Mortice Lock D450 SERIES... 46 D455 / D45... 4 D454 / D452... 49 D45 / D456 / D457... 52 D45 / D459... 5 LOKS FOR LUMINIUM... 56 4 / 60 / 2760... 5 2560 / 2460 / 260... 59 264 / 262... 60 262 / 2562... 6 45
D450 SERIES range of security locks fully certified to all major European standards D450 Project Lock Series offers a full range of functions. These locks will find their place in commercial as well as in residential buildings where high durability is required. The D450 range features a variety of functions suitable for all types of interior doors and outside doors, including escape functions. DVIE Recommendations Do not paint over the front plate of the lock. lean the mortice carefully prior to fitting the lock to the door. fter fitting: Test the lock function with the door open. To ensure warranty, do not alter the product s characteristics. Warranty years 0 years mechanical warranty 46
pplications High frequency of use by people with little incentive to care: Grade - ategory of use - EN 209-200 Residential & ommercial buildings -Public Doors Suitable for timber and metal doors. Technical datas Slim lock body, 5 mm thick, for minimum mortice clearance Galvanized steel lock body for superior corrosion resistance Sealed lock body for minimized dust penetration Oval shape deadbolt, 20 mm projection, double throw. Side load resistance >,0 dan. Reversible latch bolt, curved shape «easy latch» Key to latch Heavy duty follower sprung suitable for non spring loaded lever furniture. Passage holes for bolt-through fixing lever furniture. Supplied with striker plates in compliance with EN 209-200. D450 Series complies in full with the highest requirements of NF EN 209-200. Emergency functions comply with EN 79-200* Suitable for use on fire/smoke doors assemblies (except otherwise stated) ackset: Finish: Front plates: 60 mm rushed Stainless Stee l (X) Rounded ends in 20 mm Square ends in 24 mm Special features urved latch bolt for easier latching Edge-cut latch bolt for smoother opening Profiled deadbolt for extra side load resistance Reversibility possible without dismantling the lock out of the door Heavy duty follower spring suitable for nonsprung lever furniture D 450 Series is manufactured by Vachette Vachette is an ISO 900 certified factory company Ten years mechanical warranty *In order to keep t he EN 79 certification, emergency locks MUST be equipped with their respective striker plates and with the certified handles that have been tested with the lock: (See certified products in the Vachette Lever handles catalogue) Standards and compliance 47
D450 SERIES D455 Entrance sash lock European E standards with mm follower () and center to center 72 mm, front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by 2 with striker plates. Finish rushed Stainless Steel Reference D455 XK 24 60/72/ FPF D455 XR 20 60/72/ FPF D455 XK 20 60/72/ FPF 0 Intended use : ompartmentalization Doors fire / smoke Q niveau 2 X 0 G H 2 0 NF EN 209 : 2004 D45 Privacy lock European E standards with mm follower () and center to center 72 mm, front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by 2 with striker plates. Finish rushed Stainless Steel Reference D45 XK 24 60/72/ FPF D45 XR 20 60/72/ FPF 0 Intended use : ompartmentalization Doors fire / smoke Q X 0 G H 0 2 0 NF EN 209 : 2004 Pricavy follower mm 4
MORTIE LOK D450 SERIES D454 Dead lock Front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Locks packed by 2 with striker plates. Finish rushed Stainless Steel Reference D454 XK 24 60/72/ D454 XR 20 60/72/ - - 0 0 G H 2 0 NF EN 209 : 2004 D452 Latch lock European E standards with mm follower (), front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by 2 with striker plates. Finish rushed Stainless Steel Reference D452 XK 24 60 / FPF D452 XR 20 60 / FPF 0 Intended use : ompartmentalization Doors fire / smoke Q X 0 G H 0 2 0 NF EN 209 : 2004 49
D450 SERIES Technical drawings 20 ROUND 24 SQURE 7 THIKNESS 5 72 THIKNESS 9 Ref. D455 FPF 60 7 THIKNESS 5 20 ROUND 24 SQURE THIKNESS 9 72 Ref. D45 FPF 60 50
MORTIE LOK D450 SERIES Technical drawings 20 ROUND 24 SQURE THIKNESS 5 THIKNESS 9 Ref. D454 60 20 ROUND 24 SQURE 7 THIKNESS 5 60 Ref. D452 FPF 5
D450 - ESPE-FUNTIONS D45 Night Latch European E standards with mm follower (), center to center 72 mm, front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by 2 with striker plates. Finish rushed Stainless Steel Reference D45 XK 24 60/72/ FPF D45 XR 20 60/72/ FPF X 0 G - H 0 2 0 NF EN 79 : 200 Outside handle to be fixed D456 Storeroom lock nti-thrust bolt - Night Latch European E standards with mm follower (), center to center 72 mm, front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by with striker plates. Finish rushed Stainless Steel Reference D456 XK 24 60/72/ FPF D456 XR 20 60/72/ FPF X 0 G - H 0 2 0 NF EN 79 : 200 Outside handle to be fixed 52
MORTIE LOK D450 - ESPE-FUNTIONS D457 lassroom lock nti-thrust bolt European E standards with mm follower (), center to center 72 mm, front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by with striker plates. Finish rushed Stainless Steel Reference D457 XK24 60/72/ FPF D457 XR20 60/72/ FPF X 0 G - H 2 0 NF EN 79 : 200 Split spindle REF demi D45URG to be ordered separatly. Split follower. Outside handle made rigid when locked. D45 Emergency Sash lock European E standards with mm follower (), center to center 72 mm, front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by with striker plates. Finish rushed Stainless Steel Reference D45 XK24 60/72/ FPF D45 XR20 60/72/ FPF X 0 G H 2 0 NF EN 79 : 200 Split spindle REF demi D45URG to be ordered separatly. Split follower. Single ction Escape. 5
D450 - ESPE-FUNTIONS D459 Emergency Sash lock SF European E EN79 standards with mm follower (), center to center 72 mm, front plate 20 mm rounded ends (R20) or 24 mm square ends (K24). ackset: 60 mm. Fire rated as standard. Locks packed by with striker plates. Finish rushed Stainless Steel Reference D459 XK 24 60/72 FPF D459 XR 20 60/72 FPF X 0 G H 2 0 NF EN 79 : 200 Split spindle REF demi D45URG to be ordered separatly. Split follower. Single ction Escape. Deadbolt can only be activated when door. Is in closed position: this prevents the fire door to be blocked open by mis-use of deadbolt. N: In order to keep the EN 79 certification, escape locks MUST be equiped with their respective striker plates and with the certified handles tested with the lock. Please check available models on the certificate -avaialble upon request- 54
MORTIE LOK D450 - ESPE-FUNTIONS Technical drawings 24 SQURE 20 ROUND 7 72 60 Ref. D45 / D456 / D457 FPF 24 SQURE 20 ROUND 7 72 60 Ref. D45 / D459 FPF 55
LOKS FOR LUMINIUM POINT LOKS range for metal doors The Stremler range of single point locks has been specially developed for metal doors, permanently striving for quality and innovation. These locks are comprised of many systems patented by Stremler over the last 20 years. French market leader for aluminium framed door and window locks, the Stremler range meets the most stringent standards in terms of security and quality and offers a wide range in order to respond to the variety of use in the market (case thicknesses 6, 7, 9, 4, 42, 45, 47, 52, 57). 56
pplications Interior or exterior aluminium or steel doors. Technical datas Locks 92 mm between axes, follower mm. European cylinder DIN bit (standard DIN 254). Meets French Standard NF: EN 209 et EN 670. nti-corrosion protection on body and mechanism. Special features The LPS system On closing the door, traditional latches are noisy when coming into contact with the frame. With the LPS sliding skid, the door is closed with a minimum of effort and in silence. You prevent scratching the frame. Reversibility There is nothing easier than turning round the latch. Without any tool and in a blink the direction of opening of lock can be change thus making stock management easier. Smoothness The use of gears eliminates friction and renders the mechanism easier to operate, even when the door encounters the frame. 57
LOKS FOR LUMINIUM POINT LOKS 4 Latch lock Reinforced latch spring Without cylinder: inside communicating door With cylinder: for adapting to electric strike x 2,5 2 6-4.6.0 24 9-4.9.0 26 4-4.4.0 0 45-4.45.0 Templates for duplication : ref. 26.0.0 60 Single point lock Faceplate x 2.5 x 244 mm / 24 x 2,5 x 00 mm x 2,5 24 x 2,5 2 6 5 60.6.0 60.6.0 TP24 24 9 5 60.9.0 60.9.0 TP24 26 4 5 60.4.0 60.4.0 TP24 0 45 5 60.45.0 60.45.0 TP24 Templates for duplication : ref. 26.0.0 2760 Single point lock Throw of deadbolt: 25 mm 24 x 2,5 27 42 25 2760.42.0TP24 2 47 25 2760.47.0TP24 7 52 25 2760.52.0TP24 42 57 25 2760.57.0TP24 Templates for duplication : ref. 26.0.0 5
MORTIE LOK LOKS FOR LUMINIUM POINT LOKS 2560 Single point lock Stainless steel lock. For gate and gates. Salin mist resistance: 200 hours. Throw of the latch adjustable from to 20 mm. x 2,5 2 47 20 2560.47.0 7 52 20 2560.52.0 42 57 20 2560.57.0 Templates for duplication : ref. 26.0.0 2460 Single point lock Specially designed for thin steel profiles. Flat face plate x 2,5 x 244 mm. x 2,5 0,5 2 2460.2.0 6,5 2 2460.2.0 2 6 5 2460.6.0 24 9 5 2460.9.0 0 45 5 2460.45.0 Templates for duplication : ref. 26.0.0 260 Single point lock Flat face plate x 2.5 x 244 mm. U face plate 24 x 6 x 244 mm. Throw of pivoting deadbolt 25 mm. x 2,5 24 x 6 2 6 25 260.6.0-7 25-260.7.0U6 24 9 25 260.9.0-26 4 25 260.4.0 260.4.0U6 0 45 25 260.45.0 - Templates for duplication : ref. 26.0.0 59
LOKS FOR LUMINIUM POINT LOKS 264 Single point lock Interior door with lockless blockage. djustable nylon roller (7 to 9 mm). x 2,5-6 - 264.6.0 Templates for duplication : ref. 26.0.0 262 Single point lock olt for additional locking of a door. Is installed in addition to a standard lock. x 2,5 24 9 5 262.9.0 Templates for duplication : ref. 26.0.0 262 Single point lock Pivoting bolt for swing door. Throw of pivoting deadbolt 25 mm and key turn. x 2,5 2 6 25 262.6.0 24 9 25 262.9.0 26 4 25 262.4.0 0 45 25 262.45.0 Templates for duplication : ref. 26.0.0 2562 Single point lock Hookbolt for sliding door. Guide and anti-warping stud. Supplied with flat strike. x 2,5 2 6 25 2562.6.0 24 9 25 2562.9.0 26 4 25 2562.4.0 0 45 25 2562.45.0 Templates for duplication : ref. 26.0.0 60
6 MORTIE LOK LOKS FOR LUMINIUM POINT LOKS,5 20 4 25 24 4 0 244 5,5 65 94 92 55 0 0 0 49 20 4,5 65 55 5,5 4 0 25 244 94 92 0 0 0 49 2 2 Ref. 260 Ref. 2460 0 64 42 2 5 76 70 4 7 2,5 244 4 Ø 5,5 6,5 6,5 0,5 Ref. 2560 4 92 94 69 244 9 6,5 2 46 9 49 0 6 4 Ø 5,5 2 SORTIE MINI SORTIE MXI 20 20 2,5 Technical drawings 6,5 20 4 5,5 4 244 94 92 49 0 2 Ref. 4 0 49 6 5 69 92 94 4 6,5 2,5 20 2 4 244 Ø 5,5 Ref. 60 2 5,5 24 244 4 25 69 6 2 0 49 9 46 94 92 4 6,5 9 Ref. 2760
LOKS FOR LUMINIUM POINT LOKS Technical drawings R 6 0 57 6 66 50 6 95 5 Ø 69 0 Ø 5,5 2,5 24 9 Ø 5,5 6,5 6,5 Ref. 264 Ref. 262 Ø 5,5 Ø 4 2 55 Ø 6 94 244 56 5 9 75 5 Sauf 6/9 6 72 0 0 25 72 2 0 Gâche inox ép. : 2,5 0 0 0,5 25 2 244 0 5,5 2,5 Ø 5,5,5,5 Ref. 262 Ref. 2562 62
SS LOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience SS LOY Services administratifs Parc d entreprises du Grand Troyes Quartier Europe entrale 0, avenue de l Europe 0 00 Sainte-Savine - France 552 052 672 RS TROYES - Non contractual document. Vachette reserves the right to alter its products without notice. opyrights : Sébastien oulard - Fotolia - Philippe Masson - reated by : Image et Texte - June 205. 62 www.assaabloy.com