Metallized polyester film capacitors MKT 370/37/372/373 MKT RADIAL POTTED CAPACITORS PITCH /7.///22./27. mm 2222 370 2222 37 2222 372 2222 373 CBA Fig. Simplified outlines. FEATURES Low-inductive wound cell of metallized (PETP) film Potted with epoxy resin in a blue flame-retardant case Radial leads of solder-coated wire Withstands solvents and rinsing liquids Small stand-off pips to allow removal of solder flux Suitable for high density packaging. QUICK REFERENCE DATA DESCRIPTION VALUE Capacitance range (E2 series) 0.00 to µf Capacitance tolerance ±%; ±% Rated (DC) voltage 63 V; 0 V; 20 V; 400 V Climatic category /0/6 Maximum application temperature 0 C Rated temperature 8 C Tangent of loss angle at khz 0 4 Reference specification IEC 60384-2 Performance grade grade (long life) APPLICATIONS Blocking and coupling Bypass and energy reservoir. DETAIL SPECIFICATION For more detailed data and test requirements see Type detail specification HQN-384-02/3. 999 Apr 29 47
Metallized polyester film capacitors MKT 370 COMPOSITION OF CATALOGUE NUMBER TYPE AND PITCHES 370.08 mm CAPACITANCE (numerically) MULTIPLIER (nf) 0. 2 3 4 0 2222 370 XX XX X Example: 4 = = 0 nf TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V 0 V 20 V 400 V ±% 2 4 lead length 4.0 mm ±% 2 22 42 2 loose in box ±% 2 4 lead length 26.0 mm ±% 6 26 46 6 370 ±% 8 28 48 8 taped on reel H = 8. mm; P 0 = 2.7 mm ±% 9 29 49 9 ±% 7 8 3 6 ammopack H = 8. mm; P 0 = 2.7 mm ±% 76 86 36 66 999 Apr 29 48
Metallized polyester film capacitors MKT 37/372/373 TYPE AND PITCHES 37 7. mm 372.0 mm.0 mm 373 22. mm 27. mm CAPACITANCE (numerically) MULTIPLIER (nf) 0. 2 3 4 0 Example: 4 = = 0 nf 2222 37. XX XX X TYPE PACKAGING LEAD CONFIGURATION C-TOL 63 V 0 V 20 V 400 V ±% 2 4 lead length 4.0 mm ±% 2 22 42 2 loose in box ±% 2 4 lead length 26.0 mm ±% 6 26 46 6 37 ±% 3 6 7 8 taped on reel H = 8. mm; P 0 = 2.7 mm ±% 36 66 76 86 ammopack H = 8. mm; P 0 = 2.7 mm ±% 38 68 78 88 ±% 39 69 79 89 loose in box lead length 4.0 mm ±% 2 4 ±% 22 42 2 372 taped on reel H = 8. mm; P 0 = 2.7 mm ±% 2 4 ±% 26 46 6 ammopack H = 8. mm; P 0 = 2.7 mm ±% 28 48 8 ±% 29 49 9 373 loose in box lead length.0 mm ±% 23 43 3 ±% 24 44 4 taped on reel H = 8. mm; P 0 = 2.7 mm ±% 27 47 7 ±% 28 48 8 999 Apr 29 49
Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH mm l b h l t P d t CBA2 Fig.4 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C. µf 7 4 30 4 Rated voltage pulse slope (du/dt) R at 63 V (DC) 60 V/µs R between leads, for C 0.33 µf at V; minute >000 MΩ RC between leads, for C > 0.33 µf at V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 0 V; minute Withstanding (DC) voltage between leads and case 200 V; minute Available 63 V DC versions PACKAGING () DIMENSIONS C-tol Ammopack H = 8. mm; note 2 Loose in box l t = 4.0 +.0/ 0. mm l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 370 7... preferred ±% 2222 370 76... preferred ±% 2222 370... on request ±% 2222 370 2... on request ±% 2222 370... on request ±% 2222 370 6... on request ±% 2222 370 8... on request ±% 2222 370 9... on request 999 Apr 29 0
Metallized polyester film capacitors MKT 370 U Rdc = 63 V; U Rac = 40 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) AMMOPACK H = 8. mm C-tol =±% C-tol =±% catalogue number () last digits () Pitch =.08 ±0.30 mm; d t = 0.0 ±0.0 mm 0.06 2222 370 763.. 7663 0.068 2222 370 7683.. 76683 0.082 2222 370 7823.. 76823 0. 2. 6. 7.2 0.2 2222 370 74.. 764 0.2 2222 370 724.. 7624 0. 2222 370 74.. 764 0.8 2222 370 784.. 7684 0.22 2222 370 7224.. 76224 0.27 2222 370 7274.. 76274 0.33 3. 8.0 7.2 0.3 2222 370 7334.. 76334 0.39 2222 370 7394.. 76394 0.47 2222 370 7474.. 76474 0.6 2222 370 764.. 7664 4. 9.0 7.2 0.4 0.68 2222 370 7684.. 76684 0.82 2222 370 7824.. 76824 2222 370 7.. 76 6.0.0 7.2 0.60.2 (2) 2222 370 72.. 762. (2) 2222 370 7.. 76 Notes. The shading indicates preferred types. 2. For C =.2 µf and C =. µf: U Rdc = 0 V and U Rac = 32 V. 999 Apr 29
Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH mm l b h l t P d t CBA2 Fig. Outline. Specific reference data for the 0 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 Rated voltage pulse slope (du/dt) R at 0 V (DC) V/µs R between leads, for C 0.33 µf at 0 V; minute >000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 60 V; minute Withstanding (DC) voltage between leads and case 200 V; minute Available 0 V DC versions PACKAGING () DIMENSIONS C-tol Ammopack H = 8. mm; note 2 Loose in box l t = 4.0 +.0/ 0. mm l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 370 8... preferred ±% 2222 370 86... preferred ±% 2222 370 2... on request ±% 2222 370 22... on request ±% 2222 370 2... on request ±% 2222 370 26... on request ±% 2222 370 28... on request ±% 2222 370 29... on request 999 Apr 29 2
Metallized polyester film capacitors MKT 370 U Rdc = 0 V; U Rac = 63 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) AMMOPACK H = 8. mm C-tol =±% C-tol =±% catalogue number () last digits () Pitch =.08 ±0.30 mm; d t = 0.0 ±0.0 mm 0.02 2222 370 823.. 8623 0.0 2222 370 83.. 863 0.08 2222 370 883.. 8683 0.022 2222 370 8223.. 86223 0.027 2222 370 8273.. 86273 0.033 2. 6. 7.2 0.2 2222 370 8333.. 86333 0.039 2222 370 8393.. 86393 0.047 2222 370 8473.. 86473 0.06 2222 370 863.. 8663 0.068 2222 370 8683.. 86683 0.082 2222 370 8823.. 86823 0. 2222 370 84.. 864 0.2 2222 370 824.. 8624 3. 8.0 7.2 0.3 0. 2222 370 84.. 864 0.8 2222 370 884.. 8684 0.22 2222 370 8224.. 86224 0.27 4. 9.0 7.2 0.4 2222 370 8274.. 86274 0.33 2222 370 8334.. 86334 0.39 2222 370 8394.. 86394 6.0.0 7.2 0.6 0.47 2222 370 8474.. 86474 Note. The shading indicates preferred types. 999 Apr 29 3
Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH mm l b h l t P d t CBA2 Fig.6 Outline. Specific reference data for the 20 V DC capacitors VALUE DESCRIPTION at khz at khz at 0 khz Tangent of loss angle 7 4 30 4 20 4 Rated voltage pulse slope (du/dt) R at 20 V (DC) R between leads at 0 V; minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current ma); rise time 0 V/s Withstanding (DC) voltage between leads and case Available 20 V DC versions PACKAGING () DIMENSIONS C-tol Ammopack H = 8. mm; note 2 Loose in box l t = 4.0 +.0/ 0. mm l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 330 V/µs >30000 MΩ >30000 MΩ 400 V; minute 00 V; minute FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 370 3... preferred ±% 2222 370 36... preferred ±% 2222 370 4... on request ±% 2222 370 42... on request ±% 2222 370 4... on request ±% 2222 370 46... on request ±% 2222 370 48... on request ±% 2222 370 49... on request 999 Apr 29 4
Metallized polyester film capacitors MKT 370 U Rdc = 20 V; U Rac = 60 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) AMMOPACK H = 8. mm C-tol =±% C-tol =±% catalogue number () last digits () Pitch =.08 ±0.30 mm; d t = 0.0 ±0.0 mm 0.0039 2222 370 3392.. 36392 0.0047 2222 370 3472.. 36472 0.006 2222 370 362.. 3662 0.0068 2222 370 3682.. 36682 0.0082 2. 6. 7.2 0.2 2222 370 3822.. 36822 0.0 2222 370 33.. 363 0.02 2222 370 323.. 3623 0.0 2222 370 33.. 363 0.08 2222 370 383.. 3683 0.022 2222 370 3223.. 36223 0.027 3. 8.0 7.2 0.3 2222 370 3273.. 36273 0.033 2222 370 3333.. 36333 0.039 2222 370 3393.. 36393 0.047 4. 9.0 7.2 0.4 2222 370 3473.. 36473 0.06 2222 370 363.. 3663 0.068 2222 370 3683.. 36683 0.082 6.0.0 7.2 0.60 2222 370 3823.. 36823 0. 2222 370 34.. 364 Note. The shading indicates preferred types. 999 Apr 29
Metallized polyester film capacitors MKT 370 MKT 370 GENERAL DATA PITCH mm l b h l t P d t CBA2 Fig.7 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at khz at khz at 0 khz Tangent of loss angle 7 4 30 4 20 4 Rated voltage pulse slope (du/dt) R at 400 V (DC) R between leads at 0 V; minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current ma); rise time 0 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING () DIMENSIONS C-tol Ammopack H = 8. mm; note 2 Loose in box l t = 4.0 +.0/ 0. mm l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 630 V/µs >30000 MΩ >30000 MΩ 640 V; minute 800 V; minute FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 370 6... preferred ±% 2222 370 66... preferred ±% 2222 370... on request ±% 2222 370 2... on request ±% 2222 370... on request ±% 2222 370 6... on request ±% 2222 370 8... on request ±% 2222 370 9... on request 999 Apr 29 6
Metallized polyester film capacitors MKT 370 U Rdc = 400 V; U Rac = 220 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) AMMOPACK H = 8. mm C-tol =±% C-tol =±% catalogue number () last digits () Pitch =.08 ±0.30 mm; d t = 0.0 ±0.0 mm 0.00 2222 370 62.. 662 0.002 2222 370 622.. 6622 0.00 2222 370 62.. 662 0.008 2222 370 682.. 6682 0.0022 2222 370 6222.. 66222 0.0027 2222 370 6272.. 66272 2. 6. 7.2 0.2 0.0033 2222 370 6332.. 66332 0.0039 2222 370 6392.. 66392 0.0047 2222 370 6472.. 66472 0.006 2222 370 662.. 6662 0.0068 2222 370 6682.. 66682 0.0082 2222 370 6822.. 66822 0.0 2222 370 63.. 663 0.02 3. 8.0 7.2 0.3 2222 370 623.. 6623 0.0 2222 370 63.. 663 0.08 2222 370 683.. 6683 0.022 4. 9.0 7.2 0.4 2222 370 6223.. 66223 0.027 2222 370 6273.. 66273 0.033 2222 370 6333.. 66333 0.039 6.0.0 7.2 0.60 2222 370 6393.. 66393 0.047 2222 370 6473.. 66473 Note. The shading indicates preferred types. 999 Apr 29 7
Metallized polyester film capacitors MKT 37 MKT 37 GENERAL DATA PITCH 7.mm l b full pagewidth h lt P d t CBA3 Fig.8 Outline. Specific reference data for the 63 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C.0 µf 7 4 30 4 Rated voltage pulse slope (du/dt) R at 63 V (DC) 8 V/µs R between leads, for C 0.33 µf at V; minute >000 MΩ RC between leads, for C > 0.33 µf at V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 0 V; minute Withstanding (DC) voltage between leads and case 200 V; minute Available 63 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t = 4.0 +.0/ 0. mm Ammopack H = 8. mm; note 2 Loose in box l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 37... preferred ±% 2222 37 2... preferred ±% 2222 37 38... preferred ±% 2222 37 39... preferred ±% 2222 37... on request ±% 2222 37 6... on request ±% 2222 37 3... on request ±% 2222 37 36... on request 999 Apr 29 8
Metallized polyester film capacitors MKT 37 U Rdc = 63 V; U Rac = 40 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX AMMOPACK l t = 4.0 +.0/ 0. mm H = 8. mm C-tol =±% C-tol =±% C-tol =±% C-tol =±% catalogue number () last digits () last digits () Pitch = 7.62 +0.30/ 0.40 mm; d t = 0.0 ±0.0 mm 0.06 2222 37 63.. 263.. 3863.. 3963 0.068 2222 37 683.. 2683.. 38683.. 39683 2. 6..0 0.3 0.082 2222 37 823.. 2823.. 38823.. 39823 0. 2222 37 4.. 24.. 384.. 394 0.2 2222 37 24.. 224.. 3824.. 3924 0. 2222 37 4.. 24.. 384.. 394 3.0 8.0.0 0.4 0.8 2222 37 84.. 284.. 3884.. 3984 0.22 2222 37 224.. 2224.. 38224.. 39224 0.27 2222 37 274.. 2274.. 38274.. 39274 0.33 2222 37 334.. 2334.. 38334.. 39334 0.39 2222 37 394.. 2394.. 38394.. 39394 4.0 9.0.0 0. 0.47 2222 37 474.. 2474.. 38474.. 39474 0.6 2222 37 64.. 264.. 3864.. 3964 0.68 2222 37 684.. 2684.. 38684.. 39684 0.82 2222 37 824.. 2824.. 38824.. 39824.0..0 0.7.0 2222 37.. 2.. 38.. 39 Note. The shading indicates preferred types. 999 Apr 29 9
Metallized polyester film capacitors MKT 37 MKT 37 GENERAL DATA PITCH 7. mm l b h lt P d t CBA3 Fig.9 Outline. Specific reference data for the 0 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 Rated voltage pulse slope (du/dt) R at 0 V (DC) 36 V/µs R between leads, for C 0.33 µf at 0 V; minute >000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 60 V; minute Withstanding (DC) voltage between leads and case 200 V; minute Available 0 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t = 4.0 +.0/ 0. mm Ammopack H = 8. mm; note 2 Loose in box l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 37 2... preferred ±% 2222 37 22... preferred ±% 2222 37 68... preferred ±% 2222 37 69... preferred ±% 2222 37 2... on request ±% 2222 37 26... on request ±% 2222 37 6... on request ±% 2222 37 66... on request 999 Apr 29 60
Metallized polyester film capacitors MKT 37 U Rdc = 0 V; U Rac = 63 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX AMMOPACK l t = 4.0 +.0/ 0. mm H = 8. mm C-tol =±% C-tol =±% C-tol =±% C-tol =±% catalogue number () last digits () last digits () Pitch = 7.62 +0.30/ 0.40 mm; d t = 0.0 ±0.0 mm 0.08 2222 37 283.. 2283.. 6883.. 6983 0.022 2222 37 2223.. 22223.. 68223.. 69223 0.027 2222 37 2273.. 22273.. 68273.. 69273 2. 6..0 0.3 0.033 2222 37 2333.. 22333.. 68333.. 69333 0.039 2222 37 2393.. 22393.. 68393.. 69393 0.047 2222 37 2473.. 22473.. 68473.. 69473 0.06 2222 37 263.. 2263.. 6863.. 6963 0.068 2222 37 2683.. 22683.. 68683.. 69683 3.0 8.0.0 0.4 0.082 2222 37 2823.. 22823.. 68823.. 69823 0. 2222 37 24.. 224.. 684.. 694 0.2 2222 37 224.. 2224.. 6824.. 6924 0. 2222 37 24.. 224.. 684.. 694 4.0 9.0.0 0. 0.8 2222 37 284.. 2284.. 6884.. 6984 0.22 2222 37 2224.. 22224.. 68224.. 69224 0.27 2222 37 2274.. 22274.. 68274.. 69274 0.33 2222 37 2334.. 22334.. 68334.. 69334.0..0 0.7 0.39 2222 37 2394.. 22394.. 68394.. 69394 0.47 2222 37 2474.. 22474.. 68474.. 69474 Note. The shading indicates preferred types. 999 Apr 29 6
Metallized polyester film capacitors MKT 37 MKT 37 GENERAL DATA PITCH 7. mm l b h lt P d t CBA3 Fig. Outline. Specific reference data for the 20 V DC capacitors VALUE DESCRIPTION at khz at khz at 0 khz Tangent of loss angle 7 4 30 4 20 4 Rated voltage pulse slope (du/dt) R at 20 V (DC) R between leads at 0 V; minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current ma); rise time 0 V/s Withstanding (DC) voltage between leads and case Available 20 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t = 4.0 +.0/ 0. mm Ammopack H = 8. mm; note 2 Loose in box l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 70 V/µs >30000 MΩ >30000 MΩ 400 V; minute 00 V; minute FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 37 4... preferred ±% 2222 37 42... preferred ±% 2222 37 78... preferred ±% 2222 37 79... preferred ±% 2222 37 4... on request ±% 2222 37 46... on request ±% 2222 37 7... on request ±% 2222 37 76... on request 999 Apr 29 62
Metallized polyester film capacitors MKT 37 U Rdc = 20 V; U Rac = 60 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX AMMOPACK l t = 4.0 +.0/ 0. mm H = 8. mm C-tol =±% C-tol =±% C-tol =±% C-tol =±% catalogue number () last digits () last digits () Pitch = 7.62 +0.30/ 0.40 mm; d t = 0.0 ±0.0 mm 0.0082 2222 37 4822.. 42822.. 78822.. 79822 0.0 2222 37 43.. 423.. 783.. 793 2. 6..0 0.3 0.02 2222 37 423.. 4223.. 7823.. 7923 0.0 2222 37 43.. 423.. 783.. 793 0.08 2222 37 483.. 4283.. 7883.. 7983 0.022 2222 37 4223.. 42223.. 78223.. 79223 0.027 2222 37 4273.. 42273.. 78273.. 79273 3.0 8.0.0 0.4 0.033 2222 37 4333.. 42333.. 78333.. 79333 0.039 2222 37 4393.. 42393.. 78393.. 79393 0.047 2222 37 4473.. 42473.. 78473.. 79473 0.06 2222 37 463.. 4263.. 7863.. 7963 0.068 2222 37 4683.. 42683.. 78683.. 79683 4.0 9.0.0 0. 0.082 2222 37 4823.. 42823.. 78823.. 79823 0. 2222 37 44.. 424.. 784.. 794 Note. The shading indicates preferred types. 999 Apr 29 63
Metallized polyester film capacitors MKT 37 MKT 37 GENERAL DATA PITCH 7. mm l b full pagewidth h lt P Fig. Outline. d t CBA3 Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at khz at khz at 0 khz Tangent of loss angle 7 4 30 4 20 4 Rated voltage pulse slope (du/dt) R at 400 V (DC) R between leads at 0 V; minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current ma); rise time 0 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t = 4.0 +.0/ 0. mm Ammopack H = 8. mm; note 2 Loose in box l t = 26.0 ±2.0 mm Taped on reel H = 8. mm; note 2 90 V/µs >30000 MΩ >30000 MΩ 640 V; minute 800 V; minute FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 37... preferred ±% 2222 37 2... preferred ±% 2222 37 88... preferred ±% 2222 37 89... preferred ±% 2222 37... on request ±% 2222 37 6... on request ±% 2222 37 8... on request ±% 2222 37 86... on request 999 Apr 29 64
Metallized polyester film capacitors MKT 37 U Rdc = 400 V; U Rac = 220 V CATALOGUE NUMBER C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX AMMOPACK l t = 4.0 +.0/ 0. mm H = 8. mm C-tol =±% C-tol =±% C-tol =±% C-tol =±% catalogue number () last digits () last digits () Pitch = 7.62 +0.30/ 0.40 mm; d t = 0.0 ±0.0 mm 0.0039 2222 37 392.. 2392.. 88392.. 89392 0.0047 2222 37 472.. 2472.. 88472.. 89472 2. 6..0 0.3 0.006 2222 37 62.. 262.. 8862.. 8962 0.0068 2222 37 682.. 2682.. 88682.. 89682 0.0082 2222 37 822.. 2822.. 88822.. 89822 3.0 8.0.0 0.4 0.0 2222 37 3.. 23.. 883.. 893 0.02 2222 37 23.. 223.. 8823.. 8923 4.0 9.0.0 0. 0.0 2222 37 3.. 23.. 883.. 893 Note. The shading indicates preferred types. 999 Apr 29 6
Metallized polyester film capacitors MKT 372 MKT 372 GENERAL DATA PITCH mm l b h l t P d t CBA4 Fig.2 Outline. Specific reference data for the 0 V DC capacitors VALUE DESCRIPTION at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 Rated voltage pulse slope (du/dt) R at 0 V (DC) R between leads, for C 0.33 µf at 0 V; minute RC between leads, for C > 0.33 µf at 0 V; minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current ma); rise time 0 V/s Withstanding (DC) voltage between leads and case Available 0 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t = 4.0 +.0/ 0. mm Taped on reel H = 8. mm; note 2 Ammopack H = 8. mm; note 2 34 V/µs >000 MΩ >000 s >30000 MΩ 60 V; minute 200 V; minute FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 372 2... preferred ±% 2222 372 22... on request ±% 2222 372 2... on request ±% 2222 372 26... on request ±% 2222 372 28... on request ±% 2222 372 29... on request 999 Apr 29 66
Metallized polyester film capacitors MKT 372 U Rdc = 0V; U Rac = 63 V CATALOGUE NUMBER () C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX l t = 4.0 +.0/ 0. mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.60 ±0.06 mm 0. 2222 372 24 0.2 2222 372 224 0. 4.0 9.0 2. 0.6 2222 372 24 0.8 2222 372 284 0.22 2222 372 2224 0.27 2222 372 2274 4.0.0 2. 0.7 0.33 2222 372 2334 0.39 2222 372 2394.0.0 2. 0.9 0.47 2222 372 2474 Note. The shading indicates preferred types. 999 Apr 29 67
Metallized polyester film capacitors MKT 372 MKT 372 GENERAL DATA PITCH mm l b h l t P d t CBA4 Fig.3 Outline. Specific reference data for the 20 V DC capacitors VALUE DESCRIPTION at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 Rated voltage pulse slope (du/dt) R at 20 V (DC) R between leads at 0 V; minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current ma); rise time 0 V/s Withstanding (DC) voltage between leads and case Available 20 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t = 4.0 +.0/ 0. mm Taped on reel H = 8. mm; note 2 Ammopack H = 8. mm; note 2 0 V/µs >30000 MΩ >30000 MΩ 400 V; minute 00 V; minute FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 372 4... preferred ±% 2222 372 42... on request ±% 2222 372 4... on request ±% 2222 372 46... on request ±% 2222 372 48... on request ±% 2222 372 49... on request 999 Apr 29 68
Metallized polyester film capacitors MKT 372 U Rdc = 20 V; U Rac = 60 V CATALOGUE NUMBER () C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX l t = 4.0 +.0/ 0. mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.60 ±0.06 mm 0.047 2222 372 4473 0.06 4.0 9.0 2. 0.6 2222 372 463 0.068 2222 372 4683 0.082 2222 372 4823 4.0.0 2. 0.7 0. 2222 372 44 0.2 2222 372 424.0.0 2. 0.9 0. 2222 372 44 Note. The shading indicates preferred types. 999 Apr 29 69
Metallized polyester film capacitors MKT 372 MKT 372 GENERAL DATA PITCH mm l b h l t P d t CBA4 Fig.4 Outline. Specific reference data for the 400 V DC capacitors VALUE DESCRIPTION at khz at khz at 0 khz Tangent of loss angle 7 4 30 4 20 4 Rated voltage pulse slope (du/dt) R at 400 V (DC) R between leads at 0 V; minute R between interconnected leads and case (foil method) Withstanding (DC) voltage (cut off current ma); rise time 0 V/s Withstanding (DC) voltage between leads and case Available 400 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t = 4.0 +.0/ 0. mm Taped on reel H = 8. mm; note 2 Ammopack H = 8. mm; note 2 80 V/µs >30000 MΩ >30000 MΩ 640 V; minute 800 V; minute FIRST 9 DIGITS OF CATALOGUE NUMBER Notes. For SPQ refer to this handbook, chapter Packaging information. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. ORDERING ±% 2222 372... preferred ±% 2222 372 2... on request ±% 2222 372... on request ±% 2222 372 6... on request ±% 2222 372 8... on request ±% 2222 372 9... on request 999 Apr 29 70
Metallized polyester film capacitors MKT 372 U Rdc = 400 V; U Rac = 220 V CATALOGUE NUMBER () C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX l t = 4.0 +.0/ 0. mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.60 ±0.06 mm 0.0047 2222 372 472 0.006 2222 372 62 0.0068 2222 372 682 0.0082 2222 372 822 0.0 4.0 9.0 2. 0.6 2222 372 3 0.02 2222 372 23 0.0 2222 372 3 0.08 2222 372 83 0.022 2222 372 223 0.027 2222 372 273 4.0.0 2. 0.7 0.033 2222 372 333 0.039 2222 372 393.0.0 2. 0.9 0.047 2222 372 473 Note. The shading indicates preferred types. 999 Apr 29 7
Metallized polyester film capacitors MKT 373 MKT 373 GENERAL DATA PITCH /22./27. mm (NEW) l b h l t P d t CBA Fig. Outline. Specific reference data for the 0 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: 0.33 µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C.0 µf 7 4 30 4.0 µf < C µf 7 4 0 4 C > µf 7 4 Rated voltage pulse slope (du/dt) R at 0 V (DC): P = mm 4 V/µs P = 22. mm V/µs P =27. mm 4V/µs R between leads, for C 0.33 µf at 0 V; minute >000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 60 V; minute Withstanding (DC) voltage between leads and case 200 V; minute Available 0 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t =.0 ±.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING ±% 2222 373 23... preferred ±% 2222 373 24... on request ±% 2222 373 27... on request ±% 2222 373 28... on request Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 72
Metallized polyester film capacitors MKT 373 U Rdc = 0 V; U Rac = 63 V (NEW) CATALOGUE NUMBER () C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX l t =.0 ±.0 mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.80 ±0.08 mm 0.33 2222 373 23334 0.39 2222 373 23394 0.47 2222 373 23474 0.6 2222 373 2364 0.68 2222 373 23684.0.0 7.. 0.82 2222 373 23824 2222 373 23.2 2222 373 232. 2222 373 23.8 2222 373 238 2.2 6.0 2.0 7..4 2222 373 2322 2.7 2222 373 2327 7.0 3. 7..9 3.3 2222 373 2333 3.9 2222 373 2339 8..0 7. 2.6 4.7 2222 373 2347.6 2222 373 236.0 6. 7. 3. 6.8 2222 373 2368 Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm 8.2 2222 373 2382 8. 8.0 26.0 4.4 2222 373 236 2.0 9. 26.0. 2222 373 2326 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm.0 2.0 3.0 7.8 2222 373 236 Note. The shading indicates preferred types. 999 Apr 29 73
Metallized polyester film capacitors MKT 373 MKT 373 GENERAL DATA PITCH /22./27. mm (NEW) l b h l t P d t CBA Fig.6 Outline. Specific reference data for the 20 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: 0. µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C.0 µf 7 4 30 4.0 µf < C 4.7 µf 7 4 0 4 Rated voltage pulse slope (du/dt) R at 20 V (DC): P = mm 6 V/µs P = 22. mm 7V/µs P =27. mm 6V/µs R between leads, for C 0.33 µf at 0 V; minute >30000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 400 V; minute Withstanding (DC) voltage between leads and case 00 V; minute Available 20 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t =.0 ±.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING ±% 2222 373 43... preferred ±% 2222 373 44... on request ±% 2222 373 47... on request ±% 2222 373 48... on request Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 74
Metallized polyester film capacitors MKT 373 U Rdc = 20 V; U Rac = 60 V (NEW) CATALOGUE NUMBER () C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX l t =.0 ±.0 mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.80 ±0.08 mm 0. 2222 373 434 0.8 2222 373 4384 0.22.0.0 7.. 2222 373 43224 0.27 2222 373 43274 0.33 2222 373 43334 0.39 2222 373 43394 6.0 2.0 7..4 0.47 2222 373 43474 0.6 2222 373 4364 7.0 3. 7..9 0.68 2222 373 43684 0.82 2222 373 43824 8..0 7. 2.6.0 2222 373 43.2.0 6. 7. 3. 2222 373 432 Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm. 2222 373 43 8. 8.0 26.0 4.4.8 2222 373 438 2.2 2222 373 4322.0 9. 26.0. 2.7 2222 373 4327 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm 3.3.0 2.0 3.0 7.8 2222 373 4333 3.9 2222 373 4339 3.0 23.0 3.0.4 4.7 2222 373 4347 Note. The shading indicates preferred types. 999 Apr 29 7
Metallized polyester film capacitors MKT 373 MKT 373 GENERAL DATA PITCH /22./27. mm (NEW) l b h l t P d t CBA Fig.7 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C.0 µf 7 4 30 4.0 µf < C. µf 7 4 0 4 Rated voltage pulse slope (du/dt) R at 400 V (DC): P = mm 34 V/µs P = 22. mm 4 V/µs P = 27. mm 2 V/µs R between leads, for C 0.33 µf at 0 V; minute >30000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 640 V; minute Withstanding (DC) voltage between leads and case 800 V; minute Available 400 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t =.0 ±.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING ±% 2222 373 3... preferred ±% 2222 373 4... on request ±% 2222 373 7... on request ±% 2222 373 8... on request Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 76
Metallized polyester film capacitors MKT 373 U Rdc = 400 V; U Rac = 220 V (NEW) CATALOGUE NUMBER () C (µf) DIMENSIONS b h l (mm) MASS (g) LOOSE IN BOX l t =.0 ±.0 mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.80 ±0.08 mm 0.047 2222 373 3473 0.06 2222 373 363 0.068 2222 373 3683 0.082.0.0 7.. 2222 373 3823 0. 2222 373 34 0.2 2222 373 324 0. 2222 373 34 0.8 2222 373 384 6.0 2.0 7..4 0.22 2222 373 3224 0.27 2222 373 3274 7.0 3. 7..9 0.33 2222 373 3334 0.39 2222 373 3394 8..0 7. 2.6 0.47 2222 373 3474 0.6.0 6. 7. 3.2 2222 373 364 Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm 0.68 2222 373 3684 8. 8.0 26.0 4.4 0.82 2222 373 3824 2222 373 3.0 9. 26.0..2 2222 373 32 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm..0 2.0 3.0 7.8 2222 373 3 Note. The shading indicates preferred types. 999 Apr 29 77
Metallized polyester film capacitors MKT 373 MKT 373 GENERAL DATA PITCH /22./27. mm (MAINTENANCE) l b h l t P d t CBA Fig.8 Outline. Specific reference data for the 0 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: 0.33 µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C.0 µf 7 4 30 4.0 µf < C µf 7 4 0 4 C > µf 7 4 Rated voltage pulse slope (du/dt) R at 0 V (DC): P = mm 4 V/µs P = 22. mm V/µs P =27. mm 4V/µs R between leads, for C 0.33 µf at 0 V; minute >000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 60 V; minute Withstanding (DC) voltage between leads and case 200 V; minute Available 0 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t =.0 ±.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING ±% 2222 373 2... on request ±% 2222 373 22... on request ±% 2222 373 2... on request ±% 2222 373 26... on request Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 78
Metallized polyester film capacitors MKT 373 U Rdc = 0 V; U Rac = 63 V (MAINTENANCE) CATALOGUE NUMBER DIMENSIONS C MASS LOOSE IN BOX b h l (µf) (g) (mm) l t =.0 ±.0 mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.80 ±0.08 mm 0.33 2222 373 2334 0.39 2222 373 2394 0.47.0.0 7.. 2222 373 2474 0.6 2222 373 264 0.68 2222 373 2684 0.82 2222 373 2824 6.0 2.0 7..4 2222 373 2.2 2222 373 22 7.0 3. 7..9. 2222 373 2.8 2222 373 28 8..0 7. 2.6 2.2 2222 373 222 Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm 2.7 2222 373 227 8. 8.0 26.0 4.4 3.3 2222 373 233 3.9 2222 373 239.0 9. 26.0. 4.7 2222 373 247 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm.6 2222 373 26.0 2.0 3.0 8.0 6.8 2222 373 268 8.2 2222 373 282 3.0 23.0 3.0. 2222 373 26 2 2222 373 226 8.0 28.0 3.0 7. 2222 373 26 Available on request CATALOGUE NUMBER DIMENSIONS C MASS loose in box; l t =.0 ±.0 mm () taped on reel; H = 8. mm ()(2) b h l (µf) (g) (mm) C-tol =±% C-tol =±% C-tol =±% C-tol =±% catalogue number last digits last digits Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm. 6.0. 26.0 2. 2222 373 9002.. 9003.. 9008.. 9009.8 2222 373 90022.. 90023.. 90028.. 90029 7.0 6. 26.0 3.2 2.2 2222 373 90002.. 90003.. 90008.. 90009 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm 4.7 9.0 9.0 3.0.8 2222 373 90032.. 90033 not available Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 79
Metallized polyester film capacitors MKT 373 MKT 373 GENERAL DATA PITCH /22./27. mm (MAINTENANCE) l b h l t P d t CBA Fig.9 Outline. Specific reference data for the 20 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: 0. µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C.0 µf 7 4 30 4.0 µf < C 4.7 µf 7 4 0 4 Rated voltage pulse slope (du/dt) R at 20 V (DC): P = mm 6 V/µs P = 22. mm 7V/µs P =27. mm 6V/µs R between leads, for C 0.33 µf at 0 V; minute >30000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 400 V; minute Withstanding (DC) voltage between leads and case 00 V; minute Available 20 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t =.0 ±.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING ±% 2222 373 4... on request ±% 2222 373 42... on request ±% 2222 373 4... on request ±% 2222 373 46... on request Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 80
Metallized polyester film capacitors MKT 373 U Rdc = 20 V; U Rac = 60 V CATALOGUE NUMBER DIMENSIONS C MASS LOOSE IN BOX b h l (µf) (g) (mm) l t =.0 ±.0 mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.80 ±0.08 mm 0. 2222 373 44 0.8.0.0 7.. 2222 373 484 0.22 2222 373 4224 0.27 2222 373 4274 0.33 2222 373 4334 6.0 2.0 7..4 0.39 2222 373 4394 0.47 2222 373 4474 0.6 2222 373 464 7.0 3. 7..9 0.68 2222 373 4684 0.82 2222 373 4824 8..0 7. 2.6.0 2222 373 4 Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm.2 2222 373 42 8. 8.0 26.0 4.4. 2222 373 4.8 2222 373 48.0 9. 26.0. 2.2 2222 373 422 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm 2.7 2222 373 427 3.0 23.0 3.0.4 3.3 2222 373 433 3.9 2222 373 439.0 2.0 3.0 2. 4.7 2222 373 447 (MAINTENANCE) Available on request CATALOGUE NUMBER DIMENSIONS C MASS loose in box; l t =.0 ±.0 mm () taped on reel; H = 8. mm ()(2) b h l (µf) (g) (mm) C-tol =±% C-tol =±% C-tol =±% C-tol =±% catalogue number last digits last digits Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm 0.47 2222 373 90042.. 90043.. 90048.. 90049 0.6 6.0. 26.0 2. 2222 373 9002.. 9003.. 9008.. 9009 0.68 2222 373 90062.. 90063.. 90068.. 90069 0.82 2222 373 90072.. 90073.. 90078.. 90079 7.0 6. 26.0 3.2 2222 373 90082.. 90083.. 90088.. 90089 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm.2 2222 373 9072.. 9073 9.0 9.0 3.0.8. 2222 373 90092.. 90093.8 2222 373 902.. 903.0 2.0 3.0 7.8 2.2 2222 373 902.. 903 not available Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 8
Metallized polyester film capacitors MKT 373 MKT 373 GENERAL DATA PITCH /22./27. mm (MAINTENANCE) l b h l t P d t CBA Fig.20 Outline. Specific reference data for the 400 V DC capacitors DESCRIPTION VALUE at khz at khz at 0 khz Tangent of loss angle: C 0. µf 7 4 30 4 20 4 0. µf < C 0.47 µf 7 4 30 4 300 4 0.47 µf < C.0 µf 7 4 30 4.0 µf < C. µf 7 4 0 4 Rated voltage pulse slope (du/dt) R at 400 V (DC): P = mm 34 V/µs P = 22. mm 4 V/µs P = 27. mm 2 V/µs R between leads, for C 0.33 µf at 0 V; minute >30000 MΩ RC between leads, for C > 0.33 µf at 0 V; minute >000 s R between interconnected leads and case (foil method) >30000 MΩ Withstanding (DC) voltage (cut off current ma); rise time 0 V/s 640 V; minute Withstanding (DC) voltage between leads and case 800 V; minute Available 400 V DC versions PACKAGING () DIMENSIONS C-tol Loose in box l t =.0 ±.0 mm Taped on reel H = 8. mm; note 2 FIRST 9 DIGITS OF CATALOGUE NUMBER ORDERING ±% 2222 373... on request ±% 2222 373 2... on request ±% 2222 373... on request ±% 2222 373 6... on request Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 82
Metallized polyester film capacitors MKT 373 U Rdc = 400 V; U Rac = 220 V (MAINTENANCE) CATALOGUE NUMBER DIMENSIONS C MASS LOOSE IN BOX b h l (µf) (g) (mm) l t =.0 ±.0 mm C-tol =±% Pitch =.0 ±0.4 mm; d t = 0.80 ±0.08 mm 0.047 2222 373 473 0.06 2222 373 63 0.068.0.0 7.. 2222 373 683 0.082 2222 373 823 0. 2222 373 4 0.2 2222 373 24 6.0 2.0 7..4 0. 2222 373 4 0.8 2222 373 84 7.0 3. 7..9 0.22 2222 373 224 0.27 2222 373 274 8..0 7. 2.6 0.33 2222 373 334 Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm 0.39 2222 373 394 8. 8.0 26.0 4.4 0.47 2222 373 474 0.6 4.4 2222 373 64.0 9. 26.0 0.68. 2222 373 684 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm 0.82 2222 373 824.0 2.0 3.0 7.8 2222 373.2 2222 373 2.0 2.0 3.0 2.8. 2222 373 Available on request CATALOGUE NUMBER DIMENSIONS C MASS loose in box; l t =.0 ±.0 mm () taped on reel; = 8. mm ()(2) b h l (µf) (g) (mm) C-tol =±% C-tol =±% C-tol =±% C-tol =±% catalogue number last digits last digits Pitch = 22. ±0.4 mm; d t = 0.80 ±0.08 mm 0.22 6.0. 26.0 2. 2222 373 9022.. 9023.. 9028.. 9029 0.27 2222 373 9032.. 9033.. 9038.. 9039 7.0 6. 26.0 3.2 0.33 2222 373 9042.. 9043.. 9048.. 9049 Pitch = 27. ±0.4 mm; d t = 0.80 ±0.08 mm 0.68 9.0 9.0 3.0.8 2222 373 902.. 903 not available Notes. For SPQ refer to this handbook, chapter Packaging information ; taped on reel pitch = 27. mm is not available. 2. H = in-tape height; for detailed specifications refer to this handbook, chapter Packaging information. 999 Apr 29 83
Metallized polyester film capacitors MKT 370/37/372/373 CONSTRUCTION Description Low-inductive wound cell of metallized polyethylene terephthalate (PETP) film, potted with epoxy resin in a blue flame-retardant case Radial leads, solder-coated: Copper clad steel wire (d t = 0. or 0.6 mm) Copper wire (d t = 0.8 mm) Small stand-off pips allow removal of solder flux etc. during cleaning of the printed-circuit board. handbook, halfpage metallized polyester film SPECIFIC METHOD OF MOUNTING TO WITHSTAND VIBRATION AND SHOCK In order to withstand vibration and shock tests, it must be ensured that the stand-off pips are in good contact with the printed-circuit board: For pitches of mm capacitors shall be mechanically fixed by the leads. For larger pitches the capacitors shall be mounted in the same way and the body clamped. SPACE REQUIREMENTS ON PRINTED-CIRCUIT BOARD The maximum length and width of film capacitors is shown in Fig.22: Eccentricity see Fig.22. The maximum eccentricity is smaller than or equal to the wire diameter of the product concerned. Product height with seating plane as given by IEC 6077 as reference: h max h +0.3 mm. metal spray layer handbook, halfpage eccentricity b max = b + 0.3 mm connecting wire CBA073 l max = l + 0.3 mm CBA6 Fig.2 Construction. Fig.22 Lay-out.. Mounting NORMAL USE The capacitors are designed for mounting on printed-circuit boards. The capacitors packed in bandoliers are designed for mounting on printed-circuit boards by automatic insertion machines. For detailed tape specifications refer to this handbook, chapter Packaging information. Storage temperature Storage temperature: T stg = 2 to +40 C with RH maximum 80% without condensation. RATINGS AND CHARACTERISTICS REFERENCE CONDITIONS Unless otherwise specified, all electrical values apply to an ambient free air temperature of 23 ± C, an atmospheric pressure of 86 to 6 kpa and a relative humidity of 0 ±2%. For reference testing, a conditioning period shall be applied over 96 ±4 hours by heating the products in a circulating air oven at the rated temperature and a relative humidity not exceeding 20%. 999 Apr 29 84
Metallized polyester film capacitors MKT 370/37/372/373 CHARACTERISTICS Capacitance 2 C C (%) CBA7 0 2 3 2 3 4 Fig.23 Capacitance change as a function of frequency; typical curve. 6 C C (%) 4 2 a. 63 V, MKT 370; 0.2 to. µf b. 400 V series c. 20 V series d. 0 V series e. 63 V, except MKT 370; 0.2 to. µf CBA932 a 0 max. b 2 4 typical min. c d e 6 60 20 20 60 T amb ( C) 0 Fig.24 Capacitance change at Kz as a function of ambient free air temperature. 999 Apr 29 8
Metallized polyester film capacitors MKT 370/37/372/373 Impedance 2 Impedance (Ω) MKT 370 CBA9 63 V; µf 63 V; 0 nf 20 V; nf 2 3 4 6 7 8 Fig.2 Impedance as a function of frequency; typical curves. Maximum DC and as a function of temperature.2 factor CBA086.0 0.8 0.6 0.4 0.2 0 60 40 20 0 20 40 60 80 0 T amb ( C) Fig.26 Multiplying factor for DC and as a function of temperature. 999 Apr 29 86
Metallized polyester film capacitors MKT 370/37/372/373 Maximum RMS voltage (sinewave) as a function of frequency 2 MKT 370 CBA20 6 nf 0 nf 220 nf 470 nf 00 nf 2 3 4 Fig.27 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 63 V. 2 MKT 370 CBA788 6 nf 0 nf 00 nf 220 nf 470 nf 2 3 4 Fig.28 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 63 V. 999 Apr 29 87
Metallized polyester film capacitors MKT 370/37/372/373 2 MKT 370 CBA2 2 nf 22 nf 47 nf 0 nf 330 nf 2 3 4 Fig.29 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 0 V. 2 MKT 370 CBA789 2 nf 22 nf 47 nf 220 nf 0 nf 330 nf 2 3 4 Fig.30 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 0 V. 999 Apr 29 88
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 370 CBA22 2 4.7 nf nf 22 nf 47 nf 0 nf 2 3 4 Fig.3 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 20 V. 3 MKT 370 CBA790 2 4.7 nf nf 22 nf 47 nf 0 nf 2 3 4 Fig.32 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 20 V. 999 Apr 29 89
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 370 CBA23 2.0 nf 2.2 nf 4.7 nf nf 22 nf 33 nf 2 3 4 Fig.33 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 400 V. 3 MKT 370 CBA79 2.0 nf 2.2 nf 4.7 nf nf 33 nf 2 3 4 Fig.34 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 400 V. 999 Apr 29 90
Metallized polyester film capacitors MKT 370/37/372/373 2 MKT 37 CBA24 0 nf 220 nf 470 nf 00 nf 2 3 4 Fig.3 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 63 V. 2 MKT 37 CBA792 0 nf 220 nf 470 nf 00 nf 2 3 4 Fig.36 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 63 V. 999 Apr 29 9
22 nf 22 nf 47 nf BC Components Metallized polyester film capacitors MKT 370/37/372/373 2 MKT 37 CBA2 47 nf 0 nf 220 nf 470 nf 2 3 4 Fig.37 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 0 V. 2 MKT 37 CBA793 0 nf 220 nf 470 nf 2 3 4 Fig.38 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 0 V. 999 Apr 29 92
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 37 CBA26 2 nf 22 nf 47 nf 0 nf 2 3 4 Fig.39 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 20 V. 3 MKT 37 CBA794 2 nf 22 nf 47 nf 0 nf 2 3 4 Fig.40 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 20 V. 999 Apr 29 93
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 37 CBA27 2 4.7 nf nf 2 3 4 Fig.4 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 400 V. 3 MKT 37 CBA79 2 4.7 nf nf 2 3 4 Fig.42 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 400 V. 999 Apr 29 94
470 nf BC Components Metallized polyester film capacitors MKT 370/37/372/373 2 MKT 372 CBA28 0 nf 220 nf 470 nf 2 3 4 Fig.43 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 0 V. 2 MKT 372 CBA796 0 nf 220 nf 2 3 4 Fig.44 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 0 V. 999 Apr 29 9
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 372 CBA29 2 47 nf 0 nf 2 3 4 Fig.4 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 20 V. 3 MKT 372 CBA797 2 47 nf 0 nf 2 3 4 Fig.46 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 20 V. 999 Apr 29 96
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 372 CBA30 2 4.7 nf nf 22 nf 47 nf 2 3 4 Fig.47 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 400 V. 3 MKT 372 CBA798 2 nf 4.7 nf 22 nf 47 nf 2 3 4 Fig.48 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 400 V. 999 Apr 29 97
Metallized polyester film capacitors MKT 370/37/372/373 2 MKT 373 CBA800 470 nf.0 µf 2.2 µf 4.7 µf µf 2 3 4 Fig.49 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 0 V (2222 373 23...; 24...; 27...; 28... types). 2 MKT 373 CBA80 470 nf.0 µf 2.2 µf 2 3 4 4.7 µf µf Fig.0 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 0 V (2222 373 23...; 24...; 27...; 28... types). 999 Apr 29 98
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 373 CBA803 2 220 nf.0 µf 4.7 µf 2 3 4 Fig. (RMS value) as a function of frequency at T amb 8 C for U Rdc = 20 V (2222 373 43...; 44...; 47...; 48... types). 3 MKT 373 CBA804 2 220 nf.0 µf 2 3 4 4.7 µf Fig.2 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 20 V (2222 373 43...; 44...; 47...; 48... types). 999 Apr 29 99
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 373 CBA806 2 47 nf 0 nf 220 nf. µf 2 3 4 Fig.3 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 400 V (2222 373 3...; 4...; 7...; 8... types). 3 MKT 373 CBA807 2 47 nf 0 nf 220 nf. µf 2 3 4 Fig.4 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 400 V (2222 373 3...; 4...; 7...; 8... types). 999 Apr 29 200
Metallized polyester film capacitors MKT 370/37/372/373 2 MKT 373 CBA3 470 nf.0 µf 2.2 µf 4.7 µf µf 2 3 4 Fig. (RMS value) as a function of frequency at T amb 8 C for U Rdc = 0 V (2222 373 2...; 22...; 2...; 26... types). 2 MKT 373 CBA799 470 nf.0 µf 2.2 µf 4.7 µf µf 2 3 4 Fig.6 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 0 V (2222 373 2...; 22...; 2...; 26... types). 999 Apr 29 20
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 373 CBA32 2 220 nf.0 µf 2.2 µf 6.8 µf 2 3 4 Fig.7 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 20 V (2222 373 4...; 42...; 4...; 46... types). 3 MKT 373 CBA802 2 220 nf.0 µf 2.2 µf 6.8 µf 2 3 4 Fig.8 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 20 V (2222 373 4...; 42...; 4...; 46... types). 999 Apr 29 202
Metallized polyester film capacitors MKT 370/37/372/373 3 MKT 373 CBA33 2 47 nf 0 nf 220 nf.0 µf 2.2 µf 2 3 4 Fig.9 (RMS value) as a function of frequency at T amb 8 C for U Rdc = 400 V (2222 373...; 2...;...; 6... types). 3 MKT 373 CBA80 2 47 nf 0 nf 220 nf. µf 2 3 4 Fig.60 (RMS value) as a function of frequency at 8 C < T amb 0 C for U Rdc = 400 V (2222 373...; 2...;...; 6... types). Maximum RMS current (sinewave) as a function of frequency The maximum RMS current is defined by I ac = ω C U ac. U ac is the maximum depending on the ambient temperature in Figs 27 to 60. 999 Apr 29 203
Metallized polyester film capacitors MKT 370/37/372/373 Tangent of loss angle 3 CBA34 dissipation factor ( 4 ) 2 2 3 4 Fig.6 Tangent of loss angle as a function of frequency; typical curve. Insulation resistance CBA3 RC (s) 4 3 2 0 0 0 T amb ( C) 0 Fig.62 RC product as a function of ambient free air temperature; typical curve. 999 Apr 29 204
Metallized polyester film capacitors MKT 370/37/372/373 Maximum allowed component temperature rise ( T) as a function of the ambient temperature (T amb ) 20 T ( C) CBA840 0 60 40 20 0 20 40 60 80 0 T amb ( C) Fig.63 Maximum allowed component temperature rise as a function of the ambient temperature. Heat conductivity (G) as a function of pitch and capacitor body thickness in mw/ C Table Heat conductivity b max PITCH (mm) (mm) 7. 22. 27. 2. 2. 3 3.0 4 3. 3.0 4.0 6.0 4. 4.0.0 6 7. 6.0. 7 9.0 9 7.0 2 2 8. 6 2.0 8 28.0 36 3.0 42.0 48 8.0 7 Power dissipation and maximum component temperature rise The power dissipation must be limited in order not to exceed the maximum allowed component temperature rise as a function of the free air ambient temperature. Power dissipation can be calculated in accordance with chapter Introduction section, Maximum power dissipation. The component temperature rise ( T) can be measured (see section Measuring the component temperature for more details) or calculated by T = P G: T = component temperature rise ( C). P = power dissipation of the component (mw). G = heat conductivity of the component (mw/ C). 999 Apr 29 20
Metallized polyester film capacitors MKT 370/37/372/373 Measuring the component temperature A thermocouple must be attached to the capacitor body as in Fig.64. handbook, halfpage thermocouple CBA78 Fig.64 Mounting the thermocouple. The temperature is measured in unloaded (T amb ) and maximum loaded condition (T c ). The temperature rise is given by T = T c T amb. To avoid radiation or convection, the capacitor should be tested in a wind-free box. 999 Apr 29 206