration-pipes: 200 m with 100 bore holes or 250 m with 80 bore holes LC display 8 x 16 characters, cursor key control panel integrated dust filter meets the requirements of the VdS up to 127 STRATOS devices can be connected in a network by the integrated RS 485 uninterruptible external current supply 24 V DC 24 V DC 400 ma interfaces RS 485 display 8 x 16 characters relay output 3 (alarm, pre-alarm, fault) sensitivity (0,002-25) % obs / m (0,0003-10) µm protection class IP 50 grey aluminium dimensions (H x W x D) 372 mm x 427 mm x 95 mm approvals VdS G 203024, LPCB, CCC complies with EN 54-13 remarks: the project engineering guidelines of the manufacturer has to be considered by the planning of the system all project engineering documents have to be signed by detectomat GmbH art. 31117 Stratos HSSD-2 control module HSSD-2 S command module for programming and displaying all in the network connected STRATOS components LC display 8 x 16 characters, cursor key control panel up to 127 STRATOS devices can be connected in a network by the integrated RS 485 uninterruptible external current supply 24 V DC 24 V DC 450 ma interfaces RS 485 display 8 x 16 Zeichen protection class IP 50 grey aluminium dimensions (H x W x D) 372 mm x 427 mm x 95 mm approvals VdS G 203024, LPCB, CCC complies with EN 54-13 art. 31953 Stratos HSSD-2 control module 19" HSSD-2 S 19" command module in 19" for programming and displaying all in the network connected STRATOS components LC display 8 x 16 characters, cursor key control panel up to 127 STRATOS devices can be connected in a network by the integrated RS 485 uninterruptible external current supply 24 V DC 24 V DC 450 ma interfaces RS 485 display 8 x 16 Zeichen protection class IP 50 grey aluminium dimensions (H x W x D) 3HE mm x 19 x 95 mm approvals VdS G 203024, LPCB, CCC complies with EN 54-13 remarks: without housing 63

6. special detectors 6.1 aspiration smoke detectors art. 31476 Stratos Micra 100 including mounting base Micra 100 max. length of aspiration-pipes: 100 m (2 x 50 m, each with max. 25 bore holes) LC display for operation, alarm, fault integrated dust filter up to 127 STRATOS devices can be connected in a network by the integrated RS 485 uninterruptible external current supply 24 V DC mounting base including connecting flange to ensure the recirculation intelligent aspirating smoke system for building a highly sensitive asirating smoke system for earliest detection, without display for the earliest detection of fire by a laser-detector-chamber with patented artificial intelligence "classifire" to monitor clean-rooms as well as contaminated areas and also in areas, which are used by vehicles with combustion motor highest sensitivity, optimal alarm threshold and low false alarm rates are ensured by the automatic adjustment to the respective area conditions sensitivity adjustable: 0,002-25 % obs/m 26 V DC 400 ma interfaces RS 485 zone LED s 4 x LED indicators for operation, alarm, fault relay output 3 (alarm, pre-alarm, fault) sensitivity (0,002-25) % obs/m (0,0003-10) µm protection class IP 51 grey aluminium dimensions (H x W x D) 180 mm x 300 mm x 85 mm approvals LPCB complies with EN 54-13 art. 31118 Stratos Micra 25 including mounting base Micra 25 max. length of aspiration-pipes: 50 m (25 m at highest sensitivity) LC display for operation, alarm, fault integrated dust filter up to 127 STRATOS devices can be connected in a network by the integrated RS 485 uninterruptible external current supply 24 V DC mounting base including connecting flange to ensure the recirculation intelligent aspirating smoke system for building a highly sensitive asirating smoke system for earliest detection, without display for the earliest detection of fire by a laser-detector-chamber with patented artificial intelligence "classifire" to monitor clean-rooms as well as contaminated areas and also in areas, which are used by vehicles with combustion motor highest sensitivity, optimal alarm threshold and low false alarm rates are ensured by the automatic adjustment to the respective area conditions sensitivity adjustable: 0,002-25 % obs/m 26 V DC 250 ma interfaces RS 485 zone LED s 3 x LED indicators for operation, alarm, fault relay output 3 (alarm, pre-alarm, fault) sensitivity (0,002-25) % obs/m (0,0003-10) µm protection class IP 51 grey aluminium dimensions (H x W x D) 175 mm x 135 mm x 80 mm approvals LPCB complies with EN 54-13 64

6. special detectors 6.1 aspiration smoke detectors art. 30078 aspiration smoke detector ASD-20 aspiration housing to insert one or two conventional or addressable optical smoke detectors applicable in the serial loop3000 and CT 3000 directly connectable to the loop3000 with IOM 3311 2 outputs for alarm and one fault relays pipe system with 25 mm pipe connectable, maximum length 100 m the aspiration pipe is permanent monitored LED display for operation, alarm and fault dust filter is included in the delivery uninterruptible external current supply 24 V DC input voltage 24 V DC stock temperature -10 C up to +70 C humidity < 95 % grey, RAL9999 4000 g polycarbonat dimensions (H x W x D) 314 mm x 254 mm x 115 mm remarks: apirating pipe systems made of PVC are applicable and can be ordered by the local wholesalers art. 32076 aspiration smoke detector ASD-01 aspiration housing to insert one or two conventional or automatic detectors applicable in the serial loop3000 and CT 3000 directly connectable to the loop3000 with IOM 3311 2 outputs for alarm and one fault relays pipe system with 25 mm pipe connectable, maximum length 50 m the aspiration pipe is permanent monitored LED display for operation, alarm and fault dust filter is included in the delivery uninterruptible external current supply 24 V DC input voltage operation temperature humidity dimensions (H x W x D) 24 V DC -10 C up to +60 C 10 up to 95 % RH 165 mm x 250 mm x 240 mm remarks: apirating pipe systems made of PVC are applicable and can be ordered by the local wholesalers 6.2 accessoires for smoke detectors art. 31133 Stratos asirating pipe 3/4" STR-R halogen-free aspiration-pipe for STRATOS aspiration smoke system 3 m pipe plastic, halogen-free, red low coefficient of thermal expansion great flexibility at high capacity refractiveness against chemicals colour rot, 3 m x 3/4" 65

6. special detectors 6.2 accessoires for smoke detectors art. 31135 Stratos 45 deg elbow pipe STR-W45 colour red dimensions (Ø) 3/4" art. 31136 Stratos 90 bend STR-B90 colour red dimensions (Ø) 3/4" art. 31138 Stratos socket STR-M colour red dimensions (Ø) 3/4" art. 31140 Stratos T-piece STR-T colour red dimensions (Ø) 3/4" art. 31141 Stratos socket union STR-V colour red dimensions (Ø) 3/4" art. 31143 Stratos end cap STR-E colour red dimensions (Ø) 3/4" 66

6. special detectors 6.2 accessoires for smoke detectors art. 31948 Stratos adapter 3/4" female to 25 mm male STR-R3/4-25 colour dimensions (Ø) red 3/4" x 25 mm art. 31949 Stratos 25 mm female to 3/4" male adapter STR-R26-3/4 colour red dimensions (Ø) 25 mm x 3/4" art. 31950 Stratos socket 3/4" to 25 mm female STR-RM5 colour dimensions (Ø) red 3/4" x 25 mm art. 32050 Stratos -socket 3/4" to 25 mm STR-RH colour black dimensions (Ø) 3/4" x 25 mm approvals VdS G 206 034 art. 31613 Stratos plug sampling point assembly STR-SK colour dimensions (Ø) 3/4" 67

6. special detectors 6.2 accessoires for smoke detectors art. 31155 Stratos in-line smapling point STR-KK colour dimensions (Ø) 3/4" art. 31156 Stratos patress sampling point STR-KB Mit Befestigungsflasch colour dimensions (Ø) 3/4" art. 31153 Stratos in-line remote sampling point adapter STR-MK colour dimensions (Ø) red 3/4" - 10 mm art. 31154 Stratos end cap adaptor STR-EK colour dimensions (Ø) red 3/4" - 10 mm art. 31151 Stratos nylon tube, red STR-KR red Nylon dimensions (Ø) 10 mm - 3/4" 68 www.detectomat.de

6. special detectors 6.2 accessoires for smoke detectors art. 31152 Stratos nylon tube, STR-KW color dimensions (Ø) nylon 10 mm art. 31145 Stratos pipe clip, red STR-C color red art. 31146 Stratos pipe clip black STR-CA M8 x 60 mm art. 31960 Stratos flange nut STR-CM art. 31148 Stratos pipe cleaner STR-RE 500 ml art. 31147 Stratos solvent cement STR-SK for -pipe, 250 ml art. 31149 Stratos sampling hole warning stickers STR-WA to mark the aspiration drilling points, Selling-packages at 100 pieces 69

6. special detectors 6.3 infrared beam detectors art. 30473 infrared beam detector SPB-E IR BD range 5-100 m monitored area and mounting meets DIN VDE 0833 potential-free relays for alarm and fault three sensitivities: 25, 50 and 70 % sender- and receiver unit connectable on the loop3000 via IOM3311 light and dark smoke can be detected 15 up to 33 V DC 280 µa 20 ma relay output 2 operation temperature -10 C up to +50 C humidity max. 95 % transmitter 450 g, reciever 450 g dimensions (H x W x D) 145 mm x 100 mm x 86 mm approvals VdS G 295004 art. 31096 reset module RM95 reset-board for the use in the loop to control the SB-E IR BD by voltage supply interruption the external detectors can be reset for a system compatible resetting of the detector after abrogate the alarm criterion to connect to the opto-output of the input-module circuit board with connectin clamp included in delivery art. 31095 infrared beam detector FR 2000 light and dark smoke can be detected range 5-100 m monitored area and mounting meets DIN VDE 0833 potential-free relays for alarm and fault three sensitivities: 25, 35 and 50 % sender, receiver and separate analyser connectable on the loop3000 via IOM3311 11,5 up to 28 V DC 14 ma 22 ma relay output 2 x 30 V DC / 1 A operation temperature -20 C up to +55 C stock temperature -25 C up to +60 C protection class IP 50 grey colour Frontfolie grey sheet steel control unit 2140 g dimensions (H x W x D) 265 mm x 210 mm x 85 mm approvals VdS G 297058 complies with EN 54-12 70

6. special detectors 6.3 infrared beam detectors art. 30474 infrared beam detector SRA-ET IR BD-R monitored area and mounting meets DIN VDE 0833 conventional detector (current increase) sender and receiver in a single housing including reflector connectable on the loop3000 via TCM3300 light and dark smoke can be detected range 5-30 m 15 up to 30 V DC 350 µa 50 ma operation temperature -10 C up to +50 C humidity max. 95 % 700 g dimensions (H x W x D) 125 mm x 122 mm x 80 mm approvals VdS G 200080 art. 31861 infrared beam detector FR 50 RV range 5-50 m monitored area and mounting meets DIN VDE 0833 potential-free relays for alarm and fault three sensitivities: 25, 35 and 50 % sender and receiver in a single housing including one prism connectable on the loop3000 via IOM3311 light and dark smoke can be detected 10,2 up to 30 V DC 4 ma 15 ma relay output 2 x 30 V DC / 1 A operation temperature -30 C up to +55 C stock temperature -35 C up to +60 C protection class IP 50 grey 670 g dimensions (H x W x D) 117 mm x 210 mm x 120 mm approvals VdS G 203070 complies with EN 54-12 art. 31486 infrared beam detector FR 100 RV sender and receiver in a single housing including four prism connectable on the loop3000 via IOM3311 light and dark smoke can be detected range 5-100 m monitored area and mounting meets DIN VDE 0833 potential-free relays for alarm and fault three sensitivities: 25, 35 and 50 % (picture similar to art. 31861) 10,2 up to 30 V DC 4 ma 15 ma relay output 2 x 30 V DC / 1 A operation temperature -30 C up to +55 C stock temperature -35 C up to +60 C protection class IP 50 grey 670 g dimensions (H x W x D) 117 mm x 210 mm x 120 mm approvals VdS G 203070 71

6. special detectors 6.4 sensor cable detectors art. 30503 sensor cable detector SKM-03.01 connectable on the loop3000 via IOM3311 display unit to connect up to 300 m sensor cable appropriate to use in adverse surroundings or restricted circumstances (underground car parks, cable channels, etc.) potential-free alarm -and fault output delivery including cable installation box alarm display meets DIN 14623 sensor cable detector for the earliest detection of fire oder overheat in critical envoirements 24 V DC 28 ma 58 ma relay output 2 x 30 V DC / 1 A operation temperature -25 C up to +50 C protection class IP 65 grey 370 g dimensions (H x W x D) 105 mm x 105 mm x 65 mm approvals VdS G 203067 art. 30980 sensor cable red SKM-KRT to connect to sensor cable detector SKM 03 appropriate in normal surrounding conditions without aggressive atmosphere tensile strength: < 200 N design: synthetic-coaxial wire, diameter Ø 3,25 mm, color red approvals VdS G 203067, VdS G 203 077 art. 30981 sensor cable black SKM-KSW to connect to sensor cable detector SKM 04 appropriate in surrounding conditions with aggressive atmosphere tensile strength: < 200 N design: synthetic-coaxial wire, diameter Ø 4 mm, color black protected against acids and bases approvals VdS G 203067, VdS G 203 077 art. 31620 fanstening clamp SK-LS for sensor cable detector to connect the sensor cable time-saving and simple start-up mounting hole diameter Ø 6mm selling-packages at 100 pieces 72

6. special detectors 6.5 flame detectors art. 31897 ultraviolet flame detector FL 80/1A ultraviolet flame detector for an earliest fire detection in the industrial areas and in difficult envoirements for the detection of open fire without smoke development integrated test-unit to check the detector function during operation sikh angle 90-100 sensibility meets EN 54-10 class 1 high speed capability input voltage 24 V DC ± 25 % 24 V DC 45 ma 70 ma relay output 2 x 30 V / 1A operation temperature -20 C up to +80 C protection class IP 54 red aluminium 1400 g dimensions (H x W x D) 155 mm x 120 mm x 110 mm approvals VdS G 28425 intriscally safe class Germanischer Loyd art. 31896 ultraviolet flame detector FL 800/24V-K-N ultraviolet flame detector for an earliest fire detection in the industrial areas and in difficult envoirements for the detection of open fire without smoke development sikh angle variable 30, 60 and 90 sensibility meets EN 54-10 class 1 high speed capability input voltage 19,2 up to 28,8 V 24 V DC 26 ma 46 ma relay output 2 x 30 V / 1A operation temperature -25 C up to +70 C grey protection class IP 54 PC-LEXAN 800 g dimensions (H x W x D) 200 mm x 150 mm x 150 mm 73

6. special detectors 6.5 flame detectors art. 32075 infrared flame detector X 9800 infrared flame detector to ensure the detection of hydrocarbon fires in industrial applications such as turbines, petrochemie, automotive industry, projects with high contamination automatic, optical self-testing microprocessor controlled heated optics reliable detection even in case of more than one fault at the same time detects a n-heptane fire of 0,1m 2 size until a distance of 15 metres high speed capability - 40 milliseconds sikh angle 90 tricolour LED indicates normal operation, fire and fault conditions mounting plate vibration-free after MIL event monitoring over built-in data logging maintenance mode over magnet modular housing design 18 up to 30 V DC 87,5 µa 550 ma interfaces RS485, 4-20mA relay output 2x alarm, 1x fault sensitivity N-Heptan: 0,1 mç in 15 m distance: less than 15 sec Methan: 30 inch flame in 10,5 m distance: less than 10 sec operation temperature -40 C up to +75 C stock temperature -55 C up to +85 C humidity 0 up to 95 % - shortly 100 % humidity in air protection class IP 66 red Aluminium 2700 g dimensions (H x W x D) 119 mm x 122 mm x 246 mm approvals VdS G 203084 intriscally safe class 0538 Ex II 2 GD, ATEX 132195, FM3260 remarks: a shielded cable with a conductor cross section of 0,5mm 2 to 2,5mm 2 is recommended art. 30477 ultraviolet flame detector X 2200 ultraviolet flame detector to ensure the detection of non-hydrocarbon fires in industrial applications such as turbines, hydrogen, ammunition, silane automatic, optical self-testing reliable detection even in case of more than one fault at the same time detects a n-heptane fire of 0,1m 2 size until a distance of 18 metres high speed capability sikh angle 90 tricolour LED indicates normal operation, fire and fault conditions mounting plate vibration-free after MIL event monitoring over built-in data logging maintenance mode over magnet modular housing design 18 up to 30 V DC 104 µa 253 ma interfaces RS485, 4-20mA relay output 2x alarm, 1x fault sensitivity N-Heptan: 0,1 mç in 18 m distance: 1 sec Methan: 30 inch flame in 21 m distance: 1 sec operation temperature -40 C up to +75 C stock temperature -55 C up to +85 C humidity 0 up to 95 % - shortly 100 % humidity in air protection class IP 66 red aluminium 2700 g dimensions (H x W x D) 119 mm x 122 mm x 246 mm approvals VdS G 203083 intriscally safe class 0538 Ex II 2 GD, ATEX 132195, FM3260 remarks: a shielded cable with a conductor cross section of 0,5mm 2 to 2,5mm 2 is recommended 74

6. special detectors 6.5 flame detectors art. 32077 ultraviolet/infrared flame detector Eye 20/20 L environment-specific programming high speed capability sikh angle 90 horizontal and vertically manual and automatic inserting test mode high false alarm security modular housing design ultraviolet/infrared flame detector with combined analysis on UV and IR basis for the safe and failure-free detection of fires ultraviolet-infraret dual sensor reliable detection even in case of more than one fault at the same time 18 up to 32 V DC 100 ma 150 ma interfaces 4-20mA relay output 2x alarm, 1x fault sensitivity N-Heptan 15m, Methan 5m, Benzin 15m, Diesel 11m, Kerosin 11m, 5 sec. operation temperature -40 C up to +70 C stock temperature -55 C up to +85 C humidity up to 95 % protection class IP 66 grey aluminium 3700 g dimensions (H x W x D) 132 mm x 132 mm x 120 mm approvals pending intriscally safe class ATEX EX II 2G, EExd IIB, FM, CSA, ATEX, Gost R und GostK 6.6 intrisically safe detectors art. 31163 ex-ionisation smoke detector IRM Ex S60 radiation 33,3 kbq wind speed 10 m per second conventional ionisation smoke detector in ex-proof design two-chamber principle Am 241 as radioactive source 17 up to 28 V DC 30 µa by 20 V DC humidity 0-95 % 42 mm x 100 mm Ex BAS02, ATEX1288 approvals VdS G 298 044 intriscally safe class BAS02, ATEX1288 75

6. special detectors 6.6 intrisically safe detectors art. 31164 ex-heat detector WM Ex S60 two temperature sensors maximal und differentiated triggering conventional thermal detector in ex-proof design, class 1 17 up to 28 V DC 30 µa by 20 V DC humidity 0-95 % 42 mm x 100 mm approvals VdS G 298 047 intriscally safe class BAS02, ATEX1288 art. 31169 base for ex-detector Meldersockel Ex detector base in ex-proof design operation temperature housing colour intriscally safe class -10 C up to +60 C 20 mm x 95 mm BAS02, ATEX1288 art. 31174 ex-barrier Ex-B1 designed for ex-detectors in one ex detector zone including reverse battery protection for top hat rail mounting operation temperature dimensions (H x W x D) 6 ma -10 C up to +60 C green 93 mm x 20 mm x 110 mm 76

6. special detectors 6.6 intrisically safe detectors art. 31170 ex manual call point HFM S65, Ex for ex-areas until zone 0 for using without ex-barrier conventional ex-proof manual call point 19 up to 28 V DC 20 µa operation temperature -20 C up to +80 C protection class IP 66 red dimensions (H x W x D) 145 mm x 135 mm x 70 mm approvals VdS G 295026 intriscally safe class BAS02, ATEX1288 art. 30217 ex multiple tone sounder DB 5 conventional ex-proofen sounder included DIN tone meets DIN 33404 26 different tones adjustable usable with ex barrier only 24 V DC 12 ma sounder output 100 db protection class IP 65 red 102 mm x 90 mm intriscally safe class BASEEFA-No. 92C2014 Klasse: Eex ia II C art. 30219 ex-barrier SB SE/24 Ex designed for ex-sounder DB 5 electrically particularly designed for ex multiple tone sounder DB5 DIN top hat rail mounting in housing Ex-H each sounder needs one barrier operation temperature housing colour dimensions (H x W x D) -10 C up to +60 C green 6 ma 93 mm x 20 mm x 110 mm 77

6. special detectors 6.6 intrisically safe detectors art. 31222 ex-beacon, red BE 24 R EEx conventional ex-proofen beacon, red beacon Ex, 24 V DC, red with yellow aluminium housing and red cover all purposes beacon with high light performance stainless steel to protect the cover flash energy: 15 Joule 24 V DC 1,0 A operation temperature -20 C up to +40 C protection class IP 67 red aluminium 243 mm x 110 mm intriscally safe class II 2G EEx de IIC T6 art. 31223 ex-beacon, yellow BE 24 Y EEx conventional ex-proofen beacon, yellow beacon Ex, 24 V DC, yellow with yellow aluminium housing and yellow cover all purposes beacon with high light performance stainless steel to protect the cover flash energy: 15 Joule 24 V DC 1,0 A operation temperature -20 C up to +40 C protection class IP 67 yellow aluminium 243 mm x 110 mm intriscally safe class II 2G EEx de IIC T6 art. 30218 housing for ex-modules M-1 to integrate ex-barriers, overload protection components and modules for top had rail mounting to integrate ex-barriers and protocol-interfaces on-wall mounting including 35 mm norm rail, which meets DIN EN 50022 up to 5 barriers can be included protection class IP 65 grey dimensions (H x W x D) 220 mm x 125 mm x 162 mm 78

7. home smoke detectors art. 30458 optical home detector HDv 3000 O automatic fault monitoring of the measuring chamber as well as the battery voltage the acoustic alert is made by an integrated piezo alarm-sounder (> 85 db) a visual and audiable low battery condition is signalled for 30 days up to 40 detectors can be interlinked for reporting fault and alarm conditions the optional plug-in radio module interface offers radio interlinking for reporting fault and alarm conditions via (433 MHz and/or. 868 MHz) the average life span with a 9 V alkaline battery is approximatly 2 years (without interlinking or alarms at 20 C ambient temperature) the pack includes the detector base, battery, screws and anchors battery powerd optical home detector for detection and alarming in domestic applications optical smoke detector for the early detection of smoke private living areas integreated pre alarm levels for an early smoke verification 9V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour 160 g 51 mm x 100 mm approvals VdS G 202042 complies with DIN 14604 remarks: for the usage of radio modules a lithium ion battery is recommended art. 30023 optical home detector HD 3001 O battery powerd optical home detector for detection and alarming in domestic applications features as HDv 3000 O 9V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour 140 g 42 mm x 95 mm approvals VdS G 202054 EN 14604 79

7. home smoke detectors art. 30024 optical home detector HD 3001 O silver simlilar to HDv 3000 O, design 1, silver features as HDv 3000 O 9 V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour silver 140 g 42 mm x 95 mm approvals VdS G 202054 EN 14604 art. 30123 optical home detector HD 3001 O black simlilar to HDv 3000 O, design 1, black features as HDv 3000 O 9 V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour black 140 g 42 mm x 95 mm approvals VdS G 202054 EN 14604 art. 31837 optical home detector HD 3004 O simlilar to HDv 3000 O, design 4, features as HDv 3000 O 9 V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour 140 g 56 mm x 110 mm approvals VdS G 202090 EN 14604 80

7. home smoke detectors art. 31914 optical home detector HD 3004 O silver simlilar to HDv 3000 O, design 4, silver features as HDv 3000 O 9 V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour silver 160 g 56 mm x 110 mm approvals VdS G 202090 DIN 14604 art. 32015 optical home detector HD 3005 O simlilar to HDv 3000 O, design 5, features as HDv 3000 O 9 V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour 160 g 56 mm x 110 mm approvals VdS G 202091 DIN 14604 art. 32004 optical home detector HD 3005 O silver simlilar to HDv 3000 O, design 5, silver features as HDv 3000 O 9 V DC < 16 µa 5 ma interfaces radio link and wire link interface sensitivity < 0,15 db / m humidity 95 % RH / 40 C air speed max. 20 m / s housing colour silver 160 g 56 mm x 110 mm approvals VdS G 202091 EN 14604 81

7. home smoke detectors art. 30933 radio link module FM 868 with the module the detectors can be cascade interlinked without a panel automatic amplifying of the radio signal via the integrated repeater function bidirectional radio module to interlink home detectors in cascaded networks in the transmitting frequency of 868MHz working area in frequency band 868 MHz bidirectional controlling function in case of alarm, signalising of all connected detectors interfaces 37 ma radio link interface to the home detector -10 C bis +60 C operation temperature humidity 95 % RH / 40 C 100 g art. 31674 wireless fire control panel RCP 6 4 potential-free outputs, freely programmable a separate 230 V plug power-pack is included in the delivery emergency batteries 8 x 1,5 V are included LCD display microprcessor controlled radio panel to control home detetectors by wireless network over 433 MHz working area in frequency band 433 MHz 6 zones connection up to 100 home smoke detectors via the module 433 MHz input voltage 230 V AC frequency 50 / 60 Hz 12 V AC emergency power 8 x 1,5 V batteries 30 ma 50 ma display LCD zone LED s 6 zones relay output 4 x change over contact operation temperature 0 C up to +60 C stock temperature -10 C up to +60 C humidity max. 70 % protection class IP 20 housing colour / front colour grey / silver 1000 g dimensions (H x W x D) 170 mm x 170 mm x 55 mm art. 30947 radio link module FM 433 with the module the home smoke detectors can be connected to the fire control panel RCP6 wireless module to connect home detectors to the wireless fire control panel RCP6 in the transmitting frequency of 433 MHz working area in frequency band 433 MHz interfaces 37 ma radio link interface to the home detector -10 C up to +60 C operation temperature humidity 95 % RH / 40 C 100 g 82

8. signalling devices 8.1 signalling devices for loop3000 art. 31836 loop sounder, red LS 3300 R 2 different tones adjustable (including DIN tone) automatic addressing (soft-addressing) manual addressing (EasyCheck) low current multiple tone sounder directly powered by the loop3000, red direct addressable via the loop3000 integrated bidirectional short circuit isolator addressable spur connection via T-branch 15 up to 30 V loop powered 5 ma noise max. 97 db protection class IP 43 housing colour red 340 g 100 mm x 101 mm art. 32012 loop sounder, LS 3300 W 2 different tones adjustable (including DIN tone) automatic addressing (soft-addressing) manual addressing (EasyCheck) low current multiple tone sounder directly powered by the loop3000, direct addressable via the loop3000 integrated bidirectional short circuit isolator addressable spur connection via T-branch 15 up to 30 V loop powered 5 ma noise max. 97 db protection class IP 43 housing colour 340 g 100 mm x 101 mm art. 32060 loopsounder kit LS 3300 VLC shallow base for lateral and rear cable entry low current multiple tone sounder directly powered by the loop3000 via control modul, direct addressable via the loop3000 multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable frequency 440 up to 2900 Hz 15 up to 30 V loop powered 5 ma noise max. 97 db protection class IP 43 housing colour 250 g 27 mm x 117 mm complies with EN 54 83

8. signalling devices 8.1 signalling devices for loop3000 art. 32067 art. 32068 cover for sounder, color red cover for sounder, color AD R AD W art. 32061 loopsounder base kit LS 3300 SBK low current multiple tone sounder directly powered by the loop3000 via control modul, integreated base for addressable detectors of the series loop3000, direct addressable via the loop3000 including detector base for all detectors of the series loop3000 multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable shallow base for lateral and rear cable entry detector not included frequency 440 up to 2900 Hz 15 up to 30 V loop powered 5 ma noise max. 97 db protection class IP 43 housing colour 250 g 45 mm x 117 mm complies with EN 54 art. 30204 sound unit SDM 3300 R shallow base for lateral and rear cable entry sounder to use in the loop3000, low powered multiple-tone sounder with sound-module, according to DIN 33404 addressable connection with external voltage direct connection to the loop3000 integrated automatic addressing-unit integrated bidirectional short circuit isolator addressable spur connection via T-branch external voltage supply 24 V necessary internal sound levels adjustable frequency 500 up to2850 Hz 15 up to 30 V 250 µa 9 up to 29 ma noise 111 db protection class IP 54 housing colour red 340 g 93 mm x 93 mm complies with EN 54 art. 32058 loop beacon, red LB-3300-VXB-R low current beacon unit directly powered by the loop3000 via control modul low current beacon housing with red light cover brightness at 5 ma 0,7 watt and at 3 ma 0,4 watt frequency 1 Hz 15 up to 30 V loop powered 5 ma protection class IP 43 housing colour 145 g 60 mm x 95 mm complies with EN 54 84

8. signalling devices 8.1 signalling devices for loop3000 art. 32090 loop beacon, orange LB 3300 VXB O low current beacon unit directly powered by the loop3000 via control modul low current beacon housing with orange light cover brightness at 5 ma 0,7 watt and at 3 ma 0,4 watt frequency 1 Hz 15 up to 30 V loop powered 5 ma protection class IP 43 housing colour 145 g 60 mm x 95 mm complies with EN 54 8.2 conventional signalling devices art. 32051 multiple tone sounder, red VTG-32-SB R shallow base for lateral and rear cable entry low powered multiple-tone sounder, colour: red, modern technology with 32 different tones multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable frequency 440 up to 2900 Hz 15 up to 35 V DC 9 up to 36 ma noise max. 111 db operation temperature -20 C up to +70 C protection class IP 43 housing colour red 220 g 85 mm x 94 mm approvals VdS G 205137 complies with EN 54 art. 32053 multiple tone sounder, VTG-32-SB W shallow base for lateral and rear cable entry low powered multiple-tone sounder, colour:, modern technology with 32 different tones multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable frequency 440 up to 2900 Hz 15 up to 35 V DC 9 up to 36 ma noise max. 111 db operation temperature -20 C up to +70 C protection class IP 43 housing colour 220 g 85 mm x 94 mm approvals VdS G 205137 complies with EN 54 85

8. signalling devices 8.2 conventional signalling devices art. 32052 multiple tone sounder, red, IP 65 VTG-32-DB R shallow base for lateral and rear cable entry low powered multiple-tone sounder colour: red, modern technology with 32 different tones, class of protection: IP 65 multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable frequency 440 up to 2900 Hz 15 up to 35 V DC 9 up to 36 ma noise max. 111 db operation temperature -20 C up to +70 C protection class IP 65 housing colour red 250 g 102 mm x 94 mm approvals VdS G 205137 complies with EN 54 art. 32054 multiple tone sounder,, IP 65 VTG-32-DB W shallow base for lateral and rear cable entry low powered multiple-tone sounder colour:, modern technology with 32 different tones, class of protection: IP 65 multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable frequency 440 up to 2900 Hz 15 up to 35 V DC 9 up to 36 ma noise max. 111 db operation temperature -20 C up to +70 C protection class IP 65 housing colour 250 g 102 mm x 94 mm approvals VdS G 205137 complies with EN 54 art. 32055 base sounder Verso 32 Tone shallow base for lateral and rear cable entry low powered multiple-tone sounder, colour:, modern technology with 32 different tone multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable frequency 440 up to 2900 Hz 15 up to 35 V DC 9 up to 36 ma noise max. 111 db operation temperature -20 C up to +70 C protection class IP 43 housing colour 250 g 27 mm x 117 mm complies with EN 54 86

8. signalling devices 8.2 conventional signalling devices art. 32067 art. 32068 cover for sounder, color red cover for sounder, color AD R AD W art. 30216 symphony tone sounder SYS 120 R multiple-tone sounder, colour: red, modern technology with 32 different tones multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 500 Hz up to 2850 Hz are synchronizable 3 sound levels adjustable strong sound with up to 120 db frequency 500 up to 2850 Hz 9 up to 28 V DC 230 up to 290 ma noise max. 120 db operation temperature -25 C up to +55 C protection class IP 43 housing colour red 340 g dimensions (H x W x D) 106 mm x 106 mm x 95 mm approvals VdS G 206026 complies with EN 54 art. 31664 voice sounder CLA R sounder with voice-announcement, high voice quality, standard announcement stored sounder with voice announcement multifunction alarm sounder adjustable volume base is compatible to sounders and beacons high quality of the sound rendition standard announcements are stored in the database automatic synchronization low current consumption input voltage 18 up to 30 V DC 18 up to 30 V DC 20 ma noise 102 db operation temperature -10 C up to +55 C protection class IP 65 housing colour red 265 g 83 mm x 95 mm complies with EN 54 art. 31665 voice sounde CLA W sounder with voice-announcement, high voice quality, standard announcement stored sounder with voice announcement multifunction alarm sounder adjustable volume base is compatible to sounders and beacons high quality of the sound rendition standard announcements are stored in the database automatic synchronization low current consumption input voltage 18 up to 30 V DC 18 up to 30 V DC 20 ma noise 102 db operation temperature -10 C up to +55 C protection class IP 65 housing colour 265 g 83 mm x 95 mm approvals pending complies with EN 54 87

8. signalling devices 8.2 conventional signalling devices art. 31193 LED indicator PA alarm indicator for flush mounted detectors connection to the detector base on-wall mounting LED indicator for alarm display of the automatic detectors series loop3000 and CT housing colour dimensions (H x W x D) 4 ma 84 mm x 84 mm x 35 mm art. 31195 LED indicator PA2-VdS connection to the detector base on-wall mounting LED indicator for alarm display of the automatic detectors series loop3000 and CT alarm indicator for flush mounted detectors 2,5 ma housing colour dimensions (H x W x D) 86 mm x 86 mm x 45 mm approvals VdS G 294052 art. 30178 LED indicator, flush-mounting PA-uP alarm indicator for flush mounted detectors connection to the detector base flush mounting, installation hole 22 mm diameter LED indicator for alarm display of the automatic detectors series loop3000 and CT housing colour 3 ma 52 mm x 26 mm art. 40100 beacon, red BE 24 conventional beacon unit, red available in the colours red, orange, green and blue brightness 2 joule at 24 V and 1 joule at 12 V IP rating 65 will be achieved with base 40059 red or 40060 frequency 1 Hz 12 / 24 V DC 155 ma protection class IP 54, with additional base IP 65 72 mm x 93 mm approvals VdS G 296014 remarks: when ordering please indicate the color and the operation voltage of the calotte 88

8. signalling devices 8.2 conventional signalling devices art. 30228 round beacon RBE 24 conventional round beacon unit, red available in the colours red and orange brightness 5 joule at 24 V frequency 1 Hz 24 V DC 200 ma protection class IP 54 housing colour 135 mm x 108 mm remarks: when ordering please indicate the color of the calotte art. 32056 beacon, red VXB-1-SB-WB-RL brightness at 5 ma 0,7 watt and at 3 ma 0,4 watt low current beacon unit, red housing, red light low current beacon available in the colours red and orange frequency 1 Hz 20 up to 35 V 3 up to 5 ma operation temperature -20 C up to +70 C protection class IP 43 housing colour 145 g 60 mm x 95 mm remarks: when ordering please indicate the color of the calotte art. 32057 beacon IP 65 VXB-1-DB-WB-RL brightness at 5 ma 0,7 watt and at 3 ma 0,4 watt low current beacon unit, housing, red light, IP 65 low current beacon available in the colours red and orange frequency 1 Hz 20 up to 35 V 3 up to 5 ma operation temperature -20 C up to +70 C protection class IP 65 housing colour 165 g 80 mm x 95 mm remarks: when ordering please indicate the color of the calotte 89

8. signalling devices 8.2 conventional signalling devices art. 32062 sounder beacon combination, VTB-32-SB W low powered multiple-tone sounder with 32 different tones, colour:, combined with beacon red multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable brightness at 5 ma 0,7 watt and at 3 ma 0,4 watt frequency 440 up to 2900 Hz 15 up to 35 V DC 14 up to 41 ma noise max. 109 db operation temperature -20 C up to +70 C protection class IP 43 housing colour 233 g 90 mm x 94 mm art. 32063 sounder beacon combination,, IP 65 VTB-32-DB W low powered multiple-tone sounder with 32 different tones, colour:, combined with beacon red, IP 65 multiple tone sounder with 32 different tones (including DIN tone) adjustable via DIP button tones in the frequency-band of 440 Hz up to 2900 Hz are synchronizable 3 sound levels adjustable brightness at 5 ma 0,7 watt and at 3 ma 0,4 watt frequency 440 up to 2900 Hz 15 up to 35 V DC 14 up to 41 ma noise max. 109 db operation temperature -20 C up to +70 C protection class IP 65 housing colour 258 g 107 mm x 94 mm 90

9. door magnets and accessoires art. 30411 power supply 450 ma SV 04 LED indicator for operation display power supply 450 ma for door magnets integreated short circuit protection input voltage 230 V AC frequency 50 Hz +/- 10 % 24 V DC external user output 400mA operation temperature -10 up to +40 C protection class IP 20 housing colour silver sheet steel dimensions (H x W x D) 115 mm x 80 mm x 50 mm approvals DIBT Z6.5-1335, VdS approved art. 30412 power supply 800 ma SV 08 LED indicator for operation display power supply 800 ma for door magnets integreated short circuit protection input voltage 230 V AC frequency 50 Hz +/- 10 % 24 V DC external user output max 800mA operation temperature -10 up to +40 C protection class IP 20 housing colour sheet steel dimensions (H x W x D) 160 mm x 105 mm x 55 mm approvals DIBT Z6.5-1335, VdS approved art. 30410 door control panel TSZ 0400 up to 3 panels linkable integreated short circuit protection LED indicators for operation, alarm and fault display up to 10 detectors connectable up to 12 door magnets connectable usable in ex-areas with accessoires microprcessor controlled panel to control fire doors, door magnets and detectors integreated power supply for detectors and door magnets alarm evaluation and controlling functions integreated reset function additional external output for connection of signalling devices input voltage 230 V AC frequency 50 Hz +/- 10 % 24 V DC relay output 2 change over 30V / 1A external user output max 800mA operation temperature 0 up to +40 C protection class IP 42 housing colour grey, RAL 9002 dimensions (H x W x D) 185 mm x 233 mm x 93 mm approvals DIBT Z6.5-1646, VdS approved 91

9. door magnets and accessoires art. 31236 optical detector with relay base RM3000 conventional optical smoke detector, complies with EN 54 part 7 specification and relay base for connection on door control panels integreated relay base 3 times alarm evaluation for controlling function LED indicator for operation, alarm and fault display 18 up to 28 V DC 24 ma 62 ma relay output 1 change over 50V / 1A operation temperature -20 C up to +60 C protection class IP 43 housing colour 50 mm x 100 mm approvals DIBT Z6.5-1335, VdS G 200 107 art. 30417 manual activation button HT ap for door control units with on-wall mounting operation temperature housing colour dimensions (H x W x D) -20 C up to +60 C red 63 mm x 63 mm x 37 mm art. 30418 manual activation button HT up for door control units with flush-mounting operation temperature housing colour dimensions (H x W x D) -20 C up to +60 C red 80 mm x 80 mm x 33 mm 92

9. door magnets and accessoires art. 30428 door magnet EM GD 60 F 26 input protection via diode polarisation protected peel adhesion 700N power on time 100% magnet diameter 60 mm door magnet for wall mounting, for door holding integrated activation button 24 V DC ± 10 % 67 ma operation temperature -20 C up to +60 C protection class IP 40 colour grey steel dimensions (H x W x D) 30 mm x 55 mm x 93 mm approvals DIBT Z6.5 1335, VdS approved art. 30422 door magnet EM GD 60 K 70 input protection via diode polarisation protected peel adhesion 700N power on time 100% magnet diameter 60 mm door magnet for wall mounting with plastic-bottom, for door holding integrated activation button 24 V DC ± 10 % 67 ma operation temperature -20 C up to +60 C protection class IP 40 colour grey steel/ 70 mm x 82 mm approvals DIBT Z.6.5-1335, VdS approved art. 30423 door magnet EM GD 60 S 175 input protection via diode polarisation protected peel adhesion 700N power on time 100% magnet diameter 60mm length 175mm, 90 deviated 137 mm panning-head magnet with turnable head to mount at walls, ceilings or floors integrated activation button 24 V DC ± 10 % 67 ma operation temperature -20 C up to +60 C protection class IP 40 colour grey steel 175 mm x 96 mm approvals DIBT Z.6.5-1335, VdS approved 93

9. door magnets and accessoires art. 30424 door magnet EM GD 60 S 325 peel adhesion 700N power on time 100% magnet diameter 60 mm length 325mm, 90 deviated 287 mm panning-head magnet with turnable head to mount at walls, ceilings or floors integrated activation button input protection via diode polarisation protected 24 V DC ± 10 % 67 ma operation temperature -20 up to +60 C protection class IP 40 colour light grey steel 325 mm x 96 mm approvals DIBT Z.6.5-1335, VdS approved art. 30425 door magnet EM GD 60 S 475 peel adhesion 700N power on time 100% magnet diameter 60 mm length 475mm, 90 deviated 437 mm panning-head magnet with turnable head to mount at walls, ceilings or floors integrated activation button input protection via diode polarisation protected 24 V DC ± 10 % 67 ma operation temperature -20 up to +60 C protection class IP 40 colour light grey steel 475 mm x 96 mm approvals DIBT Z.6.5-1335, VdS approved art. 30434 door magnet EM GD 60 FB integrated activation button input protection via diode polarisation protected peel adhesion 700N power on time 100% door magnet with a robust housing of aluminium for base-mounting 24 V DC ± 10 % 67mA operation temperature -20 up to +60 C protection class IP 40 colour black aluminium dimensions (H x W x D) 100 mm x 165 mm x 107 mm approvals DIBT Z.6.5-1335, VdS approved 94

9. door magnets and accessoires art. 30436 door magnet EM GD 70 Ex ex-proof door magnet usable in ex areas with protection class zone 1 and 2 ex proof housing connectable via terminal blocks input protection via diode polarisation protected peel adhesion 1450N power on time 100% 24 V DC 70mA operation temperature -20 C up to +40 C protection class IP 66 colour grey steel dimensions (H x W x D) 110 mm x 75 mm x 43 mm approvals DIBT Z-6.5-1335, Ex II 2G Eex m II T6, IP 66 complies with Ex II 2G EExem II T6 intriscally safe class Eex m/e IIT6 art. 30437 anchor plate AP GD 60 G 16 flexible anchor plate with rubber bearing usable for the connection between door magnet and fire door up to 10 movable zinc housing plate diameter 64 mm colour dimensions (H x W x D) zinc steel 65 mm x 65 mm x 16 mm art. 30438 anchor plate AP GD 60 W 50 flexible anchor plate with rubber bearing and angle joint usable for the connection between door magnet and fire door up to 60 movable zinc housing plate diameter 64 mm colour dimensions (H x W x D) black steel 65 mm x 65 mm x 51 mm art. 30439 anchor plate AP GD 60 T 80 for heavy doors and gates robust black housing flexible anchor plate diameter 64 mm elasticity strength approximately 100 N at 20 mm lift telescope anchor plate with damper usable for the connection between door magnet and fire door colour black steel 85 mm x 80 mm 95

10. detector testing devices art. 31956 smoke detector test & removal set SOLO 812 kit includes the following: 1 fibreglass telescopic extension pole 4,50 metres 1 fibreglass extension pole 1,13 metres 1 universal removal tool 1 aerosol smoke dispenser 1 protective carrying / storage bag art. 14008 aerosol smoke dispenser SOLO 330 smoke dispenser for the release of smoke test aerosol for efficient activation of detectors clear cup - allows view of detector LED spring loaded mechanism for effectiv, economic aerosol delivery touch sensitiv - ideal for suspended ceilings art. 30398 heat detector tester SOLO 461 wire free test set for heat detectors including: cordless heat detector tester 2 battery batons 1 fast charger art. 14007 detector removal tool SOLO 200 detector removal tool for easy replacement of all detectors 96

10. detector testing devices art. 14006 telescope pole SOLO 100 telescope pole, expandable in 4 sections 4 section fibreglass telecope pole expandable from 1,20m up to 4,50m art. 30193 extension pole SOLO 101 fibreglass extension pole 1,13 metres maximum applicable 2 pieces each telescope bar art. 14010 bag for test-set SOLO 610 carrying / storage bag for test equipment designed to fit all test equipment separate pole bag included dimensions (H x W x D) 460 mm x 45 mm x 180 mm art. 40055 testaerosol TA 300 for smoke detectors, 300 ml art. 31845 testaerosol SOLO A3 for smoke detectors, 250 ml 97

Article index art. Typ Description page 14006 telescope pole SOLO 100 97 14007 detector removal tool SOLO 200 96 14008 aerosol smoke dispenser SOLO 330 96 14010 bag for test-set SOLO 610 97 30003 wireless optical smoke detector WL 3200 O 59 30007 optical smoke and heat detector PL 3200 OT 38 30008 heat detector PL 3200 T 37 30009 optical smoke detector PL 3200 O 33 30010 heat detector, isolator PL 3300 T 37 30011 optical smoke detector, isolator PL 3300 O 33 30014 heat detector CT 3000 T 42 30015 optical smoke detector CT 3000 O 39 30021 optical smoke and heat detector, isolator PL 3300 OT 38 30022 multisensor detector CT 3000 OT 42 30023 optical home detector HD 3001 O 79 30024 optical home detector HD 3001 O silver 80 30025 WGW 3300 wireless gateway 59 30026 WGW 3300 HFM EG-Gx 55 30077 Relay board 8 change over RL 58 18 30078 aspiration smoke detector ASD-20 65 30079 CO gas and heat detector, isolator PL 3300 CDBT 39 30087 bitbus interface CP BBI 26 30088 LED indicator modul CP ZM 8 9, 10 30092 optical smoke detector, isolator PL 3300 O/K 36 30096 conventional interface redundant 8 fire zones CP CLI X2-R 15 30097 extension module CP ECB 15 30098 LED indicator modul CP ZM 32 15, 16 30099 mount in printer including paper storage PIP 1 10, 16, 20 30106 mount in printer PIP 2 4, 10, 12, 16, 20 30111 Extinguishing control modul CP ETB X1 10 30112 Redundant main board processor CP CPU X2-R 17 30113 Redundant main board processor CP CPU X1-R 11 30114 extinguishing interface CP SIE 19 30115 OC control module CP AM 32 19 30116 connection board CP AM AP 19 30118 monitored module for 8 outputs SC 8 18 30119 bitbus CPU BB-CPU 26 30120 extension for BitBus CPU, 32 open collector outputs BB-32 26 30122 extension for BitBus CPU, 16 relay outputs BB-16 26, 27 30123 optical home detector HD 3001 O black 80 30124 BitBus amplifier BB-R 27 30128 BitBus LED indicator extension BB-LED 27 30131 power supply 192 W NT 8 21 30136 detectomat programming tool DPT 3000 29 30137 software-expansion-dongle D 3000 29 30138 modem RM MO 23 30139 Bitbus programming tool BPT 26, 29 30143 Visual detect basis software VD Basic 11 31 30144 Visual detect user expansion VD UE 1 32 30145 Visual detect expansion panel VD PE 1 32 30146 Visual detect operation expansion VD CE 1 32 30151 battery 12 V / 45 Ah B 12/ 45Ah 22 30155 battery 12 V / 12 Ah B 12/ 12Ah 21 30156 battery 12 V / 18 Ah B 12/ 18Ah 22 30164 mounting plate MP 16 30167 19" front panel 64 19" FP-1 16 30168 19" front panel 128 19" FP-2 16 30169 19" front panel 192 19" FP-3 16 30178 LED indicator, flush-mounting PA-uP 88 30187 detector mounting adapter MKBD 47 30188 detector flap-mounting adapter MKK 47 30189 detector distance-mounting adapter MAK 48 30190 wall bracket WA4 48 30191 wall bracket WA2 48 30193 extension pole SOLO 101 97 30200 in-/output module IOM 3311 56 30201 2-loop interface redundant DLI 3240 X2-R 14 30204 sound unit SDM 3300 R 84 30205 conventional zone module TCM 3300 58 30209 2-loop interface DLI 3240 X1-2L 7 30210 conventional interface for 8 fire zones CP CLI X1 9 98

Article index art. Typ Description page 30211 output module OMS 3301 57 30216 SYS 120 R symphony tone sounder 87 30217 ex multiple tone sounder DB 5 77 30218 housing for ex-modules M-1 78 30219 ex-barrier SB SE/24 Ex 77 30228 round beacon RBE 24 89 30301 detector base SDB 3000 43 30321 base for overvoltage protection modules CT B 22 30335 Loop protection module CT ME 48 23 30336 Conventional protection module CT ME / C 24 23 30337 Bitbus protection module CT ME 5 23 30386 Adapter for LED indicator modul CP ADB 48 9, 10 30398 heat detector tester SOLO 461 96 30410 door control panel TSZ0400 91 30411 power supply 450 ma SV 04 91 30412 power supply 800 ma SV 08 91 30417 manual activation button HT ap 92 30418 manual activation button HT up 92 30422 door magnet EM GD 60 K 70 93 30423 door magnet EM GD 60 S 175 93 30424 door magnet EM GD 60 S 325 94 30425 door magnet EM GD 60 S 475 94 30428 door magnet EM GD 60 F 26 93 30434 door magnet EM GD 60 FB 94 30436 door magnet EM GD 70 Ex 95 30437 anchor plate AP GD 60 G 16 95 30438 anchor plate AP GD 60 W 50 95 30439 anchor plate AP GD 60 T 80 95 30458 optical home detector HDv 3000 O 79 30461 battery 12 V / 65 Ah B 12/ 65Ah 22 30469 detector relay base DRB 3000 44 30471 power supply 120 W NT 5 21 30473 infrared beam detector SPB-E IR BD 70 30474 infrared beam detector SRA-ET IR BD-R 71 30477 ultraviolet flame detector X 2200 74 30479 labelling tag for detector base MBC 47 30488 optical smoke detector, isolator, silver PL 3301 O silver 34 30501 I-Check 3000 software I-Check 3000 29 30503 sensor cable detector SKM-03.01 72 30513 mini in-/output module AMD 3311 57 30523 detector base, black SDB 3000 black 43 30525 optical smoke detector, isolator, black PL 3301 O black 34 30545 optical smoke detector, CT 3004 O 42 30546 optical smoke detector, silver CT 3004 O silver 41 30551 optical smoke detector, CT 3005 O 41 30552 optical smoke detector, silver CT 3005 O silver 41 30555 optical smoke detector, isolator, PL 3304 O 34 30556 optical smoke detector, isolator, silver PL 3304 O silver 35 30567 optical smoke detector, isolator, PL 3305 O 35 30568 optical smoke detector, isolator, silver PL 3305 O silver 35 30569 manual call point, chinese PL 3300 MCP-kit 53 30926 detector base, silver SDB 3000 silver 43 30927 ground circuit module CP EM 9 30933 radio link module FM 868 82 30941 conventional fire control panel BMZ 6 32 30947 radio link module FM 433 82 30956 optical smoke detector, isolator, PL 3301 O 34 30977 optical smoke detector CT 3000 O/K 40 30980 sensor cable red SKM-KRT 72 30981 sensor cable black SKM-KSW 72 31024 BitBus computer interface ISA-Slot BBI PC 28 31059 manual call point, PL 3300 PBD--B 49 31060 manual call point, PL 3300 PBD--Y 50 31061 manual call point, ALU PL 3300 PBD- ALU-B 51 31062 manual call point, ALU PL 3300 PBD-ALU-Y 51 31069 glass for manual call point HFM EG-B 55 31083 manual call point, IP 66 CT 3000 PDB-IP66-R 54 31087 manual call point, ALU, blue CT 3000 PBD-ALU-BD 53 31088 manual call point, ALU, yellow CT 3000 PBD-ALU-YD 54 31091 weatherproof housing WG-R 55 31092 weatherproof housing WG-B 55 99

Article index art. Typ Description page 31095 infrared beam detector FR 2000 70 31096 reset module RM95 70 31114 Stratos HSSD-2 standard detector HSSD-2 M 62 31115 Stratos HSSD-2 standard detector and control module HSSD-2 M-S 63 31117 Stratos HSSD-2 control module HSSD-2 S 63 31118 Stratos Micra 25 including mounting base Micra 25 64 31133 Stratos asirating pipe 3/4" STR-R 65 31135 Stratos 45 deg elbow pipe STR-W45 66 31136 Stratos 90 bend STR-B90 66 31138 Stratos socket STR-M 66 31140 Stratos T-piece STR-T 66 31141 Stratos socket union STR-V 66 31143 Stratos end cap STR-E 66 31145 Stratos pipe clip, red STR-C 69 31146 Stratos pipe clip black STR-CA 69 31147 Stratos solvent cement STR-SK 69 31148 Stratos pipe cleaner STR-RE 69 31149 Stratos sampling hole warning stickers STR-WA 69 31151 Stratos nylon tube, red STR-KR 68 31152 Stratos nylon tube, STR-KW 69 31153 Stratos in-line remote sampling point adapter STR-MK 68 31154 Stratos end cap adaptor STR-EK 68 31155 Stratos in-line smapling point STR-KK 68 31156 Stratos patress sampling point STR-KB 68 31163 ex-ionisation smoke detector IRM Ex S60 75 31164 ex-heat detector WM Ex S60 76 31169 base for ex-detector Meldersockel Ex 76 31170 ex manual call point HFM S65, Ex 77 31174 ex-barrier Ex-B1 76 31181 base for humid areas FRS 45 31191 housing for air ducts LKMG 45 31193 LED indicator PA 88 31195 LED indicator PA2-VdS 88 31222 ex-beacon, red BE 24 R EEx 78 31223 ex-beacon, yellow BE 24 Y EEx 78 31236 optical detector with relay base RM3000 92 31312 2-loop interface redundant DLI 3240 X1-R 8 31315 LCD repeater panel LCD-Tableau 25 31318 universal expansion housing UZG-1 11 31320 universal expansion housing UZG-2 17 31476 Stratos Micra 100 including mounting base Micra 100 64 31482 EasyCheck EC 3000 7, 8, 14, 30 31486 infrared beam detector FR 100 RV 71 31589 optical smoke detector, silver CT 3001 O silver 40 31596 parallel indicator display ZPA2002 20 31613 Stratos plug sampling point assembly STR-SK 67 31620 fanstening clamp SK-LS 72 31621 BitBus - fibre optical interface LCON-1 28 31622 fibre optical cable converter LCON-2 28 31625 loop tester LT 3000 30 31626 radio field analyzer RFA 3000 61 31627 wireless input module WL 3210 EM 60 31640 mini output module OMS 3301mini 57 31651 manual call point,, blue CT 3000 PBD--B 53 31654 Visual detect interface management system VD M I 32 31664 voice sounder CLA R 87 31665 voice sounder CLA W 87 31668 manual call point, ALU PL 3300 PBD-ALU-R 50 31669 manual call point, PL 3300 PBDH--R 49 31674 wireless fire control panel RCP 6 82 31675 manual call point,, red CT 3000 PBDH--R 52 31676 manual call point, ALU, red CT 3000 PBDH-ALU-R 53 31684 flush-mounting adapter silver DR45 41, 46 31698 wall mount base adapter APS 45 31817 1-loop interface DLI 3240 X1-1L 7 31836 loop sounder, red LS 3300 R 83 31837 optical home detector HD 3004 O 80 31845 testaerosol SOLO A3 97 31861 infrared beam detector FR 50 RV 71 31867 Stratos HSSD-2 standard detector without display HSSD-2 MOD 62 31875 base with heating APSB 46 100

Article index art. Typ Description page 31896 ultraviolet flame detector FL 800/24V-K-N 73 31897 ultraviolet flame detector FL 80/1A 73 31910 glass for manual call point HFM EG 55 31911 demo software for visual detect VD DV 31 31914 optical home detector HD 3004 O silver 81 31926 optical smoke detector, black CT 3001 O black 40 31929 optical smoke detector, CT 3001 O 40 31946 mounting plate CP MP 3004 10 31947 mounting plate CP MP 3016 16 31948 Stratos adapter 3/4" female to 25 mm male STR-R3/4"-25 67 31949 Stratos 25 mm female to 3/4" male adapter STR-R26-3/4" 67 31950 Stratos socket 3/4" to 25 mm female STR-RM5 67 31953 Stratos HSSD-2 control module 19" HSSD-2 S 19" 63 31956 smoke detector test kit SOLO 812 96 31959 detector base, bridged SDBB 3000 43 31960 Stratos flange nut STR-CM 69 31972 fire control panel shallow detect 3004 - shallow 5 31973 fire control panel detect 3004 4 31974 language kit German LK 3004 D 6 31975 language kit English LK 3004 GB 6 31989 fire control panel detect 3016 12 31990 fire control panel 19" rack mount detect 3016-19" 13 31991 language kit German LK 3016 D 13 31992 language kit English LK 3016 GB 13 32004 optical home detector HD 3005 O silver 81 32005 antenna for extended range WGA 3200 60 32012 loop sounder, LS 3300 W 83 32015 optical home detector HD 3005 O 81 32039 language kit German for a master panel in the BitBus network LK ABF D 24 32040 language kit English for a master panel in the BitBus network LK ABF GB 24 32045 optical smoke detector PL 3200 O/K 36 32049 fire control panel 19" rack mount detect 3004-19" 6 32050 Stratos -socket 3/4" to 25 mm STR-RH 67 32051 multiple tone sounder, red VTG-32-SB R 85 32052 multiple tone sounder, red, IP 65 VTG-32-DB R 86 32053 multiple tone sounder, VTG-32-SB W 85 32054 multiple tone sounder,, IP 65 VTG-32-DB W 86 32055 base sounder Verso 32 Tone 86 32056 beacon VXB-1-SB-WB-RL 89 32057 beacon IP 65 VXB-1-DB-WB-RL 89 32058 loop beacon, red LB-3300-VXB-R 84 32060 loopsounder kit LS 3300 VLC 83 32061 loopsounder base kit LS 3300 SBK 84 32062 sounder beacon combination, VTB-32-SB W 90 32063 sounder beacon combination,, IP 65 VTB-32-DB W 90 32066 monitored module for 4 outputs SC 4 18 32067 cover for base sounder AD R 84, 87 32068 cover for base sounder AD W 84, 87 32070 flush-mounting adapter DR45W 46 32073 extension module UBW 3311 56 32074 in-/output module mini AOM 3301 58 32075 infrared flame detector X 9800 74 32076 aspiration smoke detector ASD-01 65 32077 ultraviolet/infrared flame detector Eye 20/20 L 75 32082 manual call point,, red SBDH--R 54 32083 detector base, bridged SDBB 3000 black 43 32084 detector base, bridged SDBB 3000 silver 43 32085 detector relay base DRB 3000 black 44 32086 detector relay base DRB 3000 silver 44 32090 loop beacon, orange LB 3300 VXB O 85 32091 piezo buzzer for detectors Sockel Piezo 44 32098 2-loop interface active DLI 3240 P X1 8 32099 2-loop interface active, redundant DLI 3240 P X2-R 14 32118 remote display- and control panel ABF 24 32119 remote display- and control panel ABF 19" 25 40001 battery 12 V / 26 Ah B 12/ 26Ah 22 40003 Extinguishing control modu CP ETB X2l 17 40054 key for manual call point HFM-SCH-M 55 40055 testaerosol TA300 97 40056 battery 12 V / 7,2 Ah B 12/ 7,2Ah 24 40100 beacon BE 24 89 101

Terms & Conditions of Sale detectomat GmbH 1 General Controlling Provisions 1. No terms and conditions other than our Terms and Conditions of Sale contained herein shall apply unless expressly approved in writing by us. Our Terms and Conditions of Sale shall also apply in the event we make delivery to the customer without objection although aware of the existence of terms and conditions of the customer that differ from our Terms and Conditions of Sale. 2. All agreements made between us and the customer in connection with the execution of this agreement are contained herein in writing. This agreement may not be altered, supplemented or amended unless agreed to in writing. 3. Our Terms and Conditions of Sale shall apply to transactions with businessmen ( Unternehmer ) in the sense of Section 14 German Civil Code, legal entities and public institutions. 4. Our Terms and Conditions of Sale shall also apply to all present and future commercial relations with the customer. 2 Acceptance of Orders 1. Our offers are subject to change. We reserve the right to make reasonable technical changes or changes in design, color and/or. 2. In the case of orders pursuant to Section 145 German Civil Code (BGB), we may at our option accept such orders within 2 weeks of receipt. 3. Unless specified otherwise in these Terms and Conditions of Sale or in our written confirmation, the INCOTERMS shall apply in the version effective as of the date of this agreement. 4. Delivery is contingent upon correct and timely delivery of necessary s or merchandise to us ( Obtaining supplies oneself clause ). We will inform the customer without delay in the event of non-availability and promptly refund any payment received. 5. All rights to illustrations, drawings, calculations and other documents shall remain our property. This shall also apply to any written s designated as confidential. The customer shall obtain our express approval in writing before making any such s available to other parties. 3 Prices Terms of Payment 1. Unless specified otherwise in our written confirmation, our prices are ex works (exw) and exclusive of packing, which will be invoiced separately. 2. We reserve the right to modify our prices accordingly in the event of increases or decreases in costs, including but not necessarily limited to increases or decreases due to wage agreements or changes in the prices of s. We will document any such changes at the customer s request. 3. In the event delivery is to be made more than four months from the date of acceptance of the order or cannot be made earlier for reasons for which the customer is exclusively responsible, we reserve the right to invoice the appropriate price as of the date of delivery instead of the original price agreed upon. 4. Our prices are exclusive of applicable value added tax (VAT). Applicable value added tax will be included separately in the invoice on the billing day. 5. Unless specified otherwise in our written confirmation, the customer shall pay the net purchase price (with no deductions) within 10 days of receipt of the invoice, at which time the invoice shall become due and payable. Legal remedies shall apply in the case of past due accounts. 6. The customer may offset amounts due to the customer only if the corresponding counterclaims are unappealable or undisputed or recognized by us. In addition, the customer may exercise the right to withhold payment only in the case of counterclaims in connection with the same transaction. 4 Delivery Delayed Acceptance Delayed Delivery 1. Delivery dates are subject to timely receipt by us of all documentation to be supplied by the customer, required permits and approvals, including but not necessarily limited to plans, and are also subject to performance of other obligations by the customer. If these conditions are not fulfilled in due time, delivery shall be delayed accordingly. This shall not apply in the event of delays for which we are responsible. 2. Our obligation to make delivery is contingent upon timely and proper performance of the customer s obligations. We reserve the right at our option to consider failure to perform (Section 320 German Civil Code - BGB) and impairment of performance (Section 321 German Civil Code - BGB) as events of default. 3. We may make partial delivery if no undue convenience is caused to the customer. 4. In the event delivery or shipment is delayed by the customer by more than one month from the date of announcement to the effect that the merchandise is ready for delivery or shipment, we may invoice the customer for storage charges in the amount of 0.5% of the price of the respective merchandise per month or any fraction thereof, in which case such charges may not exceed a total of 5%. The parties to the agreement may claim higher or lower storage costs if any difference can be documented. 5. In the event the customer delays acceptance or fails to perform other obligations, we may at our option claim reimbursement for any related damages sustained by us, including but not necessarily limited to reimbursement for additional expenses, without prejudice to further claims. 6. In the event of a situation pursuant to Section 5 above, risk of loss or damage shall pass to the customer upon the occurrence of any such dlay or default on the part of the latter. 7. All acts of God (e.g. mobilization, war, insurrection, strikes, lockout or similar events) beyond our control shall release us from performance of our contractual obligations for the duration of any such occurrences. We will immediately inform the customer of our inability to perform our obligations under the agreement and promptly refund to the customer any corresponding payment received by us. In the event the duration of such an occurrence exceeds a period of three months, we may cancel the agreement. 8. In the event delivery is delayed by us, our liability is limited to that prescribed by law if the underlying purchase agreement specifies a firm delivery date in the sense of Section 286 (2) 4 German Civil Code (BGB) or Section 376 German Commercial Code (HGB) pertaining to non-fulfillment. We are also liable as prescribed by law in the sense that the customer may claim that it is no longer interested in further performance due to a delay in delivery caused by us. 9. We are also liable as prescribed by law for any delivery delay due to breach of the agreement due to willful or gross negligence. We assume responsibility for acts of negligence on the part of our representatives or agents. In the event the delivery delay is not due to breach of the agreement through willful negligence by us, our liability is limited to claims for damage that normally could have been anticipated. 10. We are also liable as prescribed by law in the event delivery is delayed through breach of a obligation under the agreement through negligence. In such cases, however, liability is limited to claims for damages normally could have been anticipated. 11. In addition, we are liable for a flatrate penalty for delayed delivery in the amount of 0.5% of the price of the respective merchandise per entire week, which penalty may, however, not exceed a total of 5%. 12. Any other legal rights and remedies the customer may have shall remain in effect. 102

Terms & Conditions of Sale detectomat GmbH 5 Cancellation 1. The customer may cancel the agreement as allowed by law only in the event of culpable default by us. However, in the case of defects (Section 7 below), legal remedies shall apply. 2. The customer shall in the event of default by us inform us within a reasonable period after being asked to do so by us whether it intends to cancel the agreement due to the event of the default or whether it insists upon delivery. 6 Transfer of Risk of Loss or Damage 1. Unless specified otherwise in our written confirmation, our prices are understood to be ex works (exw). 2. We reserve the right to ship merchandise from locations other than the place of delivery. At the request of the customer, we will have the merchandise insured during transport, in which case the customer shall bear the corresponding costs. 7 Claims for defects 1. Claims for defects may not be made in the event of insignificant deviations from the agreed upon characteristics, insignificant impairment of functionality, normal wear and tear or damage resulting from improper or negligent treatment after risk of loss or damage passes to the customer, excessive use, unsuitable operating consumables, improper site preparation or unusual external factors not provided for in the agreement or in the event of intermittent software problems. In the event of improper modifications or maintenance by the customer, we can assume no responsibility for such modifications or maintenance or the ramifications thereof. 2. The customer s rights in the case of a defect are dependent upon proper inspection and notification in compliance with Section 377 German Commercial Code (HGB). Notification of defects must be made in writing. The customer shall bear the burden of proof in connection with all such claims, including but not necessarily limited to proof of the existence of the defect, the time of occurrence of the defect and timely notification of the defect. 3. In the event of notification of a defect, the customer may withhold payment only in a reasonable amount with respect to the extent of the defect. The customer may not refuse to accept delivery in the event of insignificant defects. 4. In the event of a defect, we may at our option repair the defective merchandise or deliver new merchandise free of defects to replace the original merchandise. 5. In the event the repair is unsuccessful, the customer may at its option cancel the agreement or request a reduction in price. In the event of negligible defaults, including but not necessarily limited to negligible defects, the customer may not cancel the agreement. 6. We are liable as prescribed by law for claims made by the customer based on willful or gross negligence on the part of our representatives or agents. In cases other than intentional breach of the agreement, our liability for damages is limited to claims for damages that normally could have been anticipated. 7. We are liable as prescribed by law in the event we commit a breach of the agreement. In such cases, however, our liability for damages is limited to claims for damages that normally could have been anticipated. 8. We assume liability for injury to the life, body or health through negligence on our part. This also applies to compulsory liability pursuant to product liability legislation ( Produkthaftungsgesetz ). 9. Any other form of liability not specified above is excluded. 10. Claims for defects must be reported within 12 months. In the event the newly manufactured product is a structure or is on the basis of its normal function used for a structure and has caused a defect in such a structure, an exception will be made and the period for reporting claims will be extended to 36 months. Our legal liability pursuant to Sections 6 and 8 and in the case of willful deceit shall not be affected. 11. The period for reporting claims pursuant to Sections 478 and 479 German Civil Code (BGB) shall not be affected and shall extend for a period of five years from the date of delivery of the defective item. Recourse against us pursuant to Section 478 German Civil Code BGB (recourse of customer) is only possible in the event the customer has not made any agreement with its customer that goes beyond legal liability for defects. 8 General Liability 1. Liability for damages other than that provided for in Section 7 is excluded, regardless of the legal nature of the claim, including but not necessarily limited to claims for damages due to negligence in connection with the acceptance of the order, other breaches of obligations or claims for damages to property pursuant to Section 823 German Civil Code (BGB). 2. The exclusion pursuant to Section 8.1 above also applies in the event the customer claims reimbursement for needlessly incurred expenses instead of damages. 3. Insofar as liability for damages is excluded or limited, this shall also apply to claims for damages against our employees, representatives and agents. 9 Usage of software and firmware industrial property rights 1. The customer has the non-exclusive right to use the standard software and firmware, with the agreed performance characteristics, in an unmodified form and within the agreed devices. The customer may make a backup copy of the standard software without the need for an express agreement. 2. The goods supplied by us are subject to industrial property rights (e.g. patent rights, trademark rights and ownership rights). The customer shall, in the case of applying or using the goods, respect our industrial property rights, as well as the industrial property rights of third parties. 10 Retention of Title 1. We retain title to the merchandise until all payments from business with the customer are made in full. In the event the customer has an account with us, our reservation of title also applies to any acknowledged outstanding balance, and the same applies in the event a balance is not acknowledged and a balance is made for cause, for example, in the event of bankruptcy or insolvency by the customer. 2. In the event of breach of this agreement by the customer, including but not necessarily limited to failure to make payment when due, we may retake possession of the merchandise sold without canceling the agreement beforehand. The customer hereby agrees to allow us to enter its business premises during normal business hours to retake possession of the items in question in any such situation. After retaking possession of the items sold, we may dispose of them and credit the proceeds, less appropriate disposal costs, to the outstanding balance due us. 3. The customer shall take proper care of the merchandise and shall have the merchandise adequately insured at new value at its own expense against fire damage, flood damage and theft. In the event maintenance and inspections are necessary, the customer shall have such work caried out on a timely basis at its own expense. 103

Terms & Conditions of Sale and references detectomat GmbH 4. In the event of attachment or any other such proceeding initiated by third parties, the customer shall inform us in writing so that we can take action pursuant to Section 771 Code of Civil Procedure (ZPO). In the event any such third party is not in a position to reimburse us for legal and extrale-gal expenses resulting from such an action pursuant to Section 771 Code of Civil Procedure (ZPO), the customer shall bear any such expenses. 5. The customer may resell the merchandise in the normal course of its business. However, the customer shall assign the full invoiced amount (including VAT) due from its customer or other parties from the sale to the outstanding balance due to us; and this condition shall apply whether or not the merchandise purchased from us is sold without or after processing. The customer shall remain authorized to collect the amount due after assignment to us. Our right to make collection ourselves remains unaffected. However, we agree to refrain from making collection as long as the customer applies the proceeds from the sale to meet its payment obligations toward us, is not in arrears and, in particular, no insolvency proceeds have been opened against the customer and the customer has not suspended payment. In any such event, we may demand that the customer make known to us the assigned receivables and the corresponding debtors, provide all information required for collection, make available the corresponding documents and inform the debtors (third parties) of the assignment. 6. The processing or modification by the customer of the merchandise is in all cases performed for us. In the event the merchandise is processed with other objects that are not our property, we acquire partial ownership of the object in proportion to the value of the merchandise (total invoice amount, including VAT) as compared with that of the other processed objects at the time of the processing. In addition, the same reservation of title that applies for the merchandise also applies for the object that results from the processing. 7. In the event the merchandise is inextricably combined with objects that are not our property, we acquire partial ownership of the new object in proportion to the value of the merchandise (total invoice amount, includ-ing VAT) as compared with that of the other combined objects at the time they are combined. In the event the combination is such that the property of the customer is to be considered the main product, it is agreed that the customer shall transfer proportionate ownership rights to us. The cutomer shall then hold the resultant sole or partial property for us. 8. The customer shall also assign to us those amounts due from third parties as a result of the attachment of the merchandise to real estate property to secure amounts due to us. 9. In the event the reservation of title or assignment is not effective in the jurisdiction in which the object is located, it is agreed that the security corresponding to reservation of title or assignment in that jurisdiction shall obtain. If the creation of this security requires actions on the part of the customer, the latter shall at our request take any and all measures required to create and maintain such rights at its own expense. 10. We agree to release securities in our favor at the request of the customer in the event the realizable value of sure securities exceeds the value of the secured amounts due by more than 10%. We may determine at our own discretion which securities to release. 11 Support and Assistance If, in addition to supplying merchandise, we also provide the customer with support and/or assistance with the installation/start-up of the merchandise, the limitation of liability described in Sections 7 and 8 shall apply accordingly. 12 Venue Place of Delivery Governing Law 1. This agreement shall be subject to the exclusive jurisdiction of the courts of our principal place of business in the event the customer is a businessman in the sense of Section 14 German Civil Code (BGB), a legal entity or a public institution. We may, however, file suit against the customer before the courts of the customer s principal place of business. 2. In the event the customer is a businessman in the sense of Section 14 German Civil Code (BGB), a legal entity or a public institution and nothing is specified to the contrary in our written confirmation, our principal place of business shall be the place of delivery. 3. This agreement shall be governed by the laws of the Federal Republic of Germany. Application of the United Nations Convention on Contracts for the International Sale of Goods (1980) CISG is expressly excluded. 4. In the event of differences of opinion arising from these Terms and Conditions of Sale or in the case of doubt, the original German-language version and it alone shall be legal and binding. Terms & Conditions of Sale detectomat GmbH, revised 15. August 2006 Technical Modifications Due to continuous development of our products, together with altering manufacturing methods, the descriptions and data provided are for information only and subject to changes without notice. Information given in the catalogue We accept no responsibility for the accuracy of the information and prices given in the catalogue. Our prices are exclusive of applicable value added tax (VAT). Applicable value added tax will be included separately in the invoice on the billing day. Updates you will find at detectomat GmbH An der Strusbek 5, 22926 Ahrensburg, Germany Amtsgericht Lübeck, HR B 4645 AH President: Dipl.-Ing. Eduard J. Job CFO: Dipl.-Ing. Bodo Müller 104

detectomat GmbH An der Strusbek 5 D-22926 Ahrensburg Germany detectomat GmbH Werk Bielefeld Elpke 106 108 D-33605 Bielefeld, Germany JOB GmbH Kurt-Fischer-Straße 30 D-22926 Ahrensburg Germany Tel.: +49 (0) 4102 2114 60 Fax: +49 (0) 4102 2114 670 E-Mail: info@detectomat.de Web: Tel.: +49 (0) 521 924 31 0 Fax: +49 (0) 521 924 31 50 E-Mail: info@detectomat.de Web: Tel.: +49 (0) 4102 2114 0 Fax: +49 (0) 4102 2114 70 E-Mail: JOB@Job-Bulbs.com Web: www.job-bulbs.com The Group