Turn and Tilt Window Hardware 2008
T/T R21 SilverLine Information Turn and Tilt Turn and tilt fittings system for PVC doors and windows, with integrated assembly appliances for the specialised fabricating workshop. A choice of fittings for a wide variety of window types. A wide range of accessories and applications are available. Standard Features: Adjustable brass roller cams. Integrated assembly concept with optimum results Acknowledged quality Wide range to choose from: turn-casements, double casements Central locking mechanisms for bottom hung sashes Lockable balcony doors Sloping windows, arched windows Security versions for single and double casement doors and wondows made from PVC or timber Tilt and turn versions The New Technique The corner pivot and the scissor hinge are flush fitted on to the sash and both have the same drilling pattern. The scissor hinge is fixed according to profile, so that the casement remains in it s set position. All the fittings for the Eurogroove are fitted with snap-in clips to enable automatic screwing. This new concept has reduced the fitting components to the least possible number and so enables the stock and capital tie-up to be kept at absolute minimum. The scissor s ventilation angle is the same on all window sizes. In the range of security fittings, a range which is continually increasing in importance, Schüring has developed the first rolling mushroom headed cam. As the tilt locking device is adjustable there are various possibilities for the setting of tilting angles. The double casement fitting can, from now on, also be automatically screw-fixed. Also note that all other necessary parts such as handles, roller cam striker plates etc. have been firmly integrated, so that a speedier and securer processing is now possible. The Roller Cam A solid coating on the cam minimises friction and corrosion and ensures easier functioning. Each roller cam can, of course, be adjusted with an Allen key, to ensure that the contact pressure of the casement is always evenly distributed. Stepped Cam If it should happen that the window drops, causing the cam to protrude so that it can no longer be adjusted, the protruding cam can be filed down! Rolling is simply better than sliding! The Cam Range Generous travel range with safety margin: the cam travel range of 36 mm allows for a 2-3 mm space allowance between the cam and the striker plate - this means that the position of the strike plate will not have to be altered: Tolerances occurring during measuring of the window are compensated for. Vertical and horizontal adjustments can be carried out on site. The safety of 3 mm ensures that the roller cam, after being correctly adjusted, does not catch on or hit the striker plate. www.hafele.com 1
T/T R21 SilverLine Centred Gear Turn Before Tilt Central Handle Position Concealed Single Handed T/T Fitting With Centred Handle Position, Non-Handed and Variable Use for Windows and Doors 7 11 2 4 3 8 12 or 13 11 tilt 11 turn 14 1 close 11 11 Note: Example above is R/H 9 Technical Features: Application possibilities: 10 Adjustable brass roller cams. Gear travel: 36 mm. Scissor pull-in: 25 mm. Centre fixing. All sash parts can be clamped. Sash rebate width (SRW): 280-1500 mm Sash rebate height (SRH), locking side: 360-2200 mm Sash weight: 100 kg (130 kg available upon request) (Maximum sash width is 1.25 X sash height). For other T/T options please contact your nearest Häfele sales office 6 5 2 www.hafele.com
T/T R21 SilverLine Centred Gear Central Handle Position Schüring T/T - R21 Silverline Standard Turn First UPVC Koemmerling 1. Espagnolette SRH Length mm 200-600 470 970.33.100 600-850 570 970.33.101 700-1000 700 970.25.163 850-1000 710 RC 970.25.164 1000-1340 1040 RC 970.33.102 1300-1600 1300 RC 970.33.103 1600-1900 1600 RC 970.33.104 1900-2200 1900 RC 970.33.105 2. Corner Slider SRW/H 280-1500/360-2200 970.25.044 NB: To achieve 280 mm SRW 970.25.045 3. Centre Lock SRH Size 200 RC 970.25.049 700-1200 400 RC 970.25.050 1200-1500 600 RC 970.25.051 1400-1600 800 RC 970.25.052 4. Scissor Stay, Turn First SRW Size 310-625 475 970.25.171 625-840 690 970.25.172 840-1060 910 970.25.173 1060-1280 1130 970.25.174 1280-1500 1350 970.25.175 5. Corner Pivot, Frame Part 100 kg 970.25.040 Cover Cap White 970.25.042 6. Pivot, Sash Part 100 kg 970.25.041 Cover Cap White 970.25.043 Note: SRH SRW RC Sash rebate height Sash rebate width Roller cam 7. Scissor Arm Cat. No SRW Size 310-645 475 970.25.181 625-840 690 970.25.182 840-1500 1350 970.25.183 8. Scissor Bearing Cat. No Scissor Bearing and Pin 970.25.074 Cover Cap Sash Part White 970.25.075 Cover Cap Frame Part White 970.25.076 9. Corner Slider Cat. No 150 x 150 mm 970.25.046 10. Tilt/Turn Strike Cat. No Left 970.25.082 Right 970.25.083 11. Strike Plate Cat. No Non handed 970.25.190 12. Handle Cat. No Standard, white 970.33.207 13. Handle Cat. No Lockable, white 970.43.207 14. Endlock Cat. No SRH 1600-2200 970.25.191 Screws p Page 13 Glazing blocks p Page 14 www.hafele.com 3
Residential Door Locks RV 100, 1 Piece Version G, Lift-Lever Locking Centre Spindle PVC & Steel Reinforcement Locking Features: Door Lock with 4 additional roller-cam bolts, which help to stabilise the door when in a closed position. Application: This is not a burglar resistant locking device 16 mm 2100 mm Height: U-plate Hole spacing: 92 mm Spindle housing: 8 mm Rear backset: Finish: 18 mm Bichromate 12ym Faceplate: SilverLine Backset mm 26 911.50.772 35 911.50.771 45 911.50.014 55 911.50.015 Note: fixing screws p Page 13 4 www.hafele.com
Residential Door Locks DV 400, 1 Piece Version G, Lift-Lever Features: The Turn-bolt-Technology with rigid bolt which is locked in the final position guarantees high security (this satisfies the requirements of DIN 18103) At the same time the system allows an adjustment of the bolt enclosure into the keeps. 16 mm 2100 mm Height: flatplate Hole spacing: 92 mm Spindle housing: 8 mm Rear backset: Finish: 18 mm Bichromate 12ym Faceplate: SilverLine Backset mm 26 911.50.775 35 911.50.776 Note Order latch strike, deadbolt strikes and keeps separately. Note: fixing screws p Page 13 www.hafele.com 5
Residential Door Locks RV 150, 1 Piece Version P, Wind Up Toothed Rack Locked Centre Spindle PVC & Steel Reinforcement Locked Features: Door Lock with 4 additional synchronised roller-cam bolts, which help to stabilise the door when in a closed position. Application: This is not a burglar resistant locking device 16 mm 2100 mm Height: Flat plate Hole spacing: 92 mm Spindle housing: 8 mm Rear backset: Finish: 18 mm Bichromate 12ym Faceplate: SilverLine Toothed Rack Backset mm 26 911.50.016 30 911.50.017 35 911.50.018 45 911.50.019 55 911.50.020 Note Order latch strike, deadbolt strikes, roller cam and keeps separately. Note: fixing screws p Page 13 6 www.hafele.com
Residential Door Locks DV 450, 1 Piece Version P, Wind Up Features: The counter rotational Turn-bolt-technology with the rigid inflexible bolt which is locked in the final position (this satisfies the requirements of DIN 18103) guarantees high security. At the same time the system allows an adjustment of the bolt enclosure into the keeps. Non-handed 16 mm 2100 mm Height: Flat plate Hole spacing: 92 mm Spindle housing: 8 mm Rear backset: Finish: 18 mm Bichromate 12ym Faceplate: SilverLine Backset mm 30 911.50.021 35 911.50.022 45 911.50.023 55 911.50.024 Note Order latch strike, deadbolt strikes and turnbolt keeps separately. Note: fixing screws p Page 13 www.hafele.com 7
Residential Door Locks Strike Plates DV/SV Latch With Enclosed Deadbolt Housing Features: Depth: Finish: For use with DV/SV Door Locks 27 mm 212.5 mm 18.5 mm Silverline Profile Koemmerling Gold, Left Hand 911.50.025 Koemmerling Gold, Right Hand 911.50.026 Note Order Latch keep separately. Latch Keep 20 mm 85 mm Handing Left Hand 911.39.238 Right Hand 911.39.239 8 www.hafele.com
Residential Door Locks Strike Plates Turn-Bolt Keep Features: Depth: Finish: For use with DV Door Locks 27 mm 135 mm 18.5 mm Silverline Profile Koemmerling Gold, Left Hand 911.50.027 Koemmerling Gold, Right Hand 911.50.028 Roller Cam RZ-Strike 20 mm 85 mm Handing Koemmerling Gold 970.25.081 www.hafele.com 9
Residential Door Locks VHT Bolt VHT Bolt For Double Leaf Doors without Mullion Application: Housing width: Bolt travel: For double leaf doors without mullion Fits into Eurogroove (12 mm) 16 mm 150 mm 12 mm 20 mm Finish Silverline 971.03.002 Strike For VHT Bolt Note Order strike separately. Area of application: For use with VHT Bolt Handing Non-handed 971.03.003 10 www.hafele.com
Schüring Tools Glazing Shovel For aligning glass and installation of dubloc glazing blocks Finish Wood 008.42.020 PVC 008.42.021 Nylon Hammer For work with PVC windows. Has an impact absorbing head 006.00.470 Don Carlos Knife For cleaning weld beads and trimming seals For other T/T options please contact your nearest Häfele sales office 000.33.090 www.hafele.com 11
Handles Handle With integrated lock Finish MTG handle silver 90 deg. lockable 974.40.511 Handle Non-locking Finish MTG handle alu 90 deg. locking 974.30.511 Handle With integrated lock Finish MTR handle white 45 deg. 974.40.527 Handle Non-locking For other handle options available upon request Finish MTR-M handle white pin 38 mm 974.30.547 12 www.hafele.com
Description 4.3 x 25 mm PS-screw 029.00.505 4.3 x 38 mm PS-screw 029.00.507 3.9 x 19 mm SF screw 029.01.503 3.9 x 25 mm SF screw 029.01.504 3.9 x 32 mm SF-screw 029.01.505 www.hafele.com 13
Description 2 mm glazing block, red 970.25.202 3 mm glazing block, green 970.25.203 4 mm glazing block, yellow 970.25.204 5 mm glazing block, blue 970.25.205 14 www.hafele.com