Canalkler 250, Canal cleaning hose... 41 Trellblast, Sandblasting hose... 41 Boat hose - SP 10032, Sanitary hose... 42 Boat Exhaust hose - AG 2100, Corrugated ISO 13363 type 2, Exhaust hose, boat... 42 GS Eksoflex, Exhaust hose... 43 AG 1000 HT, Exhaust and waste gas hose... 43 Chemikler SD, Chemical hose... 44 Chemikler D, Chemical hose... 44 Solvykler, Chemical hose... 45 Pulsor 125, Concrete pumping hose... 45 Trellvac Handler HD, Suction hose, type 5100... 46 Trellvac Handler MD, Suction hose, type 4500... 46 FP 8000, Fish vacuum hose... 47 FP 2007, Fish pumping hose... 47 40
Special SPECIAL hoses HOSES technical info ventilation Steam food oil air & pressure & petrol & water valves & flanges intro Canalkler 250 Canal cleaning hose For high pressure flushing of drainage/ waste systems. Canalkler 250 has an extremely strong cover, which is highly abrasion resistant. All hoses are delivered mounted with couplings BSB Male/BSP Female. Different couplings may be delievered upon request. TUBE: SBR, black, smooth COVER: SBR/NR, black, smooth REINF.: Synthetic textile braid SAFETY FACTOR: 1:2.5 TEMP: -30 C + 80 C APPR.: ZH 401/1 Pressure tested and certified i.a.w. DIN 50049.3.1B /EN 10204 3.1B. INFO: All hoses are delivered with test certificates COUPL.: Standard with BSP. For other conn., please contact GS-Hydro MARKING: Canalkler Trellblast Sandblasting hose For cleaning and sandblasting of cement, metal, stone etc. ELECTRICAL Conductive rubber tube R< 10 6 ohm/mtr. Particularly abrasion resistant < 70 3 of tube i.a.w. DIN 53516 TUBE: NR, black, smooth COVER: SBR, black, wrapped REINF.: Synthetic textile, braided SAFETY FACTOR: 1:3 TEMP: -30 C + 70 C MARKING: Trellblast 051127-08 13 1/2 6,3 250 625 70 0,45 120 051127-16 25 1 7,15 250 625 100 0,90 120 051127-20 32 1 1/4 7,8 250 625 130 1,12 120 Offshore cargo Couplings, clamps & pneumatics gas & welding 051117-12 19 3/4 7,5 10 30 100 0,74 40 051117-16 25 1 7,0 10 30 125 0,86 40 051117-20 32 1 1/4 8,0 10 30 160 1,30 40 Steel Special suction 41
Boat hose - SP 10032 Sanitary hose Special hose for toilets on board leisure boats. Flexible, prevents smell from reaching through the hose wall. Easy to cut and cut proof, due to the PVC spiral. Partly smooth/corrugated TUBE: Diffusion resistant butyl rubber, black, smooth COVER: EPDM, grey, wrapped 051131-24 38,0 1 1/2 4,75 10 32 160 0,98 40 Boat Exhaust hose - AG 2100 Corrugated ISO 13363 type 2 Exhaust hose, boat Exhaust hose for boats with watercooled waste gas systems. - Very flexible - Weather resistant, light weight - Corrugated and easy handling - DNV approved TUBE: CR, black, smooth COVER: REINF.: CR, black, corrugated Synthetic textile and helix wire TEMP: -30 C + 100 C periodically up to +580 C APPR.: Certified by DNV i.a.w. ISO 13363 type 2 SAE J 2006 type R2 Nordic Boat Stand. MC9 MARKING: AG 2100 051132-20 32 1 1/4 5 5 15 80-40 051132-24 38 1 1/2 5 5 15 90-40 051132-28 44 1 3/4 5 5 15 100-40 051132-32 50 2 6 5 15 125-40 051132-48 76 3 5 3 9 200 1,81 40 051132-64 102 4 5 2 6 275 2,42 40 051132-80 127 5 5,5 2 6 425 2,98 40 42
technical info ventilation Steam food oil air & pressure & petrol & water valves & flanges intro GS Eksoflex Exhaust hose APPLICATION Trucks, buses, cars and industry Protective hose, for transportation of granulates, gas, dry exhaust etc. TUBE: Stainless steel COVER Stainless steel REINF.: Coppercoat TEMP: Max +700 C MARKING: GS-Eksoflex AG 1000 HT Exhaust and waste gas hose For suction of exhaust and other heated gases from vehicles. The hose is suitable for all kinds of exhaust suction from garages, mechanical workshops etc. AG 1000 HT is particularly light and easy handling, due to its high level of flexibility. The hose lengths may easily be connected. TUBE: Heat resistant rubber, EPDM/polyester, black COVER: Rubber cord, black REINF.: EPDM-covered polyester TEMP: HT -30 C + 180 C MARKING: AG 1000 HT Dim.-HT Offshore cargo Couplings, clamps & pneumatics gas & welding Vacuum % 051134-16 25 1 4,0 - - 130 0,47 5-20 051134-20 32 1 1/4 4,0 - - 160 0,61 5-20 051134-24 38 1 1/2 4,0 - - 230 0,72 5-20 051134-32 51 2 4,0 - - 250 1,11 5-20 051134-40 65 2 1/2 4,0 - - 285 1,45 5-20 051134-48 75 3 4,0 - - 310 1,69 5-20 051134-64 100 4 4,0 - - 375 2,69 5-20 051145-48 76 3 1 25 95 0,62 10 051145-64 102 4 1 20 110 0,90 10 051145-80 127 5 1 15 130 1,10 10 051145-96 152 6 1 10 140 1,32 10 Steel Special suction 43
Chemikler SD Chemical hose Suction and pressure hose for transportation of corrosive chemicals, corroding acids, aromatic solutions, chlorides, oxidizing solutions etc. Used on tankers, tank wagons, wharf docks, cargo boats, stationary installations and chemical installations. -Versatile hose which may be used for most chemicals -High degree of abrasion resistance -Excellent bending radius and flexibility -Smooth rubber tube simplifies cleaning (tolerates up to + 140 C for 30 minutes) -Highly abrasion resistant rubber cover -Chemical resistance tables may be sent upon request TUBE: Ultra high molecular polyethylene, UPE, black, smooth COVER: Weather resistant cover. EPDM, black, wrapped REINF.: Synthetic textile braiding and TEMP: helix wire -40 C + 100 C periodically up to +140 C EL. APPLIC: Conductive UPE rubber tube < 106 ohm/mtr APPR.: Standard approval EN 12115 MARKING: CHEMICALIER UPE COUplingS/ ACC.: Contact GS-Hydro regarding the best coupling solution for the relevant application. Vac. % 051133-12 19 3/4 6,5 16 48 125 90 0,74 40 051133-16 25 1 6,5 16 48 150 90 0,90 40 051133-20 32 1 1/4 6,5 16 48 175 90 1,07 40 051133-24 38 1 1/2 6,5 16 48 225 90 1,32 40 051133-32 52 2 7,75 16 48 275 90 1,85 40 051133-40 63 2 1/2 7,75 16 48 310 90 2,54 40 051133-48 76 3 8,5 16 48 350 90 3,23 40 051133-64 102 4 9,0 16 48 500 90 4,89 40 Chemikler D, Chemical hose For transporting moderate amounts of corrosive chemicals, ketones, alcohols and acids. For tankers and tank wagons (trains). - Excellent level of resistance against abrasion and corrosion - Very good mechanical qualities - Smooth and seamless tube - Cleaning at +130 C for 30 minutes - Condustive rubber tube R< 106 ohm/mtr TUBE: Resistant to chemicals, EPDM, black, smooth COVER: Resistant to chemicals and weather, EPDM, black, wrapped REINF.: Synthetic textile, wrapped TEMP: -40 C + 100 C APPR.: Standard approval EN 12115 MARKING: CHEMI-KLER D EPDM COUPLINGS/ ACC.: Contact GS-Hydro regarding the best coupling solution for the relevant application. Vac. % 051153-12 19 3/4 6,0 16 64 125 90 0,55 40 051153-16 25 1 6,0 16 64 150 90 0,68 40 051153-20 32 1 1/4 6,0 16 64 175 90 0,82 40 051153-24 38 1 1/2 8,0 16 64 225 90 0,96 40 051153-32 50 2 8,0 16 64 275 90 1,52 40 051153-40 65 2 1/2 8,0 16 64 320 90 1,98 40 051153-48 75 3 8,0 16 64 350 90 2,27 40 051153-64 100 4 8,0 16 64 450 90 2,95 40 44
intro Solvykler Chemical hose Pressure hose for ester, ketones, alcohol based colors and a wide range of chemicals. May also be used as compressed air hose, especially for air supply to paint pistols and other applications demanding green hose. - Cover is resistant to corrosive chemicals - Silicone free - Remains flexible within a large temperature range. - Antistatic rubber tune - Conductive rubber tube R< 106 ohm/mtr TUBE: Resistant to chemicals, EPDM, black, smooth COVER: Resistant to chemicals and weather, EPDM, olive green, smooth REINF.: Synthetic textile braiding TEMP: -30 C + 100 C MARKING: SOLVYKLER Pulsor 125 Concrete pumping hose For pumping concrete and for transportation or jointing component in systems. Used for pumping concrete, brick and mud, as well as for pneumatic draining of cement ans minerals. Injection of cement, concrete and pus. - Particularly abrasion resistant, long life expectancy - Flexible and easy handling - Robust construction that tolerates compressing - Maximum degree of safety - May be cleaned by reverse pumping TUBE: Abrasion resistant NR, smooth, black COVER: Abrasion and weather resistant REINF.: NR, black, wrapped 65= 2 layers steel wire 75-150= 4 layers steel wire TEMP: -30 C + 80 C MARKING: PULSOR 125 COUPLINGS/ ACC.: Pressure couplings for all dimensions. All hoses are delive red with couplings dimensio ned in accordance with the concrete pump producer's details (Putzmeister, Swing etc.). 051154-04 6 1/4 3,5 20 60 60 0,13 40 051154-05 8 5/16 3,5 20 60 70 0,16 40 051154-06 10 3/8 4,0 20 60 90 0,22 40 051154-08 13 1/2 4,0 20 60 110 0,27 40 051154-10 16 5/8 4,0 20 60 130 0,31 40 051154-12 19 3/4 4,5 20 60 170 0,42 40 051154-16 25 1 4,5 20 60 150 0,55 40 051158-32 50 2 8,5 70 125 250 2,30 40 051158-40 65 1 1/2 9,5 70 125 250 3,88 40 051158-48 76,2 3 12,0 70 125 330 5,01 40 051158-64 101,6 4 13,7 70 125 380 7,12 20 051158-80 125 5 15,0 70 125 450 9,89 20 ventilation Steam food oil air & pressure & petrol & water Steel Special suction gas & welding Offshore cargo Couplings, clamps & pneumatics valves & flanges technical info 45
Trellvac Handler HD Suction hose, type 5100 Light weight, abrasion resistant hose with excellent flexibility, delevoped for suction trucks. Suitable as bend in vacuum systems. Trellvac HD is also most suitable for stationary systems. - Light and flexible, abrasion resistant - Smooth rubber cover - Suitable for suction of sand - Conductive rubber tube R< 106 ohm/mtr TUBE: Abrasion resistant NR, black COVER: Abrasion and weather resistant SBR rubber, black, smooth REINF.: Synthetic textile cord. Double helix wire TEMP: -30 C + 80 C MARKING: Trellvac Handler HD Max Vac % 051147-64 102 4 6 5 15 90 400 3,5 40 051147-80 127 5 6 5 15 80 500 4,3 40 051147-96 152 6 6 5 15 60 600 5,0 12 Trellvac Handler MD Suction hose, type 4500 Light weight, abrasion resistant hose with excellent flexibility, delevoped for suction trucks. Nonconductive. To obtain conduction of electricity, the spiral may be connected with the couplings in both ends. - Light and flexible. High level of abrasion resistance - Medium duty, to be used for light materials when weight and flexibility count. TUBE: COVER: REINF.: Abrasion resistant NR, black Abrasion and weather resistant SBR rubber, black, smooth Synthetic textile, woven, steel spiral Max Vac % 051146-48 73 3 5 5 15 90 295 2,0 12 051146-64 102 4 5 5 15 90 395 2,9 12 051146-80 127 5 5 5 15 80 495 3,9 12 051146-96 152 6 5 5 15 60 595 4,5 12 46
technical info ventilation Steam food oil air & pressure & petrol & water valves & flanges intro FP 8000 Fish vacuum hose Trelleborg's 3rd generation rubber hose for transportation of fish. Developed for use on vacuum pumping aggregates. The same hose may be used for pressure and suction. FP 8000 is intended for aluminium Bloc End couplings, which are to be mounted on the hose cover. This way, there are no components on the hose's inside that may damage/injure the fish. - For rough handling - Extremely abrasion resistant and flexible, including in low temperatures - 90% vacuum - Suitable for pressure up to 1 bar. - Abrasion resistant rubber tube tolerates fish grease - The coupling may be reused - May be delivered with special couplings TUBE: Trelleborg`s fish rubber COVER: SBR rubber, black, corrugated REINF.: Helix wire TEMP: -30 C + 80 C MARKING: Trelleborg, yellow stripe FP 2007 Fish pumping hose Hose for fish pumping, to be used within fish hatcheries, fish factories and on fishing boats. - Hose for fish pumping without spiral - Oil resistant - Flexible - For rough handling TUBE: Oil resistant SBR/NBR, black COVER: Weather resistant SBR/ NBR, rubber, black, wrapped REINF.: Synthetic cord TEMP: -40 C + 80 C MARKING: House brand Offshore cargo Couplings, clamps & pneumatics gas & welding 051152-192 305 12 17,5 1 3 90 25,7 10 051152-224 355 14 17,5 1 3 90 25,7 10 051155-160-30 254 10 3,5 2 7-3,1 30 051155-192-30 305 12 3,5 2 7-3,7 30 051155-192-40 305 12 3,5 2 7-3,7 40 051155-224-30 255 14 3,5 2 7-4,3 30 051155-224-40 255 14 3,5 2 7-4,3 40 Steel Special suction 47
GS-Hydro offers a wide range of composite hoses for chemicals and fuel The composite hoses are delivered with tube in the following materials: teflon, polyamide, polyester and polypropylene. Helix is available in aluminium, galvanized, stainless and polypropylene covered steel. Please contact GS-Hydro for further information on composite hoses. 48