MICRO 200 MICRO 200 The MICRO 200 Titanium Implant System has been developed to meet all requirements in craniofacial osteosynthesis of the upper third of the skull. Areas of Application: Naso-orbital Area Infra-orbital Area Exterior wall of the maxillary sinus Cranial Area Frontal sinus Fixation of bone transplants OMF / Oral Maxillo Facial
MICRO 200 Table of contents Screws Page 3 MICRO 200 Plates Page 4 CAD-Plates, MICRO-MESH Page 5 Screwdrivers Page 6 Blades, Drills Page 7 Instruments Page 8 Container Page 9 Ordering information Page 0 Color code: blue Page 2
Self-tapping Screws (Packaging: 0/ea.) LOCK-DRIVE Screw Art. No. Diameter x Length 09-70202.2 x 2 mm 09-70203.2 x 3 mm 09-70204.2 x 4 mm 09-70205.2 x 5 mm 09-70206.2 x 6 mm 09-70207.2 x 7 mm 09-70208.2 x 8 mm 09-702.2 x mm 09-7023.2 x 3 mm 09-7025.2 x 5 mm CROSS-FIT Screw Art. No. Diameter x Length 09-80202.2 x 2 mm 09-80203.2 x 3 mm 09-80204.2 x 4 mm 09-80205.2 x 5 mm 09-80206.2 x 6 mm 09-80207.2 x 7 mm 09-80208.2 x 8 mm 09-802.2 x mm 09-8023.2 x 3 mm 09-8025.2 x 5 mm LOCK-DRIVE Emergency Screw Art. No. Diameter x Length 09-70504.5 x 4 mm 09-70506.5 x 6 mm 09-70508.5 x 8 mm 09-70509.5 x 9 mm 09-705.5 x mm 09-7053.5 x 3 mm 09-7055.5 x 5 mm CROSS-FIT Emergency Screw Art. No. Diameter x Length 09-80504.5 x 4 mm 09-80506.5 x 6 mm 09-805.5 x mm 09-8053.5 x 3 mm 09-8055.5 x 5 mm Page 3
MICRO 200 Plates (Packaging: /ea.) Thickness: 0.6 mm 6-hole 2-0604 2-064 2-065 2-0606 2-0607 2-0608 2-066 2-0680 2-0682 2-0620 2-062 2-0624 2-0625 2-0622 2-0623 2-0626 2-0627 2-064 2-0642 2-0643 2-0644 2-0646 2-0660 2-0674 2-0675 2-0662 2-0663 Art. No. Description 2-0604 4-hole Plate, straight 2-064 4-hole Plate, bar 6 mm 2-065 4-hole Plate, bar 9 mm 2-0606 6-hole Plate, straight 2-0607 6-hole Plate, bar 7.5 mm 2-0608 8-hole Plate, straight 2-066 6-hole Plate, straight 2-0680 6-hole Orbital Plate 2-0682 8-hole Orbital Plate 2-0620 5-hole L-Plate right 2-062 5-hole L-Plate left 2-0624 4-hole L-Plate, bar 7.5 mm, right 2-0625 4-hole L-Plate, bar 7.5 mm, left 2-0622 8-hole L-Plate, right 2-0623 8-hole L-Plate, left Art. No. Description 2-0626 5-hole L-Plate, bar 2 mm, right 2-0627 5-hole L-Plate, bar 2 mm, left 2-064 7-hole T-Plate 2-0642 4-hole T-Plate, bar 9 mm 2-0643 4-hole T-Plate, bar 7.5 mm 2-0644 9-hole H-Plate, small 2-0646 4-hole H-Plate, large 2-0660 6-hole Y-Plate 2-0674 4-hole Y-Plate, bar 8 mm 2-0675 4-hole Y-Plate, bar 2 mm 2-0662 6-hole X-Plate, small 2-0663 7-hole X-Plate, large Page 4
CAD-Plates (Packaging: /ea.) Thickness: 0.6 mm 2-06303 2-0635 2-06325 2-06335 2-0637 2-06327 2-06337 Art. No. Description 2-06303 3-hole CAD-Plate, triangular 2-0635 4-hole CAD-Plate, square 2-06325 6-hole CAD-Plate, square 2-06335 8-hole CAD-Plate, square 2-0637 4-hole CAD-Plate, rectangular 2-06327 6-hole CAD-Plate, rectangular 2-06337 8-hole CAD-Plate, rectangular Titanium MICRO-MESH (Packaging: /ea.) MICRO-MESH MICRO-MESH, Thickness: 0. mm MICRO-MESH, Thickness: 0.2 mm Art. No. Length x Width x Thickness 2-0700 50 x 30 x 0. mm 2-07002 00 x 60 x 0. mm 2-07003 00 x 30 x 0. mm 2-07004 50 x 60 x 0. mm 2-07005 20 x 20 x 0. mm Art. No. Length x Width x Thickness 2-070 50 x 30 x 0.2 mm 2-0702 00 x 60 x 0.2 mm 2-0703 00 x 30 x 0.2 mm 2-0704 50 x 60 x 0.2 mm 2-0705 20 x 20 x 0.2 mm Page 5
Screwdrivers 2-2000 Screwdriver handle, 9 cm 2-2066 Screwdriver handle, short, 6 cm 2-200 LOCK-DRIVE blade, self-retaining 2-2008 CROSS-FIT blade, self-retaining 2-209 CROSS-FIT screwdriver with holding device 2-2054 CROSS-FIT holding device, not self-retaining 2-200 LOCK-DRIVE, Screwdriver fixed, 3 cm, self-retaining 2-208 CROSS-FIT, Screwdriver fixed, 3 cm, self-retaining Page 6
Blades for Angled Handpieces 2-2002 LOCK-DRIVE blade, short, 2 cm, DENTAL, self-retaining 2-2009 CROSS-FIT blade, short, 2 cm, DENTAL, self-retaining Drills Max..000 rpm Art. No. Diameter x Length Working Length (WL) End 2-2604.0 x 47 mm 5 mm Stryker 2-2607.0 x 50 mm 7 mm Stryker 2-2608.0 x 50 mm 8 mm Stryker 2-262.0 x 54 mm 5 mm Stryker 2-264.0 x 47 mm 5 mm Dental 2-268.0 x 50 mm 8 mm Dental 2-269.0 x 50 mm 5 mm Dental 2-2620.0 x 20 mm 5 mm Dental 2-2622.0 x 23 mm 8 mm Dental 2-2623.0 x 25 mm 0 mm Dental 2-2625.0 x 30 mm 5 mm Dental Page 7
Instruments 2-2033 Plate cutter, cm 0-60025 Flat nose pliers, 3.5 cm 2-2024 Aderer modular plate bending pliers, 2.5 cm 2-2028 Bending pliers with pin, 3 cm 2-2029 Plate holding fork/ball, double-ended, 8 cm 0-60030 Plate holding forceps curved, 8 cm Page 8
Container 73-330 Instrument tray, empty 73-3030 Implant tray, empty Page 9
MICRO 200 BASIC Set (Recommendation) Ordering information Art. No. Quantity Description 2-0600 MICRO 200 Set LOCK-DRIVE complete consisting of: Sterilization and Storage 73-35000 73-98053 73-330 73-3030 2-2000 2-200 2-200 2-2024 0-60025 2-2033 0-60030 2-2604 2-2608 09-70203 09-70204 09-70205 09-70206 09-70207 09-70504 2-0604 2-0606 2-066 2-062 2-0620 2-064 2-0644 2-0660 2-0662 2 2 2 Sterilizing container Container label blue MICRO 200 Instrument tray Implant tray Instruments Screwdriver handle, 9 cm LOCK-DRIVE blade LOCK-DRIVE screwdriver, fixed Aderer modular bending pliers Flat nose pliers Plate cutter Plate holding forceps Drills (Stryker shaft end) Drill.0 x 47 mm, WL 5 mm Drill.0 x 50 mm, WL 8 mm LOCK-DRIVE Screws LD Screw.2 x 3 mm, 0/ea. LD Screw.2 x 4 mm, 0/ea. LD Screw.2 x 5 mm, 0/ea. LD Screw.2 x 6 mm, 0/ea. LD Screw.2 x 7 mm, 0/ea. LD Emerg. Screw.5 x 4 mm, 0/ea. MICRO 200 bone plates 4-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 5-hole L-Plate, left, /ea. 5-hole L-Plate, right, /ea. 7-hole T-Plate, /ea. 9-hole H-Plate, small, /ea. 6-hole Y-Plate, /ea. 6-hole X-Plate, small, /ea. Art. No. Quantity Description 2-06002 MICRO 200 Set CROSS-FIT complete consisting of: Sterilization and Storage 73-35000 73-98053 73-330 73-3030 2-2000 2-2008 2-208 2-2024 0-60025 2-2033 0-60030 2-2604 2-2608 09-80203 09-80204 09-80205 09-80206 09-80207 09-80504 2-0604 2-0606 2-066 2-062 2-0620 2-064 2-0644 2-0660 2-0662 2 2 2 Sterilizing container Container label blue MICRO 200 Instrument tray Implant tray Instruments Screwdriver handle, 9 cm CROSS-FIT blade CROSS-FIT screwdriver, fixed Aderer modular bending pliers Flat nose pliers Plate cutter Plate holding forceps Drills (Stryker shaft end) Drill.0 x 47 mm, WL 5 mm Drill.0 x 50 mm, WL 8 mm CROSS-FIT Screws CF Screw.2 x 3 mm, 0/ea. CF Screw.2 x 4 mm, 0/ea. CF Screw.2 x 5 mm, 0/ea. CF Screw.2 x 6 mm, 0/ea. CF Screw.2 x 7 mm, 0/ea. CF Emerg. Screw.5 x 4 mm, 0/ea. MICRO 200 bone plates 4-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 6-hole Plate, straight, /ea. 5-hole L-Plate, left, /ea. 5-hole L-Plate, right, /ea. 7-hole T-Plate, /ea. 9-hole H-Plate, small, /ea. 6-hole Y-Plate, /ea. 6-hole X-Plate, small, /ea. 2-0600- LOCK-DRIVE Instruments without implants 2-06002- CROSS-FIT Instruments without implants Page 0
Notes Page
High Quality Implants Made by MONDEAL We reserve the right to make catalog and design changes arising from further developments and modifications. Pictures, product descriptions and texts are the property of MONDEAL Medical Systems GmbH. Further use and reproduction by Third Parties requires written consent from MONDEAL Medical Systems GmbH. All rights reserved! Note: Responsibility for the selection of the patient, for adequate training as well as the decision as to the choice and use of the implants, a post-operative removal or retention of implants is the sole decision of the surgeon. All brands and logos referred to in this brochure, registered by Third Parties, are subject without restriction to the legal provisions currently in force and to the rights of ownership of the respective registered owner. 20 - MONDEAL Medical Systems GmbH Am Gewerbering 7 78570 Mühlheim a. d. Donau/Germany Phone +49 7463 99307 0 Fax +49 7463 99307 33 mail@mondeal.de 97-D0-E MICRO 200 0/ 04-