Compact Hydraulic Jacks and Heavy Lift Solutions
Compact Jacks 10 to 150 Tonne Capacity
We offer both the porta-power unit and the unique compact hydraulic jack. However, we recommend the compact hydraulic jack in most cases for its productivity, safety, reliability and to reduce your maintenance and purchasing costs through innovation, while improving quality. Shown top right is a 15 tonne Compact Jack weighing only 3.7 kgs.
Compact range up to 150 tonnes
Compact range strokes from 25mm to 75mm, solid piston, hollow or threaded hollow pistons
Simson - The only underwater and stand alone hydraulic power tools
The handle can be inserted in one of 2 positions and then rotated 360 o to any angle for tight situations (for full operation see movie on our website).
No hose, no quick couplings, no dirt ingress, no oil leaks. The ideal tool for fabrication and heavy industry.
Dyna bolt testing made easy in any position with a Compact jack, mounted with a manometer.
Pulling bush off with hollow Compact Jack Pushing bush on with hollow Compact Jack Compact Jack with hollow cylinder makes light work of pushing on or pulling off a bush. See website for full movie demonstration www.bakerprovan.com.au
If you re in a workshop maybe the long lead, power supply and pushing a trolley on a concrete floor you can live with. But when you re in the field or a mine site The largest Simson compact hydraulic jack, rated to 150 tonnes, even at 41 kgs, has significant portability benefits over the power pack on the left and significantly cheaper!
Other Simson Compact Power Tools 3.5 metres
Compact Lifting Wedge 10 tonne wedge 20 tonne wedge 3.5 metres Wedge fully extended 8mm gap is all you need for this 10 or 20 tonne rated compact lifting wedge, providing a parrallel lift and a 50mm stroke, in 10mm increments.
4 tonne Compact Flange Spreader
15 tonne Compact Flange Spreader only 5mm gap required. Comes in Compact or adaptor.
Ideal tool for removing conveyor drive gearboxes. Disc Extractor removing sprocket off shaft, while pushing against the shaft (demo / movie available on our website).
Compact Bearing Puller 2 or 3 leg clamps
Low Height Compact Jacks 43mm height for 10 tonne or 52mm height for 22 tonne
Use the Compact Extention or Straightening Kit. 15 tonne rating with extensions up to 2 metres 3.5 metres Cylinder, hose and pump and steel off cuts used for straightening, or...
Compact Nut Splitter
Sometimes off centre loading is unavoidable, but this is no problem with Simson s high quality jacks.
Purpose Built Compact Tools can be designed and built to customers requirements.
Do you have maintenance costs and reliability issues associated with the pumps, cylinders, hoses and fittings?
Image taken from http://www.dpi.nsw.gov.au/ data/assets/pdf_file/0003/84504/fipresentation.pdf With safety concerns of high pressure hydraulic hose incidents in mining (and heavy industry sectors) for 2,500 psi & 10,000 psi hydraulic hoses, doesn t it makes sense to move to the compact jack where ever possible, which eliminates the 10,000 psi rated hose?
Simson Purpose Built Lifting Solutions 3.5 metres
Customised synchrolift solution
Heavy Duty Locknut cylinders
South Korean shipbuilders are one of the largest users of leak free, reliable compact jacks and aluminium cylinders.
Simson heavy lift jacks used in ship building industry
Big or small, low height to super lift. We can help you with your lifting requirements.
Simson s high quality aluminium alloy cylinders are the highest quality aluminium cylinders in the market place.
Quality Manufacturing of Simson Power Tools
Manufactured in Europe to the highest standards.
Piston is a special, long life, roller bearing steel, which is through hardened to 56 HRc.
Cylinder is dropped forged, hardened steel with roller polish surface.
Rigid quality control (using micrometers) to ensure the cylinder will provide trouble free operational life.
High quality precision machined part, which is why Simson is the only cylinder/jack supplier that can guarantee 3 years warranty on materials and workmanship
Understanding the quality in the manufacturing process demonstrates why the Simson Jacks do not seize under off centre loads and are more reliable.
The same high quality goes into the Simson cylinders and the Compact Jacks.
Heavy Lift Jacks for Mining Vehicles and Locomotives Australian Designed and Built
Heavy Lift Jacks for surface and underground mining vehicles. Capacity from 25 to 150 tonnes.
Low Height Telescopic Jack Standard Jack Standard and low height telescopic Jacks for underground vehicles and other low profile vehicles.
Floor Stands and hand trucks to move around the Jack stands.
So please contact Henry or Steve today to assist you with your innovative and highly reliable Hydraulic lifting requirements. Ph 02 8801 9000 simson@bakerprovan.com.au www.bakerprovan.com.au