Commercial Body Fittings 8th Edition

LASHING RINGS Commercial Body Fittings 8th Edition No. AROP410 wgt. 0.38kg l Size: W95 x L100mm l Recess: W75 x L76 x D27mm l 4 x 07.3mm Fixing holes No. AROP410/SPR wgt. 0.39kg l Size: W95 x L100mm l Recess: W75 x L76 x D27mm l Complete with spring loaded ring l 4 x 07.3mm Fixing holes No. AROP510/DR wgt. 0.44kg l Size: W105 x L105mm l Recess: W79 x L85 x D27mm l Drainage hole Drainage hole l 4 x 07.3mm Fixing holes No. AROP430 wgt. 0.54kg l Size: W125 x L150mm l Recess: W70 x L134 x D21mm l Complete with spring loaded ring l 6 x 07.3mm Fixing holes 132 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603

Commercial Body Fittings 8th Edition Pivotal / Recessed lashing rings No. AROP340 wgt. 0.83kg l Complete unit includes: 1 x Swivel ring 1 x Pan 2 x Seal plates 1 x Rubber seal l Size: 0152mm l Recess: 0140 x D18mm l Universally jointed to withstand loads enforced in any direction l Permissible Tensile Load: 2000kg (2.0T) No. AROP340/R wgt. 0.38kg FITTING INSTRUCTIONS Ø10 Swivel ring only 1. Weld pivotal ring sub-assembly to trailer cross member. Weld must be totally around retainer dish 2. Router hole in timber floor to suit pan 3. Fit rubber seal over ring, then place pan over ring and fit rubber seal into hole in pan 4. Screw pan to timber floor 5. Place seal plates around ring, covering rubber seal and tack weld at 4 equal positions around outside diameter of seal plate. Swivel Ring Seal Plates Pan Self Colour Dish Complete Unit Ø9 Rubber Seal Weld Weld! Must be welded around total circumference of dish 11 x 11 9 x 9 No. AROP665/GV wgt. 0.31kg l Complete unit includes: 1 x Ring 1 x Pan 1 x Cleat l Size: 0103 x D18mm l Recess: 0 x D16mm l Fully recessed, ideal for cross member attachment l Permissible Tensile Load: 500kg (0.5T) l High-Tensile bolts required in all applications No. AROP9096/2500SC wgt. 0.89kg l Size: W96 x L90 x D28mm l Permissible Tensile Load: 2500kg (2.5T) l Drain hole in base l Weld-on No. AROP6640 wgt. 0.54kg l Complete unit includes: 1 x Ring 1 x Pan 1 x Cleat 1 x Back plate l Size: W100 x L145mm l Recess: W76 x L120 x D9mm l Permissible Tensile Load: 750kg (0.75T) l High-Tensile bolts required in all applications Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 133

LASHING RINGS Commercial Body Fittings 8th Edition No Plate / Weld-on Short Plate / Weld-on 8 55 No. AROP357/NP wgt. 0.38kg Long Plate / Weld-on No. AROP357/SP wgt. 0.55kg Long Plate / Bolt-on 100 100 No. AROP357/LP wgt. 0.65kg & Cleat Bolt-on, No. AROP357/LP/DGV wgt. 0.64kg l Bracket: l Ring: l 2 x 010.5mm Fixing holes Ring Only 82 50 No. AROP357/BOGV wgt. 0.37kg l Bracket: l Ring: l 2 x 010.5mm Fixing holes No. AROP357/R wgt. 0.24kg 134 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603

Commercial Body Fittings 8th Edition LASHING RINGS Underfloor / Gold Passivation Finish 107 Ø15.5 51 64 Ø11.5 20⁰ 20 43 65 90 No. AROP2525 wgt. 0.41kg l Supplied complete with nyloc nuts & backplate l Suits both rave & single claw hooks l Permissible Tensile Load: 1250kg (1.25T) & Cleat Bolt-on, 57 Side view Pan Fitting with 'D' Ring / Gold Passivate No. AROPCBF250 wgt. 1.08kg l Ring: 15 x 15mm l Permissible Tensile Load: 3500kg (3.5T) Pan Fitting with 'D' Ring Stainless Steel 92 10.5 x 10.5 89 Ø12.5 No. AROP56/13 wgt. 0.42kg l Bracket: Zinc plated l Permissible Tensile Load: 1500kg (1.5T) No. AROP7190 l Size: 0102mm l Plate trim: Polyurethane l Low profile mounting in trucks or cargo containers l Ring is designed to stay centred No. AROP7190/R l Ring only No. AROP7190/SS l Size: 0102mm l Plate trim: Polyurethane l Low profile mounting in trucks or cargo containers l Ring is designed to stay centred No. AROP7190/RSS l Ring only Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 135

lashing rings Commercial Body Fittings 8th Edition Stainless Steel & Rocking Staple No. AROP3473 wgt. 0.17kg No. AROP3473 /SS wgt. 0.17kg l Plate: L50 x W40mm l Ring: 065 x 08mm l 4 x 05mm Fixing holes Staple Cast Steel Zinc plated Stainless steel No. AROP4574 wgt. 0.12kg l Plate: L74 x W45mm l Ring: 070 x 07mm l 4 x 05mm Fixing holes Welded Ring No. AROP3309/55 wgt. 0.04kg l Ring: L55 x W34 x 06mm l Staple: L50 x W20 l 2 x 06mm Fixing holes Welded Ring Self Colour A No. MISC69/30 wgt. 0.02kg No. MISC69/40 wgt. 0.03kg No. MISC69/50 wgt. 0.04kg l Black epoxy coated l 05.5mm Fixing holes A=30mm A=40mm A=50mm No. CARG15013/10 wgt. 0.10kg l Material: 08.3mm l Ring ID: 075mm l Suits curtain sided centre pole No. AMSC279/50 wgt. 0.10kg l Material: 09.5mm l Ring ID: 050mm 136 Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603

Commercial Body Fittings 8th Edition LASHING RINGS High Tensile Steel / Yellow Painted Ring Ø25 92 012.5 150 40 53 65 82 100 AFER25/12000/WOSC 130 74 AFER25/12000/BOGV AFER25/12000/YEL No. AFER25/12000/YEL wgt. 1.44kg Cleat Options No. AFER25/12000/BOGV wgt. 0.97kg No. AFER25/12000/WOSC wgt. 0.45kg High Tensile Steel Lashing link ring, yellow painted Lashing link cleat, bolt-on, galvanized Lashing link cleat, weld-on, self colour l Conforms to EN29367-2, lashing & securing arrangements on road vehicles for transportation on RO/RO ships (general requirements) l Permissible Tensile Load: 12000kg (12.0T) (AFER25/12000/BOGV) High Tensile Steel EN29367-2 CRITERIA abbreviated version Each lashing point shall allow the free passage inside it of a circle of at least 080mm, but the aperture need not be circular. The thickness of the lashing point material shall allow engagement of a hook of at least 25mm opening. For hinged or swivelling lashing points, dimension d may exceed 25mm. The value of the test force to be used is 120kN. High Tensile Steel 120 115 115 125 141 50 75 20 99 113 60 75 75 124 60 75 75 No. AFER22/5000SC wgt. 1.20kg Ø20 Ø25 l Material: W20 x D23mm No. AFER22/CLEAT wgt. 0.50kg l Permissible Tensile Load: 5000kg (5.0T) No. AFER20/2000SC wgt. 1.15kg l Material: 020mm l Supplied with weld-on cleat l Permissible Tensile Load: 2000kg (2.0T) No. AFER25/8000SC wgt. 1.59kg l Material: 025mm l Supplied with weld-on cleat l Permissible Tensile Load: 8000kg (8.0T) Welwyn Garden City tel +44 (0)1707 371161 fax +44 (0)1707 372603 137