HIGH PERFORMANCE 5-AXIS VERTICAL MACHINING CENTER

HIGH PERFORMANCE 5-AXIS VERTICAL MACHINING CENTER

1 The high performance YCM FX 380A 5-axis vertical machining center is designed especially for small, complex high-quality parts mainly for aerospace, automotive, medical, job shop and die & mold applications. From roughing to finishing, the FX380A enables manufacturers to reduce setup time and overall lead-time while increasing machining quality and improving precision of complex machining processes.

2

High Rigidity Body Structure Design Extra wide column and base design to ensure best support and cutting rigidity. High quality and rugged MEEHANITE casting maintains optimum accuracy. High Accuracy Axial Movement Linear guideways adopted for fast and smooth axial movement. Pre-tensioned ball screws with direct drive motors achieve high torque and low backlash. Working Envelope ø380 (ø14.96 ) 150 (5.91 ) ø210 (ø8.27 ) Max. Working Envelope 220 (8.66 ) 480 (18.90 ) 70 (2.8 ) 310 (12.20 ) -120º +30º C-axis Rotary 360 Unit: mm (inch) Table Feedrate Accuracy Size: 380 mm Thru Hole: ø80 mm A-axis: 33.3 rev/min. C-axis: 33.3 rev/min. Positioning (A/C): 28/28 sec. Repeatability (A/C): 16/16 sec. C A FEM Finite Element Analysis 3

YCM In-house A/C-axis Rotary Table Rotary table surface leveled at the C-axis center to ensure machining accuracy and easy programming. ø380 mm (ø14.96") table size with ø80 mm (ø3.15") table-through hole design. 150 (+30 / -120 ) A-axis tilting angle increases the ability of machining. Hydraulic or pneumatic cable preparation. Tool Magazine 30T storage capacity is standard. 40T/60T is servo driven. ATC tool door design is standard. Close Open ATC Tool Door 4

YCM In-house IDD Spindle YCM self-manufactured IDD spindle. Powerful 22 kw, 12,000 rpm spindle for hi-power, hi-speed machining. Cooling system design on spindle motor seat, quill, and bearing offers most reliable machining capability. Max. Speed 12,000 rpm (std.) 15,000 rpm (opt.) Power Chart FANUC 12,000 rpm (std.) 15,000 rpm (opt.) 12.98 93.89 11.69 84.56 1min. 5min. 1min. 22 30 12.98 93.89 11.69 84.56 2min. 5min. 2min. 5min. 22 30 18.5 25 5min. 18.5 25 L H 1.50kgf-m 1.22kgf-m 0.89kgf-m 0.61kgf-m 1,500 3,000 8,000 12,000 1,500 4,000 15,000 (rpm) POWER TORQUE (rpm) POWER TORQUE L H 1.43kgf-m 1.20kgf-m 0.97kgf-m 0.71kgf-m 0.49kgf-m HEIDENHAIN kgf-m lb-ft 12.01 87 S6-10% 8.44 61 S6-25% 7.14 52 S6-40% 4.87 35 cont. 12,000 rpm (opt.) S6-10% 18.5kW 24.81HP S6-25% S6-25% S6-40% 11.0kW 14.75HP S6-40% cont. kw HP 22.5 30 20 27 18.4 25 16 21 13 17 7.5 10 kgf-m 5.48 3.90 3.16 2.43 1.83 lb-ft 40 S6-10% 28 S6-25% 23 S6-40% 18 S2-30min. 13.24 cont. 15,000 rpm (opt.) S6-10% S6-25% S6-40% S2-30min. cont. 2.22kgf-m 16 lb-ft kw HP 22.5 30 16 21 13.9 19 13 17 11.1 15 10 13 9.1 12 7.5 10 7 9 5.1 7 L H L H 1,500 3,5504,000 9,930 12,000 rpm 4,000 9,875 12,000 15,000 rpm (rpm) POWER TORQUE (rpm) POWER TORQUE 5

Spindle Oil Cooling Design Oil-air lubrication design applied on each bearing, suitable for spindles with the speed of 12,000 rpm and over to ensure prolonged high speed operations. Oil-air Lubrication System Heat Cooling System BBT40 Spindle Design Spindle and taper dual surface contact. Exceptional cutting rigidity with high accuracy. Longer tool life. Contact Surface Contact Surface BT Taper BBT Taper Backlash occurs after contact Single Surface Contact Spindle Elastic deformation occurs, no backlash Dual Surface Contact Spindle Laser Tool Measurement (opt.) 6

Advantages of 5-axis Machining Enhance precision, quality and efficiency of 3D surface machining. Reduce tool length and increase rigidity to obtain superior machining quality. Cutting with the belly and edge of the tool to increase tool life. Reduce fixture error and lessen workpiece loading/uploading time. Saves manufacturing cost for fixture and electrode costs. Reduces machining process, machining cost while improving productivity. Differences between 3-axis and 5-axis machining 3-axis machine Change fixture Process 1 Change fixture Process 2 Change fixture Process 3 Change fixture Process 4 FX380A Change fixture Process 1 Process 2 Process 3 Change fixture Process 4 Machining Performance 100% 88% 12% Increase Shorten Process Reduce Fixture Cost Improve precision 3-axis Machine FX380A 7

Automation Advantages Increase productivity through unmanned machining. Enhance quality and reliability of products. Reduce non-cutting or change waiting time. 8

by CONTROL High Response AC Digital Servo & Spindle Drives with High Definition Absolute Positioning Encoders AICC II High Speed High Accuracy with Auto Switching On/Off Machining Function JERK Control Function (opt.) High Rigidity Tapping, Helical Interpolation Custom Marco B and Tool Path Graphics Manual Guide i with large Screen Display. (MXP-200FC, opt.) Program File Management for Easy Program Classifying USB Interface for Easy Parameters & CNC Programs Transfer 512KB Memory High Speed Positioning Function (MXP-200FC, opt.) Memory Card Program Edit & Operation (opt.) 3D Interference Check (5-axis Control as Standard) NANO Smoothing Function (opt.) 400 Pairs Tool Offset, 1,000 Total Registered Programs 48 Pairs of Workpiece Coordinate System Extended Parts Program Editing (Cut, Copy, and Paste. Max. 4,000 characters) A remote monitoring system The YCM Production Line Monitoring System i-direct overcomes the limitations of time and distance. This software provides plant operators with instant production status, including production value, output, standby, alarm time, status display and malfunction records of the machine. These data could be browsed online and printed. When incidents occur, i-direct will automatically warn plant operators through e-mail or MMS message. With i-direct Production Line Monitoring System the plant operators can easily keep track of production statuses regardless of time and distance. Single Machine Status Browsing Single Machine Status Browsing Plant Operation Status Monitoring System Chart Machine connection, MMS and e-mail settings Machine Status Time Record 9 Production Status Process Record Production Management Statistics

OPERATION Software Enhancement Exclusively from Pre-machining Preparation Intelligent Tool Data Management Comprehensive tool data management function allows operators to monitor and manage all positions in tool magazine Tool Length Measurement Graphic measuring interface provides automatic tool length measurement function Workpiece Coordinate Calculation Conversational operating window provides convenient and fast setup of workpiece coordinates NEW RENISHAW GUI System (Conversational Graphic Operating Interface) Tool measurement & measurement correction Workpiece measurement Programming NEW i_pattern 15 sets of machining cycle program Reduces program input and memory time Graphic interface & conversational command input CIRCULAR HOLE PATTERN (G120 P1) Function RECTANGULAR HOLE PATTERN (G120 P4) Function GRID HOLE PATTERN (G120 P5) Function Machining High Performance Machining Mode M300 With 5 sets of parameter settings, the users choose the most suitable mode for optimum machining High Speed Machining Mode M400 Increases drilling and tapping speed, reduces machining time for job shop and precision mold machining NEW Tool Load Management Instant tool load monitoring with alarm function Multi-display Fuction Displays 4 statuses simultaneously with configurable status display NEW Tool Life Management Indicates tool status of each group with tool life alert Instant Message Alert Maintenance Pop-up Alarm Display Instantly provides troubleshooting procedure Quick response to alarm Wireless Message Notification Machine status sent to a designated cellphone number. Intelligent Maintenance Provide users with periodic maintenance options and descriptions Instantly provide users with maintenance notifications Counter Function Allow users to keep count of workpieces with the function of overtime cycle alarm provides easy control over machining cycle time YCM WORKPIECE STATUS: COMPLETE 1. Main Counter 2. Periodical Counter 3. Daily Counter 4. Over Cycle Alarm 10

FANUC MXP-200 FB/FC Control Standard Function (5-axis Control) Tilted Working Plane Command Program order automatic exchange X-Y-Z coordinates. Easy program edition, easy machining for Tilted Working Plane. 3D Interference Simulation 3D Interference Simulation function can help to reduce the danger of collision in 5th axis application. FANUC 31i-MB5 Control Exclusive Function STCP ( Smooth Tool Center Point ) Simultaneous 5-axis Machining with tool end / tool side. Smooth motion with tool end by compensating tool direction (Angle of rotary axis) Smooth machining with tool side by smoothing tool posture Tool side Tool center point With high-speed Smooth TCP 3-Dimensional Cutter Compensation 11

HEIDENHAIN itnc 530 HSCI Exclusive Function Heidenhain itnc 530 HSCI Simultaneous 5-axis control TFT color flat-panel display 15-inch Storage medium: SSDR solid state disk with 32 GB Programming in HEIDENHAIN conversational format, with SmarT.NC or according to DIN/ISO Tool Center Point Management (TCPM) Dynamic Collision Monitoring (DCM) 0.5 ms Short block processing time TCPM (Tool Center Point Management) The offset of the tilting axes is compensated so that the tool tip remains on the contour. Tilted Working Plane Command The PLANE function is a powerful function for defining tilted working planes in various manners. Dynamic Collision Monitoring (DCM) Dynamic collision monitoring to protect operators and machine. Kinematic Compensation 1) Position of the rotary axis in the kinematics model of the control. 2) Actual position of the rotary axis. 3) Resulting position error during tilting. 12

Table & Dimensions 448 17.64" 105.98" 2,692 123.62" 3,140 1,350 53.15 21.89" ø380 ø14.96" ø380 ø14.96" 675 26.57 448 17.64" 448 17.64" 45 45 1,020 40.16" 45 125 4.92" 125 4.92" 75 2.95" 75 2.95" ø380 ø14.96" 2,685 105.71 3,360 132.28 448 2,692 17.64" 105.98" 3,140 123.62" 105.98" 2,692 556 1,310 51.57" 810 31.89" 700 27.56" 952 37.48" 12 0.47" 125 4.92" H8 12 0.47" H8 19 0.75" 12 0.47" T 19 0.75" H8 12 T 0.47" 2,210 87.01" 2,510 98.82" 19 0.75" T 8 0.31" T-SLOTS 12 0.47" 75 2.95" 8 0.31" 12 0.47" 8 0.31" 556 21.89" 21.89" 556 21.89" 556 1,020 40.16" 952 37.48" 1,020 40.16" 2,692 105.98" 3,140 123.62" 2,563 100.91 100.91" 2,563 2,328 91.65 91.65" 2328 98.62" 120.47" 2,505 3,060 51.57" 1,310 51.57" 2,505 810 98.62 31.89" 1,310 51.57" 1,310 31.89" 810 31.89" 27.56" 700 27.56" 2,625 103.35 2,210 87.01 810 700 27.56" 700 952 37.48" 1,020 40.16" 952 37.48" 2,210 87.01" 2,510 98.82" 2,210 87.01" 3,060 120.47 UNI 2,510 98.82" 2,210 87.01" 2,510 98.82" 2,625 103.35" 100.91" 2,563 91.65" 2328 Unit: mm inch 98.62" 2,505 120.47" 3,060 13 2,563 100.91" 2,563 100.91" 91.65" 91.65" 2328 2328 2,625 103.35" 98.62" 2,505 120.47" 3,060 98.62" 2,505 120.47" 3,060

Specifications SPINDLE Spindle Speed/Power (std.) FANUC controller Spindle Speed/Power (opt.1) FANUC controller Spindle Speed/Power (opt.2) HEIDENHAIN controller Spindle Speed/Power (opt.3) HEIDENHAIN controller Spindle Taper TRAVEL User-friendly Design 380A 12,000rpm 7.5/11/15/18.5/22kW 10/15/20/25/30HP (cont./30min./10min./5min./1min.) 15,000rpm 7.5/11/15/18.5/22kW 10/15/20/25/30HP (cont./30min./10min./5min./2min.) 12,000rpm 7.5/13/16/22.5kW 10/17/22/30HP (cont./s6-40%/s6-25%/s6-10%) 15,000rpm 7.5/13/16/22.5kW 10/17/22/30HP (cont./s6-40%/s6-25%/s6-10%) BBT40 X-axis Travel 700mm 27.56" Y-axis Travel 520mm 20.47" Z-axis Travel 480mm 18.90" TABLE Table Size/T-Slots Max. Load on Table (Vertical) Max. Load on Table (Horizontal) Available Torque on Table A/C AXIS A-axis C-axis A/C Axis Feedrate A/C Axis Positioning Accuracy A/C Axis Repeatability Accuracy (A-axis Optical Scales is standard) FEEDRATE X/Y/Z Rapid Feedrate Cutting Feedrate ø380mm / 12mm ø14.96" / 0.47" Radial 200kg 441lb 200kg 441lb 30kg-m 217lb-ft 150 (+30 / -120 ) 360 33.3 rev/min. 28sec. 16sec. 36 / 36 / 24m/min 1417.32 / 1417.32 / 944.88ipm 1~10,000mm/min 0.04~393.7ipm ACCURACY ISO 10791-4 JIS B 6338 Positioning 0.010mm 0.00039" 0.003mm 0.00012" Repeatability 0.007mm 0.00028" 0.002mm 0.00008" ATC Tool Magazine Capacity(opt.) Max. Tool Weight 30T (40/60T) 6kg 13.2 lb Max. Tool Length ø76 x 280mm ø3" x 11.02" GENERAL Pneumatic Supplier 5.5kg/cm 2 Power Consumption (Transformer) Machine Weight FANUC: 34kVA (40kVA) HEIDENHAIN: 47kVA (50kVA) 6,210kg Note: The manufacturer reserves the right to modify the design, specifications, mechanisms,etc., to improve the performance of the machine without notice. All the specifications shown above are just for reference. STANDARD ACCESSORIES Tool Kit Work Lamp Pilot Lamp Spindle Air Blast Spindle Air Seal Cutting Air Blast Spindle Cooling System Guideway Cover (X, Y, Z) Oil Skimmer Coolant Gun Coolant System Central Lubrication System Hydraulic Unit (for 4th and 5th Axes) Complete Chip Enclosure (With Top Cover) Leveling Bolts and Pads Heat Exchanger for Electrical Cabinet Mechanical, Maintenance, Electrical and Operating Manuals Safety Door CNC Control: FANUC MXP-200FB OPTIONAL ACCESSORIES CE Foundation Bolts Chip Conveyor Coolant Through Spindle System (CTS) Heavy Duty Coolant Pump Auto Tool Measurement System (Blum Laser Mini NT) CNC Control: FANUC MXP-200FC CNC Control: FANUC 31i-MB5 CNC Control: HEIDENHAIN itnc530 Convenient Swivel Control Panel. Chip flush coolant system increase chips removal efficiency. Tool magazine with window design is easy for tool changing. 14

201305-E02-2000