AKKREDITOITU TESTAUSLABORATORIO ACCREDITED TESTING LABORATORY MICROSOFT MOBILE OY TCC MICROSOFT

Transcription

1 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 1(20) AKKREDITOITU TESTAUSLABORATORIO ACCREDITED TESTING LABORATORY MICROSOFT MOBILE OY TCC MICROSOFT Tunnus Code Laboratorio Laboratory Osoite Address www www T117 Tampereen laboratorio PL TAMPERE (Visiokatu 4, Tampere) Tampere Laboratory P.O.Box 403 FI TAMPERE FINLAND (Visiokatu 4, Tampere) Espoon laboratorio PL Microsoft Mobile FINLAND (Karakaari 3, Espoo) Espoo Laboratory P.O.Box 505 FI Microsoft Mobile FINLAND (Karakaari 3, Espoo)

2 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 2(20) Testausalat Fields of testing Materiaali- ja tuotetestaus Material and product testing Kaikissa toimipisteissä ei suoriteta kaikkia testauksia All testing services are not available at every site

3 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 3(20) Materiaali- ja tuotetestaus, EMC/RF-testaus Material and product testing, EMC/RF testing GSM, WCDMA & LTE systeemitestaus GSM, WCDMA & LTE system testing Cellular mobile phones Narrow band (3,1 khz) speech and video telephony terminal acoustic test specification UICC-terminal interface; Universal Subscriber Identity Module (USIM) application test specification Mobile Equipment (ME) conformance test specification; Universal Subsriber Interface Module Application Toolkit (USAT) conformance test specification 3rd Generation Partnership Project; Technical Specification Group Terminals; Terminal Conformance Specification; Radio transmission and reception (FDD) (Release 1999) User Equipment (UE) conformance specification; Part 1: Protocol conformance specification Part 2: Protocol Implementation Conformance Statement (PICS) proforma specification Performance requirements testing for A-GPS (Terminal conformance specification; Assisted Global Positioning System (A-GPS); Frequency Division Duplex (FDD)) Terminal conformance specification; Assisted Global Navigation Satellite Systems (A- GNSS); Frequency Division Duplex (FDD) 3GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS

4 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 4(20) Internet Protocol (IP) multimedia call control protocol based on Session Initiation Protocol (SIP) and Session Description Protocol (SDP); User Equipment (UE) conformance specification; Part 1: Protocol conformance specification; Part 2: Implementation Conformance Statement (ICS) specification; Part 3: Abstract Test Suites (ATS)". Evolved Universal Terrestrial Radio Access (E-UTRA); User Equipment (UE) conformance specification; Radio transmission and reception; Part 1: Conformance testing; Part 2: Implementation Conformance Statement (ICS); Part 3: Radio Resource Management (RRM) conformance testing. Evolved Universal Terrestrial Radio Access (E-UTRA) and Evolved Packet Core (EPC); User Equipment (UE) conformance specification; Part 1: Protocol conformance specification; Part 2: Implementation Conformance Statement (ICS) proforma specification; Part 3: Test suites. Universal Terrestrial Radio Access (UTRA) and Evolved UTRA (E-UTRA) and Evolved Packet Core (EPC); User Equipment (UE) conformance specification for UE positioning 3GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS GPP TS

5 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 5(20) User Equipment (UE) application layer data throughput performance Conformance testing of GSM Terminals. (Methods and tests.) GSM frequency bands included: GSM850, GSM900, GSM1800 and GSM1900 Conformance testing of GSM Terminals (SATK). (Methods and tests.) GSM frequency bands included: GSM850, GSM900, GSM1800 and GSM1900 Conformance testing of GSM900 and GSM 1800 Terminals according to RTTE requirements. (ERM); Base Stations (BS) and User Equipment (UE) for IMT Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive; Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive IMT cellular networks; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive; Part 13: Evolved Universal Terrestrial Radio Access (E- UTRA) User Equipment (UE) Smart Cards; UICC-Terminal interface; Physical, electrical and logical test specification (Release 5) 3GPP TR GPP TS GPP TS GPP TS GPP TS GPP TS EN (GSM 13.01), EN (GSM 13.34), EN EN EN EN ETSI: TS

6 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 6(20) Sovellusten SW testaus Application SW testing Cellular mobile phones Smart Cards; UICC-Terminal interface; Card Application Toolkit Conformance Test Specification Conformance testing of GSM900, GSM1800 and GSM1900 Terminals according to GCF requirements. Conformance testing of GSM850 and GSM 1900 Terminals according to PTCRB requirements. Mobile Communications Application Testing of A-GPS Secure User Plane technology Mobile Communications Application Testing of A-GPS Secure User Plane technology Open Mobile Alliance; Smartcard Web Server Enabler Architecture PTCRB TTY (Text Telephony) Test Specifications PTCRB AT-Command Test Specification Mobile Communications Application Testing Mobile Communications Application Testing ETSI: TS GLOBAL CERTIFICATION FORUM, Certification Criteria GCF-CC NAPRD.03 OMA-ETS-SUPL-V1-0 OMA-ETS-SUPL-V2-0 OMA-ETS- Smartcard_Web_Server-V1_1 PTCRB Bearer-Agnostic TTY Test Specification; 2G TTY (Text Telephony) RFT; 3G TTY (Text Telephony) RFT 062. PTCRB AT-Command Test Specification; AT-Command Test Specification Covering PTCRB RFT 77 3G TTY (Text Telephony) RFT 062. OMA-ETS-MMS OMA-ETS-DMV1-2

7 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 7(20) EMC-testaus & säteilevä systeemitestaus EMC testing & radiated system testing Cellular mobile phones and accessories. Computers and terminal equipment. Bluetooth devices, Radio equipment and WLAN devices, separate, or integrated in mobile phones or accessories Mobile Communications Application Testing Conformance testing of GSM Terminals. (Methods and tests.) GSM frequency bands included: GSM850, GSM900, GSM1800 and GSM > Spurious emissions FCC Codes of Federal Regulations CFR 47 FCC Codes of Federal Regulations CFR 47 FCC Codes of Federal Regulations CFR 47 FCC Codes of Federal Regulations CFR 47 FCC Codes of Federal Regulations CFR 47 FCC Codes of Federal Regulations CFR 47 Methods of Measurement of Radio-Noise Emissions from Low-Voltage Electrical and Electronic Equipment in the Range of 9 khz to 40 GHz American National Standard of Procedures for Compliance Testing of Unlicensed Wireless Devices. Limited to: Bluetooth, Bluetooth Low Energy, 2.4 / 5 GHz WLAN and NFC transmitters. IMTC 3G-324M Video Telephony 3GPP TS chapter 12.2 CFR 47 Part 15 CFR 47 Part 18 CFR 47 Part 22 CFR 47 Part 24 CFR 47 Part 27 CFR 47 Part 90 ANSI C63.4 ANSI C63.10

8 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 8(20) Land mobile FM or PM - Communications equipment - Measurement and performance standards. Limited to: Carrier frequency stability Unwanted emissions, radiated spurious Radiated power output General Requirements and Information for the Certification of Radiocommunication Equipment RSS-130 Mobile Broadband Services (MBS) Equipment Operating in the Frequency Bands MHz and MHz Radio Standards Specifications 800 MHz Cellular Telephones Employing New Technologies Radio Standards Specification 2 GHz Personal Communications Services Advanced Wireless Services Equipment Operating in the Bands MHz and MHz Wireless Communication Service (WCS) Equipment Operating in the Bands MHz and MHz RSS-199 Broadband Radio Service (BRS) Equipment Operating in the Band MHz Radio Standards Specification Low Power Licence-Exempt Radiocommunication Devices (All Frequency Bands) Wireless Power Transfer Devices (Wireless Chargers) TIA-603 RSS-Gen RSS-130 RSS-132 RSS-133 RSS-139 RSS-195 RSS-199 RSS-210 RSS-216

9 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 9(20) Interference-Causing Equipment Standard Digital Apparatus Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity radiated disturbance measurements. Part 4-2: Uncertainties, statics and limit modelling Uncertainty in EMC measurements. Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement Information technology equipment - Radio disturbance characteristics - Limits and methods of measurement (ERM); Short Range Devices (SRD); Radio equipment to be used in the 25 MHz to 1000 MHz frequency range with power levels ranging up to 500 mw; Part 1: Technical characteristics and test methods; Limitations: Test frequency limited to 26,5 GHz ICES-003 CISPR CISPR CISPR 22 CISPR 24 EN

10 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 10(20) (ERM); Wideband Transmission systems; data transmission equipment operating in the 2,4 GHz ISM band and using spread spectrum modulation techniques; Part 1: Technical characteristics and test conditions; Part 2: Harmonized EN covering essential requirements under article 3.2 of the R&TTE Directive (ERM); Short Range Devices (SRD); Radio equipment in the frequency range 9 khz to 25 MHz and inductive loop systems in the frequency range 9 khz to 30 MHz; Part 1: Technical characteristics and test conditions; Part 2: Harmonized EN under article 3.2 of the R&TTE Directive Limitations: Test frequency limited to 26,5 GHz. (ERM); Short Range Devices (SRD); Radio equipment to be used in the 1 GHz to 40 GHz frequency range; Part 1: Technical characteristics and test methods NOTE: Upper measured frequency is limited to 40GHz EN EN EN

11 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 11(20) (ERM); Cordless audio devices in the range 25 MHz to 2000 MHz; Part 1: Technical characteristics and test methods (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 1: Common technical requirements. (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 3: Specific conditions for Short-Range Devices (SRD) operating on frequencies between 9 khz and 40 GHz. (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 7: Specific conditions for mobile and portable radio and ancillary equipment of digital cellular radio telecommunications systems (GSM and DCS). EN EN EN EN

12 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 12(20) (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 9: Specific conditions for wireless microphones, similar Radio Frequency (RF) audio link equipment, cordless audio and in-ear monitoring devices (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 17: Specific requirements for Wideband data and HIPERLAN. (ERM); ElectroMagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA Direct Spread (UTRA) for Mobile and portable (UE) radio and ancillary equipment Radiated Spurious Emission measurement Broadband Radio Access Networks (BRAN); 5 GHz high performance RLAN; Harmonized EN covering the essential requirements of article 3.2 of the R&TTE Directive EN EN EN EN (clauses and ) EN

13 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 13(20) (ERM); Base Stations (BS) and User Equipment (UE) for IMT Third-Generation cellular networks; Part 1: Harmonized EN for IMT-2000, introduction and common requirements, covering essential requirements of article 3.2 of the R&TTE Directive Part 2: Harmonized EN for IMT-2000, CDMA Direct Spread (UTRA FDD) (UE) covering essential requirements of article 3.2 of the R&TTE Directive (ERM); Short Range Devices (SRD); Close Range Inductive Data Communication equipment operating at 13,56 MHz; Part 1: Technical characteristics and test methods Part 2: Harmonized EN under article 3.2 of the R&TTE Directive Limits and methods of measurement of radio disturbance characteristics of broadcast receivers and associated equipment. Limitations: Test frequency limited to 18 GHz Specification for radio disturbance and immunity measuring apparatus and methods - Part 2-3: Methods of measurement of disturbances and immunity - Radiated disturbance measurements Part 4-2: Uncertainties, statics and limit modelling Uncertainty in EMC measurements. EN EN EN /2 EN EN EN

14 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 14(20) Electromagnetic immunity of broadcast receivers and associated equipment. Limits and methods of measurement of radio disturbance characteristics of information technology equipment Electromagnetic Compatibility (EMC) Part 4: Testing and measurements techniques Section 2: Electrostatic discharge immunity test. Basic EMC publication. Information technology equipment - Immunity characteristics - Limits and methods of measurement Electromagnetic Compatibility (EMC) Part 4: Testing and measurements techniques Section 3: Radiated, radiofrequency, electromagnetic field immunity test. Electromagnetic Compatibility (EMC) Part 4: Testing and measurements techniques Section 4: Electrical fast transient/burst immunity test. Basic EMC publication. Electromagnetic Compatibility (EMC) Part 4: Testing and measurements techniques Section 5: Surge immunity test. EN EN EN EN EN EN EN

15 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 15(20) Electromagnetic Compatibility (EMC) Part 4: Testing and measurements techniques Section 6: Immunity to conducted, disturbances induced by radio-frequency fields. Electromagnetic Compatibility (EMC) Part 4-8: Testing and measurement techniques Power frequency magnetic field immunity test. Electromagnetic Compatibility (EMC); Part 4: Testing and measurements techniques; Section 11: Voltage dips, short interruptions and voltage variations immunity tests. Road vehicles Electrical disturbance by conduction and coupling; Part 1: Passenger cars and light commercial vehicles with nominal 12 V supply voltage Electrical transient conduction along supply lines only Road vehicles Electrical disturbance by conduction and coupling; Part 2: Commercial vehicles with nominal 24 V supply voltage - Electrical transient conduction along supply lines only Road vehicles - Electrical disturbance by conduction and coupling - Part 3: Vehicles with nominal 12 V or 24 V supply voltage - Electrical transient transmission by capacitive and inductive coupling via lines other than supply lines. EN EN EN ISO ISO ISO

16 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 16(20) SAR-testaus SAR-testing Cellular mobile phones and accessories Conformance testing of GSM850 and GSM 1900 Terminals according to PTCRB requirements. -> Spurious emissions. IEEE Standard for Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications IEEE Standard for Information technology Telecommunications and information exchange between systems Local and metropolitan area networks Specific requirements Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications Amendment 5: Enhancements for higher throughput Limits and Measurement Methods of Electromagnetic Compatibility for 900/1800MHz Digital Cellular Telecommunications System; Part 1: Mobile Station and Ancillary Equipment IEEE Standard for Safety Levels with Respect to Human Exposure to Radio Frequency Electromagnetic Fields, 3 khz to 300 GHz NAPRD.03 3GPP TS , Test Case and WLAN IEEE WLAN IEEE GB/T ANSI/IEEE C95.1

17 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 17(20) IEEE Recommended Practice for the Measurement of Potentially Hazardous Electromagnetic Fields-RF and Microwave Specific Absorption Rate (SAR) Estimation for Cellular Phone. Radiocommunications (Electromagnetic Radiation - Human Exposure) Standard 2003 (Australia) Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz) Product standard to demonstrate compliance of Radio frequency fields from hand-held and body-mounted wireless communication devices used by the general public (30 MHz - 6 GHz) Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz-300 GHz) General public Assesment of the compliance of low-power electronic and electrical equipment with the basic restrictions related to human exposure to electromagnetic fields (10 MHz to 300 GHz) Sec Radiofrequency radiation exposure evaluation: portable devices. ANSI/IEEE C95.3 (2002) ARIB STD-T56 Australian Communications and Authority (ACMA) EN EN EN IEC/EN CFR

18 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 18(20) Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 1: Procedure to determine the specific absorption rate (SAR) for hand-held devices used in close proximity to the ear (frequency range of 300 MHz to 3 GHz) Human exposure to radio frequency fields from hand-held and body-mounted wireless communication devices - Human models, instrumentation, and procedures - Part 2: Procedure to determine the specific absorption rate (SAR) for wireless communication devices used in close proximity to the human body (frequency range of 30 MHz to 6 GHz) Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz GHz) Assessment of electronic and electrical equipment related to human exposure restrictions for electromagnetic fields (0 Hz GHz) (IEC 62311:2007, modified) Guidelines for Limiting Exposure to Time-Varying Electric, Magnetic, and electromagnetic Fields (up to 300 GHz) EU Council Recommendation of 12 July 1999 in the limitation of exposure of the general public to electromagnetic fields (0 Hz to 300 GHz) EN IEC YD/T IEC IEC EN ICNIRP 1999/519/EC

19 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 19(20) HAC-testaus HAC-testing Cellular mobile phones Akkutestaus Battery testing Rechargeable Batteries for Cellular Telephones ErP (Electrical Power consumption in "stand by" mode) NFC systeemitestaus NFC system testing RFID feature testing NFC testing Recommended Practice for Determining the Peak Spatial- Average Specific Absorption Rate (SAR) in the Human Head from Wireless Communications Devices: Measurement Techniques Evaluation Procedure for Mobile and Portable Radio Transmitters with respect to Health Canada s Safety Code 6 for Exposure of Humans to Radio Frequency Fields American National Standard for Methods of Measurement of Compatibility between Wireless Communication Devices and Hearing Aids; Radio Frequency Emission CTIA Test Plan for Hearing Aid Compatibility (HAC) CTIA Certification Requirements for Battery System Compliance to IEEE 1725 Test methods are defined in EN document. This standard specifies methods of measurement of electrical power consumption in standby mode(s) and other low power modes (off mode), as applicable. Conformance testing of the ISO 7816, SWP/HCI and IC-USB interface testing. IEEE 1528 RSS-102 ANSI C63.19 CTIA Test Plan for Hearing Aid Compatibility IEEE Standard for Rechargeable Batteries for Cellular Telephones IEEE Std 1725 EN ETSI: TS and

20 T117/M51/2016 Liite 1 / Appendix 1 Sivu / Page 20(20) Cellular Mobile Phones UICC-terminal interface; Universal Subscriber Identity Module (NFC) services test specification GSMA TS.27