Door Gear - Mild Steel Product Catalogue www.bloxwichtc.co.uk Version: 02 / 2016 1
Contents Welcome To the latest Bloxwich Truck & Container Ltd product catalogue, as part of the Bloxwich Group of companies we are global manufacturers and distributors to the Truck and Container industries and many more. We hope you find our new catalogue useful but please let us know if you don t as we are now 100 years old and are still very happy to be: General Information p 4-5 Door Gear - Mild Steel p 6-37 Door Gear - Stainless Steel p 38-61 Hinges & Brackets p 62-89 Hooks / Retainers / Catches p 90-97 Lashing Rings p 98-127 ISO Container p 128-133 Spares / Misc p 134-143 From everyone in the Bloxwich Truck & Container Ltd team. 2 3
Quality Bloxwich Transport & Container Products Ltd is committed to a policy of total quality in all aspects of its operations. Its aim is to give the best possible service to its customers with finished products that comply with agreed specifications and contract requirements. The company operates a zero defect policy through defect prevention and pursues a programme of continuous improvement in products, processes and services in order to achieve and anticipate customer s needs. In order to achieve this central objective, Bloxwich Transport & Container Products Ltd, will operate a quality control system which exceeds the requirements of ISO 9002 as well as achieving greater customer quality standards. The dimensions stated within this catalogue are for general guidance only. If precise dimensions are required it will be necessary to obtain an up to date engineering print which will be issued on request. All products are supplied by Bloxwich Transport & Container Products Ltd on the terms of its written conditions of sale which appear on the back of its quotations and invoices. Self Colour Parts supplied in self colour are as per the original material and they are usually supplied in such a condition for welding in place. Suitable corrosion protection methods are required. Zinc Plate Finish Our electro zinc plate finish is to BS.1706:Fe/Zn 8 c1a and is intended to protect during normal storage and transit. It is not suitable as an in service protection. We recommend that all our zinc plated products undergo further treatment (painting etc.) to provide the required level of corrosion resistance. Should you wish to paint any galvanised products please contact your paint supplier to ensure that the correct surface preparation and paint products are used. Stainless Steel Stainless steel used is AISI 304. To further enhance our stainless steel products we barrel polish all brackets, castings and forgings etc. Pickling and passivating is also carried out to ensure our stainless components not only look good but have the best resistance to corrosion possible. Care should be taken during further assembly or manufacture in order not to contaminate stainless products with mild steel particles e.g. no grinding or welding nearby. Ideally also avoid the use of any tools that may have been used on mild steel parts. Should you wish to paint any stainless steel products please contact your paint supplier to ensure that the correct surface preparation and paint products are used. Fastening Where fasteners are used we recommend the use of the same material/finish as the Bloxwich components or assemblies and if applicable the same painting etc. to give the best corrosion protection. All fasteners should be suitable for the intended application and should be torqued to the manufacturers recommended values. Welding Ensure the correct filler materials are used for the parent metals being welded; if in doubt please contact the welding machine manufacturer for advice. Galvanised Finish Galvanising is to BSEN ISO 1461 (BS 729: 1971). Welding of galvanised and zinc plated parts releases fumes which are hazardous to health unless proper protective equipment and adequate extraction is used. 4 5
Door Gear - Mild Steel Door Locking Mechanisms The choice of Door Locking Mechanism model depends on end frame and door design, and the test requirements for the end wall and racking loads. We will be pleased to give detailed advice, but the following points should be considered. Tube diameters of Ø22mm, Ø27mm and Ø34mm are available Material, mild steel or stainless steel Finish, self colour, zinc plated or galvanised Unbushed or bushed (bushed mechanisms ensure a smooth operating action) Weld on or bolt on brackets (bolt-on brackets can be fitted after final painting of the doors) Bolt on brackets, if repairs are necessary, removal or replacement is simple The resistance to racking loads of bolt-on brackets depends on the bracket length and number of fixing holes Short length weld-on brackets give better resistance to racking loads than short bolt-on brackets Steel doors can be fitted with weld on or bolt on brackets. Ply/metal or GRP doors can only be fitted with bolt on brackets If racking forces are high, a combination of locking mechanisms with long and short brackets can be used Short brackets are fitted to the locking mechanism near the hinged side of the door and long brackets are used nearest the centre of the door The type of door seal fitted can dictate the required bracket type Cam and keeper widths Standard or modified cams (see illustration) Type of door handles required (see illustration) All locking mechanisms shown in this catalogue are supplied with standard handles and flush fitting keepers as standard, but can also be supplied in many other conditions to meet the demands of our customers. They can be supplied as loose parts (without tube) or fully welded ready for immediate fitting. If fully welded locking mechanisms are required, please contact us for further details and a lock rod chart as this will ensure your order is processed to your precise requirements. Several of the container locking mechanisms shown in this catalogue are approved by Lloyds Register. 6 7
Door Gear - Mild Steel Bloxwich Door Gear - Mild Steel 27 Ø 22 Ø 27 Ø 34 Ø B 1000 pp. 10-11 B 2000 pp. 12-13 B 2000MN with Forged Handle pp. 14-15 B 2000MN with D Grip Handle pp. 16-17 B 2533B pp. 26-27 B 2500A pp. 28-29 B 2566 pp 30-31 27 Ø 34 Ø B 2000MNV B 2000MNV B 2000NMN variable height with variable height with with Forged Handle, Forged Handle D Grip Handle Narrow Base Cam pp. 18-19 pp. 20-21 and Keeper B 2000NMNV BE 2566M B 2588 variable height with Forged pp. 32-33 pp. 34-35 Handle, Narrow Base Cam and Keeper pp. 22-23 pp. 24-25 8 9
Door Gear - Mild Steel Model No. B 1000 22 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCP 12180 Keeper (Bolt on) 300g 2 2 BCP 12179 Cam L H 325g 1 3 BCP 12178 Cam R H 325g 1 4 BCP 11238 Bearing Bracket (Outer) 107g 3 5 BCP 11239 Bush 4g 3 6 BCP 12188 Packing Plate 113g 3 7 BCP 14354 Handle 360g 1 8 BCP 14355 Retainer 135g 1 9 BCP 14356 Catch 52g 1 10 BCP 11242 Bush 6g 1 11 BCP 12199 Rivet 15g 1 12 BCP 11243 Handle Hub 140g 1 13 BCP 11244 Anti Rack Ring 12g 2 14 BCP 12339 Tube 22 Ø X 1.6mm (Sold Separately) 828g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 10 11
Door Gear - Mild Steel Model No. B 2000 27 Ø Un-Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 22788/1 Keeper (Bolt on) 650g 2 2 22789 Cam 840g 2 3 22080-HD Bearing Bracket (Outer Large) 306g 2 4 22077-HD Bearing Bracket (Inner Large) 201g 2 5 22082-HD Bearing Bracket (Outer Small) 158g 2 6 22081-HD Bearing Bracket (Inner Small) 118g 2 7 BCP 13602 Handle Hub 246g 1 8 BCP 10038/1 Rivet 25g 1 9 22185/Z Bush 6g 1 10 BCP 13856 Catch 95g 1 11 BCP 13855 Retainer 200g 1 12 22182M Handle 820g 1 13 BCP 12337 Tube 27 Ø X 3.2mm (Sold Separately) 1870g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 12 13
Door Gear - Mild Steel Model No. B 2000MN With Forged Handle 27 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 22788/1 Keeper (Bolt-on) 650g 2 2 22789 Cam 840g 2 3 BCP 14063-HD Bearing Bracket (Outer Large) 250g 2 4 BCP 14064-HD Bearing Bracket (Outer Small) 120g 2 5 BCP 14271-HD Bush 25g 2 6 BCP 14065-HD Bush 14g 2 7 BCP 13602 Handle Hub 246g 1 8 BCP 10038/1/Z Rivet 25g 1 9 22185/Z Bush 6g 1 10 BCP 13856 Catch 95g 1 11 BCP 14033 Retainer 200g 1 12 22182M Handle 820g 1 13 BCP 14081 Sleeve 20g 1 14 BCP 12337 Tube 27 Ø X 3.2mm (Sold Separately) 1870g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 14 15
Door Gear - Mild Steel Model No. B 2000MN With D Grip Handle 27 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 22788/1 Keeper (Bolt-on) 650g 2 2 22789 Cam 840g 2 3 BCP 14063-HD Bearing Bracket (Outer Large) 250g 2 4 BCP 14271-HD Bush 25g 2 5 BCP 14064-HD Bearing Bracket (Outer Small) 120g 2 6 BCP 14065-HD Bush 14g 2 7 BCP 13602 Handle Hub 246g 1 8 BCP 10038/1/Z Rivet 25g 1 9 BCP 12427/Z Bush 6g 1 10 BCP 12399 Catch 95g 1 11 BCP 12398 Retainer 200g 1 12 BCP 13773Z Handle 800g 1 13 BCP 12337 Tube 27 Ø X 3.2mm (Sold Separately) 1870g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 16 17
Door Gear - Mild Steel Model No. B 2000MNV Variable height with Forged Handle 27 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Upper and lower rod assemblies fully welded, other parts supplied loose) Item Part No Description Weight Qty 1 22788/1 Keeper (Bolt-on) 650g 2 2 BCP 13953 Upper Rod Assy 6435g 1 3 BCP 14063-HD Bearing Bracket (Outer Large) 250g 2 4 BCP 14271-HD Bush 25g 2 5 BCP 14064-HD Bearing Bracket (Outer Small) 120g 2 6 BCP 14065-HD Bush 14g 2 7 BCP 14091 Lower Rod Assy 1290g 1 8 BCP 13954 Handle And Hub Assy 1200g 1 9 BCP 14081 Sleeve 20g 1 10 BCSP 13955M Spirol Pin 4g 2 11 22185/Z Bush 6g 1 12 BCP 13856 Catch 95g 1 13 BCP 14033 Retainer 200g 1 Cam centres dimension controlled by customer by simply reducing length of upper rod assembly. (Max cam centres = 3430). Upper rod assembly supplied with 3m length tube. We can also supply upper rod assemblies at 3.5-4m, we advise that extra bearing brackets are used, please contact us for details. Lower rod assembly spigotted for easy assembly and alignment with upper rod assembly. Handle and hub assembly to be fixed in position by cross-drilling and pinning. Recommended hole size = Ø6.13 max / Ø5.95 min. The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 18 19
Door Gear - Mild Steel Model No. B 2000MNV Variable height with D Grip Handle 27 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Upper and lower rod assemblies fully welded, other parts supplied loose) Item Part No Description Weight Qty 1 22788/1 Keeper (Bolt On) 650g 2 2 BCP 13953 Upper Rod Assy 6450g 1 3 BCP 14063-HD Bearing Bracket (Outer Large) 250g 2 4 BCP 14271-HD Bush 25g 2 5 BCP 14064-HD Bearing Bracket (Outer Small) 120g 2 6 BCP 14065-HD Bush 14g 2 7 BCP 14091 Lower Rod Assy 1290g 1 8 BCP 13966 Handle And Hub Assy 1175g 1 9 BCSP 13955M Spirol Pin 4g 2 10 BCP 12427/Z Bush 8g 1 11 BCP 12399 Catch 95g 1 12 BCP 12398 Retainer 200g 1 Cam centres dimension controlled by customer by simply reducing length of upper rod assembly. (Max cam centres = 3430). Upper rod assembly supplied with 3m length tube. We can also supply upper rod assemblies at 3.5-4m, we advise that extra bearing brackets are used, please contact us for details. Lower rod assembly spigotted for easy assembly and alignment with upper rod assembly. Handle and hub assembly to be fixed in position by cross-drilling and pinning. Recommended hole size = Ø6.13 max / Ø5.95 min. The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 20 21
Door Gear - Mild Steel Model No. B 2000NMN With Forged Handle, Narrow Base Cam and Keeper 27 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCP 13605 Keeper (Bolt On) 395g 2 2 BCP 13604 Cam 776g 2 3 BCP 14063-HD Bearing Bracket (Outer Large) 250g 2 4 BCP 14271-HD Bush 25g 2 5 BCP 14064-HD Bearing Bracket (Outer Small) 120g 2 6 BCP 14065-HD Bush 14g 2 7 BCP 13602 Handle Hub 246g 1 8 BCP 10038/1 Rivet 25g 1 9 22185/Z Bush 6g 1 10 BCP 13856 Catch 95g 1 11 BCP 14033 Retainer 200g 1 12 22182M Handle 820g 1 13 BCP 14081 Sleeve 20g 1 14 BCP 12337 Tube 27 Ø X 3.2mm (Sold Separately) 1870g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 22 23
Door Gear - Mild Steel Model No. B 2000NMNV Variable height with Forged Handle, Narrow Base Cam and Keeper 27 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Upper and lower rod assemblies fully welded, other parts supplied loose) Item Part No Description Weight Qty 1 BCP 13605-G Keeper (Bolt-on) 395g 2 2 BCP 14202 Upper Rod Assy 6386g 1 3 BCP 14063-HD Bearing Bracket (Outer Large) 250g 2 4 BCP 14271-HD Bush 25g 2 5 BCP 14064-HD Bearing Bracket (Outer Small) 120g 2 6 BCP 14065-HD Bush 14g 2 7 BCP 14203 Lower Rod Assy 1100g 1 8 BCP 13954 Handle And Hub Assy 1225g 1 9 BCP 14081 Sleeve 20g 1 10 BCSP 13955M Spirol Pin 4g 2 11 22185/Z Bush 6g 1 12 BCP 13856 Catch 95g 1 13 BCP 14033 Retainer 200g 1 Cam centres dimension controlled by customer by simply reducing length of upper rod assembly. (Max cam centres = 3430). Upper rod assembly supplied with 3m length tube. We can also supply upper rod assemblies at 3.5-4m, we advise that extra bearing brackets are used, please contact us for details. Lower rod assembly spigotted for easy assembly and alignment with upper rod assembly. Handle and hub assembly to be fixed in position by cross-drilling and pinning. Recommended hole size = Ø6.13 max / Ø5.95 min. The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 24 25
Door Gear - Mild Steel Model No. B 2533B 27 Ø Bushed Mechanism Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCP 10152 Keeper 425g 1 2 BCP 10081 Cam L H 490g 1 3 BCP 10153 Keeper 425g 1 4 BCP 10080 Cam RH 490g 1 5 BCP 14166 Bearing Bracket (Outer Large) 440g 2 6 BCP 14092 Split Bush 12g 5 7 BCP 14094 Bearing Bracket (Outer Small) 100g 1 8 BCP 13602 Handle Hub 246g 1 9 BCP 10038/1 Rivet 25g 1 10 22185 Bush 9g 1 11 BCP 13856 Catch 95g 1 12 BCP 13855 Retainer 200g 1 13 22182M Handle 820g 1 14 BCP 10120 Anti Rack Ring 30g 2 15 BCP 12337 Tube 27 Ø x 3.2mm (Sold Separately) 1870g/m 1 Optional bolt-on keepers available - part no BCP 12526M The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 26 27
Door Gear - Mild Steel Model No. B 2500A 34 Ø Un-Bushed Mechanism (Heavy Duty) Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) 1 Item Part No Description Weight Qty 1 BCP 12526 M/G Keeper Universal Bolt On 390g 2 2 BCP 10081 Cam L H 630g 1 3 BCP 10080 Cam R H 630g 1 4 23153 Bearing Bracket (Outer Large) 890g 2 5 BCP 11748 Bearing Bracket (Inner Large) 560g 2 2 6 5 8 6 BCP 11945 Anti Rack Ring 64g 2 11 12 13 7 22245 Bearing Bracket (Outer Small) 180g 2 8 22246 Bearing Bracket (Inner Small) 110g 2 9 BCP 13602 Handle Hub 246g 1 10 BCP 10038/1/Z Rivet 25g 1 11 22185/Z Bush 6g 1 4 7 9 12 BCP 13856 Catch 95g 1 13 BCP 13855 Retainer 200g 1 10 14 22182/M Handle 820g 1 15 14 15 BCP 12338 Tube 34 Ø x 3.2mm (Sold Separately) 2410g/m 1 Optional keepers available - BCP10152 & BCP10153 Weld On BCP 10080M & BCP 10081M modified cams may also be used (see page 7) Approved by Lloyds Register of Shipping Standard on ISO and offshore containers The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 3 28 29
Door Gear - Mild Steel Model No. B 2566 34 Ø Bushed Mechanism with Bolt-on Brackets Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCP 10153 Keeper L H 390g 1 2 BCP 10081 Cam L H 630g 1 3 BCP 10152 Keeper R H 390g 1 4 BCP 10080 Cam R H 630g 1 5 BCP 14037 Bearing Bracket (Outer Large) 475g 2 6 BCP 12536 Bush - Long 38g 2 7 BCP 13507 Bearing Bracket (Outer Small) 110g 2 8 BCP 13518 Bush - Short 16g 2 9 BCP 13602 Handle Hub 240g 1 10 BCP 10038/1/G Rivet 25g 1 11 22185/Z Bush 6g 1 12 BCP 13856 Catch 95g 1 13 BCP 13855 Retainer 220g 1 14 22182M Handle 820g 1 15 BCP 11945 Anti Rack Ring 64g 2 16 BCP 12338 Tube 34Ø X 3.2mm (Sold Separately) 2410g/m 1 Also available with BCP 12526M Bolt-On Keepers BCP 10080M & BCP 10081M modified cams may also be used (see page 7) Supplied with Snap-on Bushing Approved by Lloyds Register of Shipping Standard on ISO and offshore containers The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 30 31
Door Gear - Mild Steel Model No. BE 2566M 34 Ø Bushed Mechanism with Bolt-on Brackets Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCP 10153 Keeper L H 390g 1 2 BCP 10081 Cam L H 630g 1 3 BCP 10152 Keeper R H 390g 1 4 BCP 10080 Cam R H 630g 1 5 BCP 12684 Bearing Bracket (Outer Large) 466g 2 6 BCP 12536 Bush - Long 38g 2 7 BCP 13507 Bearing Bracket (Outer Small) 110g 2 8 BCP 13518 Bush - Short 16g 2 9 BCP 13602 Handle Hub 240g 1 10 BCP 10038/1/G Rivet 25g 1 11 22185/Z Bush 6g 1 12 BCP 13856 Catch 95g 1 13 BCP 13855 Retainer 220g 1 14 22182M Handle 820g 1 15 BCP 11945 Anti-Rack Ring 64g 4 16 BCP 12338 Tube 34 Ø x 3.2mm (Sold Separately) 2410g/m 1 Also available with BCP 12526M Bolt-On Keepers BCP 10080M & BCP 10081M modified cams may also be used (see page 7) Supplied with Snap-on Bushing Approved by Lloyds Register of Shipping Standard on ISO and offshore containers The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 32 33
Door Gear - Mild Steel Model No. B 2588 34 Ø Bushed Mechanism with Weld-on Brackets Supplied in Self Colour, Zinc or Galvanised (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCP 10153 Keeper L H 390g 1 2 BCP 10081 Cam L H 630g 1 3 BCP 10152 Keeper R H 390g 1 4 BCP 10080 Cam R H 630g 1 5 BCP 14308 Bearing Bracket (Outer Large) 390g 2 6 BCP 12536 Bush - Long 38g 2 7 BCP 13593 Bearing Bracket (Outer Small) 90g 2 8 BCP 13518 Bush - Short 16g 2 9 BCP 11945 Anti Rack Ring 64g 2 10 BCP 13602 Handle Hub 240g 1 11 BCP 10038/1/Z Rivet 25g 1 12 BCP 14290 Retainer Assembly 300g 1 13 22182M Handle 820g 1 14 BCP 12338 Tube 34 Ø X 3.2mm (Sold Separately) 2410g/m 1 Alternative retainer assembly BCP14273 (clip version - ask for details) Supplied with Snap-on Bushing Approved by Lloyds Register of Shipping Taiwan Utility Model No UM 83275 GB PAT App 2 261 255 Korea PAT App 20782 / 92 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 34 35
Door Gear - Mild Steel Mild Steel Tube Notes Description Length Part No Ø22 x 1.6 wall 2000 BCP 12339/2000 Ø22 x 1.6 wall 3000 BCP 12339/3000 Ø27 x 3.2 wall 7500 BCP 12337/7500 Ø34 x 3.2 wall 7500 BCP 12338/7500 Other lengths may be available on request, please contact us for details. 36 37
Door Gear - Stainless Steel Door Gear - Stainless Steel 22 Ø 27 Ø 27 Ø 34 Ø BS 1000 pp. 40-41 BS 2010N with Forged Handle pp. 42-43 BS 2010N with D Grip Handle pp. 44-45 BS 2533B with D Grip Handle pp. 52-53 BS 2566 pp. 54-55 BS 3500A pp. 56-57 27 Ø 34 Ø BS 2010NV BS 2010NV BS 2533B BS 3566 variable height with variable height with with Forged Handle pp. 58-59 Forged Handle D Grip Handle pp. 50-51 pp. 46-47 pp. 48-49 38 39 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 1000 22 Ø Bushed Mechanism (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 12180 Keeper (Bolt on) 300g 2 2 BCSP 12179 Cam L H 325g 1 3 BCSP 12178 Cam R H 325g 1 4 BCSP 11238 Bearing Bracket (Outer) 107g 3 5 BCSP 11239 Bush 4g 3 6 BCSP 12188 Packing Plate 113g 3 7 BCSP 14354 Handle 360g 1 8 BCSP 14355 Retainer 135g 1 9 BCSP 14356 Catch 52g 1 10 BCSP 11242 Bush 6g 1 11 BCSP 12199 Rivet 15g 1 12 BCSP 11243 Handle Hub 140g 1 13 BCSP 12200 Anti Rack Ring 12g 2 14 BCSP 12339 Tube 22 Ø X 1.6mm (Sold Separately) 828g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 40 41 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 2010N With Forged Handle 27 Ø Bushed Mechanism (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 13605 Keeper (Bolt on) 418g 2 2 BCSP 14173 Cam 395g 2 3 BCSP 14174 Bearing Bracket (Outer Large) 305g 2 4 BCSP 14094 Bearing Bracket (Outer Small) 100g 1 5 BCP 14089 Bush 16g 5 6 BCSP 22084 Handle Hub 189g 1 7 BCSP 13637 Rivet 21g 1 8 BCSP 13636 Bush 9g 1 9 BCSP 13856 Catch 95g 1 10 BCSP 13855 Retainer 185g 1 11 BCSP 22182 Handle 820g 1 12 BCSP 14175 Anti Rack Ring 32g 2 13 BCSP 12337 Tube 27 Ø X 2mm (Sold Separately) 1235g/m 1 Brackets are designed to fit over anti-rack rings Supplied with anti-seize snap on bushes Supplied with narrow base keepers The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 42 43 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 2010N With D Grip Handle 27 Ø Bushed Mechanism (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 13605 Keeper 418g 2 2 BCSP 14173 Cam 395g 2 3 BCSP 14174 Bearing Bracket (Outer Large) 305g 2 2 11 1 4 BCSP 14094 Bearing Bracket (Outer Small) 100g 1 5 BCP 14089 Bush 16g 5 6 BCSP 13966 Handle & Hub Assy 1160g 1 7 BCSP 13955M Spirol Pin 5g 2 8 BCSP 13655 Bush 6g 1 9 BCSP 12399 Catch 95g 1 5 3 12 10 BCSP 12398 Retainer 185g 1 11 BCSP 14175 Anti Rack Ring 32g 2 6 8 9 10 12 BCSP 12337 Tube 27 Ø X 2mm (Sold Separately) 1235g/m 1 4 Brackets are designed to fit over anti-rack rings Supplied with anti-seize snap on bushes Supplied with narrow base keepers Recommended hole size max = Ø6.13mm / min = Ø5.95 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 7 44 45 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 2010NV Variable height with Forged Handle 27 Ø Bushed Mechanism (Upper and lower rod assemblies fully welded, other parts supplied loose) Item Part No Description Weight Qty 1 BCSP 13605 Keeper 418g 2 2 BCSP 14240 Upper Rod Assembly 4135 1 3 BCSP 14174 Bearing Bracket (Outer Large) 305g 2 4 BCSP 14094 Bearing Bracket (Outer Small) 100g 1 5 BCP 14089 Bush 16g 5 6 BCSP 14241 Lower Rod Assy 810g 1 7 BCSP 13954 Handle & Hub Assy 1160g 1 8 BCSP 13955M Spirol Pin 5g 2 9 BCSP 13636 Bush 9g 1 10 BCSP 13856 Catch 95g 1 11 BCSP 13855 Retainer 185g 1 Brackets are designed to fit over anti-rack rings Supplied with anti-seize snap on bushes Supplied with narrow base keepers Can be for either left hand or right hand applications Cam centre dimensions controlled by customer by simply reducing length of upper rod assembly (Max centres = 3335) Upper rod assembly supplied with 3m length tube Lower rod assy spigotted for easy assy and alignment with upper rod assy Handle position fixed at 300mm from centre of lower cam Handle and hub assembly can be fixed in position by either cross drilling and pinning or welding if preferred Recommended hole size max = Ø6.13mm / min = Ø5.95 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 46 47 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 2010NV Variable height with D Grip Handle 27 Ø Bushed Mechanism (Upper and lower rod assemblies fully welded, other parts supplied loose) Item Part No Description Weight Qty 1 BCSP 13605 Keeper 418g 2 2 BCSP 14240 Upper Rod Assembly 4135 1 3 BCSP 14174 Bearing Bracket (Outer Large) 305g 2 4 BCSP 14094 Bearing Bracket (Outer Small) 100g 1 5 BCP 14089 Bush 16g 5 6 BCSP 14241 Lower Rod Assy 810g 1 7 BCSP 13966 Handle & Hub Assy 1160g 1 8 BCSP 13955M Spirol Pin 5g 2 9 BCSP 13655 Bush 6g 1 10 BCSP 12399 Catch 95g 1 11 BCSP 12398 Retainer 185g 1 Brackets are designed to fit over anti-rack rings Supplied with anti-seize snap on bushes Supplied with narrow base keepers Can be for either left hand or right hand applications Cam centre dimensions controlled by customer by simply reducing length of upper rod assembly (Max centres = 3335) Upper rod assembly supplied with 3m length tube Lower rod assy spigotted for easy assy and alignment with upper rod assy Handle position fixed at 300mm from centre of lower cam Handle and hub assembly can be fixed in position by either cross drilling and pinning or welding if preferred Recommended hole size max = Ø6.13mm / min = Ø5.95 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 48 49 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 2533B With Forged Handle 27 Ø Bushed Mechanism with Bolt-on Brackets (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 12526 Keeper (Bolt on) 425g 2 2 BCSP 12275 Cam L H 570g 1 3 BCSP 12274 Cam R H 570g 1 4 BCSP 14166 Bearing Bracket (Outer Large) 440g 2 5 BCP 14089 Split Bush 12g 5 6 BCSP 14094 Bearing Bracket (Outer Small) 30g 1 7 BCSP 22084 Handle Hub 189g 1 8 BCSP 13637 Rivet 21g 1 9 BCSP 13636 Bush 9g 1 10 BCSP 13856 Catch 95g 1 11 BCSP 13855 Retainer 185g 1 12 BCSP 22182 Handle 820g 1 13 BCSP 10120 Anti Rack Ring 30g 2 14 BCSP 12337 Tube 27 Ø X 2mm (Sold Separately) 1235g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 50 51 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 2533B With D Grip Handle 27 Ø Bushed Mechanism with Bolt-on Brackets (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 12526 Keeper 425g 2 2 BCSP 12275 Cam L H 570g 1 3 BCSP 12274 Cam R H 570g 1 4 BCSP 14166 Bearing Bracket (Outer Large) 440g 2 5 BCP 14089 Split Bush 12g 5 6 BCSP 14094 Bearing Bracket (Outer Small) 30g 1 7 BCSP 22084 Handle Hub 189g 1 8 BCSP 13637 Rivet 21g 1 9 BCSP 13655 Bush 9g 1 10 BCSP 12399 Catch 110g 1 11 BCSP 12398 Retainer 185g 1 12 BCSP 13773 Handle 820g 1 13 BCSP 10120 Anti Rack Ring 30g 2 14 BCSP 12337 Tube 27 Ø X 2mm (Sold Separately) 1235g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 52 53 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 2566 34 Ø Bushed Mechanism with Bolt-on Brackets (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 12526M Keeper (Bolt on) 425g 2 2 BCSP 12275 Cam L H 630g 1 3 BCSP 12274 Cam R H 630g 1 4 BCSP 12689 Bearing Bracket (Outer Large) 460g 2 5 BCP 13597 Bush - Long 40g 2 6 BCSP 13507 Bearing Bracket (Outer Small) 110g 2 7 BCP 13596 Bush - Short 17g 2 8 BCSP 22084 Handle Hub 189g 1 9 BCSP 13637 Rivet 21g 1 10 BCSP 13636 Bush 9g 1 11 BCSP 13856 Catch 110g 1 12 BCSP 13855 Retainer 220g 1 13 BCSP 22182M Handle 820g 1 14 BCSP 10176 Anti Rack Ring 32g 2 15 BCSP 12338 Tube 34 Ø X 2.6mm (Sold Separately) 2120g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 54 55 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 3500A 34 Ø Un-Bushed Mechanism with Bolt-on Brackets (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 11034 Keeper 455g 2 2 BCSP 11033 Cam L H 675g 1 3 BCSP 11032 Cam R H 675g 1 4 BCSP 23153 Bearing Bracket (Outer Large) 890g 2 5 BCSP 11748 Bearing Bracket (Inner Large) 560g 2 6 BCSP 10176 Anti Rack Ring 64g 2 7 BCSP 22245 Bearing Bracket (Outer Small) 180g 2 8 BCSP 22246 Bearing Bracket (Inner Small) 110g 2 9 BCSP 22084 Handle Hub 189g 1 10 BCSP 13637 Rivet 21g 1 11 BCSP 13636 Bush 9g 1 12 BCSP 13856 Catch 110g 1 13 BCSP 13855 Retainer 220g 1 14 BCSP 22182M Handle 820g 1 15 BCSP 12338 Tube 34 Ø X 2.6mm (Sold Separately) 2120g/m 1 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 56 57 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Model No. BS 3566 34 Ø Bushed Mechanism with Bolt-on Brackets (Parts supplied loose, fully welded available) Item Part No Description Weight Qty 1 BCSP 11034 Keeper 455g 2 2 BCSP 11033 Cam L H 675g 1 3 BCSP 11032 Cam R H 675g 1 4 BCSP 12689 Bearing Bracket (Outer Large) 460g 2 5 BCP 13597 Bush - Long 40g 2 2 14 1 6 BCSP 13507 Bearing Bracket (Outer Small) 110g 1 7 BCP 13596 Bush - Short 17g 1 5 8 BCSP 22084 Handle Hub 189g 1 9 BCSP 13637 Rivet 21g 1 4 9 8 10 11 12 10 BCSP 13636 Bush 9g 1 11 BCSP 13856 Catch 110g 1 7 12 BCSP 13855 Retainer 220g 1 13 BCSP 22182M Handle 820g 1 6 14 BCSP 10176 Anti Rack Ring 32g 2 15 BCSP 12338 Tube 34 Ø X 2.6mm (Sold Separately) 2120g/m 1 15 The bearing bracket small (inner and outer if applicable) quantities shown/listed are for reference only, actual quantities are application and customer dependent 13 3 58 59 Email: support@bloxwichtc.co.uk
Door Gear - Stainless Steel Stainless Steel Tube Notes Description Length Part No Ø22 x 1.6 wall 2000 BCSP 12339/2000 Ø22 x 1.6 wall 3000 BCSP 12339/3000 Ø27 x 2.0 wall 2000 BCSP 12337/2000 Ø27 x 2.0 wall 3000 BCSP 12337/3000 Ø34 x 2.6 wall 2000 BCSP 12338/2000 Ø34 x 2.6 wall 3000 BCSP 12338/3000 Other lengths may be available on request, please contact us for details. 60 61 Email: support@bloxwichtc.co.uk
Hinges & Brackets Hinges & Brackets The choice of hinges, brackets and associated parts also depends on end frame and door design, and the test requirements for end wall and racking loads. We will be pleased to give detailed advice, but the following points should be considered. Forged steel door hinges can usually only be welded to the doors Finish, self colour, zinc plated or galvanised are available Nylon ( A ) or phosphor bronze ( C ) bushes are available Bolt-on brackets and hinges can be fitted after final painting If repairs are necessary, removal or replacement of bolt-on brackets and hinges is simple Flat base forged steel door hinges are not recommended for use on offshore containers Customer logos are available subject to minimum order quantities. No logo (O) is standard Grease nipples ( N )can only be fitted to our range of forged hinges (see illustration for fitting positions) Seal-Groove Hinges Gives greater hinge life Sealant forms barrier across unwelded part of hinge (dependent upon the design) Prevents corrosion by stopping ingress of water behind hinge Sealant easily applied by conventional sealant gun Prevents rust streaks (as found with conventional hinges ) from forming on doors Seal-groove provides visual proof that the hinge has been sealed over total width selected hinges only 62 63
Hinges & Brackets Model No. BCP 11027 (Mild Steel) Forged Steel Door Hinge Model No. BCP 11026 (Mild Steel) Forged Steel Door Hinge Finish - self colour, zinc plated Bushed to suit 12.7 Ø hinge pin Weight - 860g See table if oil hole or grease nipple is required Finish - self colour, zinc plated Bushed to suit 12.7 Ø hinge pin Weight - 940g See table if oil hole or grease nipple is required Finish Bush No. Oil Hole Position Nipple Finish Bush No. Oil Hole Position Nipple Vertical 1 Vertical 1 Self Colour S BCP 10040 A Horizontal 2 Self Colour S BCP 10040 A Horizontal 2 45º 3 BCP 12595 N 45º 3 BCP 12595 N Zinc Z BCP 12119 C 135º 4 180º 5 Zinc Z BCP 12119 C 135º 4 180º 5 When ordering, please add the above characters to the part number to indicate required condition, eg BCP 11027SA1N indicates self colour with BCP 10040 bush, vertical oil hole and BCP 12595 grease nipple. Please refer to Grease Nipple Positions on section introduction. When ordering, please add the above characters to the part number to indicate required condition, eg BCP 11026SA1N indicates self colour with BCP 10040 bush, vertical oil hole and BCP 12595 grease nipple. Please refer to Grease Nipple Positions on section introduction. 38.1 63.5 61 38.1 63.5 6.4 61 57.2 130 111 6.5 72.5 64 65
Hinges & Brackets Model No. BCP 11026DM (Mild Steel) Forged Steel Door Hinge Flat Base Model No. BCP 11292 (Mild Steel) Forged Steel Door Hinge Finish - self colour, zinc plated Bushed to suit 12.7 Ø hinge pin Weight - 940g See table if oil hole or grease nipple is required Finish - self colour, zinc plated Bushed to suit 12.7 Ø hinge pin Weight - 1120g See table if oil hole or grease nipple is required Finish Bush No. Oil Hole Position Nipple Finish Bush No. Oil Hole Position Nipple Vertical 1 Vertical 1 Self Colour S BCP 10040 A Horizontal 2 Self Colour S BCP 10040 A Horizontal 2 45º 3 BCP 12595 N 45º 3 BCP 12595 N Zinc Z BCP 12119 C 135º 4 180º 5 Zinc Z BCP 12119 C 135º 4 180º 5 When ordering, please add the above characters to the part number to indicate required condition, eg BCP 11026DMSA1N indicates self colour with BCP 10040 bush, vertical oil hole and BCP 12595 grease nipple. Please refer to Grease Nipple Positions on section introduction. When ordering, please add the above characters to the part number to indicate required condition, eg BCP 11292SA1N indicates self colour with BCP 10040 bush, vertical oil hole and BCP 12595 grease nipple. Please refer to Grease Nipple Positions on section introduction. 38.1 6.4 63.5 61 90.4 150 66 67
Hinges & Brackets Model No. BCP 10524 (Mild Steel) Forged Steel Door Hinge Model No. BCP 10524DM (Mild Steel) Forged Steel Door Hinge Flat Base Finish - self colour, zinc plated Bushed to suit 12.7 Ø hinge pin Weight - 1250g See table if oil hole or grease nipple is required Finish - self colour, zinc plated Bushed to suit 12.7 Ø hinge pin Weight - 1250g See table if oil hole or grease nipple is required Finish Bush No. Oil Hole Position Nipple Finish Bush No. Oil Hole Position Nipple Vertical 1 Vertical 1 Self Colour S BCP 10040 A Horizontal 2 Self Colour S BCP 10040 A Horizontal 2 45º 3 BCP 12595 N 45º 3 BCP 12595 N Zinc Z BCP 12119 C 135º 4 180º 5 When ordering, please add the above characters to the part number to indicate required condition, eg BCP 10524SA1N indicates self colour with BCP 10040 bush, vertical oil hole and BCP 12595 grease nipple. Please refer to Grease Nipple Positions on section introduction. Zinc Z BCP 12119 C 135º 4 180º 5 When ordering, please add the above characters to the part number to indicate required condition, eg BCP 10524DMSA1N indicates self colour with BCP 10040 bush, vertical oil hole and BCP 12595 grease nipple. Please refer to Grease Nipple Positions on section introduction. 68 69
Hinges & Brackets Model No. BCP 10045 (Mild Steel) Forged Steel Door Hinge Model No. BCP 1008-1 (Mild Steel) Reverse Hinge Finish - self colour or zinc plated Finish - self colour, zinc plated, galvanised or polyester 10.5 Ø fixing holes Bushed to suit 12.7 Ø stainless steel hinge pin or 1/2 bolt Weight - 1580g Bushed to suit 12.7 Ø hinge pin Application: For use on sealed or unsealed lids or hatches, reduces the overall height can be used/ordered with the BCP 1008-2 hinge bracket by requesting BCP 1008 Weight - 1033g See table if oil hole or grease nipple is required Hole Ø Finish Bush No. Oil Hole Position Nipple 10.5 B Self Colour Zinc Galvanised Polyester S Z G P BCP 10040 BCP 12119 When ordering, please add the above characters to the part number to indicate required condition, eg BCP 10045BZC indicates 10.5 Ø fixing hole, zinc plated with BCP 12119 bush. BCP 10045BZA indicates 10.5 Ø fixing hole, zinc plated with BCP 10040 bush. This hinge can be fitted with grease nipples, please refer to Grease Nipple Positions on section introduction. A C Vertical 1 Horizontal 2 45º 3 135º 4 180º 5 BCP 12595 N Finish Bush No. Oil Hole Position Nipple Self Colour S BCP 10040 A Vertical 1 Horizontal 2 45º 3 Zinc Z BCP 12119 C 135º 4 180º 5 BCP 12595 When ordering, please add the above characters to the part number to indicate required condition, e.g. BCP 1008-1SA1N indicates self colour with BCP 10040 bush, vertical oil hole and BCP 12595 grease nipple. Please refer to Grease Nipple Positions on section introduction. N 70 71
Hinges & Brackets Model No. BCP 12594 (Mild Steel) Model No. BCSP 12171 (Stainless Steel) Steel Hinge Model No. BCP 13607 (Mild Steel) Model No. BCSP 13607 (Stainless Steel) Steel Hinge Finish (Mild Steel only) - self colour, zinc plated, galvanised or polyester 10.5 or 8.5 Ø fixing holes Bushed to suit M12 bolt or 12. Ø stainless steel hinge pin or 1/2 bolt or 12.7 Ø hinge pin Weight - 620g Finish (Mild Steel only) - self colour, zinc plated,# galvanised or polyester 10.5 or 8.5 Ø fixing holes Bushed to suit M12 bolt or 12. Ø stainless steel hinge pin or 1/2 bolt or 12.7 Ø hinge pin Weight - 675g Hole Ø Logo Finish Bush No. ID No Logo O Self Colour S Zinc Z 10.5 B Customer logos are BCP 12456 12.0 D available subject Galvanise G to minimum order Polished V quantities. 8.5 A Polyester P BCP 12194 12.7 B Hole Ø Logo Finish Bush No. ID No Logo O Self Colour S Zinc Z 10.5 B Customer logos are BCP 12456 12.0 D available subject Galvanise G to minimum order Polished V quantities. 8.5 A Polyester P BCP 12194 12.7 B When ordering, please add the above characters to the part number to indicate required condition, eg BCP 12594BOZD indicates mild steel hinge, 10.5 Ø fixing holes, no logo, zinc plated with BCP 12456 bush. For stainless steel version please quote BCSP 12171BOVD When ordering, please add the above characters to the part number to indicate required condition, eg BCP 13607BOZD indicates mild steel hinge, 10.5 Ø fixing holes, no logo, zinc plated with BCP 12456 bush. For stainless steel version please quote BCSP 13607BOVD 72 73
Hinges & Brackets Model No. BCP 12447 (Mild Steel) Model No. BCSP 12447 (Stainless Steel) Steel Hinge Finish (Mild Steel only) - self colour, zinc plated, galvanised or polyester 10.5 or 8.5 Ø fixing holes Hinge Assemblies Pressed Hinges Other combinations available on request please contact us for further details Parts supplied in unassembled kits See the individual parts listed below for dimensions. Bushed to suit M12 bolt or 12. Ø stainless steel hinge pin or 1/2 bolt or 12.7 Ø hinge pin Weight - 620g Hole Ø Logo Finish Bush No. ID 10.5 B4 No Logo O Self Colour S B6 Zinc Customer logos are available subject Galvanise G to minimum order 8.5 A6 quantities. Polished V Z BCP 12456 12.0 D Model Hinge Bracket Bolt/Pin Nut/E Clip A Weight BCP 14242G BCP12594BOGD BCP14149 BCP12463 BCP12462 307 2.2kg BCP 14242Z BCP12594BOZD BCP14149 BCP12463 BCP12462 307 2.2kg BCP 15105 BCP15073BOZD BCP14149 BCP12463 BCP12462 297 1.1kg When ordering, please add the above characters to the part number to indicate required condition, eg BCP 12447B4OZD indicates mild steel hinge, with four 10.5 Ø fixing holes, no logo, zinc plated with BCP 12456 bush. For stainless steel version please quote BCSP 12447BOVD Polyester P BCP 12194 12.7 B BCP 15108 BCP13607BOZD BCP15100 BCP12463 BCP12462 324 1.1kg BCP 15109 BCP12447A6ZD BCP14149 BCP12463 BCP12462 368 2.2kg BCP 15110 BCP12594BOZD BCP14149 BCP12463 BCP12462 307 1.1kg BCSP 15105 BCSP15073BOVD BCSP14149 BCSP12463 BCSP12462 297 1.1kg BCSP 15108 BCSP13607BOVD BCSP15100 BCSP12463 BCSP12462 324 1.1kg BCSP 15109 BCSP12447A6OV2D BCSP14149 BCSP12463 BCSP12462 368 2.2kg BCSP 15110 BCSP12171BOVD BCSP14149 BCSP12463 BCSP12462 307 1.1kg 74 75
Hinges & Brackets Hinge Assemblies Forged Hinges c/w Bolt Other combinations available on request please contact us for further details Parts supplied assembled ready to weld in place All combinations use the BCP15111 hinge butt, BCSP15121 bolt, BCSP15133 flat washers, BCSP15128 castle nut and BCSP15127 cotter pin Model No. BCSP 16014 Barrel Hinge Self colour Serviceable lift off barrel hinge with grease nipple Fabricated and welded from 304 stainless steel Can be tailored to suit your designs Depending upon mounting arrangement Weight 625g Model Hinge Handing A Weight BCP 15113 BCP11026SC5N LH 145 1.4kg BCP 15114 BCP11292SC5N LH 165 1.5kg BCP 15115 BCP10524SC5N LH 218 1.7kg BCP 15117 BCP11026SC5N RH 145 1.4kg BCP 15118 BCP11292SC5N RH 165 1.5kg BCP 15119 BCP10524SC5N RH 218 1.7kg Model No. BCSP 14499 Barrel Hinge Self colour Serviceable lift off barrel hinge with grease nipple Fabricated and welded from 304 stainless steel Can be tailored to suit your designs Depending upon mounting arrangement Weight 930g 76 77
Hinges & Brackets Model No. BCSP 13302-AOV-MB Stainless Steel Hinge Bloxwich Standard Patent Design Supplied: Electro-Polished Finish Pressed Stainless Steel Hinge Weight - 440g Model No. BCSP 13302-AOV-M Stainless Steel Hinge Bloxwich Standard Patent Design Supplied: Electro-Polished Finish Pressed Stainless Steel Hinge Weight - 650g Model No. BCSP 13302-BOV Stainless Steel Hinge Bloxwich Standard Patent Design Supplied: Electro-Polished Finish Pressed Stainless Steel Hinge Weight - 650g Model No. BCP 1008-2 (Mild Steel) Hinge Bracket Can be used/ordered with the BCP 1008-1 hinge by requesting BCP 1008 Pivot hole size to suit M12 bolt or 12.0 Ø hinge pin (12.7 also available) Finish - self colour or zinc plated 78 79
Hinges & Brackets Model No. BCP 12228 (Mild Steel) Model No. BCSP 12228 (Stainless Steel) Hinge Bracket (Off set) Model No. BCP 14149 (Mild Steel) Model No. BCSP 14149 (Stainless Steel) Hinge Bracket Pivot holes size to suit M12 bolt or 12.0 Ø hinge pin (12.5 also available) Finish (Mild Steel only) - self colour or zinc plated Recommended with BCP 12594 Hinge Finish (Mild Steel only) - zinc plated or galvanised Weight - 180g For use with a variety of Bloxwich Hinges. Please contact us for further details. Model No. BCP 12992 (Mild Steel) Model No. BCSP 12992 (Stainless Steel) Hinge Bracket (Vertical) Pivot holes size to suit M12 bolt or 12.0 Ø hinge pin (12.5 also available) Finish (Mild Steel only) - self colour or zinc plated Model No. BCSP 15100 (Stainless Steel) Hinge Bracket Larger Width For use with 12 Ø bolt or hinge pin Weight - 290g For use with a variety of Bloxwich Hinges. Please contact us for further details. 80 81
Hinges & Brackets Model No. BCP 13608B (Mild Steel) Model No. BCSP 13608B (Stainless Steel) Hinge Bracket Use with BCP 13607 Hinges (Mild & Stainless Stainless) Pivot holes size to suit M12 bolt Model No. BCP 11354 (Mild Steel) Hinge Butt (standard) Finish (Mild Steel only) - self colour For use on all weld-on forged hinges Weight - 114g Finish (Mild Steel only) - zinc plated Model No. BCP 12459 (Mild Steel) Hinge Bracket Finish - self colour or zinc plated For use with a variety of Bloxwich Hinges. Please contact us for further details. Pivot hole size:- BCP12459/1 To suit M12 Bolt & Pin BCP12459/2 To suit 12.7 Ø Hinge pin (only) Model No. BCP 15111 (Mild Steel) Hinge Butt (special) Finish (Mild Steel only) - self colour For use on all weld-on forged hinges as it gives increased clearance for bolting Other sizes available on request Weight - 120g 82 83
Hinges & Brackets Bloxwich Hinge Pin Standards Bloxwich Hinge Pin Arrangements Various hinge pin arrangements showing common configurations. Other configurations are Finish Stainless Steel Type 304 except BCSP12272/94 which is Type 316 available, please contact us for details. Other pins avialable, please contact us for details vehicle or unit must be established by the designer. Hinge brackets or butts shown are for The below are only recommendations and the racking and door burst capabilities of the illustration purposes only. Average Weight - 10g Bloxwich recommend the fitment of grease nipples and regular inspection and maintenance of hinge components in service. Made by Bloxwich in accordance with our design standards, copyrights, trademarks and patents. When required Bloxwich provide certificates to 2.2 according to EN10204. When required Bloxwich will provide test results by an independent UK test house as per table of requirements 3-6 of DNV 2.7-1 (2013). 84 Tel: 01543 435160 Fax: 01543 469610 85
Hinges & Brackets Model No. BCSP 14164 (Stainless Steel) E Clip Finish Stainless Steel Use with: BCSP 12225/94 BCSP 14163 BCSP 12273/94 BCSP 24001/92 Model No. BCP 12463 (Zinc Plated) Model No. BCSP 12463 (Stainless Steel) M12 Bolt For use with a variety of Bloxwich Hinge Brackets. Please contact us for further details. Model No. BCSP 12336/20 (Stainless Steel) Hinge Pin Collar For use with a variety of Bloxwich Hinge Pins and Brackets. Please contact us for further details. Model No. BCP 12462 (Zinc Plated) Model No. BCSP 12462 (Stainless Steel) M12 Nyloc Nut For use with a variety of Bloxwich Hinge Brackets. Please contact us for further details. 86 87
Hinges & Brackets Model No. BCP 15121 (Stainless Steel) ½ UNC Bolt For use with a variety of Bloxwich Hinge Brackets and butts. Please contact us for further details. Model No. BCP 15128 (Stainless Steel) ½ UNC Castle Nut For use with a variety of Bloxwich Hinge Bolts, Brackets and butts. Please contact us for further details. Hole position drilled to order. Model No. BCP 15133 (Stainless Steel) ½ UNC Flat Washer For use with a variety of Bloxwich Hinge Brackets and butts. Reduces paintwork damage on assembly. Model No. BCP 15127 (Stainless Steel) Ø2.5 x 25 Cotter Pin For use with a variety of Bloxwich Hinge Bolts, Brackets and butts. Please contact us for further details. Please contact us for further details. OD [0.88] 22.23, thickness [0.06]1.6. 88 89
Hooks / Retainers / Catches Door Retainers The choice of door hooks, retainers and catch plates etc. is driven by the application. We are pleased to give detailed advice but the following points should be considered. Weld on or rivet/bolt-on options are available Material, mild steel or stainless steel Finish, self colour, zinc plated or galvanised Options for fitting to flat or corrugated sides Back plates are available Several hook lengths are available (and others can be created) Are springs required? Please contact us for details Rivet/bolt-on on items can be fitted after final painting If repairs are necessary, removal or replacement of rivet/bolt-on items is simple Steel doors/sides can be fitted with weld on or bolt on/rivet on items. Ply/metal or GRP doors can only be fitted with bolt on/rivet on items. Model No. CAT as below Heavy Duty Hook Self colour, zinc plated and stainless steel options available Rivet/bolt-on or weld-on options Others sizes and options available on request Model No. BCP 13094 Door Holder Finish - Zinc plated Spring loaded 200mm of travel Model No. Variant Rivet/Bolt-On or Weld On A Weight CAT 120-Z Zinc plated Rivet/Bolt-On 97 180g CAT 130-Z Zinc plated Rivet/Bolt-On 148 207g CAT 130-L/G Galvanised extended arm Rivet/Bolt-On 300 275g Rubber door stop Weight 2.3 kg CAT 131 CAT 131SS Self colour recommended for use with BCP 14469 Stainless Steel recommended for use with BCSP 14469 Weld-On 148 207g Weld-On 148 240g CAT 131-G-300 Galvanised extended arm Weld-On 300 275g 90 91
Hooks / Retainers / Catches Model No. BCSP 15019 (Stainless Steel) Hook supplied with PVC Black Plate BCP12770 Weight - 97g Model No. 22376 Stainless Steel Catch Plate Supplied with PVC Back Plate BCP 12770 BCP 12770 Weight - 16g 22376 Weight - 40g Model No. CAT 121-Z Standard Catch Plate with Spring Weight - 70g Model No. CAT 132 (Mild Steel) Model No. CAT 132SS (Stainless Steel) Recessed Catch Plate (Weld On) Weld on Weight - 45g 92 93
Hooks / Retainers / Catches Model No. BCP 14469 (Mild Steel) Model No. BCSP 14469 (Stainless Steel) Recessed Catch Plate (Weld On) Mild Steel Weight - 195g Stainless Steel Weight - 180g Model No. BCSP 16021 Door Retainer Chain & Carabine Stainless steel For use with BCP15058 tag line pin box Can also be fitted through the door gear catch (modification required) Part Number BCP 14469 BCSP 14469 Variant Recessed Catch Plate (Weld On) used with CAT 131 Recessed Catch Plate (Weld On) used with CAT 131-SS is the number of links required. Each extra link adds 27mm to the length Carabine welded to chain Chain can be cut and welded through BCP11354 or it can be bolted as show below Weight 354g (8 links as shown) Model No. BCP 15058 Tag Line Pin Box / Recessed Catch Plate Large Recessed Catch with Door Tie Back Pin Pressed Steel Box 304 8mm Stainless Steel Pin welded into position Options: Self colour pan Applications: Tag line point or recessed catch plate (when a chain and carabine are used) 94 95