Chassis, Power Supply

Chassis, Power Supply www.xigmatek.com BEYOND LIMITATION

YGGDRASIL the great ash tree of the universe. Created by Odin on the body of Ymir. The center of time and life at aesir s universe. Decent black interior and exterior in combination with unique and special features such as 10 pci slots (not only standard formfactor support but also for XXL gaming boards and Quad SLI) with powerful, extra strong and solid tool free holders. By 6 * 5.25 drive bays for ODD and 6 * 2.5 or 3,5 HDD s and SSD s we fulfill all demand of any end user s or enthusiats wishes. Supporting all your standard formfactor PSU s such as P/S2 ATX/EPS and an intake airflow with complete dust filters plus downward (also faceup) PSU installation and anti vibration. Nevertheless all users can define their own air cooling and control it with the pre installed knobs / fan controller on the top I/O. Different sizes of fans such as 220mm on the front, 140mm on the rear (but also 120mm is available), 220mm on the side (also 120 & 140mm are available *2), 120 / 140mm on the bottom with a tool free holder and a 220mm on the top (also 120/140mm available*2) are pre installed. With the feature of 240mm and 280mm water cooling support and the crazy and decent design it s being a must for enthusiats, PC beginners and extreme gamers. Get into the game

SUPER TOWER CHASSIS PURE BLACK EDITION ON CLASSIC CHASSIS YGGDRASIL 10 add-on card slots with tool-free clips for server and XL-ATX gaming board. Three big 22cm cooling fan pre-installed with low noise level. 5.25 tool-free holder on the both side for more fixed support. 2.5 /3.5 both available HDD tray with anti-vibration rubbers. USB, esata ports on the top panel with two fan speed controllers. Front 22cm fan LED is on/off switchable by user s demand. 340mm length available space for long graphic card. Enough space, cable holes and clips for cable management behind MB tray. MB tray window for CPU cooler backplate easy installation. Front opening 5.25 mesh cover for easy installation. Downside PSU installation with anti-vibration rubber and dust filter. Four water-pipe holes and inner 240/280mm radiator available. SPECIFICATION Power Supply Dimensions Drive Bay Expansion Slot Motherboard Support Cooling System I/O Panel Standard P/S2 ATX/EPS power supply unit 1. Intake airflow hole with dust filter. 2. Available for face upward and downward installation. 3. Within anti-vibration rubber. 247(W) x 591(H) x 557(D) mm (9.7*23.3*21.9 inches) 5.25 External device x 6 with tool-free holders. 2.5 /3.5 internal HDD x 6 by tray One external 3.5 to 5.25 adapter. 10 slots with tool-free holders. Extended-ATX, SSI CEB/EEB, XL-ATX, ATX, Micro ATX (with CPU cooler black plant installation window) Air-cooling Front Fan: Pre-installed 220mm orange fan with white LED x 1 Rear Fan: Pre-installed 140mm orange fan with white LED x 1 (120mm fan is available) Side Fan: Pre-installed 220mm black fan x 1 (120mm fan*4 or 200mm fan*1 is available) Bottom Fan: 120/140mm fan x 1 (optional, with 14cm tool-free holder) Top Fan: Pre-installed 220mm black fan x 1 (120/140mm fan x 2 are available) Fan Speed Control: Six fan speeds are adjustable synchronously by two knobs on top panel. Water-cooling Water pipe holes x 4 (with rubber cover) Available for 240mm or 280mm radiator (Available thickness is 48mm) Top Panel: Power On/Off switch, USB2.0 x 4, e-sata x 2, Audio in/out x 1 (HD Audio), two knobs of fan controller. Front fan LED on/off switch on the bottom of front panel. Dragon scale shape cooling vents 3

"UTGARD" - Beyond the world of mankind and Gods, home of Giants and Trolls. DOMINATED by LOKI, the God of Giants. Combining design and features such as coated SECC and steel mesh are spotlighting your chassis when your system is built. Furthermore this chassis is supplied with 2 x 120mm pre installed fans on the front and the rear, one top fan with the size of 170mm, but another 6 fans can be mounted in different areas for best possible airflow. 9 x 5.25" bays will be able to house all your optical drives, an external 3,5" device adapter and a 3 to 4 HDD Device. Tool free design and a "gorgeous" outlook are only a few points why this chassis is a "must" not only for enthusiast but also for pc beginners.

MID-TOWER CHASSIS PURE BLACK EDITION ON CLASSIC CHASSIS UTGARD All mesh design on front panel. Screw-less tooling for 5.25 bay installation. Screw-less tooling for expansion slot installation. Four 3.5 HDD in three 5.25 bay adapter. Preinstalled 170mm top black fan with white LED. Preinstalled 120mm front and rear orange fans with white LED. RPM speed control knobs for six fans. Back window for easy CPU cooler back plate. Cover-Mesh Back holes and clips for cable management. Anti-vibration rubber for PSU. Dust filter for PSU cooling fan. Tool-free holder for bottom 14cm fan. SPECIFICATION Power Supply Standard P/S2 ATX/EPS power supply unit 1. Intake airflow hole with dust filter. 2. Available for face upward and downward installation. 3. Within anti-vibration rubber. Dimensions Utgard-Original / Window: 207(W) x 515(H) x 490(D) mm (8.1*20.3*19.3 inches) Utgard-Mesh: 222(W) x 515(H) x 490(D) mm (8.7*20.3*19.3 inches) Drive Bay 5.25 External x 9 with tool-free holders. (Including one external 3.5 device adapter and one 4 in 3 3.5 HDD adapter.) Expansion Slot 7 slots (tool-free) Motherboard Support ATX, Micro ATX (with easy black plant installation window) Air-cooling Front Fan: Pre-installed 120mm white LED with orange blades x 1 (80/90/140mm fan is available) Rear Fan: Pre-installed 120mm white LED with orange blades x 1 (80/90mm fan is available) Cover-Window Cover-Original Cooling System Side Fan: Utgard-Original: 80/90/120/140mm fan *1 (optional) 120/140mm fan *1 (optional) Utgard-Mesh: 120mm fan *4 (optional) 200/220mm fan *1 (optional) Utgard-Window: Not available. Bottom Fan: 120/140mm fan x 1 (optional, with 14cm tool-free holder) Top Fan: Pre-installed 170mm white LED with orange blades x 1 (120/140mm fan x 2 are available) Fan Speed Control: Six fan speeds are adjustable synchronously by two knobs on top panel. Water-cooling Water pipe holes x 4 (with rubber cover) Available for 12cm*2 or 14cm*2 radiator (thickness under 46mm) I/O Panel Top Panel: Power On/Off switch, USB2.0 x 4, e-sata x 2, Audio in/out x 1 (HD Audio), two knobs of fan controller. 5

Midgard - home of mankind and protected by Thor, God of thunder, and his hammer. Signalizing the strength of diviness and mercy, but at the same time proprietaring the hardware you built in. Combined design and features such as black coated SECC and steel mesh are spotlighting your chassis when your system is built. Furthermore this chassis is supplied with 2 x 120mm pre installed fans (orange blade and black, transparent housings), but another 5 fans can be mounted in different areas for best possible airflow. 5 x 5.25" bays will be able to house all your optical drives, but also 5 trays for your 3.5" and 2.5" HDDs are available so you can feel free by "DIY". Tool free design and a "gorgeous" outlook are only a few points why this chassis is a "must" not only for enthusiast but also for pc beginners.

MID-TOWER CHASSIS PURE BLACK EDITION ON CLASSIC CHASSIS MIDGARD 5.25" screw-less device holder on both side. HDD tray with anti-vibration rubber and suitable for 2.5" and 3.5" HDD. Add-on card screw-less clips. Window for CPU cooler backplate easy installation. Three fans synchronous RPM controller. PSU location on the bottom with anti-vibration rubber. PSU could be installed downward and upward. Removable intake airflow dust filter for PSU. MIDGARD-W Upper fan space and preinstalled rear 12cm fan. Removable intake airflow dust filter for front fan. Bottom fan preinstalled frame. Four water pipe holes for future liquid cooling system. SPECIFICATION Power Supply Dimensions Drive Bay Expansion Slot Motherboard Support Cooling System I/O Panel Standard P/S2 ATX/EPS power supply unit 1. Intake airflow hole with dust filter. 2. Available for face upward and downward installation. 3. Within anti-vibration rubber. Main Unit: 206 x 510 x 477 mm / 8.1 x 20.1 x 18.8 inches Box: 258 x 560 x 583 mm / 10.1 x 22.0 x 23.0 inches 5.25" External x 5 (One bay with 5.25" to 3.5" adapter, tool-free) 3.5" Internal x 5 (Tool-free) 7 slots (tool-free) Available for max. 295mm length VGA card ATX, Micro ATX (with easy back plant installation window) Air-cooling Front Fan: Rear Fan: 120mm white LED with orange blades x 1 (Preinstalled) (80/90/140mm fan is available) 120mm white LED with orange blades x 1 (Preinstalled) (80/90 fan is available) 80/90/120/140mm fan x 1 (optional) 120/140mm fan x 1 (optional) Side Fan: Bottom Fan: 120/140mm fan x 1 (optional) Top Fan: 120/140mm fan x 2(optional) Fan Speed Control: Three fan speeds are adjustable synchronously by one knob on back bracket. Water-cooling Water pipe holes x 4 (with rubber cover) Top Panel: Power On/Off switch and reset button Front Panel: USB2.0 x 2, e-sata x 1, Audio out x 1, Microphone x 1 MIDGARD Optional Side Window Cover 7

MIDGARD

MID-TOWER CHASSIS PURE WHITE EDITION ON CLASSIC CHASSIS WHITE KNIGHT Screw-less tooling for 5.25 bay installation. HDD tray availble for 2.5 /3.5 with anti-vibration rubber. Screw-less tooling for expansion slot installation. Back window for easy CPU cooler back plate. RPM speed control knob for three fans. Anti-vibration rubber for PSU. 5.25 adapter for external 3.5 device. Dust filter for PSU cooling fan. Upper fan space and preinstalled rear 12cm fan. Preinstalled 120mm front and rear black fans with white LED. Tool-free holder for bottom 14cm fan. Back holes and clips for cable management. SPECIFICATION Power Supply Dimensions Drive Bay Expansion Slot Motherboard Support Cooling System Standard P/S2 ATX/EPS power supply unit 1. Intake airflow hole with dust filter. 2. Available for face upward and downward installation. 3. Within anti-vibration rubber. 206(W) x 510(D) x 477(H) mm 5.25" External x 5 (One bay with 5.25" to 3.5" adapter, tool-free) 3.5" Internal x 5 (Tool-free) 7 slots (tool-free) ATX, Micro ATX (with easy back plant installation window) Air-cooling Front Fan: Rear Fan: 120mm white LED with orange blades x 1 (Preinstalled) (80/90/140mm fan is available) 120mm white LED with orange blades x 1 (Preinstalled) (80/90 fan is available) 80/90/120/140mm fan x 1 (optional) Side Fan: Bottom Fan: 120/140mm fan x 1 (optional) Top Fan: 120/140mm fan x 2 (optional) Fan Speed Control: Three fan speeds are adjustable synchronously by one knob on back bracket. Water-cooling Water pipe holes x 4 (with rubber cover) I/O Panel Top Panel: Power On/Off switch and reset button Front Panel: USB2.0 x 2, e-sata x 1, Audio out x 1, Microphone x 1 9

ASGARD ASGARD II - Orange ASGARD II - Black ASGARD II - Silver "Asgard"-The Property of Æsir and castle of Odin. As the country of Gods, the inviolable Asgard is the world s first black coating entry-level chassis - milestone. Furthermore this chassis is supplied with 1 x 120mm preinstalled black fan, and 3 more fans can be mounted in different areas for best possible airflow. 4 x 5.25 bays will be able to house all your optical drives, but also 5 trays for your 3.5 HDDs are available so you can feel free by "DIY". Tool free design and a "gorgeous" outlook are only a few points why this chassis is a "must" not only for enthusiast but also for pc beginners. 80/90/120mm rear fan space. Tool-less holders for 3.5 and 5.25 devices. Dust filter behind front panel. SPECIFICATION Power Supply Standard P/2(ATX) or EPS Dimensions 185(W) x 475(D) x 408(H) mm, 0.6mm thickness SGCC. Drive Bay 5.25 External x 4 (Tool-free) 3.5 External x 1 (Tool-free) 3.5 Internal x 5 (Tool-free) Tool-less clips for add-on cards. Preinstalled front 120mm fan. Back hole on MB tray for CPU cooler backplate easy installation. Expansion Slot 7 slots (tool-free) Available for max. 285mm length VGA card Motherboard Support ATX (12 x 9.6 ), Micro ATX (9.6 x 9.6 ) Cooling System Front Fan: Preinstalled 120mm black fan x 1 (80/90mm fan is available) Rear Fan: 80/90/120mm x 1 fan is available. I/O Panel Side Fan: 80/90/120mm x 2 fans are available. Front Panel: USB2.0 x 2, HD Audio in/out x 1 Holes and clips for cable management. Upper power supply allocation. Left side cover with two 80/90/120mm fan screw holes. 10 PURE BLACK EDITION ON CLASSIC CHASSIS ENTRY LEVEL MID-TOWER CHASSIS

CUBIC MINI-ITX CHASSIS PURE BLACK EDITION ON CLASSIC CHASSIS "Vingólf" the hall of Nordic goddesses and somewhere righteous men and those slain in battle go after death. Cubic chassis housing with decent black interior and aluminum meshed panel is suitable with living room HTPC and bookroom desktop. Vingólf bases on Mini-ITX form factor with standard ATX power supply and also standard half-height 5.25 ODD drive available easier in the retail market to install and replace. Maximum both two internal 2.5 and 3.5 HDDs for bigger data storage and free height for Xigmatek D982 Durin low profile CPU cooler. Front 14cm big intake fan and 8cm side fan are available for system cooling. Vingólf is your best small ITX platform choice with biggest room for DIY. VINGOLF 14cm front fan and 8cm side fan for optimized thermal solution. 65mm free height for retail Full size 5.25 space for low profile heat-pipe cooler. ODD has double speed of Xigmatek D982 recommended. slim type. Standard ATX power supply is easier availability in the retail market. Maximum four HDD space for more data storage. 3.5 HDD tray with anti-vibration rubber. SPECIFICATION Power Supply Dimensions Drive Bay Expansion Slot Motherboard Support Cooling System Standard P/2(ATX) or EPS 211(W) x 277(H) x 215(D) mm (8.3*10.9*8.5 inches) 5.25 External device x 1 2.5 /3.5 (common) internal HDD x 2 2.5 (only) internal HDD x 2 1 slot ITX Front Fan: 140mm (80/90mm fan is available) Side Fan: 80mm (occupied one 2.5 /3.5 (common) internal HDD space) I/O Panel Power On/Off switch, USB2.0 x 2, Audio in/out x 1 (HD Audio) 11

MONO COOL Total 10W DC output. Design for 12V DC fan. Suitable for standard add-on card bracket. One Molex 4pin power cable for power supply. Not enough fan speed to cool your PC? Too noisy by your fans? Hard to make a decision between cooling and noise? Mono-Cool is the easiest device to let you adjust fan speed. Mono-Cool fan speed controller could be installed easily on your PC backside add-on card slot and one knob can control three fans RPM synchronously. Mono-Cool is the most suitable fan speed adjustment solution for beginner. SPECIFICATION Dimension 120(W) x 23(H) x 30(D) mm Voltage Rating 6-12V Fan DC Output 10W Bearing Type Long-life bearing 300mm Molex 4Pin cable Cables Three 300mm 3pin fan cables 4 in 3 HDD cage Occupied three 5.25 external drive space and four internal 3.5 HDD available. Anti-vibration rubber for 3.5 HDD. 12cm front white LED fan with orange blades. 2.5" HDD adapter Occupied one 3.5 internal drive space and two internal 2.5 HDD available. Anti-vibration rubber for 2.5 HDD. Window Side Panel Available for Midgard and Utgard chassis. Xigmatek X type acrylic window. 480(W)*425(H)mm Mesh side Panel Available for Midgard and Utgard chassis. Available for 12cm fan*4 or 20/22cm fan*1 Xigmatek X type mesh window. 4 12

MAINSTREAM CLASS POWER SUPPLY NRP-MC702 / 802/ 1002 Over 85% High Efficiency Power Supply NRP-MC702 Fan Speed & Noise Curve AC INPUT 115V~240V 8A/4A 47Hz~63Hz Output Voltage +3.3V +5V +12V -12V +5V SB Max Output Current 30A 30A 56A 0.6A 3.0A Max Combined Noise 30 dba 25 dba 150W 672W 7.2W 15W 700W 25.5 dba 1340 RPM 28.3 dba 1570 RPM 20 dba 15 dba 17 dba 690 RPM 18.1 dba 790 RPM 20.8 dba 1080 RPM 20% 40% 60% 80% 100% Loading NRP-MC802 Fan Speed & Noise Curve AC INPUT 115V~240V 9A/5A 47Hz~63Hz Over 88% efficiency at 230V and 80Plus Bronze certified at 115V. Active PFC rate up to 0.99 for universal 100~240Vac. Multiple 12V rail design meets ATX12V v2.3 standard. 14cm cooling fan and smart fan speed control for low noise level. Real output wattage and 130% peak load is available. Eco-friendly package with recycled material for Earth loving. High-end graphic card support and SLI, Crossfire ready. Output Voltage +3.3V +5V +12V -12V +5V SB Max Output Current 30A 30A 64A 0.6A 3.0A Max Combined 160W 768W 7.2W 15W 800W Noise 30 dba 29.4 dba 1680 RPM 25 dba 20 dba 17.2 dba 720 RPM 18.3 dba 830 RPM 21.5 dba 1120 RPM 27.1 dba 1445 RPM 14cm Transparent Black Cooling Fan Solid state capacitor for 12V output and DC to DC circuit board. Cable Management 15 dba 20% 40% 60% 80% 100% Loading NRP-MC1002 Fan Speed & Noise Curve AC INPUT 115V~240V 15A/10A 47Hz~63Hz Output Voltage +3.3V +5V +12V -12V +5V SB High quality Japanese capacitor on primary side. Mesh Sleeves PCI-E 6Pin Connector Max Output Current 30A 30A 80A 0.8A 4.0A Max Combined 170W 960W 9.6W 20W 1000W Noise 30 dba 28.2 dba 1550 RPM 30.8 dba 1750 RPM 25 dba 12V 8Pin Connector PCI-E 6+2Pin Connector Molex 4Pin 22.7 dba 1175 RPM 20 dba 15 dba 17.5 dba 750 RPM 18.8 dba 970 RPM 20% 40% 60% 80% 100% Loading 230VAC EFFICIENCY UP TO 88% DC12V Solid State Capacitors SINGLE 12V RAIL EuP Compliant 13

POPULAR CLASS POWER SUPPLY Over 85% High Efficiency Power Supply AC INPUT 100V~240V 10A/5A 47Hz~63Hz DC OUTPUT +3.3V +5V +12V 1 +12V 2-12V +5V SB NRP-PC602 / 702 85%+ efficiency model with 80Plus Bronze certified. Active PFC rate up to 0.99 for universal 100~240Vac. Multiple 12V rail design meets ATX12V v2.3 standard. 14cm cooling fan and smart fan speed control for low noise level. Real output wattage and 130% peak load is available. Eco-friendly package with recycled material for Earth loving. High-end graphic card support and SLI, Crossfire ready. Max Output Current Max Combined Noise 30 dba 25 dba 20 dba 18 dba 800 RPM 15A 24A 30A 22A 0.3A 2.5A 130W 504W (42A) 600W 3.6W 12.5W 19.5 dba 1100 RPM 23 dba 1330 RPM 26 dba 1550 RPM 29 dba 1750 RPM 15 dba 20% 40% 60% 80% 100% Loading NRP-PC702 Fan Speed & Noise Curve AC INPUT 100V~240V 10A/5A 47Hz~63Hz DC OUTPUT +3.3V +5V +12V 1 +12V 2-12V +5V SB 14cm Transparent Black Cooling Fan Smart thermal fan control Japanese Main Capacitor Max Output Current Max Combined 20A 24A 30A 30A 0.3A 2.5A 150W 648W (54A) 700W 3.6W 12.5W Noise 30 dba 27 dba 1600 RPM 29.5 dba 1800 RPM 25 dba 23.5 dba 1380 RPM Mesh Sleeves Honey Comb Structure PCI-E 6Pin Connector 20 dba 18.5 dba 820 RPM 19.5 dba 1100 RPM 15 dba 20% 40% 60% 80% 100% Loading ATX 12V 85% Ver. 2.3 4+4Pin Connector PCI-E 6+2Pin Connector Molex 4Pin Connector 14 12V RAIL x 2 14cm COOLING FAN UNIVERSAL AC INPUT ECO FRIENDLY Japanese Main Cap.

NRP-PC402 Fan Speed & Noise Curve AC INPUT 100V~240V 8A/5A 47Hz~63Hz NRP-PC402 / 502 DC OUTPUT +3.3V +5V +12V 1 +12V 2-12V +5V SB Max Output Current 24A 15A 20A 20A 0.3A 2.5A Max Combined 120W 384W (32A) 3.6W 12.5W 400W Noise 30 dba 25 dba 20 dba 15 dba 17 dba 750 RPM 18.5 dba 1050 RPM 21 dba 1300 RPM 27 dba 1600 RPM 24 dba 1400 RPM 20% 40% 60% 80% 100% Loading NRP-PC502 Fan Speed & Noise Curve AC INPUT 100V~240V 8A/5A 47Hz~63Hz DC OUTPUT +3.3V +5V +12V 1 +12V 2-12V +5V SB Max Output Current 24A 15A 20A 20A 0.3A 2.5A Max Combined Noise 30 dba 25 dba 20 dba 17.5 dba 780 RPM 19 dba 1100 RPM 120W 444W (37A) 3.6W 12.5W 500W 22 dba 1350 RPM 28.5 dba 1700 RPM 25 dba 1450 RPM 85%+ efficiency model with 80Plus Bronze certified. Active PFC rate up to 0.99 for universal 100~240Vac. Multiple 12V rail design meets ATX12V v2.3 standard. 14cm cooling fan and smart fan speed control for low noise level. Real output wattage and 130% peak load is available. Eco-friendly package with recycled material for Earth loving. High-end graphic card support. 85% ATX 12V Ver. 2.3 15 dba 20% 40% 60% 80% 100% Loading 12V RAIL x 2 14cm COOLING FAN UNIVERSAL AC INPUT ECO FRIENDLY NRP-VC403 / 503 Compliant with ATX12V Ver2.2 standard. Black coating chassis. Upper 12cm cooling fan. Smart fan speed control by thermal. Molex connector with easy-swap design. SATA and PCI-Express connectors available. 20+4pin cable with mesh. NRP-VC403 AC INPUT 230V 6A 60/50Hz DC OUTPUT +3.3V +5V +12V 1 +12V 2-12V +5V SB Max Output Current 20A 14A 14A 13A 0.3A 2.5A Combined Output 130W 168W 156W 385W 400W 3.6W 12.5W NRP-VC503 AC INPUT 230V 6A 60/50Hz DC OUTPUT +3.3V +5V +12V 1 +12V 2-12V +5V SB Max Output Current 22A 16A 15A 16A 0.8A 2.5A Combined Output 130W 180W 192W 480W 500W 9.6W 12.5W 15