Bose L1 Model II Single B2 w/t1 Bose_L1_Model_II_5159d15dc668e.jpg Rating: Not Rated Yet Price Variant price modifier: Base price with tax: Price with discount: $3,198.00 Salesprice with discount: 1 / 5
Sales price: $3,198.00 Sales price without tax: $3,995.00 Discount: $-797.00 Tax amount: Ask a question about this product Manufacturer: Bose Description Recommended for audiences up to 500 24-speaker articulated line array delivers 180-degree horizontal sound coverage Produces the most consistent tonal balance with little volume drop-off over distance System's interconnecting pieces allow for efficient transport, easy setup and breakdown One B2 bass module included Boost your performance with the L1 Model II system, our most advanced portable amplification system for musicians, DJs and public speakers. The loudspeaker delivers 180 degrees of horizontal sound coverage and our smoothest tonal balance across the stage and throughout the room. Includes one B2 bass module for more flexibility and even greater power at the low end. Like the original, award-winning Bose L1 system, the Model II sound system is an all-in-one innovation that replaces conventional monitors, mixers and PA speakers. And this professional sound system is packed with proprietary Bose technologies designed to improve your amplified sound. Sound advantages only from Bose The system's breakthrough loudspeaker produces wide, uniform sound coverage of nearly 180 degrees onstage and throughout an audience of up to several hundred with little dropoff in volume and tone. The Model II system also features Articulated Array speaker technology for better tonal balance. The loudspeaker's 24 vertically mounted drivers are precisely angled to create clearer highs and more consistent tone in the room. Even people off to the sides of these stage speakers enjoy well-balanced, detailed sound. Full, flexible bass The high-performance B2 bass module delivers greater low-frequency output when you need more powerful bass for larger audiences. The module includes three settings for increased flexibility. The normal setting is ideal for bass guitar or when miking a kick drum. A higher setting is designed for DJ/music playback applications. And the lower setting works well for acoustic guitar and vocals. You can power one B2 bass module on a single L1 power stand. And the optional PackLite power amplifier lets you add a second B2 bass module for maximum low-end power. Easy and efficient The L1 Model II power stand weighs only 24 pounds, and its four retractable legs make it easy to transport and set up. The power stand also has a simplified control section; the single line-level input can be used with instruments, mics, mixers, laptops, MP3 players or DVD systems. All of the system's components are also built to handle the road. The loudspeaker has a rugged, reinforced grille, and each package includes padded carrying bags for major components. Multichannel flexibility The optional T1 ToneMatch audio engine adds four more channels, so you can expand the system and connect additional instruments and microphones. You can also use the ToneMatch engine to fine-tune your sound with powerful, proprietary tone-shaping tools. 2 / 5
Features Spatial Dispersion and Articulated Array speaker technologies in the loudspeaker produce wide, uniform sound coverage. The 24 small drivers are arranged using Articulated Array speaker technology in a slim, vertical enclosure creating nearly 180 degrees of horizontal coverage and consistent tonal balance. Integrated power amplifiers in the power stand provide clean, precise amplification for L1 Model II system with up to two B1 bass modules or one B2 bass module. ToneMatch port on power stand for digital audio and power connection to ToneMatch audio engine. Analog input, trim control and signal/clip LED for line-level analog input via ¼" TRS phone cable. Can be used for instruments or other audio sources like DJ mixers, MP3 players, computers or DVD systems. Bass module out for amplified bass output signal to one or two B1 bass modules or one B2 bass module. L1 system automatically adjusts equalization appropriately when bass modules are connected. 3 / 5
Bass line out delivers post-dsp bass signal output. Accepts ¼" TRS phone cable. Use to connect powered subwoofer, additional amplification system or Bose PackLite amplifier with up to two additional bass modules. Retractable legs provide stability for streamlined power stands and loudspeakers. Four retractable legs fold out of power stand simultaneously for quick setup and compact transport Convenient carry bags one each for the loudspeaker, power stand and bass module make getting to and from your gig that much easier. B2 bass module Highly efficient speaker design features two 10" (13.3 cm), high-output, high-excursion drivers that produce deep, strong bass from a small enclosure. Three level settings provide flexibility of output. When connected to power stand, active equalization circuitry automatically adjusts bass signal appropriately. Compact enclosure is easy to transport, set up and break down. Small footprint takes up considerably less space than traditional bass cabs required for same performance. Interlocking end caps let you securely stack two modules together on their sides. T1 ToneMatch Digital multichannel mixer designed for use with Bose L1 sound systems Features over 100 proprietary ToneMatch presets for instruments and microphones Includes Bose zeq, storable scenes and a suite of studio-class effects Presets and firmware updates available free online Powerful multichannel sound tools for Bose L1 systems, with controls so advanced they adapt to you and your instrument. Four-channel engine features proprietary ToneMatch presets, intelligent zeq and a large suite of professional-quality effects and processors. The T1 ToneMatch audio engine is designed to enrich the sound of musicians using any Bose L1 system. Its powerful features and toneshaping tools quickly bring you closer to the true sound of your voice and instruments. This versatile digital mixer helps you sound your best in live performances. It expands the input capacity of your L1 system and gives you instant access to a host of proprietary EQ presets, standard 4 / 5
effects and processors. Hundreds of sonic refinements instantly The ToneMatch audio engine puts our largest library of customized presets at your command. These ToneMatch presets instantly optimize instruments and microphones for any L1 system, all at the touch of a button. Different presets can be independently assigned to the engine's four channels. For example, select Audix OM5 mic presets for channels 1 and 2, Taylor guitar for channel 3 and Lakland bass for channel 4 all at the same time. Our engineers often work with manufacturers directly to expand the ToneMatch preset library. Updates are available to you free, with easy downloading via the engine's USB port. Intelligent equalization: zeq Fine-tune your sound system with greater accuracy. Bose intelligent zeq redefines low, mid and high ranges for each ToneMatch preset. When you need to cut or boost specific frequency ranges for different instruments and mics, zeq gives you the power. Suite of effects and dynamics processing Globally assign one of five different reverbs to each mic/line channel. You can also choose from three delay types, ten additional effects, and seven dynamics processors and assign them independently to each channel. Custom scenes Store your customized settings for specific gigs with the Scenes feature. The engine comes with five predefined Bose scenes and ten you can define. Fast, one-touch scene recall helps you make quick work of repeat setups. Easy connections Simply link the engine to a Bose L1 Model II system via the included digital cable and rev it up. A sleek bracket is also included to attach the engine to the loudspeaker. When connecting the T1 ToneMatch audio engine to an L1 Compact or Model I system, an analog cable and a T1 power supply are required. Reviews There are yet no reviews for this product. 5 / 5 Powered by TCPDF (www.tcpdf.org)