FEATURES LIFT CYLINDER CONFIGURATION Standard IC: Features four fully interchangable cylinders Single Tire IC: Single stage lift cylinders are mounted to accept a single tire axle (optionalwithout derating capacity Dual Tire Axle: 3 stage lift telescopic cylinders designed for dual tire and steerable axles (optional) OUTSIDE RAIL HOIST Features an 8 x4 x1/2 Main Frame. Optional: Inside/ Outside Rail SEE THROUGH TRACK For improved visibility while loading/unloading container CONTAINER GUIDES (3/4 ) For added tail strength and short container STANDARD SAFETY FEATURES Body up light and hoist safety props Universal rear hold down winches Reflective safety tape CONTAINER LOCKS 5-point tie down system that meets DOT regulations AUTO FOLD ICC BUMPER Controlled folding bumper requires no linkage. Patented IC SERIES 60,000 lb. and 75,000 lb. capacity SPECIFICATIONS: Model ARO 60 22 IC ARO 75 22 IC ARU 60 22 IC ARU 75 22 IC Capacity 60,000 lb. 75,000 lb. 60,000 lb. 75,000 lb. Container Length 12-22 12-22 12-22 12-22 Dump Angle 48º 48º 48º 48º Operating Pressure 2,000 psi 2,000 psi 2,000 psi 2,000 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARO 60 22 IC 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. ARO 75 22 IC 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. ARU 60 22 IC 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. ARU 75 22 IC 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. OPTIONS: Bumper Non ICC bumpers, pintle hook plates Fenders Steel Diamond Plate, shock mount. Plastic Poly Fenders LED Lights Stop, turn, tail and marker lights featuring a plug-in wire harness 1
XT SERIES 60,000 lb. and 75,000 lb. capacity SPECIFICATIONS: Model ARO 75 22 XT ARU 75 22 XT Capacity 60,000 lb. 75,000 lb. Container Length 12-22 12-22 Dump Angle 48º 48º Operating Pressure 2,000 psi 2,000 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARO 75 22 XT 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. ARU 75 22 XT 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. FEATURES STANDARD FEATURES INCLUDE Industry leader in strength and durability Lift cylinder mounts provide inside and outside support Designed for less frequent and easier maintenance Suitable for tandem or tri axle chassis Available with fixed or extendable tail 5 point container locks exceed DOT requirements Optional automatic rear lock (patent pending) highlighted above CYLINDER CONFIGURATION Dual Tire or Steerable Lift Axle capable, forward lifting point optimizes torque BOLTABLE COMPONENTS Removable roller, cylinder and sheave pins FRAME PROFILES 3 different plate and tube configurations SEE THROUGH TRACK For better visibility and alignment 3/4 CONTAINER GUIDES For added tail strength and short container handling AUTOFLOAT BUMPER Controlled folding bumper requires no linkage Patented OPTIONS: Bumper Non ICC bumpers, pintle hook plates Fenders Steel Diamond Plate, shock mounted LED Lights Stop, turn, tail and marker lights featuring a plug-in wire harness. 2
FEATURES XS SERIES 60,000 lb. and 75,000 lb. capacity LIFT CYLINDER CONFIGURATION Can be configured to accept a single triaxle Optional 3 stage cylinders available for dual tire triaxle OUTSIDE RAIL HOIST Features an 10 x 4 x 1/2 Main Frame SEE THROUGH TRACK For improved visibility while loading/unloading container CONTAINER GUIDES (3/4 ) For added tail strength and short container CONTAINER LOCKS 5-point tie down system that meets DOT regulations STANDARD SAFETY FEATURES Body up light and Props Universal rear hold down winches Reflective safety tape SPECIFICATIONS: Model ARO 60 22 XS ARO 75 22 XS Capacity 60,000 lb. 75,000 lb. Container Length 12-22 12-22 Dump Angle 48º 48º Operating Pressure 2,000 psi 2,000 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARO 60 22 XS 176-180 CT 227 66,000 lb. 20K / 46K 2,750,000 in. lb. ARO 75 22 XS 176-180 CT 227 66,000 lb. 20K / 46K 2,750,000 in. lb. AUTO FOLD ICC BUMPER Controlled folding bumper requires no linkage. Patented OPTIONS: Bumper Non ICC bumpers, pintle hook plates Fenders Plastic Poly: Resist corrosion and damage LED Lights Stop, turn, tail and marker lights featuring a plug-in wire harness. 3
ARE EXTENDABLE TAIL 60,000 lb. and 75,000 lb. capacity SPECIFICATIONS: Model ARE 60 22 IC ARE 75 22 IC Capacity 60,000 lb. 75,000 lb. Container Length 12-22 12-22 Dump Angle 48º 48º Operating Pressure 2,000 psi 2,000 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARE 60 22 IC 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. ARE 75 22 IC 176-180 CT 230 66,000 lb. 20K / 46K 2,750,000 in. lb. FEATURES Dumps like a dump truck Makes towing a trailer easy The ability to dump into pavers Ideal for low overhead loading Can legally handle containers up to 22ft Tandem or Tri-axle configurations Structural tubing main frame 8 x 4 x 3/8 Structural tubing tail frame 7 x 3 x 1/2 Tubular subframe 4 x 3 x 1/4 ICC bumpers for 22ft containers HIGHLIGHTS Pintle hook capable for towing trailers (optional) 4
FEATURES Easier and faster installation Faster Cycle Times Lower Center of Gravity Outside Rail Design Low Installed Weight Fixed Cable Length Can handle container lengths up to 22 ARG 60/22 60,000 lb. capacity SPECIFICATIONS: Model ARG 60 22 Capacity 60,000 lb. Container Length 12-22 Dump Angle 50º Operating Pressure 3,000 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARG 60 22 176 CT 227 66,000 lb. 20K / 46K 2,750,000 in. lb. 5
ARL 12/20 12,000 lb. and 20,000 lb. capacity SPECIFICATIONS: Model ARL 12 ARL 20 Capacity 12,000 lb. 20,000 lb. Container Length 10-12 12-18 Dump Angle 48º 49º Operating Pressure 2,000 psi 2,000 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARL 12 108 CA 230 17,500 lb. 6K / 13.5K 1,000,000 in. lb. ARL 20 140 CA 236 26,000 lb. 8K / 18K 1,000,000 in. lb. FEATURES Palfinger is a heavy duty unit designed for long life and minimal maintenance. We can build the features you want into your hoist, and we can accomodate 12ft - 18ft container lengths. The ARL series is designed for 120-140 C.A. NON- CDL chassis. STANDARD FEATURES INCLUDE Designed for a single axle NON- CDL chassis with a 25,900 GVW Container lengths from 12ft - 16ft with 120 C.A. Strong tubular frame with subframe Single reeve cylinder for quick loading and unloading Unitized for quick mounting Dual front container locks Poly fenders LED: Stop, turn, tail and marker lights 6
FEATURES ARL 60/22 & ARL 60/22 ET 60,000 lb. capacity Dumps like a dump truck Makes towing a trailer easy The ability to dump into pavers Ideal for low overhead loading Can legally handle containers up to 22ft Tandem or Tri-axle configurations Structural tubing main frame 8 x 4 x 3/8 Structural tubing tail frame 7 x 3 x 1/2 Tubular subframe 4 x 3 x 1/4 ICC bumpers for 22ft containers SPECIFICATIONS: Model ARL 60 ARL 60 ET Capacity 60,000 lb. 60,000 lb. Container Length 12-22 12-22 Dump Angle 50º 50º Operating Pressure 3,000 psi 4,500 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARL 60 176 CT 227 66,000 lb. 20K / 46K 2,750,000 in. lb. ARL 60 ET 176 CT 227 66,000 lb. 20K / 46K 2,750,000 in. lb. HIGHLIGHTS Pintle hook capable for towing trailers (optional) 7
ARL 75/22 & ARL 75/22 ET 75,000 lb. capacity SPECIFICATIONS: Model ARL 75 ARL 75 ET Capacity 75,000 lb. 75,000 lb. Container Length 12-22 12-22 Dump Angle 50º 50º Operating Pressure 4,500 psi 4,500 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. RBM ARL 75 176 CT 227 66,000 lb. 20K / 46K 3,250,000 in. lb. ARL 75 ET 176 CT 227 66,000 lb. 20K / 46K 3,250,000 in. lb. FEATURES Dumps like a dump truck Makes towing a trailer easy The ability to dump into pavers Ideal for low overhead loading Can legally handle containers up to 22 ft Tri-axle configurations Structural tubing main frame 10 x 3 x 3/8 and equiped with a 1/4 x 2 wear strip Tubular subframe 4 x 3 x 1/4 8
FEATURES ARS 20 & 30 20,000 & 30,000 lb. capacity Designed for a single axle 33,000 GVW outside rail Container lengths from 12ft - 16ft with 120 C.A. Strong tubular frame with subframe Single reeve cylinder for quick loading and unloading Unitized for quick mounting Front container locks on both sides Poly fenders & LED stop, turn, tail and marker lights HIGHLIGHTS Structural tubing frame 8 x 4 x 3/8 Tubular subframe 4 x 3 x 1/4 Full width bumper with L.E.D. stop and turn lights 7 ¼ Reeve cylinder Lift axle capable available Optional extendable tail (3 length configurations) Pintle hook capable for towing trailers SPECIFICATIONS: Model ARS 20 20 ARS 30 16 ARS 30 16 ET ARS 30 18 Capacity 20,000 lb. 30,000 lb. 30,000 lb. 30,000 lb. Container Length 12-20 10-16 12-16 10-18 Dump Angle 49º 55º 55º 55º Operating Pressure 2,0000 psi 2,000 psi 2,000 psi 2,000 psi Model ARS 30 20 ARS 30 20 ET ARS 30 22 ARS 30 22 ET Capacity 30,000 lb. 30,000 lb. 30,000 lb. 30,000 lb. Container Length 10-20 12-20 10-22 12-22 Dump Angle 55º 55º 55º 55º Operating Pressure 2,000 psi 2,000 psi 2,000 psi 2,000 psi CHASSIS SPECIFICATIONS: Hoist Model CA/CT Platform Length GVWR F/R Susp. Min RBM ARS 20 20 168-172 CA 215 26,000 lb. 8K / 18K 1,000,000 in. lb. ARS 30 16 130-140 CA 173 33,000 lb. 12K / 21K 1,500,000 in. lb. ARS 30 16 ET 130-140 CA 173 33,000 lb. 12K / 21K 1,500,000 in. lb. ARS 30 18 150-160 CA 193 33,000 lb. 12K / 21K 1,500,000 in. lb. ARS 30 20 168-175 CA 211 33,000 lb. 12K / 21K 1,500,000 in. lb. ARS 30 20 ET 168-175 CA 211 33,000 lb. 12K / 21K 1,500,000 in. lb. ARS 30 22 186-192 CA 227 33,000 lb. 12K / 21K 1,500,000 in. lb. ARS 30 22 ET 186-192 CA 227 33,000 lb. 12K / 21K 1,500,000 in. lb. 9
ROLL RITE DC Series HIGH PERFORMANCE, LOW MAINTENANCE AUTO TARPERS Roll-Rite roll off tarp systems feature cylinder free and polished aluminum arm profiles resulting lower replacement and labour costs. FIT YOUR TRUCK ON A BUDGET Roll-Rite s patented sliding pivot (On selected DC-Series models) accommodates both new and old style roll-off and hook lift vehicles. Roll-Rite tarping systems are designed to fit the rugged and demanding needs of roll-off trucks and trailers. You can combine stationary and adjustable features on the DC-Series Tarp systems for any variation that best suits your budget and requirements. TARP OPTIONS DC100 ARMLESS For Trucks Using up to 30 feet of Tarp... TarpMaster Gear Motor w/ 98 Tarp Spool with Integrated Housing, Adjustable Tower Adjusts 60 to Height of 117, Super Tough Mesh Tarp, Tie-down Accessories & Hardware, Wireless Power Pack: Single Valve Hydraulic Pump w/black Box Remote Controls, 2 Keyfobs w/retractable Keyfob Clips Estimated System Weight: 535lbs DC203 For Trucks Using up to 26 feet of Tarp... External Pivot Set. TarpMaster 98 Tarp Spool with Integrated Housing, Adjustable Tower, Single Valve Hydraulic Pump w/ Black Box Remote Controls, 2 Keyfobs w/ Retractable Keyfob Clips, Wide Tarp Bow Set Estimated System Weight: 550lbs 10
DC350 SERIES TARPERS DC350 sliding pivot features all new spring-driven pivot with 6-springs in a narrow 3 profile For Trucks Varying Sized Containers Using up to 30 feet of Tarp... Patented Sliding Pivot Set. Super Duty Gear Motor with 98 Tarp Spool with Integrated Housing, Adjustable Tower, Super Tough Mesh Tarp, Wireless Power Pack with Black Box Remote Control 2 Keyfobs w/ Retractable Keyfob Clips, Wide Tarp Bow Set Estimated System Weight: 800lbs Tower Rests at height of average 20yd container and extends 36 (Integrated Housing) SUPER TOUGH MESH Premium 16 oz Heavy Weight Woven Mesh made of 7,500 denier strands of UV resistant polypropylene 7x7 weave breathes enough to minimize flapping UV protected strands Heavy duty 2 binder and seat-belt webbing front & rear to prevent fraying and tearing Pre-wired Black Box Wireless Control with Electric-over-Hydraulic Power Pack Versatile pivot range with 180º arm rotation. Gear-driven spring pivot combined with patented sliding mechanism allows 20 in. of travel to easily accommodate 20-, 30- and 40- yd containers. Narrow profile (above) meets 108 outside mounting requirements when mounted on outside of fender. PREMIUM HD MESH Premium 15 oz material features a 6x6 fully PVC coated weave with three-1300 denier high tenacity polyester threads that form a single 3900 denier strand Comparable tensile strength to our Super Tough mesh with less weight provides maximum performance for automated tarping demands 10X more puncture resistant than SuperTough means superior coverage appearance with less debris protrusions Heavy duty 2 binder and seat-belt webbing front & rear to prevent fraying and tearing 11
DC400 SERIES TARPERS Powder Coat Finished Tower Rests at height ofaverage 20yd container and extends 36 Pre-wired Black Box Wireless Control with Electric-over-Hydraulic Power Pack For Trucks with Similar Sized Containers Using up to 30 feet of Tarp... Patented Roller-Bearing Stationary Pivot Set. Super Duty 98 Tarp Spool with Integrated Housing, Adjustable Tower, Super Tough Mesh Tarp, Wireless Power Pack with Black Box Remote Control 2 Keyfobs w/retractable Keyfob Clips, Wide Tarp Bow Set Estimated System Weight: 600lbs SUPER TOUGH MESH Premium 16 oz Heavy Weight Woven Mesh made of 7,500 denier strands of UV resistant polypropylene 7x7 weave breathes enough to minimize flapping UV protected strands Heavy duty 2 binder and seat-belt webbing front & rear to prevent fraying and tearing Two 6-spring greasable Roller Bearing Stationary Pivots PREMIUM HD MESH 4 Halogen worklights are standard Premium 15 oz material features a 6x6 fully PVC coated weave with three-1300 denier high tenacity polyester threads that form a single 3900 denier strand Comparable tensile strength to our Super Tough mesh with less weight provides maximum performance for automated tarping demands 10X more puncture resistant than SuperTough means superior coverage appearance with less debris protrusions Heavy duty 2 binder and seat-belt webbing front & rear to prevent fraying and tearing 12
AVAILABLE OPTIONS Subframe flush mounted Optional Control Tower with air two lever controls, PTO switch and body up light 70 gallon hydraulic tank with side mounted brackets Larger 12 head sheave to improve cable life Dual front locks Pump with 2 ½ gear and a 2 suction line, and a T-Bolt clamp Universal cable hook Removable side roller pin, secured by single bolt 50 GPM valve separate control stand Subframeless hoist features less weight 60 gallon hydraulic tank mounted on tubular bracket with dual filters Full width rear roller reduces wear on tail 13
Hinge recessed into truck chassis, full width hinge shaft (1) piece construction Muncie Power Take Offs Optional Rear & Side Vew Safety Systems Optional Custom Radio Controls Optional Toolboxes Optional LED Lighting Interchangeable cable sheaves with high strength aluminum bronze bushings Dual spring loaded pull through front locks Removable side roller pin, secured by single bolt 50 GPM valve mounted on oil tank 14
NOTES 15
NOTES 16
NOTES 17
NOTES 18
BR-DP_PalfingerCblHst-0613-01