FCC COMPLIANCE TEST REPORT

FCC COMPLIANCE TEST REPORT Technical Statement of Conformity in accordance with FCC Part 15 Subpart B The product Equipment Under Test Model Number Product Series Report Number Issue Date Test Result :SAS/SATA Trayless Multi-Bay Backplanes :BPN-DE340SS :BPN-DE230SS, BPN-DE230SS-BLACK, BPN-DE230SS-BLUE, BPN-DE230SS-RED, BPN-DE230SS-SILVER, BPN-DE340SS-BLACK, BPN-DE340SS-BLUE, BPN-DE340SS-RED, BPN-DE340SS-SILVER :HA100183-SAFD :25-FEB-2011 :Compliance is produced by IStarUSA Group 727 Phillips Dr. City of Industry,CA.91748, U.S.A. HongAn TECHNOLOGY CO., LTD. NO.15-1, CWEISHUH KENG, CWEIPIN VILLAGE, LINKOU, TAIPEI COUNTY, TAIWAN, R. O. C. TEL: +886-2-26030362 FAX: +886-2-26019259 E-mail: hatlab@ms19.hinet.net BSMI Registration No.: SL2-IN-E-0023, SL2-A1-E-0023, Nemko Authorization No.: ELA184 SL2-IS-E-0023, SL2-R1-E-0023, TAF Accreditation No.: 1163 SL2-R2-E-0023, SL2-L1-E-0023 VCCI Registration No.: R-2156, C-2329, T-219 FCC Designation No.: TW1001 FCC Test Report Page 1 of 25

Contents 1 General Description 5 1.1 Description of EUT 5 1.2 Test Instruments 7 1.3 Auxiliary Equipments 8 1.4 EUT SETUP 9 1.5 Identifying the Final Test Mode 9 1.6 Final Test Mode 10 1.7 Condition of Power Supply 10 1.8 EUT Configuration 10 1.9 Qualification of Test Facility 10 2 Conducted Disturbance Emission Test 11 2.1 Test Instruments 11 2.2 Test Arrangement and Procedure 11 2.3 Conducted Disturbance Limit 12 2.4 Test Result 12 3 Radiated Disturbance Emission Test 15 3.1 Test Instruments 15 3.2 Test Arrangement and Procedure 15 3.3 Radiated Disturbance Limit 16 3.4 Test Result 16 4 Photographs of the Tests 18 4.1 Conducted Disturbance Emission Test 18 4.2 Radiated Disturbances Emission Test 19 5 Photographs of the EUT 20 FCC Test Report Page 2 of 25

Verification Applicant Address of Applicant Manufacturer Address of Manufacturer Equipment Under Test : IStarUSA Group : 727 Phillips Dr. City of Industry,CA.91748, U.S.A. : C&C TECHNIC TAIWAN CO., LTD. 14F, NO. 106, SEC.1, TSIN TAI WU RD., SHI CHIH, : TAIPEI, TAIWAN. R.O.C. : SAS/SATA Trayless Multi-Bay Backplanes Model Number Product Series : Sample Received Date Test Standard: : BPN-DE340SS BPN-DE230SS, BPN-DE230SS-BLACK, BPN-DE230SS-BLUE, BPN-DE230SS-RED, BPN-DE230SS-SILVER, BPN-DE340SS-BLACK, BPN-DE340SS-BLUE, BPN-DE340SS-RED, BPN-DE340SS-SILVER : 31-MAY-2010 Emission: FCC Part 15 Subpart B: Class B CISPR 22: Class B Deviations from standard test methods & any other specifications : NONE Remark: 1. This report details the results of the test carried out on one sample. 2. The test result is deemed satisfactory evidence of compliance with ICES-003. 3. This report applies to the above sample only and shall not be reproduced in part without written approval of HongAn Technology Co., Ltd. Documented by: LiYuen Miao LiYuen Miao/ ADM. Dept Staff Tested by: H.B.LIANG/ ENG. Dept. Staff Approved by: Date: 2011-02-25 I.H.Hung / Section Manager FCC Test Report Page 3 of 25

Summary of Test Result Emission Test Standard Test Item Test Result Remark Highest Emission: FCC Part15 Neutral: Subpart B, Conducted Disturbance Compliance 0.307 MHz, CISPR22 11.720 dbuv(average) Class B Margin -38.330 db. Highest Emission: Verical : FCC Part15 39.99 MHz, Subpart B, Radiated Disturbances Compliance 29.52 dbuv (Quasi-Peak), CISPR22 Margin -0.48 db, Class B Antenna Height 1 m, Turntable Angle 0. FCC Test Report Page 4 of 25

1 General Description 1.1 Description of EUT Equipment Under Test Model Number of EUT : SAS/SATA Trayless Multi-Bay Backplanes : BPN-DE340SS Product Series : BPN-DE230SS, BPN-DE230SS-BLACK, BPN-DE230SS-BLUE, BPN-DE230SS-RED, BPN-DE230SS-SILVER, BPN-DE340SS-BLACK, BPN-DE340SS-BLUE, BPN-DE340SS-RED, BPN-DE340SS-SILVER Adapter Manufacturer : Sunny Model No. : SYS1381-0909-W2E EMC Approval : CE Mark Power Supply : Input : 100-240V~0.5A MAX, 50-60Hz Output :9Vdc, 1.0A Power Cord 2 Pin, Adapter to EUT 2 Pin Detachable: AC to Adapter m Adapter to EUT m w Ferrite Core 2 Non- Un-Detachable: AC to Adapter 0.01 m Adapter to EUT 1 m w/o Ferrite Core Power Inlet*1 D-SUB In Port*8 I/O Port : D-SUB Out Port*2 USB Port*2 Audio In Port*1 Audio Out Port*1 D-SUB In Port Detachable:1.8m w Ferrite Core Non- Un-Detachable w/o Ferrite Core Data Cable : D-SUB Out Port Non- Detachable:1.8m Un-Detachable w Ferrite Core *2 w/o Ferrite Core FCC Test Report Page 5 of 25

USB Port Detachable:1.8m w Ferrite Core Non- Un-Detachable w/o Ferrite Core Audio Port Detachable:1.8m w Ferrite Core Non- Un-Detachable w/o Ferrite Core Power Port Specification : Non- Detachable: m Un-Detachable:1m w Ferrite Core *2 w/o Ferrite Core Position : Table-top / Floor-standing Dimensions: 80 mm (L) X 200 mm (W) X 40 mm (H) For more detail specification, please refer to the User Manual. Feature Comparison Circuit Diagram W/O Difference Difference PCB Layout W/O Difference Difference Internal Components W/O Difference Difference Product Variance : Appearance W/O Difference Difference Function W/O Difference Difference Remark : 1. The manufacturer declares that the only difference between the EUT and its product series is the different appearance. 2. Only Applicant are different from the original report HA100183-CE; other contents are the same. FCC Test Report Page 6 of 25

1.2 Test Instruments 1.2.1. Instruments Used for Emission Measurement Instrument Manufacture Model Serial Last Cal. Next Cal. Test Item Name Mode Number Number Date Date LISN EMCO 3810/2NM 9702-1820 16-JUL-2010 16-JUL-2011 Rolf Heine LISN Hochfrequenz NNB-4/32T 00001 22-FEB-2010 22-FEB-2011 technik RF Current Probe FCC F-33-4 53 14-MAY-2010 14-MAY-2011 Conducted Emission Conducted Emission Conducted Emission Impedance Stabilization SCHAFFNER ISN T400 16832 Network (ISN) 29-OCT-2009 29-OCT-2010 Conducted Emission Conducted EMI Test Signal Emission, PMM PMM 9000 4410J10302 15-JUL-2010 15-JUL-2011 Analyzer Radiation Emission Spectrum Radiated ADVANTEST R3172 101202158 23-JUN-2010 23-JUN-2011 Analyzer Emission Preamplifier CHASE CPA 9231A 3310 08-JUL-2010 08-JUL-2011 Radiated Emission Preamplifier HD HD17187 004 04-AUG-2009 04-AUG-2010 Radiated Emission Bilog Antenna CHASE CBL 6112B 2860 12-AUG-2009 12-AUG-2010 Radiated Emission Double-Ridged Radiated Waveguide EMCO 3115 9912-5992 07-MAY-2010 07-MAY-2011 Emission Horn The test equipments used are calibrated and can be traced to National ITRI and International Standards. FCC Test Report Page 7 of 25

1.3 Auxiliary Equipments 1.3.1. Provided by HongAn Technology Co., Ltd. for Emission Test. No. Equipment Model No. Serial No. EMC Approved Brand A2 PC DCSCMF 1HP1Z1S FCC DoC DELL Description Data Cable Power Cable EUT Signal Cable 1 Unshielded, 1.8m A3 PC DCSCMF 2HP1Z1S FCC DoC DELL EUT Signal Cable 2 Unshielded, 1.8m B5 Keyboard SKB-2506 C0008208115 CE Mark, FCC DoC Hewlett Packard (Foil),1.8m N/A B2 Keyboard Y-BP62a 867604-0121 CE Mark,FCC DoC Logitech C6 Mouse MU29J 23-060843 CE Mark,FCC DoC IBM C2 Mouse M-BT83 810-000361 CE Mark Logitech E1 Monitor SDM-X73 9273312 FCC DoC Sony E4 Monitor VW161 85LMTN090836 CE Mark,FCC DoC ASUS D1 Modem E210 N/A CE Mark,FCC DoC MAIAC D3 Modem E210 N/A CE Mark,FCC DoC, MAIAC (Foil),1.8m (Foil),1.8m (Foil),1.8m (Braid),1.8m with EMI core*2 (Braid),1.8m with EMI core*2 (Braid),1m (Braid),1m N/A N/A N/A Unshielded, 1.8m Unshielded, 1.8m Unshielded,1m with EMI core*1 Unshielded,1m with EMI core*1 01 Headphone + Microphone 3.5 Type N/A CE Mark Emalk Unshielded,2m N/A 1.3.2. Provided by the Manufacturer No. Equipment Model No. Serial No. EMC Approved Brand Data Cable Description Power Cable 01 EUT Signal Cable 1 D-SUB+ Audio In+ Audio Out Type N/A N/A C&C (Braid), 1.8m N/A 02 EUT Signal Cable 2 D-SUB+ PS2 Type N/A N/A C&C (Braid), 1.8m N/A 03 Power Adapter SYS1381-0909-W2E N/A CE Mark Sunny N/A Adapter to EUT Unshielded*1m with EMI core*2 FCC Test Report Page 8 of 25

1.4 EUT SETUP DUP DUP DSD UUP DSD DSD DUP DSD DUP Monitor PC EUT EUT PC Monitor DUP DSD Adapter UUP DSD DUP Modem Power Box Modem USD Keyboard USD Mouse DUD Headphone + Microphone USD Keyboard USD Mouse Note: 1. Main Test Sample: BPN-DE340SS The series products were not tested. 2. I/O Port Setup Type of Port Total Q ty Test Status Power Inlet 1 Operating 1 D-SUB In Port 8 Operating 2 D-SUB Out Port 2 Operating 2 USB Port 2 Operating 2 Audio In Port 1 Operating 1 Audio Out Port 1 Operating 1 3. Legend: UUD : Undetachable Unshielded Data cable. UUP : Undetachable Unshielded Power cord. USD : Undetachable Data cable. USP : Undetachable Power cord. DSD : Detachable Data cable. DUP : Detachable Unshielded Power cord. DUD : Detachable Unshielded Data cable. DSP : Detachable Power cord. UTP : Unshielded Data Twisted Pair Cable. STP : Data Twisted Pair Cable. 1.5 Identifying the Final Test Mode Operation Mode:Standby mode(power on only). Note: After pre-test, we identified that the Operation Mode (the worst case) was most likely to cause maximum disturbance and most likely to be susceptible to disturbance. Therefore, the Final EMC FCC Test Report Page 9 of 25

Assessment was performed for the worst case. 1.6 Final Test Mode Operation Mode 1.7 Condition of Power Supply AC 120 V; 60 Hz 1.8 EUT Configuration 1. Setup the EUT as shown in Sec.1.4 EUT SETUP. 2. Turn on the power of all equipments. 3. Activate the selected Final Test Mode. 1.9 Qualification of Test Facility BSMI Certificate No. : SL2-IS-E-0023, SL2-IN-E-0023, SL2-R1-E-0023, SL2-R2-E-0023, SL2-A1-E-0023, SL2-L1-E-0023. Nemko Authorization No. : ELA 184 VCCI Certificate No. : R-2156, C-2329, T-219 TAF Accreditation No. : 1163 FCC Designation No. : TW1001 FCC Test Report Page 10 of 25

2 Conducted Disturbance Emission Test 2.1 Test Instruments Refer to Sec. 1.2 Test Instruments. 2.2 Test Arrangement and Procedure Table-top Equipment The EUT was placed on a non-conductive table which was 80 cm above the horizontal coupling plane. The rear of the EUT was 40 cm from the vertical coupling plane. The excess interface cables were folded at the cable center into a bundle no longer than 40 cm, so that the bundles were on the table. The EUT was connected to the main power through a L.I.S.N. This set up provided 50 ohm / 50 μh coupling impedance for the measuring equipment. All auxiliary equipment received power from a second L.I.S.N. The conducted emissions were measured between the Line Phase and the PE ground and between the Neutral Phase and the PE ground using an EMI Receiver. The values were recorded. FCC Test Report Page 11 of 25

2.3 Conducted Disturbance Limit CISPR 22 / FCC Part 15 Subpart B Frequency (MHz) Class A Class B Q.P. (Quasi-Peak) A.V. (Average) Q.P. (Quasi-Peak) A.V. (Average) 0.15 ~ 0.50 79 66 66 to 56 56 to 46 0.50 ~ 5.0 73 60 56 46 5.0 ~ 30 73 60 60 50 2.4 Test Result Compliance The final test data are shown on the following page(s). FCC Test Report Page 12 of 25

Conducted Disturbance Emission Test Data Test Date : 27-JUL-2010 Tested by : H.B.LIANG Temp. : 24 Humidity : 52% Power Mains : 120V/60Hz Power Line : Phase Frequency Measured Corr. Factor Total Limit (AV) Limit (QP) Margin Note (MHz) db (µv) db db (µv) db (µv) db (µv) db 0.191 12.600 0.100 12.700 53.990 63.990-41.290 P AV 0.191 15.200 0.100 15.300 53.990 63.990-48.690 P QP 0.333 17.600 0.100 17.700 49.370 59.370-41.670 P QP 0.333 10.100 0.100 10.200 49.370 59.370-39.170 P AV 1.482 1.600 0.170 1.770 46.000 56.000-54.230 P QP 1.482 0.300 0.170 0.470 46.000 56.000-45.530 P AV 2.988 0.900 0.250 1.150 46.000 56.000-44.850 P AV 2.988 5.200 0.250 5.450 46.000 56.000-50.550 P QP 4.170 0.200 0.310 0.510 46.000 56.000-45.490 P AV 4.170 1.800 0.310 2.110 46.000 56.000-53.890 P QP 13.311 18.100 0.750 18.850 50.000 60.000-41.150 P QP 13.311 2.900 0.750 3.650 50.000 60.000-46.350 P AV Peak, Average and QP signifies the measurement detector used for performing measurements. Negative number in the margin column indicates the amount (in db) that the recorded emission is below the limit. P denotes Phase, N denotes Neutral, AV denotes Average, QP denotes Quasi-Peak. Corr. Factor =Insertion loss(lisn Factor)+ Cable loss. Margin value = (Measured+ Corr. Factor) limit value. FCC Test Report Page 13 of 25

Conducted Disturbance Emission Test Data Test Date : 27-JUL-2010 Tested by : H.B.LIANG Temp. : 24 Humidity : 52% Power Mains : 120V/60Hz Power Line : Neutral Frequency Measured Corr. Factor Total Limit (AV) Limit (QP) Margin Note (MHz) db (µv) db db (µv) db (µv) db (µv) db 0.192 15.900 0.120 16.020 53.940 63.940-47.920 N QP 0.192 13.400 0.120 13.520 53.940 63.940-40.420 N AV 0.307 20.100 0.120 20.220 50.050 60.050-39.830 N QP 0.307 11.600 0.120 11.720 50.050 60.050-38.330 N AV 1.815 0.200 0.180 0.380 46.000 56.000-45.620 N AV 1.815 1.800 0.180 1.980 46.000 56.000-54.020 N QP 2.735 0.200 0.230 0.430 46.000 56.000-45.570 N AV 2.735 1.400 0.230 1.630 46.000 56.000-54.370 N QP 3.540 0.100 0.270 0.370 46.000 56.000-45.630 N AV 3.540 1.000 0.270 1.270 46.000 56.000-54.730 N QP 4.730 1.300 0.340 1.640 46.000 56.000-54.360 N QP 4.730 0.100 0.340 0.440 46.000 56.000-45.560 N AV Peak, Average and QP signifies the measurement detector used for performing measurements. Negative number in the margin column indicates the amount (in db) that the recorded emission is below the limit. P denotes Phase, N denotes Neutral, AV denotes Average, QP denotes Quasi-Peak. Corr. Factor =Insertion loss(lisn Factor)+ Cable loss. Margin value = (Measured+ Corr. Factor) limit value. FCC Test Report Page 14 of 25

3 Radiated Disturbance Emission Test 3.1 Test Instruments Refer to Sec. 1.2 Test Instruments. 3.2 Test Arrangement and Procedure 10 m 1~ 4 m EUT Pre-Amplifier Turn Table 80 cm Test Receiver Table-top Equipment The EUT was place on a non-conductive turntable which was 80 cm above the horizontal ground plane. The EUT was set 10 m away from the receiving antenna that was mounted on a non-conductive mast. Main cables draped to the ground plane and were routed to the mains power outlet. The mains power outlet was bonded to and did not protrude above the ground plane. The antenna was adjusted between 1 m and 4 m in height above the ground plane and the Antenna-to-EUT azimuth was also varied during the measurements to find the top 6 maximum meter readings within the frequency range limit as indicated in Sec 3.3. The radiated emissions were measured when the Antenna-to-EUT polarization was set horizontally and vertically. The values were recorded. FCC Test Report Page 15 of 25

3.3 Radiated Disturbance Limit FCC Part 15 Subpart B Class A (10m) Class B (3m) Frequency (MHz) Field Strength (µv/m) Quasi-Peak (dbµv/m) Field Strength (µv/m) Quasi-Peak (dbµv/m) 30 ~ 88 90 39.08 100 40.00 88 ~ 216 150 43.52 150 43.52 216 ~ 960 210 46.44 200 46.02 Above 960 300 49.54 500 53.98 Emission Level (dbµv/m)=20 Log Emission Level (µv/m) CISPR 22 Class A (10m) Class B (10m) Frequency (MHz) Quasi-Peak (dbµv/m) Quasi-Peak (dbµv/m) 30 ~ 230 40.0 30.0 230 ~ 1000 47.0 37.0 3.4 Test Result Compliance The final test data are shown on the following page(s). FCC Test Report Page 16 of 25

Radiated Disturbance Emission Test Data Test Date : 27-JUL-2010 Tested by : H.B.LIANG Temp. : 24 Humidity : 52% Description : N/A Negative number in the margin column indicates the amount (in db) that the recorded emission is Below the limit. V means in Vertical Antenna Polarization, H means in Horizontal, and QP means in Quasi-Peak. Corrected Factor =Insertion loss (Antenna Factor) + Cable loss. Corrected Reading = Reading + Corrected Factor. Margin limit = Correction Reading - limit value. FCC Test Report Page 17 of 25

4 Photographs of the Tests 4.1 Conducted Disturbance Emission Test Front View Rear View FCC Test Report Page 18 of 25

4.2 Radiated Disturbances Emission Test Front View Rear View FCC Test Report Page 19 of 25

5 Photographs of the EUT 1.Front View of the EUT 2.Rear View of the EUT FCC Test Report Page 20 of 25