K Series K Series langed loating all Valves are a prime example of K's reliability, performance, manufacturing and superior engineering techniques at work. eaturing a unibody or two-piece bolted design. eneral Design eatures NA MR015 -(ISO 15156) (Stainless Steel ball/stem configuration) lowout proof stem Weather Seal (lass 600 and higher) Actuator mounting pad (4 bolt machined) API 6D API 60 4th dition* (O-Ring & raphite) Secondary Metal-to-Metal Sealing ull rated bi-directional dead end service Antistatic Device Lockable handle O-Ring design (standard) raphite or Teflon packing (optional) *Not applicable to Teflon packed. Applicable Standards API-American Petroleum Institute Spec. 6D Specification for pipeline valves. Spec. RP6 Recommended practice for fire testing valves. Std. 58 Valve inspection and test.** Std. 60 ire test for soft seated quarter-turn valves. ASM/ANSI-American National Standard 16.5 Steel pipe flanges and flanged fittings. 16.10 ace-to-face and end-to-end dimensions of ferrous valves. 16.4 Steel valves- langed and butt welding ends. -uropean ommunity Marked (P..D. /2/, at. )** ISO-International Org. for Standardization ISO 001: Quality systems-model for quality assurance 2000 in design/development, production, installation and servicing. ISO 15156 Materials for use in 2S containing environments in oil and gas production. MSS-Manufacturers Standardization Society SP 6 Std. finishes for contact faces of pipe flanges and connecting- end flanges of valves and fittings. SP 25 Standard marking system for valves, fittings, flanges and unions. SP 44 Steel pipeline flanges. SP 55 Quality standard for steel castings visual method. NA-National Assoc. of orrosion ngineers MR015 Sulfide stress cracking resistant metallic materials for oilfield equipment. (Superseded by ISO 15156) **P.O.A. consult factory. Range and Design Availability lass/onfiguration 150 00 600 00 1500 1P 1 1 /2 P 2RP 2P 2 1 /2 RP RP P 4RP 4P 6RP 6P 8RP 8P 10 RP 10 P 12 RP nibody ontents Split ody eatures & Design Availability...................... Applicable Standards............................. Design eatures.................................. 4 Part Number odes............................... 5 O-Ring Style loating all Valves omponent Parts, lass 150 & 00.................. 6 omponent Parts, lass 600, 00 & 1500.............. Dimensional Data nibody all Valves lass 150 & 00............... 8, Split ody all Valves lass 150 & 00........... 10, 11 Split ody all Valves, lass 600, 00 & 1500......... 12 ngineering Data................................ 1 Topworks & Stem Torque...................... 14, 15 K Series langed loating all Valves
K Series Design eatures lowout Proof Stem Internally inserted, backseated stem assures fire safety and blow-out prevention by retaining stem in the valve at all pressures. Stem Journal Lubrication All valves incorporate external stem lubrication. A vented weather seal allows safe pressure relief in event of excessive grease gun pressure. lass 150 & 00 lass 600 & higher lass 600 & higher onductive raphite Washer and Spring for Stem-to-ody, and Stem-to-all ontact. Antistatic Device A conductive spring and a graphite washer provide antistatic continuity throughout the valve. onductive Spring and Plunger for Stem-to-ody, and Stem-to-all ontact. Antistatic Device 1" bore - 4" bore, cl. 600, 00 & 1500 use spring-loaded pins between the ball, stem, and body to provide antistatic continuity throughout the valve. lass 150 & 00 (O-Ring shown, packing also available.) lass 600 & higher ody all Adapter Or Retainer iresafe Seat Sealing In event of fire and seat destruction, ball floats downstream to effectively provide metal-to-metal seat sealing. Low Pressure Sealing igh Pressure Sealing Positive Low & igh Pressure Sealing or Devlon and T4 Seats A special integral seat lip provides positive low pressure bubble-tight sealing between the ball and seat with minimal operating torque. The K seat lip defects slightly at higher pressures to ensure full seat contact with the ball. The seat s memoryaction provides bubble-tight sealing at both low and high pressures. This self compensation for swell feature results in low torque and long life operation. 4 K Series langed loating all Valves
K Series omponent Parts, lass 150 & 00 11 11 11 11 25 28 26 25 28 26 20 20 24 24 10 2 D 2 8 22 0 21 11D 11A 8 22 0 11 10 21 A 1 4 5 2 1 1 5 4 6 16 2 Parts List, nibody 1 ody 2 Seat Retainer Stem 4 all 5 ody Seal Seat 8 Inner Stem O-Rngs*** Outer Stem O-Rings*** 10 Thrust Washer 20 Liner 21 round Spring 22 Stem Seal: land or Packing 2 round Washer* *Not required with raphoil packing in iresafe valves. **Required in 2" and larger packed valves only. ***Not used in packed stem valves. 24 Retainer 25 ollower 26 Stud, ollower 28 Nut, ollower 0 Stem Washer** A Lock Plate T-andle Tube T-andle ub D Lock Washer Screw, ex Screw, ex Screw, Square Parts List, Split ody 1 ody 2 Adapter Stem 4 all 5 ody asket 6 ody O-Ring*** Seat 8 Inner Stem O-Rngs*** Outer Stem O-Rings*** 10 Thrust earing 11A Lock Plate 11 T-andle Tube 11 T-andle ub 11D Lock Plate Screw *Not required with raphoil packing in iresafe valves. **Required in 2" and larger packed valves only. ***Not used in packed stem valves. 11 Lock Plate Lock Washer 11 andle ub Screw 11 Tube Lock Screw 16 ex Nut 1 Stud 20 ollower Liner 21 round Spring 22 Stem Seal: land or Packing 2 round Washer* 24 Packing ollower 25 Packing Retainer 26 Packing Stud 28 Packing Nut 0 Stem Washer** 6 K Series langed loating all Valves
K Series omponent Parts, lass 600, 00 & 1500 11 12 1 10 16 6 8 Parts List 1 1 4 1"P thru 4"RP lass 600, 00 & 1500 5 2 1 ody 2 Adapter Stem 4 all 5 ody Seal 6 Stem earing Seat 8 Stop Screw Stem Seal 10 Thrust earing 11 andle Assembly 12 Stop Plate 1 Retainer 16 ex Nut 1 Stud Weather Seal 22 10 11 1 21 2 24 12 8 6 18 1 14 5 1 4"P thru 8"RP lass 600 4 2 16 Parts List 1 ody 2 Adapter Stem 4 all 5 ody Seal 6 Stem earing* Seat 8 Stop Screw* Stem Seal 10 Thrust earing 11 andle Assembly* *4" ore Only **6" ore Only 12 Stop Plate* 1 Retainer* 14 Adapter Pilot Seal 16 ex Nut 1 Stud 18 Lube itting 21 round Spring** 22 iresafe Stem Packing 2 round Plunger* 24 round Spring* Weather Seal K Series langed loating all Valves
K Series nibody, Dimensional Data, lass 150 & 00 2"- 6" seable Stem lats ±. 06 ASM 16.5 lange Dimensional Data, 2"-6", lass 150, Reduced Port Dimension A D (lbs.) 2 1.50.00.2 6.00.6 5.6 1.00.0 2.1 1.6 2.42 8.00.46.50 4.8 6.05 1.00.0.06 1.5 4.00.00 4.10.00 6.5 8.8 22.00 1.8 4.4 54.2 6 4.50 10.50 5.25 11.00 8.56 10.55 22.00 1.44 6.02 1.0 Dimensional Data, 2"-6", lass 00, Reduced Port Dimension A D (lbs.) 2 1.50 8.50.2 6.50.6 5.6 1.00.0 2.1 26.0 2.42 11.12.6 8.25 4.8 6.05 1.00.0.06 46.0 4.00 12.00 4.10 10.00 6.5 8.8 22.00 1.8 4.4 0.0 6 4.50 15.88 5.25 12.50 8.56 10.55 22.00 1.44 6.02 15.0 8 K Series langed loating all Valves
K Series nibody, Dimensional Data (mm), lass 150 & 00 2"- 6" seable Stem lats ±. 06 ASM 16.5 lange Dimensional Data (mm), 2"-6", lass 150, Reduced Port Dimension (mm) A D (kg) 2 8.1 1.8 8.1 152.4. 16.1 41.8 1.8 58..8 61.5 20.2 8. 10.5 111. 15. 41.8 1.8. 14.2 4 6.2 228.6 104.1 228.6 11.5 224. 558.8 5.1 112.5 24.58 6 114. 266. 1.4 2.4 21.4 268.0 558.8 6.6 152. 62.14 Dimensional Data (mm), 2"-6", lass 00, Reduced Port Dimension (mm) A D (kg) 2 8.1 215. 8.1 165.1. 16.1 41.8 1.8 58. 11. 61.5 282.4 100.6 20.6 111. 15. 41.8 1.8. 20.8 4 6.2 04.8 104.1 254 11.5 224. 558.8 5.1 112.5 1.5 6 114. 40.4 1.4 1.5 21.4 268.0 558.8 6.6 152. 1.21 K Series langed loating all Valves
K Series Split ody, Dimensional Data, lass 150 & 00 1" 1 1 /2" - 10" JD JD L Y V oles W ole Dia. X olt ircle 1 Dimensional Data, 1"- 12", lass 150 Dimension A D 1 J L V W X Y (lbs.) 1 x 1 1.00 5.00 2.1 4.25.50 5.44 6.1 1.2.586 1.6 4.6.1 1.0 1 1 /2x1 1 /2 1.50 6.50 2.6 5.00.6 5.5. 15.50.640.05.8 2.1 4.6.88 6.00 6.50 12.8 2x2 2.00.00.02 6.00 4.51 6.56 8.20 15.50.640.05.44.14 4.5 4.5 6.00 6.50 1.6 2 1 /2x2* 2.00.50 2.4.00 4.8 6.06 8.50 1.00.8/.81.06 4.5 5.50.5 x.00 8.00.50.50 6.81 10.25 11.6 20.00 1.28 1.06/1.062.44 4.4 4.5 6.00 6.00 6.50 1.5 4x4 4.00.00 4.00.00 8.40 11.00 1.08 20.00 1.28 1.21/1.16.62 5.88 8.5.50 8.00.00 54.2 6x6 6.00 15.50.5 11.00 10.81 11.12 15.6 20.00 1.45 1.515/1.510.5 8.00 8.88.50 8.00.50 1 8x 6 6.00 11.50 5.1 1.50 10.81 11.12 15.6 20.00 1.45 1.515/1.510.5 8.00 8.88.50 8.00.50 210 8x8 8.00 18.00.00 1.50 14.25 18.26 2.2 1./1.4.62.64 8.88.50 12.00.50 4 10x 8 8.00 1.00 6.50 16.00 14.25 18.26 2.2 1./1.4.62.64 12 1.00 14.25 12.00.50 55 10 x10 10.00 21.00 10.50 16.00 1.41 22.5.06 2.4/2.4.62 11.1 12 1.00 14.25 16.00 11.50 685 12 x10 10.00 14.00.00 1.00 1.41 22.5.06 2.4/2.4.62 11.1 12 1.00 1.00 16.00 11.50 806 *or design artwork, refer to page 12. Dimensional Data, 1"- 10", lass 00 Dimension A D 1 J L V W X Y 1 x 1 1 6.50.50 4.88.50 5.44 6.1 1.2..586 1.6 4.5.50 22.0 11/2x11/2 1.50.50.5 6.1.6 5.5. 15.50.640.05.8 2.1 4.88 4.50 6.00 6.50 20.0 2x2 2.00 8.50 4.25 6.50 4.51 6.56 8.20 15.50.640.05.44.14 8.5 5.00 6.00 6.50 26.0 21/2x2* 2.00.50 4.6.50 4.8 6.06 8.50 1.00.8/.81.06 8.88 5.88 4. x.00 11.1 5.82 8.25 6.81 10.25 11.6 20.00 1.28 1.06/1.062.44 4.4 8.88 6.6 6.00 6.50 46.0 4x4 4.00 12.00 6.00 10.00 8.40 11.00 1.08 20.00 1.28 1.21/1.16.62 5.88 8.88.88 8.00.00 0.0 6x6 6.00 15.88.4 12.50 12.5 15.6 2.2 1.50/1.45.62 8.12 12.88 10.6 12.00.50 15.0 8x 6 6.00 16.50 6.6 15.00 12.5 15.6 2.2 1.50/1.45.62 8.12 12 1.00 1.00 12.00.50 25 8 x 8 8.00 1.5.88 15.00 16.00 21.14.06 2.4/2.42.62 10.52 12 1.00 1.00 16.00 11.50 624 10x 8 8.00 18.00 6.25 1.50 16.00 21.14.06 2.4/2.42.62 10.52 16 1.1 15.25 16.00 11.50 24 *or design artwork, refer to page 12. (lbs.) 10 K Series langed loating all Valves
K Series Split ody, Dimensional Data (mm), lass 150 & 00 1" 1 1 /2" - 10" JD JD L Y V oles W ole Dia. X olt ircle 1 Dimensional Data (mm), 1"- 12", lass 150 Dimension (mm) A D 1 J L V W X Y (kg) 1 x 1 25.4 12 58. 108.0 88. 18.2 160..5 14. 42. 4 16.0.5. 1 1 /2x1 1 /2 8.1 165.1 5.2 12. 146.1 18.2. 16. 1.. 58. 4 16.0 8.6 152.4 165.1 5.8 2x2 50.8 1.8 6. 152.4 115.0 166.6 208.. 16. 1. 11.2.8 4 1.1 120. 152.4 165.1 8.0 2 1 /2x2* 50.8 10.5 4. 1.8 111. 15. 215. 25.4 22.1/22.12. 4 1.1 1. 1.0 x 6.2 20.2 88. 10.5 1.0 260.4 25.4 508 2.5 2.10/26. 11.2 112.5 4 1.1 152.4 152.4 165.1 14. 4x4 101.6 228.6 101.6 20.2 21.4 2.4 2.2 508 2.5.55/.4 15. 14.4 8 1.1 10.5 20.2 228.6 24.6 6x6 152.4. 16. 2.4 24.6 282.4.0 508 6.8 8.48/8.5 1.1 20.2 8 22.4 241. 20.2 241. 62.1 8x 6 152.4 22.1 10. 2.4 24.6 282.4.0 508 6.8 8.48/8.5 1.1 20.2 8 22.4 241. 20.2 241. 5. 8x8 20.2 45.2 228.6 42. 62.0 46.8 5. 50.2/50.65 15. 244. 8 22.4 241. 04.8 241. 216.4 10x 8 20.2 0.2 165.1 406.4 62.0 46.8 5. 50.2/50.65 15. 244. 12 25.4 62.0 04.8 241. 252. 10 x10 254 5.4 266. 406.4 442.2 52.. 6.42/6.2 15. 02.5 12 25.4 62.0 406.4 22.1 10. 12x 10 254 55.6 1.8 482.6 442.2 52.. 6.42/6.2 15. 02.5 12 25.4 41.8 406.4 22.1 65.6 *or design artwork, refer to page 12. Dimensional Data (mm), 1"- 10", lass 00 Dimension (mm) A D 1 J L V W X Y 1 x 1 25.4 165.1 88. 124.0 88. 18.2 160..5 14. 42. 4 1.1 88. 10.0 11/2x11/2 8.1 10.5 8. 155.. 146.1 18.2. 16. 1.. 58. 4 22.4 114. 152.4 165.1.1 2x2 50.8 215. 108.0 165.1 115.0 166.6 208.. 16. 1. 11.2.8 8 1.1 12 152.4 165.1 11.8 21/2x2* 50.8 241. 11.1 10.5 111. 15. 215. 25.4 22.1/22.12. 8 22.4 14.4 1.8 x 6.2 282. 14.8 210.0 1.0 260.4 25.4 508 2.5 2.10/26. 11.2 112.5 8 22.4 168.4 152.4 165.1 20. 4x4 101.6 04.8 152.4 254 21.4 2.4 2.2 508 2.5.55/.4 15. 14.4 8 22.4 200.2 20.2 228.6 1.8 6x6 152.4 40.4 201. 1.5 2..0 5. 4.5/4.40 15. 206.2 12 22.4 20.0 04.8 241. 1.2 8x 6 152.4 41.1 168.4 81 2..0 5. 4.5/4.40 15. 206.2 12 25.4 0.2 04.8 241. 124. 8 x 8 20.2 501. 251.0 81 406.4 5.0. 6.42/6.0 15. 26.2 12 25.4 0.2 406.4 22.1 28.0 10x 8 20.2 45.2 158.8 444.5 406.4 5.0. 6.42/6.0 15. 26.2 6 28. 8.4 406.4 22.1 28.4 *or design artwork, refer to page 12. (kg) K Series langed loating all Valves 11
K Series Split ody, Dimensional Data (in., mm), lass 600, 00 & 1500 1"P - 6"RP A Port D V No. oles W ole Dia. X olt ircle 6"P - 8"RP Dimensional Data (in., mm), 1"P-8"RP, lass 600 J L D A Port * Y* *Refer to data sheets or consult factory for dimensional data. Dimension Ring A /R /RTJ /R /RTJ D J L V W X (lbs.) roove 1P 1 81/2 8 1/2 /4 /4 4 /8 4 /16 5 /8 1/16.62/.621 1 11/16 4 /4 1/2 25 R-16 11/2P 1 1/2 1/2 1/2 /8 /8 6 1/8 15/16 5 5/8 8 1/2 1.8/.81 25/8 4 /8 4 1/2 0.4 R-20 2RP 11/2 11 1/2 11 5/8 4 /16 4 1/2 6 1/2 15/16 5 5/8 8 1/2 1.8/.81 25/8 8 /4 5 5 R-2 2P 2 111/2 11 5/8 4 /16 4 1/2 6 1/2 4 /8 6 1/16 8 1/2 1.8/.81 1/16 8 /4 5 41.5 R-2 21/2RP 2 1 1 1/8 415/16 5 1/2 4 /8 6 1/16 8 1/2 1.8/.81 1/16 8 /8 5 /8 52. R-26 RP 2 14 14 1/8 6 61/16 8 1/4 4 /8 6 1/16 8 1/2 1.8/.81 1/16 8 /8 6 5/8 61.6 R-1 P 14 14 1/8 5 /4 51/16 8 1/4 521/2 1/4 15 1 1/4 1.248/1.246 4 8 /8 6 5/8 8.1 R-1 4 RP 1 1 1/8 /4 1/16 10 /4 521/2 1/4 15 1 1/4 1.248/1.246 4 8 1 8 1/2 1.8 R- 4 P 4 1 1 1/8 8 1/2 8 /16 10 /4 81/2 1/2 48 111/16 1.1/1. 1/2 6.5 8 1 8 1/2 16 R- 6RP 4 22 22 1/8 11 111/16 14 81/2 1/2 48 111/16 1.1/1. 1/2 6.5 12 1 1/8 11 1/2 45 R-45 6 P 6 22 22 1/8 11 111/16 14 11/4 2/8 2.4/2.42 5/8 825/2 12 1 1/8 11 1/2 42 R-45 8RP 6 26 26 1 /8 1 1 1 /16 16 1 /2 11 /4 2 /8 2.4/2.42 5/8 8 25 /2 12 1 1 /4 1 /4 62 R-4 Dimension (mm) Ring A /R /RTJ /R /RTJ D J L V W X (kg) roove 1P 25.4 215. 215. 5. 5. 12.8 6.2 106.4 14.2 20.6 15.82/15. 42. 4 1.1 88. 11. R-16 11/2P 8.1 241. 241. 8.4 8.4 155.6 100.0 142. 215. 25.4 22.1/22.12 66. 4 22.2 114. 1.8 R-20 2RP 8.1 22.1 25. 112. 114. 165.1 100.0 142. 215. 25.4 22.1/22.12 66. 8 1.1 12.0 15. R-2 2P 50.8 22.1 25. 112. 114. 165.1 111.1 154.0 215. 25.4 22.1/22.12.8 8 1.1 12.0 18.8 R-2 21/2RP 50.8 0.2.4 125.4 12 10.5 111.1 154.0 215. 25.4 22.1/22.12.8 8 22.2 14.2 24.0 R-26 RP 50.8 55.6 58.8 152.4 154.0 20.6 111.1 154.0 215. 25.4 22.1/22.12.8 8 22.2 168. 2. R-1 P 6.2 55.6 58.8 146.1 14.6 20.6 14. 184.2 81.0 1.8 1.0/1.65 101.6 8 22.2 168. 40.4 R-1 4RP 6.2 41.8 45.0 16. 18.4 2.1 14. 184.2 81.0 1.8 1.0/1.65 101.6 8 25.4 215. 60. R- 4P 101.6 41.8 45.0 215. 21.5 2.1 218. 241. 121.2 42. 45.4/45.0 12. 165.1 8 25.4 215. 5. R- 6RP 101.6 558.8 562.0 2.4 281.0 55.6 218. 241. 121.2 42. 45.4/45.0 12. 165.1 12 28.6 22.1 156 R-45 6P 152.4 558.8 562.0 2.4 281.0 55.6 28.5.0 6.4/6.0 15. 22.0 12 28.6 22.1 14 R-45 8RP 152.4 660.4 66.6 0.2 1.8 41.1 28.5.0 6.4/6.0 15. 22.0 12 1.8 4. 05 R-4 Note: s 1"P-6"RP is weight w/handle. s 6"P-8"RP is weight w/gear operator. Dimensional Data (in., mm), 1"P-2"P, lass 00 & 1"P, lass 1500 Dimension Ring A /R /RTJ /R /RTJ D J L V W X (lbs.) roove 1P 1 10 10 4 /4 4 /4 5 /8 1/16 4 1/2 5 /8 1 1/8.62/.621 2 4 1 4 28 R-16 2RP 11/2* 141/2* 145/8* 1/4* 5/16* 81/2* 15/16* 55/8* 81/2* 11/16*.8/.81* 25/8* 8* 1* 61/2* 42.* R-24* 2P 2* 141/2* 14 5 /8* 1 /4* 5 /16* 8 1 /2* 4 /8* 6 1 /16* 8 1 /2* 1 1 /16*.8/.81* 1 /16* 8* 1* 6 1 /2* 51.2* R-24* Dimension (mm) Ring A /R /RTJ /R /RTJ D J L V W X (kg) roove 1P 25.4 254.0 254.0 120. 120. 14.2.8 114. 14.2 28.6 15.82/15. 50.8 4 25.4 101.6 12. R-16 2RP 8.1* 68.* 1.5* 184.2* 185.* 215.* 100.0* 142.* 215.* 2.0* 22.1/22.12* 66.* 8* 25.4* 165.1* 1.5* R-24* 2P 50.8* 68.* 1.5* 184.2* 85.* 1215.* 111.1* 154.0* 215.* 2.0* 22.1/22.12*.8* 8* 25.4* 165.1* 2.2* R-24* Note: Weight is w/handle. *lass 00 Only. 1* 12 K Series langed loating all Valves