Rittal WM Enclosures
Precision engineered, even where it doesn t show Details on the back side hint at the engineering innovations WM enclosures incorporate, inside and out! 2
Engineered to make the small stuff matter. Rittal WM stainless steel enclosures protect critical equipment in harsh environments under the most demanding conditions by paying attention to design elements like blind nuts on the back side that insure a snug fit and make flush-to-the-wall installations a snap. When precision instruments, measuring tools and critical controls need protection from the elements, inside or out, Rittal s durable, onepiece, space-saving wallmount designs are easy to install and maintain. Stainless steel enclosures are available in a variety of shapes, sizes and configurations for use in the most demanding environments with a range of critical protection ratings from UL Type 12 to Type 4X and for use in sensitive areas in a variety of industrial settings. Enhancing the lineup of standard wallmounted enclosures are slope top units and specialized designs incorporating flangemounting configuration featuring a universal disconnect cutout. The slope top models have a 20-degree overhanging sloped roof to accoodate a variety of specialized installations. Backed by the Rittal System approach to accessories and support, there s a WM stainless steel unit ready to take on your challenges. Standard features include: 304 and 316L stainless steel construction Blind nut mounting Secure locking system Foamed-on gaskets Zinc-plated mounting panels Protection ratings for the most demanding conditions Detailed drawings are available at www.rittal.us. 3
WM Enclosures Single Door, Disconnect, Slope Top UL Type 12, 3R, 4, 4x Single Door Type 304, 316L Configuration: One-piece enclosure body Left-hand hinge Slotted head insert Single door WM less than 20 high have one ¼ turn latch Single door WM 20-40 high have two ¼ turn latches Single door WM enclosures greater than or equal to 42 high have an L-Handle Includes mounting panel Wall-mounting blind nuts Foamed-in-place gasket Configuration: One-piece enclosure body Left-hand hinge Universal disconnect cut-out 2 or 3-point latching L-handle Includes mounting panel Wall-mounting blind nuts Foamed-in-place gasket Finish: Enclosure and door: #4 Brushed Mounting panel: Zinc-plated carbon steel Material: Type 304 stainless steel Enclosure and door: 12 H x 12 W 24 H x 20 W: 16 ga body/ 16 ga door 24 H x 24 W 36 H x 24 W: 16 ga body/ 14 ga door Finish: Enclosure: #4 Brushed Mounting panel: Zinc-plated carbon steel Material: Type 304 stainless steel Enclosure and door: 14 ga body/ 14 ga door except for 24 x 26-16 ga body/14 ga door 36 H x 30 W 60 H x 36 W: 14 ga body/ 14 ga door Protection rating: Single door enclosures: UL/cUL Type 12 (IP 55 to EN 60 529/10.91) UL/cUL Type 3R UL/cUL Type 4 (IP 66 to EN 60 529/10.91) UL/cUL Type 4X (IP 66 to EN 60 529/10.91) UL Type 12, 3R, 4, 4x Disconnect Type 304, 316L Protection rating: UL/cUL Type 12 (IP 55 to EN 60 529/10.91) UL/cUL Type 3R UL/cUL Type 4 (IP 66 to EN 60 529/10.91) UL/cUL Type 4X (IP 66 to EN 60 529/10.91) UL Type 1, 12, 3R, 4, 4x Slope Top Type 304, 316L Configuration: One-piece enclosure body Left-hand hinge 20 overhanging sloped roof Slotted head spring loaded insert Single door WMS less than 20 high have one ¼ turn latch Single door WMS 20-40 high have two ¼ turn latches Single door WMS enclosures greater than or equal to 42 high have an L-Handle Includes mounting panel Wall-mounting blind nuts Foamed-in-place gasket Finish: Enclosure and door: #4 Brushed Mounting panel: Zinc-plated carbon steel Material: Type 304 stainless steel Enclosure and door: 16 H x 12 W 24 H x 20 W: 16 ga body / 16 ga door 24 H x 24 W 30 H x 24 W: 16 ga body / 14 ga door 30 H x 30 W 60 H x 36 W: 14 ga body / 14 ga door Protection rating: UL/cUL Type 1, 12, 3R, 4, 4X UL file #: E170282 Understanding the Part Number WM S 16 12 08 N 4 Product Type Height Width Depth Material 4 = 304 6 = 316L Slope Top Version Disconnect N = Non-disconnect X = Disconnect 4 Metric measurements for are exact, imperial measurements are rounded Rittal WM Enclosures
WM Enclosures UL Type 12, 3R, 4, 4x Single Door Type 304, 316L Rittal s WM enclosure sets the standard for maximum use of space and ease of installation WM compact enclosures can be used for virtually any application. A secure locking system, foamed-on gasket and knife-edge perimeter ensure NEMA protection ratings. Features include a one-piece body of durable 304 or 316L stainless steel rated to stand up to the harshest environments. Description Door(s) Mounting Panel (included) 1) WM121206N4 WM 12x12x6 Type 304 1 12x12x6 300x300x150 WMMP1212 11x10 275x254 WM161206N4 WM 16x12x6 Type 304 1 16x12x6 400x300x150 WMMP1612 15x10 375x254 WM161606N4 WM 16x16x6 Type 304 1 16x16x6 400x400x150 WMMP1616 15x14 375x354 WM201606N4 WM 20x16x6 Type 304 1 20x16x6 500x400x150 WMMP2016 19x14 475x354 WM202006N4 WM 20x20x6 Type 304 1 20x20x6 500x500x150 WMMP2020 19x18 475x449 WM161208N4 WM 16x12x8 Type 304 1 16x12x8 400x300x210 WMMP1612 15x10 375x254 WM201608N4 WM 20x16x8 Type 304 1 20x16x8 500x400x210 WMMP2016 19x14 475x354 WM202008N4 WM 20x20x8 Type 304 1 20x20x8 500x500x210 WMMP2020 19x18 470x449 WM241608N4 WM 24x16x8 Type 304 1 24x16x8 600x400x210 WMMP2416 22x14 570x354 WM242008N4 WM 24x20x8 Type 304 1 24x20x8 600x500x210 WMMP2420 22x18 570x449 WM242408N4 WM 24x24x8 Type 304 1 24x24x8 600x600x210 WMMP2424 22x22 570x549 WM302408N4 WM 30x24x8 Type 304 1 30x24x8 760x600x210 WMMP3024 29x22 730x549 WM303008N4 WM 30x30x8 Type 304 1 30x30x8 760x760x210 WMMP3030 29x28 730x704 WM362408N4 WM 36x24x8 Type 304 1 36x24x8 900x600x210 WMMP3624 34x22 870x549 WM363008N4 WM 36x30x8 Type 304 1 36x30x8 900x760x210 WMMP3630 34x28 870x704 WM242010N4 WM 24x20x10 Type 304 1 24x20x10 600x500x250 WMMP2420 22x18 570x449 WM302410N4 WM 30x24x10 Type 304 1 30x24x10 760x600x250 WMMP3024 29x22 730x549 WM303010N4 WM 30x30x10 Type 304 1 30x30x10 760x760x250 WMMP3030 29x28 730x704 WM363010N4 WM 36x30x10 Type 304 1 36x30x10 900x760x250 WMMP3630 34x28 870x704 WM483610N4 WM 48x36x10 Type 304 1 48x36x10 1200x900x250 WMMP4836 45x33 1155x840 WM242412N4 WM 24x24x12 Type 304 1 24x24x12 600x600x300 WMMP2424 23x22 570x549 WM302412N4 WM 30x24x12 Type 304 1 30x24x12 760x600x300 WMMP3024 29x22 730x549 WM363012N4 WM 36x30x12 Type 304 1 36x30x12 900x760x300 WMMP3630 34x28 870x704 WM363612N4 WM 36x36x12 Type 304 1 36x36x12 900x900x300 WMMP3636 34x33 870x840 WM423612N4 WM 42x36x12 Type 304 1 42x36x12 1050x900x300 WMMP4236 40x33 1020x840 WM483612N4 WM 48x36x12 Type 304 1 48x36x12 1200x900x300 WMMP4836 45x33 1155x840 WM603612N4 WM 60x36x12 Type 304 1 60x36x12 1500x900x300 WMMP6036 57x33 1455x840 WM363016N4 WM 36x30x16 Type 304 1 36x30x16 900x760x400 WMMP3630 34x28 870x704 WM483616N4 WM 48x36x16 Type 304 1 48x36x16 1200x900x400 WMMP4836 46x33 1155x840 WM603616N4 WM 60x36x16 Type 304 1 60x36x16 1500x900x400 WMMP6036 57x33 1455x840 1) To order mounting panel in stainless steel add S6 to the end of the part number. Note: To order WM wallmount enclosures in Type 316L stainless steel replace N4 ending with N6 (extended delivery times). UL Type 12, 3R, 4, 4x Disconnect Type 304, 316L Rittal s WM FMD enclosure sets the standard for maximum use of space and ease of installation. Rittal s WM compact enclosures can be used for virtually any application. NEMA protection ratings are ensured through a secure locking system, foamed-on gasket, and knife-edge perimeter. Features include a body constructed of cold rolled steel, steel doors, and included mounting panel. Description Door(s) Mounting Panel (included) 1) WM242608X4 WM 24x26x8 Type 304 1 24x26x8 600x650x210 WMMP2426 22x22 570x549 WM363208X4 WM 36x32x8 Type 304 1 36x32x8 900x825x210 WMMP3630 34x28 870x704 WM363210X4 WM 36x32x10 Type 304 1 36x32x10 900x825x250 WMMP3630 34x28 870x704 WM603810X4 WM 60x38x10 Type 304 1 60x38x10 1500x975x250 WMMP6036 57x33 1455x840 WM363212X4 WM 36x32x12 Type 304 1 36x32x12 900x825x300 WMMP3630 34x28 870x704 WM423212X4 WM 42x32x12 Type 304 1 42x32x12 1050x825x300 WMMP4230 40x33 120x840 WM483812X4 WM 48x38x12 Type 304 1 48x38x12 1200x975x300 WMMP4836 45x33 1155x840 WM603612X4 WM 60x38x12 Type 304 1 60x38x12 1500x975x300 WMMP6036 57x33 1455x840 WM483816X4 WM 48x38x16 Type 304 1 48x38x16 1200x975x400 WMMP4836 46x33 1155x840 1) To order mounting panel in stainless steel add S6 to the end of the part number. Note: To order WM wallmount enclosures in Type 316L stainless steel replace N4 ending with N6 (extended delivery times). Rittal WM Enclosures Metric measurements for are exact, imperial measurements are rounded 5
WM Enclosures, Accessories UL Type 1, 12, 3R, 4, 4x Slope Top Type 304, 316L Rittal s innovative slope top wallmount enclosure is designed for food/beverage and pharmaceutical applications or any environment where sanitation concerns require frequent washdowns. The 20 overhanging sloped roof prevents standing water from accumulating on top of the enclosure and door opening. Description Door(s) Mounting Panel (included) 1) WMS161208N4 WM 16x12x8 Type 304 1 16x12x8 395x300x210 WMMP1612 15x10 375x254 WMS161608N4 WM 16x16x8 Type 304 1 16x16x8 395x400x210 WMMP1616 15x14 375x354 WMS201608N4 WM 20x16x8 Type 304 1 20x16x8 495x400x210 WMMP2016 19x14 475x354 WMS202008N4 WM 20x20x8 Type 304 1 20x20x8 495x500x210 WMMP2020 19x18 475x449 WMS242008N4 WM 24x20x8 Type 304 1 24x20x8 595x500x210 WMMP2420 22x18 570x449 WMS242408N4 WM 24x24x8 Type 304 1 24x24x8 595x600x210 WMMP2424 22x22 570x549 WMS302408N4 WM 30x24x8 Type 304 1 30x24x8 755x600x210 WMMP3024 29x22 730x549 WMS303008N4 WM 30x30x8 Type 304 1 30x30x8 755x760x210 WMMP3030 29x28 730x704 WMS363008N4 WM 36x30x8 Type 304 1 36x30x8 895x760x210 WMMP3630 34x28 870x704 WMS201612N4 WM 20x16x12 Type 304 1 20x16x12 495x400x300 WMMP2016 19x14 475x354 WMS202012N4 WM 20x20x12 Type 304 1 20x20x12 495x500x300 WMMP2020 19x18 475x449 WMS242412N4 WM 24x24x12 Type 304 1 24x24x12 595x600x300 WMMP2424 22x22 570x549 WMS302412N4 WM 30x24x12 Type 304 1 30x24x12 755x600x300 WMMP3024 29x22 730x549 WMS363012N4 WM 36x30x12 Type 304 1 36x30x12 895x760x300 WMMP3630 34x28 870x704 WMS363612N4 WM 36x36x12 Type 304 1 36x36x12 895x900x300 WMMP3636 34x33 870x804 WMS363016N4 WM 36x30x16 Type 304 1 36x30x16 895x760x400 WMMP3630 34x28 870x704 WMS483616N4 WM 48x36x16 Type 304 1 48x36x16 1195x900x400 WMMP4836 45x33 1155x840 WMS603616N4 WM 60x36x16 Type 304 1 60x36x16 1495x900x400 WMMP6036 57x33 1455x840 1) To order mounting panel in stainless steel add S6 to the end of the part number. Note: To order WM wallmount enclosures in Type 316L stainless steel replace N4 ending with N6 (extended delivery times). Window Kits Window Height Window Width Frame Height Frame Width Type 304 Type 316L 5 (127) 3 (76) 8 (191) 6 (140) WK05034 WK05036 9 (229) 6 (140) 12 (292) 8 (203) WK09054 WK09056 13 (330) 3 (76) 16 (394) 6 (140) WK13034 WK13036 13 (330) 8 (203) 16 (394) 11 (267) WK13084 WK13086 17 (432) 6 (140) 20 (495) 8 (203) WK17054 WK17056 17 (432) 11 (279) 20 (495) 14 (343) WK17114 WK17116 23 (584) 15 (381) 26 (648) 18 (445) WK23154 WK23156 29 (737) 19 (483) 32 (800) 22 (546) WK29194 WK29196 35 (889) 23 (584) 38 (953) 26 (648) WK35234 WK35236 Handles, Inserts & Padlock Accessories Description PU Thumb-Turn Handles Thumb-turn handle, Type 316L stainless steel, padlockable 1 WMQTPLS6 Thumb-turn handle, Type 316L stainless steel, key lockable 1 WMQTKLS6 L-Handles L-Handle - Type 316L stainless steel 1 WMLHNLS6 L-Handle padlock - Type 316L stainless steel 1 WMLHPLS6 L-Handle keylock - Type 316L stainless steel 1 WMLHKLS6 Padlock Accessories 2 piece padlock lockout - Type 316L stainless steel 1 WMPADS6 1 piece padlock lockout - Type 316L stainless steel 1 WMPADRS6 6 Metric measurements for are exact, imperial measurements are rounded Rittal WM Enclosures
Rails for Interior Installation Enclosure Depth PU WM Enclosure Accessories Carbon Steel 8 (210) 4 2373.210 10 (250) 4 2373.250 12 (300) 4 2373.300 Grounding Straps Connection Cross Section AWG Length PU M6 M8 12 7 (170) 5 2564.010 M6 M8 8 12 (300) 5 2565.110 Wallmount Brackets Material Stand-off, Type 316L Wall clearance PU 0.4 (10) 4 2433.500 Universal, Flush-mount 4 WMUMB6 Slotted, Flush-mount 4 WMSMB6 *Without assembly hardware. Plastic Print Pockets Page Format Height Width Depth A3 landscape 11 (286) 17 (438) 2 (45) 2513.000 A4 portrait 10 (254) 9 (228) 1 (17) 2514.000 A5 landscape 7 (174) 9 (228) 1 (17) 2515.000 Dead Front Kits Enclosure Height Enclosure Width Carbon Steel 12 (305) 12 (305) DFK1212C 16 (406) 12 (305) DFK1612C 16 (406) 16 (406) DFK1616C 16 (406) 20 (508) DFK1620C 20 (508) 16 (406) DFK2016C 20 (508) 20 (508) DFK2020C 20 (508) 24 (610) DFK2024C 24 (610) 16 (406) DFK2416C 24 (610) 20 (508) DFK2420C 24 (610) 24 (610) DFK2424C 24 (610) 30 (762) DFK2430C 30 (762) 20 (508) DFK3020C 30 (762) 24 (610) DFK3024C 30 (762) 30 (762) DFK3030C 36 (914) 24 (610) DFK3624C 36 (914) 30 (762) DFK3630C 36 (914) 36 (914) DFK3636C 42 (1067) 30 (762) DFK4230C 42 (1067) 36 (914) DFK4236C 48 (1219) 36 (914) DFK4836C 60 (1524) 36 (914) DFK6036C 72 (1829) 36 (914) DFK7236C Floor Stand Kits Height Depth Type 304 Type 316L 12 (305) 6 (152) FSK12064 FSK12066 18 (457) 6 (152) FSK18064 FSK18066 24 (610) 6 (152) FSK24064 FSK24066 12 (305) 8 (203) FSK12084 FSK12086 18 (457) 8 (203) FSK18084 FSK18086 24 (610) 8 (203) FSK24084 FSK24086 12 (305) 10 (254) FSK12104 FSK12106 18 (457) 10 (254) FSK18104 FSK18106 24 (610) 10 (254) FSK24104 FSK24106 12 (305) 12 (305) FSK12124 FSK12126 18 (457) 12 (305) FSK18124 FSK18126 24 (610) 12 (305) FSK24124 FSK24126 12 (305) 16 (406) FSK12164 FSK12166 18 (457) 16 (406) FSK18164 FSK18166 24 (610) 16 (406) FSK24164 FSK24166 12 (305) 20 (508) FSK12204 FSK12206 18 (457) 20 (508) FSK18204 FSK18206 24 (610) 20 (508) FSK24204 FSK24206 Rittal WM Enclosures Metric measurements for are exact, imperial measurements are rounded 7
Enclosures Power Distribution Climate Control IT Infrastructure Software & Services The Rittal Corporation is the U.S. subsidiary of Rittal GmbH & Co. KG and manufactures the world s leading industrial and IT enclosures, racks and accessories, including climate control and power management systems for industrial, data center, outdoor and hybrid applications. For more information about Rittal and its products, please visit www.rittal.us or call 1-800-477-4000. Rittal Corporation 1 Rittal Place Urbana Ohio 43078 USA Woodfield Corporate Center 425 North Martingale Road, Suite 400 Schaumburg Illinois 60173 USA Phone: 937-399-0500 Fax: 800-477-4003 Toll-free: 800-477-4000 Email: rittal@rittal.us Online: www.rittal.us 07/13 US213 Rittal Systems Ltd. 6485 Ordan Drive Mississauga Ontario L5T 1X2 Canada Phone: 905-795-0777 Fax: 905-795-9548 Toll-free: 800-399-0748 Email: marketing@rittal.ca Online: www.rittal.ca