ASA/ANSI Flanges and Fittings

S/NSI langes and ittings

Section 7 Table of ontents &N orporation S/NSI langes and ittings S/NSI Section Introduction...7.3 7.5 S/NSI langes and ittings S/NSI Hardware Introduction...7.6 olt Kits...7.7 daptive olt Hole ushing...7.7 Viton O-Rings...7.7 S/NSI langes Introduction... 7.8 & 7.9 100S langes (4.25 O..) ixed, Rotatable, Grooved... 7.10 & 7.11 150S langes (5.00 O..) ixed, Rotatable, Grooved... 7.12 & 7.13 200S langes (6.00 O..) ixed, Rotatable, Grooved... 7.14 & 7.15 300S langes (7.50 O..) ixed, Rotatable, Grooved... 7.16 & 7.17 400S langes (9.00 O..) ixed, Rotatable, Grooved... 7.18 & 7.19 600S langes (11.0 O..) ixed, Rotatable, Grooved... 7.20 & 7.21 800S langes (13.5 O..) ixed, Rotatable, Grooved...7.22 & 7.23 1000S langes (16.5 O..) ixed, Rotatable, Grooved... 7.24 & 7.25 S/NSI ittings Introduction... 7.26 & 7.27 Half Nipple...7.28 & 7.29 Nipple... 7.30 & 7.31 lexible Nipple... 7.32 & 7.33 Reducer Nipple, Straight...7.34 & 7.35 45 lbow... 7.36 & 7.37 90 lbow, Radius... 7.38 & 7.39 90 lbow, Mitered... 7.40 & 7.41 Tee... 7.42 & 7.43 ross... 7.44 & 7.45 5-Way ross... 7.46 & 7.47 6-Way ross... 7.48 & 7.49 Hybrid dapters...7.50 &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.2 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S/NSI lange System Section 7 High Vacuum omponents Since 1965 &N orporation S/NSI onversion hart S/NSI langes S NSI &N Reference# 4.25 1.0 100S 5.00 1.5 150S 6.00 2.0 200S 7.50 3.0 300S 9.00 4.0 400S 11.00 6.0 600S 13.50 8.0 800S 16.00 10.0 1000S ackground Overview: S/NSI flanges provide a complete range of fittings to mount with tubing sized 1 up to 12 diameter. The flange system consists of two flanges, a sealing ring and bolt fasteners to compress the seal between the two flanges. pair of S/NSI flanges must have one grooved flange to accept the sealing ring and one smooth face flange onto which the seal will be made. To ease system assembly rotatable flanges are available for bolt hole alignment. &N offers a complete line of flanges, fittings, valves, traps and accessories with S/NSI connections that can be used to create a complete vacuum system or pumping line. Specifications Vacuum Rated to 1X10-8 Torr. Leak Rating < 1x10-9 std. cc/s helium Temperature Range: -20 to 200 Standard Sizes: 5" to 16" O.. (for tubing diameter 1" up to 12") Materials: - langes and ittings: 304 Stainless Steel - lastomer Seals: Viton eatures Re-usable flanges and seals Rotatable flanges for easier bolt hole alignment dapters to other flange systems available Interchangeable with all other flanges and assemblies made to 150lb. NSI/S standards &N s S/NSI flanges and fittings are manufactured for compatibility with 150lb. S flanges and 150 NSI flanges. The S/NSI flange specification was originally created for use with steam pipes. Now adapted for vacuum use the system utilizes a Viton elastomer seal and is capable of achieving high vacuum pressure levels. ll flanges offered by &N orporation are manufactured on state-of-the-art N (computer controlled) lathes to ensure consistency with dimensional tolerances, and extremely fine surface finishes. Water soluble, non-sulfur based coolants are used during the manufacturing process. The flanges are cleaned in an ultrasonic de-ionized water based cleaning system and vacuum packaged free from visible particulates and oils, ready for immediate use in any vacuum application ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.3

Section 7 S lange System &N orporation High Vacuum omponents Since 1965 Rotatable S lange ixed S lange with O-Ring Groove Insert O-ring S/NSI Standard Sealing ssemblies The S/NSI flange system provides a complete range of flanges to mount with tubing sized 1 up to 12 diameter. The S/NSI seal assembly consists of 3 types of sub-components, two flanges, a sealing o- ring and a bolt fastener kit to compress the seal between the two flanges. S/NSI langes are available two general styles; fixed and rotatable. ixed flanges have a set bolt hole orientation while rotatable flanges have a two piece design allowing for bolt hole rotation to ease bolt alignment when mating the two flanges. The two pieces of the rotatable S/NSI flange are called the insert and the housing (in which the bolt holes are machined). When installing these components the housing is placed behind the insert on the tubing prior to welding the insert to the tubing. oth fixed and rotatable flanges are available with an o-ring groove. ll S/NSI sealing assemblies must include 1 smooth face S/NSI flange and 1 grooved face flange. The sealing o-ring is placed into the groove prior to compressing the flanges together with a bolt kit. langes in this system are sized according to the nominal internal diameter for the tubing onto which they will be welded. When adding new flanges to an existing vacuum line, valve or chamber carefully compare all dimensions to be sure you are ordering a compatible flange. The most important dimensions to consider are the bolt circle diameter and the internal diameter of the flanges. &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com S/NSI o-ring seals are made of Viton elastomer. Viton seals are capable of high vacuum pressures and temperatures as high as 150 (200 intermittent use). The sealing ring is placed into the grooved flange and compressed against the smooth sealing face of the mating flange. Viton gaskets are re-usable and can be used many times to make new vacuum tight seals. S/NSI asteners are bolts, nuts and washers made of high tensile strength stainless steel. olts and nuts are offered with standard hex-head design. &N offers a complete line of flanges, fittings, valves, traps, and accessories with S/NSI connections that can be used to create a complete vacuum system or pumping line. 7.4 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S lange System Section 7 High Vacuum omponents Since 1965 &N orporation S/NSI Standard Sealing ssemblies sealing pair of S/NSI flanges contains 1 flange with a smooth face and 1 flange with an o-ring groove machined into the surface. Viton sealing o-ring is placed into the groove of one of the two flanges. The flanges compress the o-ring as the fastening bolts are tightened. The o-ring cold flows under this pressure and fills microscopic surface imperfections on the sealing flange face creating a vacuum tight seal capable of withstanding temperature extremes from 20 up to 200 and pressures as low as 1X10-8 Torr. Viton O-ring daptive asteners The adaptive bolt hole bushing reduces a 3/4 bolt hole down to a 3/8 bolt hole. This is commonly used to connect an S/NSI flange (sizes 200, 300 or 400) to a gate valve with a matching flange. The S/NSI flange on the gate valve will have tapped bolt holes and require non-standard bolts available on request. 1.00 dia.406 I...437.500.735 dia ushing daptive Sealing Gaskets In the event that two smooth faced or grooved flanges come together in your system an adaptive gasket can save the day. &N can provide either a thin smooth sealing face gasket or a thin gasket with O-Rings on both sides. oth gaskets are thin enough to allow the use of standard bolts to compress the assembly. These problems are not common and therefore &N does not stock these components. Please call for price and delivery. ixed Rotatable ixed Rotatable Viton O-ring Viton O-ring ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.5

Section 7 S Hardware &N orporation High Vacuum omponents Since 1965 S/NSI Hardware This elastomer sealed flange systems uses bolt kits to fasten together your flanges and Viton elastomer O-Rings to create a seal. In addition to the standard fasteners and seals, adaptive hardware is available to meet the needs of your specific application. S/NSI asteners These bolt kits fasten two flanges together that both have clearance bolt holes. The bolts slide easily through smooth bored bolt holes and are fastened with a nut and washer on the far side of the flange assembly. These bolt kits are offered in Hex-head bolt, nut and washer kits. *1 S/NSI Seals Viton seals are a vacuum grade fluorocarbon elastomer O-Rings that are compressed between the two S/NSI flanges to create a seal capable of achieving high vacuum pressure. Viton seals have a temperature range of 20 up to 150 (200 intermittent use) and may be re-used many times for re-installation of S/NSI sealing assemblies. *2 or More Info... *1 See pg. 7.7 for sizes and details. *2 See pg. 7.7 for sizes and details. *3 See pg. 7.5 for dimension sizes and details; pg. 7.7 for prices. S/NSI daptive asteners The adaptive bolt hole bushing reduces a 3/4 bolt hole down to a 3/8 bolt hole. This is commonly used to connect an S/NSI flange (sizes 200, 300 or 400) to a gate valve with a matching flange. The S/NSI flange on the gate valve will have tapped bolt holes and require non-standard bolts available on request. *3 *4 See pg. 7.5 for details S/NSI daptive Seals &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.6 In the event that two smooth faced or grooved flanges come together in your system an adaptive gasket can save the day. &N can provide either a thin smooth sealing face gasket or a thin gasket with O-Rings on both sides. oth gaskets are thin enough to allow the use of standard bolts to compress the assembly. These problems are not common and therefore &N does not stock these components. *4 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S Hardware Section 7 High Vacuum omponents Since 1965 &N orporation olt Kits asteners Materials: Hex-head olt: Stainless Steel Hardware (nut and washer): Stainless Steel Product Notes or use with learance olt Hole S/NSI langes PRT RRN olt UNIT NUMR NUMR Quantity Size PRI 0606500 100S-K 4 9/16-12 x 1.5 $ 15.00 0606501 150S-K 4 9/16-12 x 1.5 $ 15.00 0606502 200S-K 4 5/8-11 x 1.5 $ 18.50 0606503 300S-K 4 5/8-11 x 1.5 $ 18.50 0606504 400S-K 8 5/8-11 x 1.5 $ 37.00 0606505 600S-K 8 3/4-10 x 2.25 $ 46.00 0606506 800S-K 8 3/4-10 x 2.25 $ 46.00 0606507 1000S-K 12 3/4-10 x 2.25 $ 69.00 daptive olt Hole ushing PRT RRN UNIT NUMR NUMR description PRI 0606509 H-075x038 4 ushings per kit $ 27.00 The &N daptive olt Hole ushing reduces any 3/4" bolt hole to 3/8" in diameter. ommonly used to join most standard Gate Valves with S 200, S 300, S 400 flanges. Viton O-Ring or S langes Materials: luorocarbon elastomer Product Notes Multi-use seal Temperature Range: -70 up to 150 (intermittent use to 200 ) Pressure Range: HV (approx.1x10-8 Torr) PRT RRN ST UNIT NUMR NUMR Number PRI 0600225 100S-OV 2-225 0.120 1.875 $ 3.50 0600230 150S-OV 2-230 0.120 2.500 $ 4.50 0600238 200S-OV 2-238 0.120 3.500 $ 7.00 0600247 300S-OV 2-247 0.120 4.625 $ 8.00 0600258 400S-OV 2-258 0.120 6.000 $ 10.00 0600266 600S-OV 2-266 0.120 8.000 $ 12.50 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. 0600274 800S-OV 2-274 0.120 10.000 $ 15.50 (352) 528-4100 1(800) LNG1 www.ancorp.com 0600278 1000S-OV 2-278 0.120 12.000 $ 18.00 7.7

Section 7 S langes &N orporation High Vacuum omponents Since 1965 S/NSI langes &N orporation manufactures flanges for our own use as we manufacture modular fittings (tee s, elbows and nipples) valves, feedthroughs, chambers and other components. We offer these same flanges for those customers that have in-house welding capabilities Part and desire Number to customize Reference their system Number or components LNG 1 & 2 TU O.. LNG 3 TU O.. $98,145.45 4500423 L63XQ40-T L63 2.50 Q40 1.5 3.25 2.9 $180.00 themselves. 4500424 L63XQ50-T L63 2.50 Q50 2 3.25 3.4 $205.00 4500425 L80XQ40-T L80 3.00 Q40 1.5 3.5 3.15 $220.00 ll &N orporation S/NSI 4500426 L80XQ50-T L80 3.00 Q50 2 3.5 3.65 $235.00 4500427 flanges are L100XQ40-T manufactured to industry L100 specifications 4.00 Q40 to 1.5 4.13 3.65 $235.00 4500428 ensure compatibility L100XQ50-T with other L100 manufacturer s 4.00 flanges. Q50 2 4.13 4.15 $250.00 Specifications Vacuum Rated to 1X10-8 Torr. Leak Rating < 1x10-9 std. cc/s helium Temperature Range: -20 to 200 Standard Sizes: 5" to 16" O.. (for tubing diameter 1" up to 12") Materials: langes and ittings: 304 Stainless Steel eatures Reusable langes Rotatable flanges for easier bolt hole alignment dapters to other flange systems available Interchangeable with other S/NSI style flanges made to industry standards lastomer Seals: Viton or More Info... *5 See pg. 7.10-7.24 for sizes and additional details &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com S/NSI ixed Weld langes These flanges are manufactured with a weld prep and tubing bore for immediate installation on your system with no additional alteration. ixed flanges have a set bolt hole orientation. oth fixed and rotatable flanges are available with an o-ring groove. ll S/NSI sealing assemblies must include 1 smooth face S/NSI flange and 1 grooved face flange. ixed and rotatable flanges have clearance bolt holes. learance bolt holes allow for unrestricted passage of a bolt through the flanges. The bolt is then tightened with a nut on the back side of the flange assembly. Standard S/NSI weld flanges are manufactured of 304 stainless steel. Other materials are available on request. *5 7.8 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S langes Section 7 High Vacuum omponents Since 1965 &N orporation S/NSI Rotatable Weld langes These flanges are manufactured with a weld prep and tubing bore for immediate installation on your system with no additional alteration. Rotatable flanges have a two piece design allowing for bolt hole rotation to ease bolt alignment when mating the two flanges. oth fixed and rotatable flanges are available with an o-ring groove. ll S/NSI sealing assemblies must include 1 smooth face S/NSI flange and 1 grooved face flange. ixed and rotatable flanges have clearance bolt holes. learance bolt holes allow for unrestricted passage of a bolt through the flanges. The bolt is then tightened with a nut on the back side of the flange assembly. Standard S/NSI weld flanges are manufactured of 304 stainless steel. Other materials are available on request. *6 S/NSI ixed lank langes These flanges are manufactured with no weld prep and no tubing bore. lank flanges are commonly used to close unused ports or they are altered by customers with their own custom machining capability for a special use. ixed flanges have a set bolt hole orientation. oth fixed and rotatable flanges are available with an o-ring groove. ll S/NSI sealing assemblies must include 1 smooth face S/NSI flange and 1 grooved face flange. ixed and rotatable flanges have clearance bolt holes. learance bolt holes allow for unrestricted passage of a bolt through the flanges. The bolt is then tightened with a nut on the back side of the flange assembly. Standard S/NSI weld flanges are manufactured of 304 stainless steel. Other materials are available on request. *7 S/NSI Rotatable lank langes These flanges are manufactured with no weld prep and no tubing bore. lank flanges are commonly used to close unused ports or they are altered by customers with their own custom machining capability for a special use. Rotatable flanges have a two piece design allowing for bolt hole rotation to ease bolt alignment when mating the two flanges. oth fixed and rotatable flanges are available with an o-ring groove. ll S/NSI sealing assemblies must include 1 smooth face S/NSI flange and 1 grooved face flange. ixed and rotatable flanges have clearance bolt holes. learance bolt holes allow for unrestricted passage of a bolt through the flanges. The bolt is then tightened with a nut on the back side of the flange assembly. Standard S/NSI weld flanges are manufactured of 304 stainless steel. Other materials are available on request. *8 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com or More Info... *6 See pg. 7.11-7.25 for sizes and additional details *7 See pg. 7.10-7.24 for sizes and additional details *8 See pg. 7.11-7.25 for sizes and additional details 7.9

Section 7 S/NSI langes &N orporation High Vacuum omponents Since 1965 100 S - 4.25 O.. Product eatures: esigned to fit standard inch tubing O.. s Self-ligning Internal Weld Rotatable flanges for easier bolt hole alignment lank flanges to close unused ports or custom modify Interchangeable with other S/ NSI style flanges Product Specifications Pressure Range: HV (approx. 1x10-8 Torr) Temperature Range: -20 up to 200 Standard Materials: 304 grade Stainless Steel Options: all for price and availability lternative Materials 316 stainless steel, aluminum, etc. dapters to other flange systems available see section 9 100 S - ixed langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O Thickness ore Thru Hole Setback olt ircle No. Size PRI &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.10 6000000 100S-000 4.25.500 LNK - - 3.125 4.625 $ 64.00 6000001 100S-100 4.25.500 1.010.875.250 3.125 4.625 $ 69.00 6000002 100S-150 4.25.500 1.510 1.375.250 3.125 4.625 $ 69.00 100 S - ixed, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000028 100S-000-G 4.25.500 LNK - - 3.125 4.625 $ 87.00 6000029 100S-100-G 4.25.500 1.010.875.250 3.125 4.625 $ 92.00 6000030 100S-150-G 4.25.500 1.510 1.375.250 3.125 4.625 $ 92.00 OR WITH O-RING GROOV ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 100 S - Rotatable langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000056 100S-000-R 4.25.500 LNK - - 3.125 4.625 $ 110.00 6000057 100S-100-R 4.25.500 1.010.875.250 3.125 4.625 $ 125.00 6000058 100S-150-R 4.25.500 1.510 1.375.250 3.125 4.625 $ 125.00 100 S - Rotatable, Grooved langes LNK WITH O-RING GROOV OR WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000084 100S-000-R-G 4.25.500 LNK - - 3.125 4.625 $ 135.00 6000085 100S-100-R-G 4.25.500 1.010.875.250 3.125 4.625 $ 145.00 6000086 100S-150-R-G 4.25.500 1.510 1.375.250 3.125 4.625 $ 145.00 100 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600225 100S-OV 100S (1) Viton O-Ring $ 3.50 0606500 100S-K 100S (4) olt, Nut & Washer $ 15.00 Kit, 9/16 12 x 1.5 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.11

Section 7 S/NSI langes &N orporation High Vacuum omponents Since 1965 150 S - 5.00" O.. Product eatures: esigned to fit standard inch tubing O.. s Self-ligning Internal Weld Rotatable flanges for easier bolt hole alignment lank flanges to close unused ports or custom modify Interchangeable with other S/ NSI style flanges 150 S - ixed langes dapters to other flange systems available see section 9 Product Specifications Pressure Range: HV (approx. 1x10-8 Torr) Temperature Range: -20 up to 200 Standard Materials: 304 grade Stainless Steel Options: all for price and availability lternative Materials 316 stainless steel, aluminum, etc. LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.12 6000003 150S-000 5.00 0.500 LNK - - 3.880 4 0.625 $ 87.00 6000004 150S-150 5.00 0.500 1.510 1.375 0.250 3.880 4 0.625 $ 98.00 6000005 150S-200 5.00 0.500 2.010 1.875 0.250 3.880 4 0.625 $ 98.00 6000006 150S-250 5.00 0.500 2.510 2.375 0.250 3.880 4 0.625 $ 98.00 150 S - ixed, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000031 150S-000-G 5.00 0.500 LNK - - 3.880 4 0.625 $ 110.00 6000032 150S-150-G 5.00 0.500 1.510 1.375 0.250 3.880 4 0.625 $ 125.00 6000033 150S-200-G 5.00 0.500 2.010 1.875 0.250 3.880 4 0.625 $ 125.00 6000034 150S-250-G 5.00 0.500 2.510 2.375 0.250 3.880 4 0.625 $ 125.00 OR WITH O-RING GROOV ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 150 S - Rotatable langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000059 150S-000-R 5.00 0.500 LNK - - 3.880 4 0.625 $ 140.00 6000060 150S-150-R 5.00 0.500 1.510 1.375 0.250 3.880 4 0.625 $ 150.00 6000061 150S-200-R 5.00 0.500 2.010 1.875 0.250 3.880 4 0.625 $ 150.00 6000062 150S-250-R 5.00 0.500 2.510 2.375 0.250 3.880 4 0.625 $ 150.00 150 S - Rotatable, Grooved langes LNK WITH O-RING GROOV OR WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000087 150S-000-R-G 5.00 0.500 LNK - - 3.880 4 0.625 $ 165.00 6000088 150S-150-R-G 5.00 0.500 1.510 1.375 0.250 3.880 4 0.625 $ 175.00 6000089 150S-200-R-G 5.00 0.500 2.010 1.875 0.250 3.880 4 0.625 $ 175.00 6000090 150S-250-R-G 5.00 0.500 2.510 2.375 0.250 3.880 4 0.625 $ 175.00 150 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600230 150S-OV 150S (1) Viton O-Ring $ 4.50 0606501 150S-K 150S (4) olt, Nut & Washer $ 15.00 Kit, 9/16 12 x 1.5 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.13

Section 7 S/NSI langes &N orporation High Vacuum omponents Since 1965 200 S - 6.00" O.. Product eatures: esigned to fit standard inch tubing O.. s Self-ligning Internal Weld Rotatable flanges for easier bolt hole alignment lank flanges to close unused ports or custom modify Interchangeable with other S/ NSI style flanges 200 S - ixed langes dapters to other flange systems available see section 9 Product Specifications Pressure Range: HV (approx. 1x10-8 Torr) Temperature Range: -20 up to 200 Standard Materials: 304 grade Stainless Steel Options: all for price and availability lternative Materials 316 stainless steel, aluminum, etc. LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.14 6000007 200S-000 6.00 0.500 LNK - - 4.750 4 0.750 $ 105.00 6000008 200S-200 6.00 0.500 2.010 1.875 0.250 4.750 4 0.750 $ 115.00 6000009 200S-250 6.00 0.500 2.510 2.375 0.250 4.750 4 0.750 $ 115.00 6000010 200S-300 6.00 0.500 3.010 2.938 0.250 4.750 4 0.750 $ 115.00 6000011 200S-350 6.00 0.500 3.510 3.438 0.250 4.750 4 0.750 $ 115.00 200 S - ixed, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000035 200S-000-G 6.00 0.500 LNK - - 4.750 4 0.750 $ 130.00 6000036 200S-200-G 6.00 0.500 2.010 1.875 0.250 4.750 4 0.750 $ 140.00 6000037 200S-250-G 6.00 0.500 2.510 2.375 0.250 4.750 4 0.750 $ 140.00 6000038 200S-300-G ll Registered 6.00 Trademarks 0.500 3.010 are the 2.938 property of 0.250 their respective 4.750 companies, 4 see 0.750 Intro. $ 140.00 pg. 7. 6000039 200S-350-G (352) 528-4100 6.00 0.500 1(800) 3.510 LNG1 3.438 www.ancorp.com 0.250 4.750 4 0.750 $ 140.00 OR WITH O-RING GROOV

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 200 S - Rotatable langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000063 200S-000-R 6.00 0.500 LNK - - 4.750 4 0.750 $ 190.00 6000064 200S-200-R 6.00 0.500 2.010 1.875 0.250 4.750 4 0.750 $ 200.00 6000065 200S-250-R 6.00 0.500 2.510 2.375 0.250 4.750 4 0.750 $ 200.00 6000066 200S-300-R 6.00 0.500 3.010 2.938 0.250 4.750 4 0.750 $ 200.00 6000067 200S-350-R 6.00 0.500 3.510 3.438 0.250 4.750 4 0.750 $ 200.00 200 S - Rotatable, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI OR WITH O-RING GROOV tech tip The &N daptive olt Hole ushing reduces any 3/4" bolt hole to 3/8" in diameter. ommonly used to join most standard Gate Valves with S 200, S 300, S 400 flanges. 6000091 200S-000-R-G 6.00 0.500 LNK - - 4.750 4 0.750 $ 215.00 6000092 200S-200-R-G 6.00 0.500 2.010 1.875 0.250 4.750 4 0.750 $ 220.00 6000093 200S-250-R-G 6.00 0.500 2.510 2.375 0.250 4.750 4 0.750 $ 220.00 6000094 200S-300-R-G 6.00 0.500 3.010 2.938 0.250 4.750 4 0.750 $ 220.00 6000095 200S-350-R-G 6.00 0.500 3.510 3.438 0.250 4.750 4 0.750 $ 220.00 200 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600238 200S-OV 200S (1) Viton O-Ring $ 7.00 0606502 200S-K 200S (4) olt, Nut & Washer $ 18.50 Kit, 5/8 11 x 1.5 0606509 H-075X038 200S 3/4 TO 3/8 olt $ 27.00 300S Hole daptive ushing 400S ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.15

Section 7 S/NSI langes &N orporation High Vacuum omponents Since 1965 300 S - 7.50" O.. Product eatures: esigned to fit standard inch tubing O.. s Self-ligning Internal Weld Rotatable flanges for easier bolt hole alignment lank flanges to close unused ports or custom modify Interchangeable with other S/ NSI style flanges 300 S - ixed langes dapters to other flange systems available see section 9 Product Specifications Pressure Range: HV (approx. 1x10-8 Torr) Temperature Range: -20 up to 200 Standard Materials: 304 grade Stainless Steel Options: all for price and availability lternative Materials 316 stainless steel, aluminum, etc. LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.16 6000012 300S-000 7.50 0.500 LNK - - 6.000 4 0.750 $ 130.00 6000013 300S-300 7.50 0.500 3.010 2.938 0.250 6.000 4 0.750 $ 145.00 6000014 300S-350 7.50 0.500 3.510 3.438 0.250 6.000 4 0.750 $ 145.00 6000015 300S-400 7.50 0.500 4.010 3.910 0.250 6.000 4 0.750 $ 145.00 300 S - ixed, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000040 300S-000-G 7.50 0.500 LNK - - 6.000 4 0.750 $ 170.00 6000041 300S-300-G 7.50 0.500 3.010 2.938 0.250 6.000 4 0.750 $ 185.00 6000042 300S-350-G 7.50 0.500 3.510 3.438 0.250 6.000 4 0.750 $ 185.00 6000043 300S-400-G 7.50 0.500 4.010 3.910 0.250 6.000 4 0.750 $ 185.00 OR WITH O-RING GROOV ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 300 S - Rotatable langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000068 300S-000-R 7.50 0.500 LNK - - 6.000 4 0.750 $ 220.00 6000069 300S-300-R 7.50 0.500 3.010 2.938 0.250 6.000 4 0.750 $ 240.00 6000070 300S-350-R 7.50 0.500 3.510 3.438 0.250 6.000 4 0.750 $ 240.00 6000071 300S-400-R 7.50 0.500 4.010 3.910 0.250 6.000 4 0.750 $ 240.00 300 S - Rotatable, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI OR WITH O-RING GROOV tech tip The &N daptive olt Hole ushing reduces any 3/4" bolt hole to 3/8" in diameter. ommonly used to join most standard Gate Valves with S 200, S 300, S 400 flanges. 6000096 300S-000-R-G 7.50 0.500 LNK - - 6.000 4 0.750 $ 260.00 6000097 300S-300-R-G 7.50 0.500 3.010 2.938 0.250 6.000 4 0.750 $ 280.00 6000098 300S-350-R-G 7.50 0.500 3.510 3.438 0.250 6.000 4 0.750 $ 280.00 6000099 300S-400-R-G 7.50 0.500 4.010 3.910 0.250 6.000 4 0.750 $ 280.00 300 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600247 300S-OV 300S (1) Viton O-Ring $ 8.00 0606503 300S-K 300S (4) olt, Nut & Washer $ 18.50 Kit, 5/8 11 x 1.5 0606509 H-075X038 200S 3/4 TO 3/8 olt $ 27.00 300S Hole daptive ushing 400S ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.17

Section 7 S/NSI langes &N orporation High Vacuum omponents Since 1965 400 S - 9.00" O.. Product eatures: esigned to fit standard inch tubing O.. s Self-ligning Internal Weld Rotatable flanges for easier bolt hole alignment lank flanges to close unused ports or custom modify Interchangeable with other S/ NSI style flanges 400 S - ixed langes dapters to other flange systems available see section 9 Product Specifications Pressure Range: HV (approx. 1x10-8 Torr) Temperature Range: -20 up to 200 Standard Materials: 304 grade Stainless Steel Options: all for price and availability lternative Materials 316 stainless steel, aluminum, etc. LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000016 400S-000 9.00 0.500 LNK - - 7.500 8 0.750 $ 160.00 6000017 400S-400 9.00 0.500 4.010 3.910 0.250 7.500 8 0.750 $ 170.00 6000018 400S-600 9.00 0.500 6.020 5.875 0.250 7.500 8 0.750 $ 170.00 &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.18 400 S - ixed, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000044 400S-000-G 9.00 0.500 LNK - - 7.500 8 0.750 $ 200.00 6000045 400S-400-G 9.00 0.500 4.010 3.910 0.250 7.500 8 0.750 $ 200.00 6000046 400S-600-G 9.00 0.500 6.020 5.875 0.250 7.500 8 0.750 $ 210.00 OR WITH O-RING GROOV ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 400 S - Rotatable langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000072 400S-000-R 9.00 0.500 LNK - - 7.500 8 0.750 $ 250.00 6000073 400S-400-R 9.00 0.500 4.010 3.910 0.250 7.500 8 0.750 $ 260.00 6000074 400S-600-R 9.00 0.500 6.020 5.875 0.250 7.500 8 0.750 $ 260.00 400 S - Rotatable, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000100 400S-000-R-G 9.00 0.500 LNK - - 7.500 8 0.750 $ 290.00 6000101 400S-400-R-G 9.00 0.500 4.010 3.910 0.250 7.500 8 0.750 $ 300.00 6000102 400S-600-R-G 9.00 0.500 6.020 5.875 0.250 7.500 8 0.750 $ 300.00 OR WITH O-RING GROOV tech tip The &N daptive olt Hole ushing reduces any 3/4" bolt hole to 3/8" in diameter. ommonly used to join most standard Gate Valves with S 200, S 300, S 400 flanges. 400 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600258 400S-OV 400S (1) Viton O-Ring $ 10.00 0606504 400S-K 400S (4) olt, Nut & Washer $ 37.00 Kit, 5/8 11 x 1.5 0606509 H-075X038 200S 3/4 TO 3/8 olt $ 27.00 300S Hole daptive ushing 400S ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.19

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 600 S - Rotatable langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000075 600S-000-R 11.00 0.750 LNK - - 9.500 8 0.812 $ 390.00 6000076 600S-600-R 11.00 0.750 6.020 5.875 0.375 9.500 8 0.812 $ 420.00 6000077 600S-800-R 11.00 0.750 8.020 7.875 0.375 9.500 8 0.812 $ 420.00 600 S - Rotatable, Grooved langes LNK WITH O-RING GROOV OR WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000103 600S-000-R-G 11.00 0.750 LNK - - 9.500 8 0.812 $ 445.00 6000104 600S-600-R-G 11.00 0.750 6.020 5.875 0.375 9.500 8 0.812 $ 470.00 6000105 600S-800-R-G 11.00 0.750 8.020 7.875 0.375 9.500 8 0.812 $ 470.00 600 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600266 600S-OV 600S (1) Viton O-Ring $ 12.50 0606505 600S-K 600S (4) olt, Nut & Washer $ 46.00 Kit, 3/4 10 x 2.25 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.21

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 800 S - Rotatable langes LNK OR PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000078 800S-000-R 13.50 0.750 LNK - - 11.750 8 0.812 $ 475.00 6000079 800S-800-R 13.50 0.750 8.020 7.875 0.375 11.750 8 0.812 $ 510.00 6000080 800S-1000-R 13.50 0.750 10.020 9.875 0.375 11.750 8 0.812 $ 510.00 800 S - Rotatable, Grooved langes LNK WITH O-RING GROOV OR WITH O-RING GROOV PRT RRN olt Hole UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Size PRI 6000106 800S-000-R-G 13.50 0.750 LNK - - 11.750 8 0.812 $ 535.00 6000107 800S-800-R-G 13.50 0.750 8.020 7.875 0.375 11.750 8 0.812 $ 570.00 6000108 800S-1000-R-G 13.50 0.750 10.020 9.875 0.375 11.750 8 0.812 $ 570.00 800 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600274 800S-OV 800S (1) Viton O-Ring $ 15.50 0606506 800S-K 800S (4) olt, Nut & Washer $ 46.00 Kit, 3/4 10 x 2.25 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.23

Section 7 S/NSI langes &N orporation High Vacuum omponents Since 1965 1000 S - 16.00" O.. Product eatures: esigned to fit standard inch tubing O.. s Self-ligning Internal Weld Rotatable flanges for easier bolt hole alignment lank flanges to close unused ports or custom modify Interchangeable with other S/ NSI style flanges 1000 S - ixed langes dapters to other flange systems available see section 9 Product Specifications Pressure Range: HV (approx. 1x10-8 Torr) Temperature Range: -20 up to 200 Standard Materials: 304 grade Stainless Steel Options: all for price and availability lternative Materials 316 stainless steel, aluminum, etc. LNK OR PRT RRN olt Hol UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Siz PRI 6000025 1000S-000 16.00 0.750 LNK - - 14.250 12 0.812 $ all or Quote 6000026 1000S-1000 16.00 0.750 10.020 9.875 0.375 14.250 12 0.812 $ all or Quote 6000027 1000S-1200 16.00 0.750 12.020 11.875 0.375 14.250 12 0.812 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.24 1000 S - ixed, Grooved langes LNK WITH O-RING GROOV PRT RRN olt Hol UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Siz PRI 6000053 1000S-000-G 16.00 0.750 LNK - - 14.250 12 0.812 $ all or Quote 6000054 1000S-1000-G 16.00 0.750 10.020 9.875 0.375 14.250 12 0.812 $ all or Quote 6000055 1000S-1200-G 16.00 0.750 12.020 11.875 0.375 14.250 12 0.812 $ all or Quote OR WITH O-RING GROOV ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S/NSI langes Section 7 High Vacuum omponents Since 1965 &N orporation 1000 S - Rotatable langes LNK OR PRT RRN olt Hol UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Siz PRI 6000081 1000S-000-R 16.00 0.750 LNK - - 14.250 12 0.812 $ all or Quote 6000082 1000S-1000-R 16.00 0.750 10.020 9.875 0.375 14.250 12 0.812 $ all or Quote 6000083 1000S-1200-R 16.00 0.750 12.020 11.875 0.375 14.250 12 0.812 $ all or Quote 1000 S - Rotatable, Grooved langes LNK WITH O-RING GROOV OR WITH O-RING GROOV PRT RRN olt Hol UNIT NUMR NUMR O.. Thickness ore Thru Hole Setback olt ircle No. Siz PRI 6000109 1000S-000-R-G 16.00 0.750 LNK - - 14.250 12 0.812 $ all or Quote 6000110 1000S-1000-R-G 16.00 0.750 10.020 9.875 0.375 14.250 12 0.812 $ all or Quote 6000111 1000S-1200-R-G 16.00 0.750 12.020 11.875 0.375 14.250 12 0.812 $ all or Quote 1000 S Hardware PRT RRN US UNIT NUMR NUMR with lange escription PRI 0600278 1000S-OV 1000S (1) Viton O-Ring $ 18.00 0606507 1000S-K 1000S (4) olt, Nut & Washer $ 69.00 Kit, 3/4 10 x 2.25 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.25

Section 7 NSI/S ittings Introduction &N orporation High Vacuum omponents Since 1965 S/NSI ittings &N orporation s S/NSI fittings make up a complete set of modular components that allow our customers to create a custom vacuum system without the trouble and expense of having in-house machining and welding capabilities. ll &N orporation S/NSI fittings are made with flanges manufactured to industry specifications to ensure compatibility with other manufacturer s flanges. Specifications Vacuum Rated to 1X10-8 Torr. Leak Rating < 1x10-9 std. cc/s helium Temperature Range: -20 to 200 Standard Sizes: 5" to 16" O.. (for tubing diameter 1" up to 12") Materials: langes and ittings: 304 Stainless Steel eatures Reusable langes Rotatable flanges for easier bolt hole alignment dapters to other flange systems available Interchangeable with other S/NSI style flanges made to industry standards lastomer Seals: Viton Half Nipples or More Info... *9 See pg. 7.28-7.29 for sizes and additional details *10 See pg. 7.30-7.35 for sizes and additional details These fittings are manufactured with a flange on one end and raw tubing on the other. Half nipples are often welded onto a custom vacuum system or instrument by a customer with in-house welding capabilities. However, these fittings can also be used with Quick onnect compression fittings to make a vacuum tight connection without welding. (see Section 9 for our selection of quick disconnect compression fittings) &N manufactures standard Half Nipples in 304 Stainless Steel, other materials are available on request. *9 Nipples &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com These fittings are manufactured with a flange on each end of a straight section of tubing. Nipples are used to create a weld free straight connection within a vacuum system. Nipples are also used as straight adapters between different tubing sizes or flange types. These fittings are available in all S/NSI sizes and flange types. &N manufactures standard Nipples in 304 Stainless Steel, other materials are available on request. *10 7.26 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

NSI/S ittings Introduction Section 7 High Vacuum omponents Since 1965 &N orporation lbows These fittings are manufactured with a flange on each end of a curved section of tubing. lbows accommodate turns or alignment considerations for vacuum system design. lbows are offered in 3 designs; 45 radius elbow, 90 radius elbow and 90 mitered elbow to accommodate a wide variety of system configurations. &N manufactures standard lbows in 304 Stainless Steel, other materials are available on request. *11 Tees These fittings are manufactured with a flange on each end of a T shaped section of tubing. Tees accommodate junctions or alignment considerations for vacuum system design. Tees are also used as junction adapters between different tubing sizes or flange types. &N manufactures standard Tees in 304 Stainless Steel, other materials are available on request. *12 rosses These fittings are manufactured with a flange on each end of an X shaped section of tubing. rosses accommodate junctions or alignment considerations for vacuum system design. rosses are also used as junction adapters between different tubing sizes or flange types. &N manufactures standard rosses in 304 Stainless Steel, other materials are available on request. *13 5-way and 6-way rosses and ubes These fittings are manufactured with a flange on each end of a 5 or 6 sided tubing junction. These rosses accommodate complex junctions or alignment considerations for vacuum system design. Larger sizes are sometimes used as the starting point of a simple vacuum chamber design. &N manufactures standard 5 and 6-way crosses and cubes in 304 Stainless Steel, other materials are available on request. *14 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com *Ordering Note There are two terms used within this catalog that require specific definition. Reducer ittings are used to reduce the size of flanges and tubing used within the same flange family. or example, 600 to 275 or ISO-L63 to ISO-Q40. These products are listed with the fittings components for that flange family. dapter ittings are used to change from one family of flanges to another. or example, ISO-Q25 to 275. or these products see Section 9: Hybrid dapters or More Info... *11 See pg. 7.36-7.41 for sizes and additional details *12 See pg. 7.42-7.43 for sizes and additional details *13 See pg. 7.44-7.45 for sizes and additional details *14 See pg. 7.46-7.49 for sizes and additional details 7.27

Section 7 S - Half Nipples &N orporation High Vacuum omponents Since 1965 Half Nipples - ixed lange Materials: 304 Stainless Steel Product Notes learance bolt Holes utt weld esigned to fit standard inch tubing O.. s Highly ustomizable - O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths lternative Materials - 316 stainless steel, luminum, etc. PRT RRN lange Tube Tube Wall UNIT NUMR NUMR o.. O.. Thickness PRI *Ordering Note This listing is for ixed S/ NSI lange Half Nipples. or Rotatable Half Nipples see pg. 7.29 6000148 100S-100-L 4.25 1.00 0.065 3.25 $ 110.00 6000149 100S-150-L 4.25 1.50 0.065 3.25 $ 110.00 6000150 150S-150-L 5.00 1.50 0.065 3.25 $ 135.00 6000151 150S-200-L 5.00 2.00 0.065 3.25 $ 135.00 6000152 150S-250-L 5.00 2.50 0.065 3.25 $ 135.00 6000153 200S-200-L 6.00 2.00 0.065 3.50 $ 150.00 6000154 200S-250-L 6.00 2.50 0.065 3.50 $ 150.00 6000155 200S-300-L 6.00 3.00 0.065 3.50 $ 150.00 6000156 300S-300-L 7.50 3.00 0.065 4.13 $ 190.00 6000157 300S-400-L 7.50 4.00 0.083 4.13 $ 190.00 6000158 400S-400-L 9.00 4.00 0.083 4.13 $ 205.00 6000159 400S-600-L 9.00 6.00 0.083 5.25 $ 220.00 6000160 600S-600-L 11.00 6.00 0.083 5.38 $ 315.00 6000161 600S-800-L 11.00 8.00 0.120 7.38 $ 345.00 6000162 800S-800-L 13.50 8.00 0.120 7.75 $ 400.00 6000163 800S-1000-L 13.50 10.00 0.120 9.88 $ 435.00 6000164 1000S-1000-L 16.00 10.00 0.120 9.88 $ all or Quote 6000165 1000S-1200-L 16.00 12.00 0.120 9.88 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Please Note: dding a groove is customizing this product and is no longer returnable. or this option add a "-G" to the refernce number. 7.28 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S - Half Nipples Section 7 High Vacuum omponents Since 1965 &N orporation Half Nipple - Rotatable lange Materials: 304 Stainless Steel Product Notes utt weld esigned to fit standard inch tubing O.. s Options: all for price and delivery ustom Lengths lternative Materials - 316 stainless steel, luminum, etc. Highly ustomizable - O-ring groove available (see chart below) PRT RRN lange Tube Tube Wall UNIT NUMR NUMR o.. O.. Thickness PRI 6000184 100S-100-L-R 4.25 1.00 0.065 3.25 $ 165.00 6000185 100S-150-L-R 4.25 1.50 0.065 3.25 $ 165.00 6000186 150S-150-L-R 5.00 1.50 0.065 3.25 $ 185.00 6000187 150S-200-L-R 5.00 2.00 0.065 3.25 $ 185.00 6000188 150S-250-L-R 5.00 2.50 0.065 3.25 $ 185.00 6000189 200S-200-L-R 6.00 2.00 0.065 3.50 $ 240.00 6000190 200S-250-L-R 6.00 2.50 0.065 3.50 $ 240.00 6000191 200S-300-L-R 6.00 3.00 0.065 3.50 $ 240.00 6000192 300S-300-L-R 7.50 3.00 0.065 4.13 $ 285.00 6000193 300S-400-L-R 7.50 4.00 0.083 4.13 $ 285.00 6000194 400S-400-L-R 9.00 4.00 0.083 4.13 $ 295.00 6000195 400S-600-L-R 9.00 6.00 0.083 5.25 $ 315.00 6000196 600S-600-L-R 11.00 6.00 0.083 5.38 $ 445.00 6000197 600S-800-L-R 11.00 8.00 0.120 7.38 $ 480.00 6000198 800S-800-L-R 13.50 8.00 0.120 7.75 $ 530.00 6000199 800S-1000-L-R 13.50 10.00 0.120 9.88 $ 565.00 6000200 1000S-1000-L-R 16.00 10.00 0.120 9.88 $ all or Quote 6000201 1000S-1200-L-R 16.00 12.00 0.120 9.88 $ all or Quote *Ordering Note This listing is for Rotatable S/NSI lange Half Nipples. or ixed Half Nipples see pg. 7.28 O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Please Note: dding a groove is customizing this product and is no longer returnable. or this option add a "-G" to the refernce number. ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.29

Section 7 S - ull Nipples &N orporation High Vacuum omponents Since 1965 Nipple - ixed langes Materials 304 Stainless Steel Product Notes Same size flange on both ends oth flanges have a fixed bolt hole orientation Highly ustomizable - O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials - 316 stainless steel, luminum, etc. PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI *Ordering Note Reducer Nipple fittings are available on pg. 7.34-7.35 &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.30 6000220 100S-100-NS 4.25 1.00 6.50 $ 230.00 6000221 100S-150-NS 4.25 1.50 6.50 $ 230.00 6000222 100S-150-NL 4.25 1.50 8.00 $ 240.00 6000223 150S-150-NS 5.00 1.50 6.50 $ 245.00 6000224 150S-200-NS 5.00 2.00 6.50 $ 245.00 6000225 150S-250-NS 5.00 2.50 6.50 $ 245.00 6000226 150S-250-NL 5.00 2.50 8.00 $ 250.00 6000227 200S-200-NS 6.00 2.00 7.00 $ 280.00 6000228 200S-250-NS 6.00 2.50 7.00 $ 280.00 6000229 200S-300-NS 6.00 3.00 7.00 $ 280.00 6000230 200S-300-NL 6.00 3.00 8.50 $ 285.00 6000231 300S-300-NS 7.50 3.00 8.26 $ 345.00 6000232 300S-300-NL 7.50 3.00 9.75 $ 345.00 6000233 300S-400-NS 7.50 4.00 8.26 $ 345.00 6000234 300S-400-NL 7.50 4.00 10.24 $ 355.00 6000235 400S-400-NS 9.00 4.00 8.26 $ 360.00 6000236 400S-400-NL 9.00 4.00 10.24 $ 365.00 6000237 400S-600-NS 9.00 6.00 10.50 $ 375.00 6000238 400S-600-NL 9.00 6.00 12.62 $ 380.00 6000239 600S-600-NS 11.00 6.00 10.76 $ 625.00 6000240 600S-600-NL 11.00 6.00 12.88 $ 630.00 6000241 600S-800-NS 11.00 8.00 10.76 $ 670.00 6000242 600S-800-NL 11.00 8.00 14.76 $ 675.00 6000243 800S-800-NL 13.50 8.00 15.50 $ 740.00 6000244 800S-1000-NL 13.50 10.00 19.76 $ 775.00 6000245 1000S-1000-NL 16.00 10.00 19.76 $ all or Quote 6000246 1000S-1200-NL 16.00 12.00 19.76 $ all or Quote O-Ring Groove Option lange Size Per. lange dditional ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G1/2" Groove both langes 1000S $ 60.00 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S - ull Nipples Section 7 High Vacuum omponents Since 1965 &N orporation Nipple - Rotatable lange Materials 304 Stainless Steel Product Notes Same size flange on both ends learance bolt holes One ixed and one Rotatable flange per fitting Highly ustomizable - O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials - 316 stainless steel, luminum, etc. ROTTL 1 IX 2 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000301 100S-100-R-NS 4.25 1.00 6.00 $ 285.00 6000302 100S-150-R-NS 4.25 1.50 6.00 $ 285.00 6000303 100S-150-R-NL 4.25 1.50 7.50 $ 290.00 6000304 150S-150-R-NS 5.00 1.50 6.50 $ 295.00 6000305 150S-200-R-NS 5.00 2.00 6.50 $ 295.00 6000306 150S-250-R-NS 5.00 2.50 6.50 $ 295.00 6000307 150S-250-R-NL 5.00 2.50 8.00 $ 300.00 6000308 200S-200-R-NS 6.00 2.00 7.00 $ 365.00 6000309 200S-250-R-NS 6.00 2.50 7.00 $ 365.00 6000310 200S-300-R-NS 6.00 3.00 7.00 $ 365.00 6000311 200S-300-R-NL 6.00 3.00 8.50 $ 370.00 6000312 300S-300-R-NS 7.50 3.00 8.26 $ 440.00 6000313 300S-300-R-NL 7.50 3.00 9.75 $ 440.00 6000314 300S-400-R-NS 7.50 4.00 8.26 $ 440.00 6000315 300S-400-R-NL 7.50 4.00 10.24 $ 445.00 6000316 400S-400-R-NS 9.00 4.00 8.26 $ 450.00 6000317 400S-400-R-NL 9.00 4.00 10.24 $ 455.00 6000318 400S-600-R-NS 9.00 6.00 10.50 $ 470.00 6000319 400S-600-R-NL 9.00 6.00 12.62 $ 475.00 6000320 600S-600-R-NS 11.00 6.00 10.76 $ 755.00 6000321 600S-600-R-NL 11.00 6.00 12.88 $ 760.00 6000322 600S-800-R-NS 11.00 8.00 10.76 $ 800.00 6000323 600S-800-R-NL 11.00 8.00 14.76 $ 805.00 6000324 800S-800-R-NS 13.50 8.00 15.50 $ 870.00 6000325 800S-1000-R-NL 13.50 10.00 19.76 $ 905.00 6000326 1000S-1000-R-NL 16.00 10.00 19.76 $ all or Quote 6000327 1000S-1200-R-NL 16.00 12.00 19.76 $ all or Quote O-Ring Groove Option lange Size Per. lange dditional ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G2" Groove lange 2 "-G1/2" Groove both langes ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com *Ordering Note Reducer Nipple fittings are available on pg. 7.34-7.35 7.31

Section 7 S - lexible Nipple &N orporation High Vacuum omponents Since 1965 lexible Nipple - ixed anges Materials langes - 304 Stainless Steel lexible Hose - 321 Stainless Steel ormed ellows Product Notes orrects misaligned connections oth flanges have a fixed bolt hole orientation O-ring groove available (see chart below) Options: all for price and delivery Larger Sizes ustom Lengths ustom lange ombination lternative Materials (i.e. 316 stainless steel) ree Length PRT RRN lange Hose Wall UNIT NUMR NUMR Type I.. Thickness PRI *Ordering Note or additional standard length flexible hose fittings see Section 12: Roughing omponents 0800182 100S-100-100S 1.00 0.006 4.00 $ 300.00 0800183 100S-150-100S 1.50 0.006 4.00 $ 305.00 0800184 150S-200-150S 2.00 0.006 4.00 $ 320.00 0800186 150S-250-150S 2.50 0.008 6.00 $ 345.00 0800187 200S-300-200S 3.00 0.008 6.00 $ 385.00 0800188 300S-400-300S 4.00 0.010 6.00 $ 520.00 0800189 400S-400-400S 4.00 0.010 6.00 $ 540.00 0800190 400S-600-400S 6.00 0.012 8.00 $ 640.00 0800191 600S-600-600S 6.00 0.012 8.00 $ 820.00 &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G1/2" Groove both langes 7.32 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S - lexible Nipple Section 7 High Vacuum omponents Since 1965 &N orporation lexible Nipple - Rotatable lange Materials langes - 304 Stainless Steel lexible Hose - 321 Stainless Steel ormed ellows Product Notes orrects misaligned connections One ixed and one Rotatable flange per fitting O-ring groove available (see chart below) Options: all for price and delivery Larger Sizes ustom Lengths ustom lange ombination lternative Materials (i.e. 316 stainless steel) 1 Rotatable 2 IX ree Length PRT RRN lange Hose Wall UNIT NUMR NUMR Type I.. Thickness PRI 0800197 100S-100-R 100S 1.00 0.006 4.00 $ 370.00 0800198 100S-150-R 100S 1.50 0.006 4.00 $ 375.00 0800199 150S-200-R 150S 2.00 0.006 4.00 $ 415.00 0800200 150S-250-R 150S 2.50 0.008 6.00 $ 440.00 0800201 200S-300-R 200S 3.00 0.008 6.00 $ 545.00 0800202 300S-400-R 300S 4.00 0.010 6.00 $ 695.00 0800203 400S-400-R 400S 4.00 0.010 6.00 $ 715.00 0800204 400S-600-R 400S 6.00 0.012 8.00 $ 815.00 0800205 600S-600-R 600S 6.00 0.012 8.00 $ 1,070.00 *Ordering Note or additional standard length flexible hose fittings see Section 12: Roughing omponents O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G2" Groove lange 2 "-G1/2" Groove both langes ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.33

Section 7 S - Reducer Nipples &N orporation High Vacuum omponents Since 1965 Reducer Nipple - ixed langes 1 Materials 304 Stainless Steel Product Notes onnects different size S/NSI langes oth flanges have a fixed bolt hole orientation O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths onical Reducer itting ustom lange ombinations lternative Materials - 316 stainless steel, luminum, etc. 2 PRT RRN lange 1 lange 2 Tube UNIT NUMR NUMR o.. O.. O.. PRI 6000328 150Sx100S-N 5.00 4.25 1.50 5.00 $ 265.00 6000329 200Sx100S-N 6.00 4.25 1.50 5.00 $ 280.00 6000330 200Sx150S-N 6.00 5.00 2.00 5.00 $ 290.00 6000331 300Sx100S-N 7.50 4.25 1.50 5.00 $ 325.00 6000332 300Sx150S-N 7.50 5.00 2.00 5.00 $ 335.00 6000333 300Sx200S-N 7.50 6.00 3.00 5.00 $ 345.00 6000334 400Sx150S-N 9.00 5.00 2.00 5.00 $ 355.00 6000335 400Sx200S-N 9.00 6.00 3.00 5.00 $ 375.00 6000336 400Sx300S-N 9.00 7.50 4.00 5.00 $ 420.00 6000337 600Sx150S-N 11.00 5.00 2.00 5.00 $ 440.00 6000338 600Sx200S-N 11.00 6.00 3.00 5.00 $ 460.00 6000339 600Sx300S-N 11.00 7.50 4.00 5.00 $ 510.00 6000340 600Sx400S-N 11.00 9.00 6.00 5.00 $ 545.00 6000341 800Sx150S-N 13.50 5.00 2.00 5.00 $ 525.00 6000342 800Sx200S-N 13.50 6.00 3.00 5.00 $ 550.00 6000343 800Sx300S-N 13.50 7.50 4.00 5.00 $ 595.00 6000344 800Sx400S-N 13.50 9.00 6.00 5.00 $ 625.00 6000345 800Sx600S-N 13.50 11.00 8.00 5.00 $ 755.00 6000346 1000Sx150S-N 16.00 5.00 2.00 5.00 $ all or Quote 6000347 1000Sx200S-N 16.00 6.00 3.00 5.00 $ all or Quote 6000348 1000Sx300S-N 16.00 7.50 4.00 5.00 $ all or Quote 6000349 1000Sx400S-N 16.00 9.00 6.00 5.00 $ all or Quote 6000350 1000Sx600S-N 16.00 11.00 8.00 5.00 $ all or Quote 6000351 1000Sx800S-N 16.00 13.50 10.00 5.00 $ all or Quote O-Ring Groove Option lange Size dditional Per. lange ost &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.34 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G2" Groove lange 2 "-G1/2" Groove both langes ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S - Reducer Nipples Section 7 High Vacuum omponents Since 1965 &N orporation Reducer Nipple - Rotatable lange Materials 304 Stainless Steel Product Notes Options: all for price and delivery ustom Lengths onnects different size S/ onical Reducer itting NSI langes ustom lange One ixed and one ombinations Rotatable flange per fitting lternative Materials O-ring groove available - 316 stainless steel, (see chart below) luminum, etc. IX 1 ROTTL 2 PRT RRN lange 1 lange 2 Tube UNIT NUMR NUMR o.. O.. O.. PRI 6000352 150Sx100S-R-N 5.00 4.25 1.50 5.00 $ 320.00 6000353 200Sx100S-R-N 6.00 4.25 1.50 5.00 $ 330.00 6000354 200Sx150S-R-N 6.00 5.00 2.00 5.00 $ 340.00 6000355 300Sx100S-R-N 7.50 4.25 1.50 5.00 $ 375.00 6000356 300Sx150S-R-N 7.50 5.00 2.00 5.00 $ 390.00 6000357 300Sx200S-R-N 7.50 6.00 3.00 5.00 $ 435.00 6000358 400Sx150S-R-N 9.00 5.00 2.00 5.00 $ 410.00 6000359 400Sx200S-R-N 9.00 6.00 3.00 5.00 $ 460.00 6000360 400Sx300S-R-N 9.00 7.50 4.00 5.00 $ 515.00 6000361 600Sx150S-R-N 11.00 5.00 2.00 5.00 $ 490.00 6000362 600Sx200S-R-N 11.00 6.00 3.00 5.00 $ 550.00 6000363 600Sx300S-R-N 11.00 7.50 4.00 5.00 $ 600.00 6000364 600Sx400S-R-N 11.00 9.00 6.00 5.00 $ 635.00 6000365 800Sx150S-R-N 13.50 5.00 2.00 5.00 $ 575.00 6000366 800Sx200S-R-N 13.50 6.00 3.00 5.00 $ 635.00 6000367 800Sx300S-R-N 13.50 7.50 4.00 5.00 $ 685.00 6000368 800Sx400S-R-N 13.50 9.00 6.00 5.00 $ 715.00 6000369 800Sx600S-R-N 13.50 11.00 8.00 5.00 $ 890.00 6000370 1000Sx150S-R-N 16.00 5.00 2.00 5.00 $ all or Quote 6000371 1000Sx200S-R-N 16.00 6.00 3.00 5.00 $ all or Quote 6000372 1000Sx300S-R-N 16.00 7.50 4.00 5.00 $ all or Quote 6000373 1000Sx400S-R-N 16.00 9.00 6.00 5.00 $ all or Quote 6000374 1000Sx600S-R-N 16.00 11.00 8.00 5.00 $ all or Quote 6000375 1000Sx800S-R-N 16.00 13.50 10.00 5.00 $ all or Quote O-Ring Groove Option &N NSI/S flanged fittings come standard with a smooth flange face. The addition lange Size dditional Per. lange ost of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G2" Groove lange 2 "-G1/2" Groove both langes ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.35

Section 7 45 Radius lbows &N orporation High Vacuum omponents Since 1965 45 lbow - ixed langes Materials 304 Stainless Steel Product Notes Radius elbow design oth flanges have a fixed bolt hole orientation O-ring groove available (see chart below) Options: all for price and delivery Larger Sizes ustom Lengths ustom lange ombinations lternative Materials (i.e. 316 stainless steel) non-rotatable PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000487 100S-150-45 4.25 1.50 1.78 $ 255.00 6000488 150S-200-45 5.00 2.00 2.092 $ 285.00 6000489 200S-300-45 6.00 3.00 3.933 $ 325.00 6000490 300S-400-45 7.50 4.00 5.027 $ 405.00 6000491 400S-400-45 9.00 4.00 5.027 $ 430.00 &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G1/2" Groove both langes 7.36 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

45 Radius lbows Section 7 High Vacuum omponents Since 1965 &N orporation 45 lbow - Rotatable lange Materials 304 Stainless Steel Product Notes Radius elbow design One ixed and one Rotatable flange per fitting O-ring groove available (see chart below) Options: all for price and delivery Larger Sizes ustom Lengths ustom lange ombinations lternative Materials (i.e. 316 stainless steel) 2 IX ROTTL 1 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000493 100S-150-R-45 4.25 1.50 1.78 $ 305.00 6000494 150S-200-R-45 5.00 2.00 2.092 $ 335.00 6000495 200S-300-R-45 6.00 3.00 3.933 $ 405.00 6000496 300S-400-R-45 7.50 4.00 5.027 $ 495.00 6000497 400S-400-R-45 9.00 4.00 5.027 $ 520.00 O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G2" Groove lange 2 "-G1/2" Groove both langes ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.37

Section 7 NSI/S lbows &N orporation High Vacuum omponents Since 1965 90 lbow - ixed langes Materials 304 Stainless Steel Product Notes Radius elbow design oth flanges have a fixed bolt hole orientation O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials (i.e. 316 stainless steel) R PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000499 100S-150-90 4.25 1.50 2.66 $ 285.00 6000500 150S-200-90 5.00 2.00 3.25 $ 285.00 6000501 200S-300-90 6.00 3.00 4.75 $ 345.00 6000502 300S-400-90 7.50 4.00 6.25 $ 400.00 6000503 400S-400-90 9.00 4.00 6.25 $ 445.00 6000504 400S-600-90 9.00 6.00 9.25 $ 450.00 6000505 600S-600-90 11.00 6.00 9.38 $ 690.00 6000506 600S-800-90 11.00 8.00 12.38 $ 815.00 6000507 800S-800-90 13.50 8.00 12.38 $ 1,005.00 6000508 800S-1000-90 13.50 10.00 15.38 $ 1,220.00 6000509 1000S-1000-90 16.00 10.00 15.38 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G1/2" Groove both langes 7.38 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

NSI/S lbows Section 7 High Vacuum omponents Since 1965 &N orporation 90 lbow - Rotatable lange Materials 304 Stainless Steel Product Notes Radius elbow design One ixed and one Rotatable flange per fitting O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials (i.e. 316 stainless steel) 2 IX R rotatable 1 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000511 100S-150-R-90 4.25 1.50 2.66 $ 335.00 6000512 150S-200-R-90 5.00 2.00 3.25 $ 335.00 6000513 200S-300-R-90 6.00 3.00 4.75 $ 435.00 6000514 300S-400-R-90 7.50 4.00 6.25 $ 495.00 6000515 400S-400-R-90 9.00 4.00 6.25 $ 535.00 6000516 400S-600-R-90 9.00 6.00 9.25 $ 545.00 6000517 600S-600-R-90 11.00 6.00 9.38 $ 825.00 6000518 600S-800-R-90 11.00 8.00 12.38 $ 995.00 6000519 800S-800-R-90 13.50 8.00 12.38 $ 1,195.00 6000520 800S-1000-R-90 13.50 10.00 15.38 $ 1,410.00 6000521 1000S-1000-R-90 16.00 10.00 15.38 $ all or Quote O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G2" Groove lange 2 "-G1/2" Groove both langes ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.39

Section 7 90 Mitered lbows &N orporation High Vacuum omponents Since 1965 90 Mitered lbow - ixed langes Materials 304 Stainless Steel Product Notes oth flanges have a fixed bolt hole orientation O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials (i.e. 316 stainless steel) PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000523 100S-150-90M 4.25 1.50 3.25 $ 240.00 6000525 150S-200-90M 5.00 2.00 3.25 $ 260.00 6000526 150S-250-90M 5.00 2.50 3.25 $ 280.00 6000529 200S-300-90M 6.00 3.00 5.12 $ 380.00 6000530 300S-300-90M 7.50 3.00 5.12 $ 405.00 6000531 300S-400-90M 7.50 4.00 5.12 $ 420.00 6000532 400S-400-90M 9.00 4.00 5.12 $ 470.00 6000533 400S-600-90M 9.00 6.00 5.25 $ 475.00 6000534 600S-600-90M 11.00 6.00 6.44 $ 650.00 6000535 600S-800-90M 11.00 8.00 7.38 $ 820.00 6000536 800S-800-90M 13.50 8.00 7.75 $ 1,010.00 6000537 800S-1000-90M 13.50 10.00 9.88 $ 1,225.00 6000538 1000S-1000-90M 16.00 10.00 9.88 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G1/2" Groove both langes 7.40 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

90 Mitered lbows Section 7 High Vacuum omponents Since 1965 &N orporation 90 Mitered lbow - Rotatable lange 1 Materials 304 Stainless Steel Product Notes One ixed and one Rotatable flange per fitting O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations 2 IX lternative Materials (i.e. 316 stainless steel) rotatable PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000540 100S-150-R-90M 4.25 1.50 3.25 $ 325.00 6000542 150S-200-R-90M 5.00 2.00 3.25 $ 335.00 6000543 150S-250-R-90M 5.00 2.50 3.25 $ 360.00 6000546 200S-300-R-90M 6.00 3.00 5.12 $ 485.00 6000547 300S-300-R-90M 7.50 3.00 5.12 $ 505.00 6000548 300S-400-R-90M 7.50 4.00 5.12 $ 535.00 6000549 400S-400-R-90M 9.00 4.00 5.12 $ 575.00 6000550 400S-600-R-90M 9.00 6.00 5.25 $ 645.00 6000551 600S-600-R-90M 11.00 6.00 6.44 $ 815.00 6000552 600S-800-R-90M 11.00 8.00 7.38 $ 995.00 6000553 800S-800-R-90M 13.50 8.00 7.75 $ 1,195.00 6000554 800S-1000-R-90M 13.50 10.00 9.88 $ 1,410.00 6000555 1000S-1000-R-90M 16.00 10.00 9.88 $ all or Quote O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition list below. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1 "-G2" Groove lange 2 "-G1/2" Groove both langes ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.41

Section 7 S Tees &N orporation High Vacuum omponents Since 1965 Tee - ixed langes Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance Options: all for price and delivery ustom Lengths ustom lange ombinations 1 2 langes have a fixed bolt hole orientation O-ring groove available (see chart below) Reducing Tee ittings lternative Materials - 316 stainless steel, luminum, etc. 3 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000557 100S-150-T 4.25 1.50 2.50 $ 390.00 6000559 150S-200-T 5.00 2.00 3.25 $ 410.00 6000560 150S-250-T 5.00 2.50 3.25 $ 440.00 6000563 200S-300-T 6.00 3.00 3.50 $ 495.00 6000565 300S-400-T 7.50 4.00 5.12 $ 625.00 6000566 400S-400-T 9.00 4.00 5.12 $ 645.00 6000567 400S-600-T 9.00 6.00 5.25 $ 755.00 6000568 600S-600-T 11.00 6.00 6.44 $ 1,135.00 6000569 600S-800-T 11.00 8.00 7.38 $ 1,290.00 6000570 800S-800-T 13.50 8.00 7.75 $ 1,660.00 6000571 800S-1000-T 13.50 10.00 9.88 $ 1,945.00 6000572 1000S-1000-T 16.00 10.00 9.88 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. 7.42 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S Tees Section 7 High Vacuum omponents Since 1965 &N orporation Tee - Rotatable langes Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance One ixed and one Rotatable flange per axis O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations Reducing Tee ittings lternative Materials - 316 stainless steel, luminum, etc. 1 IX 2 3 rotatable PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000574 100S-150-R-T 4.25 1.50 2.50 $ 495.00 6000576 150S-200-R-T 5.00 2.00 3.25 $ 515.00 6000577 150S-250-R-T 5.00 2.50 3.25 $ 545.00 6000580 200S-300-R-T 6.00 3.00 3.50 $ 670.00 6000582 300S-400-R-T 7.50 4.00 5.12 $ 825.00 6000583 400S-400-R-T 9.00 4.00 5.12 $ 830.00 6000584 400S-600-R-T 9.00 6.00 5.25 $ 940.00 6000585 600S-600-R-T 11.00 6.00 6.44 $ 1,400.00 6000586 600S-800-R-T 11.00 8.00 7.38 $ 1,555.00 6000587 800S-800-R-T 13.50 8.00 7.75 $ 1,925.00 6000588 800S-1000-R-T 13.50 10.00 9.88 $ 2,210.00 6000589 1000S-1000-R-T 16.00 10.00 9.88 $ all or Quote O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.43

Section 7 S rosses &N orporation High Vacuum omponents Since 1965 ross - ixed langes Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance Options: all for price and delivery ustom Lengths ustom lange ombinations 1 4 2 langes have a fixed bolt hole orientation O-ring groove available (see chart below) Reducing ross ittings lternative Materials - 316 stainless steel, luminum, etc. 3 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000591 100S-150-X 4.25 1.50 2.50 $ 510.00 6000593 150S-200-X 5.00 2.00 3.25 $ 535.00 6000594 150S-250-X 5.00 2.50 3.25 $ 585.00 6000597 200S-300-X 6.00 3.00 3.50 $ 665.00 6000599 300S-400-X 7.50 4.00 5.12 $ 895.00 6000600 400S-400-X 9.00 4.00 5.12 $ 940.00 6000601 400S-600-X 9.00 6.00 5.25 $ 1,185.00 6000602 600S-600-X 11.00 6.00 6.44 $ 1,645.00 6000603 600S-800-X 11.00 8.00 7.38 $ 1,775.00 6000604 800S-800-X 13.50 8.00 7.75 $ 2,120.00 6000605 800S-1000-X 13.50 10.00 9.88 $ 2,750.00 6000606 1000S-1000-X 16.00 10.00 9.88 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. 7.44 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S rosses Section 7 High Vacuum omponents Since 1965 &N orporation ross Rotatable langes Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance One ixed and one Rotatable flange per axis O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations Reducing ross ittings lternative Materials - 316 stainless steel, luminum, etc. 1 4 3 rotatable IX 2 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000608 100S-150-R-X 4.25 1.50 2.50 $ 610.00 6000610 150S-200-R-X 5.00 2.00 3.25 $ 640.00 6000611 150S-250-R-X 5.00 2.50 3.25 $ 685.00 6000614 200S-300-R-X 6.00 3.00 3.50 $ 835.00 6000616 300S-400-R-X 7.50 4.00 5.12 $ 1,080.00 6000617 400S-400-R-X 9.00 4.00 5.12 $ 1,125.00 6000618 400S-600-R-X 9.00 6.00 5.25 $ 1,370.00 6000619 600S-600-R-X 11.00 6.00 6.44 $ 1,910.00 6000620 600S-800-R-X 11.00 8.00 7.38 $ 2,040.00 6000621 800S-800-R-X 13.50 8.00 7.75 $ 2,385.00 6000622 800S-1000-R-X 13.50 10.00 9.88 $ 3,050.00 6000623 1000S-1000-R-X 16.00 10.00 9.88 $ all or Quote O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.45

Section 7 S rosses &N orporation High Vacuum omponents Since 1965 5-Way ross - ixed langes 4 Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance langes have a fixed bolt hole orientation O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials - 316 stainless steel, luminum, etc. 1 3 5 2 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000625 100S-150-5X 4.25 1.50 2.50 $ 600.00 6000626 150S-200-5X 5.00 2.00 3.25 $ 690.00 6000627 150S-250-5X 5.00 2.50 3.25 $ 775.00 6000629 200S-300-5X 6.00 3.00 3.50 $ 890.00 6000631 300S-400-5X 7.50 4.00 5.12 $ 1,220.00 6000632 400S-400-5X 9.00 4.00 5.12 $ 1,280.00 6000633 400S-600-5X 9.00 6.00 5.25 $ 1,705.00 6000634 600S-600-5X 11.00 6.00 6.44 $ 2,250.00 6000635 600S-800-5X 11.00 8.00 7.38 $ 2,370.00 6000636 800S-800-5X 13.50 8.00 7.75 $ 2,805.00 6000637 800S-1000-5X 13.50 10.00 9.88 $ 3,550.00 6000638 1000S-1000-5X 16.00 10.00 9.88 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. 7.46 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S rosses Section 7 High Vacuum omponents Since 1965 &N orporation 5-Way ross - Rotatable langes Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance One ixed and one Rotatable flange per axis Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials - 316 stainless steel, luminum, etc. 1 4 3 IX 5 2 O-ring groove available (see chart below) rotatable PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000640 100S-150-R-5X 4.25 1.50 2.50 $ 755.00 6000641 150S-200-R-5X 5.00 2.00 3.25 $ 850.00 6000642 150S-250-R-5X 5.00 2.50 3.25 $ 935.00 6000644 200S-300-R-5X 6.00 3.00 3.50 $ 1,145.00 6000646 300S-400-R-5X 7.50 4.00 5.12 $ 1,495.00 6000647 400S-400-R-5X 9.00 4.00 5.12 $ 1,555.00 6000648 400S-600-R-5X 9.00 6.00 5.25 $ 1,980.00 6000649 600S-600-R-5X 11.00 6.00 6.44 $ 2,645.00 6000650 600S-800-R-5X 11.00 8.00 7.38 $ 2,770.00 6000651 800S-800-R-5X 13.50 8.00 7.75 $ 3,200.00 6000652 800S-1000-R-5X 13.50 10.00 9.88 $ 3,930.00 6000653 1000S-1000-R-5X 16.00 10.00 9.88 $ all or Quote O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.47

Section 7 S rosses &N orporation High Vacuum omponents Since 1965 6-Way ross - ixed langes 4 Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance langes have a fixed bolt hole orientation O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials - 316 stainless steel, luminum, etc. 1 lange 6 (other side) 3 5 2 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000655 100S-150-6X 4.25 1.50 2.50 $ 800.00 6000656 150S-200-6X 5.00 2.00 3.25 $ 850.00 6000657 150S-250-6X 5.00 2.50 3.25 $ 970.00 6000659 200S-300-6X 6.00 3.00 3.50 $ 1,225.00 6000661 300S-400-6X 7.50 4.00 5.12 $ 1,550.00 6000662 400S-400-6X 9.00 4.00 5.12 $ 1,620.00 6000663 400S-600-6X 9.00 6.00 5.25 $ 2,220.00 6000664 600S-600-6X 11.00 6.00 6.44 $ 2,855.00 6000665 600S-800-6X 11.00 8.00 7.38 $ 2,970.00 6000667 800S-800-6X 13.50 8.00 7.75 $ 3,485.00 6000668 800S-1000-6X 13.50 10.00 9.88 $ 4,350.00 6000669 1000S-1000-6X 16.00 10.00 9.88 $ all or Quote &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. 7.48 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com

S rosses Section 7 High Vacuum omponents Since 1965 &N orporation 6-Way ross - Rotatable langes Materials 304 Stainless Steel Product Notes Pulled ports for optimum vacuum performance One ixed and one Rotatable flange per axis O-ring groove available (see chart below) Options: all for price and delivery ustom Lengths ustom lange ombinations lternative Materials - 316 stainless steel, luminum, etc. lange 6 (other side) 1 4 3 rotatable IX 5 2 PRT RRN lange Tube UNIT NUMR NUMR o.. o.. PRI 6000671 100S-150-R-6X 4.25 1.50 2.50 $ 955.00 6000672 150S-200-R-6X 5.00 2.00 3.25 $ 1,005.00 6000673 150S-250-R-6X 5.00 2.50 3.25 $ 1,125.00 6000675 200S-300-R-6X 6.00 3.00 3.50 $ 1,485.00 6000677 300S-400-R-6X 7.50 4.00 5.12 $ 1,825.00 6000678 400S-400-R-6X 9.00 4.00 5.12 $ 1,895.00 6000679 400S-600-R-6X 9.00 6.00 5.25 $ 2,500.00 6000680 600S-600-R-6X 11.00 6.00 6.44 $ 3,250.00 6000681 600S-800-R-6X 11.00 8.00 7.38 $ 3,365.00 6000682 800S-800-R-6X 13.50 8.00 7.75 $ 3,885.00 6000683 800S-1000-R-6X 13.50 10.00 9.88 $ 4,745.00 6000684 1000S-1000-R-6X 16.00 10.00 9.88 $ all or Quote O-Ring Groove Option lange Size dditional Per. lange ost 100S $ 20.00 150S $ 20.00 200S $ 20.00 300S $ 35.00 400S $ 35.00 600S $ 50.00 800S $ 55.00 1000S $ 60.00 &N NSI/S flanged fittings come standard with a smooth flange face. The addition of an o-ring groove is a standard option. If you require a grooved flange the additional charge for this is detailed in this chart. Let us know which flange(s) to add the groove to by referencing the part number addition notes to the right. Please Note: dding a groove is customizing this product and is no longer returnable. dd to the end of the part number: "-G1" Groove lange 1, "-G2" Groove lange 2, etc. dd to the end of the part number: "-G1/2" Groove flange 1 and 2 "-G1/3" Groove flange 1 and 3, etc. ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com 7.49

Section 7 S Hybrid daptors &N orporation High Vacuum omponents Since 1965 Hybrid dapters to L onical Reducer Q to NPT emale Q to S Q to Quick isconnect &N orporation offers an extensive selection of standard adapters to ease design and assembly of your vacuum systems. dapter ittings and langes are used to change from one family of flanges to another. or example, ISO-Q25 to 275. or these products see Section 9: Hybrid dapters Please Note: There is a difference between adapters (described above) and reducers. Reducer ittings are used to reduce the size of flanges and tubing used within the same flange family. or example, 600 to 275 or ISO-L63 to ISO-Q40. These products are listed with the fittings components for that flange family. Q to Swagelok Q to all Socket Grooved &N orporation 707 Southwest 19th venue Williston, lorida 32696 (352) 528-4100 1(800) LNG1 X (352) 528-3441 www.ancorp.com 7.50 ll Registered Trademarks are the property of their respective companies, see Intro. pg. 7. (352) 528-4100 1(800) LNG1 www.ancorp.com