S TA I N L E S S S T E E L M O U N T I N G S 9 Flamco Stainless steel mountings BRS-A BSF - SS RAIL R - SS GP - SS Edition 2007 / UK
Stainless steel mountings Flamco offers the best attachment options in The extensive range of Flamco mounting material consists of Sendzimir or electrolytically galvanized steel, perfectly suitable for most mechanical applications, such as central heating and cooling installations. In industrial installations and in the food processing industry, however, stainless steel quality mounting material is often required. For these types of installations Flamco offers stainless steel mounting material made of stainless steel 304 or stainless steel 316 quality. Application of Flamco SS mounting material in: Laboratories. Chemical industry. Corrosive environments. Medical installations. Abattoirs. Food processing industry. Sewage treatment plants. Dairy plants. Rail R - SS. Nut M - SS. rod D - SS. BRS-A bracket. The risk of corrosion does not allow stainless steel to come into direct contact with other ferrous metals. Flamco products that have not been included in this brochure may also be available in stainless steel quality upon request. (SLIDING) NUTS M..S WASHERS S - BOTH SS Sliding nuts M..s and washers S - both SS For easy assembly of a suspension in Flamco rail. Sliding nuts and washers can be tilted inside the Flamco rail at the point of suspension. Tables with types and technical specifications: page 9.4 9.7. 9.2
SS mounting material Stainless steel mountings BSA - SS BRS - SS BRS-A - SS BSF - SS RAIL R - SS RAIL CONSOLES R.X... - SS BSA SS The advantages of the BSA brackets (see brochure 1, page 1.2 and 1.3), but made from 316 stainless steel. Sizes range from 14 16 mm to 159 162 mm. BRS - SS Sizes range from 3 /8 to 3 /8. All types fitted with M 8 / M 10 combinut. Small overall s optional. Stainless steel 316. BRS-A - SS Same size range as with the BRS brackets, but with sound-insulating rubber insert. Fitted with M 8 / M 10 combinut. Ideal for installations in confined locations. Stainless steel 316. BSF - SS The advantages of the Flamco BSF brackets (see brochure 1, page 1.4), but made of 316 stainless steel. Sizes range from 3 /8 to 8. All types fitted with 1 2 / M 10 combinut. Rail R - SS Information about Flamco rail in brochure 6, pages 6.2 and 6.3. s R 1 and R 4 are standard available in stainless steel. Easy and quick assembly with adjustment facility. Rail consoles R.x... - SS For horizontal or vertical attachment for support or suspension. Secure mounting. THREADED RODS D - SS SCREW STUDS HO - SS BASE PLATES GP - SS CAPTIVE BOLT SETS HBS - SS ANCHOR BOLT - SS INNER HEXAGON SCREW - SS rods D - SS For all applications with threaded rods. Standard length of 1 metre. Stainless steel 304. Screw Studs HO - SS For attaching BRS, BSA-SS, BSF-SS or BRS-A brackets. With flats for wrench. Stainless steel 304. Base plates GP - SS For rigid attachment to wall or ceiling of bracket with threaded rod or threaded. Fitted with slotted holes for easy assembly. Stainless steel 304. Captive bolt sets HBS - SS A preassembled set consists of a captive bolt, nut and washer. Quick and easy assembly. Stainless steel 304. Anchor bolt - SS Hammer pin made from stainless steel 304. Inner hexagon screw - SS Screw made from stainless steel 304. 9.3
Stainless steel mountings BRS, BRS-A and BSH SS brackets BRS and BRS-A brackets sizes range from 3 /8 to 8. All types fitted with M 8 / M 10 combinut. Ideal for installation in confined spaces. BRS-A fitted with sound-insulating rubber insert. All BRS and BRS-A bracket types are fitted with stainless steel M 8 / 10 combinut. Versions and s BRS brackets Pipe inner diameter in Ø workload mm inch N mm Versions and s BRS-A brackets Pipe inner diameter in Ø Bolts BRS 8 / 10 x 3 /8 15-18 3 /8 M 8 / 10 1000 20 x 2.0 M 6 x 15 38477 BRS 8 / 10 x 1 /2 20-24 1 /2 M 8 / 10 1000 20 x 2.0 M 6 x 15 38478 BRS 8 / 10 x 1 /4 26-30 3 /4 M 8 / 10 1000 20 x 2.0 M 6 x 15 38479 BRS 8 / 10 x 1 1 /2 32-36 1 M 8 / 10 1000 20 x 2.0 M 6 x 15 38480 BRS 8 / 10 x 1 1 /4 38-42 1 1 /4 M 8 / 10 1000 20 x 2.0 M 6 x 15 38481 BRS 8 / 10 x 1 1 /2 47-50 1 1 /2 M 8 / 10 1000 20 x 2.0 M 6 x 15 38482 BRS 8 / 10 x 54 51-55 - M 8 / 10 1000 20 x 2.0 M 6 x 15 38483 BRS 8 / 10 x 2 1 /2 60-64 2 M 8 / 10 1000 20 x 2.0 M 6 x 15 38484 BRS 8 / 10 x 70 67-73 - M 8 / 10 1300 20 x 2.0 M 6 x 20 38486 BRS 8 / 10 x 2 1 /2 75-80 2 1 /2 M 8 / 10 1300 20 x 2.0 M 6 x 20 38487 BRS 8 / 10 x 3 1 /2 82-90 3 M 8 / 10 1300 20 x 2.0 M 6 x 20 38488 BRS 8 / 10 x 3 1 /2 100-103 3 1 /2 M 8 / 10 2000 20 x 2.0 M 6 x 20 38490 BRS 8 / 10 x 4 1 /2 114-119 4 M 8 / 10 2000 20 x 2.0 M 6 x 20 38491 BRS 8 / 10 x 125 124-131 - M 8 / 10 2000 20 x 2.0 M 6 x 20 38492 BRS 8 / 10 x 5 133-140 5 M 8 / 10 2000 20 x 2.0 M 6 x 20 38493 BRS 8 / 10 x 6 159-165 6 M 8 / 10 2000 20 x 2.0 M 6 x 20 38494 BRS 8 / 10 x 220 215-225 8 M 8 / 10 2000 20 x 2.0 M 6 x 20 38497 workload* at 19 db(a) mm inch N mm Bolts BRS-A 8 / 10 x 3 /8 15-18 3 /8 M 8 / 10 1000 20 x 2.0 M 6 x 15 38452 BRS-A 8 / 10 x 1 /2 20-24 1 /2 M 8 / 10 1000 20 x 2.0 M 6 x 15 38453 BRS-A 8 / 10 x 1 /4 26-30 3 /4 M 8 / 10 1000 20 x 2.0 M 6 x 15 38454 BRS-A 8 / 10 x 1 1 /2 32-36 1 M 8 / 10 1000 20 x 2.0 M 6 x 15 38455 BRS-A 8 / 10 x 1 1 /4 38-42 1 1 /4 M 8 / 10 1000 20 x 2.0 M 6 x 15 38456 BRS-A 8 / 10 x 1 1 /2 47-50 1 1 /2 M 8 / 10 1000 20 x 2.0 M 6 x 15 38457 BRS-A 8 / 10 x 54 51-55 - M 8 / 10 1000 20 x 2.0 M 6 x 15 38458 BRS-A 8 / 10 x 2 1 /2 60-64 2 M 8 / 10 1000 20 x 2.0 M 6 x 15 38459 BRS-A 8 / 10 x 70 67-73 - M 8 / 10 1300 20 x 2.0 M 6 x 20 38461 BRS-A 8 / 10 x 2 1 /2 75-80 2 1 /2 M 8 / 10 1300 20 x 2.0 M 6 x 20 38462 BRS-A 8 / 10 x 3 1 /2 82-90 3 M 8 / 10 1300 20 x 2.0 M 6 x 20 38464 BRS-A 8 / 10 x 3 1 /2 100-103 3 1 /2 M 8 / 10 2000 20 x 2.0 M 6 x 20 38465 BRS-A 8 / 10 x 4 1 /2 114-119 4 M 8 / 10 2000 20 x 2.0 M 6 x 20 38466 BRS-A 8 / 10 x 125 124-131 - M 8 / 10 2000 20 x 2.0 M 6 x 20 38467 BRS-A 8 / 10 x 5 133-140 5 M 8 / 10 2000 20 x 2.0 M 6 x 20 38468 BRS-A 8 / 10 x 6 159-165 6 M 8 / 10 2000 20 x 2.0 M 6 x 20 38469 BRS-A 8 / 10 x 220 215-225 8 M 8 / 10 2000 20 x 2.0 M 6 x 20 38473 BRS BRS-A * In order to guarantee efficient noise reduction we advise that the specified load of the bracket should not be exceeded! Versions and s BSH SS Pipe inner diameter in Ø mm inch mm BSH 11-15 SS 11-15 1 /4 M 8 / M 10 20 x 1.5 on request BSH 16-19 SS 16-19 3 /8 M 8 / M 10 20 x 1.5 on request BSH 21-23 SS 21-23 1 /2 M 8 / M 10 20 x 1.5 on request BSH 26-28 SS 26-28 3 /4 M 8 / M 10 20 x 1.5 on request BSH 32-35 SS 32-35 1 M 8 / M 10 20 x 1.5 on request BSH 40-43 SS 40-43 1 1 /4 M 8 / M 10 20 x 1.5 on request BSH 48-51 SS 48-51 1 1 /2 M 8 / M 10 20 x 1.5 on request BSH 52-56 SS 52-56 - M 8 / M 10 20 x 1.5 on request BSH 57-60 SS 57-60 2 M 8 / M 10 20 x 1.5 on request BSH - SS 9.4
BSA SS and BSF SS brackets The well-known Flamco BSA brackets, made from RVS 316 stainless steel. BSA SS sizes range from 14 16 mm to 159 162 mm. BSA-SS fitted with sound-insulating rubber insert. The well-known Flamco BSF brackets, made from RVS 316 stainless steel. Sizes range from 3 8 to 8. All BSA SS and BSF SS types are fitted with stainless steel 1 2 / M 10 combinut. Stainless steel mountings Versions and s of BSA SS brackets Pipe outer diameter Ø from to... workload* at 19 db(a) mm inch N mm BSA 14-16 SS 14-16 - 1 /2 / M 10 1000 25 x 1.75 51951 BSA 17-19 SS 17-19 3 /8 1 /2 / M 10 1000 25 x 1.75 51952 BSA 20-24 SS 20-24 1 /2 1 /2 / M 10 1000 25 x 1.75 51953 BSA 25-28 SS 25-28 3 /4 1 /2 / M 10 1000 25 x 1.75 51954 BSA 33-37 SS 33-37 1 1 /2 / M 10 1000 25 x 1.75 51956 BSA 38-42 SS 38-42 1 1 /4 1 /2 / M 10 1000 25 x 1.75 51957 BSA 44.5-49 SS 44.5-49 1 1 /2 1 /2 / M 10 1000 25 x 1.75 51958 BSA 50-54 SS 50-54 - 1 /2 / M 10 1000 25 x 1.75 51959 BSA 56-60 SS 56-60 2 1 /2 / M 10 1000 25 x 1.75 51960 BSA 62-64 SS 62-64 - 1 /2 / M 10 1750 25 x 2.75 51970 BSA 75-80 SS 75-80 2 1 /2 1 /2 / M 10 1750 25 x 2.75 51972 BSA 89-91 SS 89-91 3 1 /2 / M 10 1750 25 x 2.75 51974 BSA 108-116 SS 108-116 4 1 /2 / M 10 1750 25 x 2.75 51977 BSA 121-127 SS 121-127 - 1 /2 / M 10 1750 25 x 2.75 51979 BSA 159-162 SS 159-162 - 1 /2 / M 10 1750 25 x 2.75 51981 Versions and s of BSF SS brackets * In order to guarantee efficient noise reduction we advise that the specified load of the bracket should not exceeded! Pipe outer diameter Ø from to... workload mm inch N mm BSF 13-17.5 SS 13-17.5 3 /8 1 /2 / M 10 1650 20 x 2,5 51851 BSF 21-25.5 SS 21-25.5 1 /2 1 /2 / M 10 1650 20 x 2,5 51852 BSF 26.5-30.5 SS 26.5-30.5 3 /4 1 /2 / M 10 1650 20 x 2,5 51853 BSF 33.5-38.5 SS 33.5-38.5 1 1 /2 / M 10 1650 20 x 2,5 51854 BSF 41.5-47 SS 41.5-47 1 1 /4 1 /2 / M 10 1650 20 x 2,5 51855 BSF 48-54 SS 48-54 1 1 /2 1 /2 / M 10 1650 20 x 2,5 51856 BSF 56-62.5 SS 56-62.5 2 1 /2 / M 10 1650 20 x 2,5 51857 BSF 69.5-76.5 SS 69.5-76.5 2 1 /2 1 /2 / M 10 1650 20 x 2,5 51859 BSF 77.5-84 SS 77.5-84 - 1 /2 / M 10 1650 25 x 3 51860 BSF 85-92.5 SS 85-92.5 3 1 /2 / M 10 1650 25 x 3 51861 BSF 93-100.5 SS 93-100.5-1 /2 / M 10 3000 25 x 3 51862 BSF 101.5-110 SS 101.5-110 - 1 /2 / M 10 3000 25 x 3 51863 BSF 110-117.5 SS 110-117.5 4 1 /2 / M 10 3000 25 x 3 51864 BSF 119.5-127.5 SS 119.5-127.5-1 /2 / M 10 3000 25 x 3 51865 BSF 127.5-133.5 SS 127.5-133.5-1 /2 / M 10 3000 25 x 3 51866 BSF 134.5-142.5 SS 134.5-142.5 5 1 /2 / M 10 4000 30 x 3 51867 BSF 143.5-150.5 SS 143.5-150.5-1 /2 / M 10 4000 30 x 3 51868 BSF 151.5-159.5 SS 151.5-159.5-1 /2 / M 10 4000 30 x 3 51869 BSF 163.5-171.5 SS 163.5-171.5 6 1 /2 / M 10 4000 30 x 3 51870 BSF 172.5-182 SS 172.5-182 - 1 /2 / M 10 4000 30 x 3 51871 BSF 192.5-198 SS 192.5-198 - 1 /2 / M 10 4000 30 x 3 51872 BSF 215-220 SS 215-220 8 1 /2 / M 10 4000 30 x 3 51873 BSA - SS BSF - SS 9.5
Stainless steel mountings RAIL R SS, RAIL CONSOLES R.x... SS, (SLIDING) NUTS SS and WASHERS - SS With Rail SS, easy and quick assembly with adjustment facility Rail consoles SS, for horizontal or vertical attachment for support or suspension. Secure mounting. (Sliding) nuts SS and washers SS for easy assembly of a suspension in Flamco rail. Sliding nuts SS and washers - SS can be tilted inside the Flamco rail at the point of suspension. Next, turn a quarter turn and tighten using a nut. Versions and s rail R - SS Dimensions in mm h b d e s t R 1 - SS 15 30 2 7.0 14.5 10.5 50030 R 4 - SS 46 35 2.5 22.7 14.5 13.5 50034 Versions and s rail consoles R.x... SS Flamco rail Dimensions in mm L A R 1 x 100 - SS R 1 - SS 100 80 71671 R 1 x 200 - SS R 1 - SS 200 80 71672 R 1 x 300 - SS R 1 - SS 300 90 71673 R 1 x 400 - SS R 1 - SS 400 90 71674 R 4 x 300 - SS R 4 - SS 300 90 71683 R 4 x 500 - SS R 4 - SS 500 90 71686 R 1 - SS Versions and s sliding nuts M..s - SS Suitable for Flamco rail M 8s - SS M 8 R 1 - SS, R 4 - SS 80322 M 10s - SS M 10 R 1 - SS, R 4 - SS 80323 Versions and s washers S - SS Suitable for Flamco raill S 8 - SS M 8 R 1 - SS, R 4 - SS 70822 S 10 - SS M 10 R 1 - SS, R 4 - SS 70823 S 12 - SS M 12 R 1 - SS, R 4 - SS 70824 R 4 - SS Versions and s nuts M - SS M 8 - SS M 8 70222 M 10 - SS M 10 70223 M 12 - SS M 12 70224 WASHER - SS RAIL CONSOLE - SS SLIDING NUT - SS M - SS 9.6
THREADED RODS D SS, SCREWS STUDS HO SS, BASE PLATES GP SS, CAPTIVE BOLT SETS HBS SS, ANCHOR BOLT SS and INNER HEXAGON SCREW SS rod D SS for all applications with threaded rods. Screw Studs HO SS for attaching BRS, BSA-SS, BSF-SS or BRS-A brackets. Base plates GP SS for rigid attachment to wall or ceiling of brackets with threaded rod or threaded. Stainless steel mountings Versions and s threaded rods D - SS Length m workload N D 8 - SS M 8 1 4500 70052 D 10 - SS M 10 1 7000 70053 D 12 - SS M 12 1 10000 70054 D - SS Versions and s screw studs HO - SS Length mm HO 8 x 60 - SS M 8 60 70620 HO 8 x 80 - SS M 8 80 70621 HO 8 x 100 - SS M 8 100 70624 HO 10 x 80 - SS M 10 80 70622 HO 10 x 100 - SS M 10 100 70625 HO 10 x 120 - SS M 10 120 70626 HO - SS GP - SS Versions and s base plates GP - SS Dimensions in mm A B H D E slotted holes GP 8 / 10-70 x 20 - SS M 8 / 10-20 70-3 9 x 14 3351.27 GP 8-80 x 30 - SS M 8 54 30 80 11 3 9 x 14 39445 GP 10-80 x 30 - SS M 10 54 30 80 13 3 9 x 14 39446 GP 1 /2 / 10-80 x 30 - SS 1 /2 / M 10-30 80-3 9 x 14 5392.20 GP 1 /2-80 x 30 - SS 1 /2-30 80-4 9 x 14 5392.22 GP 3 /4-120 x 40 - SS 3 /4 85 40 120 21 4 11 x 14 39442 HBS - SS Versions and s captive bolt sets HBS - SS Dimensions in mm A B C D E HBS - SS 8 x 30 M 8 x 30 25 20 6.5 13.5 30 70471 HBS - SS 8 x 40 M 8 x 40 25 20 6.5 13.5 40 70472 HBS - SS 10 x 40 M 10 x 40 25 20 6.5 13.5 40 70483 HBS - SS 10 x 60 M 10 x 60 25 20 6.5 13.5 60 70484 Versions and s anchor bolt - SS Anchor bolt - SS M 8 70221 Anchor bolt - SS M 10 70222 Anchor bolt - SS M 12 70223 Versions and s inner hexagon screw - SS Dimensions in mm BZS - SS M 8 x 16 61725 BZS - SS M 10 x 16 61727 BZS - SS M 12 x 16 61729 ANCHOR BOLT - SS BZS - SS 9.7
STAINLESS STEEL MOUNTINGS BRS-A CONTENTS PAGE Flamco mounting material in SS 9.2/9.3 Charts and technical data 9.4/9.7 Flamco UK Limited Unit 4, St. Michael s Road Lea Green Industrial Estate St. Helens, Merseyside WA9 4WZ BSF - SS Tel.: +44 (0) 1744 818100 Fax: +44 (0) 1744 830400 info@flamco.co.uk www.flamco.co.uk RAIL R - SS There is more information on the CD that GP - SS accompanies this brochure. Copyright Flamco UK Limited. No part of this publication may be reproduced or published in any way without explicit mention of the source. The data listed are solely applicable to Flamco products. Flamco UK Limited shall accept no liability whatsoever for incorrect use, application or interpretation of the technical information. Flamco UK Limited reserves the right to make technical alterations Flamco UK Limited conditions of sale apply. 18502550