VILLA VISTA EPA WOOD BURNING FIREPLACES Traditional Fireplace Design Collection TRULY TIMELESS
SHOW YOURSELF Create a room that begs you to stick around, sit down and relax. IN FEATURED Villa Vista with Del Sol Decorative Grill and White Herringbone Textured Panels
FEATURED Villa Vista with White Herringbone Textured Panels and Del Sol Decorative Grill EXCLUSIVE FEATURES Circulating louvered design features ceramic glass for optimum heat transfer (optional clean-face kit available) EPA phase II certified and Washington State approved wood heater 3.8 cubic foot insulated firebox that accepts up to 20 log size for increased performance White herringbone textured refractory panels with integrated ash lip and decorative cast iron log retainer Air combustion control for variable heat output with air boost for faster wood ignition during startup Catalytic combustor for maximum performance with bypass control Includes insulated outside air kit (required for use) 75% thermal efficiency and heats up to 2,500 square feet* Efficient air wash system that keeps glass clean Cast iron door with heat resistant door handle that stays cool to the touch Optional heat activated 200 CFM UZY-5 variable speed blower for time-delayed heat distribution Dual ducted gravity kit (required when using clean-face kit) and/or thermostatically controlled forced air kit available (three maximum outlets) Durable high temperature paint finish Uses SCIL (ACBI) 7 air cooled wood burning chimney Uses SCIL (ASHT / HT6103 / S-2100 / HT6000) 7 insulated wood burning chimney Lifetime Limited Warranty
decorative grills Del Sol Diamante Strada CATALYTIC COMBUSTION The Villa Vista fireplace s catalytic combustion helps increase efficiency and save energy. It produces more heat using less wood and gives you longer burn times for heating through the night. Catalytic combustion reduces creosote buildup by 90%, thereby greatly minimizing a major cause of chimney fires. The Villa Vista fireplace offers maximum energy efficiency while consuming less fuel. It s an investment that pays for itself over time. ADDITIONAL OPTIONS Black Arch Door (Required) Del Sol, Diamante or Strada Louver Kits (One Required) Clean-Face Kit Rigid Fire Screen Double Duct Gravity Kit (Required for Clean-Face Kit) Forced Air Kit Heat Activated Blower Variable Speed Switch for Blower ENGINEERING FEATURES AND SPECIFICATIONS 1 4 Chimney* (uses 7 ACBI, ASHT, HT6103, S-2100 or HT6000 wood burning chimney) Insulation Gravity Kit (optional) 3 5 2 Flue Exhaust Secondary Air Combustion Combustible Air Blower (optional) Easily Adjustable Air Control Convection Air Outlet Catalytic Air Combustion Catalyst Air Wash System Radiant Heat Cast-Iron Log Retainers Convection Air Inlet Integrated Ash Drawer Outside Air intake 1 2 3 4 5 Single door provides an unobstructed panoramic view of the flames Dual-handle ash drawer with lid Air intake lever allows better combustion control, producing from 10,000 to 70,000 BTU/hr (with cordwood). Bypass control overrides the catalyst combustor restrictive passageway when opening the door White Herringbone Textured Panels *Air-cooled chimney not recommended for use at elevations above 4,000 feet or in climates where temperatures will fall below 32º Fahrenheit (0º Celsius). BURN RATES* 800 F 600 F 400 F 200 F 1 2 3 4 5 6 7 8 HOURS *Results obtained by burning 25 lbs. of dry maple wood. (one hour pre-heating)
APPLIANCE SPECIFICATIONS INSTALLATION SPECIFICATIONS Front View 47-1/8 1197mm 19 483mm 45-3/32 1145mm WARNING: The outlet grills should not be installed fac - ing upward through a floor. Danger of burns can result if grills in floor are stepped on. Outlet Grill 22-1/2 572mm 38 965mm Outlet Grill 13 13" x (330mm x 13 330mm) 13" 10 (3.1m) 10' Max. MAX. 7 ASHT Wood burning chimney 3-3/4" Top View 30-1/16" 11-1/4" 11-1/4" 10 (3.1m) 10' MAX. Max. 10-3/8" 14-3/8" 24-1/2" Knockout for gravity ducting Maintain at least 6-1/2 (160 mm) clearance from the outlet grill framing to a combustible ceiling, side wall or mantel. Left Side View Knockout for 14-7/8" forced Knockout air for (side forced air or rear) Right Side View Knockout for forced Knockout air for 14-7/8" (side or forced rear) air PRODUCT SPECIFICATIONS 36-1/16" 3-13/16" 14-7/8" Outside air intake Junction box access IMPORTANT NOTES: As with any fireplace, this appliance is extremely hot during operation. Read and understand all operating instructions before using this appliance. For further information, consult your dealer. Local conditions, such as elevation, wind, vent configuration and choice of fuel will affect overall appearance of the fire and heating performance. Performance can also vary with home design and insulation, climate, condition and type of fuel used, appliance location, burn rate, accessories chosen, chimney installation and how the appliance is operated. Diagrams, illustrations and photographs are not to scale consult installation instructions. Product designs, materials, dimensions, specifications, colors and prices are subject to change or discontinuance without notice. 13-9/16" 2-15/16" 38-1/8" Glass Viewing Area (W x H) 22-1/2" x 19" Firebox Interior (W x H x D+) 22" x 20" x 15" Interior Cubic Feet 3.8 Maximum Log Size 20" Chimney Size 7" EPA Rating 4.0 grams/hr BTU s 70,000 Heating Capacity (up to) 2,500 sq. ft. Thermal Efficiency 75% Blower 200 CFM Weight 403 lbs. +Measured in front of door Visit us online 2014 Innovative Hearth Products 785374M 07/14 Astria.us.com