PUNCHING DRILLING CUTTING www.alfratools.com DEBURRING PUNCHING DRILLING CUTTING DEBURRING LIFTING TML
Metal Core Drilling RB 35 X RB 35 SP RB 50 SP Ø 7/16" - 1-1/2"; 12-35 mm Cutting Depth: up to 2"; 50 mm Twist Drill: Ø 3/64" - 1/2"; 1-13 mm Countersinking: Ø 7/16" 1-9/16"; 10-40 mm 1100 W Single-Speed Gearbox: 450 rpm Arbor: 3/4"; 19 mm Weldon Shank Coolant Supply: integrated, automatic Stroke: 4-3/4"; 120 mm 110 V, 60 Hz Tool Force / magnetic holding force: 472 lbs/2,023 lbs on 3/8" plate Magnet Foot: 2-3/4" x 6"; 70 x 185 mm 25 lbs; 10.6 kg V32 18700.110.UL Cutting depth: Twist Drill: Countersinking: Ø 1/2" - 1-1/2"; 12-35 mm up to 2"; 50 mm Ø 1/32" - 1/2"; 1-13 mm Ø 7/16" - 1-5/8"; 10.0-40.0 mm 1.100 W Single-Speed Gearbox: 450 rpm Arbor: 3/4"; 19 mm Weldon Shank Coolant Supply: integrated, automatic Motor: height adjustable 110 V 50/60 Hz Tool Force / magnetic holding force: 606 lbs on 3/8" standard steel 517 lbs on 1/4" standard steel Magnet foot: 2-13/16" x 7-1/2"; 72 x 190 mm Stroke: 4-1/8"; 105 mm 22 lbs; 9.9 kg 18801.WD.110.UL HSS Cutter Sets Cutting depth: Twist Drill: Countersinking: Ø 1/2" - 2"; 12-50 mm up to 2"; 50 mm Ø 1/32" - 3/4"; 1-20 mm Ø 7/16" - 1-5/8"; 10.0-40.0 mm 1.200 W 2-Speed Gearbox: 250 / 450 rpm Tool holder: MT2 Motor: height adjustable 110 V 50/60 Hz Tool Force / magnetic holding force: 517 lbs on 3/8" standard steel 449 lbs on 1/4" standard steel Magnet foot: 2-13/16" x 7-1/2"; 72 x 190 mm Stroke: 3-1/8"; 100 mm 24 lbs; 11.5 kg 18851.110.UL Magnetic Pick Up Sticks HSS Basic 6pc. Silver Cutter Kit 1" 6 pc. Cutter Set: Includes 1 ea. of Ø 9/16", 5/8", 11/16", 13/16", 15/16", 1 1/16" Ø 12.0-14.0-16.0-18.0-20.0-22.0 mm in solid plastic case Includes 1 ejector pin 1926500 Cutting Depth: Countersinking: 1-speed gearbox: Tool Holder: Cooling: Magnet Foot: Magnet adhesion: Height: Power cord: Ø 7/16" - 1-1/4"; 12.0-32.0 mm 1"; 25.0 mm Ø 3/8" - 1-1/4"; 10.0-32.0 mm 900 W 450 rpm 3/4"; 19 mm Weldon shank internal, automatically through the spindle 110 Volt or 230 Volt 3-3/4" x 7-7/8"; 95 x 200 mm (rigid) 3600 lbs; 16000 N 9"/7"; 227/185 mm 3.0 m 27.5 lbs 12.5 kg HSS Basic 6pc. Silver Cutter Kit 2" 190601 6 pc. Cutter Set: Includes 1 ea. of Ø 9/16", 5/8", 11/16", 13/16", 15/16", 1 1/16" Ø 12.0-14.0-16.0-18.0-20.0-22.0 mm in solid plastic case Includes 1 ejector pin 1926500 Magnetic Pick Up Stick, Length 15-6/8" 400 mm This item contains a moveable magnet in a stainless steel shaft. Push the shaft in to pick up material. Pull the shaft out to release the material. 18710.110 190602 18654
Drilling and Lifting HSS-Co Annular Cutters Tungsten Carbide Cutters TCT Hole Saws HSS ALFRA USA Black Line cutters Available in over 100 stock sizes from 7/16" x 1" DOC to 2-3/8 x 2" DOC. TCT Annular Cutters in over 70 sizes from ½" to 2" diameters HSS ALFRA USA Silver Line cutters Available in over 80 sizes from 7/16" x 1" to 2-3/8" x 2" DOC. TCT Strong Construction cutter in over 90 sizes for large diameter (2" x 2" to 4" x 4") hole making TCT Hole Saws ALFRA manufactures the largest range of TCT Hole Saws in four types with over 450 sizes available in metric and fractional. Excellent for drilling all steels, especially stainless steels. 250 500 Key Facts TML 250: Up to 250 kg holding force at 10 mm material thickness and 90 kg holding force already at 3 mm material thickness (The stated performance adds a safety-factor of 3 for the lifting operation. This means, that the tear-off force needs to be three times the maximal holding force.) Outstanding performance on thin walled materials (already applicable at 1 mm) Weight reduction of 70% at same holding force Effortless and ergonomical one-lever magnet activation Revolutionary magnetic technology allows for a much wider range of lifting solutions 360 rotating lifting hook TiN-coated, hardened steel magnetic adhesive surface Technical Data TML 250: 3,5 kg Up to 750 kg max. holding force Max load: up to 250 kg (1:3 Safe working load) Length: 240 mm (closed lever), Width: 91 mm, Height: 191 mm (open lever) Magnetic contact surface: Length: 135 mm, Width: 65 mm 41250 Key Facts TML 500: 300 kg holding force already at 5 mm material thickness and 490 kg holding force at 10 mm material thickness and (The stated performance adds a safety-factor of 3 for the lifting operation. This means, that the tear-off force needs to be three times the maximal holding force.) Outstanding performance on thin walled materials (already applicable at 1 mm) Weight reduction of 70% at same holding force (than competitive magnets) Effortless and ergonomical one-lever magnet activation Revolutionary magnetic technology allows for a much wider range of lifting solutions 360 rotating lifting hook TiN-coated, hardened steel magnetic adhesive surface Technical Data TML 500: 7,3 kg Up to 1.500 kg max. holding force Max load: up to 500 kg (1:3 Safe working load) Length: 295 mm (closed lever), Width: 118 mm, Height: 216 mm (open lever) Magnetic contact surface: Length: 185 mm, Width: 88 mm 41500 TMC 300 - Magnet Base: TML 100 Lifting Magnet TMH 50 - Hand Lifting Magnet Key Facts TMC 300 as Magnet Base: Up to 300 kg holding force, even on a steel plate of only 6 mm thickness Ergonomic and easy one-hand actuation M5 and M6 tapped holes on the top as well as on the sides enable an easy attachment Technical data TMC 300: Only 1 kg Tear-off force: 300 kg (at a 6 mm thick steel sheet S 235) Length: 82.5 mm, Width: 80 mm, Height: 32.5 mm 41100 Key facts TMH 50 Hand Lifting Magnet: Max. lifting capacity: 50 kg (even from 3 mm sheet metal S235) Protects hands and fingers from hot and sharp steel Technical data TMH 50 Hand Lifting Magnet: 1.6 kg Max. lifting capacity at vertical lifting: 50 kg Length: 126 mm, Width: 80 mm, Height: 100 mm; with handle: Length: 190 mm, Width: 124 mm 41100.H TMA 300 Variable Welding Angle Key facts TML 100 Lifting Magnet: Max. lifting capacity of 50 kg at 3 mm material thickness and 100 kg lifting capacity from 6 mm (at safety factor 1:3) Outstanding performance on thin walled materials 360 rotating and swiveling hook (also at maximum load) Technical data TML 100 Lifting Magnet: 1.7 kg; Tear-off force: 300 kg (from 6 mm sheet metal S235) Length: 82.5 mm, Width: 80 mm, Height: 85 mm 41100.L Key facts TMA 300 Hand Lifting Magnet: Stepless adjustable angle side plates from 0 to 90 to hold/weld worksheets Invaluable for anyone, who has to weld together heavy worksheets in different angles Light-weighted, easy and trouble-free handling Technical data TMA 300 Hand Lifting Magnet: 2.7 kg Tear-off force: 300 kg (at 6 mm steel sheets S235) Length: 162 mm, Width: 124 mm, Height: 223 mm 41100.A
Cutting and Punching VS Step drills AKKU Battery Packed Hydraulic Punch Gun Standard, Tristar, Tristar Plus S punch and dies AKKU battery packed hydraulic punch combo kit (includes kit w/ carry case, accessories, 2 battery packs and 6 sets of ALFRA TRISTAR punch and dies sizes 1/2", 3/4", 1", 1-1/4", 1-1/2" and 2") 02075.120v VS1 Multi Step Drill 1/8-1/2" TiN-Coated VS2 Multi Step Drill 1/2-1" TiN-Coated VS3 Multi Step Drill 1/4-3/4" TiN-Coated VS4 Multi Step Drill 3/16-1/2" TiN-Coated VS7 Multi Step Drill 7/8" TiN-Coated VS8 Multi Step Drill 3/16-7/8" TiN-Coated VS11 Multi Step Drill 7/8-1-1/8" TiN-Coated VS12 Multi Step Drill 7/8-1-3/8" TiN-Coated AKKU battery packed hydraulic Scope of supply: ALFRA battery packed compact hydraulic punch carry case, accessories, 2 battery packs 02070.120v Call your local distributor to receive competitive pricing. ALFRA Busbar Bending and Punching Machine BS 160 Key Facts BS 160: The machine comprises a main frame made of special aluminium and a hydraulic cylinder up to 600 bar. By means of the bending bars R=11 mm and R=5 mm and a height adjustment feature, all busbars up to max. 160 mm width can be bent in different angles. The angle scale is engraved in the upper section. Conversion from bending to punching is simple and easy. ALFRA BS 160 with bending die 03258 and bending punch R=11 mm for busbar 9-12 mm Bending: Cu max.: 160 x 12 mm Bending angle up to: 92 Smallest leg length: 50 mm inside dimension Smallest U-bending: 160 mm inside dimension Smallest Z-bending: 55 mm (depending on material) inside dimension Punching: Punching Cu max.: Recommended type of drive: Ø 6.6-21.5 mm including oblong holes up to max. L = 21 mm Material thickness Cu max.: 12 mm Material width up to: 160 mm centric Dimensions L x W x H: 390 x 150 x 330 mm 20 kg Electro-hydraulic pump AHP 03-1 03853 Punches and dies available Punch Ø mm Metric screw connection 6.6 x 6.0 up to 5 mm material thickness 03204 9.0 x 8.0 up to 6 mm material thickness 03205 9.5 x 8.0 up to 6 mm material thickness 03206 11.0 x 10.0 up to 12 mm material thickness 03207 11.5 x 10.0 up to 12 mm material thickness 03208 13.5 x 12.0 up to 12 mm material thickness 03209 14.0 x 12.0 up to 12 mm material thickness 03210 17.5 o 16.0 up to 12 mm material thickness 03211 18.0 o 16.0 up to 12 mm material thickness 03212 21.0 o 20.0 up to 12 mm material thickness 03213 21.5 o 20.0 up to 12 mm material thickness 03214 x with neoprene stripper and pressure plate o with neoprene stripper without pressure plate Dies -S- Dies -L- max. mat. thickness max. mat. thickness 6.6 5 03215 6.6 5 03230 9.0 5 03216 9.0 6 03231 9.5 5 03217 9.5 6 03232 11.0 5 03218 11.0 12 03233 11.5 5 03219 11.5 12 03234 13.5 5 03220 13.5 12 03235 14.0 5 03221 14.0 12 03236 17.5 5 03222 17.5 12 03237 18.0 5 03223 18.0 12 03238 21.0 5 03224 21.0 12 03239 21.5 5 03225 21.5 12 03240 Punches and dies for oblong holes up to Prod.-No max. L x W = 21 x 18 mm up to 5 mm material thickness 03226 up to 12 mm material thickness 03241
Sawing 9" RotaSpeed ALFRA Circular Saw RotaDry 355 14" Saw Powerful 1800 watt motor Double insulated Oil bath gear case Lower guard lever Chip collector cover one knob removal The new worm drive metal cutting saw cuts longer and farther with high torque output. Power: 1800 watts, 15 amps 110-120V 50/60HZ Speed: 2300 rpm Arbor: 1" Blade Diameter: 9" Mitre: 0-45 Cutting capacity at 0 : 3-1/4" Cutting capacity at 45 : 2-1/4" 18 lbs Sound power: 95.5 db Sound pressure: 93.8 db 22412.110 Most rugged and versatile 14" saw available on the market today Cold cutting Safety trigger switch Large capacity chip tray Large heavy duty base Power: 1400 watts, 13 amps 110-120V 50/60HZ Speed: 3800 rpm Arbor: 20 mm Blade Diameter: 7-1/4" Mitre: 0-45 Cutting capacity at 0 : 2-3/8" Cutting capacity at 45 : 1-9/16" 15 lbs Sound power: 98.0 db Sound pressure: 88.0 db RD355 ALFRA USA offers XT German Quality Circular Saw Blades Description 22205 7" Steel Bld, 2.2/2.6 w/20mm arbor, 34T 22206 7" Aluminum Bld, 2.8/2.0 20mm arbor, 48T 22255 8" Steel Bld, 2.0/1.6 w/15.875 arbor, 42T 22256 8" Aluminum, 2.8/2.0, w/20mm arbor, 54T 22305 9" Steel, 2.0/1.6, w/1" arbor, 48T 22306 9" Aluminum, 2.8/2.2, w/1" arbor, 62T 32108 14" Steel, 2.6/2.2 w/1" arbor, 72T
Punching APS APS Punches Double Action ALFRA-Press APS 70 APS 120 Max. hole Ø mm 7/8" 22 mm 1-1/16" 27 mm Oblong holes max. 7/8" x 9/16" 22 x 14 mm 1" x 11/16" 25 x 18 mm Max. material thickness when 1/2" 13 mm 5/8" 16 mm working on St. 42 Total punching time with Pump SC 05 II-B 10 sec. 15 sec. with Pump SC 17 5 sec. 8 sec. Throat depth 2-3/4" 70 mm 4-3/8 " 110 mm Max. pressure 10150 psi 10150 psi Punching power 30 t 44 t Punch stroke 11/16" 18 mm 25/32" 20 mm Weight 66 lbs 29.9 kg 104 lbs 47.3 kg 23002 23004 Contents include: Punching Unit, control cable and hydraulic hose 16 ft, wrench, depth fence, suspension hook ALFRA-Press Max. hole Ø mm Max. oblong holes Max. material thickness when working on steel 42 Total punching time with pump SC 17-D Throat depth Max. pressure Punching power Punch stroke Weight APS 110D 1-1/16" 27 mm 1" x 11/16" 25 x 18 mm 5/8" 16 mm 8 sec. 4-3/8" 110 mm 10150 psi 44 t 25/32" 20 mm 85 lbs 38.5 kg 23181 Contents include: APS 110 D Punching Unit, control cable and hydraulic hose 16 ft, wrench, depth fence, suspension hook. SC 17D - for APs 110D Working pressure max. Pump capacity 1653.1 lbs/cm 2 750 kg/cm 2 (10670 psi) 0.43 Gal/min at 1370 rpm Oil quantity 4 1/2 Gal 17 l Single phase motor 1500 W 110v 60 HZ 1370 rpm Weight incl. oil 45 kg and transport rollers 148 lbs 67 kg Dimensions (L x W x H) 23186.110 21-11/16" x 14-9/16" x 22-1/16" 550 x 370 x 560 mm Balancers Electro Hydraulic Pumps For ALFRA Press Hydraulic Punching Units With blocking device, spring fracture safety device, length of cable 6 ft 9363 B 44-55 lbs 20-25 kg 23151 9366 B 77-99 lbs 35-45 kg 23152 9367 B 99-121 lbs 45-55 kg 23154 according to EN 15112 Attention: Actuation of spring hoist only with suspended Punching Unit resp. under load. Punches and Dies Working pressure max. 1653.1 lbs/cm2 750 kg/cm 2 (10670 psi) SC 05 II-B for APs 70, 120 SC 17 for APs 70, 120 1653.1 lbs/cm2 750 kg/cm 2 (10670 psi) Pump capacity 0.2 Gal/min at 2770 rpm 0.43 Gal/min at 1370 rpm Oil quantity 1 1/3 Gal 5 l 4 1/2 Gal 17 l Single phase motor 2770 rpm 1100 W 110v 60 HZ 1500 W 110v 60 HZ Weight incl. oil and roll bar 62.2 lbs 28.2 kg 141 lbs 64 kg Dimensions (L x W x H) 21-11/16" x 14-9/16" x 22-1/16" 550 x 370 x 560 mm 23007.110 23170.110 Subject to our general sales conditions. Accessories for APS 70/120 Punches Dies Size Size 3/8 23-01-10 3/8 23-02-10 ½ 23-01-12 ½ 23-02-12 9/16 23-01-14 9/16 23-02-14 5/8 23-01-16 5/8 23-02-16 18 mm 23-01-18 18 mm 23-02-18 15/16 23-01-20 15/16 23-02-20 7/8 23-01-22 7/8 23-02-22 Distributor Info: 06/2015