TUTORS Rack & Pinion Rotary ctuators Single, ouble, and Integral ir/oil Tandem Rack & Pinion Mini Rotary ctuators (ø1/2" & /4" ores) Single Rack and Pinion Mini Rotary ctuators are very compact. Rotation angles 45, 90, and 180 standard. Nitrile Noise ampening umpers optional. Viton Seals optional for higher temperatures. Optional Low Friction Seals. ody Mount or optional ngle racket, Front and Rear Flange Mountings. Technical data Medium: Filtered compressed air to 150 PSI (10 ar) Operating Temperature: -20 F to 200 F (-29 to 9 ) with Standard Nitrile Seals -20 F to 400 F (-29 to 204 ) with Viton Seals -20 F to 250 F (-29 to 121 ) with Low Friction Seals Operating Pressure: 150 PSI (10 ar) ngle of Rotation: 45, 90, 180 Standard Other rotations available Rotational Tolerance: -0 + 1/2 acklash etween Rack & Pinion: 2 position units less than 1 of arc maximum NOT: For 0 backlash at each end of rotation, specify a double rack actuator with rotation adjustments. Lubrication: None required Norgren Rotary ctuators are rated for no lube added service. ll internal components are lubricated at the time of assembly with a Teflon based grease. Recommended fluid for air/oil tandem is petroleum based hydraulic oil, non-foaming, non-detergent ISO Viscosity grade of 46. Materials nd aps: lack anodized 6061-T6 aluminum ody: 6061-T6 aluminum alloy, entirely black anodized ear Rack: round and polished stress proof steel Pinion ear and Output Shaft: Manufactured as one piece from high strength steel. Shaft earings: S 841 ronze Standard Seals: Nitrile Ordering information Model codes ore 1/2" 0 /4" 1 Rack/Rotary Type Single Rack Standard Seals 0 Single Rack Low Friction Seals 1 ouble Rack Low Friction Seals 2 ouble Rack Standard Seals 5 ouble Rack Integral /O 7 Tandem Standard Seals (ø /4" ore only in mini rotary) Multiple Position ctuator 2 Position O Rotation 45 90 180 Output Shaft Single nd Keyway Standard ouble nd Keyway Mounting Standard 1 Front Flange 2 Rear Flange ngle racket 5 1 7 0-2 - 5 0 V 1 2 4 5 6 7 8 9 10 11 12 1 Options No Option 0 lectroless Nickel Viton Seals V (Specify) Switches N/ 0 Rotation djustments No djustment 1 nd ap 2 nd ap nd aps & 4 nd aps & 5 umper No umpers nd ap nd ap ll aps Flow ontrols N/ ushions N/ Port & Location Port Position 1 * Port Position 2 Port Position Port Position 4 Port Position 5 F *Standard Port Location MPL: Mini Rotary ctuator /4" ore ouble Rack Integral ir/oil Tandem Mini Rotary ctuator 2 Position 180 Rotation ouble nd Keyway Output Shaft Front Flange Mounting Port Position 2 No umpers Rotation djustment nd aps & Viton Seals. T-74
2 ear Rack and Piston: One-piece construction, ground and polished, stress-proof steel. Rack & Pinion Rotary ctuators Single, ouble, and Integral ir/oil Tandem Rack & Pinion Mini Rotary ctuators (ø1/2" & /4" ores) Mini Rotary ctuators are constructed with the finest materials for each component! 1 Seals: Lip type, pressure sensitive nitrile ctuator ody: Precision machined from seals are wear compensating for long 6061-T6, 40,000 PSI minimum service life and minimum friction. yield aluminum alloy for strength. The entire body is then black anodized for maximum wear and corrosion resistance. 1 2 TUTORS ouble Rack Shown 6 Seal Kits 45 90 180 rotations are standard and available in single or double rack models. Standard Low Friction Viton ir/oil Tandem ore Part No. Part No. Part No. Part No. 1/2"" Single Rack 000SK 000TK 000VK We recommend that 1/2"" ouble Rack 050SK 050TK 050VK ir/oil Tandems are /4" Single Rack 100SK 100TK 100VK returned to the factory /4" ouble Rack 150SK 150TK 150VK for repair. Torque Output Theoretical Torque Output in Inch-pounds (Newton-meters) 6 NOT: educt 10% from torque output for frictional loss. ø/4" ir/oil Tandem has the torque output of a Single Rack unit: deduct 20% for frictional loss. 4 5 4 Shaft earings: S 841 oil impregnated bronze bearings provide excellent wear and low friction characteristics. 5 Pinion ear and Keyed Output Shaft: Manufactured from high strength steel and precision machined as one piece. The gear/shaft can be easily removed and reinserted to satisfy a variety of keyway orientation requirements. 6 nd aps: Machined from 6061-T6 solid aluminum bar that is anodized for corrosion resistance. PSI (bar) Inch (Newtonpounds meters ore Size Series 40(2.8) 60(4.1) 80(5.5) 90(6.2) 100(6.9) 125(8.6) 150 (10.) per PSI per ar) 1/2" Single Rack 000 2.0 (.2) 2.9 (.).9 (.44) 4.4 (.50) 4.9 (.50) 6.1 (.69) 7.4 (.84).049 (.080) 1/2" ouble Rack 050 4.0 (.45) 5.8 (.66) 7.8 (.88) 8.8 (1.00) 9.8 (1.11) 12.2 (1.8) 14.8 (1.67).098 (.160) /4" Single Rack 100 6.6 (.75) 9.9 (1.12) 1. (1.50) 14.9 (1.68) 16.5 (1.86) 20.7 (2.) 24.8 (2.80).165 (.270) /4" ouble Rack 150 1.2 (1.49) 19.8 (2.24) 26.6 (.0) 29.8 (.7).0 (.7) 41.4 (4.68) 49.6 (5.60).0 (.540) T-75
TUTORS asic imensions Single Rack and Pinion Mini Rotary ctuator P ap 1.00 (25.40) 2.00 (50.80).125 x.06 eep (.17 x 1.52) ap.88 (22.5) 2 5 4 H 1/4-28 Tapped Thru lso ounterbore on oth Sides for #10 Socket Optional ouble Head ap Screw nd Output Shaft for Mounting ore H øk P 1/2".50 (89) 1.06 (27) 1.00 (25) 1.50 (8).59 (15).75 (9.5) 10-2 /4" 4.88 (124) 1.25 (2) 1.25 (2) 2.00 (51).69 (18).500 (12.70) 1/8 NPT 1 P ap / 1.00 (25.40) 2.00 (50.80).125 x.06 eep (.17 x 1.52) ap / 1/4-28 Tapped Thru lso ounterbore on oth Sides for #10 Socket Head ap Screw for Mounting asic imensions ouble Rack and Pinion Mini Rotary ctuator.88 (22.5) 1 2 5 4 H 2 5 Optional ouble nd Output Shaft ore H øk P 1/2".75 (95) 1.06 (27) 1.00 (25) 2.50 (64) 1.25 (2).75 (9.5) 1/8 NPT /4" 4.75 (121) 1.25 (2) 1.25 (2).00 (76) 1.50 (8).500 (12.70) 1/8 NPT 4 asic imensions ouble Rack and Pinion Mini Rotary ctuator with Integral ir-oil Tandem P.125 x.06 eep (.17 x 1.52) ap /.88 (22.5) 1 2 5 4 ir/oil Resevoir H 2 5 4 1.00 (25.40) 2.00 (50.80) 1/4-28 Tapped Thru lso ounterbore on oth Sides for #10 Socket Head ap Screw for Mounting Optional ouble nd Output Shaft ore H øk P /4" 5.75 (121).125 (8) 1.25 (2) 1.25 (2).00 (76) 1.50 (8).500 (12.70).1/8 NPT Port Positions Single Rack Port Positions ouble Rack without Rotation djustment Port Positions Integral ouble Rack Port Positions ouble Rack with Rotation djustment Single Rack ouble Rack Integral ir/oil Tandem ouble Rack ap ap ap / ap / ap / T-76
Rack & Pinion Rotary ctuators Single, ouble, and Integral ir/oil Tandem Rack & Pinion Rotary ctuators (ø1-1/8" & 2-1/2" ores) Features Single Rack and Pinion Rotary ctuators are designed for non-lube added service. Rotation angles 45, 90, 180, 270, and 60 standard. Urethane Noise ampening umpers optional. Viton Seals optional for higher temperatures. Optional Low Friction Seals. ody Mount or optional ngle racket, Front and Rear Flange Mountings. djustable ushions optional Flow ontrols Optional Intregal ir/oil optional Technical data Medium: Filtered compressed air to 150 PSI Petroleum based hydraulic fluid to 400 PSI Operating Temperature: -20 to 200 F (-29 to 9 ) with Standard Nitrile Seals -20 to 400 F (-29 to 204 ) with Viton Seals -20 to 250 F (-29 to 121 ) with Low Friction Seals Operating Pressure: 150 PSI (10 ar) 400 PSI (27.6 ar) Hydraulic (non-shock) ngle of Rotation: 45, 90, 180, 270, 60 Standard ny rotation up to 1080 can be supplied Rotational Tolerance: -0 + 10 acklash etween Rack & Pinion: 1-1/8" ore 2 position units 1 of arc maximum 1-1/2" 2-1/2" ore 2 position units 0 minutes of arc maximum Lubrication: None required Norgren Rotary ctuators are rated for no lube added service. ll internal components are lubricated at the time of assembly with a Teflon based grease. Should additional lubrication become necessary between the radial surface of the rack gear and the rack/pinion mesh area due to severe operating conditions, a grease fitting is provided. Materials nd aps: lack anodized 6061-T6 aluminum ody: 6061-T6 aluminum alloy, entirely hard coat anodized ear Rack: round and polished stress-proof steel Pinion ear and Output Shaft: Manufactured from high-strength steel. Shaft earings: Sealed, single row ball bearings Standard Seals: Nitrile Tube: 606-T82 aluminum alloy Tie Rods: Stress-proof steel Floating Pistons: Solid aluminum alloy Ordering information Model codes 2 5 0-1 - M 1 2 4 5 6 7 8 9 10 11 12 1 ore 1-1/8" 2 1-1/2" 2" 4 2-1/2" 5 Rack/Rotary Type Single Rack Standard Seals 0 Single Rack Low Friction Seals 1 ouble Rack Low Friction Seals 2 ouble Rack Standard Seals 5 Standard ir/oil Tandem 6 Integral ir/oil Tandem 7 Multiple Position ctuator 2 Position 0 Position 4 Position 4 5 Position 5 Rotation 45 90 180 270 60 Output Shaft Single nd Keyway Standard ouble nd Keyway Hollow Internal Keyway ross Keyway Preloaded Keyway *Standard Port Size and Location. MPL: 11/8" ore ouble Rack with Standard Seals 2 Position Rotary ctuator 180 Rotation ouble nd Keyway Standard Mounting Standard Port Located at Position 2 ushion Position 1 in nd ap No Flow ontrols umpers on ll aps nd ap Rotation djustments Standard Magnetic Piston Option lectroless Nickel Plated. Mounting Standard 1 Front Flange 2 Rear Flange ottom Flange 4 Port Location Position 1 2 4 5 Standard * F Oversized H J K Options No Option 0 lectroless Nickel O-Ring Loaded Piston Seals P Viton Seals V (Specify) Magnetic Option No Magnet 0 Standard Magnetic Piston M in Position & Integral ir/oil Tandems in Position & Rotation djustments No djustment 1 nd ap 2 nd ap nd aps & 4 nd aps & 5 Note: Standard rotation adjustments provide 0 of angle reduction. umper No umpers nd ap nd ap ll aps Note: ushions & Rotation djustment cannot be located in same end cap. Flow ontrols Needle Position 1 2 4 No Flow ontrols nd ap nd ap H J K nd aps & M N P R Note: Flow ontrols must be 90 to Port Location. Flow controls are Standard on all ir/ Oil Tandems. Standard ir/ Oil Tandem Flow ontrols are in end caps & in position #2. Integral ir/ Oil Tandem Flow ontrols are in position #5. ushions Needle Position 1 2 4 No ushions nd ap nd ap H J K nd aps & N M P R T-77 TUTORS
TUTORS Rotary ctuators are constructed with the finest materials for each component! 1 Floating Pistons: Solid aluminum alloy, lightweight for low inertia, yet strong. Provide excellent wear characteristics against the hard coated tube I.. 2 Seals: Lip type, pressure sensitive nitrile seals are wear compensating for long service life and minimum friction. 1 2 ctuator ody: Precision machined from 6061-T6, 40,000 PSI minimum yield aluminum alloy for strength. The entire body is then hard-anodized for maximum wear and corrosion resistance. 4 rease Fitting: asy access for additional lubrication. Single rack located on top; double located on top and bottom. 5 4 5 Retainers: luminum plates are located on the front and rear of the actuator body to ensure positive retention of the pinion/shaft/bearing assembly. 6 Tie Rods: Stress-proof steel to maintain compression on the tube end seals. 6 Single Rack Shown 12 8 7 8 7 Rotation djustment (optional): Up to 0 angle. 8 nd aps: Machined from 6061-T6 solid aluminum bar that is anodized for corrosion resistance. 9 10 11 45 90 180 270 60 rotations are standard and available in single or double rack models. Other rotations available up to 1080. 12 Tube: 606-T82 aluminum alloy which is ideally suited for air service. The tube is clear anodized on the O.. and hard anodic coated on the I.. which results in a smooth, file hard (60R), corrosion and score resistant surface finish. 9 Rack: round and polished stress-proof steel. 10 Shaft earings: Sealed, single row ball bearings provide exceptional shaft stability with a low coefficient of friction. 11 Pinion and Output Shaft: Manufactured from high strength steel for maximum strength and endurance. keyed output shaft is standard with other shaft options available. Options not shown: Low Friction Seals, artridge Speed ontrols,high Temperature Viton Seals, djustable ushions, umpers, Magnetic Piston for Position Sensing, Multi-Position Rotation apabilities. Seal Kits Standard Low Friction Viton ir/oil Tandem ore Part No. Part No. Part No. Part No. 1 1 /8" Single Rack 200SK 200TK 200VK We recommend 1 1 /8" ouble Rack 250SK 250TK 250VK that ir/oil 1 1 /2" Single Rack 00SK 00TK 00VK Tandems are 1 1 /2" ouble Rack 50SK 50TK 50VK returned to the 2" Single Rack 400SK 400TK 400VK factory for repair. 2" ouble Rack 450SK 450TK 450VK 2 1 /2" Single Rack 500SK 500TK 500VK 2 1 /2" ouble Rack 550SK 550TK 550VK T-78 Rotational Velocity Maximum rotational velocity of a rotary actuator is difficult to determine due to varying factors such as pressure, medium, flow and external loading. xcessive speeds in a given application can create inertia loads whose shock values could prove detrimental to the actuator. Use of external stops, cushions, or other deceleration devices will ensure maximum performance and actuator life.
asic imensions for Single and ouble Rack and Pinion Rotary ctuator ap Rack & Pinion Rotary ctuators Single, ouble, and Integral ir/oil Tandem Rack & Pinion Rotary ctuators (ø1-1/8" & 2-1/2" ores) ap imensions in inches (mm) F P F L H TUTORS M Keyway Retainer Plate Optional Mounting Holes O Thds. U eep (4) I Mounting Holes R Thds. T eep (4) N Remove the (4) Retainer Plate Screws to use the Mounting Holes on either side of the body. S J S Q ap ap F P F L H M Keyway Retainer Plate Optional Mounting Holes O Thds. U eep (4) I ap Mounting Holes R Thds. T eep (4) N ap Remove the (4) Retainer Plate Screws to use the Mounting Holes on either side of the body. imension egree Rotation 1-1/8" ore Single Rack 1-1/2" ore Single Rack 2" ore Single Rack 2-1/2" ore Single Rack 0. 4.500 (114) 6.500 (165) 7.750 (197) 8.000 (20) 45 5.590 (142) 8.025 (204) 10.195 (259) 10.445 (265) 90 6.571 (167) 9.97 (29) 12.95 (15) 12.645 (21) 180 8.5 (217) 12.142 (08) 16.796 (427) 17.046 (4) 270 10.495 (267) 14.887 (78) 21.197 (58) 21.447 (545) 60 12.457 (16) 17.62 (448) 25.598 (650) 25.848 (657) dd per.0218 (0.55).005 (0.77).0489 (1.24).0489 (1.24).12 (7.92).500 (12.70).688 (17.48) 1.000 (25.40) 2.250 (57) 2.750 (70) 4.000 (102) 4.000 (102).09 (2.6).125 (.18).187 (4.75).187 (4.75).625 (16) 1.000 (25) 1.000 (25) 1.000 (25).047 (1.19).060 (1.52).09 (2.6).09 (2.6).875 (22) 1.750 (44) 2.01 (52) 2.01 (52).24 (5.94).250 (6.5).500 (12.70).500 (12.70) 2.250 (57) 2.687 (68).718 (94).718 (94).250 (6.5).250 (6.5).47 (11.10).47 (11.10) F 1.500 (8) 2.000 (51) 2.500 (64).000 (76) FF.500 (12.70).750 (19.15) 1.125 (28.58) 1.125 (28.58).12 (84) 4.75 (111) 6.604 (168) 6.604 (168) H 1.656 (42) 2.187 (56).02 (84).02 (84) I 2.406 (61).187 (81) 4.878 (124) 4.878 (124) J 1.000 (25) 1.500 (8) 1.500 (8) 1.500 (8) øk.500 (12.70).875 (22.2) 1.125 (28.58) 1.125 (28.58) L.625 (16) 1.500 (8) 1.875 (47) 1.875 (47) M 1/8 x 1/16 /16 x /2 1/4 x 1/8 1/4 x 1/8 N 1.500 (8) 1.500 (8) 2.000 (51) 2.000 (51) O 1/4-20 1/4-20 7/16-14 7/16-14 P 1/8 NPT 1/4 NPT 1/4 NPT 1/4 NPT Q.45 (12).594 (15).86 (22).86 (22) R 1/4-20 5/16-24 1/2-20 1/2-20 S.250 (6).250 (6).75 (10).75 (10) T.250 (6).1 (8).500 (1).500 (1) U.250 (6).48 (11).48 (11).48 (11) S J S Q T-79
TUTORS Rack & Pinion Rotary ctuators Single, ouble, and Integral ir/oil Tandem Rack & Pinion Rotary ctuators (ø1-1/8" & 2-1/2" ores) 4-Position Rotary ctuator R = Rotation of base unit in degrees (Positions 1 and 4) S = hange in rotation of base unit (Position 2) T = hange in rotation of base unit (Position ) ap 5-Position Rotary ctuator R = Rotation of base unit in degrees S = hange in rotation of base unit (Position 2) T = hange in rotation of base unit (Position ) Z = hange in rotation of base unit (Position 4) Position Rotary ctuator* ap Shaft Options Internal Keyed Hollow Shaft can be utilized from either side and is flush with retaining plates. 2" bore 1.00" (25.4) hollow-optional 2-1/2" bore.688" (17.48) hollow-optional ross Keyed Shaft protrudes from retainer dimension. +. 002. 000 +.002.000 +. 001 FF POSITION #2 90 Flush with Retainer Surface +. 002. 000 Retainer Surface ap ap * position actuator is dimensionally interchangable with 2 position. 4 Position Rotary ctuator (R + S ) + (R x ) + (R + ) + ap 1 ap ap POSITION #1 0 POSITION #2 90 POSITION # 180 Output Shaft Pressurize Port(s) Position Number in ap(s) xhaust 1 ll other ports 2 & ll other ports ll other ports POSITION #1 0 POSITION # 180 ap 1 ap 1 ap ap (R + T ) + (R + S ) + 5 Position Rotary ctuator (R + Z ) + (R x ) + (R + ) + ap ap ap 1 POSITION #4 270 Output Shaft Pressurize Port(s) Position Number in ap(s) xhaust 1 ll other ports 2 1 & 1 ll other ports & ll other ports 4 ll other ports POSITION #2 67.5 POSITION # 125 ap 1 ap (R + T ) + T-80 ap (R + T ) + ap 1 POSITION #1 0 POSITION #5 270 Pressurize Port(s) POSITION #4 192.5 Output Shaft Position Number in ap(s) xhaust 1 ll other ports 2 1 & 1 ll other ports & ll other ports 4 1 & 1 ll other ports 5 ll other ports
Rack & Pinion Rotary ctuators Standard ir/oil Tandem is supplied with an ir/oil Tank. ir/oil Tank should have 20 PSI pressure header. Integral ir/oil Tandem is fully self-contained. The simplicity of compressed air with the smooth control of hydraulics. Provides extremely smooth, fully adjustable speed control of the actuator output shaft. TUTORS 1/8" NPT Oil Filler Port located on top Tank Mounting Holes are.20 drilled thru.28 ounterbore for #10 Socket Head ap Screw K NPT Port Standard ir/oil Tandem 4" max. ap ap ap Manifold ap ap Supplied w/steel Tubes.17 1-1/8 ore.12 1-1/2±2-1/2 ore ap luminum Tube w/optional Magnetic Pistons provided at aps & Length imensions for ir/oil Tandems imension egree Rotation 1-1/8" Standard 1-1/2" Standard 2" Standard 2-1/2" Standard 0. 5.125 (10) 7.500 (191) 8.750 (222) 9.000 (229) 45 6.215 (158) 9.025 (292) 11.195 (284) 11.445 (291) 90 7.196 (18) 10.97 (264) 1.95 (40) 1.645 (47) 180 9.158 (2) 1.142 () 17.796 (452) 18.046 (458) 270 11.121 (282) 15.887 (404) 22.197 (56) 22.447 (570) 60 1.082 (2) 18.62 (47) 26.598 (676) 26.848 (682) imension egree Rotation 1-1/8" Integral 1-1/2" Integral 2" Integral 2-1/2" Integral 0. 6.125 (156) 8.000 (20) 9.500 (241) 10.000 (254) 45 7.215 (18) 9.525 (242) 11.945 (0) 12.445 (16) 90 8.196 (208) 10.897 (277) 14.145 (59) 14.645 (72) 180 10.158 (258) 1.642 (47) 18.546 (471) 19.046 (484) 270 12.120 (08) 16.87 (416) 22.947 (58) 2.447 (596) 60 14.082 (58) 19.12 (486) 27.48 (695) 27.848 (707) dd per.0218 (1).005 (1).0489 (1).0489 (1) imensions for ir/oil Tanks Rotary ctuator ir/oil Tank Tank ore Size Model Number ore Size K 1-1/8" OT-2252 1-1/8" 1.500 (8).125 (79) 2.750 (70).750 (19) 1/8" NPT 1-1/2" OT-225 1-1/8" 1.500 (8) 4.125 (105).750 (95).750 (19) 1/8" NPT 2" OT-2254 1-1/8" 1.500 (8) 5.125 (10) 4.750 (121).750 (19) 1/8" NPT 2-1/2" OT-2255 1-1/8" 1.500 (8) 6.125 (156) 5.750 (146).750 (19) 1/8" NPT T-81
TUTORS Standard ir/oil Tandem Rotary unit is supplied with an ir/oil Tank that requires a 20 PSI pressure header. TO ORR: enter option code 6 in Rack/Rotary Type position 2. heck Valve Fitting Manifold artridge Speed ontrol artridge Speed ontrol ø1-1/2" thru ø2-1/2" ores only. NOT: artridge Speed ontrol & ushion are not available on same end cap. 5/16" Noise ampening umper Urethane bumpers attached to the actuator piston provides quiet operation by preventing metal to metal contact. NOT: ach bumper adds 1/4" to dimension. Rotation djustment Located in the actuator end cap, each rotation adjustment provides up to 0 of angle reduction. NOT: ushion & Rotation djustment are not available on the same end cap. ore 1-1/8" 1-1/2" 2" 2-1/2".687 (17.46).98 (2.81) 1.187 (0.16) 1.187 (0.16) ushioning The ushioning Principle ushions permit the trapping of cylinder exhaust volume prior to the completion of full rotation. This volume is then metered through a finely tapered needle to deliver smooth, adjustable deceleration of the rotary actuator. NOT: On 1-1/8" bores, add 1/2" to overall dimension for each cushion block..500 (12.70) ushion locks ushion esign 1-1/8" ore.500 (12.70) djustable ushioning Flush, self locking adjustment needle allows fine cushion metering. ushion design features a unique, one piece, nitrile compound seal captured within a groove machined to exacting tolerances. This allows linear and radial float of the cushion seal, virtually eliminating problems associated with misalignment. The design also provides exceptionally fast out of cushion rotation reversal. djustment Needle ushion ushion esign 1-1/2" or 2-1/2" ore isplacement Load earing apacity Unit Weights isplacement istance for ach egree xial Load Radial Load etween Unit Weight Unit Weight Unit Weight dd for ouble of Rotation earing apacity earing apacity earings 90 180 60 Output Shaft ore Size Inch (mm ) lbs (Kg) lbs (Kg) Inch (mm) lbs (Kg) lbs (Kg) lbs (Kg) lbs (Kg) 1-1/8" Single Rack.0108 (177) 100 (45) 200 (91) 1.8 (5).5 (1.59).75 (1.70) 4.25 (1.9).06 (.0) 1-1/8" ouble Rack.0216 (54) 100 (45) 200 (91) 1.8 (5) 6 (2.72) 7 (.18) 8.5 (.86).06 (.0) 1-1/2" Single Rack.0270 (44) 225 (102) 450 (204) 1.56 (40) 6.75 (.06) 7.5 (.41) 9 (4.09).44 (.16) 1-1/2" ouble Rack.0540 (885) 225 (102) 450 (204) 1.56 (40) 10.5 (4.77) 12.75 (5.79) 17.25 (7.8).44 (.16) 2" Single Rack.0760 (1254) 500 (227) 1000 (454) 2.28 (58) 18 (8.17) 19.5 (8.85) 21 (9.5).656 (.0) 2" ouble Rack.1520 (2491) 500 (227) 1000 (454) 2.28 (58) 22 (9.98) 24 (10.90) 27 (12.26).656 (.0) 2-1/2" Single Rack.1200 (1966) 500 (227) 1000 (454) 2.28 (58) 18.5 (8.40) 20 (9.08) 22 (9.99).656 (.0) 2-1/2" ouble Rack.2400 (9) 500 (227) 1000 (454) 2.28 (58) 22.5 (10.22) 24.5 (11.12) 27.5 (12.49).656 (.0) Theoretical Torque Output in Inch-pounds per PSI (Newton-meters per ar) Inch- (Newton- PSI (ar) pounds meters ore Size 40 (2.8) 60 (4.1) 80 (5.5) 90 (6.2) 100 (6.9) 125 (8.6) 150 (10.) 200 (1.8) 250 (17.2) 400 (27.6) per PSI per ar) 1-1/8" Single Rack 25 (2.8) 7 (4.2) 50 (5.6) 56 (6.) 62 (7.0) 78 (8.8) 9 (17.5) 124 (10.5) 156 (17.6) 249 (28.1).6 (.59) 1-1/8" ouble Rack 50 5.6) 75 (8.4) 100 (11.) 112 (12.7) 124 (14.1) 155 (17.6) 187 (21.1) 249 (28.1) 11 (5.1) 498 (56.2) 1.2 (1.97) 1-1/2" Single Rack 62 (7.0) 9 (10.4) 124 (14.0) 19 (15.7) 155 (17.5) 194 (21.9) 22 (26.2) 10 (5.0) 87 (4.7) 620 (70.0).6 (2.62) 1-1/2" ouble Rack 12 (14.0) 186 (21.0) 248 (28.0) 279 (1.5) 10 (5.0) 87 (4.8) 465 (52.5) 620 (70.0) 774 (87.5) 129 (140.0).2 (5.24) 2" Single Rack 175 (19.9) 264 (29.8) 52 (9.7) 96 (44.7) 440 (49.7) 550 (62.1) 660 (74.4) 879 (99.) 1099 (124.1) 1758 (198.6) 4.4 (7.21) 2" ouble Rack 52 (9.7) 528 (59.6) 70 (79.5) 791 (89.4) 879 (99.) 1099 (124.1) 119 (149.0) 1758 (198.6) 2198 (248.) 517 (97.2) 8.8 (14.41) 2-1/2" Single Rack 275 (1.0) 412 (46.6) 550 (62.1) 619 (69.9) 687 (77.7) 860 (97.1) 101 (116.5) 175 (155.) 1719 (194.1) 2750 (10.6) 6.9 (11.0) 2-1/2" ouble Rack 550 (62.1) 825 (9.2) 1100 (124.2) 127 (19.8) 175 (155.) 1719 (194.1) 2062 (22.9) 2750 (10.6) 47 (88.2) 5500 (621.2) 1.8 (22.60) NOT: ir/oil Tandem and Multiple Position Rotary ctuators utilize a double rack configuration; however, the torque output of a Single Rack unit apply. educt 10% from torque output for frictional loss. educt 20% for frictional loss on all ir/oil Tandem Rotary ctuators. T-82