How Do Mittens Keep You Warm?

Similar documents
Evaluation copy. Energy Content of Foods. computer OBJECTIVES MATERIALS

Maximum value. resistance. 1. Connect the Current Probe to Channel 1 and the Differential Voltage Probe to Channel 2 of the interface.

Lift the Load! Make a lever. Measure the amount of force needed to lift up a book when applying a force at different positions on the lever.

Neutralization Reactions. Evaluation copy

Endothermic and Exothermic Reactions. Evaluation copy. Mg(s) + 2 HCl(aq) H 2 (g) + MgCl 2 (aq)

Solar Homes and Heat Sinks. Evaluation copy. empty bottle with screw-on cap

Pressure -Temperature Relationship in Gases. Evaluation copy. Figure ml Erlenmeyer flask. Vernier computer interface

The Determination of an Equilibrium Constant

Household Acids and Bases

Water Hardness. Evaluation copy

Osmosis. Evaluation copy

Determining the Free Chlorine Content of Swimming Pool Water. HOCl H + + OCl. Evaluation copy

Evaluation copy. Analyzing the Heart with EKG. Computer

Evaluation copy. Enzyme Action: Testing Catalase Activity (Method 1 O 2 Gas Sensor) Computer 2

Heart Rate and Exercise

Monitoring EKG. Evaluation copy

Determining the Quantity of Iron in a Vitamin Tablet. Evaluation copy

Evaluation copy. Build a Temperature Sensor. Project PROJECT DESIGN REQUIREMENTS

Quick Reference Manual

Servo Motors (SensorDAQ only) Evaluation copy. Vernier Digital Control Unit (DCU) LabQuest or LabPro power supply

Evaluation copy. Titration of a Diprotic Acid: Identifying an Unknown. Computer

Weather Under Pressure

Find the Relationship: An Exercise in Graphing Analysis

Project 4.2.1: Heart Rate

Mixing Warm and Cold Water

Effect of Coughing on Heart Rate. Evaluation copy

Welcome to Vernier LabQuest Viewer Software v1.0 Note: LabQuest Viewer Features Set up LabQuest 2 to work with LabQuest Viewer software via Wi-Fi

Heart Rate and Physical Fitness. Evaluation copy

Evaluation copy. Case File 9. A Killer Cup of Coffee? GlobalTech manager dies

Evaluation copy. Figure 1

App and Program Transfer Guidebook

Case File 10. Dropped at the Scene: Blood spatter analysis

Evaluation copy. Blood Pressure. Project PROJECT DESIGN REQUIREMENTS

LAB 06: Impulse, Momentum and Conservation

GRAPH MATCHING EQUIPMENT/MATERIALS

1 One Dimensional Horizontal Motion Position vs. time Velocity vs. time

Using your Bluetooth laptop with the Logitech wireless hub

Heat and Temperature: Teacher s Guide

Unit/Lesson Plan Title: Transfer of Heat: Conduction. Integrated Subjects Math Grade Level(s) 5

The Key to Keywords LESSON PLAN UNIT 1. Essential Question Which keywords will give you the best search results?

Enzyme Action: Testing Catalase Activity 50 Points

Conservation of Momentum Using PASCO TM Carts and Track to Study Collisions in One Dimension

Melting ice Student sheet

LESSON 7: LEARNING MODELS

Materials Needed: Choose one of the following methods depending on how familiar your students are with the internet and how to use it.

Create a report with formatting, headings, page numbers and table of contents

Alfa Romeo 147 Gearbox oil change guide

Classifying Matter. reflect. look out!

Learning outcomes. Students will be able to:

Digital Persona Fingerprint Reader Installation

PHOTOSYNTHESIS AND RESPIRATION

Unit/Lesson Plan Title: Too Hot to Handle! Grade Level(s) 3. Research Sources

Phosphates (ortho- and total)

Lesson Objectives: Identify the parts of the computer, vocabulary for communicating in the lab with lab assistant

Macintosh: Microsoft Outlook Web Access

Enzyme Action: Testing Catalase Activity

Exploring Magnetism. DataQuest

STATIC AND KINETIC FRICTION

Setting up a basic database in Access 2003

I. ABSTRACT II. III. IV.

Activity Sheets Enzymes and Their Functions

Chapter 6, Lesson 4: Temperature and the Rate of a Chemical Reaction

Project Renewable Insulation Example Teacher Notes

Accessing AT&T U-verse Web Remote

[4] SA1.2 The student demonstrates an understanding of the processes of science by observing,

Magnetic Fields and Their Effects

BENCHMAN -XT Machining Center

Students will investigate the characteristics of electromagnetism and then use what they learn to plan and conduct an experiment on electromagnets.

We are going to investigate what happens when we draw the three angle bisectors of a triangle using Geometer s Sketchpad.

Fun ways to group students

Experiment: Static and Kinetic Friction

Cisco Small Business Pro Smart Business Communication System Technical Enablement Labs

Ensuring Success with the Personal Math Trainer Tips for Students and Family Members

Enzyme Action: Testing Catalase Activity

Partnerships Implementing Engineering Education Worcester Polytechnic Institute Worcester Public Schools Supported by: National Science Foundation

Chapter 2, Lesson 5: Changing State Melting

Does your school have that heated rivalry? Why not start an icy rivalry?

Name Total Listening / 100 Total Grammar Part 2 / 50 Total Grammar Part 1 / 50 Grand total / 200

Money Unit $$$$$$$$$$$$$$$$$$$$$$$$ First Grade

Photosynthesis and Respiration

Experiment: Series and Parallel Circuits

3 Energy Content of Food

Enzyme Action: Testing Catalase Activity

Installing Android Wear app on your phone

Welcome to the Reading Workshop. Learning, Loving and Laughing Together

Energy Content of Fuels

Energy Test Study Guide

ReSound Unite TV FREQUENTLY ASKED QUESTIONS. Setup & Configuration. Use & Operation. Troubleshooting

General technical FAQs

INTRODUCTION TO READING AND LITERATURE SAMPLE TESTS

GOALS: The goal for this session is: OBJECTIVES: By the end of the lesson participants should be able to: MATERIALS: Instructor ACTVITIES: EVALUATION:

LIGHTSTICK KINETICS. INTRODUCTION: General background on rate, activation energy, absolute temperature, and graphing.

Great Fit Knifty Knit Mitts

Investigation M3: Separating Mixtures into Component Parts

Scientific Experiments Using the Inquiry Activity Pendulums

DETERMINING THE MASS OF A COPPER ATOM

2. Room temperature: C. Kelvin. 2. Room temperature:

GENERAL SCIENCE LABORATORY 1110L Lab Experiment 6: Ohm s Law

Internet basics 2.3 Protecting your computer

Alfa Romeo 147 On board instruments installation guide

Transcription:

How Do Mittens Keep You Warm? Computer 2 Do you have a favorite pair of mittens or gloves? Even if you do not live in a cold place, it is possible that you have been somewhere cold or will go to a cold place when you are older. When you wear mittens or gloves to keep you warm, where do you think the warmth comes from? In this experiment, you are going to find the source of the heat. OBJECTIVES In this activity, you will Find the temperature of the classroom and the temperature of your hand. Try to predict temperature changes that happen when the Go!Temp is placed in various locations. Test how warm mittens help your hands stay warm. MATERIALS computer with Logger Lite software installed Go!Temp temperature probe mitten KEY QUESTION Do mittens make heat or hold heat in? HYPOTHESIS Choose one of the following by checking the box in front of the statement that you think is right. 1. Mittens make their own heat. 2. Mittens hold heat in. Evaluation copy Why do you think so? Elementary Science with Vernier 2-1

Computer 2 PROCEDURE 1. Make sure the Go!Temp is connected to the computer. Put the Go!Temp on the desk and don t touch it until you are told to do so later on. 2. Start Logger Lite on your computer. 3. Open the file for this activity by doing the following: a. Click the Open button,. b. Open the folder called Elementary Science. c. Open the file called 02 Mittens. 4. Do the following to find the temperature of the classroom: a. Make sure the Go!Temp is lying on the desk and hasn t been touched by anyone. If it has been lying there for a few minutes, it will be the temperature of the room. b. Look at the digital meter on the screen and write down the temperature as the Room temperature in the Data Table, below. Data Table Room temperature C Prediction Temperature (maximum) Was your prediction high or low? Open hand C C Empty mitten C C Open hand in mitten C C 5. Make a prediction by following the steps below: a. Think about what will happen to the temperature on the screen if you hold the probe across the palm of your open hand during data collection. Think about your body temperature compared to the room temperature. b. Guess how high the temperature will be at the end of data collection and write down your prediction in the Data Table. 2-2 Elementary Science with Vernier

How Do Mittens Keep You Warm? 6. Now, collect data for the temperature of your open palm by doing the following: a. Make sure the temperature values in the digital meter on the screen are very close to the value you recorded as the room temperature in your Data Table in Step 4. b. Click. c. Place the tip of the metal part of the probe in the middle of your open palm, holding it by the black end with your other hand. Important: The tip of the sensor should be gently touching your palm. Don t close your fingers over the metal part. d. Hold the probe in the correct position during data collection. 7. Do the following to find the maximum temperature of your open palm: a. Look through the data table on the screen. b. Find the maximum (largest) temperature value for the Latest data. c. Record this value in the correct place on the Data Table. 8. Click the Store button,, to store your data. 9. After you have finished finding the temperature of your open palm, place the Go!Temp on your table and allow it to sit there without being touched until you are told to pick it up again later on. This way, the probe will cool down to the temperature of the room. 10. Repeat Steps 5-9, but this time put the whole metal part of the probe inside a mitten lying on the table (do not touch the probe with your hand). 11. Repeat Steps 5-8, but this time put your hand in the mitten and touch the tip of the Go!Temp to the middle of your palm while data are being collected. The Go!Temp should look like the drawing at the right. Elementary Science with Vernier 2-3

Computer 2 ANALYZE YOUR DATA 1. What is the source of heat in this experiment? 2. If the mitten does not produce heat on its own, then how do mittens keep your hands warm? 3. Thinking about the previous question, explain the difference between heat production and heat retention. Good job!! 2-4 Elementary Science with Vernier

Vernier Lab Safety Instructions Disclaimer THIS IS AN EVALUATION COPY OF THE VERNIER STUDENT LAB. This copy does not include: Safety information Essential instructor background information Directions for preparing solutions Important tips for successfully doing these labs The complete Elementary Science with Vernier lab manual includes 43 labs and essential teacher information. The full lab book is available for purchase at: http://www.vernier.com/cmat/ewv.html Vernier Software & Technology 13979 S.W. Millikan Way Beaverton, OR 97005-2886 Toll Free (888) 837-6437 (503) 277-2299 FAX (503) 277-2440 info@vernier.com www.vernier.com