page 1 Office Furniture Germany
page 2
page 3 single desk setup typ xt continuous CPU box sitting position (68 cm) single self supporting unit installation and reconfiguration to various linear sizes possible modular desk capable to be modified to multiple back-to-back configurations fully compliant with statuary ergonomic and safety standards standing position (120 cm) maintenance: open CPU box
page 4 double desk setup continuous CPU box sitting position (68 cm) standing position (120 cm) maintenance: open CPU box modular desk capable to be modified to single configurations continuous CPU box throughout the whole desk The completely closed compartment as well as the cable tray house the CPUs and all further equipment and therefore offer a perfect integration of all technical units.
page 5 structure Desk Top - TFT- mount tabletop - personnel power support frame - slat wall Cable Management Area - cable trough - ventilation grill - grommets / strain-reliefs Construction - compartment - trolleys / doors - termination boards - main cable access Flexibility and ergonomics are the main characteristics and advantages of Leuwico Dealing Desks. The modular design system enables a competitive realisation of different kinds of design and comfort. This construction enables a quick installation and easily made modifications.
page 6 height adjustment Comfortable access to the entire technical equipment during working hours The height adjustment 1. Ergonomics The change between sitting and standing improves the physical well-being and therefore the mental capability and ability to concentrate. 2. Technics All service, maintenance and installation can easily be done in a standing position during working hours. The clearing of the table and the remove of cable duct covers is not necessary. Technicians and operators can both easily work parallel without interruption.
page 7 equipment integration Perfect cable management throughout all levels cable routing at LCD holders cable outlets in ventilation grill cable fixing underneath work top cable routing from work top into cable tray (optional with cable chains) cable routing (cable outlets) from cable tray into CPU box access of cables from raised floor to beneath the work surface level allowed openings at the side of the CPU boxes for cabling through with linear configurations Advantages: Perfect cable management for individual integration and steady cable routing. A quick access to all equipment enables the technicians and operators to work without interruption. As a result of the clear visible cablemanagement modifications can be carried out immediately.
page 8 equipment integration Large-volume cable tray underneath the work top housing of cables and installation elements (power sockets, cables, IT wiring) perforated metal enables a flexible fixing of all installation elements access to the CPU compartment by hinged or sliding doors, with or without locks bumper on each side protect the power cables and data lines against damage when moving the trolleys in or out connection of multi-outlet power strips according to individual requirements
page 9 equipment integration CPU Integration 126 cm single desk double desk Example: CPU-BOX (clear inside dimensions) 126 cm wide 67 cm deep CPU 17 cm wide 46 cm deep 45 cm high 67 cm TROLLEY (for 3 CPUs) 52 cm wide 53,5 cm deep different sized trolleys with ventilation slots and fixing elements guarantees a safe positioning of the CPUs integrated guide rollers offer perfect comfort when moving in and out additionally attached cable chain ensures a controlled cabling between the CPUs and the main cable-tray 150 cm
page 10 monitor installation Monitor swivel-arm with proven stability Leuwico-swivel-arm provides you the ultimate flexibility in TFT-panel support arms.
page 11 monitor installation Monitor swivel arm individual height adjustment with integrated handle fine adjustment integrated in the VESA end plate cable management integrated quick release for fast removal of monitors usable for pole and slatwall-style trading desks load capacity of each monitor arm up to 20 kg locking against unintended remove and vibrations supplementary accessories for organisation and filling trays and personnel lightning adjustment without tools quick release for instant change
page 12 open desk type open desk type Dealing Desks with an open construction can be used in dealing rooms where the CPUs are located remote. This open design is available for single as well as for double desks. Large cable trays enable the installation of all components and of 19 racks that are connected to the CPUs located remote. The height adjustment and all ergonomical features are the same. Consequently the desk can be used as a standard or back office workstation.
page 13 slat wall desk type slat wall desk type With regard to the heat management and organisation of workflow a Dealing Desk with integrated slat wall offers various advantages in a Dealing Room. The slat wall between the monitors leads the hot air of the CPUs directly into the room by its chimney effect. In connection with a room air condinioning system in the false floor the slat wall provides the perfect solution. Additionally integrated fans support the active circulation. LCD holders can be attached to the slat wall without using any tools and create an ergonomical workcenter together with filing trays and lighting systems. Frame laterally closed Doors are closed for active cooling
page 14 heat management The different kinds of convection Natural convection The hot air generated by the CPUs leaves the compartment through the perforated cable tray and through the inserted ventilation grill directly into the room. Ventilation sots in the doors enable a natural circulation of air without draught. Active convection Additional fans installed under the ventilation grill boost the natural convection. An additional slat wall leads the hot air more directed into the room by its chimney effect. Support of the active convection slat wall centrally attached installed cooler fan perforated door for natural and active convection closed door for installed cooling convector
page 15 heat management Active cooling absorption of the hot air by openings with cartridges at the top cooling of the hot air by cooling units, release of the cool air through lateral openings cooling capacity: 1200W 2100W depending on the flow temperature connected to on-site chilled water flow and return through the raised floor adjustable cooling capacity by integrated thermostat, also controllable by remote control Free standing cooling convector for a dry cooling inside the closed CPU compartment thermally sealed CPU compartment Technical Details power supply 230V supply and return to the in-house water system min. +16 C return temperature from ca. 21 C - 27 C Product characteristics economical and comfortable cooling mobile use high performance at compact size
page 16 work top Work tops for different types of design and comfort solid core laminate with different surface designs solid wood veneer with solid wood edges with different thickness surface in melamine resin coating, unicolored or wood imitated with solid leading rubber edge linoleum inlays in different colours and designs leather covered for high comfortable requirements Leading rubber edge for a robust front edge
page 17 endpanel / backpanel Side and back panels with different surfaces and designs well fitting to the desk- and interior design one or several parts, with or without cable outlets continuous side panel divided side panel side and back panel for single desk
page 18 pedestal storage We supply an extensive range of pedestal storage wood, steel or plastic several depths, 60 or 80 cm two heights: desk high or under desk mobile or free standing filling frames and accessories with counterweight or fifth castor melamine blinds solid wood blinds perfect design integrated plastic blinds
page 19 end-/equipmentcounter Customized solutions for a perfect work environment individually planned and bespoke work for all requirements design and colour matching to the Dealing Desks and to the room architecture interior layout, cable outlets and cable channels for connection to the printers Storage units and printer desks for double desk sides
page 20 end-/equipmentcounter Placed at the end of a row with single desks and replaces a back panel For 2x or 3x suspended files Storage units and printer desks for single desks backs and back panels
page 21 Contact LEUWICO Office furniture Postal address: Hauptstraße 2-4 96484 Wiesenfeld GERMANY Telephone: +49 (0) 9566-88-0 Fax: +49 (0) 9566-88-114 Email: info@leuwico.com Web: www.leuwico.com Reference Partner: Jörg Friedrich Mobile: +49 (0) 173-3539063 Email: jf@leuwico.com We are looking forward of the prospect of working with you.
page 22 With our global partner network we provide a sustainable service for individual consulting, installation and maintenance works.