Saeed Shojaee. Teaching



Similar documents
In the Name of God, Most Gracious, Most Merciful

METHODS FOR ACHIEVEMENT UNIFORM STRESSES DISTRIBUTION UNDER THE FOUNDATION

AN INTRODUCTION TO NUMERICAL METHODS AND ANALYSIS

FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS

Finite Element Method (ENGC 6321) Syllabus. Second Semester

DESIGN AND ANALYSIS OF BRIDGE WITH TWO ENDS FIXED ON VERTICAL WALL USING FINITE ELEMENT ANALYSIS

Introduction to Solid Modeling Using SolidWorks 2012 SolidWorks Simulation Tutorial Page 1

DYNAMIC RESPONSE OF CONCRETE GRAVITY DAM ON RANDOM SOIL

DEVELOPMENT AND APPLICATIONS OF TUNED/HYBRID MASS DAMPERS USING MULTI-STAGE RUBBER BEARINGS FOR VIBRATION CONTROL OF STRUCTURES

Numerical Analysis An Introduction

Finite Element Formulation for Plates - Handout 3 -

CONTRIBUTION TO THE IAEA SOIL-STRUCTURE INTERACTION KARISMA BENCHMARK

SEISMIC RETROFITTING OF STRUCTURES

Materials All chemicals except those otherwise indicated were purchased from Sigma-Aldrich Company (St. Louis, MO, USA).

Course in. Nonlinear FEM

A Comparative study on organizational positions of health management and information technology department of hospitals and proposing a model for Iran

Graduate Courses in Mechanical Engineering

STUDY OF DAM-RESERVOIR DYNAMIC INTERACTION USING VIBRATION TESTS ON A PHYSICAL MODEL

Strategic Planning. Dr. Mehran Sepehri Dr. Ali Kermanshah Graduate School of Management. Spring

BMOA: Binary Magnetic Optimization Algorithm

Seismic Analysis and Design of Steel Liquid Storage Tanks

Finite Element Methods (in Solid and Structural Mechanics)

List of Graduate Level Courses in Civil Engineering

CAE -Finite Element Method

The AUA Master s degree program is based upon MIT syllabi and curricula and the European professional requirements for chartered Civil Engineers.

CAE -Finite Element Method

Distance Learning Program

Graduate Certificate in Systems Engineering

A Binary Model on the Basis of Imperialist Competitive Algorithm in Order to Solve the Problem of Knapsack 1-0

TRAVELING WAVE EFFECTS ON NONLINEAR SEISMIC BEHAVIOR OF CONCRETE GRAVITY DAMS

OpenFOAM Optimization Tools

Job scheduling of parametric computational mechanics studies on Cloud Computing infrastructures

Numerical modeling of dam-reservoir interaction seismic response using the Hybrid Frequency Time Domain (HFTD) method

DEPARTMENT OF PETROLEUM ENGINEERING Graduate Program (Version 2002)

CHAPTER 4 4 NUMERICAL ANALYSIS

Computational Design Optimization Using Distributed Grid Resources

Miss S. S. Nibhorkar 1 1 M. E (Structure) Scholar,

(Seattle is home of Boeing Jets)

DYNAMIC ANALYSIS ON STEEL FIBRE

SEISMIC UPGRADE OF OAK STREET BRIDGE WITH GFRP

EFFECTS ON NUMBER OF CABLES FOR MODAL ANALYSIS OF CABLE-STAYED BRIDGES

Finite Element Analysis in Mechanical Engineering Design. Summer 2015 (Online)

Numerical analysis of boundary conditions to tunnels

International Journal of Software and Web Sciences (IJSWS)

CLOUD DATABASE ROUTE SCHEDULING USING COMBANATION OF PARTICLE SWARM OPTIMIZATION AND GENETIC ALGORITHM

Journal of Optimization in Industrial Engineering 13 (2013) 49-54

DYNAMIC ANALYSIS OF THICK PLATES SUBJECTED TO EARTQUAKE

1.054/1.541 Mechanics and Design of Concrete Structures (3-0-9) Outline 1 Introduction / Design Criteria for Reinforced Concrete Structures

TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW

The Master s Degree with Thesis Course Descriptions in Industrial Engineering

DISTANCE DEGREE PROGRAM CURRICULUM NOTE:

An Overview of the Finite Element Analysis

List of Problems Solved Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p.

Computer Graphics. Geometric Modeling. Page 1. Copyright Gotsman, Elber, Barequet, Karni, Sheffer Computer Science - Technion. An Example.

Finite Element Formulation for Beams - Handout 2 -

Numerical modelling of shear connection between concrete slab and sheeting deck

CRASH ANALYSIS OF AN IMPACT ATTENUATOR FOR RACING CAR IN SANDWICH MATERIAL

NONLINEAR BEHAVIOR AND FRAGILITY ASSESSMENT OF MULTI-STORY CONFINED MASONRY WALLS UNDER CYCLIC LOADS

Feature Commercial codes In-house codes

BUCKLING OF BARS, PLATES, AND SHELLS. Virginia Polytechnic Institute and State University Biacksburg, Virginia

Finite Element Method

Minimizing Response Time for Scheduled Tasks Using the Improved Particle Swarm Optimization Algorithm in a Cloud Computing Environment

Identification and Prioritization of Knowledge Flow Barriers Based on Organizational Knowledge Management Cycle (OKMC)

M.S. in Civil Engineering

Back to Elements - Tetrahedra vs. Hexahedra

Estimation of Adjacent Building Settlement During Drilling of Urban Tunnels

Curriculum Vitae HAMED QAHRI SAREMI

Analysis of the Response Under Live Loads of Two New Cable Stayed Bridges Built in Mexico

Draft Table of Contents. Building Code Requirements for Structural Concrete and Commentary ACI

COMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS

Plates and Shells: Theory and Computation - 4D9 - Dr Fehmi Cirak (fc286@) Office: Inglis building mezzanine level (INO 31)

Shell Elements in ABAQUS/Explicit

Thermo-Mechanical Coupled Simulation with LS-DYNA

Numerical Analysis of Independent Wire Strand Core (IWSC) Wire Rope

Numerical Methods for Engineers

New approaches in Eurocode 3 efficient global structural design

EARTHQUAKE DISASTER MITIGATION USING INNOVATIVE RETROFITTING METHOD

Resource Provisioning in Single Tier and Multi-Tier Cloud Computing: State-of-the-Art

! # # % % & () +, & +,,. / 0 % % ) () 3

INTEGRAL METHODS IN LOW-FREQUENCY ELECTROMAGNETICS

Atkins, Hilary et al ( 2001). Learning Style Theory and Computer MediatedComunication. Retrived from Educational Resources Information(ERIC).

COMPUTATIONIMPROVEMENTOFSTOCKMARKETDECISIONMAKING MODELTHROUGHTHEAPPLICATIONOFGRID. Jovita Nenortaitė

ELASTO-PLASTIC ANALYSIS OF A HEAVY DUTY PRESS USING F.E.M AND NEUBER S APPROXIMATION METHODS

NONLINEAR FINITE ELEMENT ANALYSIS FOR REINFORCED CONCRETE SLABS UNDER PUNCHING LOADS

Bridging Your Innovations to Realities

Personal Information. Professional Education

A quadrilateral 2-D finite element based on mixed interpolation of tensorial

Pragmatic multi-scale and multi-physics analysis of Charles Bridge in Prague

DESIGN SPECIFICATIONS FOR HIGHWAY BRIDGES PART V SEISMIC DESIGN

: ; d.donmez83@hotmail.com

A Novel Binary Particle Swarm Optimization

Structural Integrity Analysis

MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi

FOUNDATION DESIGN. Instructional Materials Complementing FEMA 451, Design Examples

EFFECT OF POSITIONING OF RC SHEAR WALLS OF DIFFERENT SHAPES ON SEISMIC PERFORMANCE OF BUILDING RESTING ON SLOPING GROUND

MODELLING OF AN INFILL WALL FOR THE ANALYSIS OF A BUILDING FRAME SUBJECTED TO LATERAL FORCE

WORK SCOPE. Domains in which we work:

Approach of software cost estimation with hybrid of imperialist competitive and artificial neural network algorithms

Transcription:

Saeed Shojaee Associate Professor in Structural Engineering Department of civil Engineerig, Shahid Bahonar University of Kerman, Kerman, Iran Phone: (+98-34) 33202559, Fax: (+98-34) 33220054 Email: saeed.shojaee@uk.ac.ir, saeed.shojaee@mail.uk.ac.ir Education Background Ph.D. Iran University of Science and Technology (2-2008) M.Sc. Iran University of Science and Technology (9-2003) B.Sc. Shahid Bahonar University (9-2001) Undergraduate courses Teaching Static & Dynamics Mechanics of Materials I,II Steel and Reinforced Concrete Structures Structural Analysis Steel and Special Projects Graduate courses Finite Element Methods Dynamic of Structures Nonlinear Analysis Advanced Engineering Mathematics I,II Seismic Design of Structures Control of Structures Advanced Computational Mechanics Boundary Element Methods Research Interests Optimal Analysis and Design of Structures Metaheuristic Optimization Techniques and Applications Computational Mechanics Seismic Design of Structures

Technical Reviewer Engineering Optimization The Structural Engineering and Mechanics Scientia Iranica The Structural Design of Tall and Special Buildings journal International Journal of Engineering Iranian Journal of Science and Technology Transactions of Civil Engineering Neural Computing and Applications International Journal of Applied Mechanics Applied Mathematical Modelling Finite Elements in Analysis and Design International Journal of Civil Engineering Iranian Journal of Fuzzy Systems Applied Soft Computing European Journal of Mechanics - A/Solids Journal of Computational Methods in Engineering Research Projects Granted 2010-2011 Topology Optimization of Structures Using A Level Set Method Based on B-Spline Functions, Shahid Bahonar University of Kerman. Publications BOOK (in farsi) Saeed Shojaee, Ali Shamshiri poor, Rasool Mohebifard, Steel Structural Design jahad e daneshgahi kerman, Volume 1 & Volume 2, 2014. Refereed Journals 1. Kaveh, and S. Shojaee, Discrete sizing Optimal Design of Scissor-link Foldable Structures Using Genetic Algorithm, Asian Journal of Civil Engineering, BHRC, 4 (2003) 115-133 2. A. Kaveh, and S. Shojaee, Optimal Design of Scissor-link Foldable Structures using ant Colony optimization Algorithm, Computer-Aided civil and Infrastructure Engineering 22 (2007) 56-64. 3. A. Kaveh, and S. Shojaee, Optimal design of skeletal Structures using ant colony optimization, Int. J. Numer. Meth. Engng 2007; 70; 563-581

4. A. Kaveh, and S. Shojaee, Optimal Domain Decomposition via p-median Methodology Using ACO and Hybrid ACGA, Finite Elements in Analysis and Design, 2008. 5. A. Kaveh, B. Hassani, S. Shojaee, S.M. Tavakkoli., Structural Topology Optimization Using Ant Colony Methodology, Journal of Engineering Structures 27(2008). 6. Saeed Shojaee, Sobhan Rostami, Ali Moeinadini, The numerical solution of dynamic response of SDOF systems using cubic B-spline, The Structural Engineering and Mechanics, An International Journal Vol. 38 No. 2, 2011. 7. S. Shojaee, M. Mohammadian, Piecewise Constant Level Set Method for Structural Topology Optimization with MBO Type of Projection, Struct. Multidisc. Optim. (2011) 44:455 469. 8. S. Shojaee and M. Mohamadian, A Binary Level Set Method for Structural Topology Optimization, Int. J. Optim. Civil Eng., 2011; 1:73-90. 9. Mojtaba Mohamadian and Saeed Shojaee, Binary level set method for structural topology optimization with MBO type of projection, Int. J. Numer. Meth. Engng 2012; 89:658 670. 10. S. Shojaee and S. Hasheminasab, The effects of initial sampling and penalty functions in optimal design of trusses using metaheuristic algorithms, Int. J. Optim. Civil Eng., 2011; 2:279-304. 11. S. Shojaee, N. Valizadeh and M. Arjomand Isogeometric structural shape optimization using particle swarm algorithm, Int. J. Optim. Civil Eng., 2011; 4:633-645. 12. Sobhan Rostami, Saeed Shojaee, Ali Moeinadini, A parabolic acceleration time integration method for structural dynamics using quartic B-spline functions, Applied Mathematical Modelling 36 (2012) 5162 5182. 13. S. Shojaee and N. Valizadeh, NURBS-based isogeometric analysis for thin plate problems, Structural Engineering and Mechanics, Vol. 41, No. 5 (2012). 14. S. Shojaee, M. Mohammadian, N. Valizadeh, COMPOSITION OF ISOGEOMETRIC ANALYSIS WITH LEVEL SET METHOD FOR STRUCTURAL TOPOLOGY OPTIMIZATION Int. J. Optim. Civil Eng., 2012; 1: 47-70. 15. Saeed Shojaee, Navid Valizadeh, Ebrahim Izadpanah, Tinh Bui, Tan-Van Vu, Free vibration and buckling analysis of laminated composite plates using the NURBS-based isogeometric finite element method, Composite Structures; 94 (2012) 1677-1693. 16. S. Shojaee, E. Izadpanah, A. Haeri, Imposition of essential boundary conditions in isogeometric analysis using the lagrange multiplier method, Int. J. Optim. Civil Eng., 2012; 2:247-271. 17. S. Shojaee, E. Izadpanah, N. Valizadeh, J. Kiendl, Free vibration analysis of thin plates by using a NURBS-based isogeometric approach, Finite Elements in Analysis and Design;61 (2012) 23 34.

18. S. Shojaee, M. Mohammadian, Structural Topology Optimization Using an Enhanced Level Set Method Scientia Iranica. (2012) 19 (5), 1157 1167. 19. S. Shojaee, M. Arjomand and M. Khatibinia, A hybrid algorithm for sizing and layout optimization of truss structures combining discrete PSO and convex approximation. Int. J. Optim. Civil Eng., 2013; 1:57-83. 20. S. Rostami, S. Shojaee, H. Saffari, An Explicit Time Integration Method for Structural Dynamics Using Cubic B-spline Polynomial Function, Scientia Iranica. (2013) 20 (1), 23 33. 21. S.H. Mahdavi and S. Shojaee, Optimum time history analysis of SDOF structures using free scale of Haar wavelet, Structural Engineering and Mechanics, Vol. 45, No. 1 (2013). 22. H. Fattahi, M. A. Ebrahimi Farsangi, S. Shojaee, H. Mansouri, Application of the hybrid harmony search with support vector machine for identification and calssification of damaged zone around underground spaces. Int. J. Optim. Civil Eng., 2013; 2:345-358. 23. H. Fattahi, S. Shojaee, M. A. Ebrahimi Farsangi, H. Mansouri, Hybrid Monte Carlo simulation and ANFIS-subtractive clustering method for reliability analysis of the excavation damaged zone in underground spaces. Computers and Geotechnics, Volume 54, October 2013, Pages 210-221 24. H. Fattahi, S. Shojaee, M. A. Ebrahimi Farsangi, H. Mansouri, Using latin hypercube sampling based on the ANN-HPSOGA model for estimation of the creation probability of damaged zone around underground spaces. Int. J. Optim. Civil Eng., 2013; 3:389-408. 25. P. Salajegheh, S. Shojaee, E. Salajegheh, M. Khatibinia, Reliability-based seismic assessment of asymetric multi-storey buildings with RC shear walls, Asian Journal of Civil Engineering (BHRC) 2 (2014) 26. S. Shojaee, M. Ghelichi, E. Izadpanah, Combination of isogeometric analysis and extended finite element in linear crack analysis. Structural Engineering and Mechanics, Vol. 48, No. 1 (2013) 125-150. 27. F. Homaei, S. Shojaee, G. Ghodrati Amiri, A direct damage detection method using Multiple Damage Localization Index Based on Mode Shapes criterion. Structural Engineering and Mechanics, Vol. 49, No. 2 (2014) 183-202 28. H. Fattahi, S. Shojaee, M. A. Ebrahimi Farsangi, Application of Adaptive Neuro-Fuzzy Inference System for the Assessment of Damaged Zone around Underground Spaces. Int. J. Optim. Civil Eng., 2013; 3(4):673-693 29. H. Fattahi, M. A. Ebrahimi Farsangi, S. Shojaee, H. Mansouri, Selection of a suitable method for the assessment of excavation damage zone using Fuzzy AHP in Aba Saleh Almahdi tunnel, Iran Arabian Journal of Geosciences (February 2014) 1-15.

30. H. Saffari, S. Shojaee, S. Rostami, M. Maleknejad, Application of Cubic Spline on Large Deformation Analysis of Structures, International Journal of Steel Structures. March 2014, Vol. 14, Issue 1, PP. 165-172. 31. S. Shojaee, E. Izadpanah, S. Nazari, Imposition of the essential boundary conditions in transient heat conduction problem based on Isogeometric analysis, Scientia Iranica B (2014) 21 (6) 1962-1972 32. F. Sarvi, S. Shojaee, P. Torkzadeh, Damage Identification of Trusses by Finite Element Model Updating Using an Enhanced Levenberg-Marquardt Algorithm. Int. J. Optim. Civil Eng., 2014; 4(2). 33. S. Shojaee, M. Asgharzadeh, A. Haeri Crack analysis in orthotropic media using combination of isogeometric analysis and extended finite element International Journal of Applied Mechanics. 2014; Vol.6, No.6. 34. H. Jari, H.R. Atri, S. Shojaee Nonlinear Thermal Analysis of Functionally Graded Material Plates Using a NURBS-based Isogeometric Approach Composite Structures, Volume 119, January 2015, Pages 333-345. 35. M. Amini, S. Shojaee and S. Rostami INELASTIC DYNAMIC ANALYSIS OF STRUCTURES UNDER BLAST LOADS USING GENERALIZED B-SPLINE METHOD Asian Journal of Civil Engineering, BHRC, 2 (2015). 36. A. Saber-Mahani, S. Shojaee, E. Salajegheh, M. Khatibinia Hybridizing two-stage metaheuristic optimization model with weighted least squares support vector machine for optimal shape of double-arch dams, Applied Soft Computing, 27 (2015) 205-218. 37. H.R. Atri, S. Shojaee, NURBS-BASED ANALYSIS OF CURVED ELEMENTS FOR THIN-WALLED STRUCTURES Asian Journal of Civil Engineering, BHRC, 3(2015) 451-470. 38. P. Torkzadeh, T. Jaffari, S. Shojaee Layout Optimization of Double-Layer Grids using modified genetic algorithm based on Fuzzy Inference System, Scientia Iranica A (2015) 22(5). 39. S. Shojaee, S. Rostami, A. Abbasi An Unconditionally Stable Implicit Time Integration Algorithm; Modified Quartic B-spline Method, Computers &Structures, Volume 153, June 2015, Pages 98-111.

40. H. Khabaz, S. Shojaee, E. Salajegheh, Combining Genetic Algorithms and Fuzzy Logic for Multi-Objective Optimization of Truss Structures Iranian Journal of Structural Engineering 2015 1(1) 1-17. 41. M. Shahrbanozadeh, G.A. Barani, S. Shojaee, Simulation of flow through dam foundation by isogeometric method Engineering Science and Technology, an International Journal 01/2015; 18(2) 185-193. 42. H.R. Atri, S. Shojaee, Free vibration analysis of thin shell structures using finite element based Isogeometric approach accepted for publication in Iranian Journal of Science and Technology, Transactions of Civil Engineering. 43. R. Kamgar, S. Shojaee, R. Rahgozar, REHABILITATION OF TALL BUILDINGS BY ACTIVE CONTROL SYSTEM SUBJECTED TO CRITICAL SIESMIC EXCITATION Asian Journal of Civil Engineering, BHRC, 6(2015) 819-833. 44. S. Shojaee, A.H. Daneshmand Crack Analysis in Media with Orthotropic Functionally Graded Materials Using Extended Isogeometric Analysis Engineering Fracture Mechanics, 147C (2015) pp. 203-227. 45. S. Shojaee, A. Mohaghegh and A. Haeri, Piecewise Constant Level Set Method Based Finite Element Analysis for Structural Topology Optimization Using Phase Field Method. Int. J. Optim. Civil Eng., 2015; 5(4). 46. S. H. Mahdavi, H. A. Razak, S. Shojaee, M. S. Mahdavi A comparative study on application of Chebyshev and spline methods for geometrically non-linear analysis of truss structures International Journal of Mechanical Science 101-102 (2015) 241-251.

Conference Proceedings Kaveh, A. S. Shojaee Optimal Design of Scissor-link Foldable Structures Using Genetic Algorithm Proc. of the 4 th on Engineering Computational Technology, Lisbon, September 2004. سعيد شجاعي نويد ولي زاده محمد ارجمند " بهينه سازي شكل سازه ها بر پايه ي آناليز ايزوژي ومتريك با استفاده از الگوريتم جامعه پرندگان" اولين همايش ملي سازه زلزله -ژي وتكنيك آذر 1389 مازندران _بابلسر. سعيد شجاعي ميثم غياث آبادي "بهينه سازي توپولوژي و شكل صفحات ضخيم به روش صفحه تراز با ضريب لاگرانژ و انحناي به روز شده " اولين همايش ملي سازه زلزله -ژي وتكنيك آذر 1389 مازندران _بابلسر. سعيد شجاعي مجتبي محمديان "بهينه سازي توپولوژي سازه با استفاده از روش تعيين تراز " اولين همايش ملي سازه زلزله -ژي وتكنيك آذر 1389 مازندران _بابلسر. علي معينالديني سعيد شجاعي سبحان رستمي " اثر بهبودسازي و پيوستگي شبكه در تحليل هم هندسي" ششمين كنگره ملي مهندسي عمران ايران سمنان ارديبهشت 1390. سيد شهرام قريشي سعيد شجاعي نويد ولي زاده حسن قاسم زاده " تعميم روش عددي ايزوژي ومتريك براي حل مساي ل دو بعدي داراي ترك در محيط همسانگرد به كمك روش اجزاي محدود توسعه يافته" ششمين كنگره ملي مهندسي عمران ايران سمنان ارديبهشت 1390 سعيد شجاعي محمد ارجمند نويد ولي زاده " طراحي بهينه خرپاها با متغيرهاي مختلط با استفاده از تركيب الگوريتم جامعه پرندگان اصلاح شده و روش مجانبهاي متحرك " ششمين كنگره ملي مهندسي عمران ايران سمنان ارديبهشت 1390 M. Mohamadian, S. Shojaee A Level Set Method for Structural Shape and Topology Optimization Using Radial Basis Functions 6th National Congress on Civil Engineering, April 26-27, 2011, Semnan University, Semnan, Iran. سبحان رستمي سعيد شجاعي علي معينهاي يك درجه آزادي با استفاده از توابع الديني "اراي ه روشي صريح در تحليل ديناميكي خطي و غيرخطي سيستم المللي زلزله شناسي و مهندسي زلزله ايران تهران ارديبهشت 1390.- اسپلاين مكعبي"ششمين كنفرانس بينB سعيد شجاعي سيد حسين مهدوي "تحليل ديناميكي سازه برشي با رفتار خطي و غيرخطي توسط مقياسهاي مختلف موجك هار" ششمين كنفرانس بينالمللي زلزله شناسي و مهندسي زلزله ايران تهران ارديبهشت 1390. S. Rostami, S. Shojaee, A. Moeinadini Investigation of Stability and Accuracy in Step-by-Step Direct Time Integration Methods 6th International Conference on Seismology and Earthquake Engineering, Iran, Tehran, May 2011. سبحان رستمي سعيد شجاعي علي معين- اسپلاين" سومين كنفرانس ملي سازه هاي فضاكار Bهاي فضاكار با استفاده از توابع الديني "تحليل ديناميكي سازه ايران تهران ارديبهشت 1390. علي معينهاي فولادي مهارشده" اولين كنفرانس ملي سازه و فولاد و الديني سعيد شجاعي سبحان رستمي "بررسي اثر حرارت بر عملكرد و طراحي ستون ماه 1389.دومين كنفرانس كاربرد فولادهاي پر استحكام در صنعت سازه ايران تهران دي علي معينهندسي و مقايسه آن با روش اجزاء محدود" نوزدهمين همايش سالانه مهندسي الديني سعيد شجاعي سبحان رستمي "معرفي روش تحليل هم مكانيك ايران بيرجند ارديبهشت 1390.

سعيد شجاعي نويد ولي زاده سيد شهرام قريشي "اراي ه روشي موثر براي اعمال بارهاي نقطهاي در تحليل ايزوژي ومتريك" نوزدهمين همايش سالانه مهندسي مكانيك ايران بيرجند ارديبهشت 1390. S. Shojaee, A. Moeinadini, S. Rostami NURBS-Based analysis of plane elasticity problems 19th Annual Conference on Mechanical Engineering-ISME 2011, Iran, Birjand, May 2011 M. ghelichi, S. Shojaee, E. izadpanah Improvement of isogeometric method in crack analysis 9th International Congress on Civil Engineering, May 8-10, 2012, Isfahan University of Technology (IUT), Iran. M. Askarian, M.R. Maheri, S. Shojaee Size and topology optimization of trusses using hybrid geneticparticle swarm algorithms 9th International Congress on Civil Engineering, May 8-10, 2012, Isfahan University of Technology (IUT), Iran. E. izadpanah, S. Shojaee, M. ghelichi Imposition of essential boundary condition in heat conduction problem based on Isogeometric analysis 9th International Congress on Civil Engineering, May 8-10, 2012, Isfahan University of Technology (IUT), Iran. سعيد شجاعي نويد ولي زاده " تحليل ارتعاش آزاد و كمانش ورقهاي چندلايهي كامپوزيت با استفاده از روش ايزوژي ومتريك " نهمين كنگره بين المللي مهندسي عمران دانشگاه صنعتي اصفهان ارديبهشت ماه 1391 سعيد شجاعي علي معين الديني و سبحان رستمي " استفاده از توابع T- اسپلاين در بهبودسازي تحليل هم هندسي " نهمين كنگره بين المللي مهندسي عمران دانشگاه صنعتي اصفهان ارديبهشت ماه 1391. رضا فرزان سعيد شجاعي " اراي ه المان سطح مشترك براي تحليل تيرهاي كامپوزيت" كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1390. مجتبي اصغري سرخي سعيد شجاعي " روش نوين لحاظ آثار غير الاستيك در آناليز پايداري سازه هاي فولادي" كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1390. مجتبي اصغري سرخي سعيد شجاعي" روش هاي نوين آناليز پايداري سازه هاي فولادي در آيين نامه هاي مختلف" كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1390. امير صابر علي لصغر امينيان عيسي سلاجقه سعيد شجاعي " بررسي ميزان تاثير متغيرهاي طراحي شكل سد قوسي تحت تحريك نيروهاي زلزله" كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1390. مصطفي قليچي سعيد شجاعي سيد حامد شكيب حميد شجاع رستگاري "آناليز رفتار هيدروديناميكي سازه شناور بزرگ با استفاده از روش ايزوژي ومتريك" كنفرانس ملي بهرهبرداري از آب دريا مركزبينالمللي علوم وتكنولوژي پيشرفته و علوم محيطي و دانشگاه شهيد باهنر كرمان 13 و 14 دي ماه - 1390 كرمان. نجمه صادقپور سعيد شجاعي فاي زه پورهاشمي "حل عددي معادله حاكم بررفتار ديناميكي قابهاي برشي يك درجه آزادي با استفاده از توابع موجك Bاسپلاين درجه 2" كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1391. فاي زه پورهاشمي سعيد شجاعي نجمه صادقپور " بررسي عملكرد اتصالات قاب هاي برون محور تحت زمين لرزه ميدان نزديك". كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1391.

سعيد شجاعي پيمان تركزاده فاطمه سروي " بهبود الگوريتم اجتماع ذرات توسط آناليزحساسيت جهت تشخيص خرابي سازه ها". كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1391. مهدي نور محمديان سعيد شجاعي "تحليل ارتعاش آزاد ورق هاي چند لايه كامپوزيتي با در نظر گرفتن تي وري برشي مرتبه سوم با استفاده از روش ايزوژي ومتريك". كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1391. قلياني پيمان تركزاده سعيد شجاعي "مقايسه نتايج حاصله از تحليل هاي استاتيكي فزاينده و ديناميكي فزاينده". كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1391. فرشاد همايي غلامرضا قدرتي اميري سعيد شجاعي عيب يابي چندگانه در سازه ها بر اساس تابع پاسخ فركانس اندازه گيري شده كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1391. پدرام سلاجقه عيسي سلاجقه سعيد شجاعي محسن خطيبي نيا " تاثير جهت زلزله بر عملكرد لرزه اي سازه هاي سه بعدي بتني با توزيع نامتقارن ديوار برشي" كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه 1391. علي اكبر مقصودي سعيد شجاعي باهادور نيكو".1391 ارزيابي رفتار ستون ها درساختمان هاي بتن مسلح با سيستم دو گانه و بررسي سطوح عملكرد بر اساس دستورالعمل هاي بهسازي لرزه اي " كنفرانس ملي زلزله سازه و روش هاي محاسباتي جهاد دانشگاهي دانشگاه شهيد باهنر كرمان كرمان ايران مهر ماه مرتضي براتي سعيد شجاعي محمد جواد زاهدي "تحليل صفحات چند لايه با استفاده از توابع پايه "PHT-Spline هفتمين دانشگاه زاهدان ارديبهشت ماه 1392. كنگره ملي مهندسي عمران لعيا بيجاري سعيد شجاعي جواد سلاجقه حسين ابراهيمي " بهبود عملكرد الگوريتمهاي فراكاوشي درتركيب با روشهاي جستجوي مستقيم. " هفتمين ملي مهندسي عمران دانشگاه زاهدان ارديبهشت ماه. 1392 كنگره محمد روزپيكر سعيد شجاعي "بهينه يابي توپولوژي پوسته ها با استفاده از روش تعيين تراز غير خطي" ارديبهشت ماه. 1392 هفتمين كنگره ملي مهندسي عمران دانشگاه زاهدان زهره خادمپر سعيد شجاعي كنگره ملي مهندسي عمران دانشگاه زاهدان " بهينه سازي قابها به كمك تركيب الگوريتم جامعه پرندگان و مورچگان با ماشين بردار پشتيبان تحت اثر تحريك زلزله" هفتمين ارديبهشت ماه. 1392 M.J. Zahedi, S. Shojaee, M. Barati Isogeometric Analysis Applied to Large Elasto-Plastic Deformation in Solid Mechanics 7th National Congress on Civil Engineering, May 8-10, 2013, Zahedan University, Iran. H. Motasadi,, S. Shojaee Multiobjective topology optimization of structures using particle swarm optimization algorithm, 7th National Congress on Civil Engineering, May 8-10, 2013, Zahedan University, Iran. محسنه اسدي سعيد شجاعي پيمان تركزاده "بهينه سازي قاب دوبعدي با استفاده از تركيب الگوريتم جامعه پرندگان و مدل جايگزين فرآيند گوسي تحت بار زلزله " هشتمين كنگره ملي مهندسي عمران دانشگاه صنعتي نوشيرواني بابل ارديبهشت ماه. 1393

حميد خباز عيسي سلاجقه سعيد شجاعي "بهكارگيري منطق فازي در الگوريتم وراثتي با رتبهبندي نامغلوب جهت بهينهسازي چند هدفهي سازههاي خرپايي" هشتمين كنگره ملي مهندسي عمران دانشگاه صنعتي نوشيرواني بابل ارديبهشت ماه. 1393 آرمان نيا سعيد شجاعي پيمان تركزاده "بهينه سازي محيط هاي پيوسته سه بعدي با روش سطوح تراز مبتني بر تحليل تنش " هشتمين كنگره ملي مهندسي عمران دانشگاه صنعتي نوشيرواني بابل ارديبهشت ماه. 1393 معين حكيمي پور و سعيد شجاعي " طراحي خرپاهاي فولادي با الگوريتم هاي تكاملي چند هدفه و منطق فازي" هشتمين كنگره ملي مهندسي عمران دانشگاه صنعتي نوشيرواني بابل ارديبهشت ماه. 1393 تقي جعفري سعيد شجاعي پيمان تركزاده و جواد سلاجقه "بهينه سازي همزمان سايز شكل وتوپولوژي شبكه هاي دو لايه فضاكار با استفاده از الگوريتم اجتماع ذرات اصلاح شده " هشتمين كنگره ملي مهندسي عمران دانشگاه صنعتي نوشيرواني بابل ارديبهشت ماه. 1393 فاطمه پورفارسي و سعيد شجاعي "حل مساي ل پيوسته دوبعدي با استفاده از تركيب روش المان مرزي و تحليل هم هندسي" دومين كنگره بين الملي معماري وتوسعه شهري ايران تبريز آذر ماه. 1393 سازه بتول نژاد محمودآبادي و سعيد شجاعي "تحليل خطا در تحليل ايزوژي ومتريك با استفاده از روشهاي بهبودسازي " دومين كنگره بين الملي وتوسعه شهري ايران تبريز سازه معماري آذر ماه. 1393 نعيمه خسروي تهران دي ماه. 1393 و سعيد شجاعي " تحليل غير خطي صفحات FGM تحت خمش با استفاده از روش ايزوژي ومتريك " اولين همايش ملي مهندسي سازه ايران

Graduate Students Supervised (Ph.D.) H. Fatahi Analysis of Excavation Damage Zone due to Blasting, Using Soft Computing and Reliability Methods Shahid Bahonar University of Kerman (September 2013). S. Rostami, Development and generalization of a direct time integration method based on B- splines for nonlinear dynamic analysis of structures, Shahid Bahonar University of Kerman (Under Preparation) Graduate Students Supervised (M.SC.) M. Arjomand, Optimal Design of Trusses with Mixed Variables Using Hybrid of Modified Particle Swarm Optimization Algorithm and Method of Moving Asymptotes. Shahid Bahonar University (July 2011) M. Ghiasabadi, Topology Optimization of Plates under Dynamic Loading Using Level Set Method. Shahid Bahonar University (April 2011) H. Fazeli, Performance Based Layout optimization of Dual Frames using Hybrid Genetic Algorithm and Particle Swarm Algorithm. Shahid Bahonar University (September 2011) N. Valizadeh, Application of Isogeometric Analysis in Computational Mechanics and Optimization Problems. Shahid Bahonar University (September 2011) M. Asghari, Stability Design of Steel Structures with Direct Analysis Method Based on Seismic Design. Shahid Bahonar University (September 2011) R. Farzan, Nonlinear Analysis of Composite Beams Using Approximation Methods. Shahid Bahonar University (September 2011) E. Izadpanah, Topology Optimization of Structures Using an Isogeometric Based Level Set Method. Shahid Bahonar University (February 2012)

N. Sadeghpoor Numerical solution of equation of motion using B-spline wavelet Shahid Bahonar University (February 2012) F. Poorhashemi The influence of connections behavior in eccentrically braced frames under the near-field earthquake Shahid Bahonar University (February 2012) M. Maqsudi Moment redistribution of post-tensioned beams consisting of self compacting concrete strengthened with FRP Shahid Bahonar University (September 2012). M. Barati Using PHT-splines in isogeometric analysis of computational mechanic problems Shahid Bahonar University (March 2013). Z. Khadempar Improvement of meta-heuristic algorithms in optimal design of large scale structures using meta modeling simulation Shahid Bahonar University (March 2013). M.J. Zahedi Nonlinear Analysis of large deformation problems using isogeometric analysis Shahid Bahonar University (March 2013). A. Moameni. Shahid Bahonar University (March 2013). M. Asgharzadeh Crack Analysis of Orthotropic Plates using Extended Isogeometric Analysis Shahid Bahonar University (December 2013). A. Mohaghegh. Topology Optimization of 2D Continuum Media Using level set based Phase field method Shahid Bahonar University (January 2014). A. Abassi Nasab. Stabilizing Unconditionally Stable B-Spline Method Used in Dynamic Analysis of Structures Shahid Bahonar University (January 2014). H. Atri. How Accurate is the Shell Analysis in Framework of Isogeometric Analysis Shahid Bahonar University (January 2014).

H. Pirouzi. Shahid Bahonar University (January 2014). S. Abaszadeh. Multi-objective Optimization of Water Distribution Networks Shahid Bahonar University (January 2014). S.A.H. Daneshmand. Crack analysis of FGM plates using extended Isogeometric approach Shahid Bahonar University (January 2015). B. Nejad-mahmoodabadi. Error estimation in Isogeometric analysis with refinement methodology view Shahid Bahonar University (January 2015). M. Ramezani. Application of Isogeometric analysis in time dependent problems Shahid Bahonar University (January 2015). F. Poorfarsi. Combining boundary element method and Isogeometric approach to analyze of 2D continuous problems Shahid Bahonar University (January 2015). N. Khosravi. Nonlinear Thermal Bending Analysis of Functionally Graded Material Plates Using Isogeometric based Finite Element Method Shahid Bahonar University (January 2015). ------------------------------------------------------- Mojtaba Mohammadian, Topology Optimization of structures Using Enhanced Level Set Methods. Kerman Graduate University of Technology (July 2011) Mostafa Ghelichi, Improvement of isogeometric analysis in crack analysis using extended finite element. Kerman Graduate University of Technology (February 2012) Mehdi Noormohamadian Isogeometric analysis of multilayered plates using non classical theories. Kerman Graduate University of Technology (September 2012) Pedram Salagegheh Reliability-based seismic assessment of asymmetric multi-story buildings with RC shear walls. Kerman Graduate University of Technology (March 2013)

Fatemeh Sarvi Damage Detection by Finite Element Model Updating Using an Enhanced Levenberg-Marquardt Algorithm. Kerman Graduate University of Technology (March 2013) Ali Gardandeh. Kerman Graduate University of Technology (October 2013) Taghi Jaffari Simultaneous Optimization of the Size, Shape and Topology of the Double- Layer Grids Using Modified Genetic Algorithm Kerman Graduate University of Technology (January 2014) Arman Nia Topology Optimization of 3D Continuum Media Using level set Method based Stress Analysis. Kerman Graduate University of Technology (January 2014) Mohsene Asadi Optimal Seismic Design of Steel Structures Using Meta-Heuristic Algorithms Improved with Meta Modeling Gaussian Simulation Kerman Graduate University of Technology (January 2014) Hamid Khabaz Multi-Objective Optimal Design of Truss Structures Using Modified Genetic Algorithm Based on Fuzzy Logic Kerman Graduate University of Technology (January 2014) Mohammad Hagesmaili Error Estimation and Refinement in Iso-Geometric Analysis of Multi layered Plates using Non-Classic Theories Kerman Graduate University of Technology (September 2014) Mehdi Haghi Nonlinear Thermal Buckling Response of FGM Plates Due to Heat Conduction Using IGA Kerman Graduate University of Technology (January 2015) Pooya Gavaherian Influence of Seismic Parameters in Incremental Dynamic Analysis of The Dual System Frames Kerman Graduate University of Technology (January 2015)

----------------------------------------------------------------------------------------------------------------- Sobhan Rostami, The Numerical Solution of Dynamic Response of Structures Using B-Spline Functions. Kerman Azad University (September 2010) Ali Moeinadini, The Effect of Continuity and Mesh Refinement in Isogeometric Analysis. Kerman Azad University (September 2010) Keyvan Hosseini Zeidabadi, Size Optimization of Trusses Using Hybrid GA and PSO. Kerman Azad University (September 2010) Seyed Hosein Mahdavi, Linear and Nonlinear Dynamic Analysis of Structures Using Free Scale Chebyshev Wavelets. Kerman Azad University (April 2011) Seyed Saeed Hashemi Nasab, The effects of initial sampling technique and Augmented Lagrangian penalty functions in convergence rate of metaheuristic algorithms. Kerman Azad University (July 2011) Rouhollah Firoozabadi, Nonlinear hydrodynamic analysis of offshore floating structures by boundary element method Kerman Azad University (February 2012) Afsaneh Iranmanesh Seismic analysis of structures using time-frequency spectrum Kerman Azad University (March 2012) Dawood Hoseinalipour Assessment of numerical methods in cold-formed steel structure analysis Kerman Azad University (September 2012) Hadi Mortazavi Size and shape optimization of trusses using improved Cuckoo optimization algorithm Kerman Azad University (September 2012) Hamed Motesadi Multi-Objective Topology Optimization of 2-Dimentional Continuum Structures using Hybrid Genetic and Particle Swarm Algorithms Kerman Azad University (September 2013) Moien Hakimipoor Application of Evolutionary Multi-Objective Optimization Algorithms Based on Fuzzy Logic and Multi-Objective Genetic Algorithm for Optimal Design of Structures Kerman Azad University (January 2014)

Moien Atghaee Dynamic response of composite beam under blast loading Kerman Azad University (January 2014) Hamid Jari Static, Buckling and Dynamic Analysis of Functionally Graded Material Plates Using Isogeometric Method Kerman Azad University (May 2014) Ammar Asadi Sensitivity Analysis of Dynamic Responses of Buried Structures Due to Blast loading Kerman Azad University (October 2014) Ali Nagafi Topology optimization of 2D Continuum Structures using Level Set Methods based Stress Minimization Kerman Azad University (October 2014) Fatemeh Mohamadi Solving wave equation in time and space using Isogeometric Based formulation and five stage-fourth order 2N storage Runge Kutta schemes Kerman Azad University (February 2015)