AP* Chemistry COVALENT BONDING: ORBITALS

Similar documents
Chapter 9 - Covalent Bonding: Orbitals

SHAPES OF MOLECULES (VSEPR MODEL)

Chemistry Workbook 2: Problems For Exam 2

Name: Class: Date: 3) The bond angles marked a, b, and c in the molecule below are about,, and, respectively.

LCAO-MO Correlation Diagrams

Chapter 9. Chemical reactivity of molecules depends on the nature of the bonds between the atoms as well on its 3D structure

Chapter 10 Molecular Geometry and Chemical Bonding Theory

Molecular Geometry and VSEPR We gratefully acknowledge Portland Community College for the use of this experiment.

Valence Bond Theory: Hybridization

Bonding Models. Bonding Models (Lewis) Bonding Models (Lewis) Resonance Structures. Section 2 (Chapter 3, M&T) Chemical Bonding

Chapter10 Tro. 4. Based on the Lewis structure, the number of electron domains in the valence shell of the CO molecule is A) 1 B) 2 C) 3 D) 4 E) 5

EXPERIMENT 17 : Lewis Dot Structure / VSEPR Theory

Lesson 3. Chemical Bonding. Molecular Orbital Theory

Hybrid Molecular Orbitals

Vocabulary: VSEPR. 3 domains on central atom. 2 domains on central atom. 3 domains on central atom NOTE: Valence Shell Electron Pair Repulsion Theory

Theme 3: Bonding and Molecular Structure. (Chapter 8)

VSEPR Model. The Valence-Shell Electron Pair Repulsion Model. Predicting Molecular Geometry

Chapter 7. Comparing Ionic and Covalent Bonds. Ionic Bonds. Types of Bonds. Quick Review of Bond Types. Covalent Bonds

Geometries and Valence Bond Theory Worksheet

1.15 Bonding in Methane and Orbital Hybridization

C has 4 valence electrons, O has six electrons. The total number of electrons is 4 + 2(6) = 16.

Question 4.2: Write Lewis dot symbols for atoms of the following elements: Mg, Na, B, O, N, Br.

CHEM 340 CHEMICAL BONDING - in General Lect-07 IONIC COVALENT METAL COVALENT NETWORK

CHEM 101 Exam 4. Page 1

Structures and Properties of Substances. Introducing Valence-Shell Electron- Pair Repulsion (VSEPR) Theory

Chemical Bonding: Covalent Systems Written by Rebecca Sunderman, Ph.D Week 1, Winter 2012, Matter & Motion

Molecular Geometry and Chemical Bonding Theory

Covalent Bonding and Molecular Geometry

Chemistry 105, Chapter 7 Exercises

2. Atoms with very similar electronegativity values are expected to form

7.14 Linear triatomic: A-----B-----C. Bond angles = 180 degrees. Trigonal planar: Bond angles = 120 degrees. B < B A B = 120

Molecular Orbital Theory

Chapter 1 Structure and Bonding. Modified by Dr. Daniela Radu

Molecular Structures. Chapter 9 Molecular Structures. Using Molecular Models. Using Molecular Models. C 2 H 6 O structural isomers: .. H C C O..

Molecular-Orbital Theory

ch9 and 10 practice test

Laboratory 11: Molecular Compounds and Lewis Structures

AP Chemistry A. Allan Chapter 8 Notes - Bonding: General Concepts

5. Structure, Geometry, and Polarity of Molecules

CHAPTER 5: MOLECULAR ORBITALS

A pure covalent bond is an equal sharing of shared electron pair(s) in a bond. A polar covalent bond is an unequal sharing.

CHEM 101/105 BONDING (continued) Lect-16

CH101/105, GENERAL CHEMISTRY LABORATORY

Chem 121 Problem Set V Lewis Structures, VSEPR and Polarity

9.7 MOLECULAR ORBITALS

AP* Bonding & Molecular Structure Free Response Questions page 1

CHEM 1211K Test IV. MULTIPLE CHOICE (3 points each)

(a) What is the hybridization at each carbon atom in the molecule? (b) How many σ and how many π bonds are there in the molecule?

Self Assessment_Ochem I

3) Of the following, radiation has the shortest wavelength. A) X-ray B) radio C) microwave D) ultraviolet E) infrared Answer: A

A REVIEW OF GENERAL CHEMISTRY: ELECTRONS, BONDS AND MOLECULAR PROPERTIES

Exercises Topic 2: Molecules

5. Which of the following is the correct Lewis structure for SOCl 2

EXPERIMENT 9 Dot Structures and Geometries of Molecules

Elements in the periodic table are indicated by SYMBOLS. To the left of the symbol we find the atomic mass (A) at the upper corner, and the atomic num

CHAPTER 10 THE SHAPES OF MOLECULES

The Lewis structure is a model that gives a description of where the atoms, charges, bonds, and lone pairs of electrons, may be found.

Chapter 1 Benzene Blues 27

CHEMISTRY Practice Exam #5 - SPRING 2014 (KATZ)

Visualizing Molecular Orbitals: A MacSpartan Pro Experience

CHEMISTRY BONDING REVIEW

Molecular Geometry and Bonding Theories

4.2. Molecular Shape and Polarity. Lewis Structures for Molecules and Polyatomic Ions

CHEMISTRY 113 EXAM 4(A)

Bonding & Molecular Shape Ron Robertson

CHAPTER 10 THE SHAPES OF MOLECULES

CHAPTER 6 REVIEW. Chemical Bonding. Answer the following questions in the space provided.

Molecular Geometry and Hybrid Orbitals. Molecular Geometry

LEWIS DIAGRAMS. by DR. STEPHEN THOMPSON MR. JOE STALEY

PRACTICE PROBLEMS, CHAPTERS 1-3

Where Is My Lone Pair?

Worksheet 14 - Lewis structures. 1. Complete the Lewis dot symbols for the oxygen atoms below

Electron Arrangements

Unit 3: Quantum Theory, Periodicity and Chemical Bonding

Chapter 8 Basic Concepts of the Chemical Bonding

Health Science Chemistry I CHEM-1180 Experiment No. 15 Molecular Models (Revised 05/22/2015)

: : Solutions to Additional Bonding Problems

CHAPTER 10 THE SHAPES OF MOLECULES

Sample Exercise 8.1 Magnitudes of Lattice Energies

SOME TOUGH COLLEGE PROBLEMS! .. : 4. How many electrons should be shown in the Lewis dot structure for carbon monoxide? N O O

Ionic and Covalent Bonds

List the 3 main types of subatomic particles and indicate the mass and electrical charge of each.

CHEM 1301 SECOND TEST REVIEW. Covalent bonds are sharing of electrons (ALWAYS valence electrons). Use Lewis structures to show this sharing.

Molecular Structure and Polarity

Chemistry 111 Laboratory Experiment 4: Visualizing Molecular Orbitals with MacSpartan Pro (This experiment will be conducted in OR341)

A mutual electrical attraction between the nuclei and valence electrons of different atoms that binds the atoms together is called a(n)

OCTET RULE Generally atoms prefer electron configurations with 8 valence electrons. - Filled s and p subshells

CHAPTER 6 Chemical Bonding

We emphasize Lewis electron dot structures because of their usefulness in explaining structure of covalent molecules, especially organic molecules.

Molecular Models & Lewis Dot Structures

Chapter 2 The Chemical Context of Life

Covalent Bonding & Molecular Orbital Theory

Exam. Name. 1) Chlorine (atomic number = 17) has the electronic configuration:. E) 1s22s22d103s2

POLARITY AND MOLECULAR SHAPE WITH HYPERCHEM LITE

Covalent Bonding & Molecular Compounds Multiple Choice Review PSI Chemistry

Molecular Models Experiment #1

We will not be doing these type of calculations however, if interested then can read on your own

AP CHEMISTRY 2009 SCORING GUIDELINES

Transcription:

AP* Chemistry COVALENT BONDING: ORBITALS The localized electron model views a molecule as a collection of atoms bound together by sharing electrons between their atomic orbitals. The arrangement of valence electrons is represented by the Lewis structure and the molecular geometry can be predicted from the VSEPR model. There are 2 problems with this. 1) Using the 2p and the 2s orbitals from carbon in methane would result in 2 different types of bonds when they overlap with the 1s from Hydrogen. [three 2p/1s bonds and one 2s/2p bond] However, experiments show that methane has FOUR IDENTICAL bonds. Uh, oh.we need to modify the model! 2) Since the 3p orbitals occupy the x, y and z-axes, you would expect those overlaps of atomic orbitals to be at bond angles of 90. Darn those experiments! All 4 angles are 109.5. It s not that the localized electron model is wrong; it s just that carbon adopts a set of orbitals rather than its native 2s & 2p. THIS IS WHY THESE ARE MODELS/THEORIES rather than LAWS!! VALENCE BOND THEORY an extension of the LE model it s all about hybridization! Two atoms form a bond when both of the following conditions occur: 1. There is orbital overlap between two atoms. 2. A maximum of two electrons, of opposite spin, can be present in the overlapping orbitals. Because of orbital overlap, the pair of electrons is found within a region influenced by both nuclei. Both electrons are attracted to both atomic nuclei and this leads to bonding. As the extent of overlap increases, the strength of the bond increases. The electronic energy drops as the atoms approach each other but, increases when they become too close. This means there is an optimum distance, the observed bond distance, at which the total energy is at a minimum. sigma (σ) bond--overlap of two s orbitals or an s and a p orbital or head-to-head p orbitals. Electron density of a sigma bond is greatest along the axis of the bond. maximum overlap: forms the strongest possible bond, two atoms are arranged to give the greatest possible orbital overlap. Tricky with p orbitals since they are directional. hybrid orbitals-- a blending of atomic orbitals to create orbitals of intermediate energy. Methane: all of the C H bonds are 109.5 apart while p orbitals are only 90 apart. Pauling explained: The orbitals on the left are for a carbon atom [no bonding] Once the carbon atom begins to bond with say, H to keep it simple, the atomic orbitals HYBRIDIZE which changes their shape considerably! There s an energy payoff, else they wouldn t behave this way! leads to *AP is a registered trademark of the College Board, which was not involved in the production of, and does not endorse, this product. 2008 by René McCormick. All rights reserved.

Ammonia also has sp 3 hybridization even though it has a lone pair. I find it helpful to think of electron pairs as sites of electron density that can be occupied by either a lone pair or a shared pair. If there are 4 sites then 4 orbitals need to hybridize so use one s and three p s to make FOUR equivalent orbitals named sppp or sp 3 orbitals. [1 s + 3 p = 4 sp 3 orbitals] MULTIPLE BONDING lowers the number of hybridizing orbitals since Unhybridized orbitals are necessary to form the pi bonds Pi (π) bonds--come from the sideways overlap of p atomic orbitals; the region above and below the internuclear axis. NEVER occur without a sigma bond first! may form only if unhybridized p orbitals remain on the bonded atoms occur when sp or sp 2 hybridization is present on central atom NOT sp 3 hybridization. Carbon often does this with N, O, P, and S since they have p orbitals (remember CNOPS?) This is the formation of an sp 2 set of orbitals [3 orbitals formed, 3 sites, 3 letters!]. This molecule would contain a double bond like ethene. The molecule reserves a set of p s to form the π bond. leads to The set of p s that are UNhybridized are not pictured here at left, they are hovering above and below this very page. A different view, without the hydrogens, centering on the C atoms shows the unhybridized p orbitals that are making the sideways overlap necessary to create the double (π) bond. Here s the whole mess altogether: Carbon #1 Carbon #2 OVERLAPPING UNhybridized p-orbitals that form pi bond. Covalent Bonding: Orbitals 2

This is the formation of an sp set of orbitals [2 orbitals formed, 2 sites, 2 letters!]. This molecule would contain a triple bond like ethyne or the double-double arrangement in carbon dioxide. leads to The molecule reserves TWO sets of UNhybridized p s to form the 2 π -bonds. At right, is a picture of the 2 unhybridized p s on the C atom that is about to make a triple bond. The one labeled at the top is in the plane of this page, the other plain p is in a plane perpendicular to this page. (No typo just appropriate use of homonyms; plain vs. plane!) Look at the CO 2 Lewis diagram. The carbon has 2 sites of electron density, each occupied by a double bond, and is therefore sp [2 sites, 2 letters] hybridized while the oxygens have 3 sites [2 lone pairs and a double bond]. The oxygen s have sp 2 hybridization [3 sites, 3 letters]. This should help: HYBRIDIZATION # OF HYBRID ORBITALS GEOMETRY EXAMPLE sp 2 Linear sp 2 3 Trigonal planar sp 3 4 Tetrahedral dsp 3 5 Trigonal bipyramidal d 2 sp 3 6 Octahedral Covalent Bonding: Orbitals 3

Check out Benzene The sigma bond formations The pi bond formations Draw the Lewis structure for benzene: Covalent Bonding: Orbitals 4

Exercise 1 The Localized Electron Model I Describe the bonding in the ammonia molecule using the localized electron model. tetrahedral, sp 3 hybrid Exercise 2 The Localized Electron Model II Describe the bonding in the N 2 molecule. linear, sp hybrid Exercise 3 The Localized Electron Model III Describe the bonding in the triiodide ion (I - 3 ). trigonal bipyramidal arrangement, e- pair geometry, linear molecular geometry central iodine is dsp 3 hybridized Exercise 9 The Localized Electron Model IV How is the xenon atom in XeF 4 hybridized? d 2 sp 3 hybridized Covalent Bonding: Orbitals 5

Exercise 5 The Localized Electron Model V For each of the following molecules or ions, predict the hybridization of each atom, and describe the molecular structure. a. CO b. BF 4 - c. XeF 2 A: linear, sp hybridized B: tetrahedral, sp 3 hybridizied C: trigonal bipyramidal e - pair, Xe dsp 3, linear THE MOLECULAR ORBITAL MODEL Though the molecular orbital model will not be covered on the AP exam, I feel that students should be exposed to a little of this theory for several reasons. 1. Electrons are not always localized as in the VSEPR theory; therefore resonance must be added and explained as best possible. 2. Molecules containing unpaired electrons are not easily dealt with using the localized model. 3. Magnetism is easily described for molecules using the MO theory. (Oxygen is paramagnetic which is unexplained by the localized electron model.) 4. Bond energies are not easily related using the localized model. TERMS TO KNOW: Bonding molecular orbital - an orbital lower in energy than the atomic orbitals from which it is composed.(favors formation of molecule) Antibonding molecular orbital - an orbital higher in energy than the atomic orbitals from which it is composed. (favors separated atoms) represented by a * [The diagram at the top of the next page uses A for antibonding and B for bonding I prefer the *, it has more personality!] Bond order - the difference between the number of bonding electrons and the number of antibonding electrons divided by two. Indicates bond strength. Homonuclear diatomic molecules - those composed of two identical atoms. Heteronuclear diatomic molecules - those composed of two different atoms Paramagnetism - causes the substance to be drawn into a magnetic field; associated with unpaired electrons. Diamagnetic - causes the substance to be repelled by the magnetic field; associated with paired electrons. General Energy Level Sequence for Filling Orbitals Using the MO Theory σ1s 2 σ1s 2 * σ2s 2 σ2s 2 * ( π2p x 2 π2p y 2 )σ2p 2 (π2p x 2 * π2p y 2 *) σ2p 2 * Covalent Bonding: Orbitals 6

If we assume that the molecular orbitals can be constructed from the atomic orbitals, the quantum mechanical equations result in two molecular orbitals MO 1 = 1s A + 1s B MO 2 = 1s A 1s B and Let s start simple. 2 Hydrogen atoms. Where 1s A and 1s B represent the 1s orbitals from the two separated hydrogen atoms. This is actually a simple model to follow. Look at the diagram on the right, each H entered with its lone 1s electron. As they approach each other, their atomic orbitals [two of them] blend to form molecular orbitals [two of them no magic here]. One MO is of high energy and one MO is of low energy. Which will the electrons choose? The LOW, of course! The electrons occupy the lower energy level and thus a bond is formed. The diagram at left uses the symbols we want to use. Try this again with He: Since 4 electrons are involved, the first 2 get to be lazy and go to the low E state, the other 2 must occupy the higher energy state and thus cancel out the bond, therefore He 2 DOES NOT EXIST!! Now bond order can be redefined in this theory: Bond order = number of bonding electrons number of antibonding electrons 2 If the bond order is zero no bond! Covalent Bonding: Orbitals 7

Shall we predict if Li 2 is possible? Li has its valence electrons in the 2s sublevel. Yes! It may also exist. What is its bond order? Can Be 2 exist? Things get slightly more complicated when we leave Be and move to 2p General Energy Level Sequence for Filling Orbitals Using the MO Theory σ1s 2 σ1s 2 * σ2s 2 σ2s 2 * ( π2p x 2 π2p y 2 )σ2p 2 (π2p x 2 * π2p y 2 *) σ2p 2 * The filling order for p s is pi, pi, sigma all bonding, followed by pi, pi, sigma all antibonding. HUND S RULE AND PAULI EXCULSION PRINCIPLES APPLY!! Try to predict the configuration of B 2 Covalent Bonding: Orbitals 8

One of the most useful parts of this model is its ability to accurately predict para- and diamagnetism as well as bond order. This device is used to test the paramagnetism of homonuclear samples. When the electromagnet is on, a paramagnetic substance is drawn down into it and appears heavier on the balance. B 2 is paramagnetic! That means that the pi orbitals are of LOWER energy than the sigma s and Hund s rule demands that the 2 electrons fill the 2 bonding pi orbitals singly first before paring. Will C 2 exist? Will it be para- or diamagnetic? Exercise: Write the appropriate energy diagram using the MO theory for the nitrogen molecule. Find the bond order for the molecule and indicate whether this substance is paramagnetic or diamagnetic. Covalent Bonding: Orbitals 9

If you use the usual models to examine the paramagnetism of oxygen, you d say it was diamagnetic. The truth is that it is paramagnetic. If you pour liquid oxygen into the space between the poles of a strong horseshoe magnet, it says there until it boils away in the warm room! Covalent Bonding: Orbitals 10

Exercise 6 For the species O 2, O 2 +, O 2 -, give the electron configuration and the bond order for each. Which has the strongest bond? Exercise 7 Use the molecular orbital model to predict the bond order and magnetism of each of the following molecules. a) Ne 2 b) P 2 This model also works in heteronuclear molecules. Exercise 8 Use the MO Model to predict the magnetism and bond order of the NO + and CN - ions. Covalent Bonding: Orbitals 11