GLOW PROJECT INFORMATION DOWNLIGHT PROJECT DATE TYPE 1-1/2" LONG 3" LONG 4" LONG Nano Glow Recessed Round Downlight - The Nano Glow provides a gentle ambient glow to your space through a decorative opal glass element that protrudes below the ceiling plane. Nano Glow delivers industry leading lumen output from a 2.5" aperture. DELIVE PERFORMANCE (PROJECTED) 4 3 /8" GLOW 14 Watts 20 Watts Downlight Color Rendering 80+ CRI 90+CRI 80+ CRI 90+CRI Lumens per Watt 53 44 49 40 Opal Glass 1 1 /2"(shown) 3" 4" Source Lumens 950 775 1250 1025 Delivered Lumens 750 625 1000 825 Color Consistency Performance based on: 3000K 2-Step MacAdam Ellipse Opal Glass Trim Finish Color area (10,13, 21, 28, RAL) HOW TO SPECIFY Ordering Example: Specify trim code and housing code to order: T - P1 - M2-14- 27KS - 25-10 - LSP55-120V - DIML2 - CB27 - BOFC TRIM ORDERING INFORMATION TRIM OPTION GLASS OPTIONS LIGHT ENGINE M2 WATTAGE COLOR REFLECTOR TRIM FINISH Round Glow Downlight T With Trim L Trimless P1 1-1/2" Opal Glass P3 3" Opal Glass P4 4" Opal Glass M2 14 14W 750 lumens 20 20W 1000 lumens Standard CRI 80+ 27KS 2700K, 80+ CRI 30KS 3000K, 80+ CRI 35KS 3500K, 80+ CRI High CRI 90+ 27KH 2700K, 90+ CRI 30KH 3050K, 90+ CRI 25 25 Distribution 10 White 35 35 Distribution 13 Statuary Bronze 21 Black 28 Metalized Grey RAL Special Color (specify RAL#) 2 Step MacAdam ellipse is standard HOUSING ORDERING INFORMATION HOUSING VOLTAGE OPTIONAL * ACCESSORIES OPTICAL ACCESSORIES 2 LSP51 Max. ceiling thickness: 1" LSP55 Max. ceiling thickness: 1-1/2" LSH41 Max. ceiling thickness: 1" LSH45 Max. ceiling thickness: 1-1/2" IC / Airtight LIC1 Max. ceiling thickness: 1" LIC5 Max. ceiling thickness: 1-1/2" Chicago Plenum LCP1 Max. ceiling thickness: 1" LCP5 Max. ceiling thickness: 1-1/2" 120V 277V DIML2 Low voltage 15% DIML3 Lutron Hi-Lume 1% 2-wire, 120V only DIML4 Lutron Hi-Lume 1% 3-wire/ECO DIML6A ELDO 0.1%, logarithmic DIML6B ELDO 0.1%, linear DIML9 TRIAC 15%, 120V only DIML10 ELV 15%, 120V only CB27 27" C-Channel Bars CB52 52" C-Channel Bars EML Emergency battery 1 EMLW Emergency battery, wet location 1 BOFC Borosilicate Frosted Lens SOFC Solite Frosted Lens PRFC Prismatic Frosted Lens 1 Requires above ceiling access for service. For use with housings only. 2 2 maximum optical accessories
GLOW DOWNLIGHT TRIM INFORMATION HOUSING INFORMATION Opal Glass Trim Finish Color area (10,13, 21, 28, RAL) 4 3 /8" 1 1 /2"(shown), 3" or 4" Opal Glass 5 1 /2" shown with EML LSP51 w/ EM (Max. Ceiling Thickness - 1") LSP55 W/ EM (Max. Ceiling Thickness - 1 1 /2") LSP51 w/ EM = 6 1 /2" Overall LSP55 w/ EM = 7" Overall 14 3 /4" LSP51 w/ EM = 1 Max. Ceiling Thickness LSP55 w/ EM = 1-1/2" Max. Ceiling Thickness LSP51 (Max. Ceiling Thickness - 1") LSP55 (Max. Ceiling Thickness - 1 1 /2") IC / Airtight LIC1 (Max. Ceiling Thickness - 1") LIC5 (Max. Ceiling Thickness - 1 1 /2") CP / Chicago Plenum - CCEA Approved LCP1 (Max. Ceiling Thickness - 1") LCP5 (Max. Ceiling Thickness - 1 1 /2") 5 1 /2" LSP51 = 6 1 /2" Overall LSP55 = 7" Overall 7 7 /16" LIC1 = 8 7 /16" Overall LIC5 = 8 15 /16" Overall 7 7 /16" LCP1 = 8 7 /16" Overall LCP5 = 8 15 /16" Overall LSP51 = 1" Max. Ceiling Thickness LSP55 = 1-1/2" Max. Ceiling Thickness LIC1 = 1" Max. Ceiling Thickness LIC5 = 1-1/2" Max. Ceiling Thickness LCP1 = 1" Max. Ceiling Thickness LCP5 = 1-1/2" Max. Ceiling Thickness 13 1 /4" 12" 12" 4 1 /2" LSH41 = 1 Max. Ceiling Thickness LSH45 = 1-1/2" Max. Ceiling Thickness SPECIFICATIONS TRIM: 2-1/2" round aperture with a 3/4" flange, retained by two mounting clips. Decorative opal glass cylinder available in 1-1/2", 3" and 4" lengths. Trim finish is available in White, Statuary Bronze, Black, and Metalized Grey finishes. Custom color flanges available (provide RAL#). TRIM LENS: Solite lens provided standard. REFLECTOR: Interchangeable tool-less reflector system allows for flexibility while maintaining design consistency. Available in 25 or 35 beam distribution. FIELD REPLACEABLE LIGHT ENGINE: Available in 14W (750 delivered lumens) and 20W (1000 delivered lumens). Engine is field replaceable through the aperture. COLOR: Nano Glow is available in 3 color temperatures (2700K, 3000K, 3500K). All color options are tightly binned for fixture-to-fixture color consistency within a 2-Step MacAdam Ellipse. 80+ and 90+ color rendering index available. RATED LIFE: Based on IESNA LM80-2008 50,000 hours at 70% lumen maintenance (L70). 16 3 /8" LSH41 (Max. Ceiling Thickness - 1") LSH45 (Max. Ceiling Thickness - 1 1 /4") LSH41 = 5 1 /2" Overall LSH45 = 6" Overall 17 1 /2" THERMAL MANAGEMENT: Proprietary high performance aluminum die cast heatsink for maximum life. Ambient temperatures at fixture location should not exceed 40 C during normal operation. FIELD REPLACEABLE : Solid state electronic constant current driver with a high power factor provided standard. Specify 120V or 277V. Driver complies with IEEE C62.41 surge protection. OPTIONS: Multiple dimming drivers available. See compatibility chart attached. Note: DIML6A logarithmic control is intended for use with Lutron control systems; DIML6B linear control is intended for use with non-lutron controls. EMERGENCY: Emergency lighting battery pack with remote test switch requires above ceiling access. Bodine BSL17C-C2 provides 260mA for 90 minutes; delivers ~550-600 lumens. EMLW wet location option also available. EML options available with housings only. MOUNTING: Butterfly brackets and adjustable nailer bars with integral nails provided. Nailer bars are extendible from 14" to 24" centers. 17 5 /8" 5 1 /4" - shown with EML LSH41 (Max. Ceiling Thickness - 1") LSH45 (Max. Ceiling Thickness - 1 1 /4") LSH41 = 5 1 /2" Overall LSH45 = 6" Overall 6 3 /8" 17 5 /8" HOUSING: Fabricated of 20 ga. black powder coated steel with thru wire J-box, 2 in 2 out at min. 90 C, #12 AWG thru branch circuit wiring. ACCESSORY HOLDER: 360 rotating, "C" size accessory holder. Maxium 2 lenses. MAXIMUM CEILING THICKNESS: As per drawings above. CEILING CUT OUT: 3-1/2" Ø LISTINGS: Dry/Damp. Wet listed for trimmed only. NRTL/CSA-US tested to UL Standards. IBEW Union made. WARRANTY: 5 years LSH41 = 1 Max. Ceiling Thickness LSH45 = 1-1/2" Max. Ceiling Thickness NOTES: Trimless for drywall installation only. 4 1 /2" PHOTOMETRICS: Consult factory or website for IES files. Tested in accordance with IESNA LM79-2008.
WIRING SCHEMES: DIML2 : Dimming Driver Wiring (Dims down to 15%) For use with fluorescent type controls. Use only with approved vendor models in table below Crestron Dimmer Intensity Dimmer CCT + - COMPATIBILITY DIML2 & DIML3 Leviton and Lightolier Dimmer Wiring Leviton: IP710-DLX Lightolier: V2000FAMU Dimmer CCT + - BUILDING POWER WIRING NOTE WIRE Compatible Dimming System: NOTE: Consult dimmer manufacturer for detailed installation information. Manufacturer Dimmer Fixtures Measured Model per Min-Max % Light Output Dimmer Limits (2) (3) Crestron CLS-EXP-DIMFLV (1) 0-100% 15-100% Crestron DIN-4DIMFLV4 (1) 0-100% 15-100% Crestron DIN-A08 (1) 0-100% 15-100% Crestron GLX-DIMFLV8 (1) 0-100% 15-100% Crestron GLXP-DIMFLV8 (1) 0-100% 15-100% Leviton IP710-DLX (1) 0-100% 15-100% Lightolier V2000FAMV (1) 0-100% 15-100% Lutron DIVA DVTV-XX (1) 0-100% 15-100% BUILDING POWER WIRING NOTE WIRE NOTE: DIML2 dimming driver sources 2mA (2) % Level refers to the Control System Intensity. Operating the dimmer below the Min % level may cause flicker. Operating the dimmer above the Max % may show no additional brightness. (3) % Level of light output from fixture when connected directly to power source DIML3 : Lutron Hi-Lume A-Series 2 Wire Fwd Phase (with neutral) / Dimming Driver Wiring (Dims down to 1%) 120V only. Compatible Lutron Dimmers / Test Results Fixtures Measured Product Part Number Per Dimmer Light Output 120V Only* Range NovaT NTLV-600-CPN0199 1 8 100% - 1% Maestro Wireless MRF2-6ND-120 1 8 100% - 1% RadioRA 2 1000W RRD-10ND 1 13 100% - 1% RadioRA 2 Adaptive dimmer RRD-6NA 1 8 100% - 1% RadioRA 600W RA-6ND 1 8 100% - 1% RadioRA 1000W RA-10ND 1 13 100% - 1% HomeWorks QS 600W HQRD-6ND 1 8 100% - 1% HomeWorks QS 1000W HQRD-10ND 1 13 100% - 1% HomeWorks QS Adaptive dimmer HQRD-6NA 1 8 100% - 1% HomeWorks QS WPM HQRJ-WPM-6D-120 1 10 HomeWorks 600W dimmer HRD-6ND 1 8 100% - 1% HomeWorks 1000W dimmer HWD-10ND, HRD-10ND 1 8 100% - 1% HomeWorks WPM HWI-WPM-6D-120 1 10 GRAFIK Eye QS QSGR-, QSGRJ- 1 10 GRAFIK Eye 3000 GRX-3100, GRX-3500 1 10 RPM-4U Module HW-RPM-4U-120, 1 26 (LCP, HomeWorks, LP-RPM-4U-120 RPM-4A Module HW-RPM-4A-120, 1 13 (LCP, HomeWorks, LP-RPM-4A-120 GP Panels (LCP, HomeWorks, Various 1 26 100% - 1% Stanza SZ-6ND 1 8 100% - 1% * Fixtures per Dimmer value assumes a 40W fixture. Number of fixtures may be higher if wattage is less than 40W. NOTE: Contact Lutron tech support for deganging rules when using wallbox controls on the Hi-lume A-Series Driver. Compatible ETC Dimming Cabinets / Test Results Approved for use with: ETC Sensor + Cabinet with D20 dimming module ETC Unison DRd Cabinet with D20 dimming module NOTE: Additional dim configuration required for optimum performance. Wire Diagram for 2-Wire Control Forward Phase with Neutral 2-Wire Dimmer V-
WIRING SCHEMES: COMPATIBILITY DIML4, DIML6A & DIML6B DIML4 : Lutron Hi-Lume A-Series Driver with Eco System Control / Dimming Driver Wiring (Dims down to 1%) Compatible Lutron Dimmers / Test Results Compatible ETC Dimming Cabinets / Test Results Approved for use with: ETC Sensor+ Cabinet with D20F dimming module ETC Unison DRd Cabinet with D20F dimming module NOTE: Additional dim configuration required for optimum performance. Wire Diagram for 3-Wire FL Control (no Eco System Control) FL Control ORANGE DIMMED HOT V- E2 E1 / ECO-SYS BUS CAP WIRES Wire Diagram for ECO System Digital Control ECO SYSTEM Control CAP LEAD ORANGE DIMMED HOT V- E2 E1 / ECO-SYS BUS DIML6A : eldo SOLOdrive 561/S control 100%-0% dimming driver For Lutron Controls (dims down to 0.1%). Product Part Number Fixtures Dimming Per Dimmer Range Diva DVTV/NFTV/N TFTV with PP-20 (1) 0.1% - 99% Energi Savr Node QSN-4T16-S (1) 0.1% - 100% Panels TVM2 Module (1) 0.1% - 99% Interfaces GRX-TVI w GRX3503 (1) 0.1% - 100% Test Comment: Some delay may be experienced at low light levels or wattages when the load is turned off DIML6B : eldo SOLOdrive 561/S control 100%-0% dimming driver For Non-Lutron Controls (dims down to 0.1%). Measured Product Part Number Fixtures Dimming Per Dimmer Range Bush-Jaeger 2112U-101 (1) 0.1% - 100% Jung 240-10 (1) 0.1% - 100% Leviton 0.1% - 100% Controls IllumaTech-IP710-DLX (1) 0.1% - 100% Lightolier Controls ZP600FAM120 (1) 0.1% - 100% Merten 5729 (1) 0.1% - 100% Pass & Seymour CD4FB -W (1) 0.1% - 100% The Wall Stopper DCLV1 (1) 0.1% - 100% GRAY LIVE (+) (-)
WIRING SCHEMES: COMPATIBILITY DIML9 & DIML10 DIML9 : TRIAC Dimming Driver Wiring (Dims down to 15%) 120V Only 2 WIRE FWD PHASE TRIAC DIML10 : ELV Dimming Driver Wiring (Dims down to 15%) 120V Only 2 WIRE REVERSE PHASE ELV