Welcome to CompX Timberline What are we all about? Locks for Wood Furniture and Cabinets We can lock desks, credenzas, files, store fixtures, lockers, and cabinets of all types. Wide Selection We make cam locks, deadbolt locks, gang locks, central locking systems, push locks, and many special locks. File Frame System for Hanging Files Completely engineered, attractive system which maximizes filing capabilities. High Quality & Great Service All locks are made from the finest materials at our plant in Lake Bluff, IL Our customer service is the best! Next Day Shipment Most orders can ship one business day after order is received. No Minimums Whether you need 1 lock or 10,000, we want to be your lock supplier! Want Samples? Need Help? Don t See What You Need? Call Us Today 1-800-LOCKBAR 2
LOCKING SYSTEMS FOR WOOD FURNITURE Front Gang Locks Page 6 Side Gang Locks Page 8 Central Locks For Desks and Credenzas Page 10 Lateral File Locks and Anti-Tip Interlock Page 12 Cam Locks and Deadbolt Locks Page 18 Glass Door Locks Page 24 Strike Plates and Other Accessories Page 28 File Frame System Page 29 Lock Finishes: Lock Features: Polished Nickel LP-100 Old English LP-200 Black LP-300 Statuary Bronze LP-400 Polished Brass LP-500 Satin Nickel LP-700 Small Diameter High Quality/Long Life Solid Brass Keys Numbered on Face & Keys Over 500 Changes Master-Keyed Removable Lock Plug 3
TIMBERLINE REMOVABLE LOCK PLUG SYSTEM Complete Keying Versatility In Plant furniture can be keyed easily to the customer s requirements at any time. In Field key numbers can be readily changed by your customer. Ease of Finishing Furniture may be finished without lock plug installed, eliminating need for masking. Simplified Inventory Management One stock of lock plugs fulfills all locking requirements. ANY LOCK PLUG SNAPS INTO ANY Lock Plug + Cylinder Body = Assembled Lock WHEN ASSEMBLED, MOST TIMBERLINE LOCKS ARE DESIGNED FOR MOUNTING IN 3/4" PANELS... WITH OR WITHOUT A VENEER OR LAMINATE FACE 3/4" CORE VENEER OR LAMINATE A change tool (P/N KY-500) is required to remove plugs. A firm clockwise turn removes the plug. ALL TIMBERLINE LOCKS MOUNT EASILY WITH #6 SCREWS 4
ADJUSTABLE PIN INSTALLATION LR-100 Lockbar Retainer holds the lockbar in its groove when drawer slides alone are not sufficient. UNLOCKED LOCKED TL-100 Adjustable Pin Tool Rotates Cylinder Bodies Installs Adjustable Pins AP-037 3/8" Adjustable Pins may be easily installed or moved to any position along the length of the lockbar. Adjustable pins are also available in the following longer lengths: 1/2", 5/8", 3/4", 7/8", 1", 1 1 /4", 11/2", 13/4", and 2". DRAWER LOCKING DC-500 Drawer Locking Clips provide the preferred method of locking drawers. When used with the AP-037 3/8" Adjustable Pin, a strong, rigid lock is provided that fits easily within the standard 1/2" drawer slide clearance. LOCKBAR UP X DRAWER WILL NOT OPEN LOCKBAR DOWN DRAWER OPENS LOCKED POSITION UNLOCKED POSITION 5
SYSTEM 101 FRONT MOUNTED GANG LOCK FOR MULTIPLE DRAWERS - LOCK MOUNTED IN DRAWER FRONT - MINIMIZES INTERFERENCE WITH HANGING FILES LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel CB-101 TYPE 101 CYLINDER BODY LC-106 TYPE 106 LOCKBAR CLIP LOCK BAR MUST BE RESTRAINED FROM DROPPING WHEN IN OPEN POSITION LB-240 LOCKBAR 24" STANDARD OR CUT TO SIZE AP-037 3/8" ADJUSTABLE PIN TYPICAL INSTALLATION DETAILS 11 16" MIN - FULL 1/2" LOCKBAR THROW - FITS WITHIN 1/2" DRAWER SLIDE CLEARANCE 5 32" MIN 1 2" 1" MIN LR-100 LOCKBAR RETAINER - MINIMAL MACHINING REQUIRED: - HOLE FOR LOCK - GROOVE FOR LOCKBAR 1 1 8" 16.5 MM DIA HOLE DC-500 DRAWER LOCKING CLIP 6
SYSTEM 100 - LOCK MOUNTED IN FIXED RAIL CB-100 TYPE 100 CYLINDER BODY LC-100 TYPE 100 LOCKBAR CLIP TYPICAL INSTALLATION DETAILS 11 16" MIN 5 32" MIN 1 2" 1" MIN 1 5 8" 16.5 MM DIA HOLE SYSTEM 104 - LOCKBAR LOCATED FURTHER BACK IN CASE CB-101 TYPE 101 CYLINDER BODY EXTENDED LOCKBAR CLIP LC-104 (RIGHT HAND) LC-114 (LEFT HAND) TYPICAL INSTALLATION DETAILS 11 16" MIN 5 32" MIN 2 1 2" 1 2" 1" MIN LOCK BAR MUST BE RESTRAINED FROM DROPPING WHEN IN OPEN POSITION 1 1 8" 16.5 MM DIA HOLE 7
SYSTEM 270 SIDE MOUNTED GANG LOCK FOR TWO DRAWERS LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel TYPICAL INSTALLATION DETAILS CB-270 TYPE 270 13 / 16" 1 2 3 / 4" - FULL 1/2" THROW - FITS WITHIN 1/2" DRAWER SLIDE CLEARANCE - LOCK HOLE ONLY MACHINING REQUIRED 16.5 MM DIA HOLE 3 / 8" 1 2 3 / 4" DRAWER FRONTS DC-500 DRAWER LOCKING CLIP 8
SYSTEM 150 SIDE MOUNTED GANG LOCK FOR MULTIPLE DRAWERS LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel CB-150 TYPE 150 CYLINDER BODY LC-150 TYPE 150 LOCKBAR CLIP LB-240 LOCKBAR 24" STANDARD OR CUT TO SIZE TYPICAL INSTALLATION DETAILS AP-037 3/8" ADJUSTABLE PIN 11 16" MIN - FULL 1/2" LOCKBAR THROW - FITS WITHIN 1/2" DRAWER SLIDE CLEARANCE 5 32" MIN 1 2" LR-100 LOCKBAR RETAINER - MINIMAL MACHINING REQUIRED: - HOLE FOR LOCK - GROOVE FOR LOCKBAR 16.5 MM DIA HOLE DC-500 DRAWER LOCKING CLIP 9
CENTRAL LOCKING SYSTEM 500 A COMPLETE SYSTEM FOR CENTRAL LOCKING BOTH DESKS AND CREDENZAS TYPICAL INSTALLATION X" DISTANCE BETWEEN ACTUATOR MOUNTING SURFACES FS-362 FLEXIBLE SHAFT SC-100 SHAFT CLIP X" CB-550 AC-500 ACTUATOR 1" MIN UP TO FOUR PEDESTALS AND A CENTER DRAWER CAN BE LOCKED USING ONE LOCK MOUNTED ON A FRONT EXPOSED RAIL 10
SPECIAL SHAFTS ARE AVAILABLE FOR LOCKING SINGLE SIDED UNITS AND SECRETARIAL RETURNS SPECIAL CYLINDER BODIES ARE AVAILABLE WITH DEADBOLTS FOR LOCKING DOUBLE DOORS OR SPECIAL DRAWER CONFIGURATIONS LB-240 LOCKBAR 24" STANDARD OR CUT TO SIZE LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel CB-550 SP-250 STRIKE PLATE AP-037 3/8" ADJUSTABLE PIN FS-362 FLEXIBLE SHAFT (LENGTH MUST BE SPECIFIED... TYPICALLY X"-1/4") SC-100 SHAFT CLIP AC-500 ACTUATOR LR-100 LOCKBAR RETAINER DC-500 DRAWER LOCKING CLIP 11
ANTI-TIP INTERLOCK SYSTEM 350 (NO LOCK) SN-300 SNAPPER (STIFF ACTION) LB-240 LOCKBAR 24" STANDARD OR CUT TO SIZE AP-037 3/8" ADJUSTABLE PIN LR-100 LOCKBAR RETAINER WD-21A ANTI-TIP WEDGE TYPE A WEDGE LOCK MUST BE USED DURING PRODUCT SHIPMENT TO HOLD LOCKBAR IN PROPER POSITION WD-100 WEDGE LOCK WD-21B ANTI-TIP WEDGE TYPE B 12
ANTI-TIP INTERLOCK FUNCTION WHEN ANY DRAWER IS PULLED OPEN, THE WEDGES ON THAT DRAWER MOVE THE LOCKBAR INTO A LOCKED POSITION... THEREBY PREVENTING ANY FURTHER DRAWERS FROM BEING OPENED PROPER WEDGE CONFIGURATION TL-200 WEDGE/PIN MARKING TOOL REQUIRED FOR PROPER INSTALLATION A A B A B B B A ACCURATELY MARKS PIN POSITION FOR PROPER WEDGE ACTION WHEN WEDGES ARE INSTALLED IN THE PROPER POSITIONS AS SHOWN ABOVE, ONLY ONE DRAWER MAY EVER BE OPEN AT ANY ONE TIME... EVEN IF TWO DRAWERS ARE PULLED AT EXACTLY THE SAME TIME! 13
LATERAL FILE LOCK/INTERLOCK SYSTEM 300 LOCKS WIDE DRAWERS ON BOTH SIDES AND PROVIDES ANTI-TIP INTERLOCK FS-362 FLEXIBLE SHAFT (LENGTH MUST BE SPECIFIED... TYPICALLY X"-5/8") LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel AP-037 3/8" ADJUSTABLE PIN CB-500 SC-100 SHAFT CLIP WD-21A ANTI-TIP WEDGE TYPE A LB-240 LOCKBAR 24" STANDARD OR CUT TO SIZE LR-100 LOCKBAR RETAINER AC-200 ACTUATOR WD-21B ANTI-TIP WEDGE TYPE B 14
LATERAL FILE AP-037 3/8" ADJUSTABLE PIN AC-200 ACTUATOR 1" MIN X" CB-500 X" INSIDE DIMENSION OF CASE SC-100 SHAFT CLIP FS-362 FLEXIBLE SHAFT WD-21A ANTI-TIP WEDGE TYPE A LB-240 LOCKBAR 1/16" MINIMUM CLEARANCE BETWEEN WEDGE AND PIN WD-21B ANTI-TIP WEDGE TYPE B - MOUNTS IN 1" EXPOSED RAIL - ANTI-TIP INTERLOCK HELPS PREVENT ACCIDENTAL TIPPING OF FILE UNIT - SEE INSTALLATION DETAILS ON PAGE 13 15
ANTI-TIP INTERLOCK SYSTEM 400 2-DRAWER LATERAL (NO LOCK) WHEN EITHER DRAWER IS PULLED OPEN, THE DRAWER CLIP ON THAT DRAWER MOVES THE SNAPPER INTO A LOCKED POSITION... THEREBY PREVENTING ANY FURTHER DRAWERS FROM BEING OPENED TYPICAL INSTALLATION DETAILS 7 5 8" MINIMUM DISTANCE BETWEEN DRAWER SLIDES 2 15 16" 1 3 8" 1 16" 2 15 16" 1 3 8" 1 16" - PREVENTS MORE THAN ONE DRAWER FROM BEING OPENED AT A TIME - MEETS BIFMA STANDARDS FOR STRENGTH AND DURABILITY DC-400 DRAWER CLIP - ALL COMPONENTS ARE SURFACE MOUNTED - WIDE TOLERANCE ACCOMMODATION - EASY TO MOUNT AND LOW COST - 1/2" DRAWER SLIDE CLEARANCE REQUIRED SN-400 ANTI-TIP SNAPPER 16
ANTI-TIP INTERLOCK SYSTEM 400 3 OR 4-DRAWER LATERAL (NO LOCK) DC-410 NARROW DRAWER CLIP FOR USE WHEN LESS SPACE IS ALLOWABLE BETWEEN DRAWER SLIDES DC-410 NARROW DRAWER CLIP TYPICAL INSTALLATION DETAILS 6 1 8" MINIMUM DISTANCE BETWEEN DRAWER SLIDES 2 13 16" 2 13 16" 1 3 8" 1 3 8" 1 3 16" 1 3 16" 11 16" 1 3 4" LINKAGE COMPONENTS 11 16" SN-410 LINKAGE ARM LENGTH OF LOCKBAR = X + 1" DISTANCE BETWEEN PINS ON LOCKBAR = X - 1" X = DISTANCE BETWEEN SNAPPERS FP-32A LOCKBAR FIXED PIN (SEE DRAWING FOR SIZING INSTRUCTIONS) 17
DEADBOLT LOCKS HORIZONTAL MOUNT 3 32" 1 2" THROW - TWO STYLES AVAILABLE - REQUIRES 16.5 MM DIAMETER HOLE - ATTRACTIVE TOUGH NYLON HOUSING - MOUNTS IN 3/4" MATERIAL CB-230 TYPE 230 CB-231 TYPE 231 5 16" 3 32" 15 16" 1 13 16" 1 2" THROW 1 3 8" LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel SP-250 STRIKE PLATE 3 32" 1 2" THROW 2 5 8" 9 32" 3 8" THROW 13 16" CB-232 TYPE 232 CB-280 TYPE 280 15 32" 19 32" 1 2" THROW CB-234 TYPE 234 1 1 2" 3 8" THROW 7 8" 1 2" THROW CB-235 TYPE 235 1 1 2" CB-281 TYPE 281 18
DEADBOLT LOCKS VERTICAL MOUNT - TWO STYLES AVAILABLE - REQUIRES 16.5 MM DIAMETER HOLE - ATTRACTIVE TOUGH NYLON HOUSING - MOUNTS IN 3/4" MATERIAL CB-240 TYPE 240 THROW 1 2" 3 32" 1 13 16" 15 16" 5 16" THROW 3 8" 13 16" 15 32" CB-241 TYPE 241 THROW 1 2" 3 32" 1 3 8" CB-290 TYPE 290 9 32" THROW 3 8" CB-242 TYPE 242 THROW 1 2" 2 5 8" SP-250 STRIKE PLATE 3 32" THROW 1 2" 1 1 2" CB-291 TYPE 291 CB-244 TYPE 244 19 32" CB-245 TYPE 245 THROW 1 2" 1 1 2" 7 8" LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel 19
CAM LOCKS HORIZONTAL MOUNT - AVAILABLE WITH EITHER 90 OR 180 ROTATION - REQUIRES 16.5 MM DIAMETER HOLE - MOUNTS IN 3/4" MATERIAL CAMS CHANGE EASILY! 180 ROTATION 90 ROTATION 3 32" 13 16" CB-080 TYPE 080 21 32" 9 16" CB-180 TYPE 180 3 32" CB-083 TYPE 083 CB-084 TYPE 084 9 32" CB-183 TYPE 183 CB-184 TYPE 184 LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel CB-087 TYPE 087 9 32" 1 23 32" CB-187 TYPE 187 NOTE: CAM LOCKS MUST BE INSTALLED SO THAT THEY LOCK IN THE COUNTER- CLOCKWISE POSITION! CB-085 TYPE 085 15 32" 13 16" CB-185 TYPE 185 15 32" CB-088 TYPE 088 CB-188 TYPE 188 7 8" CB-089 TYPE 089 CB-189 TYPE 189 20
CAM LOCKS VERTICAL MOUNT CAMS CHANGE EASILY! - AVAILABLE WITH EITHER 90 OR 180 ROTATION - REQUIRES 16.5 MM DIAMETER HOLE - MOUNTS IN 3/4" MATERIAL 180 ROTATION 90 ROTATION 3 32" CB-090 TYPE 090 21 32" 9 16" 13 16" CB-190 TYPE 190 3 32" CB-093 TYPE 093 CB-094 TYPE 094 9 32" CB-193 TYPE 193 CB-194 TYPE 194 LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel CB-097 TYPE 097 9 32" 1 23 32" CB-197 TYPE 197 NOTE: CAM LOCKS MUST BE INSTALLED SO THAT THEY LOCK IN THE COUNTER- CLOCKWISE POSITION! CB-095 TYPE 095 15 32" 13 16" CB-195 TYPE 195 CB-098 TYPE 098 15 32" CB-198 TYPE 198 CB-099 TYPE 099 7 8" CB-199 TYPE 199 21
DOUBLE DOOR LOCK TYPE 250 3 32" 3 16" CB-250 TYPE 250 - REQUIRES 16.5 MM DIAMETER HOLE SP-100 STRIKE PLATE 3 32" 11 16" 1 13 32" 1 2" THROW 1 13 32" 1 2" THROW 1 13 32" SP-257 STRIKE PLATE 1 2" THROW 1 2" THROW 2 1 32" 1 13 16" SQ - ALL LOCKS SHOWN IN LOCKED POSITION LOCKS BOTH DOORS WITHOUT THE USE OF A SPRING CATCH 1 13 16" SQ TYPE 250 DOUBLE DOOR LOCK TYPE 251 DOUBLE DOOR LOCK WITH 11/16" OFFSET LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel TYPE 255 OPPOSITE MOUNT DOUBLE DOOR LOCK TYPE 256 OPPOSITE MOUNT DOUBLE DOOR LOCK WITH 11/16" OFFSET 22
PUSH LOCK TYPE 175 SLIDING DOOR LOCKED X CB-175 TYPE 175 CYLINDER BODY Locked 13 32" SLIDING DOOR OPEN - LOCKS SLIDING DOORS - REQUIRES 3/4" DIAMETER HOLE Open 3 32" BZ-110 FINISH CUP - OPTIONAL FINISH CUP FOR BACK DOOR - REQUIRES 1/2" HOLE - NICKEL FINISH LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel THICK PANEL LOCK TYPE 170 MOUNTING FLANGE ADJUSTS TO ALLOW LOCK TO BE MOUNTED IN PANELS FROM 7/8" THICK UP TO 1 3/8" THICK 7/8" CB-170 TYPE 170 - REQUIRES 16.5 MM DIAMETER HOLE - 90 ROTATION ONLY 1" 1 1 /8" THE THICK PANEL LOCK COMES PACKAGED WITH 2 DIFFERENT CAMS WHICH CAN BE ASSEMBLED TO THE LOCK IN ANY OF THE 3 ORIENTATIONS ILLUSTRATED TO THE RIGHT. THIS OFFERS SUFFICIENT FLEXIBILITY TO ADAPT TO MOST LOCKING SITUATIONS. 1 1 /2" 1 1 /2" Cam Assembly Nut 1 1 /8" 7/8" 1" 1 1 /4" Depth Marks 1 1 /4" 1 1 /4" 23
GLASS DOOR LOCK BORE THROUGH STYLE TYPE 300 SERIES HORIZONTAL MOUNT - FOR SWING STYLE DOORS - MOUNTS IN GLASS DOORS UP TO 3/8" THICK TYPE 310 SERIES VERTICAL MOUNT 3 16" 1 1 4" 15 16" CAM MUST ROTATE COUNTERCLOCKWISE TO LOCK FINISH CAP IS ATTACHED TO GIVE FINISHED APPEARANCE 1 1 4" 15 16" 3 16" 1 5 8" 1 3 16" 7/8" DIAMETER HOLE BORED IN GLASS CENTERED 7/8" FROM EDGE NUT WASHER IS HAND TIGHTENED TO FASTEN CYLINDER BODY TO GLASS 1 3 16" 1 5 8" HORIZONTAL MOUNT CB-301 NICKEL FINISH VERTICAL MOUNT CB-311 NICKEL FINISH CB-305 BRASS FINISH LOCK PLUGS LP-100 Nickel LP-500 Brass LP-700 Satin Nickel CB-315 BRASS FINISH CB-307 SATIN NICKEL FINISH CB-317 SATIN NICKEL FINISH 24
GLASS DOOR LOCK COMPRESSION MOUNT STYLE TYPE 350 SERIES HORIZONTAL MOUNT - NON-BORE GLASS DOOR LOCKS - FULLY CUSHIONED TO AVOID GLASS DAMAGE - MOUNTS ON GLASS DOORS 1/4" TO 5/16" THICK TYPE 360 SERIES VERTICAL MOUNT 7 16" 5 16" 1 1 8" 7 16" 5 16" 1 1 8" 1 5 8" LOCK SLIPS ONTO EDGE OF GLASS DOOR AT ANY LOCATION 1 3 16" 1 3 16" NO BORING REQUIRED 1 5 8" Ø 7 8" 1 2" 1 2" Ø 7 8" HORIZONTAL MOUNT CB-351 NICKEL FINISH VERTICAL MOUNT CB-361 NICKEL FINISH CB-355 BRASS FINISH LOCK PLUGS LP-100 Nickel LP-500 Brass LP-700 Satin Nickel CB-365 BRASS FINISH CB-357 SATIN NICKEL FINISH CB-367 SATIN NICKEL FINISH 25
GLASS DOOR LOCK DOUBLE DOOR STYLE Ø 7 8" 1 3 16" 1 1 8" 7 16" 5 16" TYPE 370 SERIES VERTICAL COMPRESSION MOUNT TAB PROVIDES STOP FOR OPPOSING DOOR LOCK SLIPS ONTO EDGE OF GLASS DOOR AT ANY LOCATION NO BORING REQUIIRED 1 2" 7 16" 1 2" 1 5 8" SET SCREW TIGHTENS LOCK TO GLASS DOOR THREADED BARREL CAM LOCK KIT CB-141 Nickel Plated Cylinder CB-143 Black Plated Cylinder (shown) Application Universal type lock for either doors or drawers. Kit will accommodate most locking applications for material thickness 1/16" 1/2". Operation 90 degree cam rotation. Counter clockwise to lock. Keying Order lock plugs separately. Packaging Contents Cylinder supplied with one straight cam, two bent cams, flange nut, hex nut and spur washer. Cam plates are zinc plated. CAM IN LOCKED POSITION 1 1 4" CB-371 NICKEL FINISH 13 16" 1 23 32" CB-375 BRASS FINISH CB-377 SATIN NICKEL FINISH LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel FLIPPER/TAMBOUR DOOR LOCK TYPE 181 - REQUIRES 16.5 MM DIAMETER HOLE CB-181 TYPE 181 CYLINDER BODY HORIZONTAL MOUNT 23 32" CB-191 TYPE 191 CYLINDER BODY VERTICAL MOUNT 29 32" 13 32" SP-181 STRIKE PLATE 26
SYSTEM 260 WARDROBE LOCK LOCK PLUGS LP-100 Nickel LP-200 Old English LP-300 Black LP-400 Statuary Bronze LP-500 Brass LP-700 Satin Nickel SP-260 LOCKBAR SUPPORT SP-101 STRIKE PLATE WB-480 LOCKBAR 48" LONG USER CUT TO SIZE (24" & 36" LENGTHS ALSO AVAILABLE) CB-260 TYPE 260 (VERTICAL MOUNT) 1" MIN. - FULL 1/2" LOCKBAR THROW - 16.5 MM LOCK HOLE ONLY MACHINING REQUIRED DOOR EDGE FOR HORIZONTAL MOUNTING USE CB-265 TYPE 265 27
STRIKE PLATES AND ACCESSORIES - ALL STRIKE PLATES ARE BLACK IN COLOR DC-500 19 32" SP-185 7 16" 1 15 16" SP-181 7 16" 1 15 16" 3 16" 7 16" SP-250 5 16" SP-100 7 16" 21 32" 1 3 4" 3 4" 7 8" DC-510 3 8" 7 16" 13 16" SP-251 SP-101 1 2" 1 3 4" 3 4" 7 8" 1 4" 3 16" 1 2" 1 4" 3 8" 3 8" 3 8" 7 8" SP-255 SP-256 SP-257 7 8" 7 8" 7 8" SP-258 USED TO INSTALL ADJUSTABLE PINS AND ROTATE CYLINDER BODIES KY-500 CHANGE TOOL REQUIRED TO REMOVE LOCK PLUGS IN CYLINDER BODIES TL-100 ADJUSTABLE PIN INSTALLATION TOOL ALLOWS CYLINDER BODIES TO BE USED WITH 3/4" THROUGH 7/8" DIAMETER HOLES AND PERMITS USE OF LOCKS IN 7/8" THICK PANELS BZ-100 - Bezel Nickel BZ-200 - Bezel Old English BZ-300 - Bezel Black BZ-400 - Bezel Statuary Bronze BZ-500 - Bezel Brass BZ-700 - Bezel Satin Nickel 10 MM SHANK DIAMETER DRILLS THE PROPER DIAMETER HOLE FOR MOST CYLINDER BODIES DB-165 16.5MM DRILL BIT COVERS CYLINDER BODY DURING FINISHING BEFORE LOCK PLUGS ARE INSTALLED CC-100 CYLINDER FINISH CAP ALLOWS CAM LOCK CYLINDER BODIES TO BE USED IN 5/8" THICK PANELS SP-300 SPACER FOR 5/8" PANEL 4.000 " 3.411 " SP-500 STRIKE PLATE 2.800 " SCREWS TO CASE SIDE. USE WHEN NO STRINGER AVAILABLE. 28
FILE FRAME SYSTEMS TYPICAL CONFIGURATIONS DESK FILE DRAWERS FILE DRAWER WIDE FILE DRAWER DEEP FILE DRAWERS WIDE FILE DRAWER x 2 LATERAL FILE DRAWERS LATERAL FILE DRAWER x 2 LATERAL FILE DRAWER WITH SIDE TO SIDE FILING x 2 x 2 FILING ACCOMMODATIONS LETTER FILE LEGAL FILE SIDE TO SIDE FILES FRONT TO BACK FILES FILING ACCOMODATIONS BASED ON TYPICAL DRAWER SIZE ACTUAL FILING CAPABILITIES WILL VARY 29
FILE FRAME SYSTEMS SPECIAL APPLICATIONS METAL DRAWER SYSTEMS LETTER WIDTH FILES LEGAL WIDTH FILES PLAIN DRAWER SYSTEMS CUT TO SIZE KITS FITS DRAWERS WITH INSIDE DEPTH LESS THAN 23" KITS SUPPLIED WITH THE COMPONENTS NEEDED TO OFFER FRONT TO BACK AND SIDE TO SIDE FILING x 2 FF-SK2 FOR LETTER WIDTH FILES FF-SK3 FOR LEGAL WIDTH FILES x 2 x 2 TWO KITS CAN BE COMBINED TO PROVIDE FILING IN LATERAL FILE DRAWERS FILING ACCOMMODATIONS LETTER FILE LEGAL FILE SIDE TO SIDE FILES FRONT TO BACK FILES FILING ACCOMODATIONS BASED ON TYPICAL DRAWER SIZE ACTUAL FILING CAPABILITIES WILL VARY 30
FILE FRAME SYSTEM ADVANTAGES Great Appearance... Functional Design Typical file frame corner Attractive, black material Files slide smoothly Will not slide out of position when using files Will not pull out when removing files Easy to adjust between filing configurations Rails snap in and out of position without tools Proven Design and Durability Easily supports twice the fully loaded weight of paper Weight is supported by the top of the drawer, not screws Withstands 50,000 back and forth cycles without paint wear or other degradation Proven durable during load testing Cost Effective, Easy to Install, and Reliability of Supply Fits easily into place and slides smoothly to desired lock-in filing configuration Easy to install using only screws No machining required No need to tape frame system in place during shipping Easy to purchase directly from manufacturer One week typical lead time File frame generally ships within one week FILE FRAME FACTS 1 1 4" LETTER FILES 12 1 8" to 12 3 16" LEGAL FILES 15 1 8" to 15 3 16" RECOMMENDED MINIMUM FILE TAB CLEARANCE 3 4" PROFILE HEIGHT 3 4" 8 3 4" RECOMMENDED INSIDE DRAWER HEIGHT 8 3 4" FOUR SIDED DRAWER THREE SIDED DRAWER 11 13 16" to 13 3 16" FILE FRAME SYSTEM CAN PROVIDE PERFECT LETTER FILING WITHIN THESE DIMENSIONS 14 13 16" to 16 3 16" FILE FRAME SYSTEM CAN PROVIDE PERFECT LEGAL FILING WITHIN THESE DIMENSIONS 31
915 Sherwood Drive Lake Bluff, IL 60044 1-800-LOCKBAR PH: 1-847-234-1864 FAX: 1-847-234-7922 www.compxnet.com The products contained in this catalog are protected by the following patents: 5,678,437; 4,609,233; 4,761,978; 4,838,624; 4,925,257; 4,914,932; 1,331,036; 6,109,708; 6,550,874. 2004 CompX Timberline Catalog #0704