SRC 4000 WIRELESS FIRE DETECTION SYSTEM

SRC 4000 WIRELESS FIRE DETECTION SYSTEM

SIMPLE. WITH A SYSTEM INNOVATIVE WIRELESS TECHNOLOGY Especially larger buildings with multiple floors are a challenge for fire detection systems. In case of fires in areas, which are difficult to access, like basements or lofts, the fire detection must be granted as well. In addition the architecture and structure has become more complex and flexible in terms of separations, which makes it more difficult and costly to install wired systems. Furthermore many buildings are not up to date in terms of fire protection. Each retrofit of existing buildings gets the opportunity to be protected EN54 compliant at reasonable costs. In modern buildings often design elements are a used to make the building more attractive and interesting. In order to allow, for example, natural lighting, increasingly fronts are equipped with glass elements and multilevel areas illuminated with skylights. Greater influence on the design of ceiling and room shapes is made possible by using modern materials. In such scenarios, there are limitations to connect components via wires to the fire detection panel. SIMPLY WIRELESS: SRC 4000 WITH WIRELESS 54 TECHOLOGY The fire alarm system SRC 4000 will simply meet your expectations but also being different. It is entirely wireless. The wireless fire alarm system comes with a high-quality metal housing and can manage 100 fully automatic addressable wireless components as well as its 10 wireless repeater. Two integrated wireless transceiver Wireless 54 provide reliable wireless data exchange between the panel and its system components. A light version of the PC-assistent Wireless 54 helps to set up as well as managing and maintaining the system. We dislike being interrupted. The technology Wireless 54 is as reliable as a wired system. Through cascaded RF repeater, the radio distance of the panel can be extended up to four times. Based upon the quality of the signal, routing will be optimized and selected automatically. For traceability reasons, all data are strored and accessable inside the main control unit. Simply efficient And for the rest, there is the Wireless Assistant 54 it provides assistance for setting up the system, assigning alarm areas, check transmission and alarm channels, check the transmission channels rate or maintain the system on site or via remote monitoring.

TAILORMADE: FITS IN EVERY BUILDING If you want to be EN 54, DIN 14675, BS 5839 compliant, just configure the system accordingly, and all is set and done. This simply opens up new opportunities for the wireless fire alarm technology. Retrofitting of schools, colleges, hotel establishments, industrial and office buildings, just to name a few. BENEFITS OF THE SRC 4000 PERFECT TEAMWORK New generation of fast and monitored wireless transmission with Wireless 54 Easy installation and extension in complex buildings Best in class of energy performance Saves buildings and budget Full docomentation with Assistant 54 software Complies to EN 54 BS und VdS Versatile to configure, suitable for any building Uses powerful battery packs in all components The wireless SRC 4000 fire detection system results from a cooperation of 2 well-known companies in the fire detection industry. Job Detectomat; a well-established system supplier in the fire detection industry and SeCa GmbH, as manufacturer in the european fire detection industry developing systems for wireless data transmission. These two companies have brought together their know-how and many years of experience to develop a new generation of wireless fire alarm systems based on EN 54-25.

FEATURES SRC 4000 Wireless fire control Panel with Assistent Wireless 54 Administration of 100 individually automatic wireless devices and up to 10 wireless repeaters in four freely selectable alarm areas Integrated emergency power supply for 36 hours emergency operation Audible and visual signalling of alarms and faults (battery replacement, unauthorized removal from the installation, fault of the wireless communication) LCD display with plain text display for detailed information about the events Two potential-free relay outputs and two outputs 24 V / 300 ma to connect wired signaling devices Two integrated wireless transceiver Wireless 54 for a reliable wireless communication according to EN 54-25 PC software assistent Wireless 54 ensures a high operating comfort and the use of the following functions: - Remote support for the system through an integreated gateway - Definition of alarm areas by assignment of the acoustic signalling devices in case of alarm - Extensive engineering and service functions such as analyzer, check of transmission and alert channels, rating of the transmission channels - maintenance made simple and efficient thanks to battery and signal strength measurement, event memory for more than one million entries, startup and maintenance protocols TECHNICAL DATA Power supply 230 V AC +/-10% with integrated power suppy Emergency power supply Battery 12 V / 7,2 Ah, 2 A fuse for appr. 36 hours Protection class I/protective earthing Rated current appr. 215 ma without external Alarm current appr. 370 ma without external Supply voltage max. 0,7 A /24 V Output 2 potential free relay Outputs 3 A / 50 V AC, 3 A / 60 V AC, 2 Outputs 24 V /300 ma monitored for signalling devices Interface 1 x USB Interface for configuration and service Acoustic signal Piezo buzzer Display LEDs and LCD cleartext display Radio Transmission SRD-band 868 to 870 MHz Operating temperature -5 C to + 40 C Humidity max 96% not condensing IP-class IP 30 Material, colour sheet metal. cover similar to RAL 9006, base similar to RAL 7021 Dimensions (H x W x D): 288 mm x 320 mm x 70 mm Weight appr. 7,7 kg Standards EN 300220, EN 60950, EN 54-2, EN 54-4 und EN 54-25

SRC 4000 TRANSMISSION WITHOUT WIRES The new generation of wireless fire detection systems combines state of the art fire detection technology with a modern wireless technology. The wireless connection is as reliable as a wired system. Wireless 54 The wireless fire detection system SRC 4000 works with the innovative protected wireless technology Wireless 54. The vision of a safe wireless transmission without communication failures becomes reality with Wireless 54. Wireless 54 not only fulfills the requirements of the EN 52 part 25 it additionally offers you data communication on a level which up to now can only be offered by wired systems. In case there are extensions or changes inside the project you have highest flexibility to adjust with Wireless 54 technology. In each system up to 10 wireless repeater can be implemented this way the range of the system can be extended by four times. Wireless sounder Wireless sounder for acoustic signalling of alarms according EN 53-3, for warning persons in case of fire Wireless manual call point Wireless manual call point, to generate an manual alarm on the wireless fire control panel according EN 54-11 and EN 54-25 Wireless manual call point Wireless manual call point, to generate an manual alarm on the wireless fire control panel according EN 54-11 and EN 54-25 Fire detector Wireless multi criteria detector for earliest detection of fires via optical smoke and heat measurement according EN 54-7, EN 54-5 and EN 54-25 SRC 4000 Wireless input/output module Wireless input/output module with 4 in- and outputs for the connection of external devices Wireless repeater Wireless repeater for an extension of the radio distance between the wireless fire control panel and the wireless devices according EN 54-18, EN 54-25, EN 54-4 Wireless fire control panel Wireless fire control panel according EN 54-2, EN 54-4 and EN 54-25

Detectomat GmbH An der Strusbek 5 22926 Ahrensburg +49-4102-2114-60 job-group.de