Annex of the certificate (Page 1/18) Accreditation Scope



Similar documents
Commission communication in the framework of the implementation of the Council Directive 89/336/EEC (2002/C 190/03)

(PREVIEW) Indian Standard COMMON SPECIFICATION FOR HIGH-VOLTAGE SWITCHGEAR AND CONTROLGEAR STANDARDS

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

TEST REPORT EN (1997) +A1 (2001)

IEC and CISPR Standards

STRATO LED Drivers 70W, Single output

Dual Chamber Temporary External Pacemaker

CE MARK TECHNICAL FILE AS/NZS EMC CONSTRUCTION FILE

Espotel Test Laboratory Services. November 20, 2014

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005 1

40 Years of experience in EMC testing

COMMON REGULATORY OBJECTIVES FOR WIRELESS LOCAL AREA NETWORK (WLAN) EQUIPMENT PART 2 SPECIFIC ASPECTS OF WLAN EQUIPMENT

Test Report. Prepared for: Technologic Systems, Inc. Model: TS-8820

INTERNATIONAL STANDARD

EC-Declaration of Conformity Annex

Waveguide Access Point WGA631. Product Guide

EMC STANDARDS STANDARDS AND STANDARD MAKING BODIES. International. International Electrotechnical Commission (IEC)

IEEE Electromagnetic Compatibility Standards (Active & Archive) Collection: VuSpec

Rated Power(W) 8W 2. EG-LED W 3. EG-LED W

Chrome DIN Rail Power Supply 12V 54W 1 Phase (Class II & NEC Class 2) / DRC-12V60W1AG

INTERNATIONAL STANDARD

High Frequency Power Quality

AKKREDITOITU TESTAUSLABORATORIO ACCREDITED TESTING LABORATORY MICROSOFT MOBILE OY TCC MICROSOFT

RM4TG20 three-phase network control relay RM4-T - range V

SINGAPORE CONSUMER PROTECTION (SAFETY REQUIREMENTS) REGISTRATION SCHEME

Chrome DIN Rail Power Supply 24V 30W 1 Phase (Class II & NEC Class 2) / DRC-24V30W1AZ

Thermistor motor protection relays CM-MSS.22 and CM-MSS.23

SCOPE OF ACCREDITATION TO ISO/IEC 17025:2005

CERTIFICATE OF CONFORMITY

Single-phase ( V) voltage monitoring: Undervoltage Overvoltage Window mode (overvoltage + undervoltage) Voltage fault memory selectable

EMC Test for Compliance with EU EMC Directive 2004/108/EU

Test Report #: Date: April 8, 2005

Temperature monitoring relays CM-TCS Monitoring relays for monitoring temperatures with a PT100 sensor (2- or 3-wire connection)

How to Self-Certify For the CE Mark A Quick Start Guide by Dennis King - EMI Test Lab

Chrome DIN Rail Power Supply 24V 91.2W 1 Phase (Class II & NEC Class 2) / DRC-24V100W1AZ

TM7BDM8B expansion block - TM7 - IP67-8 DI/DO - 24V DC A - M8 connector

Cable Solutions for Servo and Variable Frequency Drives (VFD)

TECHNICAL SPECIFICATION FOR GSM MOBILE TERMINALS

TECHNICAL SPECIFICATION FOR BROADBAND WIRELESS ACCESS (BWA) EQUIPMENT

7.5 Watt AC-DC Switch Power Supply

Patient Transport. with the Automated Impella Controller

Foxboro Evo Process Automation System

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

LAB 1 TECHNICAL DOC 3 IN ONE LAB DEVICE. Velleman Legen Heirweg Gavere Belgium

Regulatory Compliance Services and Products

Three-phase monitoring relay CM-PFE

Analog signal converters CC-E I/I Current / current isolators

Electronic timer CT-AHD.12 OFF-delayed with 1 c/o (SPDT) contact

Experience with taximeters with a look at the corresponding tables

Voltage monitoring relays CM-ESS.M For single-phase AC/DC voltages

EMC & Wireless Certification

30 In Compliance October

Nya och reviderade standarder 2014

NMI M 6-2 Electricity Meters. Part 2: Test Report Format

Gas Detector System, Portable/Fixed Oxygen Analysis and Gas Detection Equipment

EMC Standards: Standards of good EMC engineering

ANSI Watthour Meter Testing & Certification Programs

Series AMEPR30-AZ up to 2.5A AC-DC / DC-DC LED Driver / Converter

DATA SHEET DVI - HDCP Extension Cable

Three-phase monitoring relays CM-PSS CM-PSS.31 and CM-PSS.41

TEST REPORT Rapporto di prova EMC N Test facility site: via L. da Vinci, 92, Caravaggio (BG), Italy Sede laboratorio

Telephone- and leased line modem for industrial applications TD-36

ABB 1. Three-phase monitoring relay CM-PFS. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories. Application.

Electronic timer CT-VBS OFF-delayed without auxiliary voltage, for DC contactors Data sheet

Harmonics and Noise in Photovoltaic (PV) Inverter and the Mitigation Strategies

CAT ATC POWER BREAKER & POWER CASE SWITCH AUTOMATIC TRANSFER SWITCH

15 Series - Electronic step relay and dimmer. Features SERIE

ENVIRONMENTAL TEST SPECIFICA- TION FOR INSTRUMENTATION AND AUTOMATION EQUIPMENT

Bulletin 150 Smart Motor Controllers SMC-3 Smart Motor Controller

CONTROLS DATA MANAGEMENT PROCESS AUTOMATION EUROCUBE. General purpose single phase thyristors and solid state relays Product data.

Cisco ASR 9001-S Router

38 Series - Relay interface modules A

Voltage monitoring relays CM-ESS.2 For single-phase AC/DC voltages

RM17TE V AC. Main. Product or component type. Product specific application. Relay monitored parameters 250 V DC 5 A DC

ABB 1 NEW. Three-phase monitoring relay for grid feeding CM-UFS.1. Data sheet. Features. Approvals. Marks. Order data. Order data - Accessories

Fusible Disconnect Switch

Features. Picture. Specifications

PD30ETB20xxIS. Photoelectrics, Background Suppression reflective with IR light. Main features. Description

XPress-Pro SW Series Hardened Ethernet Switches Enabling Communication for the Demanding Industrial Environment

NMI R 118 Testing Procedures and Test Report Format for Pattern Evaluation of Fuel Dispensers for Motor Vehicles (OIML R 118:1995(E), NEQ)

Application Note AN001

Type: DILM115(RAC240) Article No.: Sales text Contactor,55kW/400V,AC operated. Ordering information

ENVIRONMENTAL TESTING

Electromagnetic Compatibility Considerations for Switching Power Supplies

CE Marking and Technical Standardisation

MICROSENS. Central 48 V DC Power Supplies for PoE-Components. Description. Features

RM35UA13MW. range V. Main. Product or component type. Relay monitored parameters

EverFlo. EverFlo Q EN, DE DSF 4/16/08

38 Series - Relay interface modules A

Bulletin 150 SMC Flex Smart Motor Controller Specifications

Energy Management Energy Meter Type EM23 DIN

1756 ControlLogix Power Supplies Specifications

US Installation Manual Smappee Monitor

USB-to-Data Highway Plus Cable

Fired up about safety

OpenWay Radio Frequency FAQ

STEP-PS/1AC/12DC/1.5. Extract from the online catalog. Order No.: DIN rail power supply unit 12 V DC/1.5 A, primary switched-mode, 1- phase

OIML R RECOMMENDATION. Edition 2014 (E) ORGANISATION INTERNATIONALE INTERNATIONAL ORGANIZATION

INTERNATIONAL ELECTROTECHNICAL COMMISSION. Guidance for users of the CISPR Standards

Transcription:

Annex of the certificate (Page 1/18) As a Testing Laboratory Accreditation Nr: Address:Organize Sanayi Bölgesi Büyük Selçuklu Blv. No:2 Sincan 06930 ANKARA / TÜRKİYE Phone : 0 312 267 32 43 Fax : 0 312 267 17 61 E-Mail : eldas@eldas.com.tr Website : www.eldas.com.tr Electrical Laboratory Electricity Metering Equipment Electricity metering equipment (AC)-General requirements, tests and test conditions-part 11: Metering equıpment. All tests Electricity metering equipment (a.c.) - Particular requirements - Part 11:Electromechanical meters for active energy (classes 0.5 1 and 2) All Test Electricity metering equipment (a.c.) - Particular requirements - Part 21: Static meters for active energy (classes 1 and 2) All Tests Electricity metering equipment (a.c.) - Particular requirements - Part 22: Static meters for active energy (classes 0,2S and 0,5S) All Tests Electricity metering equipment (a.c.) - Particular requirements - Part 23: Static meters for reactive energy (classes 2 and 3) All Tests Var-Hour (Reactive Energy) Meters. All Tests Electricity metering (a.c.) - Tariff and Load control - Part 21:Particular requirements for time switches. Electricity metering equipment (a.c.) - Part 1 - General requirements, tests and test conditions - Metering equipment (class indexes A, B and C). All Tests TS EN 62052-11 EN 62052-11 IEC 62052-11 TS EN 62053-11 EN 62053-11 IEC 62053-11 TS EN 62053-21 EN 62053-21 IEC 62053-21 TS EN 62053-22 EN 62053-22 IEC 62053-22 TS EN 62053-23 EN 62053-23 IEC 62053-23 TS 786 IEC 60145 IEC 60145 TS EN 62054-21 EN 62054-21 Article: 7.5.2 TS EN 50470-1 EN 50470-1

Annex of the certificate (Page 2/18) Accreditation Nr: Electrical Laboratory Electricty Metering Equipment (continued) Low Voltage Tests (LVD) Household and similar Electrical Stationary cooking ranges, hobs, ovens and similar appliances. Electricity metering equipment (a.c.) - Part 2 - Particular requirements - Electromechanical meters for active energy (class indexes A and B) All Tests Electricity metering equipment (a.c.) - Part 3 - Particular requirements - Static meters for active energy (class indexes A, B and C) All Tests Household and similar electrical appliances - Safety - Part 1: General requirements Household and similar electrical appliances - Safety - Part 2-6: Particular requirements for stationary cooking ranges, hobs, ovens and similar appliances TS EN 50470-2 EN 50470-2 TS EN 50470-3 EN 50470-3 TS EN 60335-1 EN 60335-1 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) TS EN 60335-2-6 EN 60335-2-6 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) Grills, toasters and similar portable cooking appliances Household and similar electrical appliances - Safety - Part 2-9: Particular requirements for grills, toasters and similar portable cooking appliances TS 2005 EN 60335-2-9 EN 60335-2-9 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) Storage water heaters Household and similar electrical appliances - Safety - Part 2-21: Particular requirements for storage water heaters TS 2212 EN 60335-2-21 EN 60335-2-21 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) Room heaters Household and similar electrical appliances- Safety - Part 2-30: Particular requirements for room heaters TS EN 60335-2-30 EN 60335-2-30 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included)

Annex of the certificate (Page 3/18) Accreditation Nr: Instantaneous water heaters Household and similar electrical appliances - Safety - Part 2-35: Particular requirements for instantaneous water heaters TS 6844 EN 60335-2-35 EN 60335-2-35 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) Pumps Household and similar electrical appliances. Safety - Part 2-41: Particular requirements for pumps TS EN 60335-2-41 EN 60335-2-41 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) Commercial electric dishwashing machines Household and similar electrical appliances - Safety - Part 2-58: Particular requirements for commercial electric dishwashing machines TS EN 60335-2-58 EN 60335-2-58 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) Commercial electric forced convection ovens, steam cookers and steam-convection ovens Household and similar electrical appliances - Safety - Part 2-42: Particular requirements for commercial electric forced convection ovens, steam cookers and steam-convection ovens TS EN 60335-2-42 EN 60335-2-42 (Article 21.1, Article 22.7, Article 23.3 and Article 30.1 included) Information technology equipment Information technology TS EN 60950-1 equipment - Safety Part 1: EN 60950-1 General requirements Equipment for measurement, control and laboratory use Safety requirements for electrical equipment for measurement, control and laboratory use - Part 1: General requirements TS EN 61010-1 EN 61010-1 Sterilizers and washer-disinfectors used to treat medical materials Safety requirements for electrical equipment for measurement, control and laboratory use - Part 2-040: Particular requirements for sterilizers and washer-disinfectors used to treat medical materials TS EN 61010-2-040 EN 61010-2-040

Annex of the certificate (Page 4/18) Accreditation Nr: Electrical equipment of machines Safety of machinery - Electrical TS EN 60204-1 equipment of machines - Part EN 60204-1 1: General requirements Medical electrical equipment Medical electrical equipment - Part-1: General requirements for basic safety and essential performance TS EN 60601-1 EN 60601-1 Arc welding equipment Arc welding equipment - TS EN 60974-1 Part-1: Welding power sources EN 60974-1 Household and similar electrical appliances. Household and similar electrical appliances. Electromagnetic fields. Methods for evaluation and measurement 1Hz - 400kHz 320цT - 80mT TS EN 50366 EN 50366 TS EN 62233 EN 62233 Electric cooking ranges, hobs, ovens and grills for household use. Electric cooking ranges, hobs, ovens and grills for household use. Methods for measuring performance EN 50304+A1/EN 60350 Final Products Environmental testing Tests - TS EN 60068-2-2 Part 2-2: Test B. Dry heat EN 60068-2-2 Environmental testing Tests - Part 2-1: Test A. Cold TS EN 60068-2-1 EN 60068-2-1 Environmental testing Part 2-75: Test methods.test Eh. Hammer tests TS EN 60068-2-75 EN 60068-2 - 75 Degrees of protection provided by enclosures (IP code) TS 3033 EN 60529 EN 60529:A1

Annex of the certificate (Page 5/18) Accreditation Nr: (Final Products, continued) Environmental testing - Part 2-5: Test methods. Test Sa. Simulated solar radiation at ground level and guidance for solar radiation testing TS EN 60068-2 - 5 EN 60068-2 - 5 ( Final Products, continued ) Environmental testing Tests - TS EN 60068-2-6 Part 2-6: Test Fc. Vibration EN 60068-2-6 (sinusoidal) Environmental testing - Part 2-30: Test-Test Db:Damp heat, cyclic ( 12 h +12 h cycle ) TS EN 60068-2-30 EN 60068-2-30 Environmental Testing- Part 2-78: Test metods: Test Cab: Damp heat, steady state Environmental testing Tests - Part 2-27: Test Ea and guidance. Shock TS EN 60068-2-78 EN 60068-2-78 TS EN 60068-2-27 EN 60068-2-27 Fire hazard testing - Part 2-11: Test methods. Glowing/hot-wire based test methods. Glow-wire flammability test method for end-products TS EN 60695-2-11 EN 60695-2-11 Electric irons Household and similar electrical appliances - Safety - Part 2-3: Particular requirements for electric irons IEC 60335-2-3 EN 60335-2-3 TS EN 60335-2-3 Range hoods Household and similar electrical appliances - Safety - Part 2-31 : Particular requirements for range hoods IEC 60335-2-31 EN 60335-2-31 TS EN 60335-2-31 Clothes dryers and towel rails Safety of household and similar electrical appliances-part 2-43:particular requiments for clothes dryers and towel rails IEC 60335-2-43 EN 60335-2-43 TS EN 60335-2-43

Annex of the certificate (Page 6/18) Accreditation Nr: Fans Household and similar electrical appliance- Safety -Part 2-80: Particular requirements for fans IEC 60335-2-80 EN 60335-2-80 TS EN 60335-2-80 High - voltage test techniques for low - voltage equipment High - voltage test techniques for low - voltage equipment - Part 1: Definitions, test and procedure requirements IEC 61180-1 TS EN 61180-1 EN 61180-1 Measurement of standby power Household electrical IEC 62301 appliances - Measurement of TS EN 62301 standby power EN 62301 Safety of power transformers, power supplies, reactors and similar products Household range hoods - Methods for measuring performance Safety of power transformers, power supplies, reactors and similar products -- Part 1: General requirements and tests IEC 61591 TS EN 61591 EN 61591 IEC 61558-1 TS EN 61558-1 EN 61558-1 Low-Voltage power supply devices Low-Voltage power supply devices, d.c. output performance characteristics and safety requirements IEC 61204 TS EN 61204 EN 61204 Uninterruptible Power Systems (UPS) Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts Uninterruptible Power Systems (UPS) - Part 1: General and safety requirements for UPS used in operator access areas Degrees of protection provided by enclosures for electrical equipment against external mechanical impacts (IK code) TS EN 62040-1 EN 62040-1 IEC 62040-1 TS EN 62262 EN 62262 IEC 62262 High Temperature Environmental engineering MIL-STD-810G Metot 501.5 considerations and laboratory tests -High Temperature Low Temperature Environmental engineering MIL-STD-810G Metot 502.5 considerations and laboratory tests - Low Temperature Ball pressure test Fire hazard testing - Part 10-2: TS EN 60695-10-2 Abnormal heat; Ball pressure EN 60695-10-2 test IEC 60695-10-2

Annex of the certificate (Page 7/18) Accreditation Nr: ELECTROMAGNETIC COMPABILITY LABORATORY (Information Technology Equipment) Industrial, scientific and medical (ISM) radio-frequency equipment. Equipments which rated current up to 16A Electrical and electronic equipment subjected to conducted directly and air static electricity discharges. Electrical and electronic equipment subjected to radio frequency electromagnetic field Electrical and electronic equipment subjected to repetitive electrical fasttransients Electrical and electronic equipment subjected to unidirectional surges caused by overvoltages from switching and lightning transients. Electrical and electronic equipment subjected to electromagnetic disturbances coming from intended radio-frequency (RF) transmitters Electrical and electronic equipment for household, commercial and industrial applications when subjected to magnetic fields at power frequency Terminal disturbance voltage (150kHz - 30MHz) Emission disturbance (30MHz - 3 GHz) Terminal disturbance voltage (150kHz - 30MHz) Emission disturbance (30MHz - 3 GHz) Harmoniks Voltage fluctuations and flicker (Short and long term) Electrostatic discharge immunity test (Conducted 2 kv - 8 kv, Air :2 kv - 15 kv) Radiated, radio-frequency, electromagnetic field immunity Electrical fast transient/burst immunity test Surge immunity test Immunity to conducted disturbances, induced by radio-frequency fields Power frequency magnetic field immunity test TS EN 55022/A1 EN 55022/A1 CISPR 22 TS 3327 EN 55011/A2 EN 55011/A1/A2 CISPR 11 TS EN 61000-3-2 EN 61000-3-2/A2 IEC 61000-3-2 TS EN 61000-3-3/A2 EN 61000-3-3 IEC 61000-3-3 TS EN 61000-4-2 EN 61000-4-2 IEC 61000-4-2 TS EN 61000-4-3/A1 EN 61000-4-3/A1 IEC 61000-4-3 Test Frequency:20 MHz-3GHz Field Level: up to 30 V/m TS EN 61000-4-4 EN 61000-4-4 IEC 61000-4-4 TS EN 61000-4-5 EN 61000-4-5 IEC 61000-4-5 TS EN 61000-4-6 EN 61000-4-6 IEC 61000-4-6 TS EN 61000-4-8 EN 61000-4-8/A1 IEC 61000-4-8

Annex of the certificate (Page 8/18) Accreditation Nr: Electrical and electronic equipment connected to low voltage power supply networks for voltage dips, short interruptions, and voltage variations Devices which contains electrical and electronic equipment under operational conditions and shows ring waves Residential, commercial and light-industrial environments devices Voltage dips, short interruptions and voltage variations immunity tests Ring wave immunity test (EMC) - Part 6-3: Generic standards. Emission standard for residential, commercial and light-industrial environments (EMC) - Part 6-3: Generic standards. Immunity for residential, commercial and light-industrial environments TS EN 61000-4-11 EN 61000-4-11 IEC 61000-4-11 TS EN 61000-4-12 EN 61000-4-12 IEC 61000-4-12 TS EN 61000-6-3 EN 61000-6-3 IEC 61000-6-3 TS EN 61000-6-1 EN 61000-6-1 IEC 61000-6-1 Industrial environments devices (EMC) - Part 6-4: Generic standards. Emission standard for industrial environments TS EN 61000-6-4 EN 61000-6-4 IEC 61000-6-4 (EMC) - Part 6-2: Generic standards - Immunity for industrial environments TS EN 61000-6-2 EN 61000-6-2 IEC 61000-6-2 Information technology equipment Information technology equipment. Immunity characteristics. Limits and methods of measurement TS EN 55024 EN 55024/A2 CISPR 24 Water Meters Measurement of water flow in fully charged closed conduits - Meters for cold potable water and hot water - Part 3: Test methods and equipment ISO 4064-3 (Article 9.4.1-9.4.2-9.5.3-9.5.4-9.5.5-9.5.6) Water meters. Test methods and equipment Electromagnetic immunity tests BS EN 14154-3/A1(Article 6.3.1-6.3.2-6.4.3-6.4.4-6.4.5-6.6)

Annex of the certificate (Page 9/18) Accreditation Nr: Natural Gas Meters Gas meters. Diaphragm gas meters Electromagnetic immunity and emission tests. TS 5910 EN 1359/T1 (Article C.5.1-C.5.2-C.5.4) EN 1359 Medical Electrical Equipments Medical electrical equipmentgeneral requirements for basic safety and essential performance. Collateral standard.. Requirements and tests TS EN 60601-1-2 EN 60601-1-2 IEC 60601-1-2 Devices (meters) which contain electricity measurement equipment Electricity metering equipment (AC). General requirements, tests and test conditions - Part: 11 - Metering equipment TS EN 62052-11 (Article 7.5) EN62052-11 IEC62052-11 Household appliances Electromagnetic compatibility. Requirements for household appliances, electric tools and similar apparatus immunity. Product family standard TS EN 55014-2 / IS1 EN 55014-2/A2 CISPR14-2. Requirements for household appliances, electric tools and similar apparatus. Emission tests. TS EN 55014-1 EN 55014-1/A1 CISPR 14-1 Electrical equipment for measurement, control and laboratory use. Electrical equipment for measurement, control and laboratory use. EMC requirements. General requirements. Electromagnetic immunity and emission. TS EN 61326/A3 TS EN 61326-1 EN 61326 EN 61326-1 IEC 61326

Annex of the certificate (Page 10/18) Accreditation Nr: Control equipments for lifts, escalators and moving walks. Electromagnetic compatibility. Product family standard for lifts, escalators and moving walks. Immunity tests. TS EN 12016/A1 EN 12016 (Only electrical/electronical apparatus and sub-parts contain). Product family standard for lifts, escalators and moving walks. Emission tests. TS EN 12015 EN 12015 (Only electrical/electronical apparatus and sub-parts contain) Shielded Enclosures Anechoic chambers. Part - 1: Shield attenuation measurement TS EN 50147-1 EN 50147-1 (Only between frequency 10 khz-3 GHz) Equipments which rated current up to 16 A. (EMC)Testing and measurement techniques. Harmonics and interharmonics including mains signalling at a.c. power port, low frequency immunity tests TS EN 61000-4-13 EN 61000-4-13/A1 (EMC)Testing and measurement techniques. Voltage fluctuation immunity test for equipment with input current not exceeding 16 A per phase TS EN 61000-4-14/A1 EN 61000-4-14/A2 (EMC)Testing and measurement techniques. Ripple on d.c. input power port immunity test. TS EN 61000-4-17/A1 EN 61000-4-17/A2 Arc welding equipment. Arc welding equipment. (EMC) requirements. Immunity and emission tests. TS EN 60974-10 EN 60974-10

Annex of the certificate (Page 11/18) Accreditation Nr: Low voltage power supplies Low voltage power supplies, d.c. output. Electromagnetic compatibility (EMC). Immunity and emission tests TS EN 61204-3 EN 61204-3 Road traffic signal systems.. TS EN 50293 Road traffic signal systems. EN 50293 Product standard Automatic Control Schemes Alarm Systems Automatic electrical controls for household and similar use. General requirements. Product family standard: Immunity requirements for components of fire, intruder and social alarm systems TS 7425 EN 60730-1/A16 EN 60730-1/A16 (Article 23-Emission and Article 26-Immunity) TS EN 50130-4/A2 EN 50130-4/A2 Electrical relays Electrical relays. Electromagnetic emission tests for measuring relays and protection equipment TS EN 60255-25 EN 60255-25 Electrical relays. requirements for measuring relays and protection equipment. Immunity tests. TS EN 60255-26 EN 60255-26 (Table 6.5 Excluding) Electricity metering equipment (a.c.) Part 1: General requirements, tests and test conditions. Electromagnetic immunity and emmision tests for metering equipment (class indexes A, B and C) TS EN 50470-1 EN 50470-1 (Article 7.4) Part 2: Particular requirements. Electromagnetic immunity and emmision tests for electromechanical meters for active energy (class indexes A and B) TS EN 50470-2 EN 50470-2 (Article 8.7.7.8 ; 8.7.7.9; 8.7.7.13; 8.7.7.14; 8.7.7.15)

Annex of the certificate (Page 12/18) Accreditation Nr: (Electricity metering equipment (a.c.), continued) Technical condition for radio equipment and services Special conditions for Short-Range Devices (SDR) operating on frequencies between 9 khz and 40 khz for radio equipment and services. Automative and Parts Part: 3 Particular requirements. Static meters for active energy (class indexes A, B and C) and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services.immunity and emission tests. and Radio spectrum Matters (ERM) - ElectroMagnetic Compatibility (EMC) standard for radio equipment and services. Immunity and emission tests. Electromagnetic immunity and emission tests for motor vehicles and parts. TS EN 50470-3 EN 50470-3 (Madde 8.7.7.10; 8.7.7.11; 8.7.7.12; 8.7.7.14; 8.7.7.15; 8.7.7.16) TS EN 301489-1 V1.8.1 ETSI 301489-1:V1.8.1 (Article8.2and8.7Excluding) TS EN 301489-3 V1.4.1 ETSI 301489-3: V1.4.1 (ETSI 301489-1 Standards Article 8.2 and 8.7 Excluding) 72/245/AT 72/245/EEC Construction machinery. of machines with internal electrical power supply. Immunity and emission tests TS EN 13309 EN 13309 Earth-moving machinery Earth-moving machinery - ISO 13766. Immunity and emission tests Dynamic measuring systems for liquids Dynamic measuring systems for liquids other than water Immunity Tests (Electrical disturbance tests) OIML R 117-1 (Article A.11) Dynamic measuring instruments. General requirements for OIML D 11 measuring instruments - (Article 12; 13) Environmental conditions Equipmet with rated current 16A up to 75A (EMC). Limits. Limitation of voltage changes, voltage fluctuations and flicker in public low-voltage supply systems. Equipment with rated voltage current 75 A and subject to conditional connection TS EN 61000-3-11 EN 61000-3-11 IEC 61000-3-11

Annex of the certificate (Page 13/18) Accreditation Nr: (Equipmet with rated current 16A up to 75A, continued) Road Vehicles (Impact 2a - 2b and 5b excluded) The immunity test of electrical and electronic equipment against damped oscillatory waves (EMC)Limits. Limits for harmonic currents produced by equipment connected to public low-voltage systems with input current 16 A and 75 A per phase Electrical disturbances from conducting and coupling. Part: 2 Electrical transient conduction along supply lines only. (EMC). Testing and measurement techniques. Damped oscillatory wave immunity test TS EN 61000-3-12 EN 61000-3-12 IEC 61000-3-12 ISO 7637-2 (Article 4.3. Voltage Transient Emission Test excluding) TS EN 61000-4-18 EN 61000-4-18 IEC 61000-4-18 Uninterruptible power systems (UPS) Electrical lighting and similar equipment (EMC) requirements Limits and methods of measurement of radio disturbance characteristics of electrical lighting and similar equipment TS EN 62040-2 EN 62040-2 IEC 62040-2 TS EN 55015/A1/A2 EN 55015/A1/A2 CISPR 15/A1/A2 Electrical lighting equipment Equipment for general lighting purposes. EMC immunity requirements TS EN 61547 EN 61547/A1 EN 61547 IEC 61547. Electrical apparatus for the detection and measurement of combustible gases, toxic gases or oxygen TS EN 50270 TS EN 61547 Electrical and electronic installations in ships Electrical and electronic installations in ships. IEC 60533

Annex of the certificate (Page 14/18) Accreditation Nr: Shielded Test Environments Standard Method for Measuring Effectiveness of Electromagnetic Shielded Enclousers IEEE STD 299 Military Equipments; Electrical / Electronical and Electromechanical Devices and Subsystems Rotating electrical machines Conducted Emission CE102 (10kHz - 10MHz) Radiated emission RE102 (10kHz - 3GHz) Radiated Emission RE101 (30Hz - 100kHz) Rotating electrical machines - Part 1: Rating and performance MIL STD461E MIL STD461E MIL STD461E MIL STD461F MIL STD461E MIL STD461F TS EN 60034-1 (Article 13 EMU terms) 2,4 GHz Broad band transmission system, 5 GHz high performance RLAN device and 5,8 GHz broad band for data transmission systems Electromagnetic compatibility and Radio spectrum Matters (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment; Part 17: Specific conditions for Broadband Data Transmission 2,4 GHz Broad band transmission system, 5 GHz high performance RLAN device and 5,8 GHz broad band special requirements for data transmission systems (up to 3 GHz) TS EN 301 489-17 V1.3.2 ETSI EN 301 489-17:V2.1.1 (Article 8.2 excepting)

Annex of the certificate (Page 15/18) Accreditation Nr: Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mw; WATER METER LABORATORY Water Meter Electromagnetic compatibility and Radio spectrum Matters (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1 000 MHz frequency range with power levels ranging up to 500 mw; Part 1: Technical characteristics and test methods Pressure Loss Test ETSI EN 300 220-1 V1.3.1 TS10021Article4 ISO4064-3Article7 Water Meter Directive 75/33/ATArticle3.4 TS EN14154-3+A2Article5.11 Static Pressure Test Error( of Indication ) Test Endurance Test TS10021Article3 ISO4064-3Article6 75/33/AT Article3.3 TS EN14154-3+A2Article5.2 TS10021 Article 2 ISO 4064-3 Article 5 cold-water meters Directive 75/33/AT Article 5 TS EN14154-3+A2 Article5.4 TS10021 Article 5 ISO4064-3 Article 8 75/33/AT Article 5 TS EN14154-3+A2 Article 5.13 Reverse Flow Test Absence of Flow Test Water Temperature Test (T50) ISO4064-3Article5.11 TS EN14154-3+A2Article5.12 EN 14154-3+A2Article5.5 TS EN14154-3+A2Article6.4

Annex of the certificate (Page 16/18) Accreditation Nr: (WATER METER LABORATORY Water Meter, continued) GAS METER LABORATORY Natural Gas Meter GAS BURNING DEVICES LABORATORY Cooking Devices (Burning Gas) Water Pressure Test Verification of Flow Profile Sensitivity Classes Cold Test Dry Heat Test Damp Heat Cyclic Test Overload Water Temperature Test Resistance to internal Pressure Meter Case Sealing Connections Resistance to impact Ultraviolet Exposure Test -Domestic cooking appliances burning gas Safety- General Domestic cooking appliances burning gas- Safety- Appliances having one or more burners with an automatic burner Domestic cooking appliances burning gas-rational use of energy. General ISO4064-3Article5.10 TS EN14154-3+A2Article5.8 TS EN14154-3+A2Article5.9 ISO4064-3Article5.12 TS EN14154-3+A2Article6.2.2 ISO4064-3Article9.3.12 TS EN14154-3+A2Article6.2.1 ISO4064-3Article9.3.1 TS EN 14154-3+A2 (Article 6.2.3) ISO4064-3 (Article 9.3.3) TS EN14154-3+A2Article5.7 TS 5910EN1359/T1 TS 5910EN1359 EN1359/A1(E) Article6.2.3 TS 5910EN1359/T1 TS 5910EN1359 EN1359/A1(E) Article6.2.4 TS 5910EN1359/T1 TS 5910EN1359 EN1359/A1(E) Article6.2.5 TS 5910EN1359/T1 TS 5910EN1359 EN1359/A1(E) Article6.2.7 TS 5910EN1359/T1 TS 5910EN1359 EN1359/A1(E) Article8.3.2 TS 616-1-1EN30-1-1 TS EN30-1-1/AC TS 616-1-1EN30-1-1/A2 TS 616-1-1EN30-1-1/A2/AC TS 616-1-1EN30-1-1 TS EN30-1-4 TS EN30-1-4/A1 TS 616-2-1EN30-2-1 TS 616-2-1EN30-2-1/A2 TS 616-2-1EN30-2-1/A1

Annex of the certificate (Page 17/18) Accreditation Nr: (GAS BURNING DEVICES LABORATORY Cooking Devices (Burning Gas), continued) Barbecues ( Burning Gas) LPG Devices Heaters (Gas Burning Flueless) Industrial Type Cooking Appliances Kitchen Devices (Open Burners and Wok Burners) Kitchen Devices (Ovens) Domestic cooking appliances burning gas-rational use of energy. General Domestic cooking appliances burning gas. SafetyAppliances having forced-convection ovens and/or grills Domestic cooking appliances burning gas. Rational use of energyappliances having forced-convection ovens and/or grills Specification for dedicated liquefied petroleum gas appliances. Barbecues for outdoor use contact grills included Specification for dedicated LPG appliances. Room sealed LPG space heating equipment for installation in vehicles and boats (Except Article6.23,6.12.3.10,6.12.3.11) Specification for dedicated liquefied petroluem gas appliances. Flueless non-domestic space heaters not exceeding 10 kw (except Article6.13.3,6.23.3) Gas heated catering equipment- General safety Rules (Except Article 7.4.3.3, 7.4.3.4, 7.6.3) Gas heated catering equipment- Specific requirements - Open Burners and Wok Burners (Article 7.4.3.3) Gas heated catering equipment- Specific requirements - Ovens TS EN30-2-1/A1/AC TS 616-1-2EN30-1-2 TS 616-2-2EN30-2-2 TS EN498 EN 498 TS EN624 EN 624 TS EN461 TS EN461/A1 TS EN203-1+A1 EN 203-1+A1 TS EN203-2-1 EN 203-2-1 TS EN203-2-2 EN 203-2-2

Annex of the certificate (Page 18/18) Accreditation Nr: Kitchen Devices (Boiling Pans) Kitchen Devices (Fryers) Kitchen Devices (Hot Water Heaters) Laundry Machines Dryers Gas heated catering equipment- Specific requirements - Boiling Pans Gas heated catering equipment - Specific requirements - Fryers Gas heated catering equipment- Specific requirements -Hot water Heaters for beverage Domestic gas-fired washing machines, of nominal heat input not exceeding 20 kw- Part 1: Safety (Except Article6.18,6.15.3.2,6.20.2.4) Gas-fired type B tumble dryers of nominal heat input not exceeding 20 kw (Except Article6.12.3.2.2, 6.15.4.2) End of Scope TS EN203-2-3 EN 203-2-3 TS EN203-2-4 EN 203-2-4 TS EN203-2-6 EN 203-2-6 TS EN12244-1 EN12244-1 TS EN12752-1 EN12752-1 Dr. H. İbrahim ÇETİN Deputy Secretary General