Optical Fiber Product Guide

E Optical Fiber Product Guide Optical Fiber Connectivity Page OPTI-JACK Fiber Optic Connector Module Single-Mode and Multimode Jacks and Plugs......... E4 Technical Information.............................. E5 Optical Fiber Termination Kit........................E6 OPTI-JACK Fiber Connector Termination Sequence.... E7 ST and SC Single-Mode and Multimode Connectors..... E8 OPTI-JACK Optical Fiber Patch Cords.............. E9 ST and SC Optical Fiber Patch Cords................ E0 MINI-COM Network Cabling System (See page B) MINI-COM Multi-Media Fiber Outlets.......... B27-B28 MINI-COM Fiber Outlet Kit....................... B28 MINI-COM Sloped Executive Series Faceplate Kit..... B3 MINI-COM Sloped Designer Series Faceplate Kit......B9 MINI-COM SC Duplex Fiber Optic Adapter Module.... B35 MINI-COM ST Fiber Optic Adapter Module.......... B35 MINI-COM Blank Module........................ B37 Closet Cabling Solutions (See page D) Fiber Optic/Multi-Media Interconnect Trays............ D25 Fiber Optic/Multi-Media Interconnect Drawers......... D26 OPTICOM Optical Fiber/Multi-Media Rack Mount Enclosures............................... D27-D28 OPTICOM Optical Fiber/Multi-Media Wall Mount Enclosures...................................D29 Fiber Optic and Milt-Media Panels.................. D30 FIBER CONNECTIVITY SOLUTIONS FIBER-DUCT Optical Fiber Routing System (See page F) PANDUCT Slotted Wall Wiring Duct............... F7 PANDUCT Solid Wall Wiring Duct.................. F7 FIBER-DUCT Fiber Optic Fittings................. F3-F6 Mounting Brackets............................. F8-F9 PAN-WAY Type LDP Surface Raceway System (See page H) PAN-WAY Type LDP Surface Raceway.............. H PAN-WAY " Bend Radius Fittings............. H20-H2 PAN-WAY Low Voltage Junction Boxes and Faceplates.................................J-J3 PAN-WAY Type LD2P Surface Raceway System (See page H) PAN-WAY Type LD2P Surface Raceway............. H24 PAN-WAY Multichannel Fittings...................H25 PAN-WAY Faceplates and Divided Junction Boxes. J4, J8-J9 PAN-WAY Type T-70 Surface Raceway System (See page K) PAN-WAY Type T-70 Surface Raceway............... K9 PAN-WAY T-70 Fittings.......................K0-K PAN-WAY Designer Series Snap-On Bezels and Faceplates........................... K26-K27 PAN-WAY Type Twin-70 Surface Raceway System (See page K) PAN-WAY Type Twin-70 Surface Raceway........... K8 PAN-WAY Type Twin-70 Fittings............... K9-K2 PAN-WAY Designer Series Snap-On Bezels and Faceplates............................ K26-K27 For Technical Assistance, call: 888-506-5400, Ext. 694 E

Panduit continues to set the standard in fiber connectivity: Single-Mode OPTI-JACK Fiber Optic Connectors Multimode OPTI-JACK Connectors in a variety of colors OPTI-JACK Multimode Plug-to-Plug Adapters Multimode and Single-Mode ST and SC style Connectors Replacement ferrules for OPTI-JACK Multimode Connectors E2 For Technical Assistance, call: 888-506-5400, Ext. 694

The OPTI-JACK Fiber Connector Module The OPTI-JACK Fiber Optic Connector Module is the next generation in fiber connectivity combining the look, feel and ease of use of the familiar RJ-style copper connector with the proven performance of ST/SC ferrule technology. Its patented FJ interface allows for higher density fiber installations than are possible with older ST and SC connectors, saving rack space and equipment expense. OPTI-JACK Fiber Optic Connectors in single-mode and multimode versions can be implemented in backbone, horizontal and work area cabling environments, providing exceptional versatility and true endto-end connectivity. This connector interface is defined by the TIA FOCIS-6 (Fiber Jack) intermateability specification and complies with all of the performance requirements specified in TIA-568-A and ISO/IEC 80. Key Features of the OPTI-JACK Fiber Optic Connector Module FEATURES Single-mode capability Mechanical strength and safety Acceptance proven by users RJ-45 form factor Terminable in field or factory BENEFITS Meets a key requirement of TIA-568-A. Provides flexibility of use in high-bandwidth, high data rate applications such as backbone cabling. No bare or loose fibers. Fibers are totally encased in ferrules to protect end users in fiber-to-the-desk environments and guard against inadvertent network outages. Builds upon two de facto standards proven ST/SC ferrule technology and the RJ-45 form factor. The preferred choice of end users, systems integrators, installers and standards bodies, as evidenced by successful implementations world-wide. Doubles the port density compared to ST/SC connectors. Maintains investment in cable management products. Mounts flush in patch panels, outlets and faceplates. Allows the flexibility to make moves, adds and changes in the network topology on-site, as needed. Uses commonly available tools. Reduces costs and simplifies inventory management compared with factory terminated cabling assemblies. FIBER CONNECTIVITY SOLUTIONS Connectors mount flush with faceplates, surface mount boxes and patch panels for a low profile, aesthetically pleasing installation. * ST is a trademark of Lucent Technologies Smaller size doubles the available port density compared to duplex SC or ST connectors. Fiber connector modules can be interchanged with copper connectors because they use the same RJ-45 form factor and modularity. For Technical Assistance, call: 888-506-5400, Ext. 694 E3

EOPTI-JACK Fiber Optic Connector Modules FJJGS9C FJPGS9C No. of Module Spaces Color OPTI-JACK Fiber Optic Connector Module - Single-Mode Jack FJJGS9CBU Includes jack housing, cover, two ferrule assemblies, two crimp sleeves, two boots for 900 µm tight-buffered fiber, two boots for 3 mm jacketed fiber and one dust cap. To comply with industry standards the cover and boots are blue for all singlemode connectors. Qty NOTE: FJJGS9CBU and FJPGS9CBU also available in packages of 00 pcs. To order, add suffix -C to end of part number. NOTE: Designed for use with 9/25µm single-mode fiber. Blue 0 OPTI-JACK Fiber Optic Connector Module - Single-Mode Plug FJPGS9CBU Includes plug housing, two ferrule assemblies, two crimp sleeves, one plug boot and two dust caps. To comply with industry standards the plug housing is blue for all single-mode connectors. Blue 0 FIBER OPTIC CONNECTOR MODULES FJJGM5C FJPGM5C FJPFRL-X FJJFRL-X No. of Module Spaces Color OPTI-JACK Fiber Optic Connector Module - Multimode Jack FJJGM5CIW FJJGM5CEI FJJGM5CWH FJJGM5CBL FJJGM5CBU FJJGM5COR NOTE: FJJGM5CEI and FJPGM5CEI also available in packages of 00 pcs. To order, add suffix -C to end of part number. NOTE: Designed for use with 62.5/25µm, 50/25µm multimode fiber. Qty OPTI-JACK Fiber Optic Connector - Multimode Replacement Ferrules FJPFRL-X FJJFRL-X OPTI-JACK Plug to Plug Multimode Adapter Module FJGCCEI Includes jack housing, cover, two ferrule assemblies, two crimp sleeves, two boots for 900 µm tight-buffered fiber, two boots for 3.0 mm jacketed fiber and one dust cap. To comply with industry standards, the cover and boots are electric ivory for all multimode connectors. Replacement ferrule and crimp sleeve for multimode plug. Replacement ferrule and crimp sleeve for multimode jack. Adapter to mate two OPTI-JACK Fiber Optic Connector Multimode Plugs. Used for the calibration of test cables and equipment and for OPTI-JACK plug-to-plug cross connects. Includes two dust caps. (Not for use in MINI-COM Surface Mount Boxes.) Off White Elec. Ivory White Black Blue Orange OPTI-JACK Fiber Optic Connector Module - Multimode Plug FJPGM5CIW FJPGM5CEI FJPGM5CWH FJPGM5CBL FJPGM5CBU FJPGM5COR Includes plug housing, two ferrule assemblies, two crimp sleeves, one plug boot and two dust caps. To comply with industry standards, the plug housing is electric ivory for all multimode connectors. Off White Elec. Ivory White Black Blue Orange Qty 0 0 0 0 0 0 0 0 0 0 0 0 0 50 0 E4 For Technical Assistance, call: 888-506-5400, Ext. 694

0.0 0.2 0.4 0.6 0.8.0 0.0 0.2 0.4 0.6 0.8.0 E OPTI-JACK Fiber Optic Connector Modules Technical Data All OPTI-JACK multimode and single-mode connectors are compliant with TIA-568 fiber connector performance requirements. Terminate with commonly available tools. Fiber Compatibility:62.5/25 µm and 50/25 µm multimode; 9/25 µm single-mode Percent of Test Sample OPTI-JACK TM Insertion Loss Single-Mode (FOTP-34) Test Series Avg: < 0.9 db Percent of Test Sample Fiber Cable Types: Insertion Loss: Return Loss: OPTI-JACK 3.0 mm jacketed or 900 µm tight-buffered <0.3 db typical >20 db multimode >40 db single-mode TM Insertion Loss Multimode (FOTP-34) Test Series Avg: < 0.5 db FIBER OPTIC MODULES TECHNICAL DATA 0 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Insertion Loss (db) 0 0. 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 Insertion Loss (db) TIA 455 IEC OPTI-JACK Multimode Fiber Optic Connector Performance Bellcore 326- CORE Test procedure and Required performance OPTI-JACK Performance B 4.4.3.2 Flex Apply.lb load thru 80 for 00 cycles; No additional loss <0.3 db additional loss 2B 4.5. 4.4.3.7 Impact Drop 8 times from 8ft (2.46m), 8 times from 6 ft (.82m); No additional loss <0.3 db additional loss 3A 4.5.22 4.4.2.2 Thermal Cycling -40 C to +65 C for 5 cycles; <0.3dB additional loss <0.3dB additional loss 4B 4.5.8 4.4.2. High Temperature 70 C for 4 days; <0.3dB additional loss <0.4dB additional loss 5A 4.4.9 4.4.2.3 Humidity 55 at 95% RH for 4 days; <0.3dB additional loss No additional loss 6B 4.5.4 4.4.3.4 Cable Retention Apply 5lb. load for 5 seconds, 0 angle; No additional loss <0.3 db additional loss A 4.5. 4.4.3. Vibration 0-55Hz, 2 hours each axis; <0.3dB additional loss <0.dB additional loss 3 4.4.,2 3.4,3.5 Visual, Mechanical Inspection and mechanical dimensions FOCIS-6 compliant 2A 4.5.32 4.4.3.8 Durability Mate/unmate connectors (500 cycles) <0.3dB additional loss No additional loss 34 4.4.7 4.4 Insertion Loss Test insertion loss using cut-back method; <0.3dB typical loss 0.75 db maximum loss 36B 4.5.5 4.4.3.3 Twist Apply 3.3 lb. load, 0 cycles from +90 to -90 ; No additional loss <0.3 db additional loss 7A 4.5.22 Temperature Shock 40 cycles from -20 C to+65 C; <0.5dB additional loss <0.3 db additional loss 85 4.5.6 Coupling Strength Pull plug from jack, 25 lb. load for 60 seconds; No additional loss <0.3 db additional loss, 0.75 db maximum loss 88 4.5.7 Low Temperature -25 C for 4 days; <0.3 db additional loss No additional loss NOTE: Above tests performed on 3.0mm jacketed fiber cable. Contact factory for additional specifics on single-mode connector performance. For Technical Assistance, call: 888-506-5400, Ext. 694 E5

Optical Fiber Termination Kit OPTICAL FIBER TERMINATION KIT The Fiber Optic Termination Kit contains all of the components you need for proper field termination of OPTI-JACK Fiber Optic Connector Modules. The lightweight case travels easily to the job site and keeps all of your tools and consumables organized. The Fiber Optic Termination Kit contains all of the items listed below. All items can also be purchased separately. No electricity required for termination Fast acting adhesive Proven, reliable polishing procedure Termination method protects fiber from damage and moisture and ensures accurate alignment Kit provides consumables for terminating up to 00 connectors Non-Consumables CST-5 Fiber Cable Jacket Stripper FALC Alcohol Bottle FBFSP Fiber Cable Buffer Stripper FBFSPM* Alternative Fiber Cable Buffer Stripper FCRP FJ Connector Crimp Tool FCRP4* Universal Crimp Tool (hex sizes:.28,.5,.78,.23) FCVR Fiber Cleaver FGLS Safety Glasses FKC Fiber Cable Strength Member Cutter FKCS Empty Carrying Case (for FJKITG) FPAD Fiber Polishing Pad FSCDVR Screwdriver FSCP Fiber Inspection Microscope FTWZR Tweezer FWBTL Water Bottle Fiber Optic Termination Kit FJKITG FJKITG-RFB Includes all consumable and nonconsumable items in the standard package quantities listed below with the following exceptions: quantity one FJPKG (Fiber Polishing Puck), no FCRP4 (Universal Crimp Tool) and no FBFSPM (Alternative Fiber Cable Buffer Stripper). Consumables refurbishment kit. Includes all consumable items listed below in the same quantities as FJKITG. Consumables * Not included in FJKITG or FJKITG-RFB ** Only one piece included in FJKITG and FJKITG-RFB Kit Kit FJPKG-X** Fiber Polishing Puck (Multimode GOF) 0 FJPMR Primer (50ml) FJPXY Anaerobic Adhesive (0ml) FPP-L µm Polishing Paper (AL 2 O 3 ) 50 FPP5-L 5µm Polishing Paper (AL 2 O 3 ) 50 FSWB-C Cleaning Swabs 00 FST Safety Stickers for fiber scraps FSYR-X Syringes with Needle Tips 0 FWP-C Cloth Wipes 00 PFX-0 Indelible Ink Marking Pen 2 PN07 OPTI-JACK Single-Mode Instruction Sheet PN77 OPTI-JACK Multimode Instruction Sheet PN78 OPTI-JACK Fiber Cable Stripping Tem plate Call for single-mode termination tooling and instructions E6 For Technical Assistance, call: 888-506-5400, Ext. 694

OPTI-JACK Fiber Connector Termination Sequence Always take safety precautions when terminating glass optical fiber cable. Wear safety glasses Never look into the end of a fiber which may have a laser coupled to it. Laser light can damage your eyes.. Slide on boot and plug housing. 2. Prepare cable jacket, aramid yarn, crimp sleeves and buffer. Plug Termination Make sure work area is properly ventilated Properly discard scraps of bare fiber 3. Dispense adhesive until a small bead forms on front of ferrule. 4. Dip bare fiber into primer. FIBER CONNECTOR TERMINATION SEQUENCE 5. Install fiber into rear of ferrule assembly. 6. Crimp both sleeve ends. 7. Cleave the fiber. 8. Polish. Jack Termination. Slide on boots. 2. Prepare cable jacket, aramid yarn, crimp sleeves and buffer. 3. Dispense adhesive until a small bead forms on front of ferrule. 4. Dip bare fiber into primer and install into rear of ferrule assembly. 5. Crimp both sleeve ends. 6. After cleaving the fiber, polish. 7. Slide boots over crimp sleeves and insert ferrule assemblies into cap. NOTE: Above sequence is for illustrative purposes only. Detailed termination instructions are supplied with each carton of product or can be ordered separately (request Instruction Sheet PN77). 8. Align cover over housing, slide and click into place. For Technical Assistance, call: 888-506-5400, Ext. 694 E7

ST and SC Fiber Optic Connectors The new ST* and SC Fiber Optic Connectors are field installable with the same easy to use adhesive and polishing procedures as the OPTI-JACK Fiber Optic Connectors. These components use a pre-radiused zirconia ceramic ferrule to ensure consistent end face geometry and high performance connector mating. They have been designed to comply with all relevant fiber connector standards and are completely compatible with all other ST (TIA FOCIS-2) and SC (TIA FOCIS-3) components. Both connectors are available in single-mode and multimode versions. Compliant with TIA-568 performance requirements Terminable with commonly available tools Fiber Compatibility: 62.5/25 µm and 50/25 µm multimode; 9/25 µm single-mode Fiber Cable Types: 3.0 mm jacketed or 900 µm tight-buffered Insertion Loss: <0.34 db typical >20 db multimode Return Loss: >40 db single-mode ST AND SC FIBER OPTIC CONNECTORS FSTM FSTS FSCMBBL FSCSBBU Part Number ST Multimode Connectors FSTMBL FSTMRD SC Multimode Connectors FSCMBL FSCMBBL FSCMRD Includes connector body/ferrule assembly, crimp sleeve, one black boot for 900µm tight-buffered fiber, one black boot for 3mm jacketed fiber and one black dust cap. Includes connector body/ferrule assembly, crimp sleeve, one red boot for 900µm tight-buffered fiber, one red boot for 3 mm jacketed fiber and one black dust cap. ST Single-Mode Connectors FSTSBU Includes connector body ferrule assembly, crimp sleeve, one blue boot for 900µm tight-buffered fiber, one blue boot for 3mm jacketed fiber and one yellow dust cap. Includes connector housing, ferrule assembly, crimp sleeve, one black boot for 3mm jacketed fiber and one black dust cap. Includes connector housing, inner housing, ferrule, spring, one black boot for 900µm tight-buffered fiber and one black dust cap. Includes connector housing, ferrule assembly, crimp sleeve, one red boot for 3mm jacketed fiber and one black dust cap. Boot Color Qty Black 0 Black 0 Red 0 FSCMBRD Includes connector housing, inner housing, ferrule, spring, one red Red 0 boot for 900µm tight-buffered fiber and one black dust cap. NOTE: To comply with industry standards, the connector housing is beige for all SC multimode connectors. SC Single-Mode Connectors FSCSBU Includes connector housing, ferrule assembly, crimp sleeve, one blue boot for 3mm jacketed fiber and one yellow dust cap. Black 0 Red 0 Blue 0 Blue 0 FSCSBBU Includes connector housing, inner housing, ferrule, spring, one blue Blue 0 boot for 900 µm tight-buffered fiber and one yellow dust cap. NOTE: To comply with industry standards, the connector housing is blue for all SC single-mode connectors. NOTE: Refer to page B35 for ST and SC Adapters. * ST is a trademark of Lucent Technologies E8 For Technical Assistance, call: 888-506-5400, Ext. 694

OPTI-JACK Optical Fiber Patch Cords These patch cords feature the OPTI-JACK fiber optic plug and jack. They are constructed from high performance, 62.5/25 µm multimode cable. They provide quick and easy interconnection for all of your glass optical fiber patching requirements. Integral boots provide strain relief and help maintain consistent polarity. FJPN FJPFJ Length OPTI-JACK Duplex Plug to Unterminated End FJPN5MEI FJPN52MEI FJPN53MEI FJPN50MEI 62.5/25 µm glass optical fiber cable with one OPTI-JACK duplex plug on one end and no connector on the other end. Meter 0 Meters 0 0 0 0 PATCH CORDS OPTI-JACK Duplex Plug to OPTI-JACK Duplex Plug FJJN FJPFJ5MEI FJPFJ52MEI FJPFJ53MEI FJPFJ50MEI 62.5/25 µm optical fiber cable with one OPTI-JACK duplex plug on each end. Meter 0 Meters 0 0 0 0 OPTI-JACK Duplex Jack to Unterminated End FJPJ FJJN5MEI FJJN52MEI FJJN53MEI FJJN50MEI 62.5/25 µm optical fiber cable with one OPTI-JACK duplex jack on one end and no connector on the other end. Meter 0 Meters 0 0 0 0 OPTI-JACK Duplex Plug to OPTI-JACK Duplex Jack FJPDSC FJJST FJPST FJPJ5MEI OPTI-JACK Duplex Plug to SC Plugs FJPDSC5MEI FJPDSC52MEI FJPDSC53MEI FJPDSC50MEI 62.5/25 µm optical fiber cable with one OPTI-JACK duplex plug on one end and two SC connectors (ceramic ferrules) on the other end. FJJST52MEI 62.5/25µm optical fiber cable with an OPTI-JACK duplex jack on one end and two ST connectors (ceramic ferrules) on the other end. OPTI-JACK Duplex Plug to ST Plugs FJPST5MEI FJPST52MEI FJPST53MEI FJPST50MEI 62.5/25 µm optical fiber cable with one OPTI-JACK duplex plug on one end and one OPTI-JACK duplex jack on the other end. OPTI-JACK Duplex Jack to ST Plugs 62.5/25 µm optical fiber cable with one OPTI-JACK duplex plug on one end and two ST connectors (ceramic ferrules) on the other end. ST is a trademark of Lucent Technologies Meter 0 Meter 0 Meters Meter 0 Meters 0 0 0 0 0 0 0 0 0 For Technical Assistance, call: 888-506-5400, Ext. 694 E9

ST and SC Optical Fiber Patch Cords Optical fiber patch cords are constructed from high performance, 62.5/25 µm multimode cable. They provide quick and easy interconnection for all of your optical fiber patching requirements. These patch cords are available with industry standard ST or SC simplex plugs and either polymer or ceramic ferrules. Integral boots provide strain relief and help maintain consistent polarity. Duplex patch cords have color coded boots to facilitate identification of the transmit and receive sides to speed installation. FPCST62SZ Simplex Optical Fiber Patch Cords - ST to ST Ferrule Type Length FPCST62SZM FPCST62SZ2M FPCST62SZ3M 62.5/25 µm optical fiber cable with one ST connector on each end. Meter 0 0 0 ST AND SC PATCH CORDS FPCST62DP FPCST62DZ FPCSC62SZ FPCSC62DZ Duplex Optical Fiber Patch Cords - ST to ST FPCST62DPM FPCST62DP2M FPCST62DP3M 62.5/25 µm optical fiber cable with two ST connectors on each end. Duplex Optical Fiber Patch Cords - ST to ST FPCST62DZM FPCST62DZ2M FPCST62DZ3M 62.5/25 µm optical fiber cable with two ST connectors on each end. Simplex Optical Fiber Patch Cords - SC to SC FPCSC62SZM FPCSC62SZ2M FPCSC62SZ3M 62.5/25 µm optical fiber cable with one SC connector on each end. Duplex Optical Fiber Patch Cords - SC to SC FPCSC62DZM FPCSC62DZ2M FPCSC62DZ3M 62.5/25 µm optical fiber cable with two SC connectors on each end. Polymer Polymer Polymer Meter Meter Meter Meter 0 0 0 0 0 0 0 0 0 0 0 0 FPCSTSC62DZ Duplex Optical Fiber Patch Cords - ST to SC FPCSTSC62DZM FPCSTSC62DZ2M FPCSTSC62DZ3M 62.5/25 µm optical fiber cable with two SC connectors on one end and two ST connectors on the other end. Meter 0 0 0 ST is a trademark of Lucent Technologies E0 For Technical Assistance, call: 888-506-5400, Ext. 694