Job Information Type: DHLE-LED Catalog #: Project: Comments: Prepared by: YEAR WARRANTY WARRANTY TEN INCLUDES LABOR ALLOWANCE Length: 8 Description DECO Lighting s DHLE-LED offers a high performance LED luminaire that is ideal in manufacturing, warehousing, commercial and gymnasium applications. Its bi-level capable wiring option offers a cost effective way to reduce your energy costs by using motion sensors or simple switching techniques while its dimming driver option allows for full output control. LM-80-tested LED populated custom strips provide ideal light distribution for mounting heights from - to 0-ft. The 0-,0- and 00- watt performance and value-optimized fixtures replace up 00-watt metal halide high bay fixtures. The fixture is constructed of sheet steel for heat sink and thermal control and a specular reflector for high performance. A top side access door provides easy serviceability by enabling unobstructed driver access. Ordering Information Example: (DHLE-LED-0-0-W-UNV-MS) DHLE-LED Series Wattage/Lumen Color Temp. Reflector Voltage Option 0 0 00 0 00 0W/, 0W/877, 00W/976, 0W/79, 00W/0 0 0 0 000K 00K 000K 000K M W Miro Reflector High Reflectance White UNV 0 77 0-77V 0V 77V CSC OM MS EM DM WG Control Scope Connected Occupancy Sensor (HBP-) Motion Sensor w/dimming (FSP-) Emergency Dimmable Wire Guard Delivered Lumens (000K) DLC Listed Wattages (Please see matrix on Page ) 06 Deco Lighting, www.getdeco.com T: (800) 6-DECO F: (0) 66-68 Rev Date: //6 #
Features High efficacy LED boards with dual copper cladding for thermal dissipation. Optional occupancy sensor, lensed door and wire guard available. Housing has top side access door for easy field access of driver and control gear. 00,000 hour rated life Photometric Data Operating temp: -0ºF to 0ºF DLC Listed (Please see matrix below) Occupancy Sensor (Information on page ) Motion Sensor (Information on page ) DLC Listing 0 0 0W 0W 00W 0W 000K 00K X X X X 000K X X X X 000K X X X X 0 0 0W 0fc 0.fc fc 0.fc 0% Max Cd fc Distance in units of mount height (0ft) 0W fc 0.fc 0.fc Distance in units of mount height (0ft) Lumen Chart Performance Data CRI: 70+ CCT: 000K, 00K, 000K, 000K Warranty: 0 yr. Limited Warranty Dimming: Available with 0-0V inputs dimming down to 0% Operating Temperature: - C to +9 C (-0 F to +0 F) L70 Rating: 00,000+ Hours IP Rating: IP0 Driver Current: 700mA Sound Rating: Class A (inaudible in a db ambient environment) BUG Rating: 0W B U0 G 0W B U G Lumen Chart Wattage 000K 000K 00K 000K 0 67 77 9 0 877 78 787 69 00 976 87 8 079 0 79 69 66 80 00 0 098 97 899 *Lumen outputs are based on the 000K performance data and then scaled down to the other temperatures. 06 Deco Lighting, www.getdeco.com T: (800) 6-DECO F: (0) 66-68 Rev Date: //6 #
Occupency Sensor The HBP- occupancy sensor is designed for automatic lighting control in high or low bay applications. It contain a passive infrared (PIR) sensor and a lens engineered to provide reliable coverage from a wide range of mounting heights. Sensitivity and time delay adjustments are set using trimpots conveniently located on the sensor module. The HBP- can also be adjusted remotely using a handheld configuration tool (FSIR-00). The HBP- includes a hold-off daylighting light level feature to prevent lighting from turning on when occupancy is detected when there is sufficient ambient light available. The HBP- includes extra features that can be enabled or disabled via the FSIR-00. Features include burn-in mode, walkthrough mode, visual alert and occupancy mode. Indoor use only Operating Temperature: F to 8 F (0ºC to 70ºC) Operating Humidity: % to 9%, non-condensing Line voltage for direct connection to load 0, 77, 7V, 60Hz or 0V, single phase 0Hz operation Power consumption: 0.W Adjustable hold-off daylighting level Flexible mounting option Snap-in mounting hardware UL and cul listed Easy mounting using knockout at end of flourescent high bay luminaire Weight 6.oz (8g) Adjustable time delay and sensitivity 06 Deco Lighting, www.getdeco.com T: (800) 6-DECO F: (0) 66-68 Rev Date: //6 #
Step Dimming & Bi-Level FSP- The FSP- mounts in an outdoor lighting fixture and provides multi-level control based on motion. The sensor also includes a photocell to measure the ambient light level. It controls 0-0 VDC LED drivers or dimming ballasts, as well as non-dimming ballasts and, with an SFP-LX Lens, in rated for wet and cold locations. All control parameters are adjustable via a wireless configuration tool capable of storing and transmitting sensor profiles. Key Factors Fully adjustable high and low dimmed light levels. Designed for LED fixtures; rated for extreme temperatures and up to 00,000 on/off cycles Hold off setpoint with automatic calibration option for convenience and added energy savings Adjustable via handheld wireless configuration tool IP66 rated with choice of lenses for wet and outdoor locations, and mounting heights from 8 to Adjustable time delay and cut off delay Coverage & Dimensions The FS-Lx lenses work with FSP- motion sensors to provide multi-level lighting control based on motion and the ambient light level. Four lens choices provide flexibility for varying mounting heights. FSP-L. 9.mm FSP-L 7. 8.mm 60 ft 6 6 6 8' ' ' ' ' 7' 7' ' ' 0 ' 60º lens, maximum coverage 8 diameter from 8 height 0.78 9.7mm 6 6 7 7 6 6 7 60º lens, maximum coverage 6 diameter from height 0.9.6mm FSP-L FSP-L7. 8.mm. 9.mm ' 0 7' ' 8 9 6 6 9 8 60º lens, maximum coverage diameter from height 0.78 9.7mm ' ' 0 0 ' ' 60º lens, maximum coverage 0 diameter from height.0 6.mm 06 Deco Lighting, www.getdeco.com T: (800) 6-DECO F: (0) 66-68 Rev Date: //6 #
MacAdam Ellipse A MacAdam ellipse is a region on a chromaticity diagram which contains all colors which are indistinguishable, to the average human eye, from the color at the center of the ellipse. This measure helps to establish the variability in color a light source can exhibit before a general observer will notice the shift in color. Each standard deviation out from the target center is referred to as a MacAdam step, with ANSI recommending that lamp manufacturers stay within a -step ellipse. This -step MacAdam minimum requirement means that lamp manufacturers are given a great deal of allowance regarding the perceptible differences in color properties of their fixtures versus what they advertise. Deco Lighting uses only the finest LEDs made by Nichia, the world s largest LED manufacturer. The Nichia LED is considered the Rolls Royce of LEDs. Featuring a -step MacAdam ellipse, the tightest binning in the industry, Nichia LEDs are held to a higher standard than minimum industry requirement and don t color-shift like fixtures utilizing lower quality LEDs. sw7f sw0f swf sw0f swf x y x y x y x y x y 0.78 0.999 0. 0.9 0.989 0.89 0.76 0.687 0.6 0.76 0.76 0.8 0. 0.0 0.0 0.97 0.78 0.86 0.8 0.706 0.698 0. 0. 0.6 0. 0.0 0.909 0.906 0.67 0.769 0.9 0.0 0.6 0.96 0.6 0.87 0.86 0.77 0.66 0.67 06 Deco Lighting, www.getdeco.com T: (800) 6-DECO F: (0) 66-68 Rev Date: //6 #