"X" for Express Testing



Similar documents
Special Claims Seminar

Cracking The Care Label Code. October 2013

Test Methods for the Colour Fastness of Leather & Dyes. TFL Leather Technology Ltd. Quality and Environment February 2004 Version 1.

GENERAL GUIDELINES AND TECHNICAL SPECIFICATIONS OF UNIFORM FABRICS FOR MGVCL EMPOLYEES FOR BLOCK YEAR

Specifications, Product Testing and Terminology

Ingeo Fibre Apparel Product Guidelines. Fiber to Fabric. 1. Introduction to Ingeo fibers 2. Fiber to yarn 3. yarn to fabric

MaxCell Technical Manual Design Parameters

CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C Date of issue , Updated July 1, 2011

GSI. Geosynthetic Institute GRI. 475 Kedron Avenue Folsom, PA USA TEL (610) FAX (610) GII GAI GCI. GRI Test Method GM21

EVALUATION OF THE CARE AND PERFORMANCE OF COMFORT STRETCH KNIT FABRICS. Introduction

Home Product Testing

EUROPEAN STANDARDS PERSONAL PROTECTIVE CLOTHING FOR FLAME RESISTANT. Alexander Gstettner, Lenzing AG Austria

COMMERCIAL ITEM DESCRIPTION CLOTH AND STRIP, LAMINATED OR COATED, VINYL NYLON OR POLYESTER, HIGH STRENGTH, FLEXIBLE

IS 3675 :1966 Re g cotton fibre By Flat Bundle Method Spinlab. Spinlab. Statex

Effect of Lycra Extension Percent on Single Jersey Knitted Fabric Properties

How To Work With Beads. By Rowan

Sika Membran System For Sealing and Waterproofing Construction Gaps in Building Façades

CARPET101. & The Commercial Specification. IIDA Course No AIA Course No. 00M-99

Construction. SikaProof A-08 Edge, A-12 Edge. Fully bonded FPO sheet membrane in L-shape for the SikaProof A waterproofing system. Product Description

THERMAL INSULATION MATERIALS TEST METHOD SELECTION LIST

TECHNICAL BULLETIN

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

SECTION GUARDA SECURITY WINDOW SCREENS

High Capacity Hot Air Dryer

TIPS ON SORTING TIPS ON STAIN REMOVAL TIPS ON WASHING

Section 5. Performance Testing Requirements

FLEX-WRAP Foam Pipe Wrap

1.02 DESCRIPTION A. This Section specifies furnishing and installing Cast in Place Detectable/Tactile Warning Surface tiles where indicated.

Textile: Colour Fastness. - Chlorinated Water - Dry Cleaning - Dry Heat - Hot Pressing - Laundering - Light. Textile: Physical

3M Dual Lock Reclosable Fastener

How To Label Clothing

Study on flame retardant properties of poly(lactic acid) fibre fabrics

T 549. WORKING GROUP CHAIRMAN N/A; reaffirmed SUBJECT RELATED

Apparel and Home Textiles Performance Standards Manual

How to Install Hardwood Flooring Over a Sub Floor

Annex of the certificate (Page 1/6) Accreditation Scope

Selecting a Carpet and Pad

Flocking of textiles. Flocked shirt 13. flocking drying cleaning. adhesive. application. creation

Chemical Finishing Slide 1

MICRO PLASTICS MOLDED NYLON 6/6 FASTENERS MECHANICAL TEST DATA - UNC - UNF SECTION

Division 9. SignaFlor Pad and Pour Flooring System

Product Guide Specification

Specification for Dope Dyed Polyester Viscose Uniform Cloth

Double Coated Urethane Foam Tapes

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS

MARTIN TESTING LABORATORIES (MTL) PAINTS AND COATINGS TESTING CAPABILITIES

SECTION PLAYGROUND SURFACING TILES

PAAM COMMERCIAL PRIVATE LIMITED

Section Polished Concrete Finishing. Vexcon

GRI-GT13(a) Specification Geotextile Separation for Roadways (ASTM Test Method Based)

SECTION FLUID APPLIED ROOFING (LIGHT TRAFFIC DECKS OVER CONCRETE)

SEWING MAINTENANCE CHECKLIST

Fiberglas, Exterior Wall Thermal Insulation

COATING & WRAPPING OF UNDERGROUND PIPING

NATIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA GB x Replaces GB Anti-static protective clothing

Keeping your Carpet Beautiful

TENCEL HIGH PERFORMANCE SPORTSWEAR

FS #40 Astro. Classic Rayon #40. Classic Rayon #60. Frosted Matt #40

Yarns. Definition of Yarn. Classification: * Types of Yarn. Yarns may be: In addition, Filament yarns may be: From fibers to yarns

Flexible Spill Containment Protecting You And The Environment

Standard Test Procedures Manual

Secondary Containment Comparison ATI Ultra COAT vs HDPE

1.4 Metallic Impurities Iron must not exceed 150 ppm and copper shall not exceed 6 ppm when tested according to TAPPI T 266.

Apr 17, 2000 LAB MANUAL

TECHNICAL DATA SHEET GRILON BG-15 S

Reflectex TM Reflective Concrete Interlayer Geotextile INSTALLATION GUIDELINES

Understanding BS EN 771-3: Aggregate concrete masonry units

Global Hybrid Roofing Solutions (Delaware) LLC

DRAINAGE MATS For Vertical: Flow 15-P For Horizontal: Flow 18-H

Kids Woven - Minimum Construction Standards

furnishings flammability characteristics

INC Flexi-Sorb. Versatile Flexible Easy To Install Durable Good Noise Reduction Economical. Typical Applications

3 Single-Coated Foam Tapes

Assembly Instructions MDM Products Party Tent

PORTICO CARPET WARRANTY BROCHURE

A. The shade structure contractor shall be responsible for the design, engineering, fabrication, and supply of the work specified herein.

A. Work on this project shall consist of, but is not limited to, the following:

Roofing. Sarnafil S EL. Polymeric membrane for roof waterproofing. Product Description

Polymeric membrane for roof waterproofing

1.5. UL flammability ratings. *Nylon 6.6 = Polyamide 6.6 is Halogen-free and Silicone-free.

Bafl-Sorb Sound Absorbing Ceiling Baffles

VC 104+ Rigid Grade / Rigid Grade Imagine VC 104 Rigid Grade Commercial Customised

AGRICULTURAL COVERING

Test report P 7013-E. InoPaz H2O. Pazkar LTD. Alon Tavor Industrial Zone AFULA / Israel. J. Magner Dipl.-Ing. N. Machill.

section rubber flooring page 1 of 7

Scotchgard Multi-Layer Protective Film 1004

Tunnels & Arches OLDROYD THE ULTIMATE WATERPROOF MEMBRANE SYSTEM

Treatment of a surface or structure to resist the passage of water in the absence of hydrostatic pressure. presence of hydrostatic pressure.

referenceguide Reference Guide for Pressure-Sensitive Adhesive Tapes great to work with

3 Dual Lock Reclosable Fasteners

Flame Resistant Protective Clothing Fabric CARE, USE and

A GUIDE TO HIGH PERFORMANCE POLYURETHANE UPHOLSTERY FABRICS

WATERPROOFING OF REINFORCED CONCRETE FLAT ROOF 12

Construction. 3-part thixotropic epoxy patching mortar. Product Description. Tests

SCREEN PRINTING INSTRUCTIONS

ENGINEERING SPECIFICATION PULTRUDED DYNARAIL FIBERGLASS LADDER & LADDER CAGES

SINCE 1947 IN THE VAN OF BUFFING MACHINES

Care Symbol Written Care Instructions What Care Symbol and Instructions Mean

Introduction: Consumables - Part of the Identification System

WORKING DRAFT OF COMMITTEE MEETING OUTPUT CONTENT NOT FINAL SUBJECT TO REVISION PRIOR TO LETTER BALLOT AND PUBLICATION OF SECOND DRAFT REPORT

Transcription:

Submit Samples to: Manufacturing Solutions Center Lab 0 Conover Station SE Conover NC 86 Please fill out items in BLUE Select the tests to perform; Enclose the correct number of samples Company Billing Contact ing Contact Billing Phone # ing Contact Phone # results will ONLY be sent to those emails listed here: "X" for Express ing Billing Address Billing Address Billing Address Jodi Geis, ing Lab Manager Phone: 88-7-7000 Ext.45 jgeis@manufacturingsolutionscenter.org **Please note: The bill will come from CVCC (Catawba Valley Community College) along with a copy of this Package Request Form. Please make checks payable to "CVCC". PO # if applicable If testing permits, some test methods can be performed in business days or less for double the cost. Express ing: Certain Antimicrobial ing can be performed in 5 business days or less for double the cost. Return ed Samples: Shipping fees apply& can be added to the invoice or provide: Carrier & Shipping Speed Account # Billing Account Zip Code Sample Style Number Sample Color Shipping Address if different from billing address Customer Will Pick Up Sock Size or Garment Size (if applicable) Sample Description Special Instructions For ANY laundering-aatcc Standard Ref. Detergent will be used unless otherwise specified: Laundering/Care Instructions Fiber Content Not supplying enough samples will only increase testing turnaround time. Please indicate face & selvage of fabric if applicable Date Received Date Completed Fiber Analysis, Identification & Construction of Fabric & Yarn Cones: Fiber/Yarn Questions? Contact Fiber Analysis Specialist Shane Lynch: 88-7-7000 Ext. 446 Fiber Content of a Yarn or Fabric in % Fiber Content of a Sock or Pantyhose in % Fiber Content of a Sock or Pantyhose in % (high pattern) Fiber Content Number Lab Tech Signature Unless otherwise specified, the latest publication of a test method is run. methods with older publication dates can be run if requested. AATCC 0 & 0A AATCC 0 & 0A AATCC 0 & 0A ASTM D69 Fiber Content CAN/CGSB-4. NO. 4-005 Fiber Content/Yarn Count/Construction for Entire Sock (approx. 8- yarn counts) (+$85.00) Specialty Fiber Microscopy/Cross Section $5/hr. AATCC 0 Yarn Count/Denier/Construction for Fabric - $.00 per yarn Yarn Number by the Skein Method (0 yard reeling) from Cone of Yarn Filament Count per Yarn Identified Description ASTM D059 & D60 ASTM D059 & D60 ASTM D907/D907M ASTM D059 & D60 Amount of Fabric /Garments to Send cone or / yard Socks Socks Socks Socks Socks yard Cone 40" of Yarn $85.00 $45.00 $5.00 $.00 $.00 s Form ID: M:\Customer Templates\ Package Request Form-Rev 9 04-8-6 Page of 7

Breaking Load (Strength) of Yarn by the Skein Method (0 yard reeling) ASTM D578 Cone Twist in Yarns by Direct Counting or Untwist/Retwist Method (Ply & Single) ASTM D4 Cone or yard $.00 Extractable Matter in Textiles: OPU%(Oil Pick Up%) MSC-07 Cone $.00 Single Yarn Strength & Elongation (Statimat) - Single Ply ASTM D56 cone $7.50 Single Yarn Strength & Elongation (Statimat) - Multi Ply ASTM D56 cone $55.00 Shrinkage of Yarns in Boiling Water ASTM D59 cone Shrinkage of Yarns in Dry Heat ASTM D59 cone Staple Length - Per Measurement ASTM D66 Modified $.00 Tensile Properties of Yarn - Single Strand Method (CRE Method) ASTM D56 cone $.00 Coefficient of Friction - Yarn to Solid Material ASTM D08 cone Spinning Type (OE, Ringspun, etc.) ASTM D888 Melting Point ASTM D76 Yarn Evenness/Unevenness ing ASTM D45 Modified cone $7.50 Picks Per Inch ASTM D775 /4 full width $6.50 Knit Fabric Count (Courses Per Inch & Wales Per Inch) ASTM D887 $6.00 Needle Count of a Sock MSC-0 Course Count of a Sock MSC-06 $7.50 Deconstructing Fabric into yarn form so that yarn testing can be performed $0 per hour Defect Analysis/Examination $5 per hour Antimicrobial/Antibacterial ing: $5.00 Anti-microbial Questions? Contact Antimicrobial Specialist Maria Curry: 88-7-7000 Ext. 45 Cost of Antimicrobial tests are based on the standard test method. Any modification or special request may increase the final cost. Antibacterial Finishes Accredited ISO/IEC 705 AATCC 00 (or 0 grams) $75.00 Antibacterial Finishes: Natick Clarification for ing for AATCC 00 Natick Spec (or 0 grams) Call for Info Natick Repeated Laundering Procedure (Wash/Dry Cycles) $6.00 Antibacterial Parallel Streak Accredited ISO/IEC 705 AATCC 47 (or 0 grams) $75.00 Antimicrobial Activity Accredited ISO/IEC 705 ASTM E49 (or 0 grams) $5.00 Additional Shake Time - Above hour (specify time to shake $5/hr.) for ASTM E49 Antibacterial Activity and Efficacy on Textile Products JIS L 90:008 (or 0 grams) $5.00 $75.00 Determination of Antibacterial Activity of Antibacterial Finished Products Textiles ISO 074:0 (or 0 grams) $75.00 Determining the Activity of Incorporated Antimicrobial Agents in Polymeric of Hydrophobic Materials ASTM E80 contact for instructions $45.00 Special/Other Antimicrobial Repeated Home Laundering (automated washer)-aatcc Liquid Detergent w/o Brightener AATCC 50 AHFA (American Home Furnishings Association) Upholstery/Furniture ing $4.00 Elongation - Woven Upholstery Fabric AHFA JIFS&G Ch. 0 yard full width $4.0 Colorfastness to Crocking AATCC 8; AHFA JIFS&G Ch. 5 yard full width $.00 Colorfastness to Water AATCC 07; AHFA JIFS&G Ch. 4 " x " $.00 Colorfastness to Solvent ASTM D597-6.7; AHFA JIFS&G Ch. 4 Colorfastness to Light - Option E AFU hours to expose: $.40 pr hour AATCC 6; AHFA JIFS&G Ch. 6 " x " " x " $6.50 $.40 Dimensional Stability To Water AHFA JIFS&G Ch. 9 yard full width $.0 Dimensional Stability To Solvent AHFA JIFS&G Ch. 9 yard full width $8.5 Break Strength and Elongation of Fabrics - Grab Accredited ISO/IEC 705 ASTM D504; AHFA JIFS&G Ch. 6 yard full width Wyzenbeek Abrasion - up to 5,000 double rubs Wyzenbeek Abrasion - 5,00 to 0,000 double rubs Using Foam Backing & Wire Screen Using Foam Backing & Wire Screen ASTM D457; AHFA JIFS&G Ch. yard full width $65.00 $8.50 Double Rubs past 0,000 are $.0 per each additional 5000 double rubs $.0 Pilling Resistance - Brush Pilling er ASTM D5 / yard Picks Per Inch (Yarn Count) ASTM D775; AHFA JIFS&G Ch. 5 /4 full width $6.50 Determination of Number of Threads Per Unit Length - Woven Fabrics CAN/CGSB-4. No. 6-0 /4 full width $6.50 Seam Break Strength and Seam Slippage-Failure in Sewn Seams ASTM D68; AHFA JIFS&G Ch. yard Tear Strength of Fabrics - Tongue Tear (Single Rip) - Woven and Knit ASTM D6; AHFA JIFS&G Ch. 5 yard Tear Strength of Fabrics - Trapezoid Procedure - Tricot Accredited ISO/IEC 705 ASTM D5587-08; AHFA JIFS&G Ch. 5 yard Fiber Migration AHFA JIFS&G Ch. 7 yard $5.00 Form ID: M:\Customer Templates\ Package Request Form-Rev 9 04-8-6 Page of 7

ACT (Association for Contract Textiles) Upholstery/Furniture ing Wyzenbeek Abrasion - ACT General Fabric up to 5,000 double rubs #0 Cotton Duck $65.00 Wyzenbeek Abrasion - ACT Heavy Duty Fabric 5,00 to 0,000 double rubs #0 Cotton Duck ASTM D457 - ACT yard full width $8.50 Double Rubs past 0,000 are $.0 per each additional 5000 double rubs $.0 Abrasion Resistance - Martindale Abrasion General Upholstery to 0,000 cycles (movements) ASTM D4966 - ACT / yard Abrasion Resistance - Martindale Abrasion Heavy Duty to 40,000 cycles (movements) ASTM D4966 - ACT / yard Wet & Dry Crocking - ACT guidelines for Upholstery, Wallcoverings or Drapery AATCC 8 - ACT Colorfastness to Light-Opt ACT - Upholstery AFU hours expose: 40 $.40 pr hour AATCC 6. - ACT Colorfastness to Light-Opt ACT - Wall Coverings AFU hours expose: 40 $.40 pr hour AATCC 6. - ACT Colorfastness to Light-Opt ACT - Drapery AFU hours expose: 60 $.40 pr hour AATCC 6. - ACT NFPA 70 - Drapery NFPA 70 TM - ACT Break Strength & Elongation - Upholstery Accredited ISO/IEC 705 ASTM D504 - ACT Break Strength & Elongation - Wrapped Panels & Upholstered Walls Accredited ISO/IEC 705 ASTM D504 - ACT " x " " x " " x " " x " 0 garments/ yd yard yard $.00 $56.00 $56.00 $84.00 Seam Slippage - Upholstery (Both Fabric Directions) ASTM D404 - ACT yard Seam Slippage - Drapery (Both Fabric Directions) ASTM D44 - ACT yard Colorfastness ing: Colorfastness to Chlorine Bleach AATCC/ASTM TS-00 $.00 Colorfastness to Chlorine Bleach AATCC 6 5A $.00 Colorfastness to Sodium Hypochlorite Bleach in Home Laundering AATCC 88 Colorfastness to Crocking AATCC 8 $.00 $.00 Colour fastness to Crocking/Rubbing ISO 05-X:00 $.00 Colorfastness to Crocking CAN/CGSB 4. No. -004 Colorfastness to Laundering - Accelerated Select with Option: A, B, A, A, 4A or 5A AATCC 6 $.00 $.00 Colour fastness to Laundering - Accelerated ISO 05 C-06:994 $.00 Colorfastness to Laundering - Accelerated CAN/CGSB 4. No. 9.-004 (#) Colorfastness After Actual Home Laundering AATCC/ASTM TS-007 Colorfastness to Light: Xenon-Arc - Option or E or 6. - $.40/hr. Exposure hrs. AATCC 6 e or or 6. or >"x" $.00 $.00 $.40 Colour fastness to Artificial Light - Xenon Arc Fading Lamp ISO 05-B0:994 $55.00 Colorfastness to Non-Chlorine Bleach AATCC/ASTM TS-00 $.00 Colorfastness to Non-Chlorine Bleach AATCC 7 $.00 Colorfastness to Perspiration - Acid Perspiration Solution Only AATCC 5 Acid Only 6"x6" Swatch (sock) $6.50 Colorfastness to Perspiration - Acid & Alkaline Perspiration Solution AATCC 5 Acid & Alkaline 6"x6" Swatch (sock) $.00 Colour fastness to Perspiration ISO 05-E04:994 6"x6" Swatch (sock) $7.50 Colorfastness to Perspiration CAN/CGSB 4. No. -M90 Colorfastness to Saliva DIN V 560-00 Colorfastness to Water AATCC 07 6"x6" Swatch (sock) 6"x6" Swatch (sock) $7.50 $6.50 $.00 Colour fastness to Water ISO 05-E0:00 6"x6" Swatch (sock) $.00 Colourfastness to Water CAN/CGSB-4. No. 0-M89 Colorfastness to Solvent Spotting: Perchloroethylene AATCC 57 6"x6" Swatch (sock) $.00 $6.50 Colorfastness to Solvent - Performance Specification for Woven Upholstery Fabrics AATCC 07; ASTM D597 $6.50 Colorfastness to Sea Water AATCC 06 Colorfastness to Water Spotting AATCC 04 Colorfastness to Perspiration and Light AATCC 5 6"x6" Swatch (sock) $.00 $.00 $8.50 Instrumental Color Measurement - Spectrophotometer AATCC EP6 Colorfastness: Dye Transfer in Storage; Fabric to Fabric - Option I (48 hour room temp test) AATCC 6 Option I 6"x6" Swatch (sock) $.00 Colorfastness: Dye Transfer in Storage; Fabric to Fabric - Option II (Accelerated 4 hour oven test) AATCC 6 Option II 6"x6" Swatch (sock) $.00 Colorfastness to Water: Chlorinated Pool AATCC 6 6"x6" Swatch Colorfastness to Actual Dry Cleaning AATCC Compression ing: 6"x6" Swatch (sock) $6.50 Compression - Setting (mmhg) Bolam Hatra Type BS 66:985/BS 756:999 modified 4 $0.5 Form ID: M:\Customer Templates\ Package Request Form-Rev 9 04-8-6 Page of 7

Durability ing: Abrasion Resistance - Fabric (Martindale er): Option = hole in knits or Option = ends break in wovens Up to 5,000 movements ASTM D4966 Option / yard Movements past 5,000 are $0 per each 5,000 movements / yard $0.00 Abrasion Resistance - Fabric (Martindale er): Option =change in shade/appearance ASTM D4966 Option Abrasion Resistance - Fabric (Martindale er): Option =mass loss as a percentage ASTM D4966 Option Abrasion Resistance - Fabric (Martindale er) - Specimen Breakdown ISO 947-:998 / yard / yard / yard Abrasion Resistance - Fabric (Martindale er) - Mass Loss Movements past 5,000 are $0 per each 5,000 movements ISO 947-:998 / yard / yard $0.00 Abrasion Resistance-Socks Straight Line Abrasion Sole of Foot (Need Sock Size) up to 0,000 cycles THA Martindale Abrasion Method Cycles past 0,000 are $5.00 each additional,000 cycles Socks $5.00 Abrasion Resistance Determination BS44-4: 990 Method 7A / yard $48.40 Applied Decorations 6 CFR 500.5-5 $.0 Burst Strength - CRE Method (for socks and hosiery) ASTM D6797 5 $.0 Burst Strength - Mullen Burst er ASTM D786/D786M 5 $.0 Pilling Resistance - Fabrics Thicker Than mm (Random Tumble Pill er) at 0 minutes ASTM D5/D5M or / yard $8.5 Resistance to Pilling - Random Tumble Pilling er CAN/CGSB-4. No. 5.-M87 or / yard Pilling Resistance - Fabrics Less Than mm (Martindale er) Circle to test: ORIGINAL STATE OR AFTER LAUNDERING (provide laundering instructions) ASTM D4970/D4970M yard $8.5 Pilling Resistance - Brush Pilling er ASTM D5 / yard Snap ing - Holding Strength of Prong Ring Attached Snap Fasteners ASTM D74 $.0 Snap ing - Resistance of Unsnapping of Snap Fasteners ASTM D4846 $.0 Stretch Properties of Textile Fabrics - CRE Method ASTM D664 yard $8.5 Stretch Properties of Knitted Fabrics Having Low Power - Elastic Recovery ASTM D594 Stretch Properties - Tension and Elongation of Elastic Fabrics ASTM D4964 Elastic Recovery At the Sock Cuff "Stay Up" MSC method $.00 Break Strength & Elongation of Fabrics - Grab Accredited ISO/IEC 705 ASTM D504 yard Breaking Strength of Fabrics - Grab Method - Constant-Time-to-Break Principle CAN/CGSB-4. No. 9.-M90 yard Break Strength - Grab of Coated Fabrics ASTM D75 Sect -5; Proc A yard Break Strength & Elongation of Fabrics - Strip Method ASTM D505 yard Tearing Strength - Single Rip Method CAN/CGSB-4. No..-M90 yard Breaking Force & Elongation of Nonwoven Materials (Strip Method) WSP 0.4 009 yard Grab Breaking Load & Elongation of Geotextiles ASTM D46 yard Tear Strength of Fabrics - Tongue Tear (Single Rip) ASTM D6 yard Tearing Strength of Fabrics by Falling-Pendulum (Elmendorf-Type) ASTM D44 yard Tear Strength of Non-woven Fabrics - Tongue Tear (Single Rip) ASTM D575 yard Tearing Strength of Nonwoven Fabrics by the Tongue Tear (Single Rip) Procedure (CRE) WSP 00. 009 Tear Strength of Fabrics - Trapezoid Procedure Accredited ISO/IEC 705 ASTM D5587 yard yard Trapezoid Tear Strength of Geotextiles ASTM D45 yard Tear Strength of Non-Woven Fabrics-Trapezoid Procedure Accredited ISO/IEC 705 ASTM D57 Tear Strength of Nonwoven Fabrics by the Trapezoid Procedure WSP 00. 009 Failure in Sewn Seams in Woven Apparel Fabric - Seam Strength ASTM D 68 yard yard yard Seam Slippage - Woven Fabrics ASTM D44 yard Breaking Strength and Elongation of Textile Webbing, Tape and Braided Material ASTM D6775 yard Strength and Elongation, Breaking (Webbing, Tape, and Braided Items) Federal 9A method 408 yard Strength and Elongation Breaking of Cordage: Non-Spliced Specimen Method PIA- Method-606 yard Standard Method for Peel Strength of Hook and Loop Touch Fasteners ASTM D570 yard Flammability ing: Flammability of Wearing Apparel Accredited CPSIA / ISO/IEC 705 6 CFR 60/ASTM D0 Flammability Apparel Exemption - Fabric Weight Accredited CPSIA / ISO/IEC 705 6 CFR 60 (ASTM D776) Flammability Apparel Exemption - Fiber Content Accredited CPSIA / ISO/IEC 705 6 CFR 60 (AATCC 0 & 0A) garments/ yd / ' x ' / ' x ' $7.60 $4.0 Form ID: M:\Customer Templates\ Package Request Form-Rev 9 04-8-6 Page 4 of 7

Flame Resistance - 45 Angle - One Second Flame Impingement CAN/CGSM-4. No. 7.5-008 Flammability of Children's Sleepwear: Sizes 0-6X Accredited CPSIA / ISO/IEC 705 6 CFR 65 Flammability of Children's Sleepwear: Sizes 7-4 Accredited CPSIA / ISO/IEC 705 6 CFR 66 Vertical Flammability Federal 9A method 590 Vertical Flammability ASTM D64-07 (0) Vertical Flammability - Flame Impingement ASTM F58-00 (005) 0 garments/ yd 0 garments/ yd 0 garments/ yd 0 garments/ yd 0 garments/ yd 0 garments/ yd $7.60 NFPA 70 - Fire s for Flame Propagation of Textiles and Films NFPA 70 TM 0 garments/ yd California Technical Bulletin 7-0 Section -Cover Fabric s and Classification System for Cigarette Ignition Resistance of Components of Upholstered Furniture-Cover Fabric CA TB7-0 NFPA 60-0 / yard $80.00 / yard $80.00 UFAC -Fabric Classification UFAC / yard $80.00 Formaldehyde, Phenols, ph & Alkali ing: Formaldehyde Detection JIS L 04 Formaldehyde Detection (Spot Method) MSC-05 (Spot Method) Formaldehyde Detection - Jar Method AATCC -008 Formaldehyde - Part : Free and Hydrolyzed Formaldehyde (Water Extraction Method) - Textile ISO 484- Part Formaldehyde - Part : Released Formaldehyde (Vapour Absorption Method) - Textile ISO 484- Part ph Level AATCC 8 ph of aqueous extract BS EN ISO 07:006 Phenolic Yellowing (propensity to yellow) ISO 05-X8 $.0 $.0 $8.5 Phenol Levels (Plastics) MSC Phenol Level Method $8.5 Alkalinity AATCC 44 $8.5 Metal/Lead ing: Metal/Lead Screening using XRF Gun ASTM F85-0 Call for details $7.50 Moisture Management ing: Absorbency - to be performed after home laundering AATCC/ASTM TS-08 $4.50 Absorbency - to be performed after home laundering - Option A: Burette Stand Method AATCC 79: Option A $4.50 Absorbency - to be performed after home laundering - Option B: Medicine Dropper Method AATCC 79: Option B $4.50 Absorption of Nonwovens - Liquid wicking rate ISO 907-6 Section 6 $4.50 Drying Rate - to be performed after home laundering HTC Scale Method $6.60 Liquid Moisture Management Properties of Textile Fabrics - MMT Method AATCC-95 5 $40.00 Vertical Wicking-Option A Measure time at given distance; Circle to test: ORIGINAL STATE OR AFTER LAUNDERING (provide laundering instructions) Vertical Wicking-Option B Measure distance at given time Circle to test: ORIGINAL STATE OR AFTER LAUNDERING (provide laundering instructions) AATCC 97 AATCC 97 $6.60 $6.60 Vertical Wicking - Distance Over Time; to be performed after home laundering TPACC Method $6.60 Vertical Wicking - Time Over Distance; to be performed after home laundering AATCC/ASTM TS-07 $6.60 Physical ing: Float Loop Length and Pattern Yarn Strings in Socks Socks $.00 Appearance After Repeated Home Laundering - Color Change, Skew, Pill, Fuzz AATCC/ASTM TS-008 garments/ ½ yard $8.5 Air Permeability - US Standard (8 cm sample head; 5 Pa; cfm) ASTM D77 garments/ ½ yard $8.5 Air Permeability - British Standard (5 cm sample head, 98 Pa, cm /cm /s) BS 566 Air Permeability of Nonwoven Materials WSP 70. 008 Air Permeability - US Standard (0 cm sample head; 5 Pa; cfm) garments/ ½ yard ½ yard garments/ ½ yard $8.5 $8.5 $8.5 Care Instruction Confirmation ASTM D98 $80.0 Care Instruction Establish ASTM D98 7 Fabric Weight Accredited ISO/IEC 705 ASTM D776 Fabric Weight (Mass Per Unit Area) ISO 80:977 Method 5 garments/ ½ yard garments/ ½ yard $.0 $.0 Unit Mass of Fabrics CAN/CGSB-4. No. 5.-M90 garments/ ½ yard $.0 Fabric Weight (Mass Per Unit Area) (Nonwovens) WSP 0. 009 Fabric Mass - Coated Fabrics ASTM D75 Sect 0. garments/ ½ yard ½ yard $.0 $.0 Fabric Width ASTM D774 yards full width $.0 Form ID: M:\Customer Templates\ Package Request Form-Rev 9 04-8-6 Page 5 of 7

Determination of Width and Length of Textile Fabrics CAN/CGSB-4. No. 4.-008 Dimensional Change / Stability (Shrinkage) - Fabrics After Home Laundering AATCC 5 Dimensional Change / Stability (Shrinkage) - Garments After Home Laundering AATCC 50 Dimensional Change / Stability (Shrinkage) -Socks After Home Laundering by Stretch Method AATCC 5 / Stretch Method Dimensional Change / Stability (Shrinkage) - ISO Method ISO 5077:007 Dimensional Change / Stability (Shrinkage) - Canadian Method CAN/CGSB-4. No. 58-004 Dimensional Change / Stability (Shrinkage) - Fabrics After Actual Commercial Dry Cleaning () AATCC 5 & PERC dry cleaning Fit Properties of Socks - NAHM forms & Stretch information - Before & After Laundering HIFOMACO LCS 4800 Fit Properties of Sheers and Tights - THA Volumetric Forms Fit Properties of Sheers and Tights - Stretch Information Relaxed Layout of Socks/Hosiery HIFOMACO HT - 6L Soil Release - Oily AATCC 0 Additional Stains for Soil Release Evaluating Stain Removal Performance in Home Laundering - up to 6 Stains (excluding blood) Additional Stains for Soil Release ASTM D465 Smoothness Appearance of Fabrics After Repeated Home Laundering AATCC 4 Smoothness of Seams in Fabrics After Repeated Home Laundering - Single and Double Seam Snagging - ABC er AATCC 88B ASTM D99/D99M Repeated Home Laundering ($.70 per Laundering)-AATCC Powder Detergent w/o Brightener AATCC 50 Repeated Home Laundering ($.70 per Laundering)-AATCC Liquid Detergent w/o Brightener AATCC 50 Repeated Home Laundering ($.70 per Laundering)-Other: AATCC 50 Repeated Home Laundering at Temps above 0 f ($.00 per Laundering) AATCC 50 Repeated Hand Laundering ($.70 per Laundering)-AATCC Powder Detergent w/o Brightener AATCC/ASTM TS-006 Domestic Washing and Drying Procedures for Textile ing ISO 60:000 Fabric Hand AATCC EP5 Horizontal Pull Slipmeter - Slip Resistance Laminate Hardwood & Ceramic Tile ASTM F09-05 Water Repellency: Spray AATCC Water Resistance: Impact Penetration AATCC 4 Surface Water Absorption of Terry Fabrics (Water Flow) ASTM D477 Aqueous Liquid Repellency: Water/Alcohol Solution Resistance AATCC 9 Oil Repellency: Hydrocarbon Resistance AATCC 8 Visual Inspection and Defect Identification Skewness Change in Fabric and Garment Twist AATCC 79 Moisture Vapor Transmission - MVTR (Water Vapor Transmission) Moisture Vapor Transmission - MVTR (Water Vapor Transmission) Inverted Cup Method BW ASTM D990-/D540 ASTM E96 Procedure B ASTM E96 Procedure BW yds full width (min) yards full width Foam Density ASTM D574 A Volume more than 000mm Foam Indentation Force Deflection Specified Deflection (IFD) ASTM D574 B 80mm x 00mm Indention Residual Gauge Length Specified Force (IRGL) ASTM D574 B 80mm x 00mm Compression Force Deflection ASTM D574 C 80mm x 00mm Constant Deflection Compression Set ASTM D574 D 80mm x 00mm Static Force Loss at Constant Deflection ASTM D574 I 80mm x 00mm Dynamic Fatigue by Constant Force Pounding Procedure A (8,000 cycles) ASTM D574 I 80mm x 00mm Dynamic Fatigue by Constant Force Pounding Procedure B (80,000 cycles) ASTM D574 I 80mm x 00mm socks yards full width Socks Sheer/Tight Sheer/Tight Socks/Hosiery yard/ garment yards or MSC will provide fabric garment yard / yard yard yards/ garments $0.5 $0.5 $8.5 $0.5 $8.5 $0.5 $0.5 $8.5 $8.5 $8.5 $8.5 $.70 $.70 $.00 $.70 $.70 $6.00 $0.5 $.0 / yard $5.00 $0.5 $45.5 $.0 $45.65 $.70 $8.50 $.0 $.0 $.0 $0.5 $65.00 $65.00 $500.00 Form ID: M:\Customer Templates\ Package Request Form-Rev 9 04-8-6 Page 6 of 7

Dynamic Fatigue by Constant Force Pounding Procedure C (,000 cycles slower rate) ASTM D574 I Recovery Time Stiffness of Fabrics Fabric Thickness ing Lab Technician Hourly Rate $5/hr. Weather and Light Stability ASTM D574 M ASTM D88 MSC Method Operating Fluorescent Light Apparatus for UV Exposure of Nonmetallic Materials (UVA) ASTM G54-06 exposure hrs. Operating Xenon Arc Light Apparatus for Exposure of Non-Metallic Materials ASTM G55-05a exposure hrs. AATCC 69 exposure hrs. 4 yards or 0 Weather Resistance of Textiles: Xenon Lamp Exposure $.40 Option? garments Weather Resistance: UV Light and Moisture Exposure AATCC 86 exposure hrs. Option? Colorfastness to Light: Xenon-Arc - Option or E or 6. - $.40/hr. - AATCC 6. exposure hrs.. Colorfastness. to Light: Outdoor-Option 6. (Actual outdoor weathering utilizing a weathering station) AATCC 6. Xenon-Arc Exposure Plastics Outdoors Cycle - $.40/hr. exposure hrs. ASTM D565-99/08exposure hrs. Fill in 80mm x 00mm 80mm x 00mm ½ yard ¼ yard 4 yards or 0 garments > " x " sample $550.00 $45.00 $.00 $5.00 $.40 $.40 $.40 $.40 $.40 $.40 Geotextile Deterioration-Light, Moisture & Heat using Xenon Arc ASTM D455-07 exposure hrs. Weatherability of Automotive Parts JIS D 005 exposure hrs. Rubber Deterioration - Using Artificial Weathering Apparatus (Xenon-Arc) ASTM D750- exposure hrs. Rubber Deterioration - Using Artificial Weathering Apparatus (QUV-UVA) ASTM D750- exposure hrs. Rubber Deterioration - Discoloration from UV & heat Exposure of Light Colored Surfaces ASTM D48-07a exposure hrs. linear yards $.40 $.40 $.40 $.40 $.40 Accelerated Weathering Conditions and Procedures for Bituminous Materials - Cycle A ASTM D4798-04 exposure hrs. $.40 Paper ing (TAPPI): Tensile Properties of Paper and Paperboard Using CRE Apparatus ASTM D88-00 yard or 0 sheets $.00 Tensile Properties of Paper and Paperboard CRE TAPPI T 494 om-06 yard or 0 sheets $85.00 Tensile Breaking Strength of Water-Saturated Paper and Paperboard TAPPI T 456 om-0 yard or 0 sheets $.00 Tensile Properties of Towel and Tissue Products (using CRE machine) TAPPI T 576 pm-07 Full Roll $.00 Burst Strength - CRE Method ASTM D6797 5 $.0 Absorbency (vd Scale Method) vd Scale Method 0 sheets $.00 Water Absorbency of Bibulous Papers TAPPI T 4 cm-09 0 sheets $.00 Grammage of Paper and Paperboard (Weight Per Unit Area) TAPPI T 40 om-08 0 sheets $.0 Center-Pull Pull (vd Method) vd Towel Pull Method Full Roll $5/hr Folded Towel Pull (vd Method) vd Towel Pull Method Full Stacks $5/hr Liquid Moisture Management Properties - MMT Method AATCC-95 0 sheets Disintegration of Towel and Tissue Products MSC Method 0 sheets $.00 Roll Length MSC Method using ILE-AR-8 Full Roll $.0 Spec for Paper Towels for Industrial and Institutional Use ASTM D44-9 Other: call/email Shipping/Return Samples to Customer (If Applicable) - Tracking Number & Carrier $0.00 SUB-TOTAL 0 Results from testing may include confidential and proprietary information. I agree to keep this information confidential. I understand that results may be used for research purposes only. Lab Manager's Signature Date 0/4/4 PRICES SUBJECT TO CHANGE WITHOUT NOTICE EXPRESS TESTING We accept major credit cards. Call for details (88-7-7000 x465) 0 Cost Form ID: M:\Customer Templates\ Package Request Form-Rev 9 04-8-6 Page 7 of 7