Knick Elektronische Messgeräte GmbH & Co. KG



Similar documents
Analog signal converters CC-E I/I Current / current isolators

Power Supply and Indicator Unit Type Fig. 1 Type Mounting and Operating Instructions EB 9539 EN

Sanitary Type Electronic Flow Switches

Short Manual. Sensor Calibration. at BlueBox Wireless Sensor System

LED - Indicator Panels

WEA-Base. User manual for load cell transmitters. UK WEA-Base User manual for load cell transmitters Version 3.2 UK

Rosemount 333 HART Tri-Loop

GAE953 Electrical Alarm Unit 19" with Indicator

Installation of Power Supply Monitoring System for Digital Computer Controllers(DCC)

VIBRATION SWITCHES SOLID STATE

Electronic Flow Switches

SMS GSM Alarm Messenger

Multipoint Scanning Alarm System

Controller Automation, Model II+

Schottky barrier quadruple diode

49 Series - Relay interface modules A. Features

EBS852 (Contrac) Power Electronic Unit

Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41

3466 Building Energy Management Training Systems

Short information Parameters are programmed via front-side membrane keypad

Data Sheet 10/ EN. Contrac power electronics Customer specific settings

Rosemount 333 HART Tri-Loop

3500/62 Process Variable Monitor

MS41-22Ex0-R/24VDC MS41-22Ex0-R/115VAC MS41-22Ex0-R/230VAC

Pluggable interface relays CR-P Pcb relays

JUMPFLEX 857 Series ma V ma. Transducers / Relay and Optocoupler Modules

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

Fiber Optic Selector Guide for Analog & Digital Data Links, Contact Closures & Multiplexers

B Recommended land pattern: [mm] SSt. SSt SSt. SSt. SSt SSt SSt. SBa. SSt

Automotive CAN gateway module

Application Requirement

ABB STOTZ-KONTAKT GmbH ABB i-bus KNX Switch Actuators SA/S

Electronic overload relay EF65, EF96 and EF146

PolyGard Carbon Monoxide CO Transmitter ADTX3 1110

JIMAGO 500 Multi-channel Process and Program Controller

VIBRATION MONITORING OF FANS INSTALLED IN ROAD TUNNELS

Isolating Barriers for our sensors A5S1 in Ex-areas Series D461

48 SERIES Relay interface modules 10 A

80 Series - Modular timers 16 A. Features

SYSTEM DESCRIPTION Termination Boards

Input module, input/output module

Elektromotoren und Gerätebau Barleben GmbH

WD-AMX Water Detection Controllers

SVR 12/24V and SVR Akku 12V Installation instructions

Data sheet GIOD.1 Input/output module with CAN bus. ERP no.: Data sheet GIOD.1 V_3.0

Industrial Relays. Interface Relays. peak

Electronic, Digital and Mechanical Vibration Switches

Electronic overload relay EF19 and EF45

In-Line Electronic Flow Switches

Three-phase monitoring relay CM-PFE

The sensor can be operated at any frequency between DC and 1 MHz.

BAT54 series SOT23 Schottky barrier diodes Rev. 5 5 October 2012 Product data sheet 1. Product profile 1.1 General description

Implementation of Energy- Management- Processes and -systems Juergen Runge BERG Energiekontrollsysteme GmbH

EPLAN Electric P8 Basics for GM Course (Version 4.6, dated October, 2015) Course No. GCCE8023, (CTIS: 33090)

PK-01. Standalone door control module. SATEL sp. z o.o. ul. Schuberta Gdańsk POLAND tel

BULLET. Description. Features. WirelessHART Adapter for Use with Wired HART Field Devices

Meter Relays. 077 Series Analogue Meter Relays. Features. Applications

DRTS 33. The new generation of advanced test equipments for Relays, Energy meters, Transducers and Power quality meters

ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories

In-Line Electronic Flow Switches

QFP910. Water detector. Building Technologies. CE1N2732en Synco living

Ω POWEROHM RESISTORS, INC. Braking Resistors for Variable Frequency Drives APPLICATION SELECTING A STANDARD DESIGN CUSTOM RATINGS

Statement of revenues/expenditures and changes in fund balance. Balance sheet. Current financial liabilities. Current financial assets.

keytech keytech 13 FP 2 - What's New

DMX-RELAIS 2 INRUSH. User manual

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.

Logging of RF Power Measurements

SAFETY MANUAL SIL Switch Amplifier

Documentation for. KL2602 and KL2622. Two-channel Relay Output Terminals for 230 V AC / 30 V DC. Version: 1.4 Date:

Automation System TROVIS 6400 TROVIS 6493 Compact Controller

NIVOCONT CONDUCTIVE LEVEL SWITCHES LEVEL SWITCHES

Operating instructions for built-in electronic timers with Day and Week programms. Series 884

QFP910. Water detector. Building Technologies. CE1N2732en. Synco living

Power-monitoring unit PowerLogic System. Technical data sheet. Power Meter Series 800

IMR 6000/10../20../30

Triple single-pole double-throw analog switch

Medium power Schottky barrier single diode

DBS720 / FDS221-R / FDS221-W Sounder base, Alarm sounders

sat-nms SMU Signal Management Unit

Viscotherm sensor electronic differential pressure transmitter electronic viscosity controller electric control valve power supply unit starter box

Speedlink software will run on Windows NT, Windows 7, and Windows 8; it will run on both 32 byte and 64 byte versions of Windows.

TYPE APPROVAL CERTIFICATE

Type: EASY719 DC RC Article No.: Ordering information Relay outputs Quantity 6 Power supply V DC 24 V DC. Description

Process Alarm Solutions

Pump_PT580. Optional. Optional. Modbus. Remote Reset Local Display PLC/DCS PT580-CFG PCM370 DTM96. Buffered Output. Dual Relay Output.

GSM Controller BR160SM-2SMT-4A-A / BR161SM-2SMT-4A-A

CPA PC-Programmable Current/Voltage and RTD/Thermocouple Limit Alarm Trips

Digital inductive conductivity transmitter

Your Advantages For safety application up to PL e / Cat. 4 e.g. SIL 3 Manual or automatic start * see variants. Applications.

OZW30. Central Unit SYNERGYR

Congratulations on purchasing MIDI Delaytion, the Analog Delay Control Station by Molten Voltage

This recommendation was prepared by the Technical Commission of EUROMAP.

CRITICAL MATERIALS HANDLING INVUE INTEGRATED FLOW CONTROLLERS NT6510, NT6520

Series P215PR/RM Direct- and Remote-Mount Pressure-Actuated Condenser Fan Speed Controllers for Single-Phase Motors

MCR-VDC-UI-B-DC. Voltage Transducer for DC Voltages. INTERFACE Data Sheet _en_01. 1 Description

Function Description Device Management in Ascom Systems

PLC-RS /21. PLC INTERFACE With PDT Relay, Universal Version. INTERFACE Data Sheet _en_02. 1 Description

Goodsky Technical Data. Contact Details

SAFETY MANUAL SIL SMART Transmitter Power Supply

Transcription:

DUS n- und Steuerungstechnik GmbH Waldstraße D-0 Netphen-Deuz info@dus-gmbh.de http://www.dus-gmbh.de Company GmbH & Co. KG Street Beuckestraße City Project Project description D- Berlin MAKROS 0_0 Knick Produktmakros http://www.knick.de Status 0-0 Created with EPLAN Electric P8... Manufacturer (Company) Responsible for project DUS n- und Steuerungstechnik GmbH Stefan Hellwig Created on 0.0.0 by (short name) AWE Edit date by (short name) Number of pages Knick Produktmakros Title page / cover sheet = DOC

Macros for Eplan Electric P8 LEGAL NOTICE AND EXCLUSION OF LIABILITY This project is all rights reserved and the intellectual property of the company GmbH & Co. KG Beuckestraße D- Berlin All statements are made with the best intentions and the best of our knowledge and belief. For the correctness and completeness of the specification no adhesion is taken over. No responsibility is accepted for the using of the product data with the CAE system Eplan Electric P8. Project structure This project is a macro project and contains CAE data for Eplan Electric P8. CAE data: Type File name Version File type Macros Knick_ 0_0.zw Parts data Parts_Knick_ 0_0.zw Parts data import file Parts_Knick_ 0_0.xml Data directories:..\eplan\electric P8\...\ Knick Parts data: For all macros parts data have been created. They apply to the internal part selection. For the data exchange between parts data and project / project and parts data the Eplan Electric P8 functions for synchronize parts data will be use. Knick Produktmakros Project description = DOC

Table of contents Sheet description Last editor =DOC/ Title page / cover sheet =DOC/ Project description =DOC/ Table of contents =PARTS/ Parts list =BL 0/ BL 0 =BL / BL =BL 0/ BL 0 =BL 0/ 8 BL 0 =BL _/ 9 BL =BL _/ 0 BL =BL 0/ BL 0 =BL 0/ BL 0 =BL 0/ BL 0 Knick Produktmakros Table of contents = DOC =PARTS/

Parts list device tag = BL 0 = BL = BL 0 = BL 0 = BL _ = BL _ = BL 0 = BL 0 = BL 0 Quantity Designation Type number manufacturer manufacturer's name part number Designation QU Designation Order number supplier supplier name function text BL 0 BL 0 KNICK.BL 0 Standard signal isolating amplifier BL 0 BL BL KNICK.BL Isolators for Standard Signals BL BL 0 BL 0 KNICK.BL 0 Temperature Transmitters BL 0 BL 0 BL 0 KNICK.BL 0 Signal Doublers BL 0 BL BL KNICK.BL Loop-Powered Isolators for Standard Signals BL BL BL KNICK.BL Loop-Powered Isolators for Standard Signals BL BL 0 BL 0 KNICK.BL 0 Set-Point Alarm Relays BL 0 BL 0 BL 0 KNICK.BL 0 Repeater Power Supplies BL 0 BL 0 BL 0 KNICK.BL 0 Universal Isolators BL 0 =DOC/ Knick Produktmakros Parts list = PARTS =BL 0/

Knick\\BL 0\BL 0.ema BL 0 Isolation Amplifiers for Standard Signals - - Blockeigenschaft [] - Knick\\BL 0\BL 0.ema BL 0 Isolation Amplifiers for Standard Signals - - Blockeigenschaft [] - =PARTS/ Knick Produktmakros BL 0 = BL 0 BL /

Knick\\BL \BL.ema BL Isolators for Standard Signals 8 Blockeigenschaft [] - - Current Voltage - Knick\\BL \BL.ema BL Isolators for Standard Signals - 8 Blockeigenschaft [] Current Voltage - - BL 0/ Knick Produktmakros BL = BL BL 0/

Knick\\BL 0\BL 0.ema BL 0 Temperature Transmitters - - Blockeigenschaft [] Sensor-Typ: - Knick\\BL 0\BL 0.ema BL 0 Temperature Transmitters - Blockeigenschaft [] Sensor-Typ: - - BL / Knick Produktmakros BL 0 = BL 0 BL 0/

Knick\\BL 0\BL 0.ema BL 0 Signal Doublers - Blockeigenschaft [] s - - Knick\\BL 0\BL 0.ema BL 0 Signal Doublers - - s Blockeigenschaft [] - BL 0/ Knick Produktmakros BL 0 = BL 0 BL _/ 8

Knick\\BL _\BL.ema BL - - Knick\\BL _\BL.ema BL - - BL 0/ Knick Produktmakros BL = BL _ 9

Knick\\BL _\BL.ema BL Knick\\BL _\BL.ema BL Knick\\BL _\BL.ema BL Variante C - - - - Channel Channel Channel Channel Channel Channel - - Knick\\BL _\BL.ema BL Variante D Knick\\BL _\BL.ema BL Variante E Knick\\BL _\BL.ema BL Variante F - - Channel Channel Channel Channel Channel Channel - - - - Knick Produktmakros BL = BL _ BL 0/ 0

Knick\\BL 0\BL 0.ema BL 0 Set-Point Alarm Relays - Blockeigenschaft [] SPDT n.c. Knick\\BL 0\BL 0.ema BL 0 Set-Point Alarm Relays n.c. Blockeigenschaft [] SPDT - BL _/ Knick Produktmakros BL 0 = BL 0 BL 0/

Knick\\BL 0\BL 0.ema BL 0 Repeater Power Supplies - - Blockeigenschaft [] -0mA -0mA - Knick\\BL 0\BL 0.ema BL 0 Repeater Power Supplies - - Blockeigenschaft [] -0mA -0mA - BL 0/ Knick Produktmakros BL 0 = BL 0 BL 0/

Knick\\BL 0\BL 0.ema BL 0 Universal Isolators - I>mA 00mV/ ma >00mV 8 Blockeigenschaft [] - Knick\\BL 0\BL 0.ema BL 0 Universal Isolators - 8 Blockeigenschaft [] I>mA 00mV/ ma >00mV - BL 0/ Knick Produktmakros BL 0 = BL 0