The ibox universal Planning and installation 1
The ibox universal One for all Introduction ibox universal The revolution in concealed installation continues 4 The basis for all standard and thermostat solutions 6 Proved a million times and improved three times over 8 Raindance Rainfall 10 Raindance Shower panel 12 imodul 14 Installing the ibox universal 16 Installing the standard fi nish set 17 Piping and compatibility 18 Installation methods 19 Installation options 20 Installation tips, planning guidelines, instructions 25 Dimensioned drawings and technical information 26 Product overview Hansgrohe faucet lines 28 Product overview Axor Collections 30
The ibox universal The revolution in concealed installation continues In a small bathroom your are limited in space and loose out on the showering pleasure. A concealed installation will provide you with more space, because fl ush mounting means a less intrusive fi nish, leaving more room to move around. With the ibox universal, Hansgrohe off ers a fl exible concealed installation system which allows a basic unit built into the wall to be connected to various diff erent faucet fi nish sets. Introduced in 2001, the ibox universal is still the fi rst and only basic set for all standard and thermostat solutions. It can be connected up for several diff erent attachments, and is also amazingly fl exible no wonder it has set the standard and taken the market by storm over the last six years! In order to keep it in the lead position in future, Hansgrohe has worked closely with experienced installers to refi ne and improve the ibox universal, adapting it to changing needs. The following pages present details of the changes and show which aspects of this tried and tested technology have remained the same. One thing never changes, however: the part number stays the same. Exposed installation Concealed installation 4
5
The ibox universal The basis for all manual and thermostatic solutions One ibox universal for everything. That means: One basic set for nine diff erent functional solutions One basic set for all Axor and Hansgrohe faucet lines You only need to keep one concealed installation basic set in stock One basic set that fi ts all installation systems, connection types and fi ttings Homeowners have more time to choose faucets, because they do not have to choose a particular faucet range before the basic set is installed. 1. Raindance Rainfall Horizontal overhead shower panel with three diff erent spray modes: 240 mm overhead shower, wide fl ood jet and swivel massage jets. Mounting requires two ibox universal basic sets. 2. Ecostat S concealed installation thermostat With MTC cartridge, free through-flow at 3 bar: 43 l/minute. Also available as a Highflow model, free through-flow at 3 bar: 58 l/minute. For installation in showers or over bathtubs. Requires at least one additional shut-off valve. 6. Raindance shower panel With MTC cartridge and integrated shut-off and diverter valve, free through-fl ow at 3 bar: Shower outfl ow 17 l/ minute, side shower outfl ow 19 l/minute. For installation in the shower or over the bathtub (end wall), to serve the hand shower and eight side showers. The two functions can be used either separately or in parallel. Can be mounted only if connected to an ibox universal. 7. imodul For installation in the shower, shut-off valve and Quattro diverter valve pre-assembled, with connections for six side showers, one overhead shower and one hand shower. 3. Ecostat S concealed installation thermostat With integrated shut-off valve, with MTC cartridge, free through-fl ow at 3 bar: 26 l/minute. For installation in showers or over bathtubs, to serve one attachment, e.g. an overhead shower. 4. Ecostat S concealed installation thermostat With integrated shut-off and diverter valve, with MTC cartridge, free through-fl ow at 3 bar: 26 l/minute. For installation in showers or over bathtubs, to serve two diff erent attachments, e.g. a hand shower and an overhead shower. 8. Single lever concealed installation bath mixer With M2-ceramic cartridge, free through-fl ow at 3 bar: Bathtub outfl ow 31 l/minute, shower outfl ow 24 l/minute. For installation in showers, but usually over a bathtub, to serve two functions, usually hand shower and spout. Also available with integrated safety combination as per DIN EN 817, which means it is not necessary to have an additional external pipe interrupter. 9. Single lever concealed installation shower mixer With M2-ceramic cartridge, free through-fl ow at 3 bar: 32 l/minute. For installation over bathtubs, but mainly in showers, to serve one attachment, usually the hand shower. 5. Ecostat S thermostat concealed installation With electronic Start/Stop button, with MTC cartridge, electronic time control, free through-fl ow at 3 bar: 26 l/minute. For installation in the shower, to serve one attachment, usually a hand or overhead shower. 6
1. 9. 2. 3. 8. 4. 7. 5. 6. 7
The ibox universal Proved a million times and improved three times over Can technology as trusted and reliable as the ibox universal really be improved? Hansgrohe, the leading innovator in concealed installation technology, answers with a three-fold Yes and, with the modifi ed ibox universal, presents three new technical developments. 170 150 NEW Smaller collar diameter The new, minimalist faucet design requires not only fi ligree operating handles but also a smaller collar. Therefore, when changing to the new faucet lines, Hansgrohe reduced the collar diameter of the concealed installation mixer by 20 mm, yet still keeping it fully compatible with the ibox universal. The diverters in the bath mixer were also reduced in size. The result: a consistent look and harmonious proportions. Depth 72 mm NEW Depth 64 mm Depth 56 mm Without ring, designed fordry wall installation Single installation ring Flexible adjustment ring The new ibox universal has a patented fl exible adjustment ring that can be precisely adapted by bayonet fi tting to fi t three diff erent depths. This makes it much more versatile, as you now have the freedom to mount it on walls of varying thickness. It also means that the ibox universal can be used for dry wall installations. For pre-fabricated housing, it can easily be pushed through the wall from the rear and then fi xed in place. NEW min. 80 Reduced installation depth When the walls are thin, every millimetre counts. With a body that is now 2 mm fl atter 80 mm instead of 82 mm the ibox universal has become even more suitable for walls with limited installation depth. 8
Revolutionary technology, that has everyone excited Built in rotational symmetry The ibox universal s symmetrical structure makes all connections equal. The important thing is to make sure that the cold water is connected on the right and the hot water opposite it. When the ibox universal is used as a shower mixer, either the upper or lower outfl ow can be connected. Multiple installation options Coordinated with all current installation systems and all types of connections and fi ttings, the ibox universal off ers truly universal installation possibilities, with its fl exible adjustment ring and the ability to be fi xed at two levels and DN20 connections. Safe and economical The universal basic set contains just the connection block. The valuable function block is supplied later, together with the fi nish set, when it is installed. This makes expensive warehousing unnecessary and prevents problems like theft, dirt or frost occurring during the building phase. Everything included Concealed single lever bath mixer with integrated safety combination for spout, with overfl ow and waste system (Exafi ll). Hansgrohe s universal integrated safety combination means it is not necessary to use an external pipe interrupter, which reduces installation costs and maintenance expenses. Sealed all round Rubber seals on all four connections and the supporting collar which seals against splashing water protect the wall perfectly from moisture from any direction. Soundproof The brass body of the ibox universal rests on seals, so that the sound of water-conducting parts cannot be transferred through the wall. Screwing the supporting collar to the ibox universal housing and not to the function block prevents sound being transferred through to the ceramic tiles. Simplifi ed rinsing The fl ushing block supplied with the ibox universal, which can be mounted in diff erent positions, makes it easy to fl ush pipes through to where they fi nish at the wall, as recommended by DIN 1988. 105 25 min. 58 80 22 Basic unit extension Even if the ibox universal has been fi tted too deep into the wall, Hansgrohe has a solution at the ready. The basic unit extension is fi tted between the connector and the function block. The extension set ensures safety right up to the wall, keeping the walls free from dampness, even in this tricky situation. Reduction kit Thanks to the reduction kit, even limited installation depths are not a problem. The reduction kit is fi tted between the tiles and the fi nish set, making it possible to fi t the ibox universal in despite the lack of depth. 9
Raindance Rainfall Extraordinary Shower Fun, simple installation Experience water in all its original magnifi cence. Rainfall is a horizontal overhead shower panel with three attachments, each of which can be individually controlled from the wall: Overhead shower, massage shower and flood jet. The ibox universal forms the basis of this easy-to-install system and is used twice for both the thermostat and the overhead shower panel. Together with the Quattro diverter valve and a shut-off valve, this shower installation guarantees perfect spray performance. + + 4. 3. 2. 1. 1. ibox universal (# 01800180) To connect to the hot and cold water pipes and to accommodate the central thermostat element and/or fi nish set 2. Shut-off valve (# 15973180) To control the amount of water manually 3. Quattro diverter valve (# 15930180) To control the three diff erent spray modes manually 4. ibox universal (# 01800180) To mount the Raindance Rainfall securely and accommodate the various diff erent pipes required for the spray modes and the appropriate functional unit. The fourth outfl ow on the ibox universal is lengthened a little to enable secure mounting, and is simply plugged up, as this part of the pipe is not water-conducting. 10
115
Raindance Shower panel Ultra flat, ultra easy to install The ibox universal makes it possible. As well as being the first-ever concealed installation shower panel, Raindance is also the world s flattest shower panel, with only 33 mm between it and the wall. You can imagine how easy it is to install: just set the ibox universal in place, mount the shower panel on top, and voilà all done! Super easy to install, and super multi-mode Shower Fun. Thanks to the extra-large hand shower, the eight eff ective side showers and the diverse spray modes, anything is possible, from the a luxurious rain shower to a powerful whole body massage. + 12
13
imodul The quick way to the shower family Ready cased, the imodul with the ibox universal is the ideal concealed installation base for all system elements in the Raindance shower families. Unlike preassembled shower cabins, a shower family like this can be set up and completed on location, just as the client wishes, according to technical requirements and how it looks once it is in place. After fi xing the imodul in place, the only task remaining before tiling is to connect the cold and hot water. At the end, the thermostat finish set and selected shower family are installed and everything is ready to use, promising the ultimate in individualised showering pleasure. It could not be easier or quicker! Installation on the wall Installation directly into Wall Mounting on a carrier system, e.g. GIS by Geberit Installation in an individual wooden frame 14
15
Installing the ibox universal Everything included ibox universal, supporting collar, 3 reducing adapters, fl ushing block, construction protection cap, 1 plug for skeleton installation Exafi ll bath spout (with drain and overfl ow system), assembly instructions. No need to order additional accessories! Installation tip To drill connections in, clamp the ibox universal in the vice using a pipe insert with a ¾" thread. In the correct position With the help of the affi xed positioning aids, it is easy to mount the ibox universal in exactly the right position. Properly connected Coordinated with all current pipework systems, the fi ttings can be grouted to the ibox universal immediately. Coordinates with all installation systems The two fi xing levels and the wide range of ways it can be fi xed in place make the ibox universal compatible with all current installation systems. Rinsing meets DIN 1988 standard The fl ushing block, which is included in the delivery, makes it possible to fl ush the pipes in any targeted direction. Exafi ll plug for outfl ow This plug makes it possible to turn off the water to the inlet pipe after checking the pipe system and fi lling the bathtub, yet maintain the pressure in the pipe system. 127 mm circle cutter The deliberately chosen round shape of the ibox universal makes it possible for a circle cutter to be used. This enables recesses to be created quickly and precisely in the cladding of the installation mounted on the wall or in the tiles. Supporting collar for installation mounted on the wall To ensure that an installation mounted on the wall is totally watertight, press the supporting collar into PCI Lastogum, or a sealing compound which is similar according to the manufacturer s details, spread onto the wall. 16
Installing the standard finish set ibox universal Everything s ready bathing fun coming up soon: function block, mounting screws, supporting collar, handle cartridge, grip adapter, handles and assembly instructions. 28 mm ceramic tile adjustment After the tiles are in place, cut away the protruding edge of the ibox universal 2 mm in front of the tiles using a knife. This ensures absolute tightness of the seal between the ibox universal and where the wall was penetrated. Spray join with silicon To ensure that the seal is also tight against splashed water, spray the join between the ibox universal and the tiles with silicon. Disassemble rinse block Before installing the function block, disassemble the rinse block by undoing the Allen screw. Remember to shut off the water! Installation function block Using the mounting screws provided, screw the function block to the connecting block. Screw supporting collar together Use plastic screws to screw the supporting collar to the housing of the ibox universal. This ensures that the soundproofi ng carries all the way through to the ceramic tiles. The sponge rubber seal keeps splashes of water from being absorbed, including into the grooves and gaps. Easy to fi t face plate Simply fi t the face plate over the supporting collar no screws or bolts needed. The sponge rubber, which protects against splashed water, and the O-rings at the openings for the handle cartridges guarantee a fi rm hold. Securing the handles Finally, put the handles in place and screw them in. Completion The ibox universal and the desired fi nish set can be installed in the shortest possible time and without the hassle of having to order accessories such as fl ushing plugs or items to help you secure things in place, depending on which installation method you use. 17
Piping and compatibility The ibox universal is compatible with all current pipework systems. Here, the installation of a bathtub provides an opportunity to show pipework systems from different manufacturers. (These items are not available from Hansgrohe). Bathtub installation with Geberit Mepla Supplies Hot and Cold potable water: 2 pces Junction bracket with AG No. 602.253.00.1 20xR¾" Bathtub outfl ow / Shower outfl ow: 2 pces Junction with AG No. 602.536.00.1 20xR¾" 1 pce Faucet connection for spout No. 602.294.00.1 20xR¾" 1 pce Faucet connection for shower connection No. 602.293.00.1 20xR½" Bathtub installation with Mapress stainless steel Supplies Hot and Cold potable water: 2 pces Junction bracket with male thread 18-R½" Item No. 33834 Bathtub outfl ow: 1 pce Junction with male thread 22-R¾" Item No. 31701 1 pce 90 bend DN 20 Item No. 30104 1 pce 45 bend with single-sided insert end DN 20 Item No. 30704 1 pce Ceiling bracket with female thread 22-Rp¾" Item No. 30407 Shower outfl ow: 1 pce Junction with male thread 18-R½" Item No. 31704 1 pce Ceiling bracket with female thread 18-Rp½" Item No. 30405 Bathtub installation with GF Instafl ex Supplies Hot and Cold potable water: 2 pces Junction bracket 90 with male thread 16 ¾" Item No. 760 854 839 Bathtub outfl ow: 1 pce Junction with male thread 20 ¾" Item No. 760 853 138 1 pce Faucet connection with female thread 20 ¾" Item No. 760 853 038 Shower outfl ow: 1 pce Junction with male thread 16 ¾" Item No. 760 853 108 1 pce faucet connection with female thread 16 ½" Item No. 760 853 013 Bathtub installation with Viega Profi press Supplies Hot and Cold potable water: 2 pces 90 Bracket with male thread 15 x ½" model 2214.1 Item No. 335 281 Bathtub outfl ow: 1 pce Junction with male thread 18 ¾" Model 2211 Item No. 283 230 1 pce Wall disc 18 ¾" Model 2225.5 Item No. 335 236 Shower outfl ow: 1 pce Junction with male thread 15x ¾" Model 2211 Item No. 287 764 1 pce Wall disc 15 ½" Model 2225.5 Item No. 107 345 Bathtub installation with Geberit GIS ibox universal Set Supplies Hot and Cold potable water: 2 pces MeplaFix Bracket (PVDF) DN15 Item No. 632.272.00.5, or 2 pces MeplaFix Bracket (PVDF) reduced DN15/12 Item No. 31.272.00.5 Bathtub outfl ow: 1 pce MeplaFix Coupling (PVDF) DN15 Item No. 632.562.00.5 1 pce Mepla Faucet connection (Red brass) DN15x R¾" Item No. 602.294.00.5 Shower outfl ow: 1 pce MeplaFix Coupling (PVDF) DN15 Item No. 632.562.00.5 1 pce Mepla Faucet connection (Red brass) DN15x R½" Item No. 602.293.00.5 The GIS ibox universal set is optimally adjusted to make installation of the ibox universal effi cient and trouble-free. The GIS ibox universal set is a pre-assembled unit and comprises: Mounting plates with pre-assembled attachment levers for fast mounting onto GIS profi les by the circular screen principle, rotating 90 degrees at a time Pre-assembled ibox universal 2 reducers to ½" male screw thread to connect the Mepla piping, using MeplaFix, e.g. for hand shower and bathtub supply 1 loose enclosed plug, in case only one attachment is to be connected 18
Installation methods Installation on the wall Installation in front of the wall. Shown here with M 10 stock screws as variable spacers. Mounting on a carrier system Installation on prefabricated house mounting plates or fi nished cells Installation directly into the wall Installation with mounting rail set 19
Installation options Bath mixer with integrated safety combination Function guaranteed from Thermostat with shut-off and diverter valve / Bath mixer Function guaranteed from Wanneneinlauf Function guaranteed from 20
Thermostat with shut-off valve / Shower mixer DN 20 (3/4") Function guaranteed from DN 15 (1/2") TWW Hot DN 15 (1/2") TW Cold DN 15 (1/2") Function guaranteed from Thermostat with shut-off valve/shower mixer/raindance shower panel DN 20 (3/4") DN 15 (1/2") 1 TWW Hot DN 15 (1/2") TW Cold DN 15 (1/2") 2 21
Installation options Shower thermostat with electronic Start/Stop button / Thermostat with shut-off valve / Shower mixer Function guaranteed from DN 20 (3/4") Function guaranteed from Thermostat with shut-off and diverter valve / Bath mixer 1 2 DN 15 (1/2") Function guaranteed from DN 15 (1/2") TWW Hot DN 20 (3/4") TW Cold DN 20 (3/4") Function guaranteed from 22
Thermostat 2 1 Function guaranteed from 3 DN 20 (3/4") >50 l/min. Rain Drain Ø 70 Highflow thermostat 1 2 Function guaranteed from 23
Installation options Highflow thermostat combined with Raindance Rainfall DN20 (¾") bar Quattro Concealed valve Function guaranteed from 1 Rain/Whirl 2 Flow >50 l/min. Rain Drain Ø 70 Highflow thermostat combined with Raindance Rainmaker >50 l/min. Concealed valve Quattro Trio Stop Function guaranteed from 1 Rain AIR 2 Rain AIR XXL 3 Whirl AIR 1 + 3 Rain AIR + Whirl AIR 2 + 3 Rain AIR XXL + Whirl AIR 4 Hand shower 5 Side showers Rain Drain Ø 70 24
Installation tips, planning guidelines, instructions Installation tip To drill connections in, clamp the ibox universal in the pipe insert using a vice. Skeleton installation Build in the basic unit in such a way that the hot water is connected on the left and the cold water is on the right. Installation depth 80 mm to 108 mm Extension set 25 mm Item No. 13595000 Extension set 22 mm Item No. 13596, -000, -810, -880 Item No. 13597, -000, -880 Item No. 97407000 The basic unit can be installed according to the needs of the site. The ibox universal is suitable for both bathtubs and showers. For single lever bath mixers, outflow 1 takes priority. For shower installations, the outflow that is not required must be sealed with a plug. The ibox rotational symmetry basic unit can be used anywhere, either horizontally or vertically, except for installation of a bath faucet with safety combination, where only vertical mounting is possible. Rinsing Rinse the whole installation in accordance with DIN 1988/EN 1717. The arrows on the rinsing block show which supply pipe is connected to which outfl ow pipe, e.g. cold water with outfl ow 1 and hot water with outfl ow 2. If only one outfl ow is required, the rinse block must be rotated 90 after the fi rst rinsing process. Hot Outfl ow 2 Outfl ow 1 Cold ibox universal in combination with an Exafi ll spout with drain and overfl ow system Turning off the water to the Exafi ll during the construction phase Skeleton installation 1. Install ibox universal (vertically only) 2. Lay connections to Exafi ll and fi t metal plugs 3. Rinse pipes and test for pressure and leaks Placing bathtub 1. Turn off water 2. Mount bathtub with Exafi ll and connect to pipes 3. Rinse pipe to Exafi ll with test spout extensions and check whether it is watertight and check whether it is watertight 4. Turn off water at water meter on fl oor of building 5. Disassemble rinse block 6. Insert plug (A) in outfl ow for Exafi ll 7. Assemble rinse block 8. Turn on water These easy to understand, illustrated assembly instructions with many practical tips in paperback format can be ordered directly from Hansgrohe. # 84000928 25
Dimensioned drawings and technical information ibox universal technical information Operating pressure: max. 1 MPa recommended operating pressure: 0.1 0.5 MPa Test pressure: 1.6 MPa (1 MPa = 10 bar = 147 PSI) Hot water temperature: max. 80 C Recommended hot water temperature: 65 C Connection dimension: G ¾" Connections: cold right, hot left Free through-fl ow at 0.3 MPa Bath mixer bathtub outfl ow: 31 l/minute. Bath mixer shower outfl ow: 24 l/minute. Shower mixer: 32 l/minute. Thermostat: 43 l/minute. Thermostat with shut-off valve: 26 l/minute. Thermostat with shut-off and diverter valve: 26 l/minute. Highfl ow thermostat: 58 l/minute. Quality mark: DVGW, SVGW ibox universal front and side view ibox universal Outfl ow 2 e.g. shower Cold Hot SW 5 mm Outfl ow 1 e.g. bathtub 35x2 9x2 Extension 25 mm Extension 22 mm (at low installation depth) 26
Raindance Shower panel Front and side view Raindance Rainfall View from below and side view Room Height Standing Area Cement Floor imodul Front and side view 27
Product overview Hansgrohe faucet lines Metropol S Metropol E Metris S Metris E Talis S # 14061, -000, -880 # 14070, -000, -090 # 31060, -000 # 31070, -000 # 32020, -000 Talis S 2 Talis E 2 Focus S Focus E # 32040, -000 # 31612, -000 # 31701, -000 # 31700, -000 Ecostat S Ecostat E ibox universal Thermostat fi nish set # 15711, -000, -880 Thermostat fi nish set # 15710, -000, -090, -880 ibox universal # 01800180 Extension basic set # 13595000 Extension fi nish set (Ø 170 mm) # 13596000 Extension fi nish set (Ø 150 mm) # 13597, -000, -880 Mounting rail set # 96615000 28
Hansgrohe finish sets Single lever mixer Metropol S Metropol E Metris S Metris E Talis S Single lever concealed installation bath mixer 14465 14475 31465 31475 32475 Single lever concealed installation bath mixer, safety combination 14466 14477 31466 31476 32477 Single lever concealed installation shower mixer 14665 14675 31665 31675 32675 Available with the following surfaces Chrome, Satin Chrome Chrome, Chrome/ Gold-optic Chrome Chrome Chrome Talis S 2 Talis E 2 Focus S Focus E Single lever concealed installation bath mixer 32475 31645 31743 31744 Single lever concealed installation bath mixer, safety combination 32477 31646 Single lever concealed installation shower mixer 32675 31666 31763 31761 Available with the following surfaces Chrome Chrome Chrome Chrome These products are available only with a collar diameter of 150 mm. Thermostats Ecostat S Ecostat E Concealed installation thermostat 15711 15710 Highflow concealed installation thermostat 15715 Concealed installation thermostat with shut-off valve 15701 15700 Concealed installation thermostat with shut-off and diverter valve 15721 15720 Concealed installation shower thermostat with electric Start/Stop button 15740* 15740* Available with the following surfaces Chrome, Satin Chrome, Available only in Steel Chrome, Chrome/ Gold-optic Available only in Chrome Please always include the surface finish at the end of each order number: -000 Chrome, -090 Chrome/Gold-optic, -800 Steel, -880 Satin Chrome 29
Product overview Axor Collections Axor Starck Axor Starck Classic Axor Starck X Axor Citterio # 10111, -000 # 10010, -000 # 10070, -000 # 39010, -000 Axor Massaud Axor Uno 2 Axor Uno Axor Steel # 18020, -000 Twin handle basin mixer # 38040, -000 # 38000, -000 # 35002, -800 Axor Terrano Axor Carlton Axor Montreux Twin handle basin mixer # 37030, -000, -810 # 17010, -000, -090, -120, -810 Twin handle basin mixer # 16502, -000, -820, -830 30
Axor finish sets Axor Starck Axor Starck Classic Axor Starck X Axor Citterio Axor Massaud Single lever concealed installation bath mixer 10416 10415 10445 39455 18455 Single lever concealed installation bath mixer, safety combination 10418 10417 10447 39457 18457 Single lever concealed installation shower mixer 10616 10615 10645 39655 18655 Concealed installation thermostat 10710 10710 10716 18740 Concealed installation thermostat, cross handle 39715 Concealed installation thermostat, lever handle 39710 Highflow concealed installation thermostat 10715 10715 10717 18741 Highflow concealed installation thermostat, cross handle 39716 Highflow concealed installation thermostat, lever handle 39711 Concealed installation thermostat with shut-off valve 10700 10700 10706 18745 Concealed installation thermostat with shut-off valve, cross handle 39705 Concealed installation thermostat with shut-off valve, lever handle 39700 Concealed installation thermostat with shut-off and diverter valve 10720 10720 10726 18750 Concealed installation thermostat with shut-off and diverter valve, cross handle 39725 Concealed installation thermostat with shut-off and diverter valve, lever handle 39720 Available in the following surfaces Chrome Chrome Chrome Chrome Chrome Axor Axor Uno 2 Uno Axor Steel Axor Terrano Axor Carlton Axor Montreux Single lever concealed installation bath mixer 38425 35425 37455 17415 Single lever concealed installation bath mixer, safety combination 38427 35427 37417 17417 Single lever concealed installation bath mixer, Zero handle 38405 Single lever concealed installation bath mixer, Zero handle, safety combination 38407 Single lever concealed installation bath mixer, U handle 38415 Single lever concealed installation bath mixer, U handle, safety combination 38417 Single lever concealed installation shower mixer 38625 35625 37655 17615 Single lever concealed installation shower mixer, Zero handle 38605 Single lever concealed installation shower mixer, U handle 38615 Concealed installation thermostat 38375 38375 35710 Concealed installation thermostat, cross handle 37715 17715 16810 Concealed installation thermostat, lever handle 37710 17710 Highflow concealed installation thermostat 38715 38715 35715 Highflow concealed installation thermostat, cross handle 37716 17716 16815 Highflow concealed installation thermostat, lever handle 37711 17712 Concealed installation thermostat with shut-off valve 38700 38700 35700 Concealed installation thermostat with shut-off valve, cross handle 37705 17705 16800 Concealed installation thermostat with shut-off valve, lever handle 37700 17700 Concealed installation thermostat with shut-off and diverter valve 38720 38720 35720 Concealed installation thermostat with shut-off and diverter valve, cross handle 37725 17725 16820 Concealed installation thermostat with shut-off and diverter valve, lever handle 37720 17720 Available in the following surfaces Chrome Chrome Steel Look Chrome, Satinox Chrome, Chrome/ Gold-optic, Satinox, Chrome/ Porcelain Chrome, brushed Nickel, polished Nickel Please always include the surface number at the end of each order number: -000 Chrome, -090 Chrome/Gold-optic, -120 Chrome/Porcelain, -800 Stainless steel look, -810 Satinox, -820 Brushed Nickel, -830 Polished Nickel 31
The ibox universal revolutionised concealed installation, making it safer and easier. Now, working closely with experienced installers, Hansgrohe has re-worked and improved this popular product. So what do these improvements mean for you? Which tried and tested elements have remained the same? And to what extent does the ibox universal make it easier to install Hansgrohe s latest shower innovations? This technical guide provides answers to all your questions about the ibox universal and concealed installation. It also demonstrates the many opportunities that the ibox universal off ers you and your customers when you combine it with Hansgrohe s new shower systems. Visit www.hansgrohe.com to download further technical product information. SOE/en-iBox universal, planning and installation 2007 Subject to technical alterations and colour differences due to the printing process. Form-No. 84 120 163 06/07/3.5 Printed in Germany Printed on 100% chlorine free bleached paper MRH, Freiburg Hansgrohe P.O. Box 1145 D-77757 Schiltach Tel. +49 7836 51-0 Fax +49 7836 51-1300 info@hansgrohe.com www.hansgrohe.com