Gasper Strahovnik Selected projects
2 Profile Yacht designer, a graduate of the Westlawn Institute of Marine Technology, cooperated with high-end boat design and boatbuilding company from Slovenia for several years. The diversity of projects portfolio creates a cross flow of thinking, focus to maintain position at the edge of yacht design. Fresh ideas allow skills and knowledge flow across the all areas of the design spectrum. Common denominator of projects over the entire portfolio is the efficiency, easily driven and seaworthy sail and motor boats. Years of experience as a waterman combined with designing sail and motor boats, an experience in naval architecture benefiting from computer aided design is a springboard in a challenge towards raising the standards by pushing the limits of innovation and design. Birth 02. 02. 1984 Nationality Slovenian Email gasper.strahovnik@gmail.com gasper@tender-one.com Mobile 00 386 31 449 222 00 238 59 638 70 Website www.linkedin.com/in/strahovnik www.tender-one.com
VSR Boats & VSR Lab (www.vsrlab.com) 26 th November 2003 1 st December 2008 3 VSR 5.8C Responsibilities: - Overall desing development - Production manager in Slovenia - Production supervisor in Romania and BiH - Interior development - Electrical system design - Tooling - Working drawings - Hand layup lamination - Outboard engines mounting - Assembly - Prototype remodeling - Testing - Vacuum infusion prototyping - Tecnhical specifications - Scantling plans updates - Production drawings - Owner s manual
VSR Boats & VSR Lab (www.vsrlab.com) 26 th November 2003 1 st December 2008 4 VSR 5.2 and VSR 5.9 Pro Responsibilities: - Overall desing development - Production manager in Slovenia - Interior development - Tooling - Working drawings - Hand layup lamination - Outboard engines mounting - Assembly - Prototype building - Testing - Owner s manual
VSR Boats & VSR Lab (www.vsrlab.com) 26 th November 2003 1 st December 2008 5 VSR 5.4 Responsibilities: - Overall desing development - Production manager in Slovenia - Production supervisor in Romania and BiH - Interior development - Electrical system design - Tooling - Working drawings - Hand layup lamination, vacuum infusion - Outboard engines mounting - Assembly - Prototype remodeling - Testing - Vacuum infusion prototyping - Tecnhical specifications - Scantling plans updates - Production drawings - Owner s manual
VSR Boats & VSR Lab (www.vsrlab.com) 26 th November 2003 1 st December 2008 6 VSR 5.8R Responsibilities: - Overall desing development - Production supervisor in Romania and BiH - Interior development - Electrical system design - Tooling - Working drawings - Hand layup lamination, vacuum infusion - Outboard engines mounting - Assembly - 3D one off Light RTM development - Testing - Vacuum infusion prototyping - Tecnhical specifications - Scantling plans updates - Production drawings - Owner s manual
VSR Boats & VSR Lab (www.vsrlab.com) 26 th November 2003 1 st December 2008 7 VSR 4.9 Responsibilities: - Overall desing development - Preliminary design - Interior development - Electrical system design - Tooling - Working drawings - CE certification - 3D one off Light RTM development - Testing, sea trials - Tecnhical specifications - Scantling plans - Production drawings - Owner s manual
VSR Boats & VSR Lab (www.vsrlab.com) 26 th November 2003 1 st December 2008 8 VSR 8.0 VSR 8.6 VSR 8.8 VSR 9.8 VSR 8.0 VSR 8.6 Responsibilities: - Overall desing development - Interior development - Electrical system design - Tooling - Working drawings - Hand layup lamination - Outboard engines mounting - Assembly - Prototype remodeling - Testing - Vacuum infusion - Tecnhical specifications - Scantling plans updates - Production drawings - Owner s manual VSR 8.8 VSR 9.8
VSR Boats & VSR Lab (www.vsrlab.com) 26 th November 2003 1 st December 2008 9 Steering console design Responsibilities: - Overall desing development - Preliminary design - 3D model detailing - CAM milling components - Interior development - Electrical system design - Tooling - Working drawings - 3D one off Light RTM development - Tecnhical specifications - Scantling plans - Production drawings
Sel f Practicing 10 7.5 m PB consultancy Tasks undertaken: - Overall desing development - Interior development - Hull structure design - Systems desig - Working drawings - Tecnhical specifications - Scantling plans - Owner s manual - CE documentation
Graduation projects Westlawn Institute of Marine Technology, Eastport, ME, USA 11 55 LOA Sailing Boat >>ESTRELA NOVA<< Boat data: - LOA: 57 - DWL: 53 - BOA: 15.3 - BWL: 14.2 - Displacement: 51706# - LCB: 56.7% DWL aft st.0 - VCB: +1.45 DWL - D/L: 156 - Cp: 0.52 - Cb: 0.36 - Am: 33.12 sq.ft. - Cm: 0.79 - WPA: 500 sq.ft. - Cwp: 0.66 - Sail area: 1787 sq.ft. - Ballast: 12300# - Ballast Ratio: 23.8% - Engine power: 110 BHP - Gear ratio: 2.63 - Propeller dia: 16 - Propeller pitch: 24 - Max. Speed / range: 9.8 kts / 224 nm - Cruising speed / range: 9.30 kts / 337 nm - Fuel tankage: 164 US.gal. - Fresh water tankage: 172 US.gal. - Black water tankage: 87 US.gal.
Graduation projects Westlawn Institute of Marine Technology, Eastport, ME, USA 12 55 LOA Sailing Boat >>ESTRELA NOVA<< Scope: - General arrangement - Hull design - 3D modeling hull and deck - 3D modeling interior - Interior arrangement design - Sail plan design - Weight calculation - Stability calculation - Scantling plans Aluminum and FRP - Deck hardware detailing - Hull structure design - Deck hardware detailing - Keel design - Keel engineering - Rudder design - Rudder engineering - Wood joinery design + detailing - Electrical plan - HVAC - Hydraulic systems - Powertrain - Preformance prediction and range - Technical specification - Preliminary renderings
Graduation projects Westlawn Institute of Marine Technology, Eastport, ME, USA 13 6.5m Rescue RIB Boat data: - LOA: 7.1m - DWL: 5.5m - BOA: 2.3m - BWL: 1.57m - Displacement: 1170 kg - LCB: 68.2% DWL aft st.0 - VCB: +14.8 cm DWL - D/L: 197 - Cp: 0.63 - Cb: 0.34 - Am: 0,24 sq.m. - Cm: 0.54 - WPA: 5,63 sq.m. - Cwp: 0.33 - Engine power: 2x 73 BHP - Gear ratio: 2.33 - Propeller dia: 13-1/4 - Propeller pitch: 22-7/8 - Max. Speed / range: 40.8 kts / 219 nm - Cruising speed / range: 34.1 kts / 354 nm - Fuel tankage: 200 ltrs
Graduation projects Westlawn Institute of Marine Technology, Eastport, ME, USA 14 6.5m Rescue RIB Scope: - General arrangement - Hull design - 3D modelling hull and deck - 3D modelling interior - Interior arrangement design - Sail plan design - Weight calculation - Various loadcase studies - Stability calculation - Scantling plans Aluminum and FRP - Deck hardware detailing - Hull structure design - Deck hardware detailing - Steering console design - Jockey seats design - Electrical plan - Hydraulic systems - Powertrain - Preformance prediction and range - Technical specification - Preliminary renderings
Tender One Project in conjunction with Powertrain R&D - MEJ d.o.o. 15 8.0 m Electric + Hydrogen Tender Boat data: - LOA: 8.0 m - DWL: 6.4 m - BOA: 2.35 m - BWL: 2.05 m - Displacement: 2200 kg - Motor power: 120 kw - Fuel cell power: 3x 30 kw - Hydrogen storage: 25 kg @ 350 bar - Battery capacity: 42 kwh - Max. Speed / 1h availability : 31 kts / 12 min - Cruising speed / range: 22 kts / 100 nm
Tender One Project in conjunction with Powertrain R&D - MEJ d.o.o. 8.0 m Electric + Hydrogen Tender 16 Scope: - Propriator and project lmaganer - General arrangement - Hull design - 3D modelling hull and deck - 3D modelling interior - Interior arrangement design - Weight calculation - Various loadcase studies - Stability calculation - Scantling plans Aluminum - Deck hardware detailing - Hull structure design - Deck hardware detailing - Steering console design - Jockey seats design - Electrical plan - Hydraulic systems - Preliminary powertrain configuration - Preformance prediction and range - Technical specification - Preliminary renderings - Web and graphic design - 3D print (scaled size presentation model)