BARRETT. Tubes Division PRODUCT MANUAL CREATIVITY. INNOVATION. TECHNICAL MASTERY.

BARRETT Tubes Division PRODUCT MANUAL CREATIVITY. INNOVATION. TECHNICAL MASTERY.

OVER 60,000 TONNES STEEL STOCK OF AVAILABLE THROUGH OUR NATIONWIDE STOCKHOLDER NETWORK

ABOUT US BARRETT Tubes Division BARRETT TUBES DIVISION IS WELL-ESTABLISHED AND HAS GROWN CONSIDERABLY SINCE ITS INCEPTION IN 1992. WE SPECIALISE IN SUPPLYING WELDED STRUCTURAL HOLLOW SECTIONS TO BS EN 10219 & BS EN 10210, IN GRADES S235, S275 & S355. Complementing this comprehensive product range is our impressive processing capability. Our leadingedge facilities and equipment enable us to provide value-added services such as sawing, ring rolling, tube bending, fast tapping, countersinking, shot blasting and priming. The power and technological capability of our laser cutting equipment are unrivalled. Our multi-million pound Jumbo laser cutting machine is the largest in the country and is far superior to traditional cutting methods in terms of speed, consistency, precision and cost-effectiveness. In addition, you can rely on our in-house transport fleet for efficient and timely delivery to your site. 03

CUSTOMER SERVICE THE LEVEL OF CUSTOMER SERVICE WE PROVIDE SETS US APART FROM THE COMPETITION. We constantly monitor our customer service performance in terms of: PRODUCT QUALITY SPECIFICATION PROCESSING PACKAGING DELIVERY In addition, we strive to work in partnership with our customers, sharing our judgement, expertise and outstanding problem-solving capabilities to ensure the success of your project. Our comprehensive Quality Management System is overseen by our Group Managing Director and regularly reviewed both internally and by independent assessors. We also monitor and respond positively to customer feedback on an ongoing basis. These activities help us ensure that we are continually improving our business performance and the service we provide to our customers. 04

DELIVERY WE PROVIDE A PROMPT AND RELIABLE DELIVERY SERVICE ACROSS THE UK USING OUR OWN TRANSPORT FLEET. WE ALSO SUPPLY AND DELIVER OVERSEAS TO THE MIDDLE EAST, AMERICA AND EUROPE USING OUR TRUSTED LOGISTICS PARTNERS. YOU CAN ORDER ONLINE 24 HOURS A DAY, SEVEN DAYS A WEEK, OR GIVE US A CALL AND WE LL ARRANGE DELIVERY TO SUIT YOU. All our dedicated staff wherever they are based across the UK will act as your one point of contact, whatever product or service you require. 05

CONTENTS ABOUT US 3 CUSTOMER SERVICE 4 DELIVERY 5 CONTENTS 6 CIRCULAR HOLLOW SECTIONS COLD 7 LASERTUBE CUTTING 8 SQUARE HOLLOW SECTIONS COLD 9 LT20 10 RECTANGULAR HOLLOW SECTIONS COLD 11 LT14 12 RENEWABLES/OFFSHORE 13 OFFSHORE SEAMLESS TUBES 14 OFFSHORE WELDED TUBES 14 CIRCULAR HOLLOW SECTIONS HOT 15 SQUARE HOLLOW SECTIONS HOT 16 OVAL HOT 17 SAW CUTTING 18 RECTANGULAR HOLLOW SECTIONS HOT 19 SHOT BLASTING & PRIMING 20 CIRCULAR ERW 21 TUBE MANIPULATION 23 SQUARE ERW 24 LT8 25 RECTANGULAR ERW 26 FLAT OVAL ERW 28 ELLIPTICAL ERW 28 HANDRAILS & WALKWAYS 29 NOMINAL BORE 30 LT FIBER 31 BARRETT STAINLESS 32 BSF 1.4003 STAINLESS 33 BSF 441 STAINLESS 36 FASTEC 39 06

CHS COLD FORMED BS EN 10219-1 : 2006 S235 / S355J2H S420MH Size (mm) Kg/m 21.3 x 3.0 1.35 26.9 x 2.0 1.23 26.9 x 2.5 1.50 26.9 x 3.0 1.77 33.7 x 2.0 1.56 33.7 x 2.5 1.92 33.7 x 3.0 2.27 33.7 x 4.0 2.93 42.4 x 2.0 1.99 42.4 x 2.5 2.46 42.4 x 3.0 2.91 42.4 x 3.2 3.09 42.4 x 4.0 3.79 48.3 x 2.5 2.82 48.3 x 3.0 3.35 48.3 x 3.2 3.59 48.3 x 4.0 4.37 48.3 x 5.0 5.34 60.3 x 3.0 4.24 60.3 x 3.5 4.90 60.3 x 4.0 5.55 60.3 x 5.0 6.82 76.1 x 3.0 5.41 76.1 x 4.0 7.11 76.1 x 5.0 8.77 Size (mm) Kg/m 88.9 x 3.0 6.36 88.9 x 4.0 8.38 88.9 x 5.0 10.30 114.3 x 3.0 8.23 114.3 x 3.5 9.56 114.3 x 4.0 10.90 114.3 x 5.0 13.50 114.3 x 6.0 16.00 139.7 x 4.0 13.40 139.7 x 5.0 16.60 139.7 x 6.0 19.80 139.7 x 8.0 26.00 139.7 x 10.0 32.00 168.3 x 4.0 16.20 168.3 x 5.0 20.10 168.3 x 6.0 24.00 168.3 x 8.0 31.60 168.3 x 10.0 39.00 168.3 x 12.5 48.00 193.7 x 4.0 18.70 193.7 x 5.0 23.30 193.7 x 6.0 27.80 193.7 x 8.0 36.60 193.7 x 10.0 45.30 193.7 x 12.5 55.90 Size (mm) Kg/m 219.1 x 5.0 26.40 219.1 x 6.0 31.50 219.1 x 8.0 41.60 219.1 x 10.0 51.60 219.1 x 12.5 63.70 219.1 x 16.0 80.10 244.5 x 6.0 35.30 244.5 x 8.0 46.70 244.5 x 10.0 57.80 244.5 x 12.5 71.50 244.5 x 16.0 90.20 273.0 x 6.0 39.50 273.0 x 8.0 52.30 273.0 x 10.0 64.90 273.0 x 12.5 80.30 273.0 x 16.0 101.00 323.9 x 6.0 47.00 323.9 x 8.0 62.30 323.9 x 10.0 77.40 323.9 x 12.5 96.00 323.9 x 16.0 121.00 07

LASERTUBE CUTTING TUBE LASERS CAN SAVE UP TO 70% IN TIME COMPARED TO TRADITIONAL MANUFACTURING PROCESSES. ELIMINATE EXTRA WORK BY HAVING THE WELD PREPS DONE ON THE LASER. By utilising the 3D head these labour intensive processes can be done in one pass. Accuracy, first time fit, reduction in welding times and inspection times are just some of the areas which can benefit from lasertube cutting. Free up your mind to innovate and stay ahead of your competition! 08

SHS COLD FORMED BS EN 10219-1 : 2006 S235 / S355J2H / S420MH Size (mm) Kg/m 25 x 25 x 2.0 1.36 25 x 25 x 2.5 1.64 25 x 25 x 3.0 1.89 30 x 30 x 2.0 1.68 30 x 30 x 2.5 2.03 30 x 30 x 3.0 2.36 40 x 40 x 2.0 2.31 40 x 40 x 2.5 2.82 40 x 40 x 3.0 3.30 40 x 40 x 4.0 4.20 50 x 50 x 2.0 2.93 50 x 50 x 2.5 3.60 50 x 50 x 3.0 4.25 50 x 50 x 4.0 5.45 50 x 50 x 5.0 6.56 50 x 50 x 6.0 7.87 60 x 60 x 3.0 5.19 60 x 60 x 4.0 6.71 60 x 60 x 5.0 8.13 70 x 70 x 3.0 6.13 70 x 70 x 3.5 7.06 70 x 70 x 4.0 7.97 70 x 70 x 5.0 9.70 80 x 80 x 3.0 7.07 80 x 80 x 3.5 8.16 80 x 80 x 4.0 9.22 Size (mm) Kg/m 80 x 80 x 5.0 11.30 80 x 80 x 6.0 13.20 80 x 80 x 8.0 16.40 90 x 90 x 3.0 8.01 90 x 90 x 3.5 9.26 90 x 90 x 4.0 10.50 90 x 90 x 5.0 12.80 90 x 90 x 6.0 15.10 90 x 90 x 8.0 18.90 100 x 100 x 3.0 8.96 100 x 100 x 4.0 11.70 100 x 100 x 5.0 14.40 100 x 100 x 6.0 17.00 100 x 100 x 8.0 21.40 100 x 100 x 10.0 27.40 120 x 120 x 4.0 14.20 120 x 120 x 5.0 17.50 120 x 120 x 6.0 20.70 120 x 120 x 8.0 26.40 120 x 120 x 10.0 31.80 140 x 140 x 4.0 16.80 140 x 140 x 5.0 20.70 140 x 140 x 6.0 24.50 140 x 140 x 8.0 31.40 140 x 140 x 10.0 38.10 150 x 150 x 5.0 22.30 Size (mm) Kg/m 150 x 150 x 6.0 26.40 150 x 150 x 8.0 33.90 150 x 150 x 10.0 41.30 160 x 160 x 5.0 23.80 160 x 160 x 6.0 28.30 160 x 160 x 8.0 36.50 160 x 160 x 10.0 44.40 180 x 180 x 5.0 27.00 180 x 180 x 6.0 32.10 180 x 180 x 8.0 41.50 180 x 180 x 10.0 50.70 180 x 180 x 12.5 60.50 200 x 200 x 5.0 30.10 200 x 200 x 6.0 35.80 200 x 200 x 8.0 46.50 200 x 200 x 10.0 57.00 200 x 200 x 12.5 68.30 250 x 250 x 6.0 45.20 250 x 250 x 8.0 59.10 250 x 250 x 10.0 72.70 250 x 250 x 12.5 88.00 300 x 300 x 6.0 54.70 300 x 300 x 8.0 71.60 300 x 300 x 10.0 88.40 300 x 300 x 12.5 108.00 09

LT20 JUMBO A TRUE MAMMOTH OF A MACHINE AFFECTIONATELY CALLED JUMBO BY IT S MAKERS DUE TO THE SHEER SCALE OF THE MACHINE AND THE SIZES OF SECTIONS IT CAN PROCESS. For five years the JUMBO a Fully CNC Controlled Five Axis Laser has enabled LaserTUBE Cutting to offer unrivalled processing on Tubes up to 508x16 - Box Sections up to 500x300x16 400x400x16 and certain Open Sections in finished lengths up to 15 metres long complete with time saving weld preps! Materials processed include Mild & Stainless Steel. Accuracy has been improved with the addition of a Renishaw Probe System. 10

RHS COLD FORMED BS EN 10219-1 : 2006 S235 / S355J2H / S420MH Size (mm) Kg/m 50 x 25 x 2 2.15 50 x 25 x 2.5 2.62 50 x 25 x 3 3.07 50 x 30 x 2 2.31 50 x 30 x 2.5 2.82 50 x 30 x 3 3.30 50 x 30 x 4 4.20 60 x 30 x 3 3.88 60 x 40 x 2.5 3.60 60 x 40 x 3 4.25 60 x 40 x 4 5.45 60 x 40 x 5 6.56 70 x 40 x 3 4.72 70 x 40 x 4 6.08 70 x 50 x 3 5.19 70 x 50 x 4 6.71 75 x 50 x 3 5.42 80 x 40 x 3 5.19 80 x 40 x 4 6.71 80 x 40 x 5 8.13 80 x 50 x 3 5.66 80 x 50 x 4 7.34 80 x 50 x 5 8.91 90 x 50 x 3 6.13 90 x 50 x 3.5 7.06 90 x 50 x 4 7.97 90 x 50 x 5 9.70 Size (mm) Kg/m 100 x 50 x 2.5 5.56 100 x 50 x 3 6.60 100 x 50 x 4 8.59 100 x 50 x 5 10.50 100 x 50 x 6 12.30 100 x 60 x 3 7.07 100 x 60 x 3.5 8.16 100 x 60 x 5 11.30 100 x 60 x 6 13.20 100 x 60 x 8 17.50 120 x 60 x 3 8.01 120 x 60 x 3.5 9.26 120 x 60 x 5 12.80 120 x 60 x 6 15.10 120 x 80 x 3 8.96 120 x 80 x 4 11.70 120 x 80 x 5 14.40 120 x 80 x 6 17.00 120 x 80 x 8 21.40 120 x 80 x 10 27.40 150 x 100 x 4 14.90 150 x 100 x 5 18.30 150 x 100 x 6 21.70 150 x 100 x 8 27.70 150 x 100 x 10 33.40 160 x 80 x 4 14.20 160 x 80 x 5 17.50 160 x 80 x 6 20.70 160 x 80 x 8 26.40 160 x 80 x 10 31.80 Size (mm) Kg/m 200 x 100 x 4 18.00 200 x 100 x 5 22.30 200 x 100 x 6 26.40 200 x 100 x 8 33.90 200 x 100 x 10 41.30 200 x 100 x 12.5 48.70 200 x 120 x 5 23.80 200 x 120 x 6 28.30 200 x 150 x 6 31.10 200 x 150 x 8 40.20 200 x 150 x 10 49.10 250 x 150 x 5 30.10 250 x 150 x 6 35.80 250 x 150 x 8 46.50 250 x 150 x 10 57.00 250 x 150 x 12.5 68.30 300 x 100 x 6 35.80 300 x 100 x 8 46.50 300 x 100 x 10 57.00 300 x 100 x 12.5 68.40 300 x 200 x 6 45.20 300 x 200 x 8 59.10 300 x 200 x 10 72.70 300 x 200 x 12.5 88.00 400 x 200 x 8 71.60 400 x 200 x 10 88.40 400 x 200 x 12.5 108.00 11

LT14 ANOTHER UK FIRST RECENTLY COMMISSIONED IN LATE 2012 OFFERS PROCESSING CAPABILITIES SIMILAR TO ITS BIGGER BROTHER THE JUMBO. Sections that can be processed include Tubes up to 14 (355.6mm o/d), hence the name, Box Sections up to 260x260 and 300x200. Equivalent Open Sections can all be processed in lengths up to 12 metres finished complete with time saving weld preps! Materials processed include Mild & Stainless Steel. 12

OFFSHORE AND RENEWABLES WE PROVIDE A DEDICATED AND FOCUSED SERVICE TO THE OFFSHORE MARKET FOR THE OIL, GAS AND RENEWABLE ENERGY SECTORS. Our primary function is as a stockholder of hot & cold formed circular, square and rectangular sections and seamless tubes. Stocked grades include G13+N, G15+N and API X52 in addition to S355J2H to cater for the needs of offshore fabricators. Grades are supplied in the normalised condition which reduces HAZ problems in the post weld condition. Other grades, such as A333 Grade 6, are available through our supply network. All stocked material is sourced from European mills/suppliers and is supplied with 3.1 certification in accordance with EN10204. Through the Barrett Steel Group we also supply angles, beams, columns and plate in grades including J2, G8 and G10. 13

OFFSHORE SEAMLESS TUBES EN10225 G15+N/API 5L X52/EN10210 S355 J2H Size (mm) 177.8 x 16 63.84 177.8 x 20 77.83 177.8 x 30 109.34 193.7 x 16 70.11 193.7 x 20 85.67 219.1 x 12.5 63.69 219.1 x 20 98.20 219.1 x 25 119.66 273.1 x 12.5 80.33 273.1 x 20 124.83 Kg/m Size (mm) Kg/m Size (mm) Kg/m 273.1 x 25 152.95 273.1 x 30 179.85 323.9 x 20 149.88 323.9 x 25 184.27 323.9 x 30 217.43 355.6 x 20 165.52 355.6 x 25 203.81 355.6 x 30 240.88 406.4 x 20 190.57 406.4 x 25 235.13 406.4 x 30 278.46 457 x 20 215.52 457 x 25 266.33 457 x 30 315.89 508 x 20 240.68 508 x 25 297.79 508 x 30 353.62 610 x 20 290.99 610 x 25 360.65 610 x 30 429.08 OFFSHORE WELDED TUBES EN10225 G13+N Size (mm) 48.3 x 4 4.37 48.3 x 5 5.39 60.3 x 4 5.55 60.3 x 5 6.82 168.3 x 10 39.04 168.3 x 12.5 48.03 193.7 x 10 45.30 193.7 x 12.5 55.85 219.1 x 10 51.56 Kg/m Size (mm) Kg/m Size (mm) Kg/m 219.1 x 12.5 63.68 219.1 x 16 80.14 273 x 10 64.86 273 x 12.5 80.30 273 x 16 101.40 323.9 x 10 77.41 323.9 x 12.5 95.99 323.9 x 16 121.49 355.6 x 10 85.22 355.6 x 12.5 105.76 355.6 x 16 133.99 406.4 x 10 97.75 406.4 x 12.5 121.42 406.4 x 16 154.03 508 x 10 122.81 508 x 12.5 152.74 508 x 16 194.12 14

CHS HOT FORMED BS EN 10210-1 : 1994 S355J2H Size (mm) Kg/m 21.3 x 3.2 1.43 26.9 x 3.2 1.87 33.7 x 2.6 1.99 33.7 x 3.2 2.41 33.7 x 4.0 2.93 42.4 x 2.6 2.55 42.4 x 3.2 3.09 42.4 x 4.0 3.79 48.3 x 3.2 3.56 48.3 x 4.0 4.37 48.3 x 5.0 5.34 60.3 x 3.2 4.51 60.3 x 4.0 5.55 60.3 x 5.0 6.82 76.1 x 3.2 5.75 76.1 x 4.0 7.11 76.1 x 5.0 8.77 88.9 x 3.2 6.76 88.9 x 4.0 8.38 88.9 x 5.0 10.30 88.9 x 6.3 12.80 114.3 x 3.6 9.83 114.3 x 5.0 13.50 114.3 x 6.3 16.80 139.7 x 5.0 16.60 Size (mm) Kg/m 139.7 x 6.3 20.70 139.7 x 8.0 26.00 139.7 x 10.0 32.00 168.3 x 5.0 20.10 168.3 x 6.3 25.20 168.3 x 8.0 31.60 168.3 x 10.0 39.00 168.3 x 12.5 48.00 193.7 x 5.0 23.30 193.7 x 6.3 29.10 193.7 x 8.0 36.60 193.7 x 10.0 45.30 193.7 x 12.5 55.90 219.1 x 5.0 26.40 219.1 x 6.3 33.10 219.1 x 8.0 41.60 219.1 x 10.0 51.60 219.1 x 12.5 63.70 219.1 x 16.0 80.10 244.5 x 6.3 37.00 244.5 x 8.0 46.70 244.5 x 10.0 57.80 244.5 x 12.5 71.50 244.5 x 16 90.20 273.0 x 6.3 41.40 273.0 x 8.0 52.30 Size (mm) Kg/m 273.0 x 10.0 64.90 273.0 x 12.5 80.30 273.0 x 16 101.00 323.9 x 6.3 49.30 323.9 x 8.0 62.30 323.9 x 10.0 77.40 323.9 x 12.5 96.00 323.9 x 16.0 121.00 355.6 x 8.0 68.60 355.6 x 10.0 85.20 355.6 x 12.5 106.00 355.6 x 16.0 134.00 406.4 x 8.0 78.60 406.4 x 10.0 97.80 406.4 x 12.5 121.00 406.4 x 16.0 154.00 457.0 x 8.0 88.60 457.0 x 10.0 110.00 457.0 x 12.5 137.00 457.0 x 16.0 174.00 508.0 x 10.0 123.00 508.0 x 12.5 153.00 508.0 x 16.0 194.00 15

SHS HOT FORMED BS EN 10210-1 : 1994 S355J2H Size (mm) Kg/m 40 x 40 x 3.0 3.41 40 x 40 x 3.2 3.61 40 x 40 x 4.0 4.39 40 x 40 x 5.0 5.28 50 x 50 x 3.0 4.35 50 x 50 x 3.2 4.62 50 x 50 x 4.0 5.64 50 x 50 x 5.0 6.85 50 x 50 x 6.3 8.31 60 x 60 x 3.0 5.29 60 x 60 x 3.2 5.62 60 x 60 x 4.0 6.90 60 x 60 x 5.0 8.42 60 x 60 x 6.3 10.30 60 x 60 x 8.0 12.50 70 x 70 x 3.0 6.24 70 x 70 x 3.6 7.40 70 x 70 x 5.0 9.99 70 x 70 x 6.3 12.30 70 x 70 x 8.0 15.00 80 x 80 x 3.0 7.18 80 x 80 x 3.6 8.53 80 x 80 x 5.0 11.60 80 x 80 x 6.3 14.20 80 x 80 x 8.0 17.50 90 x 90 x 3.6 9.66 90 x 90 x 5.0 13.10 90 x 90 x 6.3 16.20 90 x 90 x 8.0 20.10 Size (mm) Kg/m 100 x 100 x 4.0 11.90 100 x 100 x 5.0 14.70 100 x 100 x 6.3 18.20 100 x 100 x 8.0 22.60 100 x 100 x 10.0 27.40 120 x 120 x 5.0 17.80 120 x 120 x 6.3 22.20 120 x 120 x 8.0 27.60 120 x 120 x 10.0 33.70 120 x 120 x 12.5 40.90 140 x 140 x 5.0 21.00 140 x 140 x 6.3 26.10 140 x 140 x 8.0 32.60 140 x 140 x 10.0 40.00 140 x 140 x 12.5 48.70 150 x 150 x 5.0 22.60 150 x 150 x 6.3 28.10 150 x 150 x 8.0 35.10 150 x 150 x 10.0 43.10 150 x 150 x 12.5 52.70 150 x 150 x 16.0 65.20 160 x 160 x 5.0 24.10 160 x 160 x 6.3 30.10 160 x 160 x 8.0 37.60 160 x 160 x 10.0 46.30 160 x 160 x 12.5 56.60 160 x 160 x 16.0 70.20 Size (mm) Kg/m 180 x 180 x 5.0 27.30 180 x 180 x 6.3 34.00 180 x 180 x 8.0 42.70 180 x 180 x 10.0 52.50 180 x 180 x 12.5 64.40 180 x 180 x 16.0 80.20 200 x 200 x 5.0 30.40 200 x 200 x 6.3 38.00 200 x 200 x 8.0 47.70 200 x 200 x 10.0 58.80 200 x 200 x 12.5 72.30 200 x 200 x 16.0 90.30 250 x 250 x 6.3 47.90 250 x 250 x 8.0 60.30 250 x 250 x 10.0 74.50 250 x 250 x 12.5 91.90 250 x 250 x 16.0 115.00 300 x 300 x 6.3 57.80 300 x 300 x 8.0 72.80 300 x 300 x 10.0 90.20 300 x 300 x 12.5 112.00 300 x 300 x 16.0 141.00 350 x 350 x 8.0 85.40 350 x 350 x 10.0 106.00 350 x 350 x 12.5 131.00 350 x 350 x 16.0 166.00 400 x 400 x 10.0 122.00 400 x 400 x 12.5 151.00 400 x 400 x 16.0 191.00 16

OVAL HOT FORMED BS EN 10210-1 : 1994 S355J2H Size (mm) 150 x 75 x 4.0 10.70 150 x 75 x 5.0 13.30 150 x 75 x 6.0 16.50 200 x 100 x 5.0 17.90 200 x 100 x 6.0 22.30 200 x 100 x 8.0 28.50 200 x 100 x 10.0 34.50 200 x 100 x 12.5 42.40 Kg/m Size (mm) Kg/m Size (mm) Kg/m 250 x 125 x 6.3 28.20 250 x 125 x 8.0 34.40 250 x 125 x 10.0 43.80 250 x 125 x 12.5 53.90 300 x 150 x 8.0 42.80 300 x 150 x 10.0 53.00 300 x 150 x 12.5 65.50 300 x 150 x 16.0 82.50 400 x 200 x 8.0 57.60 400 x 200 x 10.0 71.50 400 x 200 x 12.5 88.60 400 x 200 x 16.0 112.00 500 x 250 x 10.0 90.00 500 x 250 x 12.5 112.00 500 x 250 x 16.0 142.00 17

SAW CUTTING OUR SAW CUTTING FACILITIES INCLUDE SEMI-AUTOMATIC BAND SAWS AND CARBIDE SAW CUTTING. Our saws all provide a fast and accurate service to meet your requirements. We can provide bevelled, bundle, repetition, square and mitre cutting services. 18

RHS HOT FORMED BS EN 10210-1 : 1994 S355J2H Size (mm) Kg/m Size (mm) Kg/m Size (mm) Kg/m 50 x 30 x 3.2 36.10 50 x 30 x 4.0 4.39 50 x 30 x 5.0 5.28 60 x 40 x 3.2 4.62 60 x 40 x 4.0 5.64 60 x 40 x 5.0 6.85 80 x 40 x 3.2 5.62 80 x 40 x 4.0 6.90 80 x 40 x 5.0 8.42 80 x 40 x 6.3 10.30 90 x 50 x 3.6 7.40 90 x 50 x 5.0 9.99 90 x 50 x 6.3 12.30 100 x 50 x 3.2 7.13 100 x 50 x 4.0 8.78 100 x 50 x 5.0 10.80 100 x 50 x 6.3 13.30 100 x 50 x 8.0 16.30 100 x 60 x 3.6 8.53 100 x 60 x 5.0 11.60 100 x 60 x 6.3 14.20 100 x 60 x 8.0 17.50 120 x 60 x 3.6 9.66 120 x 60 x 5.0 13.10 120 x 60 x 6.3 16.20 120 x 60 x 8.0 20.10 120 x 80 x 5.0 14.70 120 x 80 x 6.3 18.20 120 x 80 x 8.0 22.60 120 x 80 x 10.0 27.40 150 x 100 x 4.0 15.10 150 x 100 x 5.0 18.60 150 x 100 x 6.0 21.70 150 x 100 x 6.3 23.10 150 x 100 x 8.0 28.90 150 x 100 x 10.0 35.30 150 x 100 x 12.5 42.80 160 x 80 x 4.0 14.40 160 x 80 x 5.0 17.80 160 x 80 x 6.3 22.20 160 x 80 x 8.0 27.60 160 x 80 x 10.0 33.70 160 x 80 x 12.5 40.90 200 x 100 x 5.0 22.60 200 x 100 x 6.3 28.10 200 x 100 x 8.0 35.10 200 x 100 x 10.0 43.10 200 x 100 x 12.5 52.70 200 x 100 x 16.0 65.20 200 x 120 x 5.0 24.10 200 x 120 x 6.3 30.10 200 x 120 x 8.0 37.60 200 x 120 x 10.0 46.30 200 x 120 x 12.5 56.60 200 x 150 x 8.0 41.40 200 x 150 x 10.0 51.00 250 x 100 x 6.3 33.00 250 x 150 x 5.0 30.40 250 x 150 x 6.3 38.00 250 x 150 x 8.0 47.70 250 x 150 x 10.0 58.80 250 x 150 x 12.5 72.30 250 x 150 x 16.0 90.30 300 x 100 x 8.0 47.70 300 x 100 x 10.0 58.80 300 x 200 x 6.3 47.90 300 x 200 x 8.0 60.30 300 x 200 x 10.0 74.50 300 x 200 x 12.5 91.90 300 x 200 x 16.0 115.00 400 x 200 x 8.0 72.80 400 x 200 x 10.0 90.20 400 x 200 x 12.5 112.00 400 x 200 x 16.0 141.00 450 x 250 x 8.0 85.40 450 x 250 x 10.0 106.00 450 x 250 x 12.5 131.00 450 x 250 x 16.0 166.00 500 x 300 x 10.0 122.00 500 x 300 x 12.5 151.00 500 x 300 x 16.0 191.00 19

SHOTBLASTING AND PRIMING THE BARRETT TUBES DIVISION TAKE PRIDE IN PROVIDING THE BEST QUALITY PRODUCTS AVAILABLE. Our in house shotblasting and priming systems ensure that you, the customer, get perfectly finished products to fit your personal requirements. Our surface treatment systems have the ability to shot-blast all hollow sections, structural sections, merchant bar and plates up to 1500mm wide.all shotblasting complies with BS EN ISO 8501: 2001 SA2.5. We only ever use water-based weldable holding primer in order to give the best finish possible as well as being kinder to the environment. 20

CIRCULAR ERW TUBE BS 6323 : PART 5 : 1982 ERW 1 KM / BS EN 10305-3 : 2002 E220 Size (mm) Wall Thickness (mm) 0.7 0.8 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0 8.00 9.52 10.00 11.00 12.00 12.70 13.00 14.00 15.00 15.80 16.00 17.40 18.00 19.05 20.00 20.80 21.00 22.00 22.20 24.00 25.00 25.40 26.90 27.00 28.00 28.60 29.00 30.00 31.70 32.00 33.70 34.90 Continued over 21

CIRCULAR ERW TUBE CONT. BS 6323 : PART 5 : 1982 ERW 1 KM / BS EN 10305-3 : 2002 E220 Size (mm) Wall Thickness (mm) 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0 35.00 36.00 38.10 40.00 41.00 41.27 42.00 42.40 44.00 44.45 45.00 46.00 47.00 47.60 48.00 50.00 50.80 54.00 57.15 60.00 60.30 63.50 70.00 76.20 88.90 93.00 101.60 108.00 114.30 127.00 133.00 139.70 22

TUBE MANIPULATION SINCE EARLY 2003 WE HAVE BEEN OFFERING TUBES AND BOX SECTIONS THAT HAVE BEEN LASERED AND/OR BENT/ROLLED IN BOTH MILD STEEL AND STAINLESS STEEL. We have two mandrel tube benders which can push bend tubes and box section up to 42mm diameter. These two machines have a wide range of tooling in stock. In addition to these two machines we also have three different size ring rollers that offer variable radius bending on sections up to 120x120 square and the equivalent squares / rectangles and circular tubes subject to tooling. Just recently commissioned is an All Electric CNC Tube Bender called the ELECT 150 which offers both fixed and variable radius bends on tubes up to 150mm diameter subject to tooling. All these lasers and tube bending equipment offer unrivalled processing capability under one roof, combining the strength of a leading tube and hollow section specialist with the UK s leading laser processor. 23

SQUARE ERW TUBE BS 6323 : PART 5 : 1982 ERW 1 KM / BS EN 10305-3 : 2002 E220 Size (mm) Wall Thickness (mm) 0.7 0.8 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0 8 x 8 9 x 9 10 x 10 12 x 12 12.7 x 12.7 15 x 15 15.8 x 15.8 18 x 18 19.05 x 19.05 20 x 20 22 x 22 22.2 x 22.2 25 x 25 25.4 x 25.4 28.6 x 28.6 30 x 30 31.7 x 31.7 35 x 35 38.1 x 38.1 40 x 40 45 x 45 50 x 50 50.8 x 50.8 60 x 60 70 x 70 80 x 80 90 x 90 100 x 100 24

LT8 AT OUR DUDLEY OPERATION WE HAVE THREE OF THESE MEDIUM RANGE TUBE LASERS. Which can offer time saving weld preparations on Tubes up to 219mm o/d / Box Section up to 200 x 100 and 150x150 with equivalent Angle / Channel / Flat Bar and other special sections in finished lengths up to 8.4 metres long. Materials processed include Mild & Stainless Steel. 25

RECTANGULAR ERW TUBE BS 6323 : PART 5 : 1982 ERW 1 KM / BS EN 10305-3 : 2002 E220 Size (mm) Wall Thickness (mm) 0.7 0.8 0.9 1.0 1.2 1.5 1.6 2.0 2.5 3.0 12 x 8 20 x 10 20 x 15 25 x 10 25 x 15 25.4 x 12.7 30 x 10 30 x 15 30 x 20 30 x 25 31.7 x 15.8 34.15 x 15 34.9 x 15.8 35 x 15 35 x 20 35 x 25 38.1 x 12.7 38.1 x 19.05 38.1 x 25.4 40 x 10 40 x 15 40 x 20 40 x 25 40 x 30 44.4 x 15.8 45 x 15 45 x 20 45 x 25 50 x 10 50 x 20 50 x 25 50 x 30 50 x 34 50 x 35 50 x 40 26

RECTANGULAR ERW TUBE CONT. BS 6323 : PART 5 : 1982 ERW 1 KM / BS EN 10305-3 : 2002 E220 Size (mm) Wall Thickness (mm) 1.2 1.5 1.6 2.0 2.5 3.0 50.8 x 25.4 55 x 30 57.15 x 31.75 60 x 15 60 x 20 60 x 25 60 x 30 60 x 40 63.5 x 25.4 63.5 x 38.1 70 x 25 70 x 30 70 x 40 70 x 50 70 x 65 76.2 x 25.4 76.2 x 38.1 76.2 x 50.8 80 x 20 80 x 25 80 x 30 80 x 35 80 x 40 80 x 60 88.9 x 38.1 100 x 25 100 x 30 100 x 34 100 x 40 100 x 50 100 x 60 120 x 40 120 x 60 120 x 80 150 x 50 27

FLAT SIDED OVAL ERW BS 6323 : PART 5 : 1982 ERW 1 KM / BS EN 10305-3 : 2002 E220 Size (inches) (mm) Wall Thickness (mm) 0.81 0.91 1.02 1.22 1.42 1.50 1.63 1.83 2.03 2.34 2.50 2.64 26.30 x 15.00 28.20 x 13.20 30.00 x 15.00 30.00 x 16.00 1 1/4 x 5/8 31.75 x 15.88 35.00 x 20.00 40.00 x 17.00 40.00 x 20.00 1 5/8 x 7/8 41.28 x 22.22 45.00 x 20.00 50.00 x 20.00 50.00 x 25.00 60.00 x 30.00 ELLIPTICAL ERW BS 6323 : PART 5 : 1982 ERW 1 KM / BS EN 10305-3 : 2002 E220 Size (inches) (mm) Wall Thickness (mm) 1.22 1.42 1.50 1.63 1.83 2.03 7/8 x 1/2 22.22 x 12.70 23.50 x 13.33 26.29 x 16.21 1 1/2 x 1 38.10 x 25.40 28

HANDRAILS & WALKWAYS HANDRAILS Our handrail systems are suitable for use in all types of industry. They are ideal for any internal or external area requiring a stable edge protection barrier as well as where protection is needed against stationary or moving machinery. TUBECLAMPS Typical applications include: Platforms Mezzanines Stairways Gantries Our comprehensive range of fittings means that tubeclamps can be used both temporarily and permanently. Our tubeclamps are iron casted with a galvanised finish and have been manufactured with ease of use very much in mind. No welding, no bending, no threading. Just a hexagonal key is needed to join the tubing together. FLOORING When choosing a flooring product for your project there are a number of considerations to bear in mind - aesthetic requirements, functionality and cost implications. We have taken these into account when developing our range of flooring which offers a wide range of products to meet everyones personal needs. 29

NOMINAL BORE BS EN 10255 : 2004 Available in self colour, black or galvanised - screwed and socketed or plain end. Nominal Bore (mm) Outside Diameter (mm) (min) (max) Thickness (mm) 8 13.30 13.90 2.35 10 16.80 17.40 2.35 15 21.10 21.70 2.65 20 26.60 27.20 2.65 25 33.40 34.20 3.25 32 40.10 42.90 3.25 40 48.00 48.80 3.25 50 59.80 60.80 3.65 65 75.40 76.60 3.65 80 88.10 89.50 4.05 100 113.30 114.90 4.05 125 138.70 140.60 4.85 150 164.10 166.10 4.85 30

LT FIBER LASER THE NEW TECHNOLOGY OF THE FIBER LASER OFFERS SIGNIFICANT ADVANTAGES IN TERMS OF A WIDER RANGE OF MATERIALS THAT CAN BE PROCESSED - AMONG THEM HIGHLY-REFLECTIVE MATERIALS SUCH AS COPPER, BRASS, STAINLESS STEEL AND ALUMINIUM. We are the first steel stockholder to introduce a system of this kind to the UK. It is specifically designed and developed for cutting tubes and open profiles with the fibre laser source. Benefits of the new system include time saving, due to faster cutting speeds and a smoother cut surface on the finished products. Compared to traditional methods, laser processing offers cost savings due to the reduction in the number of processes needed. 31

BARRETT STAINLESS BARRETT STAINLESS SPECIALISE IN A UNIQUE RANGE OF FERRITIC GRADES OF STAINLESS STEEL. Our experienced team provides advice on where our steels can offer a cost, strength or corrosion advantage over conventional stainless steel grades. We offer a complete range of sheet in standard sizes and thickness in both hot and cold rolled finishes.we stock a wide range of square and rectangular hollow sections and supply customers with polished material, both sheet and box section, polycoated as required. In addition our laser cutting machines can profile complex shapes to exacting standards.these are either delivered through our network of distribution centres or stored as prepacked kits, ready for production line fabrication and delivered on a just in time basis. 32

BSF 1:4003 STAINLESS RECTANGULAR SECTIONS - 1.4003 Weight (Kg/m) Dimensions (mm) Wall Thickness (mm) 1.2 1.5 2.0 3.0 30 x 20 0.921 1.050 1.340-40 x 20 1.112 1.280 1.650-40 x 30 1.304 1.510 1.960-50 x 20 1.091 1.304 2.133 3.124 50 x 30 1.495 1.740 2.270 3.260 50 x 40 1.686 1.980 2.580 4.081 60 x 20 1.495 1.730 2.260 3.602 60 x 30 1.686 1.980 2.580 3.720 60 x 40-2.210 2.890 4.190 80 x 30-2.575 3.409 5.038 80 x 40-2.670 3.510 5.110 80 x 60-3.140 4.130 6.040 100 x 40-3.140 4.130 6.040 100 x 50 - - - 6.510 100 x 60-3.600 4.750 6.970 100 x 80-4.250 5.641 8.387 110 x 70 - - 5.370 7.900 120 x 40-3.600 4.750 6.970 120 x 60-4.070 5.370 7.900 120 x 80-4.530 5.990 8.830 140 x 80 - - - 9.760 150 x 50-4.530 5.990 8.830 150 x 100 - - 7.874 11.736 160 x 80 - - 7.555 11.250 Continued over 33

BSF 1:4003 STAINLESS CONT. SQUARE SECTIONS 1:4003 Weight in KG per metre Dimensions (mm) Wall Thickness (mm) 1.5 2.0 3.0 4.0 20 x 20 0.81 1.03 - - 30 x 30 1.28 1.65 - - 35 x 35 1.51 1.96 2.79-40 x 40 1.74 2.27 3.26 4.14 50 x 50 2.21 2.89 4.19 5.38 60 x 60 2.67 3.51 5.11 6.62 70 x 70 3.14 4.13 6.04-80 x 80 3.60 4.75 6.97 9.09 COLD ROLLED SHEET 1:4003 Thickness (mm) Approx Weight (kg) 2000 x 1000 2500 x 1250 3000 x 1500 1.0-24 - 1.2 20 29-1.5 24 36 54 2.0 - - 72 Other sizes and thicknesses available 34

BSF 1:4003 STAINLESS CONT. QUARTO PLATE 1:4003 Thickness (mm) Approx Weight (kg) 2500 x 1250 3000 x 1500 6000 x 1500 12.0 300 432 864 16.0-591 1181 20.0-738 1476 25.0 - - 1845 30.0 - - 2214 Other sizes and thicknesses available HOT ROLLED SHEET 1:4003 Thickness (mm) Approx Weight (kg) 2000 x 1000 2500 x 1250 3000 x 1500 6000 x 1500 2.0 32 50 72-3.0 48 75 108 216 4.0 64 100 144 288 5.0 80 125 180 360 6.0 96 150 216 432 8.0 128 200 288 576 10.0-250 360 720 Other sizes and thicknesses available 35

BSF 441 STAINLESS RECTANGULAR SECTIONS - BSF 441 Weight (Kg/m) Dimensions (mm) Wall Thickness (mm) 1.2 1.5 2.0 3.0 30 x 20 0.921 1.050 1.340-40 x 20 1.112 1.280 1.650-40 x 30 1.304 1.510 1.960-50 x 20 1.091 1.304 2.133 3.124 50 x 30 1.495 1.740 2.270 3.260 50 x 40 1.686 1.980 2.580 4.081 60 x 20 1.495 1.730 2.260 3.602 60 x 30 1.686 1.980 2.580 3.720 60 x 40-2.210 2.890 4.190 80 x 30-2.575 3.409 5.038 80 x 40-2.670 3.510 5.110 80 x 60-3.140 4.130 6.040 100 x 40-3.140 4.130 6.040 100 x 50 - - - 6.510 100 x 60-3.600 4.750 6.970 100 x 80-4.250 5.641 8.387 110 x 70 - - 5.370 7.900 120 x 40-3.600 4.750 6.970 120 x 60-4.070 5.370 7.900 120 x 80-4.530 5.990 8.830 140 x 80 - - - 9.760 150 x 50-4.530 5.990 8.830 150 x 100 - - 7.874 11.736 160 x 80 - - 7.555 11.250 36

BSF 441 STAINLESS CONT. SQUARE SECTIONS - BSF 441 Weight (KG/m) Dimensions (mm) Wall Thickness (mm) 1.2 1.5 2.0 3.0 20 x 20 0.814 1.030 1.176-25 x 25 0.873 1.140 1.495 2.167 30 x 30 1.280 1.650 1.814 2.645 35 x 35 1.510 1.960 2.133 3.124 40 x 40 1.740 2.270 2.452 3.602 50 x 50 2.210 2.890 3.090 4.559 60 x 60 2.670 3.510 3.728 5.516 70 x 70 3.140 4.130 4.370 6.470 80 x 80 3.600 4.750 5.000 7.430 100 x 100 - - 6.280 9.430 COLD ROLLED SHEET - BSF 441 Thickness (mm) Sheet Size 0.8 1.0 1.2 1.5 2.0 3.0 4.0 5.0 2000 x 1000 - - - 2500 x 1250 3000 x 1500 - - Other sizes and thicknesses available HOT ROLLED SHEET - BSF 441 Thickness (mm) Sheet Size 2.0 3.0 4.0 5.0 6.0 2000 x 1000 - - - - 2500 x 1250 3000 x 1500 Other sizes and thicknesses available Continued over 37

BSF 441 STAINLESS CONT. ROUND TUBE - BSF 441 Dimensions (mm) Outside Dia. Weight (KG/m) Wall Thickness (mm) 1.2 1.5 2.0 25 0.694 0.856 1.117 25.4 0.705 0.871 1.137 26.9 0.723 0.925 1.209 28 0.749 0.965 1.263 30 0.781 1.038 1.360 32 0.839 1.111 1.457 33.7 0.898 1.173 1.540 35 0.985 1.220 1.603 38.1 1.072 1.333 1.753 40 1.075 1.402 1.846 42.4 1.131 1.490 1.962 45 1.276 1.585 2.088 48 1.364 1.694 2.234 48.3 1.373 1.705 2.249 50.8 1.445 1.796 2.370 60 1.714 2.131 2.817 60.3 1.722 2.142 2.832 63.5 1.816 2.258 2.987 76.1 2.183 2.717 3.599 38

FASTEC HANDRAIL SYSTEM WE ARE NOW TRUSTED SUPPLIERS OF THE FASTEC HANDRAIL SYSTEM. Fastec Handrail Systems specialise in the supply and delivery of off-the-shelf stainless steel modular handrail fittings. Extensive use of stainless steel and glass is a hallmark of today s contemporary and minimalist design. Fastec have developed ranges of structural glass and stainless steel balustrade systems providing comprehensive design solutions that are functionally practical and, above all visually dramatic. PREMIUM QUALITY PRODUCT FREE FIXINGS SUPERIOR CORROSION RESISTANCE WITH G316 s TESTED TO BS6399-1:1996 UK DESIGNED PRODUCT 39

BARRETT Tubes Division