Lichtschranken W 8- Photoelectric Baureihe switches WL - Photoelectric proximity switches, BGS Photoelectric reflex switches Through-beam photoelectric switches W 8-: Integrated stateof-the-art technology for intelligent solutions Furthermore, the devices also incorporate a large number of features that are usually only found in special versions, e.g. the test input of the WS/WE 8- and WL 8-, the adjustable scanning distance with background suppression of the WTV 8-, individual plugs, or status LEDs as signal strength indicators, alignment aids, or prefailure signalling output. 0 SENSICK CATALOGUE TThe W 8- series of photoelectric switches is ideal for handling systems as well as for packaging machines and other complex tasks. WT 8- photoelectric proximity switches, WL 8- photoelectric reflex switches, or WS/WE 8- through-beam photoelectric switches thanks to their glass-fibre-reinforced and fully welded plastic housing, all of these sensors have the robustness required for industrial applications. Extremely large scanning ranges are an additional feature: up to 0 metres for the throughbeam photoelectric switch, up to metres for the photoelectric reflex switch and 00 mm or 00 mm for the photoelectric proximity switch (depending on whether a red light or infrared light source is used). The WTV 8- photoelectric proximity switch has been specially developed for and with the packaging industry. Its features include: its broad optical basis, internally adjustable optics, stateof-the-art electronics, powerful background suppression and optimised light spot geometry which together provide a previously unattainable level of immunity against ambient reflections. The detection of plastic bags on a conveyor belt, glossy and differently sized coffee packets or drinks cartons before being packed, cakes packed in plastic film on a stainless steel chain conveyor, or drinking straws attached to drinks containers all of these tasks can be mastered without any problem with the WTV 8-.
WL - W 8- m WTV 8- sensors used to check the presence of objects along the individual lanes of a packaging line for packs of coffee. b Transparency poses no problems: the WL 8- photoelectric reflex switch monitors the edges of packaging film. v Is the packaging unit complete? WT 8- photoelectric proximity switches provide us the answer. n Leak test for plastic bottles: WT 8- sensors used to check the presence of test objects in the automatic machine. SENSICK CATALOGUE
WT 8- Photoelectric proximity switches, background suppression, infrared light -- DC 0...00 mm Photoelectric proximity switches Adjustable background suppression Insensitive to ambient light sources (HF lamps, flashing alarm lamps) No mutual interference if devices are installed opposite each other Operating temperature -- 0 C...+0 C Fast response time Dimensional drawing 0. max... 0 0.. Adjustments possible WT 8-P WT 8-N WT 8-P WT 8-N WT 8-P 0 WT 8-N 0 WT 8-P 0 WT 8-N 0 Standard direction of the material being scanned LED signal strength indicator Optical axis, sender Optical axis, receiver Mounting hole l. mm adjustment Alignment sight C V WT 8-P WT 8-P WT 8-N WT 8-N WT 8-P 0 WT 8-P 0 WT 8-N 0 WT 8-N 0 Accessories page Cable receptacles 9 Mounting brackets 0 x. mm -pin, M -pin red brn gra blk ora wht SENSICK CATALOGUE
WT 8- Technical data WT 8- P P P 0 P 0 N N N 0 N 0, max. typical 0...00 mm, adjustable Light source ), light type Light spot diameter LED, infrared light 0 mm at 00 mm Supply voltage V S Ripple ) Current consumption ) 0...0 VDC V SS < ma < ma Switching outputs PNP, Q and Q NPN, Q and Q Output current I A max. 00 ma PNP; signal voltage HIGH V S (<.9 V) PNP; signal voltage LOW Approx. 0 V NPN; signal voltage HIGH Approx. V S NPN; signal voltage LOW <. V Response time ) < 00 µs Max. switching frequency ) 00/s Cable ), m Cable ), m VDE protection class 8) Circuit protection 9) Plug V A, B, C Enclosure rating IP IP Ambient temperature T A Operation 0 C...+0 C Storage 0 C...+ C Weight Approx. 00 g Housing material ABS, acrylonitrile butadiene styrene ) Average service life 00,000 h at T A = + C ) Limit values ) May not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output Q and Q short-circuit C = Interference pulse suppression 0 00 0 00 0 00 0 (mm)00 00 00 00 00 00 00 on black, % remission on grey, 8 % remission on white, 90 % remission % of scanning distance 0 0 0 Order information Type WT 8-P WT 8-P WT 8-P 0 %/90% WT 8-P 0 WT 8-N WT 8-N WT 8-N 0 WT 8-N 0 8%/90% 90%/90% 0 (mm) 00 00 00 00 00 00 00 Part no. 0 88 0 890 0 89 0 900 0 89 0 88 0 88 0 9 SENSICK CATALOGUE
WT 8- Photoelectric proximity switches, background suppression, red light -- DC 0...00 mm Photoelectric proximity switches Adjustable background suppression Insensitive to ambient light sources (HF lamps, flashing alarm lamps) No mutual interference if devices are installed opposite each other Operating temperature -- 0 C...+0 C Fast response time Dimensional drawing 0. max... 0. 0. Adjustments possible WT 8-P WT 8-P 0 WT 8-N WT 8-N 0 Standard direction of the material being scanned LED signal strength indicator Optical axis, sender Optical axis, receiver Mounting hole l. mm adjustment Alignment sight C V WT 8-P WT 8-N WT 8-P 0 WT 8-N 0 Accessories page Cable receptacles 9 Mounting brackets 0 x 0. mm -pin, M red brn gra blk ora wht SENSICK CATALOGUE
WL - WT 8- Technical data WT 8- P P0 N N0, max. typical 0...00 mm, adjustable Light source ), light type Light spot diameter LED, red light mm at 00 mm Supply voltage V S Ripple ) Current consumption ) 0...0 VDC V SS < ma < ma Switching outputs PNP, Q and Q NPN, Q and Q Output current I A max. 00 ma PNP; signal voltage HIGH V S (<.9 V) PNP; signal voltage LOW Approx. 0 V NPN; signal voltage HIGH Approx. V S NPN; signal voltage LOW <. V Response time ) < 00 µs Max. switching frequency ) 00/s Cable ), m Plug VDE protection class 8) Circuit protection 9) V A, B, C Enclosure rating IP Ambient temperature T A Operation 0 C...+0 C Storage 0 C...+ C Weight Approx. 00 g Housing material ABS, acrylonitrile butadiene styrene ) Average service life 00,000 h at T A = + C ) Limit values ) May not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output Q and Q short-circuit C = Interference pulse suppression 0 00 0 00 0 00 0 Order information Type WT 8-P WT 8-P 0 WT 8-N WT 8-N 0 Part no. 0 89 0 89 0 88 0 88 0 (mm)00 00 00 00 00 00 00 0 %/90% on black, % remission on grey, 8 % remission on white, 90 % remission % of scanning disatnce 8%/90% 0 90%/90% 0 (mm) 00 00 00 00 00 00 00 SENSICK CATALOGUE
WT 8- Photoelectric proximity switches, short range, background suppression, red or infrared light -- DC 0...0 mm Photoelectric proximity switches Adjustable background suppression Insensitive to ambient light sources (HF lamps, flashing alarm lamps) No mutual interference if devices are installed opposite each other Operating temperature -- 0 C...+0 C Fast response time Dimensional drawing 0. max... 0. 0. Adjustments possible WT 8-P WT 8-P 0 WT 8-P 8 WT 8-P 80 Standard direction of the material being scanned LED signal strength indicator Optical axis, sender Optical axis, receiver Mounting hole l. mm adjustment Alignment sight C V WT 8-P WT 8-P 8 WT 8-P 0 WT 8-P 80 Accessories page Cable receptacles 9 Mounting brackets 0 x 0. mm -pin, M red brn gra blk ora wht SENSICK CATALOGUE
WL - WT 8- Technical data WT 8- P P 0 P 8 P 80 0... 0 mm, adjustable Light source ), light type Light spot diameter LED, red light LED, infrared light 0 mm at 00 mm Supply voltage V S 0...0 VDC ) Ripple ) V SS Current consumption ) < ma Switching outputs PNP, Q and Q Output current I A max. 00 ma PNP; signal voltage HIGH V S (<.9 V) PNP; signal voltage LOW Approx. 0 V Response time ) < 00 µs Max. switching frequency ) 00/s Cable ), m Plug VDE protection class 8) Circuit protection 9) V A, B, C Enclosure rating IP Ambient temperature T A Operation 0 C...+0 C Storage 0 C...+ C Weight Approx. 00 g Housing material ABS, acrylonitrile butadiene styrene ) Average service life 00,000 h at T A = + C ) Limit values ) May not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output Q and Q short-circuit C = Interference pulse suppression 0 00 0 0 0 0 0 (mm) 00 00 00 0 %/90% Order information Type WT 8-P WT 8-P 0 WT 8-P 8 WT 8-P 80 Part no. 0 09 0 0 0 0 on black, % remission on grey, 8 % remission on white, 90 % remission % of scanning distance 8%/90% 90%/90% 0 (mm) 00 00 00 SENSICK CATALOGUE
WT 8- Photoelectric proximity switches, long range, background suppression, infrared light -- DC 0...000 mm Photoelectric proximity switches Adjustable background suppression Insensitive to ambient light sources (HF lamps, flashing arlam lamps) No mutual interference if devices are installed opposite each other Operating temperature -- 0 C...+0 C Fast response time Dimensional drawing 0. max... 0 0.. Adjustments possible WT 8-P WT 8-P 0 Standard direction of the material being scanned LED signal strength indicator Optical axis, sender Optical axis, receiver Mounting hole l. mm adjustment Alignment sight C V WT 8-P WT 8-P 0 Accessories page Cable receptacles 9 Mounting brackets 0 x 0. mm -pin, M red brn gra blk ora wht 8 SENSICK CATALOGUE
WL - WT 8- Technical data WT 8- P P0 0...000 mm, adjustable Light source ), light type Light spot diameter LED, infrared light 0 mm at a distance of 00 mm Supply voltage V S 0...0 VDC ) Ripple ) V SS Current consumption ) < ma Switching outputs PNP, Q and Q Output current I A max. 00 ma PNP; signal voltage HIGH V S (<.9 V) PNP; signal voltage LOW Approx. 0 V Response time ) < 00 µs Max. switching frequency ) 00/s Cable ), m Plug VDE protection class 8) Circuit protection 9) V A, B, C Enclosure rating IP Ambient temperature T A Operation 0 C...+0 C Storage 0 C...+ C Weight Approx. 00 g Housing material ABS, acrylonitrile butadiene styrene ) Average service life 00,000 h at T A = + C ) Limit values ) May not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output Q and Q short-circuit C = Interference pulse suppression 0 00 0 00 0 000 0 %/90% Order information Type WT 8-P WT 8-P 0 Part no. 0 9 0 99 0 (mm) 00 00 00 800 000 0 on black, % remission on grey, 8 % remission on white, 90 % remission % of scanning distance 0 0 8%/90% 90%/90% (mm) 00 00 00 800 000 SENSICK CATALOGUE 9
WTV 8- Photoelectric proximity switches, background suppression, infrared light -- DC 0...0 mm 00...00 mm Photoelectric proximity switches Dimensional drawing Adjustable background suppression Detection of objects with shiny surfaces Insensitive to ambient light sources (HF lamps, flashing alarm lamps) No mutual interference if devices are installed opposite each other Operating temperature -- 0 C...+0 C.8. 8 max..... 0 8 Adjustments possible WTV 8-P 0 WTV 8-P 0 8 Centre of optical axis, sender, WTV 8-P 0 Centre of optical axis, sender, WTV 8-P 0 Standard direction of the material being scanned Receiving range Mounting hole l. mm adjustment Alignment sight Status indicator C V Connection type WTV 8-P 0 WTV 8-P 0 Accessories page Cable receptacles 9 Mounting brackets 0 -pin, M brn blk wht 80 SENSICK CATALOGUE
WL - WTV 8- Technical data WTV 8- P0 P0 0...0 mm, adjustable 00...00 mm, adjustable Light source ), light type Light spot diameter LED, infrared light 8 mm at 0 mm 8 mm at 00 mm Supply voltage V S 0...0 VDC ) Ripple ) V SS Current consumption ) < 0 ma Switching outputs PNP, Q and Q Output current I A max. 00 ma PNP; signal voltage HIGH V S (<. V) NP; signal voltage LOW Approx. 0 V Response time ) ms Max. switching frequency ) 0/s Connection type Plug VDE protection class ) Circuit protection 8) V A, B, C Enclosure rating IP Ambient temperature T A Operation C...+0 C Storage C...+ C Weight Approx. 00 g Housing material ABS, acrylonitrile butadiene styrene ) Average service life 00,000 h at T A = + C ) Limit values ) May not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Reference voltage 0 V DC 8) A = V S connections reverse-polarity B = Output Q and Q short-circuit C = Interference pulse suppression 0 0 0 00.. %/90% Order information Type WTV 8-P 0 WTV 8-P 0 Part no. 0 98 0 0 (mm) 0 0 0 80 00 0 0 0 80 00 on black, % remission with P 0 on black, % remission with P 0 % of scanning distance. %/90%.0 0.8 0. 0. 0. 0 (mm) 80 00 0 0 0 80 00 SENSICK CATALOGUE 8
WL 8- Photoelectric reflex switches, red light -- DC Scanning range m Photoelectric reflex switches Dimensional drawing. Insensitive to ambient light sources (HF lamps, flashing alarm lamps) No mutual interference if devices are installed opposite each other Operating temperature -- 0 C...+0 C Fast response time Test input for system diagnosis, optional Autocollimation system max. 0.. 0.. Adjustments possible WL 8-P WL 8-N WL 8-P WL 8-N WL 8-P 0 WL 8-N 0 WL 8-N 0 Centre of optical axis LED signal strength indicator Mounting hole l. mm Sensitivity adjustment Alignment sight C V WL 8-P WL 8-P WL 8-N WL 8-N WL 8-P 0 WL 8-N 0 WL 8-P 0 WL 8-N 0 Accessories page Cable receptacles 9 Mounting brackets 0 Reflectors 0 x 0. mm -pin, M -pin red brn gra blk ora wht trq 8 SENSICK CATALOGUE
WL - WL 8- Technical data WL 8- P P P0 P0 N N N0 N0 Scanning range, max. typ./on reflector m/pl 80 A Sensitivity adjustable Light source ), light type LED, red light Light spot diameter 0 mm at m Supply voltage V S 0...0 VDC ) Ripple ) V SS Current consumption ) < ma Switching outputs PNP, Q and Q NPN, Q and Q Output current I A max. 00 ma PNP; signal voltage HIGH V S (<.9 V) PNP; signal voltage LOW Approx. 0 V NPN; signal voltage HIGH Approx. V S NPN; signal voltage LOW <. V Response time ) /Max. switching freq. ) < 00 µs; 000/s Test input TE PNP, sender OFF Test input to 0 NPN, sender OFF Test input to V+ Cable ), m Cable ), m VDE protection class 8) Circuit protection 9) Plug V A, B, C Enclosure rating IP IP Ambient temperature T A Operation 0 C...+0 C Storage 0 C...+ C Weight Approx. 00 g Polarising filter Housing material ABS, acrylonitrile butadiene styrene ) Average service life 00,000 h at T A = + C ) Limit values ) May not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output Q and Q short-circuit C = Interference pulse suppression Scanning range and operating reserve 0 0 0 0 0. 0 0..8... 00 0 Operating distance Order information Type WL 8-P WL 8-P WL 8-P 0 WL 8-P 0 WL 8-N WL 8-N WL 8-N 0 WL 8-N 0 Part no. 0 90 0 90 0 908 0 9 0 90 0 9 0 90 0 0 0(m) Operating range Reflector type PL 80 A C 0 PL 0 PL 0 A PL 0 A PL 0 A Reflective tape Diamond Grade Scanning range, max. typical Operating range 0...0 m 0...0 m 0...0 m 0...0 m 0... m 0...0 m 0...0 m Operating reserve (m) Scanning distance, max. typical SENSICK CATALOGUE 8
WS/WE 8- Through-beam photoelectric switches, red light -- DC Scanning range 0 m Through-beam photoelectric switches Dimensional drawing. Insensitive to ambient light sources (HF lamps, flashing alarm lamps) Operating temperature -- 0 C...+0 C Fast response time Test input for system diagnosis max.. 0... 0 Adjustments possible WS/WE 8-P WS/WE 8-N WS/WE 8-P 0 WS/WE 8-N0 WS/WE 8-P 0 Centre of optical axis Operating voltage indicator, green (WS) LED signal strength indicator, yellow (WE) Mounting hole l. mm Sensitivity adjustment Alignment sight WS/WE 8-P WS/WE 8-P 0 WS/WE 8-P 0 WS/WE 8-N WS/WE 8-N0 C V x 0. mm -pin, M -pin Accessories page Cable receptacles 9 Mounting brackets 0 Sender red brn wht trq blk Receiver red gra ora brn blk wht L+ Q Q M NC NC 8 SENSICK CATALOGUE
WL - WS/WE 8- Technical data WS/WE 8- P P 0 P 0 N N0 Scanning range, max. typical Sensitivity 0...0 m adjustable Light source ), light type LED, red light Light spot diameter Approx. 0 mm at m Angle of dispersion Approx.. Supply voltage V S 0...0 VDC ) Ripple ) V SS Current consumption ) < 0 ma sender without heating < ma receiver without heating < ma Switching outputs PNP, Q and Q NPN, Q and Q Output current I A max. 00 ma PNP; signal voltage HIGH V S (<.9 V) PNP; signal voltage LOW Approx. 0 V NPN; signal voltage HIGH Approx. V S NPN; signal voltage LOW <. V Response time ) 00 µs Max. switching frequency ) 000/s Test input TE sender OFF Test input to 0 V Connection type Cable ), m VDE protection class 8) Circuit protection 9) Plug V A, B, C Enclosure rating IP IP Ambient temperature T A Operation 0 C...+0 C Storage 0 C...+ C Weight Approx. 00 g Housing material ABS, acrylonitrile butadiene styrene ) Average service life 00,000 h at T A = + C ) Limit values ) May not exceed or fall short of V S tolerances ) Without load ) Signal transit time with resistive load ) With light/dark ratio : ) Do not bend below 0 C 8) Reference voltage 0 V DC 9) A = V S connections reverse-polarity B = Output Q and Q short-circuit C = Interference pulse suppression Scanning range and operating reserve 0 0 0(m) 8 0 Operating range Scanning range, max. typical 000 00 Order information Type WS/WE 8-P WS/WE 8-P 0 WS/WE 8-P 0 WS/WE 8-N WS/WE 8-N0 Part no. 0 9 0 9 0 98 0 9 0 9 0 Operating reserve 0 (m) 8 0 SENSICK CATALOGUE 8