IP Phone Manager for MH240 Operation Manual A50-017160-001 Issue1.0, January 2009
LIABILITY DISCLAIMER NEC Infrontia Corporation reserves the right to change the specifications, functions, or features, at any time, without notice. NEC Infrontia Corporation has prepared this document for use by its employees and customers. The information contained herein is the property of NEC Infrontia Corporation and shall not be reproduced without prior written approval from NEC Infrontia Corporation. All brand names and product names on this document are trademarks or registered trademarks of their respective companies. Copyright 2009 NEC Infrontia Corporation
Table of Contents 1. INTRODUCTION...1 1.1. Function...1 1.2. Connection procedure...1 1.3. Security...1 1.4. About PC environment...1 2. INSTALLATION...2 2.1. System requirements...2 2.2. Installation file...2 2.3. Operation necessary for installation...2 2.4. Installing IP Phone Manager for MH240...3 2.5. Uninstalling the IP Phone Manager for MH240...8 2.6. Update installation...9 3. OPERATING PROCEDURE...10 3.1. Operation/preparation of MH240...10 3.1.1. Opening of PC port...10 3.1.2. Connected procedure of USB cable...11 3.2. Start/End...12 3.2.1. Start...12 3.2.2. End...14 3.3. Menu...15 3.3.1. How to Change the Password...18 3.3.2. How to confirming version...18 3.4. Easy Setup...19 3.5. Terminal Setting Copy...25 3.6. Firmware Upload...29 3.6.1. Firmware Upload (IP Connection)...29 3.6.2. Firmware Upload (USB Connection)...34 3.7. Other Setting Upload/Download...38 3.7.1. Other Setting Upload/Download (IP Connection: Upload/Download Both)...38 3.7.2. Other Setting Upload/Download (IP Connection: Upload)...41 3.7.3. Other Setting Upload/Download (IP Connection: Download)...43 3.7.4. Other Setting Upload/Download (USB Connection: Upload/Download Both)...45 3.7.5. Other Setting Upload/Download (USB Connection: Upload)...47 3.7.6. Other Setting Upload/Download (USB Connection: Download)...50 3.8. Directory Setting...52 3.8.1. Directory Setting (Edit data)...53 3.8.1.1. Directory Setting (Directory Setting)...53 3.8.1.2. Directory Setting (Directory group)...55 3.8.2. Directory Setting (Read/ Transfer)...57 3.8.2.1. Directory Setting (IP Connection: Read)...57 3.8.2.2. Directory Setting (IP Connection: Transfer)...60 3.8.2.3. Directory Setting (USB Connection: Read)...64 3.8.2.4. Directory Setting (USB Connection: Transfer)...67
3.8.3. Directory Setting (Import/Export)...70 3.8.3.1. Directory Setting (Import)...70 3.8.3.2. Directory Setting (Export)...70 3.9. User Setting...71 3.9.1. User Setting (Edit data)...71 3.9.1.1. User Setting (Normal Stetting: Incoming Call Setting)...72 3.9.1.2. User Setting (Normal Stetting: Talk Setting)...73 3.9.1.3. User Setting (Normal Stetting: Display Setting)...74 3.9.1.4. User Setting (Normal Stetting: Key Setting)...75 3.9.1.5. User Setting (Normal Stetting: Other Setting)...76 3.9.1.6. User Setting (Administrator Stetting: RTP Setting/Audio Setting)...77 3.9.2. User Setting (Read/Transfer)...78 3.9.2.1. User Setting (IP Connection: Read)...78 3.9.2.2. User Setting (IP Connection: Transfer)...80 3.9.2.3. User Setting (USB Connection: Read)...83 3.9.2.4. User Setting (USB Connection: Transfer)...86 3.9.3. User Setting (file open/file save)...90 3.9.3.1. User Setting (file open)...90 3.9.3.2. User Setting (file save)...90 3.10. Network Setting...91 3.10.1. Network Setting (Edit data)...91 3.10.1.1. Network Setting (Connection Target Setting)...92 3.10.1.2. Network Setting (Wireless Setting)...93 3.10.1.3. Network Setting (SIP Setting)...94 3.10.2. Network Setting (Read/Transfer)...95 3.10.2.1. Network Setting (IP Connection: Read)...95 3.10.2.2. Network Setting (IP Connection: Transfer)...98 3.10.2.3. Network Setting (USB Connection: Read)...102 3.10.2.4. Network Setting (USB Connection: Transfer)...105 3.10.3. Network Setting (file Open/file Save)...109 3.10.3.1. Network Setting (file Open)...109 3.10.3.2. Network Setting (file Save)...109 3.11. Master Password Confirmation...110 3.12. Terminal Initializing...113 3.12.1. Terminal Initializing (IP Connection/ USB Connection)...114 3.12.2. Terminal Initializing (IP Connection)...115 3.12.3. Terminal Initializing (USB Connection)...119 3.13. USB Connection Check...123 3.14. Certificate Convert Tool...125 3.14.1. CA Certificate...125 3.14.2. User Certificate/Private Key...126 4. Others...127 4.1. Troubleshooting...127 4.2. About the CSV file read by the terminal retrieval when IP is communicated...127
1. INTRODUCTION This manual explains the general information of IP Phone Manager for MH240 for the Maintenance tool of MH240. IP Phone Manager for MH240 is application software installed in PC. IP Phone Manager for MH240 communicates with MH240 by the IP communication or the USB communication. IP Phone Manager for MH240 can write / read of the setup information of MH240, and can upload the firmware of MH240. 1.1. Function IP Phone Manager for MH240 supports the following functions. Easy Setup Terminal Setting Copy Firmware Upload Other Setting Upload / Download Directory Setting User Setting Network Setting Master Password Confirmation Terminal Initializing USB Connection Check Certificate Convert 1.2. Connection procedure IP Phone Manager for MH240 supports the following two types of connection procedures. -IP communication MH240 can be communicated with PC that installed IP Phone Manager for MH240 by way of wireless LAN. -USB communication MH240 can be communicated with PC that installed IP Phone Manager for MH240 by way of USB. 1.3. Security The login operation by account/password is necessary to start MH240. Moreover, the function that can be operated by the authority of each account supported as follows is different. -Constructor account -Administrator account -User account 1.4. About PC environment PC that installs IP Phone Manager for MH240 requires the following specs. -OS *1: Windows XP SP2 or higher -Display resolution: 1024 dots wide x 768 dots high or higher -Interface: USB port (compliant to Universal Serial Bus Specification Rev1.1)/ Network port *1 The operations on Windows Vista (Japanese) are not guaranteed. 1
2. INSTALLATION 2.1. System requirements PC that installs IP Phone Manager for MH240 requires following. It is PC in which WindowsXP SP2 is installed. -When Microsoft VisualC++ 6.0 is installed, uninstall it in advance. -FTP Server is not started. -The FTP server tool (Filezilla) used in IP Phone Manager for MH240 is not installed. 2.2. Installation file Prepare the following files to install IP Phone Manager for MH240. -IP Phone Manager for MH240_Setup-x.x.x.x.exe (x.x.x.x: It is changeable according to the software version.) 2.3. Operation necessary for installation The installation of IP Phone Manager for MH240 is operated as follows. -Installation of IP Phone Manager for MH240 that executes installation file -Block release of file transmission/reception of FTP with anti-virus software -Installation of USB device driver 2
2.4. Installing IP Phone Manager for MH240 Install IP Phone Manager for MH240 according to the following procedures. Step1. Start up IP Phone Manager for MH240_Setup-x.x.x.x.exe Step2. Select Installer Language of IP Phone Manager for MH240, and click OK. Select Installer Language of IP Phone Manager for MH240. When OS is an English version, only English can be selected. -Japanese -English Step3. When the Setup Wizard screen appears, click Next. 3
Step4. Checking I accept the terms in the License Agreement., and click "Next". Step5. Checking all of Select components to install, and click "Next". 4
Step6. Click Browse and select the folder that install IP Phone Manager for MH240, and click Install. Step7. When the Installation Complete screen appears, click Next. 5
Step8. Click Finish in Finish screen. -The shortcut icons of IP Phone Manager for MH240 and CertConv (Certificate Convert Tool) are created in desktop. - IP Phone Manager for MH240 and CertConv (Certificate Convert Tool) are registered in the start menu. 6
Step9. The block of transmission/reception of the file by the FTP with the anti-virus software is released. Please set it according to the operation of the anti-virus software installed in PC. (Explaining as follows in the case of "McAfee VirusScan Enterprise" as an example.) (1) Right-click the McAfee VirusScan Enterprise" icon in the task-tray located at the bottom-right of the desktop and click VirusScan console. (2) When the VirusScan console screen appears, and double-clicking Access security. (3) When the Property of access security screen appears, and clicks the Port block tab. (4) The following checks on two places in the Blocked port column are removed. -The FTP reception is prohibited. -The FTP transmission is prohibited. (5)Click OK, and applied. Step11. The device driver is installed. After IP Phone Manager for MH240 starts, this operation is done. When the USB cable is connected first after IP Phone Manager for MH240 is started, the driver's installation is demanded by Windows. Please select "Software is automatically installed" according to the instruction of the Windows side. 7
2.5. Uninstalling the IP Phone Manager for MH240 Step1. Open Start -> All programs -> IP Phone Manager for MH240 -> Uninstall Step2. Click Yes. Step3. Click Close. Step4. Click OK. 8
2.6. Update installation Step1. IP Phone Manager for MH240_Setup-x.x.x.x.exe is executed. Please execute uninstallation when IP Phone Manager for MH240 with an old version is installed. Next, the installation is executed. Please refer to the chapter of 2.4. IP Phone Manager for MH240 and the chapter of 2.5. Uninstalling the IP Phone Manager for MH240 for the operating procedure. 9
3. OPERATING PROCEDURE 3.1. Operation/preparation of MH240 IP Phone Manager for MH240 v0.32.0.0 supports MH240 v00.43.00 or later. MH240 communicates with PC that installed IP Phone Manager for MH240 by way of wireless LAN. 3.1.1. Opening of PC port Please open the PC port of MH240 to be communicated to IP/USB communication in IP Phone Manager for MH240. (1) When IP communication, the state of the PC port can be confirmed by listing the terminal retrieval result in IP Phone Manager for MH240. (2) Open/Close of the PC port can be operated from the setting of MH240. Press the MENU key of MH240, and MH240 displays the main menu. Select Menu -> 5.Setting -> 3.Maintenance -> 3.PC Port. Select 2.Open and then press the OK soft key. 10
3.1.2. Connected procedure of USB cable Please do the following operation before MH240 and the USB cable connect it when USB communication from IP Phone Manager for MH240. (1) Press the MENU key of MH240, and MH240 displays the main menu. Select Menu -> 5.Setting -> 3.Maintenance -> 4.USB Connect, and then press the OK soft key. (2)Press "OK" key on the Please pull out the USB cable. screen before the USB cable is connected. (3)Press OK key on the Please connect the USB cable. screen, after the USB cable is connected. 11
3.2. Start/End 3.2.1. Start Step1. IP Phone Manager for MH240 is started from the IP Phone Manager for MH240 icon or the start menu in desktop. Step2. Select the account logged in, and input the password, and click OK. Input the password that set password of each account. Constructor password: superuser (temporary) Administrator password: adminuser (temporary) User password: normaluser (temporary) Step3. When the Start FTP Server screen appears, click OK. 12
Step4. The menu of each account is displayed. The following are the menu of the Constructor account displays. 13
3.2.2. End Step1. Click Exit in Terminal Setting Menu. Step2. Click OK in Exit screen. Step3. When the Exit FTP Server screen appears, click OK. 14
3.3. Menu Each button of the menu is selected, and it changes to the screen where each function of IP Phone Manager for MH240 is executed. The function of each account that can be executed is different. Menu for the constructor account Easy Setup Terminal Setting Copy Firmware Upload Other Setting Upload/Download Directory Setting User Setting Network Setting Master Password Confirmation Terminal Initializing USB Connection Check Exit 15
Menu for the administrator account Easy Setup Terminal Setting Copy Firmware Upload Other Setting Upload/Download Directory Setting User Setting Network Setting Terminal Initializing USB Connection Check Exit 16
Menu for the user account Easy Setup Other Setting Upload/Download Directory Setting User Setting Terminal Initializing USB Connection Check Exit 17
3.3.1. How to Change the Password Step1. Select File(F) -> Change Password(P) on the top menu. Step2. Enter the current password in Password text box, and enter the new password in New password and Confirm Password text boxes, and click OK. 3.3.2. How to confirming version Step1. Select Help(H) -> About(A) on the top menu. Step2. Confirm the version information of the IP Phone Manager for MH240. 18
3.4. Easy Setup Minimum terminal information that enables the communication of MH240 is set. It is possible to execute it only by USB connection. Step1. Click Easy Setup in Menu of IP Phone Manager for MH240. Step2. Input the necessary items on the Easy Setup screen. Connection Type: Input example when DHCP is selected 19
Connection Type: Input example when Fixed IP is selected 20
Step3. After confirming a set content, click Start. 21
Step4: After connecting MH240 and USB, click Start. Please refer to 3.1.2. Connected procedure of USB cable. 22
Step5. The completion screen is displayed. If you restart MH240 to reflect the setting, click Restart. Restart -----------MH240 is restarted. Finish ------------It returns to the IP Phone Manager for MH240 menu. View Report ----The report is displayed. 23
When View Report is selected, the following are displayed. Export -----------Setup result is exported as csv file. 24
3.5. Terminal Setting Copy You can copy terminal setting of MH240 to another terminal. Step1. Click Terminal Setting Copy in Menu of IP Phone Manager for MH240. Step2. After connecting the copy source terminal by USB cable, click Start. Please refer to 3.1.2. Connected procedure of USB cable. 25
Step3. After connecting the copy destination terminal by USB cable, click Start. Please refer to 3.1.2. Connected procedure of USB cable. 26
Step4. After input the copy destination terminal password, click Start. Step5. Click Finish in Finish screen. 27
Restart -----------MH240 is restarted. Finish ------------It returns to the IP Phone Manager for MH240 menu. Check Data -----Verify copy data and MH240 data. When Check Data is selected, the following are displayed. Restart -----------MH240 is restarted. Finish ------------It returns to the IP Phone Manager for MH240 menu. 28
3.6. Firmware Upload You can upload the firmware to MH240. It is possible to execute it with IP Connection/USB Connection. Firmware that can be renewed in IP Phone Manager for MH240 is the following two files. Boot file--- boot2nand.boot_img Program file---mh240_xx.bin (xx: na / ph / at) Case of IP Connection, two or more MH240 that updates it can be specified. Case of USB Connection, MH240 can be continuously renewed though one is updated. 3.6.1. Firmware Upload (IP Connection) Step1. Click Firmware Upload in Menu of IP Phone Manager for MH240. Step2. Check IP and click Next. 29
Step3. Click Browse button and then specify the upload file. Or, enter the upload file information in full path in the text box. And Click Next. 30
Step4. Checking the MH240 to which the file will be uploaded, into the terminal search result, and click Next. Two or more the MH240 to which the file will be uploaded, by checking the list can be selected. Search ----------All MH240 the search results of the connection on the network are displayed. Direct -----------The search results of the searched IP address was specifying input are displayed. Import -----------The search results of the searched IP address was reading from CSV are displayed. Export -----------The search results is exported as CSV file. Open PC Port ---Open the PC port of the checked MH240. Close PC Port ---Close the PC port of the checked MH240. Select All --------All MH240 displaying it in the list is selected. Clear All ---------All MH240 displaying it in the list is not selected. Back --------------Return to previous screen. Cancel ------------Return to Menu. 31
Step5. Set the Option, and click Upload. When you upload it at once: The check of the Start Time/End Time is removed. When you schedule uploading: Check Schedule setting (Start Time/End Time) as required. When you specify the retrying times: Check Retry setting as required. 32
Step6. After seeing the upload result, and click Finish. 33
3.6.2. Firmware Upload (USB Connection) Step1. Click Firmware Upload in Menu of IP Phone Manager for MH240. Step2. Check USB and click Next. 34
Step3. Click Browse button and then specify the upload file. Or, enter the upload file information in full path in the text box. And Click Next. 35
Step4. Connect MH240 and the USB cable, and click Start. Please refer to 3.1.2. Connected procedure of USB cable. 36
Step5. After seeing the upload result, click Finish or Continue. Finish --------It returns to the IP Phone Manager for MH240 menu. Continue ----When you upload to other MH240, you click. 37
3.7. Other Setting Upload/Download Upload or Download the other setting of MH240. It is possible to execute it with IP Connection/USB Connection. The set up information that becomes an object can be preserved in PC. The set up information that becomes an object is as follows. Information downloaded or uploaded by the account authority is different. Call Log (calls_data): Constructor/ Administrator/ User Ring Tone (Download1.wav, Download2.wav and/or Download3.wav): Constructor/ Administrator/ User Certificate (cacrt.pem, usercrt.pem and/or userkey.pem): Constructor/ Administrator Log (log.cfg, messages and/or messages.0): Constructor/ Administrator Tone (/tone): Constructor 3.7.1. Other Setting Upload/Download (IP Connection: Upload/Download Both) Step1. Click Other Setting Upload/Download in Menu of IP Phone Manager for MH240. Step2. Check IP and click Next. 38
Step3. Click Browse button and then specify the directory or enter in the text box, and click Next. Step4. Check the target items and click Next. 39
Step5. Checking the MH240 to which the file will be uploaded, into the terminal search result, and click Next. One MH240 by checking the list can be selected. Search ----------All MH240 the search results of the connection on the network are displayed. Direct -----------The search results of the searched IP address was specifying input are displayed. Import -----------The search results of the searched IP address was reading from CSV are displayed. Export -----------The search results is exported as CSV file. Open PC Port ---Open the PC port of the checked MH240. Close PC Port ---Close the PC port of the checked MH240. Select All --------All MH240 displaying it in the list is selected. Clear All ---------All MH240 displaying it in the list is not selected. Back --------------Return to previous screen. Cancel ------------Return to Menu. 40
3.7.2. Other Setting Upload/Download (IP Connection: Upload) Step1. After confirming a set content, click PC to MH240. Step2. After input the password of the target MH240, and click Start. 41
Step3. After seeing the Completion screen, click Finish or Restart. When you restart MH240 to reflect the setting, and click Restart. Restart ---MH240 is restarted. Finish ----It returns to the IP Phone Manager for MH240 menu. 42
3.7.3. Other Setting Upload/Download (IP Connection: Download) Step1. After confirming a set content, click MH240 to PC. 43
Step2. After seeing the Completion screen, click Finish. Finish ----It returns to the IP Phone Manager for MH240 menu. 44
3.7.4. Other Setting Upload/Download (USB Connection: Upload/Download Both) Step1. Click Other Setting Upload/Download in Menu of IP Phone Manager for MH240. Step2. Check USB and click Next. Step3. Click Browse button and then specify the directory or enter in the txet box, and click Next. 45
Step4. Check the target items and click Next. 46
3.7.5. Other Setting Upload/Download (USB Connection: Upload) Step1: After connecting MH240 and USB, click PC to MH240. Please refer to 3.1.2. Connected procedure of USB cable. 47
Step2. After input the password of the target MH240, and click Start. 48
Step3. After seeing the Completion screen, and click Finish, Restart or Continue. When you restart MH240 to reflect the setting, and click Restart. Restart -----MH240 is restarted. Continue -- When you download to other MH240, you click. Finish ------It returns to the IP Phone Manager for MH240 menu. 49
3.7.6. Other Setting Upload/Download (USB Connection: Download) Step1: After connecting MH240 and USB, click MH240 to PC. Please refer to 3.1.2. Connected procedure of USB cable. 50
Step2. After seeing the Completion screen and click Finish or Continue. Continue -- When you download to other MH240, you click. Finish ------It returns to the IP Phone Manager for MH240 menu. 51
3.8. Directory Setting Read/Edit/ Transfer the directory set up information of MH240 (Directory/Directory group). It is possible to execute it with IP Connection/USB Connection. The directory set up information can be edited. The directory set up information can be read from MH240 or transfer to MH240. The directory set up information can be saved in a CSV file into PC, or the directory set up information can be read from a CSV file into PC, 52
3.8.1. Directory Setting (Edit data) 3.8.1.1. Directory Setting (Directory Setting) Step1. Click Directory Setting in Menu of IP Phone Manager for MH240. Setting the directory data The directory data can be edited directly from the list. Edit ----------Edit the data on the directory editor table. Delete -------The selected data is deleted. Delete All ---All data is deleted. Import -------The directory data was reading from CSV is displayed. Export -------The directory data is saved in a CSV file. Read ---------The directory data was reading from MH240 is displayed. Transfer -----The directory data transfers to MH240. Menu --------It returns to the IP Phone Manager for MH240 menu.. 53
The directory edit screen 54
3.8.1.2. Directory Setting (Directory group) Setting the directory group data The directory group data can be edited directly from the list. Edit --------Edit the data on the directory group editor table. Import -----The directory group data was reading from CSV is displayed. Export -----The directory group data is saved in a CSV file. Read -------The directory group data was reading from MH240 is displayed. Transfer ---The directory group data transfers to MH240. Menu ------It returns to the IP Phone Manager for MH240 menu.. 55
The directory group edit screen 56
3.8.2. Directory Setting (Read/ Transfer) 3.8.2.1. Directory Setting (IP Connection: Read) Step1. Click Read. 57
Step2. Check IP and click Next. Step3. Checking the MH240 to which the file will be uploaded, into the terminal search result, and click Next. One MH240 by checking the list can be selected. 58
Step4. Click Finish in Finish screen. Step5. Result is displayed. 59
3.8.2.2. Directory Setting (IP Connection: Transfer) Step1. Click Transfer. 60
Step2. Check IP and click Next. Step3. Checking the MH240 to which the file will be uploaded, into the terminal search result, and click Next. One MH240 by checking the list can be selected. 61
Step4. After input the password of the target MH240, and click Start. 62
Step5. After seeing the Completion screen and click Finish or Restart. When you restart MH240 to reflect the setting, and click Restart. 63
3.8.2.3. Directory Setting (USB Connection: Read) Step1. Click Read. 64
Step2. Check USB and click Next. Step3: After connecting MH240 and USB, click Next. Please refer to 3.1.2. Connected procedure of USB cable. 65
Step4. Click Finish in Finish screen. Step5. Result is displayed. 66
3.8.2.4. Directory Setting (USB Connection: Transfer) Step1. Click Transfer. 67
Step2. Check USB and click Next. Step3: After connecting MH240 and USB, click Next. Please refer to 3.1.2. Connected procedure of USB cable. 68
Step4. After input the password of the target MH240, and click Start. Step5. After seeing the Completion screen and click Finish or Restart. When you restart MH240 to reflect the setting, and click Restart. 69
3.8.3. Directory Setting (Import/Export) The directory set up information can be saved in a file into PC, or the directory set up information can be read from a file into PC. When you see Directory tab, the directory data can save and read. When you see Group tab, the directory group data can save and read. When you see Directory tab and Group tab, you can be saved and read by Import / Export button. 3.8.3.1. Directory Setting (Import) Step1. Select File(F) -> Open(O) on the top menu bar. It is possible to operate it from the icon of the toolbar. 3.8.3.2. Directory Setting (Export) Step1. Select File(F) -> Save(S) on the top menu bar. It is possible to operate it from the icon of the toolbar. 70
3.9. User Setting Read/Edit/Transfer the user setting information of MH240 It is possible to execute it with IP Connection/USB Connection. The user setting information can be edited The user setting information can be read from MH240 or transfer to MH240. The user setting information can be saved in a text file into PC, or the user setting information can be read from a text file into PC. The set up information that becomes an object is as follows. Information edit by the account authority is different. Normal Setting: Incoming Call Setting Normal Setting: Talk Setting Normal Setting: Display Setting Normal Setting: Key Setting Normal Setting: Other Setting Administrator: RTP Setting/Audio Setting 3.9.1. User Setting (Edit data) Step1. Click User Setting in Menu of IP Phone Manager for MH240. Step2. Select tab, and read/is edited data on a set each screen. 71
3.9.1.1. User Setting (Normal Stetting: Incoming Call Setting) Read -------The user Setting data was reading from MH240 is displayed. Transfer ---The user Setting data transfer to MH240. Menu ------It returns to the IP Phone Manager for MH240 menu. 72
3.9.1.2. User Setting (Normal Stetting: Talk Setting) Read -------The user Setting data was reading from MH240 is displayed. Transfer ---The user Setting data transfer to MH240. Menu ------It returns to the IP Phone Manager for MH240 menu. 73
3.9.1.3. User Setting (Normal Stetting: Display Setting) Read -------The user Setting data was reading from MH240 is displayed. Transfer ---The user Setting data transfer to MH240. Menu ------It returns to the IP Phone Manager for MH240 menu. 74
3.9.1.4. User Setting (Normal Stetting: Key Setting) Read -------The user Setting data was reading from MH240 is displayed. Transfer ---The user Setting data transfer to MH240. Menu ------It returns to the IP Phone Manager for MH240 menu. 75
3.9.1.5. User Setting (Normal Stetting: Other Setting) Read -------The user Setting data was reading from MH240 is displayed. Transfer ---The user Setting data transfer to MH240. Menu ------It returns to the IP Phone Manager for MH240 menu. 76
3.9.1.6. User Setting (Administrator Stetting: RTP Setting/Audio Setting) Read -------The user Setting data was reading from MH240 is displayed. Transfer ---The user Setting data transfer to MH240. Menu ------It returns to the IP Phone Manager for MH240 menu. 77
3.9.2. User Setting (Read/Transfer) 3.9.2.1. User Setting (IP Connection: Read) Step1. Click Read on the user setting screen. Step2. Check IP and click Next. 78
Step3. Checking the MH240 to which the file will be uploaded, into the terminal search result, and click Next. One MH240 by checking the list can be selected. Step4. Click Finish in Finish screen. 79
3.9.2.2. User Setting (IP Connection: Transfer) Step1. Click Transfer on the user setting screen. Step2. Check IP and click Next. 80
Step3. Checking the MH240 to which the file will be uploaded, into the terminal search result, and click Next. One MH240 by checking the list can be selected. Step4. After input the password of the target MH240, and click Start. 81
Step5. After seeing the Completion screen and click Finish or Restart. When you restart MH240 to reflect the setting, and click Restart. 82
3.9.2.3. User Setting (USB Connection: Read) Step1. Click Read on the user setting screen. Step2. Check USB and click Next. 83
Step3: After connecting MH240 and USB, click Next. Please refer to 3.1.2. Connected procedure of USB cable. 84
Step4. Click Finish in Finish screen. 85
3.9.2.4. User Setting (USB Connection: Transfer) Step1. Click Transfer on the user setting screen. Step2. Check USB and click Next. 86
Step3: After connecting MH240 and USB, click Next. Please refer to 3.1.2. Connected procedure of USB cable. 87
Step4. After input the password of the target MH240, and click Start. 88
Step5. After seeing the Completion screen and click Finish or Restart. When you restart MH240 to reflect the setting, and click Restart. 89
3.9.3. User Setting (file open/file save) The user setting information can be saved in a text file into PC, or the user setting information can be read from a text file into PC. 3.9.3.1. User Setting (file open) Step1. Select File(F) -> Open(O) on the top menu bar. 3.9.3.2. User Setting (file save) Step1. Select File(F) -> Save(S) on the top menu bar. 90
3.10. Network Setting Read/Edit/Transfer the Network setting information of MH240 It is possible to execute it with IP Connection/USB Connection. The Network Setting information (Connection Target Setting/Wireless Setting/SIP Setting) can be edited. Up to 9 profiles can be set. Moreover, the selection and the priority level of the profile used can be set. The Network setting information can be read from MH240 or transfer to MH240. The Network setting information can be saved in a text file into PC, or the Network setting information can be read from a text file into PC. The Network setting information edit by the account authority is different. 3.10.1. Network Setting (Edit data) Step1. Click Network Setting in Menu of IP Phone Manager for MH240. Step2. Select tab, and read/is edited data on a set each screen. 91