KAIST SSL VPN USER MANUAL 2014. 5
목차 제 1장 DESKTOP USER 1. Microsoft Windows 2. MACKINTOSH MAC 제 2장 MOBILE USER (p83) 1. ANDROID PHONE 2. IPHONE 1.2.1 MAC 10.7 USER Above p13 - New-install p14 - Re-install p31 - Deleing the NC Client 제 3장 Supported PLATFORM (p96) 1. MOBILE 2. DESKTOP - Using the Trash p42 - Using the NC Client(Recommend) p48 1.2.2 MAC 10.6 USER - New-install p55 3. Linux X-Windows (p68) 2
제 1장 DESKTOP USER MICROSOFT WINDOWS 3
1. MICROSOFT WINDOWS (VPN LOG-IN) 1. Enter VPN address into Web browser(ie) VPN address : https://kvpn.kaist.ac.kr Click 4
1. MICROSOFT WINDOWS (VPN LOG-IN) 2. Enter User ID and PASSWORD -. Enter registered ID/PASSWORD to access SSL VPN 사용자 ID/PW를 입력 5
1. MICROSOFT WINDOWS (VPN LOG-IN) 3. NC Client is installed Automatically -. NC Client is Downloaded and install via browser automatically 6
1. MICROSOFT WINDOWS (VPN LOG-IN) 4. After login completed, user s bookmark is displayed in the screen 7
1. MICROSOFT WINDOWS (VPN LOG-IN) 5. Verified Users can confirm themselves bookmark via screen If the SSL VPN is connected successfully, Juniper Network Connect icon ins generated in the bottom right corner tray of the screen 8
1. MICROSOFT WINDOWS (VPN LOG-IN) 6. Connected in SSL VPN user can access to internal system with 2 types 9
1. MICROSOFT WINDOWS (VPN LOG-IN) 6. Connected in SSL VPN user can access to internal system with 2 types 사용자가 주소 창에 직접 주소 입력 10
1. MICROSOFT WINDOWS (VPN LOG-IN) 7. You can add frequently access internal site bookmark in the Web browser + Click 11
1. MICROSOFT WINDOWS (VPN LOG-OUT) 8. LOG-OUT Click the log out in Tray Icon Click the log out to right menu 12
제 1장 DESKTOP USER MACKINTOSH MAC (10.7 ABOVE) NEW-INSTALL 13
1.2.1 MACKINTOSH 10. 7 USER ABOVE(VPN LOG-IN) 1. Enter the VPN address to Safari browser VPN address : https://kvpn.kaist.ac.kr Click 14
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 2. Enter User ID and PASSWORD -. Enter registered ID/PASSWORD to access SSL VPN 사용자 ID/PW를 입력 15
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 3. NC Client is installed Automatically -. Select the continue button -. Select the run button about NCApp -. Select the Always button 16
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 4. NC Client is installed Automatically -. After select the Always button,the Desktop displayed same logs -. You need the unsafe mode about safari browser 17
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 5. NC Client is installed Automatically -. Click the Preference in Safari to upper menu Click 18
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 5. NC Client is installed Automatically -. Click the Web site setting Management in Security Click 19
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 5. NC Client is installed Automatically -. You can check the Kvpn.kaist.ac.kr in JAVA menu -. Click the permit button Click 20
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 5. NC Client is installed Automatically -. After the permit button, Click the Run in unsafe mode Click 21
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 5. NC Client is installed Automatically -. After the change in Safari, Click the start menu again Click 22
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 6. NC Client is installed Automatically -. Select the continue button -. Select the run button about NCApp -. Select the Always button 23
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 7. NC Client is installed Automatically, made the NC Icon -. You could check the IP address, Hours of use, TX and Rx Packet -. Make the Tray Icon, Keep the NC connection without Web Page 24
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 8. Verified Users can confirm themselves bookmark via screen -. You Can check the bookmark page 25
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 9. Connected in SSL VPN user can access to internal system with 2 types 26
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 9. Connected in SSL VPN user can access to internal system with 2 types 27
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 10. You can add frequently access internal site bookmark in the Web browser + Click 28
1.2.1 MACKINTOSH 10. 7 USER ABOVE (VPN LOG-IN) 11. LOG-OUT -. Click the log out of right memu -. Click the Quit in Tray Icon 29
제 1장 DESKTOP USER MACKINTOSH MAC (10.7 ABOVE) RE-INSTALL 30
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 1. Yon should check the NETWORK CONNECT in Mac OS -. Click the Application in Go Menu 1 2 Click 31
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 2. Check the Network Connect In Application -. If you check the Network Connect, You should double click about NC Icon Click 32
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 3. After the double click NC Icon, Open the Network Connect 33
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 4.Click the Network Connect Menu and Click Uninstall Network Connect 1 2 34
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 5. The Mac OS display the Uninstall Network Connect Menu -. Click Uninstall and Quit button 35
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 6. Open the Safari browser in Mac OS 36
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 7. Enter VPN address into Safari blowser VPN address : https://kvpn.kaist.ac.kr 37
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 8. Enter User ID and PASSWORD -. Enter registered ID/PASSWORD to access SSL VPN 사용자 ID/PW를 입력 38
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 9. NC Client is installed Automatically -. Select the continue button -. Select the run button about NCApp -. Select the Always button 39
1.2.1 MACKINTOSH 10. 7 USER ABOVE (RE-INSTALL) 10. Check the Network Connect 40
제 1장 DESKTOP USER MACKINTOSH MAC (10.7 ABOVE) 1. DELETE THE NC USING THE TRASH 41
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 1. Yon should check the NETWORK CONNECT in Mac OS -. Click the Application in Go Menu -. Check the Network Connect Icon 1 2 42
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 2. Delete the Network connect into Trash 43
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 3. Deleting the Network connect Icon -. Insert the Name and Password 1 2 Click 44
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 4. Delete the Juniper Program in Mac OS Desktop -. Delete the net.juniper.dscoreservice.framework file in PATH C: Mac OS Hard Disk PATH : C:Library/Framework/net.juniper.DSCoreService.framework 2 1 Click Click delete 45
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 5. Delete the Juniper Program in Mac OS Desktop -. Delete the net.juniper.dscoreservice.framework Click 46
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 6. You should check the Deleted file -. You checked the net.juniper.dscoreservice.framework file check 47
제 1장 DESKTOP USER MACKINTOSH MAC (10.7 ABOVE RECOMMAND) 2. DELETE THE NC USING THE NC CLIENT 48
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 1. Yon should check the NETWORK CONNECT in Mac OS -. Click the Application in Go Menu 1 2 Click 49
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 2. Check the Network Connect In Application -. If you check the Network Connect, You should double click about NC Icon 50
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 3. After the double click NC Icon, Open the Network Connect 51
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 4. Click the Network Connect Menu and Click Uninstall Network Connect 1 2 52
1.2.1 MACKINTOSH 10. 7 USER ABOVE (NC-DELETE) 5. The Mac OS display the Uninstall Network Connect Menu -. Click Uninstall and Quit button 53
제 1장 DESKTOP USER MACKINTOSH MAC (10.6 USER) NEW-INSTALL 54
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 1. Open the safari browser in Mac OS Desktop VPN address : https://kvpn.kaist.ac.kr 55
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 2. Enter the VPN address to Safari browser VPN address : https://kvpn.kaist.ac.kr 56
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 3. Enter User ID and PASSWORD -. Enter registered ID/PASSWORD to access SSL VPN 사용자 ID/PW를 입력 57
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 4. NC Client is installed Automatically, -. Click the Permit about JAVA APPLET Click 58
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 5. NC Client is installed Automatically -. Click the Trust about Web Site Certification of the Kvpn.kaist.ac.kr Click 59
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 6. NC Client is installed Automatically -. Select the Always button Click 60
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 7. NC Client is installed Automatically, -. You checked the NC Client 61
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 8. NC Client is installed Automatically, made the NC Icon -. You could check the IP address, Hours of use, TX and Rx Packet -. Make the Tray Icon, Keep the NC connection without Web Page 62
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 9. Verified Users can confirm themselves bookmark via screen -. You Can check the bookmark page 63
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 10. Connected in SSL VPN user can access to internal system with 2 types Click the Bookmark about Internal system 64
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 11. Connected in SSL VPN user can access to internal system with 2 types 65
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 12. You can add frequently access internal site bookmark in the Web browser + Click 66
1.2.2 MACKINTOSH 10. 6 USER (VPN LOG-IN) 13. LOG-OUT -. Click the Log out with upper memu -. Tray Icon을 quit 67
제 1장 DESKTOP USER LINUX X-WINDOWS 68
3. LINUX X-WINDOWS (PREVIOUS WORK) 1. JAVA DownLoad (difference version) -. Download: http://java.sun.com에서 jre-6u33-linux-i586-rpm.bin 69
3. LINUX X-WINDOWS (PREVIOUS WORK) 2. JAVA install # chmod 700 jre-6u33-linux-i586-rpm.bin #./jre-6u33-linux-i586-rpm.bin 70
3. LINUX X-WINDOWS (PREVIOUS WORK) 3. Setup JAVA environment variables # add.bash_profile export JAVA_HOME=/usr/java/jre1.6.0_33 export PATH=/usr/java/jre1.6.0_33/bin:$PATH:$HOME/bin 71
3. LINUX X-WINDOWS (PREVIOUS WORK) 4. Link module at Firefox # cd /usr/lib/mozilla/plugins # ln -s /usr/java/jre1.6.0_33/lib/i386/libnpjp2.so 72
3. LINUX X-WINDOWS (PREVIOUS WORK) 5. To Download and Installation NC Clinet -. Download Linux SSL VPN at Login Page (ncui-7.1r10.i386.rpm) -. Install NC Client (ncui-7.1r10.i386.rpm) 73
3. LINUX X-WINDOWS (VPN LOG-IN) 6. Enter VPN address into Linux FireFox VPN address : https://kvpn.kaist.ac.kr 74
3. LINUX X-WINDOWS (VPN LOG-IN) 7. Enter User ID and PASSWORD -. Enter registered ID/PASSWORD to access SSL VPN 사용자 ID/PW를 입력 75
3. LINUX X-WINDOWS (VPN LOG-IN) 8. NC Client is installed Automatically -. Click Web site Certification about kvpn.kaist.ac.kr 76
3. LINUX X-WINDOWS (VPN LOG-IN) 9. Installing connect SSL VPN 77
3. LINUX X-WINDOWS (VPN LOG-IN) 10. Verified Users can confirm themselves bookmark via screen -. You Can check the bookmark page You can check the VPN status through NC Client 78
3. LINUX X-WINDOWS (VPN LOG-IN) 11. You can add frequently access internal site bookmark in the Web browser, - You can add the Bookmark + Click 79
3. LINUX X-WINDOWS (VPN LOG-IN) 12. Connected in SSL VPN user can access to internal system with 2 types Click the Bookmark about Internal system 80
3. LINUX X-WINDOWS (VPN LOG-IN) 12. Connected in SSL VPN user can access to internal system with 2 types 81
3. LINUX X-WINDOWS (VPN LOG-OUT) 13. LOG-OUT Click the log out Click the log out of right menu 82
제 2장 MOBILE USER ANDROID 83
1. ANDROID 1. Search Junos Pulse at Play store and Install Junos Pulse : Android Version 4.0(ICS), Use VPN module in Mobile Junos Pulse For Samsung : Use Samsung Mobile( Calaxy Series, Calaxy Tab10.1 etc) Junos Pulse for Galaxy Tab 7.0 : Use Samsung Calaxy Tab 7.0 2. Creat icon as follow 3. Run Application 4. Verify license agreement and scroll down the bottom screen 84
1. ANDROID 5. Press Button Accept after read the Agreement 6. Press Connections 7. Connect session KAIST VPN, Press button Create connection hostname : KAIST SSL address : https://kvpn.kaist.ac.kr 8. Click connect, connect KAIST VPN 85
1. ANDROID 9. Check I trust this application and Click OK Button 10. Ignore security alert window, click Accept 11. Enter ID/PW and Click Sign in button 12. If you are connected successfully to server m create lock icon 86
1. ANDROID 13. After click home button and down the window, run internet browser, And you can access site that want to connect 14. To terminate connect SSL, after click in the top lock icon and click disconnect 15. To reconnect SSL VPN, run Junos Pulse application 87
제 2장 MOBILE USER IPHONE 88
2. IPHONE 1. Search Junos Pulse at App store and install 2. Install Junos Pulse 3. Run Application 4. Verify license Agreement and Click Accept 89
2. IPHONE 5. Enable Junos Pulse 6. Select Configuration for add new VPN connection 7. After select Add new component, add KAIST VPN component 8. Name : KAIST SSL // URL : https://kvpn.kaist.ac.kr Enter user id and save 90
2. IPHONE 9. Check added KAIST VPN component and run 10. Select Connect 11. Ignore certificate fail message, select Accept 12. Enter ID/PW and click the sign in button 91
2. IPHONE 13. If VPN is connected successfully, create VPN tray icon in the top screen 14. Click link and run service 15. You can access to portal site using bookmark 16. Run Safari(Internet Browser) in mobile phone, you can access http://ict.kaist.ac.kr 92
2. IPHONE 17. To disconnect Junos Pulse, Press Disconnect button 18. To reconnect SSL VPN, run Junos Pulse application 93
제 2장 SUPPORTED PLATFORM MOBILE 94
1. SUPPORTED MOBILE Mobile OS Qualified Version Compatible 비고 2.3 Android IOS (IPhone, IPad and IPod) 3.1 3.2 4.0, 4.1 & 4.2 5.1.1 6.0 2.2 5.0.1 Window * 6.5 6.1 and 6.0 * Additional Devices are doing test. 95
제 3장 SUPPORTED PLATFORM DESKTOP 96
1. DESKTOP (QUALIFIED PLATFORMS) 제조사 운영체제 브라우 저 Windows Window 7 SP1 Enterprise, 64 bit Internet Explorer 10 Window 8 Enterprise, 64bit,Internet Explorer 9, Firefox 10 -ESR Mac OS X 10.7.4 64 bit Mac Safari 5.1, 6 Oracle JRE 7 Mac OS X 10.8, 64 bit Linux Ubuntu 12.04 LTS Firefox 10-ESR, Oracle JRE 7 OpenSUSE 12.1 Solaris Solaris 10, 32 bit Mozilla 2.0 and above Qualified Platforms : successfully tested platform list by juniper QA team 97
2. DESKTOP (COMPATIBLE PLATFORMS) 제조사 운영체제 브라우 저 Window 8.1, 32 bit or 64 bit platforms Windows Window 8, 32bit or 64 bit platforms Window 8, Enterprise, 32bit Window 7 on 32 bit or 64 bit platforms Window 7 SP1 Enterprise, 32 bit Window Vista, 32 bit or 64 bit platforms Window XP with SP3, 32bit Internet Explorer 11, Internet Explorer 10, Internet Explorer 9.0, Internet Explorer 8.0, Internet Explorer 7.0, Firefox 3.0 and above including FF 10, Oracle JRE 6 and above Mac Linux Mac OS X 10.9 Max OS X 10.7 and 10.8 32 bit Max OS X 10.6 32 bit and 64 bit OpenSUSE 10.x and 11.x Ubuntu 9.10, 10.x and 11.x Red Hat Enterprise Linux 5 Safari 7.0, Safari 6.0, Safari 5.1, Safari 5.0 JRE 6 and above Firefox 3.0 and above Oracle JRE 6 and above Solaris* Solaris 10, 32bit Mozilla 2.0 and above Compatible Platforms : Above platform release list isn t tested by Juniper QA Team. But it is supportable basis on prior test platform 98