Page 1 of 35 SERPATTACKS MANUAL (FREE VERSION)
Page 2 of 35 TABLE OF CONTENT SERPANALYZER... 4 SERPANALYZER AVAILABLE COLUMN... 5 SERPANALYZER SEND TO... 6 SERPANALYZER REGENERATE DIFFICULTY RATING... 7 KEYWORD RESEARCH... 8 KEYWORD FINDER... 9 KEYWORD FINDER ADD GOOGLE ADWORD ACCOUNT... 10 KEYWORD FINDER MATCH TYPE... 11 KEYWORD FINDER COLUMN LINKS... 12 AMAZON PRODUCTS... 13 CLICK BANK... 14 DOMAIN FINDER... 15 RANK TRACKER... 16 RANK TRACKER ADD/EDIT PROJECT... 17 RANK TRACKER PAGE RANK GRAPH REPORT... 18 RANK TRACKER PAGE RANK HISTORY REPORT... 19 RANK TRACKER COMPETITION HISTORY REPORT... 20 BACKLINK CHECKER... 21 BACKLINK CHECKER PAGE RANK COUNT... 22 BACKLINK CHECKER IP ADDRESS COUNT... 23 BACKLINK CHECKER ANCHOR COUNT... 24 BACKLINK CHECKER TLD COUNT... 25 PPC FETCHER... 26 PPC FETCHER ADD/EDIT PROJECT... 27 PPC HISTORY REPORT... 28
Page 3 of 35 PPC ADS BY KEYWORDS REPORT... 29 PPC ADS BY DOMAIN REPORT... 30 PAGECONTENT HELPER... 31 PAGE CONTENT HELPER ADD EDIT PROJECT... 32 PAGE CONTENT HELPER REPORT... 33 ROTATING PROXY... 34 ADDING/UPDATE ROTATING PROXY... 35
Page 4 of 35 SERP ANALYZER Is used to get all leading website for a specific keyword. You can see here all the factors that made all leading websites go on top of search result. With the difficulty rating you can also know how difficult to dominate a specific keyword. To use SERPANALYZER do the following: 1. Enter keyword 2. Select the result count you want to see. (Its recommended to use only ten result count) 3. Select the country 4. Then press Search The keyword difficulty will automatically show in the bottom section.
Page 5 of 35 SERPANALYZER AVAILABLE COLUMN You can select what column to see in SERPANALYZER. You can set the column to see by selecting Add Column in SERPANALYZER
Page 6 of 35 SERPANALYZER SEND TO You can use SERPANALYZER to send the website to the following: 1. Backlink Checker 2. Page Content Helper 3. Rank Tracker Competition To use send to: 1. Click the Selected column of the grid that you want to send to. 2. Click send to 3. Then select either Backlink Checker, Page Content Helper or Rank Tracker Competition
Page 7 of 35 SERPANALYZER REGENERATE DIFFICULTY RATING Using SERPANALYZER you can know if specific keyword is easy or difficult to dominate using values from the SERPANALYSER COLUMN and SERPATTACKS default formula. To regenerate the difficulty rating do the following: 1. Search for a specific keyword. 2. Then click Regenerate Difficulty Rating 3. To see the Detail of how the rating has been computed, click View Details
Page 8 of 35 KEYWORD RESEARCH Is used to research keyword that you can use to dominate the search engine result. Keyword Research has the following module 1. Keyword Finder (used to get keyword niche) 2. Amazon Product (used to get the available product) 3. Click Bank ( used to get the data in click bank website) 4. Domain Finder (used to get the available domain )
Page 9 of 35 KEYWORD FINDER To use keyword finder do the following: 1. Add Google Ad Word account if there is no account added yet ( Adding Google Ad word account will be discussed below) 1. Enter keyword 2. Set Result Count (can be either 50, 100 other counts is for pro version) 3. Set Country 4. Set Match Type it can be Broad Match, Exact Match, Phrase Match (Match type will be discussed below). For free version available only is Broad Match 5. Click Fetch Keyword Add Filter Button - You can click Add Filter if you want to narrow down the search result. You have an option to use either Filter by Search Count or Filter by Keywords. Remove Selected Button - You can remove a keyword you don t need by checking the selected checkbox in the grid and clicking Remove Selected Button.
Page 10 of 35 KEYWORD FINDER ADD GOOGLE ADWORD ACCOUNT At first start of keyword finder it will prompt you if you don t have a Google Ad Word account setup. You can also access Google account in Setting Menu>>Google Ad Word Account. To Add/Edit Google Ad word Account do the following: 1. Click Add/Edit 2. Type the username and password in the dialog box that will appear. 3. Click OK. 4. Click Save. To Delete an account do the following: 1. Select the account to delete in the grid. 2. Click Delete. 3. Click Save. You can add as many Google Ad word account as you want. To change the default account select the account in the grid then click Use Selected Account.
Page 11 of 35 KEYWORD FINDER MATCH TYPE In Keyword Finder there are 3 types of match type: 1. Broad Match - Is an important keyword match type not only because it reaches the widest audience, but also because this is the type that your ad defaults to. With broad match, your ad will appear whenever a user queries any word in your key phrase, in any order. For example, if you use broad match on "luxury car", your ad will be displayed if a user types "luxury car", "fastest car", and "luxury apartments". 2. Exact Match - Is the most specific of the keyword match types. With this match type, users will only see your ad when they type your exact key phrase by itself. For example, if you re key phrase was "black cocktail dress", your ad would only show up when a user searched for "black cocktail dress", and not for "cocktail dress", "black dress", or "expensive black cocktail dress". Users who click on your ad when searching that exact phrase are more likely to be interested in your product or service, but you will have less traffic as a result of your restrictions. 3. Phrase Match - Offers some of the versatility of broad match, but introduces a higher level of control. Your ad will only appear when a user queries your key phrase using your keywords in the exact order you enter them. For example, if your key phrase was "pet supplies", your ad would appear when a user searched for "pet supplies", "discount pet supplies", or "pet supplies wholesale", but not "pet food", "pet bird supplies", or "art supplies". Since the query can contain text before or after your keywords, there is some flexibility, but you are leaving a lot of traffic on the table.
Page 12 of 35 KEYWORD FINDER COLUMN LINKS Keyword Finder has 7 column links: 1. Keyword - Once clicked will search the keyword again to drill down the keyword results. 2. Google Search Result - Once clicked will fetch the Google search result counts. 3. Kei - Once clicked will fetch Kei (Keyword Effectivity Index) - Formula of Kei is local monthly search ^2/Google Search Result. You can further research in Google to know more about Kei. 4. Google Trend - Once clicked will display the keyword trend. From here you can see if the keyword has a good trending or not. A steady rise of graph means there is a good trending for that keyword. 5. Amazon - Once clicked will display the products available in Amazon for a specific keyword selected. 6. Click Bank - Once click will display all the product available in Click Bank for a specific keyword selected 7. Domain Finder - Once click will display all the available domain and suggested domain for a specific keyword selected.
Page 13 of 35 AMAZON PRODUCTS To search for Amazon products do the following: 1. Enter keyword 2. Select Result Count 3. Click Fetch Products
Page 14 of 35 CLICK BANK To Search in Clickbank do the following: 1. Enter Keyword 2. Set the result count 3. Click Fetch ClickBank
Page 15 of 35 DOMAIN FINDER To search in domain finder do the following: 1. Enter keyword 2. Click Fetch Domain From here you can see the Available domain (upper grid) and the Suggested Similar Domain ( lower grid )
Page 16 of 35 RANK TRACKER Is used to monitor you website and competitor website rank. To monitor website rank do the following: 1. Create a project (discuss in detail below) 2. Load the project 3. Select Search Engine 4. Click Check Rank 5. Click Save Result (only if you want to put the result in history)
Page 17 of 35 RANK TRACKER ADD/EDIT PROJECT To add or edit Project do the following: 1. Click Project Action 2. Select New Project or Edit Project 3. Enter Project Name 4. Enter Project Url 5. Set Search Depth 6. Set Search Engine Countries 7. Set Keyword List 8. Enter Competitor Urls 9. Click Save
Page 18 of 35 RANK TRACKER PAGE RANK GRAPH REPORT To used the pagerank graph do the following: 1. Click Reports in Rank Tracker 2. Select Page Rank Graph 3. Select Url 4. Select Search Engine 5. Select Keywords 6. Select Saved Dates 7. Click Generate Graph
Page 19 of 35 RANK TRACKER PAGE RANK HISTORY REPORT To used the Page Rank History Report do the following: 1. Click Report in Rank Tracker 2. Select Page Rank History 3. Select Saved Dates (you can only select one saved Date) 4. Click Generate Report
Page 20 of 35 RANK TRACKER COMPETITION HISTORY REPORT To used the Competition History Report do the following: 1. Click Report in Rank Tracker 2. Select Competition History 3. Select Saved Dates (you can only select one saved Date) 4. Click Generate Report
Page 21 of 35 BACKLINK CHECKER Is used to analyze backlink and other information of a website. To use backlink checker do the following: 1. Enter website 2. Select Search Engine 3. Click Fetch BackLink
Page 22 of 35 BACKLINK CHECKER PAGE RANK COUNT To count all PageRank do the following: 1. Click Count All Page Rank To count only Selected PageRank do the following: 1. Select Selected Column in BackLink Grid 2. Then click Count Selected
Page 23 of 35 BACKLINK CHECKER IP ADDRESS COUNT To count all IP do the following: 1. Click Count All IP To count only Selected IP do the following: 1. Select Selected Column in BackLink Grid 2. Then click Count Selected
Page 24 of 35 BACKLINK CHECKER ANCHOR COUNT To count all Anchor do the following: 1. Click Count All Anchor To count only Selected Anchor do the following: 1. Select Selected Column in BackLink Grid 2. Then click Count Selected
Page 25 of 35 BACKLINK CHECKER TLD COUNT To count all TLD do the following: 1. Click Count All TLD To count only Selected TLD do the following: 1. Select Selected Column in BackLink Grid 2. Then click Count Selected
Page 26 of 35 PPC FETCHER Is used to fetch all google ads and get other ad information. To fetch ads do the following: 1. Create Project (discuss in detailed below) 2. Load the project 3. Click Fetch Ads
Page 27 of 35 PPC FETCHER ADD/EDIT PROJECT To add or edit Project do the following: 1. Click Project Action 2. Select New Project or Edit Project 3. Enter Project Name 4. Add Keyword List 5. Click Save
Page 28 of 35 PPC HISTORY REPORT To used the PPC History Report do the following: 1. Click Report in PPC Fetcher 2. Select PPC History 3. Select Saved Dates (you can only select one saved Date) 4. Click Generate Report
Page 29 of 35 PPC ADS BY KEYWORDS REPORT To used the PPC Ads By Keywords Report do the following: 1. Click Report in PPC Fetcher 2. Select PPC Ads By Keywords 3. Select Saved Dates (you can only select one saved Date) 4. Click Generate Report
Page 30 of 35 PPC ADS BY DOMAIN REPORT To used the PPC Ads By Domain Report do the following: 1. Click Report in PPC Fetcher 2. Select PPC Ads By Domain 3. Select Saved Dates (you can only select one saved Date) 4. Click Generate Report
Page 31 of 35 PAGECONTENT HELPER Is used to analyze the website content. This way you can easily analyze the website content and see the weak points and advantages in your website and competitor s website. To analyze website content do the following: 1. Create Project (discuss in detailed below) 2. Load the project 3. Click Analyze Contents
Page 32 of 35 PAGE CONTENT HELPER ADD EDIT PROJECT To add or edit Project do the following: 1. Click Project Action 2. Select New Project or Edit Project 3. Enter Project Name 4. Enter Keyword 5. Enter Website List 6. Click Save
Page 33 of 35 PAGE CONTENT HELPER REPORT To used the Page Content Helper Report do the following: 1. Click Report in Page Content Helper
Page 34 of 35 ROTATING PROXY Is used to add proxy server in SERPATTACK. Once one proxy fail it automatically select another proxy that will work that is why it is called rotating proxy. To add rotating proxy click Setting Main Menu then a dialog box of rotating proxy will appear (adding proxy will be discuss in detail below).
Page 35 of 35 ADDING/UPDATE ROTATING PROXY To add/edit Rotating Proxy do the following: 1. Click Add/Edit 2. Enter Host/IP, Port, Username, Password in the dialog that will appear 3. Click Save To import proxy do the following: 1. Click Import proxy 2. Click Select File 3. Click Import Proxy 4. Click Save Note: The format of proxy is IP:Port:Username:Password (e.g. 192.168.0.0:80:Username:Password), you can also enter the proxy in the textbox manually. You can test the proxy if it s connecting if you click Test Proxy. Only successfully tested proxy will be used. Make sure all proxy passes the test. We recommend getting your proxy from YourPrivateProxy.com (http://www.yourprivateproxy.com/625.html ) because they have the fastest proxy connection