Mechanical Digital DX Locks

ASSA ABLOY, the global leader in door opening solutions

Contents Mechanical Digital DX Locks Overview 1 002 Digital DX Deadlatch 2 530 Digital DX Entrance Set 3 3572 Digital DX Mortice Locksets 4 3582, 3592 Short Digital DX Locksets 5 3572 Key Override Digital DX Lockset 6 3572 Key Override & Code Lockout Digital DX Lockset 7 Digital Accessories 8 Ordering Procedures 9

Lockwood Catalogue The Lockwood Digital DX Locksets provide a mechanical method of keyless entry along with simple, cost-free changing of the digital code combination. For extra security when under forced attack, the inbuilt clutching mechanism allows the outside knob to rotate without operating or damaging the lock. The factory set 5 digit code is easily changed to any 4, 5 or 6 digit code using the code changing kit provided with each lock. Lockwood Digital DX Locksets are designed to control access into commercial areas, especially when frequent combination changes are needed to maintain security. As the digital lockset is mechanical operation, electrical wiring is not required. Selected locksets combined with digital access pads provide keyless entry. Specification Service For all Architectural hardware specification assistance refer to your local Lockwood Sales Office. A fully comprehensive, obligation free, Architectural Door Hardware specification can be prepared by Lockwood Architectural Hardware Consultants. FIRE RATED Lockwood Mechanical and 3572 Series Locks (excluding rubber gasket) have been successfully tested to 4 hours on fire door assemblies in accordance with Australian Standard AS 1905.1: 1997, Fire Resistant Doorsets. Lockwood Mechanical Digital DX530 Series locks (excluding rubber gasket) have been successfully tested to 2 hours on fire door assemblies in accordance with Australian Standard AS1905.1: 1997, Fire Resistant Doors 1

002 Digital DX Deadlatch Suits right or left hand doors opening in. For outward opening doors or doors with metal frames, special 002 Digital DX locks are available on application. Outside Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turnknob the code is automatically cancelled. Inside Opened by knob/lever at all times. Door Thickness to 45mm. Internal Case Assembly High purity zinc alloy, 92mm wide, 72mm high, 54mm projection. Bolt 18mm projection, stainless steel. 60mm. Hold-back Function Bolt hold-back function activated by Hold-back Function Standard Finishes Gold GLD Ordering Refer to back of catalogue for Ordering Procedure. Page 9. 45 29 27 33 54 92 166 160 42.5 40 20 72 60 18 2 1300 LOCK UP (1300 562 587) lockweb.com.au

Lockwood Catalogue 530 Digital DX Entrance Set Suits right or left hand doors opening in or out. Outside Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turnknob the code is automatically cancelled. Inside Opened by knob at all times. Deadlatch Bolt Brass13mm projection. Door Thickness 35 to 45mm. 60mm. 70 and 127mm latches available separately on application. Options: Also available in double keypad version, which provides a keypad on each side of the door. Standard Finishes Plate FIRE RATED Lockwood 530 Digital DX Entrance Set (excluding rubber gasket) has been successfully tested to 2 hours on fire door assemblies in accordance with Australian Standard AS 1905.1: 1997, Fire Resistant Doorsets. 41 22 22 24 13 Ordering Refer to back of catalogue for Ordering Procedure. Page 9. 169 159 36 57 36 60 25 13 3

Mortice Digital DX Lockset Standard and narrow stile mortice locksets combined with digital access keypads to provide keyless entry. Outside Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turnknob the code is automatically cancelled. Inside By lever handle or knob at all times. Bolt Hold-back A key operated hold-back function is available upon request. This is achieved by a pin tumbler cylinder on the inside allowing the bolt to be held back. Standard Finishes 3572 Digital DX Lockset Combination of 3572 Series Cylinder Mortice Lock, Lockwood 1800 or 2800 Series and Digital Access Pad to provide keyless entry. 60mm Standard. Extended s 89mm and 127mm on application. 22 Door Thickness to 50mm. 41 24 59 48 Options: Also available in double keypad version, which provides a keypad on each side of the door. Door Furniture 169 36 175 166 Lockwood 1800 and 2800 Series (ordered separately). 20 FIRE RATED Lockwood 3572 Mortice Digital DX Locksets (excluding rubber gasket) have been successfully tested to 4 hours on fire door assemblies in accordance with Australian Standard AS 1905.1: 1997, Fire Resistant Doorsets. 60 25 15 1 1300 LOCK UP (1300 562 587) lockweb.com.au 4

Lockwood Catalogue 3582, 3592 Short Digital DX Locksets Combination of 3582 Series Short Cylinder Mortice Lock, Lockwood 4800 and 5800 Series Furniture and Digital Access Pad to provide keyless entry. Open-out door: 23, 25.4, 30 and 38mm. Open-in door: 38mm recommended. Installation of 23, 25.4 or 30mm on openin doors would require the door stop to be machined to clear the digital pad. Note: influences lever handle compatibility (refer to Brass Door Furniture catalogue). Door thickness to 50mm for timber doors. 35 to 50mm for metal doors. Options: Also available in double keypad version, which provides a keypad on each side of the door. Door Furniture Lockwood 4800 and 5800 Series (ordered separately). As suitability of lever will be influenced by the lock backset, refer to chart for Lever/ compatibility, in Brass Door Furniture catalogue. Ordering Refer to back of catalogue for Ordering Procedure. Page 9. 41 22 24 52 26 169 36 159 185 20 23 25 15 124 5

3572 Key Override Digital DX Lockset Outside: Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turnknob the code is automatically cancelled. The key override pin tumbler cylinder enables quick access by key for authorities such as the Fire Brigade or those who need to carry a master key to access all rooms of a building. Inside: By lever handle or knob at all times. Door Thickness 35 to 50mm. Lock Assembly Lock assembly 3572 Series Cylinder Mortice Deadlatch. 60mm standard. Extended backsets 89 and 127mm on application. Cylinder Pin tumbler mechanism with round brass cylinder. Keying Standard Keying Supplied individually keyed, with two keys per lock. 78,000 key combinations. Key blank KB2015P. 22 Special Keying Can be keyed alike, master keyed, grand master keyed, maison keyed or construction keyed in Lockwood security keying systems. Bolt Hold-back Function A key operated hold-back function is available. This is achieved by a pin tumbler cylinder on the inside allowing the bolt to be held back. Will also require change to internal furniture plate. 169 36 41 60 27 44 25 59 20 175 48 15 1 166 6 Door Furniture Order furniture separately. For furniture to suit 3572 Series Locksets select from Lockwood 1800 and 2800 Series. Standard Finishes 1300 LOCK UP (1300 562 587) lockweb.com.au FIRE RATED Lockwood 3572 Key Override Digital DX Locksets (excluding rubber gasket) has been successfully tested to 4 hours on fire door assemblies in accordance with Australian Standard AS 1905.1: 1997, Fire Resistant Doorsets. Ordering Refer to back of catalogue for Ordering Procedure. Page 9.

Lockwood Catalogue 3572 Key Override & Code Lockout Digital DX Lockset Outside: Press the C button, enter the correct code, then turn the knob to unlock the door. Upon releasing the turnknob the code is automatically cancelled. The key override pin tumbler cylinder enables quick access by key for authorities such as the Fire Brigade or those who need to carry a master key to access all rooms of a building. In addition, an interior pin tumbler lockout cylinder is fitted. Inside: By lever handle or knob at all times. The lockout cylinder enables the digital function to be made inoperative, allowing for key entry only during certain times of the day or after hours. Door Thickness 35 to 50mm. Lock assembly 3572 Series Cylinder Mortice Lockset. 60mm standard. Extended backsets 89 and 127mm on application. Keying Standard Keying Supplied individually keyed, with two keys per lock. 78,000 key combinations. Key blank KB2015P. 41 22 27 59 48 Special Keying Can be keyed alike, master keyed, grand master keyed, maison keyed or construction keyed in Lockwood security keying systems. Cylinder Pin tumbler mechanism with round brass cylinder outside, oval cylinder inside. 169 36 60 44 25 20 175 15 1 166 Door Furniture Order furniture separately. For furniture to suit 3572 Series Locksets select from Lockwood 1800 and 2800 Series. Standard Finishes FIRE RATED Lockwood 3572 Key Override & Code Lockout Digital DX Locksets (excluding rubber gasket) has been successfully tested to 4 hours on fire door assemblies in accordance with Australian Standard AS 1905.1: 1997, Fire Resistant Doorsets. Ordering Refer to back of catalogue for Ordering Procedure. Page 9. 7

Bolt Hold-back Function Digital Accessories Hold-back Cylinder Special cylinders with levers that enable the latchbolt to be held in the retracted position. This cylinder type hold-back can only be applied or released by the key. These special cylinders are available on application and are supplied ex-factory handed to suit lock function. Can only be installed to internal side of digital locks. Rebate Kits Rebate kits suit standard 13mm rebate. Standard finishes Bright Chrome CP 12.7 14.3 4 14.3 1.6 29 Standard finishes Bright Chrome CP 12.7 4 1.6 29 263 101.6 269.5 177.5 75 184 26.5 13.5 26.5 31.8 LOCK SPACER STRIKE 3570 Series 3580 Series 3580-2902 SERIES RABATE KIT Right hand Left hand 3570 Series Locks 3570-2402 3570-2452 3580 Series Locks 3580-2402 3580-2452 To order, add finish to part number eg. 3570-2402CP. Short/Extended Lipped Strikes Standard finishes Bright Chrome CP Satin Stainless Steel SSS Lip Length 3571-2902 3571/3573 RABATE KIT Rebate kit part No. 3570 Series 3570-2902 3580 Series 3580-2902 CW/ACW To order, add finish to part number eg. 3570-2902CP. Handing DOOR OPENING IN 70 54 1.6 ACW INSIDE OUTSIDE CW 46.1 A 28.5 DOOR OPENING OUT 38 Finish (A) Part No. 3570 & 3580 Series Locks SSS 25.4mm SP3570-4053 CP, 25.4mm SP3570-4153 SSS mm SP3570-5053 CP, mm SP3570-53 SSS 43.5mm SP3570-5253 CP, 43.5mm SP3570-5353 SSS 43.5mm SP3570-5453 CP, 43.5mm SP3570-5653 530 Series CP,, 40mm 530-153 CW INSIDE OUTSIDE ACW CW (Clockwise) Left Hand open in and Right Hand open out. ACW (Anti-Clockwise) Left Hand open out and Right Hand open in. 8 To order, add finish to part number eg. SP3570-4153CP.

Lockwood Catalogue Ordering Procedure Sample Part Number 3572DXKOR is made up of several sections. Choose your product by selecting an option from each section. Specification Service For all Architectural hardware specification assistance refer to your local ASSA ABLOY Sales Office. For example: Mortice Digital DX Locks Ordering Procedures Bakset 3 Product Function 572DX 60mm 3 89mm 4 127mm 5 Short 23mm 3 25.4mm 4 Special Spec. KO Function Hand R Mortice Lock 572DX Short backset mortice Lock (metal door) 582DX Short backset mortice Lock (timber door) 592DX Special Specification Finish Hand Right Left Finish R L A fully comprehensive, obligation free, Architectural Door Hardware specification can be prepared by Architectural Hardware Representatives. Quality Endorsed Company SAI Global operates a program which assesses the quality procedures and capabilities of an organisation in termsof the requirements of specific Australian and International Standards for Quality Systems. Following assessment by SAI Global, ASSA ABLOY Australia Pty Limited, Quality Environment 235 Huntingdale Rd, Oakleigh VIC ISO 9001 ISO 14001 3166 have been granted a certificate of registration as a quality endorsed company complying with the requirements of AS 3902/ISO 9001 Quality Systems for Production and Installation. 30mm 5 38mm 6 Hardware Code 530 Hardware Code Keypad Code DX 530 Latch and Plate 530 002 Deadlatch (knob) 002-1K 002 Deadlatch (lever) 002-1L Keypad Code Digital DX DX None Key Over-ride Code Lockout 002/530 Digital DX Ordering Procedure Finish Finish Gold or Packaging Packaging DP KO CLO GLD Display Pack DP Trade Pack Disclaimer Whilst every effort has been made to ensure that the information contained in this catalogue is accurate at the time of publication, ASSA ABLOY recommends that you consult ASSA ABLOY or its agents prior to placing an order to ascertain current information on specific products, as ASSA ABLOY reserves the right to make changes without notice. ASSA ABLOY will not be liable for any injury, loss or damage whatsoever, arising from any errors or omissions in the information contained in the catalogue or arising from the use or application of the information contained herein. This catalogue does not constitute an offer for the sale of any particular product. Lockwood Guarantee and Care & Maintenance Please go to lockweb.com.au for details on Lockwood Guarantee and product care & maintenance. 9

ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience Lockwood is the leading brand in the Australian locking industry. With an established reputation for high quality products, this iconic brand provides a wide range of locking solutions to residential housing, commercial building and industrial application markets. Lockwood is supported by an extensive distribution and after-sales support network. Our customers include retailers, architects, trade and industrial personnel, locksmiths and security dealers. ASSA ABLOY is the global leader in door opening solutions, dedicated to satisfying end-user needs for security, safety and convenience. ASSA ABLOY is represented in all major regions, in both mature and emerging markets, with leading positions in Australia, Europe and North America. As the world s leading lock group, ASSA ABLOY offers a more complete product range of door opening solutions than any other company in the market. Australia 1300 LOCK UP (1300 562 587) lockweb.com.au New Zealand Telephone +64 9415 7888 assaabloy.co.nz ASSA ABLOY Australia Pty Limited 235 Huntingdale Road, Oakleigh Victoria, 3166 Australia info.au@assaabloy.com assaabloy.com.au ASSA ABLOY New Zealand Ltd. 6 Armstrong Road Albany, North Shore City, 06 New Zealand info.nz@assaabloy.com assaabloy.co.nz AAA-CAT-018 MS0331 ASSA ABLOY Australia Pty Limited ABN 90 086 4 907 2009