Main Catalog. Terminal blocks Insulation displacement ADO System

Main Catalog Terminal blocks displacement System

Summary Presentation... - Selection guide... - - clamp connection... - 8 Feed through terminal blocks... Feed through terminal blocks - Double-deck... - Terminal blocks for neutral circuits... Ground terminal blocks not electrically connected to the mounting rail... 8 Ground terminal blocks electrically connected to the mounting rail... 9 Heavy duty switch terminal blocks with blade...0 - Heavy duty switch terminal blocks with plug... - Heavy duty switch terminal blocks with fuse holder plug for automotive Mini Fuse... Fuse holder terminal blocks for x0 mm (.9x.8 in.) and x mm (.9x.98 in.) fuses... - 0 Neutral switch blocks... - Terminal blocks with safety connection... Miniblocks... Feed through miniblocks on DIN rail... - Ground miniblocks not electrically connected to the DIN mounting rail... Ground miniblocks electrically connected to the DIN mounting rail... 8 Feed through miniblocks on DIN rail...9-0 Ground miniblocks not electrically connected to the DIN mounting rail... Ground miniblocks electrically connected to the DIN mounting rail... Feed through miniblocks base mounted with flanges... - Ground miniblocks not electrically connected to the mounting plate... Feed through miniblocks base mounted with snap in mounting foot... - Ground miniblocks not electrically connected to the mounting plate... 8 - connection...9-9 Feed through terminal blocks...9 - Feed through terminal blocks - Double-deck... - 9 Terminal blocks for sensors / actuators...0 - Terminal blocks for neutral circuits... Terminal blocks for neutral conductors... Ground terminal blocks not electrically connected to the mounting rail... Ground terminal blocks electrically connected to the mounting rail... Heavy duty switch terminal blocks with blade... - 9 Heavy duty switch terminal blocks with plug...0 - Heavy duty switch terminal blocks with fuse holder plug for automotive Mini Fuse... Fuse holder terminal blocks for x0 mm (.9x.8 in.) and x mm (.9x.98 in.) fuses... - Neutral switch block... - Component holder terminal blocks... 8 Miniblocks... 9 Feed through miniblocks on DIN rail...80-8 Ground miniblocks not electrically connected to the DIN mounting rail... 8 Ground miniblocks electrically connected to the DIN mounting rail... 8 Feed through miniblocks on DIN rail...8-8 Ground miniblocks not electrically connected to the DIN mounting rail... 8 Ground miniblocks electrically connected to the DIN mounting rail... 8 Feed through miniblocks base mounted with flanges...88-89 Ground miniblocks not electrically connected to the mounting plate... 90 Feed through miniblocks base mounted with snap in mounting foot...9-9 Ground miniblocks not electrically connected to the mounting plate... 9 - Pluggable terminal blocks...9-99 Terminal blocks...9-9 Female plugs...9-98 Male plugs...99-00 - terminal blocks for railway applications...0-0 - Pluggable terminal blocks for railway applications...08 - Terminal blocks...08 - Female plugs... - Male plugs... - Tools, test connectors, accessories... - 8 Marking...9 - Alphanumeric... Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement - clamp DIN D,/.. Spacing mm +0,0.98"." Color Part number D,/.. 099. side side 0. - mm² 0. -, mm² - 8 AWG - AWG.0" 8,.9".9" D,/. with partition 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. 0,- mm² - AWG 0,-,mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 000 V 8 kv 00 V, A A mm² 8 AWG Wire stripping ecommended ecommended length (screw) (screw) torque (screw) Protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA Notes Standard block mm spacing. For multiple wires connection, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part number 8 0 End section grey blue yellow Test socket Test device Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer 8 less jumper bar orange IP0 9 Jumper bar 0 less jumper bar to be inserted into jaw orange IP0 Comb-type jumper bar Isolating cover Shield connector Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit 8 Test connector FEDAD th. mm FEDAD th. mm FEDAD th. mm AL DIA. mm DCB FC blue DIA. mm BJM () A BJM () A BJM () A BJM () A BJM () A 0 BJMI () A BJMI () A BJMI () A BJMI () A BJMI () A 0 BJS () A 0 EV () BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE.8 () 0 A 8 BJE.9 () 0 A 9 BJE.0 () 0 A 0 BJB BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC 0 A PC 0 A 0 EIP CBM th. 0, mm CBM8 th. 0,8 mm D CE. CEE 099.0 099 8.0 099 9.0 0 0. 00 08. 000 8. 0.0 0.0 0.0 0.0 0.0 0 8. 0 9. 0 80.0 0 8. 0 8. 0.0 08 9. 099. 099 8.0 099 98.0 099 99.0 099 8.0 099 8.0 099 8.0 099 8.0 099. 099. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 0.0 0. 0 0. 08. 08. 00 8.0 099. 099. See section on markers marking method C C0 TM () Use of these accessories requires the user to cut out the partition. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Presentation System is a composition of two complementary pieces : The IDC Connection : System : high speed and cost savings 80 % time saving... The tool : Cut the wire Insert Actuate the tool The System takes the electrical connection into a new era : Simple multi-function tool for reliable and long-term connections without effort. - Connection : seconds away High productivity benefits by eliminating unnecessary actions eliable, fast, vibration- and corrosion-proof Elimination of conductor preparation risks No need of ferrule By using System, the following risks no longer exist: Stripping operation overlooked All strands not connected Stripping length too long or too short Tightening torque not respected not respected Worn or poorly adapted crimping tools Ferrules poorly crimped System is the only wiring concept where connection is independent from operator - The tool is locked on the block during the entire connection process - The tool guarantees a simple, good and secure connection - The tool ensures reproduction of connection quality, connection after connection, without operator fatigue Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Presentation System is the best solution for applications with vibration, compared to other connection technologies System offers exceptional vibration and shock withstand performance with its double gripping of non-stripped conductors. esults : No loosening of screws No contact bounce - No cut cable strands System : high speed and cost savings With the strong System consecutive improvement and advantages in hand, we can take the next steps to bring to our customers the level of sustainable performance required. Provide added value to your customers, helping them to reduce costs, to improve efficiency and to restore some processes. Unstripped insulator absorbs vibrations Wire insulation is pinched by terminal block insulation Contact forces are permanently balanced Copper alloy jaw pinches the wire at two points System is the best solution for applications with corrosion, compared to other connection technologies Low galvanic couple of copper alloy jaw Sealed contact point End of wire (non isolated) is far from contact points System : The XXI st century connection Eliminates unnecessary actions Time reduction 00% secured connection Vibration-proof specialist Anti-corrosion specialist Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Selection guide SCEW CLAMP - FEED THOUGH NEUTAL CICUIT GOUND DOUBLE DECK Page to Page Page 8-9 Page to IDC TEMINAL BLOCKS wire size : 0. to 0 mm² ( to 8 AWG) Spacing : to 8 mm (.98" to.") wire size : 0. to 0 mm² ( to 8 AWG) Spacing : to 8 mm (.98" to.") :. to A :. to A wire size : 0. to 0 mm² ( to 8 AWG) wire size : 0. to 0 mm² ( to 0 AWG) Spacing : to 8 mm (.98" to.") Spacing : to 8 mm (.8" to.") : 0 to 80 A/s :. to A (80 A/ s. for ground block) - Page 9 to Page - Page - Page - 9 IDC TEMINAL BLOCKS Page 0 - wire size : 0. to mm² ( to AWG) wire size : 0. to mm² ( to AWG) Page 0 wire size : 0.8 to. mm² ( to AWG) wire size : 0. to. mm² ( to AWG) Spacing : to 8 mm (.98" to.") :. to A body material : UL 9 V0 Beige body material : UL 9 V0 - IF for railway applications Spacing : to 8 mm (.98" to.") :. to A Spacing : to 8 mm (.98" to.") : 0 to 80 A/s Spacing : mm (.8") :. to 8 A body material : UL 9 V0 Beige body material : UL 9 V0 - IF for railway applications - PLUGGABLE IDC TEMINAL BLOCKS + PLUGS Beige body material : UL 9 V0 - IF for railway applications wire size : 0. to. mm² Spacing :. mm (.00") : to A body material : UL 9 V0 Page 0 to Page 9 to 00 Beige body material : UL 9 V0 - IF for railway applications wire size : 0.9 to. mm² Spacing :. mm (.00") : A body material : UL 9 V0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Selection guide SENSO/ ACTUATO HEAVY DUTY SWITCH Page 0 to FUSE HOLDE Page to MINIBLOCKS Page SAFETY Page to 8 wire size : 0. to 0 mm² (0 to 0 AWG) Spacing : 8 mm (.") : A wire size : 0. to mm² ( to 0 AWG) Spacing : to 8 mm (.98" to.") : 0 to A wire size : 0. to mm² ( to 0 AWG) Spacing : to 8 mm (.98 to.") : to 0 A wire size : 0. to mm² ( to 0 AWG) Spacing : to 8 mm (.98" to.") :. to A (up to 00 A/ s. for ground blocks) Page 0 to Page to Page 9 to 9 wire size : 0. to mm² Spacing : mm (.98") Page 0 Page to :. A Page Pneumatic tool TOOLS wire size : 0. to, mm² ( to AWG) Spacing : to 8 mm (.98" to.") : 0 to A body material : UL 9 V0 Beige body material : UL 9 V0 - IF for railway applications TEST CONNECTOS wire size : 0. to. mm² ( to AWG) Spacing : to 8 mm (.98" to.") :. to 0 A ACCESSOIES Mounting rails P.Z Page 8 End stops wire size : 0. to mm² ( to AWG) Spacing : to 8 mm (.98" to.") :. to A Shield terminals for collector bar MAKING Page 9 to Extraction tool P0 P.G BADL BADH Vertical marking Horizontal marking Semi-automatic tool Simplified tool Page P P.Z P BAMH BAM Marking table Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement - clamp DIN side side 0, - mm² 0, -, mm² - 8 AWG - AWG D,/. Spacing mm +0,0.98".".9".0" 8,.9" Color Part number Standard block D,/. 099. Orange D,/. 099. Blue D,/.N. 099. Black D,/. 099. ed D,/. 099 8.0 Ivory D,/. 099 9.00 Yellow D,/. 099 0.0 Green D,/. 099. Standard mmblock 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 000 V 8 kv 00 V, A A mm² 8 AWG Wire stripping ecommended ecommended length (screw) (screw) torque (screw) Protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA Notes Standard block mm spacing. For multiple wires connections, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part number 9 8 8 End section grey blue yellow Circuit separator grey Test socket Test device Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) 8 Jumper bar not assembled Post + screw + washer 0 Jumper bar less jumper bar to be inserted into jaw orange IP0 Comb-type jumper label Isolating cover Shield connector Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit 8 Extraction tool kit 9 Test connector FEDAD th. mm FEDAD th. mm FEDAD th. mm SCAD AL () DIA. mm DCB FC blue DIA. mm BJM () A BJM () A BJM () A BJM () A BJM () A 0 BJMI () A BJMI () A BJMI () A BJMI () A BJMI () A 0 BJS () A 0 EV BJE. 0 A BJE. 0 A BJE. 0 A BJE. 0 A BJE. 0 A BJE. 0 A BJE.8 0 A 8 BJE.9 0 A 9 BJE.0 0 A 0 BJB BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC 0 A PC 0 A 0 EIP CBM th. 0, mm CBM8 th. 0,8 mm D CE. CEE 099.0 099 8.0 099 9.0 099.0 0 0. 00 08. 000 8. 0.0 0.0 0.0 0.0 0.0 0 8. 0 9. 0 80.0 0 8. 0 8. 0.0 08 9. 099. 099 8.0 099 98.0 099 99.0 099 8.0 099 8.0 099 8.0 099 8.0 099. 099. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 0.0 0. 0 0. 08. 08. 09.0 08 9.0 00 0. 00 8.0 00.00 099. 099. See section on markers marking method C C 0 TM () SC and 00 V () rated voltage are required with these accessories. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement - clamp DIN side side 0, -, mm² 0, - mm² - AWG - 0 AWG Spacing mm +0,0.8" D /.... Color Part number Standard block Orange D /. 099 0. Blue D /.N. 099 0. Black D /. 099 0. ed D /. 099 09.00 Ivory D /. 099 00.0 Yellow D /. 099 09. Green D /. 099 00.0 099 0. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Notes UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 000 V 00 V 00 V 8 kv, A 8 A 8 A, mm² 0/ AWG 0/ AWG Standard block mm. For multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part numbers 8 9 0 8 End section grey blue yellow Separator grey Test socket Test device Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) 8 Jumper bar not assembled Post + screw + washer 9 less jumper bar orange IP0 0 Jumper bar less jumper bar to be inserted into jaw orange IP0 Pivoting jumper bar Jumper bar for alternated jumping Universal jumper bar Connector plate Comb type jumper bar Insulating tip Shield connector 8 Protection label for protection label 9 IDC jumper 0 Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit Test connector FEDAD FEDAD FEDAD th. mm th. mm th. mm SCAD AL AL DCJ FC FC () () DIA. mm DIA. mm yellow DIA. mm DIA. mm BJM BJM BJM BJM BJM BJMI BJMI BJMI BJMI BJMI BJS EV A A A A A A A A A A A 0 0 0 BJE. BJE. BJE. BJE. BJE. BJE. BJE.8 BJE.9 BJE.0 BJB A A A A A A A A A 8 9 0 BJ. BJ. BJ. BJ. BJ.0 BJ.0 BJP, A, A, A, A, A, A A 0 0 BJA A 0 BJDP BJDP BJDP EL () () () 0 A spa. <-> spa. 0 A spa. <-> spa. 0 A spa. <-> spa. 8 or 0 A PC PC PC PC EIP A A A A 0 CBM CBM8 EP th. 0, mm th. 0,8 mm blocks VSP AD, A D CE. CEE 099.0 099 8.0 099 9.0 09 89.00 0 0. 0.00 0 09.0 000 8. 0 80.0 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 09.0 09.0 0 8. 0. 0. 0.0 0.0 0 8. 0 0. 08. 08. 0. 0. 0 0.0 09.0 08 9.0 00 0. 00 8.0 00.00 099. 099. See section on markers marking method C C0 TM () A circuit separator SCAD and 00 V () rated voltage are required with these accessories. () See column on right page : "Various applications". 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

D /..T D /.. D /.. D /.. D /..C Spacing mm +0,0.8" Spacing mm +0,0.8" Spacing mm +0,0.8" Spacing mm +0,0.8" Spacing mm +0,0.8" 099 08.0 D /. equipped with DIA. mm test socket for test side screw. 099 08. 099 0. 099 08.0 099 0. D /. with partition D /.. equipped with DIA. mm test socket for test D /.. equipped with DIA. mm test socket for test D /.. equipped with DIA., mm flexible test socket for connector - () () () () () () Part numbers 099.0 099 8.0 099 9.0 09 89.00 0 0. 0.00 0 09.0 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 09.0 09.0 0 8. 0. 0. 0.0 0.0 0 8. 0 0. 08. 08. 0. 0. 0 0.0 00 8.0 099. 099. () () () () () () () () () () () () () () ()() ()() ()() () Part numbers 099.0 099 8.0 099 9.0 0 0. 0.00 0 09.0 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 09.0 09.0 0 8. 0. 0. 0.0 0.0 0 8. 0 0. 08. 08. 0. 0. 0 0.0 00 8.0 099. 099. Part numbers 099.0 099 8.0 099 9.0 0 09.0 000 8. voltage: 800 V ( ) 0. 0.0 0.0 0 8. 0 0. 08. 08. 0 0.0 00 8.0 099. 099. Part numbers 099.0 099 8.0 099 9.0 0 09.0 000 8. 0 80.0 voltage: 800 V ( ) 0. 0.0 0.0 0 8. 0 0. 08. 08. 0 0.0 00 8.0 099. 099. Part numbers 099.0 099 8.0 099 9.0 0 09.0 000 8. 0. 0.0 0.0 0 8. 0 0. 08. 08. 0 0.0 00 8.0 099. 099. Various applications D /..C terminal blocks equipped with DIA., mm receive a connector. See catalog electrotechnic general (section 0). BJDP is used for the interconnection with terminal block series "M": spacing mm. BJDP is used for the interconnection with terminal block series "M": spacing mm. BJDP is used for the interconnection with terminal block series "D": spacing 8 mm. or terminal block series "M": spacing 8 or 0 mm. C C0 TM C C0 TM C C0 TM C C0 TM C C0 TM () A circuit separator SCAD and 00 V () rated voltage are required with these accessories. () See column on right: "Various applications". () Use of these accessories requires the user to cut out the partition. Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement - clamp DIN side side -, mm² 0, - mm² - AWG - 8 AWG Spacing 8 mm +0,0." D /8.... Color Part number Standard block Orange D /8. 099 0. Blue D /8.N. 099 0. Black D /8. 099 0.0 ed D /8. 099 0. Ivory D /8. 099 0. Yellow D /8. 099 0. Green D /8. 099 0. 099 0. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. UL CSA 0,-0 mm² -8 AWG -8 AWG 0,- mm² -8 AWG -8 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 000 V 00 V 00 V 8 kv A A A, mm² 8/ AWG 8/ AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection mm mm - mm 0,8- Nm IP 0."." -.".-8.9 lb.in NEMA Notes Standard block 8 mm. For multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part numbers 0 9 8 8 End section grey blue yellow Separator grey Test socket Test device Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) 8 Jumper bar not assembled Post + screw + washer 9 less jumper bar orange IP0 0 Jumper bar Pivoting jumper bar Universal jumper bar Connector plate Comb type jumper bar Protection label for protection label IDC jumper Hand tool kit 8 Semi-automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector FEDAD th. mm FEDAD th. mm FEDAD th. mm SCAD AL () DIA. mm AL () DIA. mm AL () DIA. mm DCO FC orange DIA. mm FC DIA. mm BJM8 A BJM8 A BJM8 A BJM8 A BJM8 A 0 BJMI8 A BJMI8 A BJMI8 A BJMI8 A BJMI8 A 0 BJS8 A 0 EV BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8.8 A 8 BJE8.9 A 9 BJE8.0 A 0 BJB BJP8 0 A BJDP () 0 A spa.8 <-> spa. BJDP () 0 A spa.8 <-> spa. BJDP () 0 A spa.8 <-> spa.0 EL A PC8 0 A PC8 0 A PC8 0 A PC8 0 A 0 EP blocks EP8 blocks VSP AD, A D CE.8 CEE 099.0 099 8.0 099 9.0 09 89.00 0 0. 0.00 0 0. 0 00.00 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 0 9. 0 0. 0.00 0.0 0.0 0 89.0 08 0. 099.0 099.0 099.0 099.00 099.0 099.0 099 8. 099 9. 099 0. 099. 0 8.0 09.0 09.0 0 8. 0. 0 8. 0 9.0 0 0. 0. 0. 0 8.0 0. 0 0.0 00 8.0 099 8. 099. * Black marking for wire size -, mm² ( - AWG) See section on markers marking method TM C80 CAL8 () A separator SC and 00 V () rated voltage are required with these accessories () See column : "Various applications" 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

D /8.. D /8.. D /8.. D /8..C Spacing 8 mm +0,0." Spacing 8 mm +0,0." Spacing 8 mm +0,0." Spacing 8 mm +0,0." 099 0. 099. 099. 099. D /8. with partition D /8.. equipped with DIA. mm test socket for test D /8.. equipped with DIA. mm test socket for test D /8.. equipped with DIA., mm flexible test socket for connector - () Part numbers Part numbers 099.0 099 8.0 099 9.0 Part numbers 099.0 099 8.0 099 9.0 Part numbers 099.0 099 8.0 099 9.0 Part numbers 099.0 099 8.0 099 9.0 Various applications () () () () () () () () () () () 0 0. 0.00 0 0. 0 00.00 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 0 9. 0 0. 0.00 0.0 0.0 0 89.0 08 0. 099.0 099.0 099.0 099.00 099.0 099.0 099 8. 099 9. 099 0. 0 00.00 000 8. 0 00.00 000 8. 0 80.0 0 00.00 000 8. () ()() ()() ()() () 0 8.0 09.0 09.0 0 8. 0. 0 8. 0 9.0 0 0. 0. 0. 0 8.0 0. 0 0.0 00 8.0 099 8. 099. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 099 8. 099. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 099 8. 099. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 099 8. 099. D /8..C terminal blocks equiped with DIA., mm receive a connector described in the specific chapter. Universal jumper bar BJDP is used for the interconnection with terminal block series "M": spacing mm. BJDP is used for the interconnection with terminal block series "M": spacing mm. TM C80 CAL8 TM C80 CAL8 TM C80 CAL8 TM C80 CAL8 BJDP is used for the interconnection with terminal block series "M": spacing 0 mm. () See column : "Various applications". () Use of these accessories requires the user to cut out the partition. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement - clamp DIN Spacing 8 mm +0,0." D /8. Color Part number Standard block D /8. 099. Blue D /8.N. 099 9. Orange D /8. 099 800. side side mm² 0, - mm² AWG - 8 AWG Standard 8 mm block 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. 0,-0 mm² -8 AWG 0,- mm² -8 AWG mm² AWG mm² AWG 000 V 8 kv 00 V A A mm² 8/ AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection mm mm - mm 0,8- Nm IP 0."." -.".-8.9 lb.in NEMA Notes Standard 8 mm block for connection of only one solid or stranded mm² wire. Part number 9 0 8 8 End section grey blue Separator grey Test socket Test device Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) 8 Jumper bar not assembled Post + screw + washer 9 less jumper bar orange IP0 0 Jumper bar Pivoting jumper bar Universal jumper bar Connector plate Comb type jumper bar Protection label for protection label IDC jumper Hand tool kit 8 Semi-automatic tool 9 eplacement head kit 0 Extraction tool kit FEDAD th. mm FEDAD th. mm SCAD AL () DIA. mm AL () DIA. mm AL () DIA. mm DCO FC () Orange DIA. mm FC () DIA. mm BJM8 () A BJM8 () A BJM8 () A BJM8 () A BJM8 () A 0 BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A 0 BJS8 A 0 EV BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8.8 A 8 BJE8.9 A 9 BJE8.0 A 0 BJB BJP8 ()() 0 A BJDP ()() 0 A spa. 8 <-> spa. BJDP ()() 0 A spa. 8 <-> spa. BJDP ()() 0 A spa. 8 <-> 0 spa. EL () A PC8 0 A PC8 0 A PC8 0 A PC8 0 A 0 EP blocks EP8 blocks VSP AD, A 099.0 099 8.0 09 89.00 0 0. 0.00 0 0. 0 00.00 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 0 9. 0 0. 0.00 0.0 0.0 0 89.0 08 0. 099.0 099.0 099.0 099.00 099.0 099.0 099 8. 099 9. 099 0. 099. 0 8.0 09.0 09.0 0 8. 0. 0 8. 0 9.0 0 0. 0. 0. 0 8.0 0. 0 0.0 00 8.0 () BJDP is used for the interconnection with terminal block series "M" : spacing mm. BJDP is used for the interconnection with terminal block series "M" : spacing mm. BJDP is used for the interconnection with terminal block series "M" : spacing 0 mm. * White marking for wire size mm² ( AWG) See section on markers marking method TM C 80 CAL8 () A circuit separator SC is required and 00 V () rated voltage with these accessories. () Forbidden under explosive atmosphere EEX usage. () Only certified for "i" security. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal block Displacement Double deck - clamp DIN side side 0, -, mm² 0, - mm² - AWG - 0 AWG Spacing mm + 0,0 (.8") D /.D. Color Part number Standard block D /. 099.0 Blue D /.N. 099.0 Orange D /. 099.0 Green D /. 099.0 Vertical jumper bar assembly (ITVE accessory ) Terminal block mm, double deck opened 099.0 End stop th. mm BADH V 0 900. End stop th. 9, mm BAMH V 0 8.00 End stop th. 9, mm BAMH V0 V0 09 8.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,8-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 800 V 00 V 00 V kv, A 8 A 8 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in. NEMA Notes Standard block mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part numbers End section grey FEDAD V0 th. mm Separator grey SCAD Test socket AL () DIA. mm AL () DIA. mm Test device DCJ yellow Test plug FC DIA. mm Assembled jumper bar BJM () A (without IP0 protection) BJM () A BJM () A BJM () A BJM () A 0 Assembled jumper bar BJMI () A (with IP0 protection) BJMI () A BJMI () A BJMI () A BJMI () A 0 8 Jumper bar not assembled BJS () A 0 Post + screw + washer EV 9 less jumper bar BJE. A orange IP0 BJE. A 8 BJE. A BJE. A BJE. A BJE. A BJE.8 A 8 BJE.9 A 9 BJE.0 A 0 0 Jumper bar BJB less jumper bar BJ., A to be inserted into jaw BJ., A orange IP0 BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 BJP () A BJA () A 0 9 8 0 Pivoting jumper bar Jumper bar for alternated jumping Connector plate Comb type jumper bar Insulating tip Vertical jumper bar Shield connector 8 Protection label for protection label 9 IDC jumper 0 Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit Test connector EL A PC A PC A PC A PC A 0 EIP ITVE CBDS EP VSP AD, D CE. CEE A blocks 099. 09 89.00 0 0. 0.00 0 09.0 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 0. 0. 0.0 0.0 0 8. 0 0. 09 9.0 08 08. 0. 0. 0 0.0 00 8.0 099. 099. The use of some accessories may decrease the block's voltage rating. For more information, consult us. See section on markers marking method TM C0 C () SC obligatory rated voltage with these accessories. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement Double deck - clamp DIN side side 0, -, mm² 0, - mm² - AWG - 0 AWG D /.D.. Spacing mm + 0,0 (.8") Terminal block mm, double deck closed Colour Part numbers Vertical jumper bar assembly (ITVE accessory ) 099.0 End stop th. mm BADH V 0 900. End stop th. 9, mm BAMH V 0 8.00 End stop th. 9, mm BAMH V0 V0 09 8.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,8-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 800 V 00 V 00 V kv, A 8 A 8 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in. NEMA Notes Standard block mm double deck. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part numbers End section grey Test socket 0 8 9 0 Test device Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer 8 less jumper bar orange IP0 9 Jumper bar 0 less jumper bar to be inserted into jaw orange IP0 Pivoting jumper bar Jumper bar for alternated jumping Connector plate Comb type jumper bar Insulating tip Vertical jumper bar Shield connector Protection label for protection label 8 IDC jumper 9 Hand tool kit 0 Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit Test connector FEDAD V0 th.,0 mm AL () DIA.,0 mm AL () DIA.,0 mm DCJ yellow FC DIA.,0 mm BJM () A BJM () A BJM () A BJM () A BJM () A 0 BJMI () A BJMI () A BJMI () A BJMI () A BJMI () A 0 BJS () A 0 EV BJE. A BJE. A BJE. A BJE. A BJE. A BJE. A BJE.8 A 8 BJE.9 A 9 BJE.0 A 0 BJB BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 BJP () A BJA () A 0 EL A PC A PC A PC A PC A 0 EIP ITVE CBDS EP VSP AD, D CE. CEE A blocks 099. 0 0. 0.00 0 09.0 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 0. 0. 0.0 0.0 0 8. 0 0. 09 9.0 08 08. 0. 0. 0 0.0 00 8.0 099. 099. Some accessories can decrease the block's voltage rating. Consult us for more information. See section on markers marking method C0 C () Use of these accessories requires the user to cut out the partition. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal block Displacement Double deck - clamp DIN side side -, mm² 0, - 0 mm² - AWG - 8 AWG Spacing 8 mm + 0,0 (.") D /8.D. Colour Part numbers Standard block Blue D /8.D.N. 099 0. Positionning of the vertical jumper bar (ITVE accessory ) Opened double deck terminal block 8 mm, 099 00. End stop th. mm BADH V 0 900. End stop th. 9, mm BAMH V 0 8.00 End stop th. 9, mm BAMH V0 V0 09 8.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. 0,-0 mm² 0,- mm² -, mm² -, mm² 800 V 8 kv A, mm² UL CSA Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection mm -,mm 0,8 - Nm IP 0."." -.". - 8.9 lb.in. Notes Standard block 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part numbers End section grey FEDAD V0 th. mm 099. Test socket AL () DIA. mm 0 0. AL () DIA. mm 0.00 AL () DIA. mm 0 0. Test device DCO orange 0 00.00 Test plug FC () DIA. mm 000 8. FC () DIA. mm 0 80.0 Assembled jumper bar BJM8 () A 08 0.0 (without IP0 protection) BJM8 () A 08. BJM8 () A 08. BJM8 () A 08. BJM8 () A 0 08 9.00 Assembled jumper bar BJMI8 () A 0 9. (with IP0 protection) BJMI8 () A 0 0. BJMI8 () A 0.00 BJMI8 () A 0.0 BJMI8 () A 0 0.0 Jumper bar not assembled BJS8 A 0 0 89.0 Post + screw + washer EV 08 0. 8 less jumper bar BJE8. A 099.0 orange IP0 BJE8. A 099.0 BJE8. BJE8. A A 099.0 099.00 BJE8. A 099.0 0 BJE8. A 099.0 BJE8.8 A 8 099 8. BJE8.9 A 9 099 9. BJE8.0 A 0 099 0. 9 Jumper bar BJB 099. 0 Pivoting jumper bar BJP8 ()() 0 A 0 8.0 Connector plate EL () A 0. Comb type jumper bar PC8 0 A 0. PC8 0 A 0.0 PC8 0 A 0.0 PC8 0 A 0 0 8. Insulating tip EIP 0 0. Vertical jumper bar ITVE 09 9.0 Protection label EP 0. EP8 0 8.0 for protection label VSP 0. IDC jumper AD, A 0 0.0 Hand tool kit Semi-automatic tool 9 8 Pneumatic tool D 9 eplacement head kit 00 8.0 0 Bridging plug BP8.A 0 888.0 Test connector CE.8 099 8. CEE 099. 8 0 The use of some accessories may decrease the block's voltage rating. For more information, consult us. See section on markers marking method TM C80 CAL8 () SC obligatory rated voltage with these accessories. () Forbidden under explosive atmosphere EEX usage. () Only certified for "i" security. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal block Displacement Double deck - clamp DIN side side -, mm² 0, - 0 mm² - AWG - 8 AWG Spacing 8 mm + 0,0 (.") D /8.D.. Colour Part numbers Positionning of the vertical jumper bar (ITVE accessory ) Double deck opened terminal block 8 mm 099 0. End stop th. mm BADH V 0 900. End stop th. 9, mm BAMH V 0 8.00 End stop th. 9, mm BAMH V0 V0 09 8.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. 0,-0 mm² 0,- mm² -, mm² -, mm² 800 V 8 kv A, mm² UL CSA Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection mm -,mm 0,8 - Nm IP 0."." -.". - 8.9 lb.in. Notes Standard block 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part numbers End section grey FEDAD V0 th. mm 099. Test socket AL () DIA. mm 0 0. AL () DIA. mm 0.00 AL () DIA. mm 0 0. Test device DCO 0 00.00 Test plug FC () DIA. mm 000 8. FC () DIA. mm 0 80.0 Assembled jumper bar BJM8 () A 08 0.0 (without IP0 protection) BJM8 () A 08. BJM8 () A 08. BJM8 () A 08. BJM8 () A 0 08 9.00 Assembled jumper bar BJMI8 () A 0 9. (with IP0 protection) BJMI8 () A 0 0. BJMI8 () A 0.00 BJMI8 () A 0.0 BJMI8 () A 0 0.0 Jumper bar not assembled BJS8 A 0 0 89.0 Post + screw + washer EV 08 0. 8 less jumper bar BJE8. A 099.0 orange IP0 BJE8. A 099.0 BJE8. BJE8. A A 099.0 099.00 BJE8. A 099.0 0 BJE8. A 099.0 BJE8.8 A 8 099 8. BJE8.9 A 9 099 9. BJE8.0 A 0 099 0. 9 Jumper bar BJB 099. 0 Pivoting jumper bar BJP8 ()() 0 A 0 8.0 Connector plate EL () A 0. Comb type jumper bar PC8 0 A 0. PC8 0 A 0.0 PC8 0 A 0.0 PC8 0 A 0 0 8. Insulating tip EIP 0 0. Vertical jumper bar ITVE 09 9.0 Protection label EP 0. EP8 0 8.0 for protection label VSP 0. IDC jumper AD, A 0 0.0 Hand tool kit Semi-automatic tool 9 8 Pneumatic tool D 9 eplacement head kit 00 8.0 0 Bridging plug BP8.A 0 888.0 Test connector CE.8 099 8. CEE 099. 8 0 The use of some accessories may decrease the block's voltage rating. For more information, consult us. See section on markers marking method TM C80 CAL8 () SC obligatory rated voltage with these accessories. () Forbidden under explosive atmosphere EEX usage. () Only certified for "i" security. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Compatibility of / clamp terminal blocks with clamp/ clamp switch terminal blocks for neutral circuits Standard / clamp terminal blocks with and 8 mm spacing are compatible with clamp/ clamp switch terminal blocks for neutral circuits. Wire connection and removal is possible with busbar in its place. / clamp terminal blocks for neutral circuits D,/.N. D /.N. Spacing mm + 0,0 (.98") Spacing mm + 0,0 (.8") D /8.N. D /.D.N. Spacing 8 mm + 0,0 (.") Spacing mm + 0,0 (.8") D /8.N. Spacing 8 mm + 0,0 (.") / clamp terminal blocks with blue body can be used for neutral connection. Blue color permits a good identification. wire size mm² wire size mm² wire size mm² wire size mm² wire size mm² D,/.N. 099. D /.N. 099 0. D /8.N. 099 0. D /.D.N. 099.0 D /8.N. 099 9. D /8.D.N. Spacing 8 mm + 0,0 (.") wire size mm² D /8.D.N. 099 0. and accessories of these blocks are described in standard / clamp block pages. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement Ground terminal blocks not electrically connected to the mounting rail - Compression-clamp DIN D,/.PI. Spacing mm + 0.0.98" side side 0. - mm² 0. -, mm² - 8 AWG - AWG D /.PI. Spacing mm + 0.0.8" side side 0. -, mm² 0. - mm² - AWG - AWG D /8.PI. Spacing 8 mm + 0,0." side side -. mm² 0. - mm² - AWG - 8 AWG and accessories, see clamp terminal blocks. * Black marking for wire side -, mm² (- AWG) P/N Yellow body / Green marking D,/.PI. 099 8. P/N P/N Yellow body / Green marking Yellow body / Green marking D/.PI. 099 0.0 D/8.PI. 099 0.0 current wire size Other characteristics Approvals End section grey 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A/ s. mm² 8 AWG Wire stripping ecommended ecommended Protection 9, mm, mm 0,-0, Nm IP0.".".-. lb.in NEMA FEDAD V0 th. mm UL 0,- mm² - AWG 0,- mm² - AWG 0,-, mm² - AWG 0,-, mm² - AWG 80 A/ s., mm² AWG CSA Wire stripping ecommended ecommended Protection 9, mm mm 0,-0,8 Nm IP0.".".-. lb.in NEMA UL CSA 0,-0 mm² -8 AWG 0,- mm² -8 AWG -8 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 00 A/ s., mm² AWG AWG Wire stripping ecommended ecommended Protection mm mm- mm 0,8- Nm IP0."." -.".-8.9 lb.in NEMA P/N P/N P/N 099.0 FEDAD V0 th. mm 099.0 FEDAD V0 th. mm 099.0 See section on marking Marking method C C0 TM C C0 TM TM C80 CAL8 Terminal blocks displacement Ground terminal blocks not electrically connected to the mounting rail - Compression-clamp DIN D /8.PI. Spacing 8 mm + 0.0." side side mm² / AWG 0. - mm² wire only - 8 AWG and accessories, see clamp terminal blocks. * White marking for wire size mm² ( AWG) P/N P.N P/N Yellow body / Green marking D/8.PI.. 099. current wire size Other characteristics Approvals End section grey UL CSA 0,-0 mm² -8 AWG 0,- mm² -8 AWG -8 AWG mm² AWG AWG mm² AWG AWG 80 A/ s. mm² AWG AWG Wire stripping ecommended ecommended Protection mm mm- mm 0,8- Nm IP0."." -.".-8.9 lb.in NEMA FEDAD V0 th. mm P/N 099.0 UL CSA Wire stripping ecommended ecommended Protection UL CSA Wire stripping ecommended ecommended Protection P/N P/N See section on marking Marking method TM C80 CAL8 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks displacement Ground terminal blocks electrically connected to the mounting rail - Compression-clamp DIN D,/.P. Spacing mm + 0.0.98" side side 0. - mm² 0. -, mm² - 8 AWG - AWG D /.P. Spacing mm + 0.0.8" side side 0. -. mm² 0. - mm² - AWG - AWG D /8.P. Spacing 8 mm + 0.0." side side -. mm² 0. - mm² - AWG - 8 AWG and accessories, see clamp terminal blocks. * Black marking for wire size -. mm² (- AWG) current wire size Other characteristics Approvals End section yellow grey P/N Green body / Yellow marking D,/.P. 099 00.0 D/.P. 099 00.0 D/8.P. 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A/ s. mm² 8 AWG Wire stripping ecommended ecommended Protection 9, mm, mm 0,-0, Nm IP0.".".-. lb.in NEMA UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 80 A/ s., mm² AWG AWG Wire stripping ecommended ecommended Protection 9, mm mm 0,-0,8 Nm IP0.".".-. lb.in NEMA UL CSA 0,-0 mm² -8 AWG -8 AWG 0,- mm² -8 AWG -8 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 00 A/ s., mm² AWG AWG Wire stripping ecommended ecommended Protection mm mm- mm 0,8- Nm IP0."." -.".-8.9 lb.in NEMA P/N P/N P/N FEDAD V0 th. mm 099 9.0 FEDAD V0 th. mm 099 9.0 FEDAD V0 th. mm 099 9.0 FEDAD V0 th. mm 099.0 FEDAD V0 th. mm 099.0 FEDAD V0 th. mm 099.0 P/N Green body / Yellow marking P/N Green body / Yellow marking 099 8. See section on marking Marking mode C C0 TM C C0 TM TM C80 CAL8 Terminal blocks displacement Ground terminal blocks electrically connected to the mounting rail - Compression-clamp DIN D /8.P. Spacing 8 mm + 0.0." side side mm² / AWG 0. - mm² wire only - 8 AWG Double deck terminal blocks displacement Ground terminal blocks electrically connected to the mounting rail - Compression-clamp DIN D /.D.P. Spacing mm + 0.0.8" side side 0. -. mm² 0. - mm² - AWG - AWG 08,." 8,.8,9.99" and accessories, see clamp terminal blocks. * white marking for wire size.- mm² (- AWG) current wire size Other characteristics P/N Green body / Yellow marking D/8.P. 099. 0,-0 mm² -8 AWG 0,- mm² -8 AWG mm² AWG mm² AWG 80 A/ s. mm² AWG Wire stripping ecommended ecommended Protection mm mm- mm 0,8- Nm IP0."." -.".-8.9 lb.in NEMA and accessories, see clamp terminal blocks. current wire size Other characteristics 0,- mm² 0,- mm² D /.D.P. UL,8. P/N Green body / Yellow marking 099 9. CSA 0,8-, mm² 0,-, mm² 80 A/ s., mm² Wires tripping ecommended ecommended Protection 9, mm mm 0,-0,8 Nm.".".-. lb.in Approvals End section yellow grey P/N FEDAD V0 th. mm 099 9.0 FEDAD V0 th. mm 099.0 Approvals End section grey FEDAD V0 th. P/N mm 099. See section on markers Marking method TM C80 CAL8 See section on markers Marking method C C0 TM Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

displacement Heavy duty switch terminal blocks with blade clamp - DIN D,/.SN. Spacing mm +0,0.98" side side 0, - mm² 0, -, mm² -8 AWG - AWG D,/.SNT... Spacing mm +0,0.98" side side 0, - mm² 0, -, mm² -8 AWG - AWG End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For two wire connection max., the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point DIA. mm (or DIA.. mm on block D,/.SFAT.) on the side of the block. 8 End section grey orange Test plug Comb-type jumper Insulating tip Shield connector Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 less jumper bar to be inserted into jaw orange IP0 Test connector Colour Part numbers Colour Part numbers With DIA. mm test on two sides. Orange D,/.SN. D,/.SN. 099.0 099.0 Orange D,/.SNT. D,/.SNT. 099 8. 099 9. With DIA.. mm test on two sides. D,/.SNT. 099 0. * 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 V 00 V kv 0 A mm² /8 AWG Wire stripping ecommended ecommended length (screw) screwdriver torque protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA FEDAD th. mm FEDAD th. mm FC DIA. mm PC 0 A PC 0 A 0 EIP CBD th. 0,8 mm D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE * 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 V 00 V kv 0 A mm² /8 AWG Wire stripping ecommended ecommended length (screw) screwdriver torque protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA Part numbers 099.00 FEDAD th. mm 099.0 FEDAD th. mm 000 8. FC DIA. mm 0.0 PC 0 A 0. PC 0 A 0 0 0. 09.0 EIP CBD th. 0,8 mm 00 8.0 00 9.0 D BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 98. BJ., A 00 9.0 BJ.0, A 0 00 9.0 BJ.0, A 0 099. 099. CE. CEE Part numbers 099.00 099.0 000 8. 0.0 0. 0 0. 09.0 00 8.0 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 099. 099. 9 0 See section on markers marking method C C0 C C0 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement Heavy duty switch terminal blocks with blade clamp - DIN D /.SN. Spacing mm +0,0.8" side side 0, -, mm² 0, - mm² - AWG - 0 AWG D /.SNT... Spacing mm +0,0.8" side side 0, -, mm² 0, - mm² - AWG - 0 AWG End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard block mm. For multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA.. mm on block D /.SNT. ) on the side of the block. End section grey Test plug Comb-type jumper bar IDC jumper Shield connector Hand tool kit Semi-automatic tool 8 Pneumatic tool kit 9 eplacement head kit 0 Extraction head kit less jumper bar to be inserted into jaw orange IP0 Test connector Colour Part numbers Orange D /.SN. D /.SN. Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD th. mm FC DIA. mm PC A 0 AD, A CBD th. 0,8 mm D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE UL 099 0. 099 08.0 CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 00 V 00 V 00 V kv 0 A 0 A 0 A, mm² 0/ AWG 0/ AWG Colour Part numbers With DIA. mm screw test socket for test on screw side. Orange With DIA.. mm screw test socket for test on screw side. D /.SNT. 099 9.0 UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG Section D /.SNT. D /.SNT. Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0 ".".-. lb.in NEMA Part numbers 099.00 FEDAD th. mm 000 8. FC DIA. mm 0. PC A 0 0 0.0 AD, A 09.0 CBD th. 0,8 mm D 00 8.0 00 9.0 BJ., A 00 9.0 BJ., A 00 9.00 BJ., A 00 9.0 BJ., A 00 98. BJ.0, A 0 00 99. BJ.0, A 0 099. CE. 099. CEE 099. 099. 00 V 00 V 00 V kv 0 A 0 A 0 A, mm² 0/ AWG 0/ AWG Part numbers 099.00 000 8. 0. 0 0.0 09.0 00 8.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 099. 099. 9 8 0 See section on markers Marking method C0 C C0 C Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement Heavy duty switch terminal blocks with blade - clamp DIN D /8.SN. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG D /8.SNT... Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard bloc 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA. mm on block D /.SNT. ) on the side of the block. * Black marking for wire size -, mm² ( - AWG) End section grey Test plug Comb-type jumper bar IDC jumper Hand tool kit Semi automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 Test connector Colour Part numbers Colour Part numbers With DIA mm screw test socket for test on screw side. Orange D /8.SN. D /8.SN. 099. 099 8. Orange D /8.SNT. D /8.SNT. 099 9. 099 0.00 With DIA. mm screw test socket for test on screw side. D /8.SNT. 099. Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD th. mm FC DIA. mm PC8 A 0 AD, A D CE.8 CEE UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG -, mm² - AWG - AWG -, mm² -AWG - AWG 00 V 00 V 00 V kv A A A, mm² 0/ AWG 0/ AWG 099.00 000 8. 0. 0 0.0 00 8.0 099 8. 099. A A A Section, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD th. mm FC DIA. mm PC8 A 0 AD, A D CE.8 CEE UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 00 V 00 V 00 V kv Part numbers 099.00 000 8. 0. 0 0.0 00 8.0 099 8. 099. 8 9 0 See section on markers Marking method C80 CAL8 C80 CAL8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Selection guide for different types of plugs s of plugs s of fuses D,/.S. D,/.SFA... D /.S. D /8.S. Switching function Short-circuit plug BNC without test 09 8. BNCT8 with test 09 9.0 closed 8,." Plug open 9." Plug with solder tags and screws () Soldered fuses type FUBS - 0, to A - 0 V Flat fuses type FUPLV - to A - 0 V BNS.D 09 8. BNSV 09 8. BNSV8 09 9.0 Fuse protection function Fuse holder plug Automotive miniature fuses () type FUAUTO A to A - V maxi BFSAUTO 099 8.0 V0 black BFAUTO V0 black 099 8. Fuses x 0 Fuse holder plug type FU0-0, to A - 0 V Fuses x type FU -, to, A - 0 V BNF BNFD () BNFD() BNFL () 09 998. 09 999. 09 9. 09 9. BNF 09 9.0 s of fuses Soldered fuses FUBS 0, A FUBS A FUBS A FUBS A FUBS A 0 89. 0 89. 0 89.0 0 89. 0 89. Flat fuses FUPLV A FUPLV A FUPLV A Fuses x 0 mm FU0 0, A FU0 A FU0 A FU0. A FU0 A 0008 09.0 0008 09. 0008 098.0 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 Automotive miniature fuses FUAUTO A 09 89. FUAUTO A 09 880.0 Fuses x mm FU. A 0. FU A 0. FU. A 0 8.0 FU A 0 9.0 FU. A 0 0.0 Nota : () Compatible with electronic components max.diameter or thickness for components : - plug BNSV : mm/." max. - plug BNSV8 : mm /."max. () For all fuses, the dissipated load should remain under 0,8 W. () with led V AC/DC. () with led 8 V AC/DC. () avec neon lamp 0-0 V AC/DC. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement Heavy duty switch blocks with plug clamp - DIN D,/.S. Spacing mm +0,0.98" side side 0, - mm² 0, -, mm² -8 AWG - AWG D /.S. Spacing mm +0,0.8" side side 0, -, mm² 0, - mm² - AWG - 0 AWG Switch connection block mm by polarized plug, delivered separately. Colour Part number Colour Part number End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes mm and mm blocks. For multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. * Black marking for wire size -, mm² ( - AWG) AC/DC 8 - - 0 9 End section grey orange Comb-type jumper bar Insulating tip IDC jumper Fuse-holder plug ivory Plug extractor Soldered fuses Short-circuit plug 8 Fuse-holder plug (for soldered fuses or flat fuses) 9 Fuse-holder plug (automotive) 0 Fuse-holder plug (for x0 or x fuses) () BNF with LED 8V AC/DC BNF with LED V AC/DC BNF with neon lamp 0-0V Shield connector Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit less jumper bar to be inserted into jaw orange IP0 8 Test connector See section on markers marking method D,/.S. 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 V () 00 V () kv 0 A mm² Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA FEDAD th. mm FEDAD th. mm PC 0 A PC 0 A 0 EIP BNS.D EXBN FUBS FUBS FUBS FUBS FUBS th. mm 0, A A A A A CBD th. 0,8 mm D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE 099.0 D /.S. UL CSA 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 00 V () 00 V () 00 V () kv 0 A 0 A A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA mm mm PC A 0 AD, EXBN BNC () BNSV () C C0 C0 C () Leakage current with LED V or 8 V : <, ma and with neon lamp 0 or 0 VAC/DC : < 0, ma. () See selection guide for dimensions of plugs and type of fuses to use. () Terminal block insulating voltage, working voltage according to fuse. Part numbers 099.00 FEDAD 099.0 FEDAD 0.0 0. 0 0. 09 8. 0 08.0 0 89. 0 89. 0 89.0 0 89. 0 89. 09.0 00 8.0 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 099. 099. A mm mm BFAUTO V0 black BNFV0 V0 th. mm BNF D () V0 BNF D () V0 BNF L () V0 CBD D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE th. th. th. th. th. th. th. th. mm mm mm 0,8 mm 099 0. Part numbers 099.00 099.0 0. 0 0.0 0 08.0 09 8. 09 8. 099 8. 09 998. 09 999. 09 9. 09 9. 09.0 00 8.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 099. 099. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement Heavy duty switch blocks with plug - clamp - Double screw clamp DIN D /8.S. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG D /8.S.A. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - AWG Switch connection block 8 mm by polarized plug, delivered separately. Switch connection block 8 mm by polarized plug, delivered separately. Colour Part number Colour Part number D /8.S. 099. Orange D /8.S.A. D /8.S.A. 099 90. 099 9.00 End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes 8 mm blocks. For multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. * Black marking for wire size -, mm² ( - AWG) 8 - - End section grey orange Comb-type jumper bar IDC jumper Short-circuit plug () Fuse holder plug (for soldered fuses or flat fuses) () Fuse holder plug (for x 0 or x fuses) () Plug extractor 8 Hand tool kit 9 Semi-automatic tool 0 Pneumatic tool kit eplacement head kit Extraction head kit Test connector UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG Section 00 V () 00 V () 00 V () kv A A A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD th. mm PC A 0 AD, A BNCT8 th. 8 mm BNSV8 th. 8 mm BNF EXBN D CE.8 CEE th. 8 mm Part numbers 099.00 0. 0 0.0 09 9.0 09 9.0 09 9.0 0 08.0 00 8.0 099 8. 099. UL CSA 0,- mm² - AWG - AWG 0,- mm² - AWG - AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 00 V () kv 0 A, mm² AWG AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD th. mm 099 9. FEDAD th. mm 099 99.0 PC8 0. AD, A 0 0.0 BNCT8 th. 8 mm 09 9.0 BNSV8 th. 8 mm 09 9.0 BNF EXBN D CE.8 CEE th. 8 mm 09 9.0 0 08.0 00 8.0 099 8. 099. 9 0 See section on markers Marking method CAL8 C80 C80 () See selection guide for dimensions of plugs and type of fuses to use. () Terminal block insulating voltage, working voltage according to fuse. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

displacement Heavy duty switch terminal blocks with fuse-holder plug for automotive Mini Fuse clamp - DIN D,/.SFA.. Spacing mm +0,0.98" side side 0, - mm² 0, -, mm² -8 AWG - AWG D,/.SFAT.. Spacing mm +0,0.98" side side 0, - mm² 0, -, mm² -8 AWG - AWG Colour Part numbers Orange D,/.SFA. D,/.SFA. 099.0 099.0 Colour Part numbers With DIA. mm screw test socket for test on screw side. D,/.SFAT. 099 8. With DIA.. mm screw test socket for test on screw side. D,/.SFAT. 099 9. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For two wire connection max., the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point DIA. mm (or DIA.. mm on block D,/.SFAT.) on the side of the block. 0 8 End section grey orange Test plug Comb-type jumper Fuse-holder plug black Mini Fuse - V max. Shield connector Hand tool kit 8 Semi-automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit less jumper bar to be inserted into jaw orange IP0 Test connector * 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 00 V () 0 V () kv A mm² Wire stripping ecommended ecommended length (screw) screwdriver torque protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD th. mm 099.00 FEDAD th. mm 099.0 FC DIA. mm 000 8. PC 0.0 PC 0 0. BFAUTO 099 8.0 FUAUTO A 09 89. FUAUTO A 09 880.0 CBD th. 0,8 mm 09.0 D 00 8.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 98. BJ.0, A 0 00 9.0 BJ.0, A 0 00 9.0 CE. CEE 099. 099. * 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 00 V () 0 V () kv A mm² Wire stripping ecommended ecommended length (screw) screwdriver torque protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD th. mm 099.00 FEDAD th. mm 099.0 FC DIA. mm 000 8. PC 0.0 PC 0 0. BFAUTO 099 8.0 FUAUTO A 09 89. FUAUTO A 09 880.0 CBD 0,8 mm 09.0 D BJ., A 00 8.0 00 9.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 98. BJ.0, A 0 00 9.0 BJ.0, A 0 00 9.0 CE. CEE 099. 099. 9 See section on markers marking method C C0 C C0 () Terminal block insulating voltage. Working voltage according to fuse ( V max.). Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement Fuse blocks for x 0 mm and x mm fuses Open in the opposite direction - clamp DIN D /8.SF.I. Spacing 8 mm +0,0." side side 0, -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip D /8.SFT.I. Spacing 8 mm +0,0." side side 0, -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip Color Part numbers Orange D /8.SF.I. D /8.SF.I. 099 8.0 099 8.0 Color Part number With DIA. mm screw test socket for test on screw side. D /8.SFT.I. 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard block 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA. mm on block D /.SNT. ) on the side of the block. 0 9 8 End section grey Test plug Comb-type jumper bar IDC jumper Assembly rod Assembly ring x0 fuses - 0 V x fuses - 0 V 8 Hand tool kit 9 Semi automatic kit 0 Pneumatic tool kit eplacement head kit Extraction tool kit Test connector UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD0 th., mm FC V DIA. mm PC8 V A 0 AD, V A TGA8 TGA8 TGA8 ANT FU0 0,A FU0 A FU0 A FU0,A FU0 A FU,A FU A FU,A FU A FU,A D CE.8 CEE 0 V () 00 V () 00 V () 8 kv, A 0 A 0 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 0 V () 00 V () 00 V () 8 kv Nominale, A 0 A 0 A Section, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD0 th., mm FC V DIA. mm PC8 V A 0 AD, V A TGA8 TGA8 TGA8 ANT FU0 0,A FU0 A FU0 A FU0,A FU0 A FU,A FU A FU,A FU A FU,A D CE.8 CEE Part numbers 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. See section on marking Marking method C80 CAL8 C0 on grip C80 CAL8 () Terminal block insulation voltage. Working voltage according to fuse. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement Fuses block for x 0 mm and x mm Open in the opposite direction - clamp DIN - D /8.SF...I. Blown fuse indicator Spacing 8 mm +0,0." side side 0, -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip D /8.SF...T.I. Blown fuse indicator Spacing 8 mm +0,0." side side 0, -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip Colour Part numbers Colour Part numbers () () () D /8.SFL.I. D /8.SFD.I. D /8.SFD.I. 099 80. 099 8.0 099 8.0 () () () D /8.SFLT.I. D /8.SFDT.I. D /8.SFDT.I. 099 8.0 099 8.00 099 8.0 End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard bloc 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA. mm on block D /.SNT. ) on the side of the block. 0 9 8 End section grey Test plug Comb-type jumper bar IDC jumper Assembly rod Assembly ring x0 fuses - 0 V x fuses - 0 V 8 Hand tool kit 9 Semi automatic kit 0 Pneumatic tool kit eplacement head kit Extraction tool kit Test connector / Gauge 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD0 th., mm FC DIA. mm PC8 A 0 AD, A TGA8 TGA8 TGA8 ANT FU0 0, A FU0 A FU0 A FU0, A FU0 A FU, A FU A FU, A FU A FU, A D CE.8 CEE UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 00 V 00 V 00 V kv, A 0 A 0 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended protection Part numbers 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 00 V 00 V 00 V kv, A 0 A 0 A / Gauge, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD0 th., mm FC DIA. mm PC8 A 0 AD, A TGA8 TGA8 TGA8 ANT FU0 0, A FU0 A FU0 A FU0, A FU0 A FU, A FU A FU, A FU A FU, A D CE.8 CEE Part numbers 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. () Blown-fuse indicator by 0 V - 0 V neon lamp (leakage current with neon lamp < 0, ma (0 V) - < 0, ma (0 V)). () Blown-fuse indicator by LED V ( +V labeled) (leakage current with LED V or 8 V <, ma). () Blown-fuse indicator by LED 8 V ( +8V labeled) (leakage current with LED V or 8 V <, ma). See section on marking Marking method C80 CAL8 C0 on grip C80 CAL8 C0 on grip 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement Fuse blocks for x 0 mm and x mm fuses Open in the opposite direction - clamp DIN D /8.SF.I. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip D /8.SFT.I. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip Color Part numbers Orange D /8.SF.I. D /8.SF.I. 099. 099. Color Part number With DIA. mm screw test socket for test on screw side. D /8.SFT.I. 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 9, mm BAM V 00 00. End stop th. 9, mm BAM V0 V0 099 0.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard block 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA. mm on block D /.SNT. ) on the side of the block. * - Black marking + notches for wire size -, mm² (- AWG) 0 9 8 End section grey Test plug Comb-type jumper bar IDC jumper Assembly rod Assembly ring x0 fuses - 0 V x fuses - 0 V 8 Hand tool kit 9 Semi automatic kit 0 Pneumatic tool kit eplacement head kit Extraction tool kit Test connector UL CSA UL CSA pending pending pending pending 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 0 V () 00 V () 00 V () 8 kv, A 0 A 0 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD0 th., mm FC V DIA. mm PC8 V A 0 AD, V A TGA8 TGA8 TGA8 ANT FU0 0, A FU0 A FU0 A FU0, A FU0 A FU, A FU A FU, A FU A FU, A D CE.8 CEE 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. 0 V () 00 V () 00 V () 8 kv, A 0 A 0 A Section, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD0 th., mm 099 8. FC V DIA. mm 000 8. PC8 V A 0 0. AD, V A 0 0.0 TGA8 08. TGA8 08. TGA8 08. ANT FU0 0, A 08. 0008 88. FU0 A 0008 90. FU0 A 0008 9.00 FU0, A 0008 89. FU0 A 0008 9.0 FU, A 0. FU A 0. FU, A 0 8.0 FU A 0 9.0 FU, A 0 0.0 D CE.8 CEE 00 8.0 099 8. 099. See section on marking Marking method C80 CAL8 C0 on grip () Terminal block insulation voltage. Working voltage according to fuse. C80 CAL8 C0 on grip Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement Fuse blocks for x 0 mm and x mm fuses Open in the opposite direction - clamp DIN D /8.SF...I. Blown fuse indicator Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip D /8.SF...T.I. Blown fuse indicator Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard block 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA. mm on block D /.SNT. ) on the side of the block. * - Black marking + notches for wire size -, mm² ( - AWG) 0 9 8 End section grey Test plug Comb-type jumper bar IDC jumper Assembly rod Assembly ring x0 fuses - 0 V x fuses - 0 V 8 Hand tool kit 9 Semi automatic kit 0 Pneumatic tool kit eplacement head kit Extraction tool kit Test connector Color Part numbers () () () D /8.SFL.I. D /8.SFD.I. D /8.SFD.I. UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD0 th., mm FC V DIA. mm PC8 V A 0 AD, V A TGA8 TGA8 TGA8 ANT FU0 0, A FU0 A FU0 A FU0, A FU0 A FU, A FU A FU, A FU A FU, A D CE.8 CEE 099.0 099 9. 099. 00 V () 00 V () 00 V () kv, A 0 A 0 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. Color Part number With DIA. mm screw test socket for test on screw side. () () () D /8.SFLT.I. D /8.SFDT.I. D /8.SFDT.I. UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG -, mm² - AWG - AWG -, mm² - AWG - AWG 00 V () 00 V () 00 V () kv, A 0 A 0 A Section, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD0 th., mm FC V DIA. mm PC8 V A 0 AD, V A TGA8 TGA8 TGA8 ANT FU0 0, A FU0 A FU0 A FU0, A FU0 A FU, A FU A FU, A FU A FU, A D CE.8 CEE 099 8. 099 0. 099. Part numbers 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. () Blown-fuse indicator by 0 V - 0 V neon lamp (leakage current with neon lamp < 0, ma (0 V) - < 0, ma (0 V)). () Blown-fuse indicator by LED V ( +V labeled) (leakage current with LED V or 8 V <, ma). () Blown-fuse indicator by LED 8 V ( +8V labeled) (leakage current with LED V or 8 V <, ma). See section on marking Marking method C80 CAL8 C0 on grip C80 CAL8 C0 () Terminal block insulation voltage. Working voltage according to fuse. on grip 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement "Neutral" switch block Open in the opposite direction - clamp DIN D /8.SNN.I. Spacing 8 mm +0,0." side side 0, -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip D /8.SNNT.I. Spacing 8 mm +0,0." side side 0, -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip Colour Part number body / Blue grip D /8.SNN.I. 099 8. Colour Part number With DIA. mm screw test socket for test on screw side. body / Blue grip D /8.SNNT.I. 099 9. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard block 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA. mm on block D /.SNT. ) on the side of the block. End section grey Test plug Comb-type jumper bar IDC jumper Assembly rod Assembly ring Hand tool kit 8 Semi automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector UL CSA 0,- mm² -0 AWG -0 AWG 0,- mm² -0 AWG -0 AWG 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD0 th., mm FC DIA. mm PC8 A 0 AD, A TGA8 TGA8 TGA8 ANT D CE.8 CEE 0 V 00 V 00 V 8 kv 0 A 0 A 0 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 00 8.0 099 8. 099. UL CSA 0,- mm² 0,-, mm² -0 AWG - AWG -0 AWG - AWG 0,- mm² 0,-, mm² -0 AWG - AWG -0 AWG - AWG 0 A 0 A 0 A Section, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD0 th., mm FC DIA. mm PC8 A 0 AD, A TGA8 TGA8 TGA8 ANT D CE.8 CEE 0 V 00 V 00 V 8 kv Part numbers 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 00 8.0 099 8. 099. 0 8 9 See section on markers Marking method C80 CAL8 C0 on grip C80 CAL8 C0 on grip Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement "Neutral" switch block Open in the opposite direction - clamp DIN D /8.SNN.I. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip D /8.SNNT.I. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG Closed grip Open grip Color Part number Color Part number With DIA. mm screw test socket for test on screw side. body / Blue grip body / Blue grip D /8.SNN.I. 099. D /8.SNNT.I. 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard block 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. All switch terminal blocks offer a test point (DIA. mm or DIA. mm on block D /.SNT. ) on the side of the block. * - Black marking + notches for wire size -, mm² ( - AWG) End section grey Test plug Comb-type jumper bar IDC jumper Assembly rod Assembly ring Hand tool kit 8 Semi automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector UL CSA 0,- mm² -, mm² -0 AWG - AWG -0 AWG - AWG 0,- mm² -, mm² -0 AWG - AWG -0 AWG - AWG, A 0 A 0 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEDAD0 FC PC8 AD, TGA8 TGA8 TGA8 ANT D CE.8 CEE 0 V 00 V 00 V 8 kv th., mm DIA. mm A 0 A Part numbers 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 00 8.0 099 8. 099. UL CSA 0,- mm² -, mm² -0 AWG - AWG -0 AWG - AWG 0,- mm² -, mm² -0 AWG - AWG -0 AWG - AWG Section 0 V 00 V 00 V 8 kv, A 0 A 0 A, mm² 0/ AWG 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part numbers FEDAD0 FC PC8 AD, TGA8 TGA8 TGA8 ANT D CE.8 CEE th., mm DIA. mm A 0 A 099 8. 000 8. 0. 0 0.0 08. 08. 08. 08. 00 8.0 099 8. 099. 0 8 9 See section on markers Marking method C80 CAL8 C0 on grip C80 CAL8 C0 on grip Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement with safety connection - clamp DIN side side -, mm² 0, - mm² - AWG 0-0 AWG Spacing 8 mm +0,0." D /8..S Colour Part numbers D /8..S 099.0 clamp terminal for bare wire or equipped with bent lug and wire size. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Lugs stranded UL CSA TS 0.8 0,-0 mm² 0-0 AWG 0,- mm² 0-0 AWG 0,8-, mm² -, mm² - AWG -, mm² - AWG 800 V 00 V 00 V 8 kv A A 0 A, mm² 0/ AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection mm - mm 0,8- Nm IP 0."." -.9".-8.9 lb.in NEMA Notes The use of some accessories may decrease the block's voltage rating. For more information, consult us. side : permits connection of wires max. of the same gauge and nature. * Black marking + notches for wire size -, mm² ( - AWG) Part number 9 0 End section grey Test socket Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer less jumper bar orange IP0 9 Pivoting jumper bar 0 Connector plate IDC jumper Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit Bridging plug Extraction tool kit 8 Test connector See section on markers marking method FEADS th. mm AL () DIA. mm AL () DIA. mm AL () DIA. mm FC () DIA. mm FC () DIA. mm BJM8 () A BJM8 () A BJM8 () A BJM8 () A BJM8 () A 0 BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A 0 BJS8 A 0 EV BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8.8 A 8 BJE8.9 A 9 BJE8.0 A 0 BJB BJP8 ()() 0 A EL () A AD, A D BP8.A CE.8 CEE (with AL) Each screw-clamp holds bent lugs, as above (not supplied), for connection of wires : 0,8 to, mm² / to, mm² A =, to, for size,9 to, for size TM C 80 CAL8 09 09.0 0 0. 0.00 0 0. 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 0 9. 0 0. 0.00 0.0 0.0 0 89.0 08 0. 099.0 099.0 099.0 099.00 099.0 099.0 099 8. 099 9. 099 0. 0 8.0 0. 0 0.0 00 8.0 0 888.0 099 8. 099. () 00 V () rated voltage with these accessories. () Forbidden under explosive atmosphere EEX usage. () Only certified for "i" security. () See "Notes". Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

ado MINI BLOCKS A reduced size range Numerous mounting options DIN ail Plate A very legible marking mini blocks use the same marking technique as standard ENTELEC terminals, located on the top of the block. MINI BLOCKS ASSEMBLY AND ACCESSOIES ail mounted DIN and DIN : Panel mounted with snap in mounting foot : DIN : DS... DIN : D... Snap in : DH... At the end of the terminal blocks assembly : - End section : (same accessory for any type of terminal block assembly) FEAD : V/ End section to be mounted directly on FEAD : / the open part of the terminal block. - End terminal block : DE... (DIN) This terminal block has to be mounted at DSE... (DIN) the end of the terminal blocks assembly : it reduces its size, because it suppresses the insulation rib (- mm). Note : This terminal block cannot be accidentally located anywhere else into the terminal block assembly (without locking holes). With screw mounting kit : DB... In the terminal blocks assembly : - Separator : (same accessory for any type of terminal block assembly) FEAD : V/ Accessory which snaps on the terminal FEAD : / blocks, separates and makes visible the different parts of the terminal blocks assembly. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - clamp DIN DS,/. Spacing mm +0,0.98" side,." side 0, -, mm²." 0, - mm² - AWG - 0 AWG.9",.9" DS /. Spacing mm +0,0.8" side side 0, -, mm² 0, - mm² - AWG - 0 AWG 0,.8" DS (with rib) DSE (without rib only for T.B assembly extremity.9 End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Observations Standard blocks and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. 0 9 8 End section grey orange Separator grey orange Test device yellow blue Test plug less jumper bar to be inserted into jaw orange IP0 Comb-type jumper bar Insulating tip Hand tool kit 8 Semi-automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector Colour Part numbers Blue Orange Standed Standed / Gauge 0, - mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 800 V 00 V 8 kv, A 0 A mm² 8 AWG 9, mm, mm 0,-0, Nm IP 0.".".-. ib.in NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCB FC DIA. mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC 0 A PC 0 A 0 EIP D CE. CEE DS,/. DS,/.N. DS,/. DSE,/. 099. 099. 099. 099 8.0 Wire stripping ecommended ecommended Protection 099. 099. 099. 099. 00 08. 000 8. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 0.0 0. 0 0. 00 8.0 099. 099. Colour Part numbers Blue Orange Standed Standed DS /. DS /.N. DS /. DSE /. FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ FC DIA. mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC A PC A PC A PC A 0 EIP D CE. CEE 099 89.0 099 9. 099 90.0 099.0 0, - mm² -0 AWG 0,- mm² -0 AWG 0,8-, mm² - AWG 0,-, mm² - AWG 800 V 00 V, A 0 A / Gauge, mm² -0 AWG Wire stripping ecommended ecommended Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. ib.in NEMA P/N 099. 099. 099. 099. 0 09.0 000 8. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0.0 0.0 0 8. 0 0. 00 8.0 099. 099. See section on markers marking method On top of block C On top of block C Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement DS /8. DS /8.A. Spacing 8 mm +0,0." side side Spacing 8 mm +0,0.8" side side -, mm² 0, - mm² mm² 0, - mm² - AWG - 0 AWG AWG - AWG - clamp DIN DS (with rib) DSE (without rib only for T.B assembly extremity) End stop th. 9 mm BADL V0 End stop th. 0 mm BAM V End stop th. 0 mm BAM V0 V0 ail x, x P.Z ail x x, P ail x x, P Other end stops, rails and accessories : see section on accessories. Observations Terminal block body material is UL 9 V0. DS /8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). DS /8.A. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. End section grey orange Separator grey orange Test device yellow Test plug Comb-type jumper bar IDC jumper Hand tool kit 8 Semi automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector 099 90.0 00. 099 9.0 0 00. 08 00. 08 00. Colour Part numbers Blue Orange Standed Standed / Gauge DS /8. DS /8.N. DS /8. DSE /8. 0, - mm² -0 AWG 0,- mm² -0 AWG -, mm² - AWG -, mm² - AWG 000 V 00 V 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA P/N FEAD V0 th., mm 099. FEAD V0 th., mm 099. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. DCJ V 0 09.0 FC DIA. mm 000 8. PC8 V 0 A 0 8. PC8 V 0 A 0 9.0 PC8 V 0 A 0 0. PC8 V 0 A 0 0. D CE.8 CEE 099 9. 099 9. 099 9. 099.0 A A, mm² -0 AWG Wire stripping ecommended ecommended Protection 00 8.0 099 8. 099. Colour Part numbers Blue Orange Standed Standed DS /8.A. DS /8.A.N. DS /8.A. DSE /8.A. 0, - mm² - AWG 0,- mm² - AWG mm² AWG mm² AWG 000 V A / Gauge mm² AWG Wire stripping ecommended ecommended Protection 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm PC8 V 0 A PC8 V 0 A PC8 V 0 A PC8 V 0 A 0 AD, V D 099 9.0 099.0 099 0.0 099. 099. 099. 099. 099. 0 09.0 000 8. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 0 8 9 See section on markers marking method On top of block CAL8 On top of block CAL8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - clamp for ground terminal blocks not electrically connected to the mounting rail DIN DS,/.PI. Spacing mm +0,0.98" side side 0, - mm² 0, -, mm² - 8 AWG - AWG,.".".9",.9" DS /.PI. Spacing mm +0,0.8" side side 0, -, mm² 0, - mm² - AWG - 0 AWG DS /8.PI. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG 0,.8".9 Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange Yellow body / green marking DS,/.PI. 099. 0, - mm² - AWG 0, -, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A/ s. mm² 8 AWG Wire strip. ecomm. ecomm. Protection 9, mm, mm 0,-0, Nm IP0.".".-. lb.in NEMA FEAD V0 th., mm FEAD V0 th., mm P/N Yellow body / green marking NFC DS /.PI. 099 9. DS /8.PI. 099 9. DIN 0, - mm² -0 AWG 0, - mm² -0 AWG 0,8-, mm² - AWG 0,-, mm² - AWG 80 A/ s., mm² -0 AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP0."." -. lb.in NEMA FEAD V0 th., mm FEAD V0 th., mm P/N Yellow body / green marking 0, - mm² -0 AWG 0, - mm² -0 AWG -, mm² - AWG -, mm² - AWG 00 A/ s. Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP0."." -. lb.in NEMA P/N P/N P/N 099. 099. 099. 099. FEAD V0 th., mm FEAD V0 th., mm P/N 099. 099. See section on markers mode On top C On top C On top C8 Miniblocks Displacement - clamp for ground terminal blocks not electrically connected to the mounting rail DIN DS /8.A.PI. Spacing 8 mm +0,0." side side mm² / AWG 0, - mm² wire only - AWG Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange P/N P/N P/N Yellow body / green marking DS /8.A.PI. 099. 0, - mm² - AWG 0, - mm² - AWG mm² AWG mm² AWG 80 A/ s. mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,8-0,8 Nm IP0."." -. lb.in NEMA FEAD V0 th., mm FEAD V0 th., mm Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection P/N P/N P/N 099. 099. See section on markers mode On top CAL8 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - clamp for ground terminal blocks electrically connected to the mounting rail DIN DS /8.P. Spacing 8 mm +0,0." side side -, mm² 0, - mm² - AWG - 0 AWG DS /8.A.P. Spacing 8 mm +0,0." side side mm² / AWG 0, - mm² wire only - AWG Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing current short-circuit wire size nominal / gauge Other characteristics Approvals Green body / yellow marking Green body / yellow marking DS /8.P. 099.0 DS /8.A.P. 099.0 NFC DIN P/N 0,- mm² -0 AWG 0,- mm² -0 AWG -, mm² - AWG -, mm² - AWG 00 A / s., mm² -0 AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP0."." -. lb.in NEMA NFC DIN P/N 0,- mm² - AWG 0,- mm² - AWG mm² AWG mm² AWG 80 A/ s. mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP0."." -. lb.in NEMA P/N P/N 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - clamp DIN D,/. Spacing mm +0,0 (.98") side." side 0, - mm² 0, -, mm² - 8 AWG - AWG,." D /. Spacing mm +0,0.8" side side 0, -, mm² 0, - mm² - AWG - 0 AWG,." D (with rib) DE (without rib only for T.B assembly extremity.9 Colour Part numbers Colour Part numbers Blue Orange D,/. D,/.N. D,/. DE,/. 099 09. 099.0 099 0.0 099. Blue Orange D /. D /.N. D /. DE /. 099.0 099.0 099.0 099.0 End stop th., mm BADL V0 099 0. ail x x P 0 00. Other end stops, rails and accessories : see section on accessories. Notes Standard blocks, and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. 8 9 End section grey orange Separator grey orange Test device blue Test plug less jumper bar orange IP0 Comb-type jumper bar tip IDC jumper 8 Hand tool kit 9 Semi automatic tool 0 Pneumatic tool kit eplacement head kit Extraction tool kit Test connector 0, - mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 800 V 00 V 8 kv, A 0 A / Gauge mm² 8 AWG Wire stripping ecommended ecommended protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCB FC DIA. mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC 0 A PC 0 A 0 EIP V AD, V D CE. CEE 099. 099. 099. 099. 00 08. 000 8. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 0.0 0. 0 0. 0 0.0 00 8.0 099. 099. 0, - mm² -0 AWG 0,- mm² -0 AWG 0,8-, mm² - AWG 0,-, mm² - AWG 800 V 00 V 8 kv, A 0 A / Gauge, mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC V A PC V A PC V A PC V A 0 EIP V AD, V D CE. CEE P/N 099. 099. 099. 099. 0 09.0 000 8. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0.0 0.0 0 8. 0 0. 0 0.0 00 8.0 099. 099. 0 See section on markers marking method On top C On top C Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - clamp DIN D /8. D /8.A. Spacing 8 mm +0,0." side side Spacing 8 mm +0,0.8" side side -, mm² 0, - mm² mm² 0, - mm² - AWG - 0 AWG AWG - 0 AWG D (with rib) End stop th., mm BADL V0 099 0. ail x x P 0 00. Other end stops, rails and accessories : see section on accessories. Observations Terminal block body material is UL 9 V0. D /8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). D /8.A. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. End section grey orange Separator grey orange Test device yellow Test plug Comb-type jumper bar IDC jumper Hand tool kit 8 Semi automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector Colour Part numbers Blue Orange D /8. D /8.N. D /8. DE /8. 0,- mm² -0 AWG 0,- mm² -0 AWG -, mm² - AWG -, mm² - AWG A A / Gauge, mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm PC8 V 0 A PC8 V 0 A PC8 V 0 A PC8 V 0 A 0 AD, V D CE.8 CEE 099 9. 099 8. 099 80.0 099.0 000 V 00 V 8 kv 099. 099. 099. 099. 0 09.0 000 8. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 099 8. 099. Colour Part numbers Blue Orange D /8.A. D /8.A.N. D /8.A. DE /8.A. 0,- mm² -0 AWG 0,- mm² -0 AWG mm² AWG mm² AWG 000 V A / Gauge mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm PC8 V 0 A PC8 V 0 A PC8 V 0 A PC8 V 0 A 0 AD, V D 099. 099. 099. 099 8.0 P/N 099. 099. 099. 099. 0 09.0 000 8. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 0 8 9 See section on markers marking method On top CAL8 On top CAL8 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - clamp for ground terminal blocks not electrically connected to the mounting rail DIN D,/.PI. D /.PI. D /8.PI. Spacing mm +0,0 (.98") side side Spacing mm +0,0 (.8") side side Spacing 8 mm +0,0 (.") side side 0, - mm² 0, -, mm² 0, -, mm² 0, - mm² -, mm² 0, - mm² - 8 AWG." - AWG - AWG - 0 AWG - AWG - 0 AWG,.",.".9 s screw side and other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange Part number Yellow body / Green marking D,/.PI. 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A / s. mm² 8 AWG Wire strip. ecomm. ecomm. Protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA FEAD V0 th., mm FEAD V0 th., mm 099. Part number Yellow body / Green marking D /.PI. 0,- mm² -0 AWG 0,- mm² -0 AWG 0,8-, mm² - AWG 0,-, mm² - AWG 80 A/ s., mm² AWG Wire strip. ecomm. ecomm. Protection 0 mm mm 0,-0,8 Nm IP 0.9".".-. lb.in NEMA FEAD V0 th., mm 099. FEAD V0 th., mm 099. Part number Yellow body / Green marking 099 8. D /8.PI. 099 8. 0,- mm² -0 AWG 0,- mm² -0 AWG -, mm² - AWG -, mm² - AWG 00 A/ s., mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part number Part number Part number 099. 099. FEAD V0 th., mm 099. FEAD V0 th., mm 099. See section on markers mode On top C On top C On top CAL8 Miniblocks Displacement - clamp for ground terminal blocks not electrically connected to the mounting rail DIN D /8.A.PI. Spacing 8 mm +0,0 (.") side side mm² / AWG 0, - mm² wire only - AWG s screw side and other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange See section on markers mode Part number Part number Part number Yellow body / Green marking D /8.A.PI. 0,- mm² - AWG 0,- mm² - AWG mm² AWG mm² AWG 80 A/ s. mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEAD V0 th., mm FEAD V0 th., mm CAL8 099. Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection Part number Part number Part number 099. 099. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - clamp for ground terminal blocks electrically connected to the mounting rail DIN D /8.P. D /8.A.P. Spacing 8 mm +0,0 (.") side side Spacing 8 mm +0,0 (.") side side -, mm² 0, - mm² mm² / AWG 0, - mm² - AWG - 0 AWG wire only - AWG Other accessories of this terminal blocks: see pages of same size standard blocks. current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange Part number Part number Part number Green body / Yellow marking Green body / Yellow marking D /8.P. 099.0 D /8.A.P. 099.0 0,- mm² -0 AWG 0,- mm² - AWG 0,- mm² -0 AWG 0,- mm² - AWG -, mm² - AWG mm² AWG -, mm² - AWG mm² AWG 00 A / s. 80 A/ s., mm² AWG mm² AWG Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in.".".-. lb.in NEMA Part number Part number Part number FEAD V0 th., mm 099. FEAD V0 th., mm 099. FEAD V0 th., mm 099. FEAD V0 th., mm 099. See section on markers mode On top CAL8 On top CAL8 Part number Part number Part number current short-circuit wire size nominal / gauge Other characteristics UL CSA Wire strip. ecomm. ecomm. Protection UL CSA Wire strip. ecomm. ecomm. Protection UL CSA Wire strip. ecomm. ecomm. Protection Approvals Part number Part number Part number Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - clamp Base mount with flanges DB,/. Spacing mm + 0,0.9" side side 0, - mm² 0, -, mm² - 8 AWG." - AWG 8.0" DB /. Spacing mm + 0,0.8" side side 0, -, mm² 0, - mm² - AWG - 0 AWG.9 Colour Part numbers Blue Orange DB,/. DB,/.N. DB,/. 099 9.00 099. 099 0.0 Colour Part numbers Blue Orange DB /. DB /.N. DB /. 099 0.0 099 0.0 099 0.00 For drilling patterns see page: assembly and accessories Observations Standard blocks, and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. 8 9 End section grey (left+ right) orange Separator grey orange Test device blue Test plug less jumper bar to be inserted into jaw orange IP0 Comb-type jumper bar Insulating tip IDC jumper 8 Hand tool kit 9 Semi automatic tool 0 Pneumatic tool kit eplacement head kit Extraction tool kit Test connector 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 800 V 00 V 8 kv, A 0 A / Gauge mm² 8 AWG Wire stripping ecommended ecommended protection 9, mm, mm 0, - 0, Nm IP 0.".".-. ib.in NEMA P/N FEAD V0 099. FEAD V0 099 8. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. DCB 00 08. FC DIA. mm 000 8. BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 98. BJ.0, A 0 00 9.0 BJ.0, A 0 00 9.0 PC 0 A 0.0 PC 0 A 0 EIP V AD, V A D CE. CEE 0. 0 0. 0 0.0 00 8.0 099. 099. 0,- mm² -0 AWG 0,- mm² -0 AWG 0,8-, mm² - AWG 0,-, mm² - AWG 800 V 00 V 8 kv, A 0 A / Gauge, mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".".-. ib.in NEMA FEAD V0 FEAD V0 FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC V A PC V A PC V A PC V A 0 EIP V AD, V A D CE. CEE P/N 099. 099 8. 099. 099. 0 09.0 000 8. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0.0 0.0 0 8. 0 0. 0 0.0 00 8.0 099. 099. 0 See section on markers marking method On top C On top C Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - clamp Base mount with flanges DB /8. Spacing 8 mm + 0,0." side side -, mm² 0, - mm² - AWG - 0 AWG DB /8.A. Spacing 8 mm +0,0.8" side side mm² 0, - mm² AWG - AWG Colour Part numbers Blue Orange DB /8. DB /8.N. DB /8. 099 09. 099. 099 0.0 Colour Part numbers Blue Orange DB /8.A. DB /8.A.N. DB /8.A. 099. 099. 099. For drilling patterns see page: assembly and accessories Observations Terminal block body material is UL 9 V0. DB /8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). DB /8.A. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. 0,- mm² -0 AWG 0,- mm² -0 AWG -, mm² - AWG -, mm² - AWG 800 V 00 V 8 kv A A / Gauge, mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA P/N End section grey FEAD V0 (left+ right) orange FEAD V0 Separator grey FEAD V0 th.,0 mm orange FEAD V0 th.,0 mm Test device yellow DCJ V Test plug FC DIA. mm Comb-type jumper bar PC8 V 0 A PC8 V 0 A PC8 V 0 A PC8 V 0 A 0 IDC jumper AD, V A Hand tool kit 8 Semi automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector D CE.8 CEE 099. 099 8. 099. 099. 0 09.0 000 8. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 099 8. 099. 0,- mm² - AWG 0,- mm² - AWG mm² AWG mm² AWG 000 V A / Gauge mm² Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA FEAD V0 FEAD V0 FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm PC8 V 0 A PC8 V 0 A PC8 V 0 A PC8 V 0 A 0 AD, V A D P/N 099. 099 8. 099. 099. 0 09.0 000 8. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 0 8 9 See section on markers marking method On top CAL8 On top CAL8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - clamp for ground terminal blocks not electrically connected to the mounting plate Base mount with flanges in mounting foot DB,/.PI. 8.0" DB /.PI. DB /8.PI. Spacing mm + 0,0 (.98") Spacing mm + 0,0 (.8") Spacing 8 mm + 0,0 (.") side side side side side side 0, - mm² 0, -, mm² 0, -, mm² 0, - mm² -, mm² 0, - mm² - 8 AWG - AWG - AWG - 0 AWG - AWG - 0 AWG.".9 Other accessories of this terminal blocks: see pages of same size standard blocks. Part number Yellow body / Green marking DB,/.PI. 099. Part number Part number Yellow body / Green marking Yellow body / Green marking DB /.PI. 099 08. DB /8.PI. 099. current short-circuit wire size nominal / gauge Other characteristics Approvals End section kit with flanges grey (left + right) orange 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A/ s. mm² 8 AWG Wire strip. ecomm. ecomm. Protection 9, mm, mm 0,-0, Nm IP 0.".".-. Ib.in NEMA FEAD FEAD V0 V0 0,- mm² -0 AWG 0,- mm² -0 AWG 0,8 -, mm² - AWG 0,-, mm² - AWG 80 A/ s., mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. Ib.in NEMA FEAD FEAD V0 V0 0,- mm² -0 AWG 0,- mm² -0 AWG -, mm² - AWG -, mm² - AWG 00 A/ s., mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. Ib.in NEMA Part number Part number Part number 099. 099 8. 099. 099 8. FEAD FEAD V0 V0 099. 099 8. See section on markers mode On top C On top C On top CAL8 Miniblocks Displacement - clamp for ground terminal blocks not electrically connected to the mounting plate Base mount with flanges in mounting foot DB /8.A.PI. Spacing 8 mm + 0,0 (.") side side mm² / AWG 0, - mm² wire only - AWG Other accessories of this terminal blocks: see pages of same size standard blocks. current short-circuit wire size nominal / gauge Other characteristics Approvals End section kit with flanges grey (left + right) orange Part number Part number Part number Yellow body / Green marking DB /8.A.PI. 099. 0,- mm² - AWG 0,- mm² - AWG mm² AWG mm² AWG 80 A/ s. mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. Ib.in NEMA FEAD FEAD V0 V0 Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection Part number Part number Part number 099. 099 8. See section on markers mode On top CAL8 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - clamp Base mount with snap in mounting foot DH,/. Spacing mm + 0,0 (.98") side side 0, - mm² 0, -, mm²." - 8 AWG - AWG 8.0" DH /. Spacing mm + 0,0 (.8") side side 0, -, mm² 0, - mm² - AWG - 0 AWG.9 Colour Part numbers Colour Part numbers Blue Orange DH,/. DH,/.N. DH,/. 099. 099. 099. Blue Orange DH /. DH /.N. DH /. 099. 099.0 099. For drilling pattern see page: assembly and accessories Observations Standard blocks, and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. 8 9 End section grey orange Separator grey orange Test device yellow Test plug less jumper bar to be inserted into jaw orange IP0 Comb-type jumper bar Insulating tip IDC jumper 8 Hand tool kit 9 Semi automatic tool 0 Pneumatic tool kit eplacement head kit Extraction tool kit Test connector 0,- mm² - AWG 0,-, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 800 V 00 V 8 kv, A 0 A / Gauge mm² 8 AWG Wire stripping ecommended ecommended protection 9, mm, mm 0, - 0, Nm IP 0.".".-. ib.in NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCB V FC DIA. mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC 0 A PC 0 A 0 EIP V AD, V A D CE. CEE 099. 099. 099. 099. 0 09.0 000 8. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 0.0 0. 0 0. 0 0.0 00 8.0 099. 099. 0,- mm² -0 AWG 0,- mm² -0 AWG 0,8-, mm² - AWG 0,-, mm² - AWG, A 0 A / Gauge, mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".".-. ib.in NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 PC V A PC V A PC V A PC V A 0 EIP V AD, V A D CE. CEE 800 V 00 V 8 kv P/N 099. 099. 099. 099. 0 09.0 000 8. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0.0 0.0 0 8. 0 0. 0 0.0 00 8.0 099. 099. 0 See section on markers marking method On top C On top C Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - clamp Base mount with snap in mounting foot DH /8. Spacing 8 mm + 0,0 (.") side side -, mm² 0, - mm² - AWG - 0 AWG DH /8.A. Spacing 8 mm +0,0.8" side side mm² 0, - mm² AWG - AWG Colour Part numbers Blue Orange DH /8. DH /8.N. DH /8. 099. 099. 099. Colour Part numbers Blue Orange DH /8.A. DH /8.A.N. DH /8.A. 099 8.0 099 0. 099 9.00 For drilling pattern see page: assembly and accessories Observations Terminal block body material is UL 9 V0. DH /8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). DH /8.A. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. End section grey orange Separator grey orange Test device yellow Test plug Comb-type jumper bar IDC jumper Hand tool kit 8 Semi automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector 0,- mm² -0 AWG 0,- mm² -0 AWG -, mm² - AWG -, mm² - AWG 800 V 00 V 8 kv A A / Gauge, mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm PC8 V 0 A PC8 V 0 A PC8 V 0 A PC8 V 0 A 0 AD, D CE.8 CEE V A 099. 099. 099. 099. 0 09.0 000 8. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 099 8. 099. 0,- mm² - AWG 0,- mm² - AWG mm² AWG mm² AWG 000 V A / Gauge mm² AWG Wire stripping ecommended ecommended protection 9, mm mm 0, - 0,8 Nm IP 0.".". -. Ib.in NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm DCJ V FC DIA. mm PC8 V 0 A PC8 V 0 A PC8 V 0 A PC8 V 0 A 0 AD, D V A P/N 099. 099. 099. 099. 0 09.0 000 8. 0 8. 0 9.0 0 0. 0. 0 0.0 00 8.0 0 8 9 See section on markers marking method On top CAL8 On top CAL8 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - clamp ground terminal blocks not electrically connected to the mounting plate Base mount with snap in mounting foot DH,/.PI. 8.0".9 DH /.PI. Spacing mm +0,0 (.98") Spacing mm +0,0 (.8") side side side 0, - mm² 0, -, mm² - 8 AWG." - AWG side 0, -, mm² 0, - mm² - AWG - 0 AWG DH /8.PI. Spacing 8 mm +0,0 (.") side side -, mm² 0, - mm² - AWG - 0 AWG Other accessories of this terminal blocks: see pages of same size standard blocks. Part number Yellow body / Green marking DH,/.PI. 099. Part number Part number Yellow body / Green marking Yellow body / Green marking DH /.PI. 099. DH /8.PI. 099 8.0 current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange 0, - mm² - AWG 0, -, mm² - AWG 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A / s. mm² 8 AWG Wire strip. ecomm. ecomm. Protection 9, mm, mm 0,-0, Nm IP 0.".".-. lb.in NEMA FEAD V0 th., mm 099. FEAD V0 th., mm 099. 0, - mm² -0 AWG 0, - mm² -0 AWG 0,8-, mm² - AWG 0,-, mm² - AWG 80 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEAD V0 th., mm 099. FEAD V0 th., mm 099. 0, - mm² -0 AWG 0, - mm² -0 AWG -, mm² - AWG -, mm² - AWG 00 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA Part number Part number Part number FEAD V0 th., mm 099. FEAD V0 th., mm 099. See section on markers mode On top C On top C On top CAL8 Miniblocks Displacement - clamp ground terminal blocks not electrically connected to the mounting plate Base mount with snap in mounting foot DH /8.A.PI. Spacing 8 mm +0,0 (.") side side mm² / AWG 0, - mm² wire only - AWG Other accessories of this terminal blocks: see pages of same size standard blocks. Part number Part number Part number Yellow body / Green marking DH /8.A.PI. 099.0 current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange 0, - mm² - AWG 0, - mm² - AWG mm² AWG mm² AWG 80 A / s. mm² AWG Wire strip. ecomm. ecomm. Protection 9, mm mm 0,-0,8 Nm IP 0.".".-. lb.in NEMA FEAD V0 th., mm 099. FEAD V0 th., mm 099. NFC DIN Wire strip. ecomm. ecomm. Protection NFC DIN Wire strip. ecomm. ecomm. Protection Part number Part number Part number See section on markers mode On top CAL8 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks displacement - DIN wire size 0. - mm² - 8 AWG D /. Spacing mm +0.0.98",.9".0" 8,.9" Color Part number Standard blocks Orange Blue Black ed Ivory Yellow Green D /. D /. D /.N. D /. D /. D /. D /. D /. 099. 099. 099. 099. 099.0 099 8.0 099 9.0 099 0.0.9" Standard mm block 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Sranded wire 0,- mm² -8 AWG 0,- mm² -8 AWG 000 V 00 V 8 kv, A A mm² 8 AWG NEMA WIre stripping ecommanded ecommanded length (screw) (screw) torque (screw) Protection Notes IP 0 Standard block mm spacing. For multiple wires connections, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part number 0 End section grey yellow Circuit separator grey Test socket Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer 8 less jumper bar orange IP0 9 Jumper bar 0 less jumper bar to be inserted into jaw orange IP0 Shield connector Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit Test connector See section on markers marking method FEMAD th. mm 099.0 FEMAD SCAD AL () th. mm DIA. mm 099.0 099.0 0 0. FC DIA. mm 000 8. BJM () A 0.0 BJM () A 0.0 BJM () A 0.0 BJM () A 0.0 BJM () A 0 0.0 BJMI () A 0 8. BJMI () A 0 9. BJMI () A 0 80.0 BJMI () A 0 8. BJMI () A 0 0 8. BJS () A 0 0.0 EV BJE. 0 A 08 9. 099. BJE. 0 A 099 8.0 BJE. 0 A 099 98.0 BJE. 0 A 099 99.0 BJE. 0 A 099 8.0 BJE. 0 A 099 8.0 BJE.8 0 A 8 099 8.0 BJE.9 0 A 9 099 8.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CBM CBM8 D CE. CEE th. 0. mm th. 0.8 mm 00 9.0 00 98. 00 9.0 00 9.0 08. 08. 00 8.0 099. 099. C C0 TM () SC and 00 V () rated voltage required with these accessories. Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement - DIN wire size 0, - mm² - 8 AWG Spacing mm +0,0.98" D /.. Colour Part number Standard blocks D /.. 099. D /. with partition 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Pollution degres 0,- mm² -8 AWG 0,- mm² -8 AWG 000 V 00 V 8 kv, A A mm² 8 AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection IP 0 NEMA Notes Standard block mm spacing. For multiple wires connections, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part number 9 0 End section grey yellow Test socket Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer less jumper bar orange IP0 8 Jumper bar 9 less jumper bar to be inserted into jaw orange IP0 0 Shield connector Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head lit Extraction tool kit Test connector FEMAD th. mm FEMAD th. mm AL DIA. mm FC DIA. mm BJM () A BJM () A BJM () A BJM () A BJM () A 0 BJMI () A BJMI () A BJMI () A BJMI () A BJMI () A 0 BJS () A 0 EV () BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE. () 0 A BJE.8 () 0 A 8 BJE.9 () 0 A 9 BJE.0 () 0 A 0 BJB BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CBM th. 0, mm CBM8 th. 0,8 mm D CE. CEE 099.0 099.0 0 0. 000 8. 0.0 0.0 0.0 0.0 0.0 0 8. 0 9. 0 80.0 0 8. 0 8. 0.0 08 9. 099. 099 8.0 099 98.0 099 99.0 099 8.0 099 8.0 099 8.0 099 8.0 099. 099. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 08. 08. 00 8.0 099. 099. See section on markers marking method C C0 TM () Use of these accessories requires the user to cut out the partition. 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Notes Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement - DIN wire size 0, -, mm² - AWG Spacing mm +0,0.00" D,/.... Colour Part number Standard blocks Orange Blue Black ed Ivory Yellow Green D,/. D,/.N. D,/. D,/. D,/. D,/. D,/. 099 0. 099 0.0 099 08. 099 08. 099 08. 099 080.0 099 0. 099 0. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. UL CSA 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 000 V 00 V 00 V 8 kv, A 8 A 8 A, mm² AWG AWG Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection IP 0 NEMA Notes Standard block mm spacing. For multiple wires connections, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part number 0 0 9 8 End section grey yellow Circuit separator Test socket Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer 8 less jumper bar orange IP0 9 Jumper bar 0 less jumper bar to be inserted into jaw orange IP0 Pivoting jumper bar Jumper bar for alternated jumping Universal jumper bar Connector plate Shield connector Protection label for protection label Hand tool kit 8 Semi-automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit Test connector FEMAD th. mm FEMAD th. mm SCAD AL () DIA. mm AL () DIA. mm FC DIA. mm FC DIA. mm BJM () A BJM () A BJM () A BJM () A BJM () A 0 BJMI () A BJMI () A BJMI () A BJMI () A BJMI () A 0 BJS () A 0 EV BJE. A BJE. A BJE. A BJE. A BJE. A BJE. A BJE.8 A 8 BJE.9 A 9 BJE.0 A 0 BJB BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 BJP () A BJA ()V A 0 BJDP () () 0 A spac. <->spac. BJDP () () 0 A spac. <->spac. BJDP () () 0 A sp. <->sp. 8 or 0 EL A CBM th. 0, mm CBM8 th. 0,8 mm EP V blocks VSP V D CE. CEE 099.0 099.0 09 89.00 0 0. 0.00 000 8. 0 80.0 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 09.0 09.0 0 8. 0. 08. 08. 0. 0. 00 8.0 099. 099. See section on markers marking method C C0 TM () SC and 00 V () rated voltage are required with the use of these accessories. () Use of these accessories requires the user to cut out the partition. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

D,/.. D,/.. D,/.. D,/..C Spacing mm +0,0.8" Spacing mm +0,0.8" Spacing mm +0,0.8" Spacing mm +0,0.8" 099 0. 099 0. 099 090. 099 08. D,/. with partition D,/.. equipped with DIA. mm test socket for test D,/.. equipped with DIA. mm test socket for test D,/.. equipped with DIA., mm flexible test socket for connector - () Part numbers Part numbers 099.0 Part numbers 099.0 Part numbers 099.0 Part numbers 099.0 Various applications () () () () () () () () () () () () 0 0. 0.00 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 000 8. 0 80.0 () () ()() ()() ()() () 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 09.0 09.0 0 8. 0. 08. 08. 0. 0. 00 8.0 099. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 08. 08. 00 8.0 099. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 08. 08. 00 8.0 099. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 08. 08. 00 8.0 099. 099. D,/..C terminal blocks equipped with DIA., mm test socket receive a connector. voltage : 800 V ( ) voltage : 800 V ( ) BJDP is used for the interconnection with terminal block series "M": spacing mm. BJDP is used for the interconnection with terminal block series "M": spacing mm. BJDP is used for the interconnection with terminal block series "D": spacing 8 mm. or terminal block series "M": spacing 8 or 0 mm. C C0 TM C C0 TM C C0 TM C C0 TM () See column : "Various applications". () Use of these accessories requires the user to cut out the partition. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement - DIN wire size -, mm² - AWG Spacing 8 mm +0,0." D,/8.... Colour Part Number Standard blocks Orange Blue Black ed Ivory Yellow Green D,/8. D,/8.N. D,/8. D,/8. D,/8. D,/8. D,/8. 099 00.0 099 0.0 099 089. 099 08. 099 088. 099 09.0 099 8.0 099 09.0 End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. -, mm² - AWG - AWG -, mm² - AWG - AWG 000 V 00 V 00 V 8 kv A A A, mm² AWG AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection Notes UL CSA IP 0 NEMA Standard block 8 mm spacing. For multiple wires connections, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. Part Number 0 9 8 End section grey Circuit separator grey Test socket Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer 8 less jumper bar orange IP0 9 Jumper bar 0 Pivoting jumper bar Universal jumper bar Connector plate Protecting label for protecting label Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit 8 Extraction head kit 9 Test connector FEMAD th. mm SCAD AL () DIA. mm AL () DIA. mm AL () DIA. mm FC DIA. mm FC DIA. mm BJM8 () A BJM8 () A BJM8 () A BJM8 () A BJM8 () A 0 BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A 0 BJS8 () A 0 EV BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8.8 A 8 BJE8.9 A 9 BJE8.0 A 0 BJB BJP8 () 0 A BJDP () () 0 A spacing 8<->spacing BJDP () () 0 A spacing 8<->spacing BJDP () () 0 A spacing 8<->spacing 0 EL A EP V blocks EP8 V blocks VSP V D CE.8 CEE 099.0 09 89.00 0 0. 0.0 0 0. 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 0 9. 0 0. 0.00 0.0 0.0 0 89.0 08 0. 099.0 099.0 099.0 099.00 099.0 099.0 099 8. 099 9. 099 0. 099. 0 8.0 09.0 09.0 0 8. 0. 0. 0 8.0 0. 00 8.0 099 8. 099. * Black marking for wire size -, mm² ( - AWG) See section on markers marking method TM C80 CAL8 () SC and 00 V () rated voltage required with these accessories. () See column : "Various applications". Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

D,/8.. D,/8.. D,/8.. D,/8..C Spacing 8 mm +0,0." Spacing 8 mm +0,0." Spacing 8 mm +0,0." Spacing 8 mm +0,0." 099 0. 099 0.0 099. 099. D,/8. with partition D,/8.. equipped with DIA. mm test socket for test D,/8.. equipped with DIA. mm test socket for test D,/8.. equipped with DIA., mm flexible test socket for connector - () Part numbers Part numbers Part numbers Part numbers Various applications 099.0 099.0 099.0 099.0 V V () () () () () V() V() V() V() V() () () 0 0. 0.0 0 0. 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 0 9. 0 0. 0.00 0.0 0.0 0 89.0 08 0. V 000 8. V 0 80.0 () ()() ()() ()() () V V V 0 8.0 09.0 09.0 0 8. 0. 0. 0 8.0 0. 00 8.0 099 8. 099. 00 8.0 099 8. 099. 00 8.0 099 8. 099. 00 8.0 099 8. 099. D,/8..C terminal blocks equipped with DIA., mm test socket receive a connector. See general catalog "connexion". voltage: 800 V ( ) voltage: 800 V ( ) BJDP is used for the interconnection with terminal block series "M": spacing mm. BJDP is used for the interconnection with terminal block series "M": spacing mm. TM C80 CAL8 TM C80 CAL8 TM C80 CAL8 TM C80 CAL8 BJDP is used for the interconnection with terminal block series "M": spacing 0 mm. () See column : "Various applications". () Use of these accessories requires the user to cut out the partition. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement - DIN wire size mm² AWG Spacing 8 mm +0,0." D /8. Colour Part number Standard blocks Blue Orange D /8. D /8.N. D /8. 099. 099 8. 099 80.0 Standard 8 mm block 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. mm² AWG mm² AWG 000 V 00 V 8 kv A A mm² AWG NEMA Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection Notes IP 0 Standard 8 mm block for connection of only one solid or stranded mm² wire. Part numbers 0 End section grey Circuit separator grey Test socket Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer 8 less jumper bar orange IP0 9 Jumper bar 0 Pivoting jumper bar Universal jumper bar Connector plate Protection label for protection label Hand tool kit Semi-automatic tool eplacement head kit Extraction tool kit grey grey FEMAD th. mm SCAD AL () DIA. mm AL () DIA. mm AL () DIA. mm FC () DIA. mm FC () DIA. mm BJM8 () A BJM8 () A BJM8 () A BJM8 () A BJM8 () A 0 BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A BJMI8 () A 0 BJS8 A 0 EV BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8. A BJE8.8 A 8 BJE8.9 A 9 BJE8.0 A 0 BJB BJP8 ()() 0 A BJDP ()() 0 A spacing 8<->spacing BJDP ()() 0 A spacing 8<->spacing BJDP ()() 0 A spacing 8<->spacing 0 EL () A EP blocks EP8 blocks VSP 099.0 09 89.00 0 0. 0.0 0 0. 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 0 9. 0 0. 0.00 0.0 0.0 0 89.0 08 0. 099.0 099.0 099.0 099.00 099.0 099.0 099 8. 099 9. 099 0. 099. 0 8.0 09.0 09.0 0 8. 0. 0. 0 8.0 0. 00 8.0 () BJDP is used for the interconnection with terminal block series "M". spacing mm. BJDP is used for the interconnection with terminal block series "M" : spacing mm. BJDP is used for the interconnection with terminal block series "M" : spacing 0 mm. See section on markers marking method TM C 80 CAL8 * White marking for wire size mm² ( AWG) () A circuit separator SC and 00 V () rated voltage are required with these accessories. () Forbidden under explosive atmosphere EEX usage. () Only certified for "i" security. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks displacement Double deck - DIN wire size 0. - mm² - AWG D /.D. Spacing mm +.0 (.00") end section Color Part number Standard block D /.D. 099 89. Blue D /.D.N. 099 89. Double deck terminal block spacing mm 099 89. End stop th. mm BADH V 0 900. End stop th. 9. mm BAMH V 0 8.00 End stop th. 9. mm BAMH V0 V0 09 8.0 ail x. x P.Z 0 00. ail x x. P 08 00. ail x x. P 08 00. UL CSA 0.- mm² -8 AWG -8 AWG 0.- mm² -8 AWG -8 AWG 0 V 8 kv. A mm² 8 AWG 8 AWG Wire stripping ecommended ecommended length (screw) screwdriver torque Protection Notes: IP 0 NEMA For multiple wires connections the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material UL 9 V0. Some accessories can decrease the block's voltage rating. Consult us for more information. Part numbers 0 9 0 End section grey FEDAD V0 099. Circuit separator SCAD V0 099.0 Test socket AL DIA. mm 0 0. Test plug FC DIA. mm 000 8. Assembled jumper bar BJMI A, 0 8. (without IP0 protection) BJMI A, 0 9. BJMI A, 0 80.0 BJMI A, 0 8. BJMI A, 0 0 8. Assembled jumper bar BJM A, 0.0 (with IP0 protection) BJM A, 0.0 BJM A, 0.0 BJM A, 0.0 BJM A, 0 0.0 less jumper bar BJE. 0 A, 099. orange IP0 BJE. 0 A, 099 8.0 BJE. 0 A, 099 98.0 BJE. 0 A, 099 99.0 BJE. 0 A, 099 8.0 BJE. 0 A, 099 8.0 BJE.8 0 A, 8 099 8.0 BJE.9 0 A, 9 099 8.0 BJE.0 0 A, 0 099. 8 Jumper bar BJB 099. 9 less jumper bar BJ.. A, 00 9.0 to be inserted into jaw BJ.. A, 00 9.0 orange IP0 BJ.. A, 00 9.0 BJ.. A, 00 98. BJ.0. A, 0 00 9.0 BJ.0. A, 0 00 9.0 0 Connector plate EL 0. Shield connector CBDS 08 08. Hand tool kit Semi-automatic tool Pneumatic tool kit D eplacement head kit 00 8.0 Extraction tool kit Test connector CE. 099. CEE 099. See section on markers marking method C q C0 w TM SCAD is required with these accessories. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement Double deck - DIN wire size 0, -, mm² - AWG Spacing mm + 0,0 (.8") D,/.D. end section Color Part numbers Standard blocks Blue Orange D,/.D. 099 80. D,/.D.N. 099 8. D,/.D. 099 8. Vertical jumper bar assembly (ITVE accessory ) Double deck terminal block spacing mm 099 80. End stop th. mm BADH V 0 900. End stop th. 9, mm BAMH V 0 8.00 End stop th. 9, mm BAMH V0 V0 09 8.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. UL CSA 0,8-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 800 V 00 V 00 V kv, A 8 A 8 A, mm² AWG AWG Wire stripping ecommended ecommended length (screw) screwdriver torque Protection Notes: IP 0 NEMA For multiple wires connections the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material UL 9 V0. Part numbers End section grey Circuit separator Test socket 0 9 0 8 Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer 8 less jumper bar orange IP0 9 Jumper bar 0 less jumper bar to be inserted into jaw orange IP0 Pivoting jumper bar Jumper bar for alterned jumping Connector plate Vertical jumper bar Shield connector Protection label for protection label Hand tool kit 8 Semi-automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction head kit Test connector FEDAD V0 th.,0 mm SCAD V0 AL () DIA.,0 mm AL () DIA.,0 mm FC DIA.,0 mm BJM A BJM A BJM A BJM A BJM A 0 BJMI A BJMI A BJMI A BJMI A BJMI A 0 BJS A 0 EV BJE. A BJE. A BJE. A BJE. A BJE. A BJE. A BJE.8 A 8 BJE.9 A 9 BJE.0 A 0 BJB BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 BJP A BJA A 0 EL A ITVE CBDS EP blocks VSP D CE. CEE 099. 09 89.00 0 0. 0.00 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 0. 09 9.0 08 08. 0. 0. 00 8.0 099. 099. Some accessories can decrease the block's voltage rating. Consult us for more information. See section on markers marking method C C0 TM Notes : () A circuit separator SC and 00V () rated voltage are required with these accessories. 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks displacement Double deck - DIN wire size 0, -, mm² - AWG Spacing mm + 0,0 (.8") D,/.D.. end section Color Part numbers Standard blocks D,/.D.. 099 9.0 Vertical jumper bar assembly (ITVE accessory ) D,/.D. with partition 099 9.0 End stop th. mm BADH V 0 900. End stop th. 9, mm BAMH V 0 8.00 End stop th. 9, mm BAMH V0 V0 09 8.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. 0,8-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 800 V 00 V 00 V kv, A 8 A 8 A, mm² AWG AWG Wire stripping ecommended ecommended length (screw) screwdriver torque Protection Notes UL CSA IP 0 NEMA For multiple wires connections the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material UL 9 V0. Part numbers End section grey Test socket 9 8 9 0 0 Test plug Assembled jumper bar (without IP0 protection) Assembled jumper bar (with IP0 protection) Jumper bar not assembled Post + screw + washer less jumper bar orange IP0 8 Jumper bar 9 less jumper bar to be inserted into jaw orange IP0 0 Pivoting jumper bar Jumper bar for alterned jumping Connector plate Vertical jumper bar Shield connector Protection label for protection label Hand tool kit Semi-automatic tool 8 Pneumatic tool kit 9 eplacement head kit 0 Extraction tool kit Test connector FEDAD V0 th.,0 mm AL DIA.,0 mm AL DIA.,0 mm FC DIA.,0 mm BJM A BJM A BJM A BJM A BJM A 0 BJMI A BJMI A BJMI A BJMI A BJMI A 0 BJS A 0 EV BJE. A BJE. A BJE. A BJE. A BJE. A BJE. A BJE.8 A 8 BJE.9 A 9 BJE.0 A 0 BJB BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 BJP A BJA A 0 EL A ITVE CBDS EP blocks VSP D CE. CEE 099. 0 0. 0.00 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 0.00 0.0 0.0 0.0 0.0 0 8.0 08 0. 099 9.0 099 9.0 099 9.0 099 9.0 099 98.0 099 99. 099 00. 099 0. 099 0. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 0. 0. 0. 09 9.0 08 08. 0. 0. 00 8.0 099. 099. Some accessories can decrease the block's voltage rating. Consult us for more information. See section on markers marking method C C0 TM () Use of this accessories requires the user to cut out the partition. Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement for sensors/actuators DIN D /.C. Spacing mm (.9") Spacing mm (.9") D /.C..L Block for sensor/actuators with bidirectional LED V= Color Part numbers D/.C. 099 8.00 Color Part numbers - Green Led - ed Led D/.C..L D/.C..L 099 8.0 099 88. To obtain finger safety (IP0) of a terminal block assembly with comb type jumper bar, it is necessary to put one end section on each side of the terminal block assembly. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For multiple wires connections, on the upper deck only, the wires need to be of the same gauge and nature (solide or stranded). Terminal block body material UL 9 V0. * End section kit includes : - right end section - left end section - marker-holder End section grey Comb type jumper bar Hand tool kit Semi-automatic tool Test connector UL CSA NFC VDE 0,- mm² 0,- mm² 0 V 8 KV, A / Gauge mm² Wire strip. ecomm. ecomm. Protection length driver torque IP0 NEMA Part numbers FED.C. end section kit * PC.0 Blue 0 PC.0 ed 0 PC.0 Green/Yellow 0 PC. Blue PC. ed PC. Green/Yellow CE. CEE 099. 099 8.0 099 8.0 099 8.0 099 0. 099 08. 099 09. 099. 099. UL CSA NFC VDE 0,- mm² 0,- mm² 0 V 8 KV, A / Gauge mm² Wire strip. ecomm. ecomm. Protection length driver torque IP0 NEMA Part numbers FED.C. end section kit * PC.0 Blue 0 PC.0 ed 0 PC.0 Green/Yellow 0 PC. Blue PC. ed PC. Green/Yellow CE. CEE 099. 099 8.0 099 8.0 099 8.0 099 0. 099 08. 099 09. 099. 099. Cde Cde Example for 8 connection wiring End section PLC SIGNAL ail Supply Comb type () interconnection for polarity distribution See section on markers marking method C C0 (for marker-holder) Additional block for supply connection TO SENSOS/ACTUATOS End section () 0 or and easily divisible 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks displacement for sensors/actuators DIN D /.C. Spacing mm (.9") Spacing mm (.9") D /.C..L Block for sensors/actuators with bidirectional LED V= Color Part numbers D/.C. 099 89. Color Part numbers - Green Led - ed Led D/.C..L D/.C..L 099 90.0 099 9.0 To obtain finger safety (IP0) of a terminal block assembly with comb type jumper bar, it is necessary to put one end section on each side of the terminal block assembly. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For multiple wires connections, on the upper deck only, the wires need to be of the same gage and nature (solide or stranded). Terminal block body material UL 9 V0. * End section kit includes : - right end section - left end section - marker-holder End section grey Comb type jumper bar Hand tool kit Semi-automatic tool Test connector UL CSA NFC VDE 0,- mm² 0,- mm² 0 V 8 KV, A / Gauge mm² Wire strip. ecomm. ecomm. Protection length driver torque IP0 NEMA Part numbers FED.C. end section kit * PC.0 Blue 0 PC.0 ed 0 PC.0 Green/Yellow 0 PC. Blue PC. ed PC. Green/Yellow CE. CEE 099 8. 099 8.0 099 8.0 099 8.0 099 0. 099 08. 099 09. 099. 099. / Gauge UL CSA NFC VDE 0,- mm² 0,- mm² 0 V 8 KV, A mm² Wire strip. ecomm. ecomm. Protection length driver torque FED.C. end section kit * PC.0 Blue 0 PC.0 ed 0 PC.0 Green/Yellow 0 PC. Blue PC. ed PC. Green/Yellow CE. CEE IP0 NEMA Part numbers 099 8. 099 8.0 099 8.0 099 8.0 099 0. 099 08. 099 09. 099. 099. Cde Cde Example for 8 connection wiring End section SIGNAL PLC ail See section on markers marking method C C0 (for marker-holder) Supply Supply or grounding Additional block for supply connection TO SENSOS/ACTUATOS Comb type () interconnection for polarity distribution End section () 0 or and easily divisible Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement for sensors/actuators DIN D /.C. Spacing mm (.9") Spacing mm (.9") D /.C..L Block for sensors/actuators with bidirectional LED V= Color Part numbers D/.C. 099 9.0 Color Part numbers - Green Led - ed Led D/.C..L D/.C..L 099 9.0 099 9.00 To obtain finger safety (IP0) of a terminal block assembly with comb type jumper bar, it is necessary to put one end section on each side of the terminal block assembly. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For multiple wires connections, on the upper deck only, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material UL 9 V0. * End section kit includes : - right end section - left end section - marker-holder End section grey Comb type jumper bar Hand tool kit Semi-automatic tool Test connector / Gauge UL CSA NFC VDE 0,- mm² 0,- mm² 0 V 8 KV, A mm² Wire strip. ecomm. ecomm. Protection length driver torque IP0 NEMA Part numbers FED.C. end section kit * PC.0 Blue 0 PC.0 ed 0 PC.0 Green/Yellow 0 PC. Blue PC. ed PC. Green/Yellow CE. CEE 099 9.0 099 8.0 099 8.0 099 8.0 099 0. 099 08. 099 09. 099. 099. / Gauge UL CSA NFC VDE 0,- mm² 0,- mm² 0 V 8 KV, A mm² Wire strip. ecomm. ecomm. Protection length driver torque IP0 NEMA Part numbers FED.C. end section kit * PC.0 Blue 0 PC.0 ed 0 PC.0 Green/Yellow 0 PC. Blue PC. ed PC. Green/Yellow CE. CEE 099 9.0 099 8.0 099 8.0 099 8.0 099 0. 099 08. 099 09. 099. 099. Cde Cde Example for 8 connection wiring PLC SIGNAL End section ail See section on markers marking method C C0 (for marker-holder) Supply Supply Supply or grounding Additional block for supply connection TO SENSOS/ACTUATOS Comb type () interconnection for polarity distribution End section () 0 or and easily divisible Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

/ terminal blocks for neutral circuits D /.N. D,/.N. Spacing mm + 0,0 (.98") Spacing mm + 0,0 (.8") D,/8.N. D,/.D.N. Spacing 8 mm + 0,0 (.") Spacing mm + 0,0 (.8") D /8.N. Spacing 8 mm + 0,0 (.") / terminal blocks with blue body can be used for neutral connection. Blue colour permits a good identification. wire size mm² wire size mm² wire size mm² wire size mm² wire size mm² D /.N. 099. D,/.N. 099 0.0 D,/8.N. 099 0.0 D,/.D.N. 099 8. D /8.N. 099 8. and accessories of these blocks are described in standard / block pages. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

displacement For neutral conductor DIN D,/ NT. Spacing mm +0,0.08" wire size 0, -, mm² - AWG D,/8 NT. Spacing 8 mm +0,0." wire size -, mm² - AWG Colour Part numbers Colour Part numbers Blue D,/ NT. 099 9.0 Blue D,/8 NT. 099 9.0 End stop th. 9,9 mm BAM 099 9.0 Other end stop: See section on accessories ail x, x PZ 0 00. ail x x, P 08 00. ail x x, P 08 00. Other rails: See section on accessories Other accessories: See section on accessories Notes For two wire connection max., the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. * Black marking for wire size -, mm² ( - AWG) + notches to identify 8 mm spacing. 9 End section blue Cursor lock Busbar clamp for busbar less jumper bar to be inserted into jaw orange IP0 Hand tool kit Semi-automatic tool 8 Pneumatic tool kit 9 eplacement head kit 0 Extraction tool kit Test connector 0,-, mm² - AWG 0,-, mm² - AWG 00 V kv, A, mm² AWG FEDADNT V0 th.,0 mm VPA BO 0 x mm SFB SFB 0, to mm² H= to mm² H= BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 D CE. CEE Wire stripping ecommended ecommended length (screw) screwdriver torque protection IP 0 NEMA Part numbers 099 9.0 099 8. 0 0. 0 80.0 08 9.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 00 8.0 099. 099. -, mm² - AWG -, mm² - AWG 00 V kv A, mm² AWG FEDADNT V0 th.,0 mm VPA BO 0 x mm SFB SFB 0, to mm² H= to mm² H= D CE.8 CEE Wire stripping ecommended ecommended length (screw) screwdriver torque protection IP 0 NEMA Part numbers 099 9.0 099 8. 0 0. 0 80.0 08 9.0 00 8.0 099 8. 099. 8 0 See section on markers marking method C C 0 CAL 8 C 80 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks displacement Ground terminal blocks not electrically connected to the mounting rail - DIN D /.PI. Spacing mm +0.0.98" wire size 0. - mm² - 8 AWG D,/.PI. Spacing mm +0.0.8" wire size 0. -. mm² - AWG D,/8.PI. Spacing 8 mm +0.0." wire size -. mm² - AWG P/N P/N P/N and accessories, see clamp terminal blocks. Yellow body / Green marking D /.PI. 099 8. Yellow body / Green marking Yellow body / Green marking D,/.PI. 099 0. D,/8.PI. 099 0. * Black marking for wire size -. mm² (- AWG) current wire size Other characteristics 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A / s. mm² 8 AWG Wire stripping ecommended ecommended Protection UL CSA 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 80 A / s., mm² AWG AWG Wire stripping ecommended ecommended Protection UL CSA -, mm² - AWG - AWG -, mm² - AWG - AWG 00 A / s., mm² AWG AWG Wire stripping ecommended ecommended Protection Approvals End section yellow P/N P/N P/N FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 See section on marking Marking method C C0 TM C C0 TM TM C80 CAL8 Terminal blocks displacement Ground terminal blocks not electrically connected to the mounting rail - DIN D /8.PI. Spacing 8 mm +0.0." wire size mm² / AWG wire only and accessories, see clamp terminal blocks. * White marking for wire size mm² ( AWG) P/N P/N P/N Yellow body / Green marking D /8.PI. 099.0 current wire size Other characteristics mm² AWG mm² AWG 80 A / s. mm² AWG Wire stripping ecommended ecommended Protection UL CSA Wire stripping ecommended ecommended Protection UL CSA Wire stripping ecommended ecommended Protection Approvals End section yellow P/N P/N P/N FEMAD V0 th. mm 099.0 See section on marking Marking mode TM C80 CAL8 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement Ground terminal blocks electrically connected to the mounting rail - DIN D /.P. Spacing mm + 0.0.98" wire size 0. - mm² - 8 AWG D,/.P. Spacing mm + 0.0.8" wire size 0. -. mm² - AWG D,/8.P. Spacing 8 mm + 0.0." wire size -. mm² - AWG P/N P/N P/N and accessories, see clamp terminal blocks. Green body / Yellow marking D /.P. 099 0. Green body / Yellow marking Green body/ Yellow marking D,/.P. 099 098. D,/8.P. 099 09. * Black marking for wire size -. mm² (- AWG) current wire size Other characteristics 0.- mm² -8 AWG 0.- mm² -8 AWG 0 A / s. Wire stripping ecommended ecommended Protection UL CSA 0.-. mm² - AWG - AWG 0.-. mm² - AWG - AWG 80 A / s.. mm² AWG AWG Wire stripping ecommended ecommended Protection UL CSA -. mm² - AWG - AWG -. mm² - AWG - AWG 00 A / s.. mm² AWG AWG Wire stripping ecommended ecommended Protection Approvals End section yellow grey P/N P/N P/N FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 See section on marking Marking method C C0 TM C C0 TM TM C80 CAL8 Terminal blocks displacement Ground terminal blocks electrically connected to the mounting rail - DIN D /8.P. Spacing 8 mm + 0.0." wire size mm² / AWG wire only and accessories, see clamp terminal blocks. P/N P/N P/N Green body/ Yellow marking D /8.P. 099 0. * White marking for wire size mm² ( AWG) current wire size Others characterisitcs mm² AWG mm² AWG 80 A / s. mm² AWG Wire stripping ecommended ecommended Protection UL CSA Wire stripping ecommended ecommended Protection UL CSA Wire stripping ecommended ecommended Protection Approvals End section yellow grey P/N P/N P/N FEMAD V0 th. mm 099.0 FEMAD V0 th. mm 099.0 See section on marking Marking mode TM C80 CAL8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

displacement Heavy duty switch terminal blocks with blade - DIN Spacing mm +0,0.98" wire size 0, - mm² - 8 AWG D /.SNT... Colour Part numbers Colour Part numbers With DIA. mm test on two sides. D /.SNT. Orange D /.SNT. With DIA.. mm test on two sides. D /.SNT. 099.0 099.00 099.0 End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For two wire connection max., the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. End section grey orange blue Test plug Shielding connector Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit 8 Extraction tool kit 9 less jumper bar to be inserted into jaw orange IP0 0 Test connector 0 A mm² 8 AWG Wire stripping ecommended ecommended length (screw) screwdriver torque protection IP 0 NEMA Part numbers FEDAD mm th. FEDAD mm th. FEDAD mm th. FC V () mm DIA. CDB 0,8 mm th. D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE 0,- mm² -8 AWG 0,- mm² -8 AWG 0 V 00 V kv 099.0 099.0 099 90. 000 8. 09.0 00 8.0 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 099. 099. Wire stripping ecommended ecommended length (screw) screwdriver torque protection Part numbers 8 9 0 See section on markers marking method C C0 () Only for terminal blocks with test DIA. mm. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Heavy duty switch terminal blocks with blade insulation displacement - DIN D,/.SNT... Spacing mm +0,0.8" wire size 0, -, mm² - AWG D,/8.SNT... Spacing 8 mm +0,0." wire size -, mm² - AWG End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard blocks or 8 mm spacing. For two wires connections, the wires need to be of the same gauge and nature (solid or standed). Terminal block body material is UL 9 V0. * Black marking for wire size -, mm² ( - AWG) End section grey orange blue Test plug Shielding connector Hand tool kit Semi automatique tool Pneumatic tool kit eplacement head kit 8 Extraction head kit 9 less jumper bar to be inserted into jaw orange IP0 0 Test connector Colour Part numbers With DIA. mm test on two sides. Blue Orange D,/.SNT. D,/.SNT. D,/.SNT. With DIA.. mm test on two sides. D,/.SNT. UL CSA 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 00 V 00 V 00 V kv 0 A 8 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection IP 0 NEMA Part numbers FEDAD th. mm FEDAD th. mm FEDAD th. mm FC V () DIA. mm CDB th. 0,8 mm D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE 099.0 099 9. 099. 099. 099.0 099.0 099 90. 000 8. 09.0 00 8.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 099. 099. Colour Part numbers With DIA. mm test on two sides. D,/8.SNT. Orange D,/8.SNT. With DIA.. mm test on two sides. D,/8.SNT. Section Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection IP 0 NEMA FEDAD th. mm FEDAD th. mm FEDAD th. mm FC V () DIA. mm D CE.8 CEE 099. 099.0 099. UL CSA -, mm² - AWG - AWG -, mm² - AWG - AWG 00 V 00 V 00 V kv A A A, mm² AWG AWG Part numbers 099.0 099.0 099 90. 000 8. 00 8.0 099 8. 099. 8 9 0 See section on markers Marking method C0 CAL8 C80 () Only for terminal blocks with test DIA. mm. 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Heavy duty switch terminal blocks with blade insulation displacement - DIN D,/8.SNT.0. Spacing 8 mm +0,0." wire size wire size 0, - mm² -, mm² - 8 AWG - AWG Colour Part numbers With DIA. mm test on two sides. D,/8.SNT.0. 099. Colour Part numbers End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard blocks 8 mm spacing. For two wires connections, the wires need to be of the same gauge and nature (solid or standed). Terminal block body material is UL 9 V0. End section grey orange blue Test plug Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit Extraction head kit 8 Test connector UL CSA Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection IP 0 NEMA Part numbers FEDAD th. mm FEDAD th. mm FEDAD th. mm FC V () DIA. mm D CE.8 CEE -, mm² - AWG - AWG -, mm² - AWG - AWG 00 V 00 V 00 V kv 0 A 0 A 0 A mm² AWG AWG 099.0 099.0 099 90. 000 8. 00 8.0 099 8. 099. Nominale Section UL CSA Wire stripping ecommended ecommended length (screw) screwdriver torque (screw) Protection Part numbers A.D.O. 0 wire size 0, - mm² - 8 AWG A.D.O. wire size -, mm² - AWG 8 See section on markers Marking method CAL8 C80 () Only for terminal blocks with test DIA. mm. Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Heavy duty switch terminal blocks with blade insulation displacement - DIN D,/.S. Spacing mm +0,0.8" wire size 0, -, mm² - AWG D,/8.S. Spacing 8 mm +0,0." wire size -, mm² - AWG Switch connection block mm by polarized plug, delivered separately. Switch connection block 8 mm by polarized plug, delivered separately. Colour Part number D,/.S. 099. Colour Part number D,/8.S. 099. End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard block mm, ( 8 mm with BNFA8 plug ). For two wire connections, the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. * Black marking for wire size -, mm² (- AWG) - - 8 0 9 End section grey Short-circuit plug () Fuse-holder plug (for soldered fuse or flat fuse) () Fuse-holder plug (automotive) () Fuse-holder plug (for fuses x 0 or x ) () BNF whith LED V AC/DC BNF with LED 8 V AC/DC BNF with neon lighting 0-0VAC/DC Plug extractor Shielding connector 8 Hand tool kit 9 Semi automatic tool 0 Pneumatic tool eplacement head kit Extraction head kit less jumper bar to be inserted into jaw orange IP0 Test connector 0 A 8 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection IP 0 NEMA Part numbers FEDAD BNC BNSV BFAUTO V0 black th. mm th. mm th. mm BNFV0 V0 th. mm BNFD () V0 th. mm BNFD () V0 th. mm BNFL () V0 th. mm EXBN CBD th. 0,8 mm D BJ., A BJ. BJ. BJ. BJ.0 BJ.0 CE. CEE UL CSA 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 00 V () 00 V 00 V kv, A, A, A, A 0, A 0 099.0 09 8. 09 8. 099 8. 09 998. 09 999. 09 9. 09 9. 0 08.0 09.0 00 8.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 099. 099. -, mm² - AWG - AWG -, mm² - AWG - AWG 00 V () 00 V 00 V kv A A A Section, mm² AWG AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection IP 0 NEMA FEDAD BNCT8 BNSV8 BNF EXBN D CE.8 CEE UL CSA th. mm th. 8 mm th. 8 mm th. 8 mm Part numbers 099.0 09 9.0 09 9.0 09 9.0 0 08.0 00 8.0 099 8. 099. See section on markers Marking method C0 C CAL8 C80 () Leakage current with LED V or 8 V : <, ma and with neon lamp 0 or 0 VAC/DC : < 0, ma. () See selection guide for dimensions of plugs and type of fuses to use. () Terminal block insulating voltage, working voltage according to fuse. 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Selection guide for different types of plugs s of plugs s of fuses D /.S. D /.SFAT. D,/.S. D,/8.S. Switching function Short-circuit plug BNC without test 09 8. BNCT8 09 9.0 with test closed 8,." Plug open 9." Plug with solder tags and screws () Soldered fuses type FUBS - 0, to A - 0 V Flat fuses type FUPLV - to A - 0 V BNS.D 09 8. BNSV 09 8. BNSV8 09 9.0 Fuse protection function Fuse holder plug Automotive miniature fuses () type FUAUTO A to A - V maxi BFSAUTO V0 black 099 8.0 BFAUTO V0 black 099 8. Fuses x 0 Fuse holder plug type FU0-0, to A - 0 V Fuses x type FU -, to, A - 0 V BNF BNFD () BNFD() BNFL () 09 998. 09 999. 09 9. 09 9. BNF 09 9.0 s of fuses Soldered fuses FUBS 0, A FUBS A FUBS A FUBS A FUBS A 0 89. 0 89. 0 89.0 0 89. 0 89. Flat fuses FUPLV A FUPLV A FUPLV A Fuses x 0 mm FU0 0, A FU0 A FU0 A FU0. A FU0 A 0008 09.0 0008 09. 0008 098.0 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 Automotive miniature fuses FUAUTO A 09 89. FUAUTO A 09 880.0 Fuses x mm FU. A 0. FU A 0. FU. A 0 8.0 FU A 0 9.0 FU. A 0 0.0 Note : () Compatible with electronic components max.diameter or thickness for components : - plug BNSV : mm/." max. - plug BNSV8 : mm /."max. () For all fuses, the dissipated load should remain under 0,8 W. () with led V AC/DC. () with led 8 V AC/DC. () avec neon lamp 0-0 V AC/DC. Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

displacement Heavy duty switch terminal blocks with plug - DIN D /.S. Spacing mm +0,0.98" wire size 0, - mm² - 8 AWG Colour Part number D /.S. 099.0 Colour Part number End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For two wire connection max., the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. 8 9 End section grey orange Fuse-holder plug Plug extractor Soldered fuses Shielding connector Hand tool kit Semi-automatic tool 8 Pneumatic tool kit 9 eplacement head kit 0 Extraction tool kit less jumper bar to be inserted into jaw orange IP0 Test connector 0,- mm² -8 AWG 0,- mm² -8 AWG 00 V () kv 0 A mm² Wire stripping ecommended ecommended length (screw) screwdriver torque protection IP 0 NEMA FEDAD th. mm FEDAD th. mm BNS.D th. mm EXBN FUBS FUBS FUBS FUBS FUBS CBD 0. A A A A A th. 0,8 mm D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE Part numbers 099.0 099.0 09 8. 0 08.0 0 89. 0 89. 0 89.0 0 89. 0 89. 09.0 00 8.0 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 099. 099. Wire stripping ecommended ecommended length (screw) screwdriver torque protection Part numbers 0 See section on markers marking method C C0 () Terminal block insulating voltage. Working voltage according to fuse. Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

displacement Heavy duty switch terminal blocks with fuse-holder plug for automotive Mini Fuse - DIN D /.SFAT... Spacing mm +0,0.98" wire size 0, - mm² -8 AWG Colour Part numbers With DIA. mm test on two sides. D /.SFAT. Orange D /.SFAT. With DIA.. mm test on two sides. D /.SFAT. 099. 099. 099. Colour Part numbers End stop th. 9 mm BADL V0 099 90.0 End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes For two wire connection max., the wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. 9 End section grey orange Test plug Fuse-holder plug black Mini Fuse - V max. Shielding connector Hand tool kit Semi-automatic tool kit 8 Pneumatic tool kit 9 eplacement head kit 0 Extraction tool kit less jumper bar to be inserted into jaw orange IP0 Test connector Wire stripping ecommended ecommended length (screw) screwdriver torque protection IP 0 NEMA FEDAD FEDAD FC () BFAUTO FUAUTO FUAUTO CDB D BJ., A BJ., A BJ., A BJ., A BJ.0, A BJ.0, A CE. CEE th. mm th. mm DIA. mm A A th. 0,8 mm 0 0 0,- mm² -8 AWG 0,- mm² -8 AWG 00 V () 0 V () kv 0 A A mm² Part numbers 099.0 099.0 000 8. 099 8.0 09 89. 09 880.0 09.0 00 8.0 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 099. 099. Wire stripping ecommended ecommended length (screw) screwdriver torque protection Part numbers 8 0 See section on markers marking method C C0 () Only for terminal blocks with test DIA. mm. () Terminal block insulating voltage. Working voltage according to fuse ( V max.). Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Displacement Fuse blocks for x 0 and x fuses - DIN D,/8.SFT. Spacing 8 mm +0,0." wire size 0, -, mm² - AWG D,/8.SF...T. Spacing 8 mm +0,0." wire size 0, -, mm² - AWG Colour Part numbers With DIA. or. mm screw test socket for test Orange D,/8.SFT. D,/8.SFT. 099 08. 099 09. Colour Part numbers With DIA. or. mm screw test socket for test () () () D,/8.SFLT. D,/8.SFDT. D,/8.SFDT. 099. 099. 099. End stop th. 9.9 mm BAM V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard blocks 8 mm spacing. For two wires connections, the wires need to be of the same gauge and nature (solid or standed). Terminal block body material is UL 9 V0. On all the blocks a DIA. or. mm test across the grip can be performed. 8 9 0 End section gris Test plug Assembly rod Assembly ring x0 fuses - 0 V x fuses - 0 V Hand tool kit Semi automatic tool 8 Pneumatic tool kit 9 eplacement head kit 0 Extraction head kit Test connector 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 0 V () 00 V () 00 V () 8 kv, A 8 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended protection IP 0 NEMA FEDAD FC MC TGA8 TGA8 TGA8 ANT FU0 FU0 FU0 FU0 FU0 FU FU FU FU FU D CE.8 CEE / Gauge UL CSA th., mm DIA. mm 0, A A A, A A, A A, A A, A P/N 099 8. 00 9.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. FEDAD FC MC TGA8 TGA8 TGA8 ANT FU0 FU0 FU0 FU0 FU0 FU FU FU FU FU D CE.8 CEE / Gauge UL CSA 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 00 V () 00 V () 00 V () kv, A 8 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended protection IP 0 NEMA th., mm DIA. mm 0, A A A, A A, A A, A A, A P/N 099 8. 00 9.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. () Blown-fuse indicator by 0 V - 0 V neon lamp (leakage current with neon lamp < 0, ma (0 V) - < 0, ma (0 V)). () Blown-fuse indicator by LED V ( +V labeled) (leakage current with LED V or 8 V <, ma). () Blown-fuse indicator by LED 8 V ( +8V labeled) (leakage current with LED V or 8 V <, ma). () Terminal block insulating voltage. Working voltage according to fuse. See section on markers Marking method C80 CAL8 C80 CAL8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement Fuse blocks for x0 and x fuses - DIN D,/8.SFT. Spacing 8 mm +0,0." wire size -, mm² - AWG D,/8.SF...T. Spacing 8 mm +0,0." wire size -, mm² - AWG Colour Part numbers For test sockets DIA. or DIA., mm. Orange D,/8.SFT. D,/8.SFT. 099 8. 099 8. Colour Part numbers For test sockets DIA. or DIA., mm. () () () D,/8.SFLT. D,/8.SFDT. D,/8.SFDT. 099 8. 099 88. 099 89. End stop th. 9.9 mm BAM V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard bloc 8 mm. For multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. On all the blocks a DIA. or. mm test across the grip can be performed. Black marking for wire size -, mm² ( - AWG) 8 9 0 End section grey Test plug Assembly rod Assembly ring x0 fuses - 0 V x fuses - 0 V Hand tool kit Semi automatic tool 8 Pneumatic tool kit 9 eplacement head kit 0 Extraction head kit Test connector / Gauge FEDAD FC MC TGA8 TGA8 TGA8 ANT FU0 FU0 FU0 FU0 FU0 FU FU FU FU FU D CE.8 CEE UL CSA -, mm² - AWG - AWG -, mm² - AWG - AWG th., mm DIA. mm 0, A A A, A A, A A, A A, A 0 V () 00 V () 00 V () 8 kv, A 0 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended protection IP 0 NEMA P/N 099 8. 00 9.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. / Gauge FEDAD th., mm FC DIA. mm TGA8 TGA8 TGA8 ANT FU0 0, A FU0 A FU0 A FU0, A FU0 A FU, A FU A FU, A FU A FU, A D CE.8 CEE UL CSA -, mm² - AWG - AWG -, mm² - AWG - AWG 00 V () 00 V () 00 V () kv, A 0 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended protection IP 0 NEMA P/N 099 8. 00 9.0 08. 08. 08. 08. 0008 88. 0008 90. 0008 9.00 0008 89. 0008 9.0 0. 0. 0 8.0 0 9.0 0 0.0 00 8.0 099 8. 099. () Blown-fuse indicator by 0 V - 0 V neon lamp (leakage current with neon lamp < 0, ma (0 V) - < 0, ma (0 V)). () Blown-fuse indicator by LED V ( +V labeled) (leakage current with LED V or 8 V <, ma). () Blown-fuse indicator by LED 8 V ( +8V labeled) (leakage current with LED V or 8 V <, ma). () Terminal block insulatig voltage. Working voltage according to fuse. See section on markers Marking method C80 CAL8 C80 CAL8 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement "Neutral" switch block - DIN D,/8.SNNT. Spacing 8 mm +0,0." wire size 0, -, mm² - AWG Colour Part number With DIA. or. mm test on two sides. body / Blue grip D,/8.SNNT. 099 0.0 Colour Part number End stop th. 9.9 mm BAM V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard blocks 8 mm spacing. For two wire connections, the wires need to be of the same gauge and nature (solid or standed). Terminal block body material is UL 9 V0. On all the blocks a DIA. or. mm test across the grip can be performed. 8 End stop grey Test plug Assembly rod Assembly ring Hand tool kit Semi automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction head kit 0 Test connector UL CSA 0,-, mm² - AWG - AWG 0,-, mm² - AWG - AWG 0 V 00 V 00 V 8 kv 0 A 8 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection FEDAD th., mm FC MC DIA. mm TGA8 TGA8 TGA8 ANT D CE.8 CEE IP 0 NEMA Part numbers 099 8. 00 9.0 08. 08. 08. 08. 00 8.0 099 8. 099. Nominale Section UL CSA Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection Part numbers IP 0 NEMA 9 0 See section on markers Marking method C80 CAL8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks Displacement "Neutral" switch block - DIN D,/8.SNNT. Spacing 8 mm +0,0." wire size -, mm² - AWG Colour Part numbers With DIA or DIA.. mm screw test socket for test. body/ Blue grip D,/8.SNNT. 099 8. Colour Part numbers End stop th. 9.9 mm BAM V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard bloc 8 mm. For multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. On all the blocks a DIA. or. mm test across the grip can be performed. Black marking for wire size -, mm² ( - AWG) 8 End section gris Test plug Assembly rod Assembly ring Hand tool kit Semi automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction head kit 0 Test connector UL CSA -, mm² - AWG - AWG -, mm² - AWG - AWG 0 V 00 V 0 V 8 kv 0 A 0 A 0 A, mm² AWG AWG Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection IP 0 NEMA Part numbers FEDAD th., mm FC MC DIA. mm TGA8 TGA8 TGA8 ANT D CE.8 CEE 099 8. 00 9.0 08. 08. 08. 08. 00 8.0 099 8. 099. Nominale Section UL CSA Wire stripping ecommended ecommended lenght (screw) screwdriver torque (screw) Protection Part numbers IP 0 NEMA 9 0 See section on markers Marking method C80 CAL8 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks Component holder - DIN Spacing mm +0,0.8" wire size 0, -, mm² - AWG D,/..D Spacing mm +0,0.8" wire size 0, -, mm² - AWG D,/..D Block equipped with one N08 diode Block equipped with one N08 diode Color Part number Color Part number D,/..D 099 8.0 D,/..D 099 9. End stop th. 0 mm BAM V 00. End stop th. 0 mm BAM V0 V0 099 9.0 End stop th. 9, mm BAM V 0 88.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Pollutiond degree / Gauge UL CSA 0, -, mm² - AWG - AWG 0, -, mm² - AWG - AWG 80 V A, mm² AWG AWG Wire strip. ecomm. ecomm. Protection /gauge UL CSA 0, -, mm² - AWG - AWG 0, -, mm² - AWG - AWG 80 V A, mm² AWG AWG Wire strip. ecomm. ecomm. Protection End section grey Shielding connector Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit 8 less jumper bar to be inserted into jaw orange IP0 9 Test connector FEMAD th. CBM th. CBM8 th. D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE,0 mm 0, mm 0,8 mm Part numbers 099.0 08. 08. 00 8.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 099. 099. FEMAD th. CBM th. CBM8 th. D BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 CE. CEE,0 mm 0, mm 0,8 mm Part numbers 099.0 08. 08. 00 8.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 099. 099. 8 9 See section on markers Marking method C0 C C0 C 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ado MINI BLOCKS A reduced size range Numerous mounting options DIN ail Plate A very legible marking mini blocks use the same marking technique as standard ENTELEC terminals, located on the top of the block. MINI BLOCKS ASSEMBLY AND ACCESSOIES ail mounted DIN and DIN : DIN : DS... DIN : D... Panel mounted with snap in mounting foot : Snap in : DH... At the end of the terminal blocks assembly : - End section : (same accessory for any type of terminal block assembly) FEAD : V/ End section to be mounted directly on FEAD : / the open part of the terminal block. - End terminal block : DE... (DIN) This terminal block has to be mounted at DSE... (DIN) the end of the terminal blocks assembly : it reduces its size, because it suppresses the insulation rib (- mm). Nota : This terminal block cannot be accidentally located anywhere else into the terminal block assembly (without locking holes). With screw mounting kit : DB... In the terminal blocks assembly : - Separator : (same accessory for any type of terminal block assembly) FEAD : V/ Accessory which snaps on the terminal FEAD : / blocks, separates and makes visible the different parts of the terminal blocks assembly. Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - DIN Spacing mm +0,0.98" wire size 0, - mm² - 8 AWG DS /.,.".".9",.9" Spacing mm +0,0.8" wire size 0, -, mm² - AWG DS,/. 0,.8" DS (with rib) DSE (without rib only for T.B assembly extremity.9 Color Part number Blue Orange DS /. DS /.N. DS /. DSE /. 099 9. 099 98.0 099 9. 099 00. Color Part number Blue Orange DS,/. DS,/.N. DS,/. DSE,/. 099 9. 099 99.0 099 98.00 099 8. End stop th. 9.9 mm BAM V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Standard blocks and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. * Notchs to identify 8 mm spacing. End section grey orange Separator grey orange less jumper bar to be inserted into jaw orange IP0 Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit 8 Extraction tool kit 9 Test connector Standed Standed / Gauge 0,- mm² -8 AWG 0,- mm² -8 AWG 000 V 00 V 8 kv, A 0 A mm² 8 AWG Wire strip. ecomm. ecomm. Protection IP 0 NEMA 0,8-, mm² - AWG 0,-, mm² - AWG 000 V 00 V Wire strip. ecomm. ecomm. Protection IP 0 NEMA Part number Part number FEAD V0 th., mm 099.0 FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. FEAD V0 th., mm 099. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 9.0 BJ., A 00 9.00 BJ., A 00 98. BJ., A 00 9.0 BJ.0, A 0 00 9.0 BJ.0, A 0 00 98. BJ.0, A 0 00 9.0 BJ.0, A 0 00 99. D CE. CEE 00 8.0 099. 099. D CE. CEE 00 8.0 099. 099. / Gauge Standed Standed, A 0 A, mm² AWG 8 9 See section on markers marking method On top C On top C 80 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - DIN Spacing 8 mm +0,0." -, mm² - AWG DS,/8. wire size Spacing 8 mm +0,0.8" mm² AWG DS /8. wire size DS (with rib) DSE (without rib only for T.B assembly extremity) Color Part number Color Part number Blue Orange DS,/8. DS,/8.N. DS,/8. DSE,/8. 099 0.0 099 0.0 099 0.0 099 9. Blue Orange DS /8. DS /8.N. DS /8. DSE /8. 099. 099. 099. 099.0 End stop th. 9.9 mm BAM V0 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Terminal block body material is UL 9 V0. DS,/8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). DS /8. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. End section grey orange Separator grey orange Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit 8 Test connector Standed Standed / Gauge -, mm² - AWG -, mm² - AWG 000 V 00 V A A, mm² AWG Wire strip. ecomm. ecomm. Protection IP 0 NEMA Part number Part number FEAD V0 th., mm 099.0 FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. FEAD V0 th., mm 099. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. FEAD V0 th.,0 mm 099. D CE.8 CEE 00 8.0 099 8. 099. D 00 8.0 / Gauge Standed Standed mm² AWG mm² AWG 000 V A mm² AWG Wire strip. ecomm. ecomm. Protection IP 0 NEMA 8 See section on markers marking method On top CAL8 On top CAL8 Low Products & Systems 8 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting rail DIN DS /.PI. Spacing mm +0,0.98" wire size 0, - mm² - 8 AWG,."." 0,.8".9",.9" DS,/.PI. Spacing mm +0,0.8" wire size 0, -, mm² - AWG DS,/8.PI. Spacing 8 mm +0,0." wire size -, mm² - AWG.9 Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. P/N Yellow body / green marking DS /.PI. 099 99.0 P/N P/N Yellow body / green marking Yellow body / green marking DS,/.PI. 099 00. DS,/8.PI. 099 0.0 current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A / s. mm² 8 AWG Wire strip. ecomm. ecomm. Protection IP0 NEMA 0,8-, mm² - AWG 0,-, mm² - AWG 80 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection IP0 NEMA -, mm² - AWG -, mm² - AWG 00 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection P/N P/N P/N FEAD V0 th., mm 099.0 FEAD V0 th., mm 099.0 FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. FEAD V0 th., mm 099. FEAD V0 th., mm 099. IP0 NEMA See section on markers mode C C CAL8 Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting rail DIN DS /8.PI. Spacing 8 mm +0,0." wire size mm² / AWG wire only Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. P/N P/N P/N Yellow body / green marking DS /8.PI. 099. current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange mm² AWG mm² AWG 80 A / s. mm² AWG Wire strip. ecomm. ecomm. Protection IP0 NEMA Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection P/N P/N P/N FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. See section on markers mode CAL8 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - ground terminal blocks electrically connected to the mounting rail DIN DS,/8.P. Spacing 8 mm +0,0." wire size -, mm² / - AWG DS /8.P. Spacing 8 mm +0,0." wire size mm² / AWG - wire only Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange P/N Green body / yellow marking Green body / yellow marking DS,/8.P. 099 8. DS /8.P. 099.0 -, mm² - AWG -, mm² - AWG 00 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection IP0 NEMA P/N mm² AWG mm² AWG 80 A/ s. mm² AWG Wire strip. ecomm. ecomm. Protection IP0 NEMA P/N P/N FEAD V0 th., mm 099.0 FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. FEAD V0 th., mm 099. See section on markers mode On top CAL8 On top CAL8 P/N P/N P/N current short-circuit wire size nominal / gauge Other characteristics UL CSA Wire strip. ecomm. ecomm. Protection UL CSA Wire strip. ecomm. ecomm. Protection UL CSA Wire strip. ecomm. ecomm. Protection Approvals P/N P/N P/N Low Products & Systems 8 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - DIN D /. Spacing mm +0,0 (.98") wire size 0, - mm² - 8 AWG.",." D,/. Spacing mm +0,0 (.8") wire size 0, -, mm² - AWG,." D (with rib) DE (without rib only for T.B assembly extremity.9 Colour Part numbers Colour Part numbers Blue Orange D /. D /.N. D /. DE /. 099 9. 099 9. 099 9. 099 9. Blue Orange D,/. D,/.N. D,/. DE,/. 099 8. 099 8. 099 8. 099.0 End stop th., mm BADL V0 099 0. ail x x P 0 00. Other end stops, rails and accessories : see section on accessories. Observations Standard blocks, and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. End section grey orange Separator grey orange less jumper bar to be inserted into jaw orange IP0 Hand tool kit Semi automatic kit Pneumatic tool kit eplacement head kit 8 Extraction tool kit 9 Test connector / Gauge FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 D CE. CEE 0, - mm² -8 AWG 0, - mm² -8 AWG 000 V 00 V 8 kv, A 0 A mm² 8 AWG Wire stripping ecommended ecommended protection IP 0 NEMA P/N 099.0 099. 099. 099. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 00 8.0 099. 099. 0,8 -, mm² - AWG 0, -, mm² - AWG 000 V 00 V 8 kv, A 0 A / Gauge, mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 D CE. CEE P/N 099.0 099. 099. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 00 8.0 099. 099. 9 8 See section on markers marking method On top C On top C 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - DIN D,/8. Spacing 8 mm +0,0 (.") wire size -, mm² - AWG D /8. Spacing 8 mm +0,0." wire size mm² AWG D (with rib) DE (without rib only for T.B assembly extremity) Colour Part numbers Colour Part numbers Blue Orange D,/8. D,/8.N. D,/8. DE,/8. 099 8.0 099 89.0 099 88.0 099.00 Blue Orange D /8. D /8.N. D /8. DE /8. 099 0.00 099 08. 099 0.0 099 0.0 End stop th., mm BADL V0 099 0. ail x x P 0 00. Other end stops, rails and accessories : see section on accessories. Observations Terminal block body material is UL 9 V0. D,/8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). D /8. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. End section grey orange Separator grey orange Hand tool kit Semi automatic kit Pneumatic tool kit eplacement head kit Extraction tool kit 8 Test connector / Gauge FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm D CE.8 CEE -, mm² - AWG -, mm² - AWG 000 V 00 V 8 kv A A, mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA P/N 099.0 099. 099. 099. 00 8.0 099 8. 099. / Gauge mm² AWG mm² AWG 000 V A mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm D P/N 099.0 099. 099. 099. 00 8.0 8 See section on markers marking method On top CAL8 On top CAL8 Low Products & Systems 8 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting rail DIN D /.PI. Spacing mm + 0,0.98" wire size 0, - mm² - 8 AWG.",.",." D,/.PI. Spacing mm + 0,0.8" wire size 0, -, mm² - AWG 8 mm +0,0." A.D.O. wire size -, mm² - AWG D,/8.PI..9 Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange Part number Yellow body / Green marking D /.PI. 099 9.0 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A / s. mm² 8 AWG Wire strip. ecomm. ecomm. Protection IP 0 FEAD V0 th., mm FEAD V0 th., mm NEMA Part number Yellow body / Green marking D,/.PI. 0,8-, mm² - AWG 0,-, mm² - AWG 80 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection IP 0 FEAD V0 th., mm FEAD V0 th., mm 099 8. D,/8.PI. 099 90.0 NEMA Part number Yellow body / Green marking -, mm² - AWG -, mm² - AWG 00 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection IP 0 FEAD V0 th., mm FEAD V0 th., mm NEMA Part number Part number Part number 099.0 099. 099.0 099. 099.0 099. See section on markers mode On top C On top C On top CAL8 Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting rail DIN 8 mm +0,0." wire size mm² / AWG wire only D /8.PI. Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section grey orange Part number Part number Part number Yellow body / Green marking D /8.PI. mm² AWG mm² AWG 80 A / s. mm² AWG Wire strip. ecomm. ecomm. Protection IP 0 FEAD V0 th., mm FEAD V0 th., mm 099 09. NEMA Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection Part number Part number Part number 099.0 099. See section on markers mode On top CAL8 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - ground terminal blocks electrically connected to the mounting rail DIN D,/8.P. Spacing 8 mm +0,0." wire size -, mm² - AWG D /8.P. Spacing 8 mm +0,0." wire size mm² / AWG wire only Part number Part number Part number Green body / Yellow marking Green body / Yellow marking D,/8.P. 099.0 D /8.P. 099.0 current short-circuit wire size nominal / gauge Other characteristics -, mm² - AWG -, mm² - AWG 00 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection mm² AWG mm² AWG 80 A / s. mm² AWG Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection Approvals End section grey orange Part number Part number Part number FEAD V0 th., mm FEAD V0 th., mm 099.0 099. FEAD V0 th., mm FEAD V0 th., mm 099.0 099. See section on markers mode On top CAL8 On top CAL8 Part number Part number Part number current short-circuit wire size nominal / gauge Other characteristics UL CSA UL CSA Wire strip. ecomm. ecomm. Protection Wire strip. ecomm. ecomm. Protection UL CSA Wire strip. ecomm. ecomm. Protection Approvals Part number Part number Part number Low Products & Systems 8 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - Base mount with flanges DB /. Spacing mm +0,0.9" wire size 0, - mm²." - 8 AWG 8.0" Spacing mm +0,0.8" wire size 0, -, mm² - AWG DB,/..9 Colour Part numbers Colour Part numbers Blue Orange DB /. DB /.N. DB /. 099 0.0 099 0.0 099 0.00 Blue Orange DB,/. DB,/.N. DB,/. 099. 099.0 099. For drilling patterns see page: assembly and accessories Observations Standard blocks, and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. 0,- mm² -8 AWG 0,- mm² -8 AWG 000 V 00 V 8 kv, A 0 A / Gauge mm² 8 AWG Wire stripping ecommended ecommended protection IP 0 NEMA P/N End section grey FEAD V0 (left+ right) orange FEAD V0 Separator grey FEAD V0 th.,0 mm orange FEAD V0 th.,0 mm less jumper bar BJ., A orange IP0 BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit 8 Extraction tool kit 9 Test connector D CE. CEE 099 9.0 099 0.0 099. 099. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 00 8.0 099. 099. 0,8-, mm² - AWG 0,-, mm² - AWG 000 V 00 V 8 kv, A 0 A / Gauge, mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA FEAD V0 FEAD V0 FEAD V0 th.,0 mm FEAD V0 th.,0 mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 D CE. CEE P/N 099.0 099. 099. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 00 8.0 099. 099. 9 8 See section on markers marking method On top C On top C 88 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - Base mount with flanges Spacing 8 mm +0,0." wire size -, mm² - AWG DB,/8. DB /8. Spacing 8 mm +0,0." wire size mm² AWG Colour Part numbers Colour Part numbers Blue Orange DB,/8. DB,/8.N. DB,/8. 099. 099 9.0 099 8.0 Blue Orange DB /8. DB /8.N. DB /8. 099. 099 8.0 099. For drilling patterns see page: assembly and accessories Observations Terminal block body material is UL 9 V0. DB,/8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). DB /8. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. / Gauge 0,8-, mm² - AWG 0,-, mm² - AWG 800 V 00 V 8 kv A A, mm² AWG Wire stripping ecommended ecommended protection End section grey FEAD V0 (left+ right) orange FEAD V0 Separator grey FEAD V0 th.,0 mm orange FEAD V0 th.,0 mm Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit 8 Test connector D CE.8 CEE IP 0 NEMA P/N 099 9.0 099 0.0 099. 099. 00 8.0 099 8. 099. mm² AWG mm² AWG 000 V A / Gauge mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA FEAD V0 FEAD V0 FEAD V0 th.,0 mm FEAD V0 th.,0 mm D P/N 099 9.0 099 0.0 099. 099. 00 8.0 8 See section on markers marking method On top CAL8 On top CAL8 Low Products & Systems 89 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting plate Base mount with flanges in mounting foot DB /.PI. Spacing mm +0,0 (.98") wire size 0, - mm² - 8 AWG." 8.0" DB,/.PI. Spacing mm +0,0 (.8") wire size 0, -, mm² - AWG DB,/8.PI. Spacing 8 mm +0,0 (.") wire size -, mm² - AWG.9 Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section kit with flanges grey (left + right ) orange Part number Yellow body / Green marking FEAD FEAD DB /.PI. 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A / s. mm² 8 AWG V0 V0 099 0.0 Wire strip. ecomm. ecomm. Protection IP 0 NEMA Part number Yellow body / Green marking FEAD FEAD DB,/.PI. 0,8-, mm² - AWG 0,-, mm² - AWG 80 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection V0 V0 099. DB,/8.PI. 099 0.0 IP 0 NEMA Part number Yellow body / Green marking FEAD FEAD -, mm² - AWG -, mm² - AWG 00 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection V0 V0 IP 0 NEMA Part number Part number Part number 099 9.0 099 0.0 099 9.0 099 0.0 099 9.0 099 0.0 See section on markers mode C C CAL8 Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting plate Base mount with flanges in mounting foot DB /8.PI. Spacing 8 mm +0,0 (.") wire size mm² / AWG wire only Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section kit with flanges grey (left + right ) orange Part number Part number Part number Yellow body / Green marking DB /8.PI. mm² AWG mm² AWG 80 A / s. mm² AWG Wire strip. ecomm. ecomm. Protection IP 0 FEAD FEAD V0 V0 099 9.0 NEMA UL CSA Wire strip. ecomm. ecomm. Protection UL CSA Wire strip. ecomm. ecomm. Protection Part number Part number Part number 099 9.0 099 0.0 See section on markers mode CAL8 90 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - Base mount with snap in mounting foot DH /. Spacing mm +0,0 (.98") wire size 0, - mm²." - 8 AWG 8.0 DH,/. Spacing mm +0,0 (.8") wire size 0, -, mm² - AWG.9 Colour Part numbers Colour Part numbers Blue Orange DH /. DH /.N. DH /. 099 0.0 099 0.0 099 0.0 Blue Orange DH,/. DH,/.N. DH,/. 099 9.0 099.0 099 0.0 Observations For drilling patterns see page: assembly and accessories Standard blocks, and 8 mm. For multiple wires connections, the two wires need to be of the same gauge and nature (solid or stranded). Terminal block body material is UL 9 V0. End section gris orange Separator gris orange less jumper bar to be inserted into jaw orange IP0 Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit 8 Extraction tool kit 9 Test connector 0,- mm² -8 AWG 0,- mm² -8 AWG 000 V 00 V 8 kv, A 0 A / Gauge mm² 8 AWG Wire stripping ecommended ecommended protection IP 0 NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 D CE. CEE 099.0 099. 099. 099. 00 9.0 00 9.0 00 9.0 00 98. 00 9.0 00 9.0 00 8.0 099. 099. 0,8-, mm² - AWG 0,-, mm² - AWG 000 V 00 V 8 kv, A 0 A / Gauge, mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm BJ., A BJ., A BJ., A BJ., A BJ.0, A 0 BJ.0, A 0 D CE. CEE P/N 099.0 099. 099. 099. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 99. 00 8.0 099. 099. 8 9 See section on markers marking method On top: C On top: C Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Miniblocks Displacement - Base mount with snap in mounting foot DH,/8. Spacing 8 mm +0,0 (.") wire size -, mm² - AWG DH /8. Spacing 8 mm +0,0." wire size mm² AWG Colour Part numbers Colour Part numbers Blue Orange DH,/8. DH,/8.N. DH,/8. 099. 099. 099. Blue Orange DH /8. DH /8.N. DH /8. 099 0.0 099. 099. For drilling patterns see page: assembly and accessories Observations Terminal block body material is UL 9 V0. DH,/8. block : for multiple wire connections, the two wires need to be of the same gauge and nature (solid or stranded). DH /8. block : connection of only one solid or stranded mm² wire. * Notches to identify 8 mm spacing. End section gris orange Separator gris orange Hand tool kit Semi automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit 8 Test connector / Gauge -, mm² - AWG -, mm² - AWG 800 V 00 V 8 kv A A, mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA P/N FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm D CE.8 CEE 099.0 099. 099. 099. 00 8.0 099 8. 099. / Gauge mm² AWG mm² AWG 000 V A mm² AWG Wire stripping ecommended ecommended protection IP 0 NEMA FEAD V0 th., mm FEAD V0 th., mm FEAD V0 th.,0 mm FEAD V0 th.,0 mm D P/N 099.0 099. 099. 099. 00 8.0 8 See section on markers marking method On top : CAL8 On top : CAL8 9 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting plate Base mount with snap in mounting foot DH /.PI. Spacing mm +0,0.98" wire size 0, - mm² - 8 AWG." 8.0" DH,/.PI. Spacing mm +0,0.8" wire size 0, -, mm² - AWG DH,/8.PI. Spacing 8 mm +0,0." wire size -, mm² - AWG.9 Part number Yellow body / Green marking Part number Yellow body / Green marking Part number Yellow body / Green marking Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section kit with flanges grey (left + right ) orange DH /.PI. 099 08. 0,- mm² -8 AWG 0,- mm² -8 AWG 0 A / s. mm² 8 AWG Wire strip. ecomm. ecomm. Protection FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. IP 0 NEMA DH,/.PI. 099. 0,8-, mm² - AWG 0,-, mm² - AWG 80 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. IP 0 NEMA DH,/8.PI. 099. -, mm² - AWG -, mm² - AWG 00 A / s., mm² AWG Wire strip. ecomm. ecomm. Protection FEAD V0 th., mm 099.0 FEAD V0 th., mm 099. IP 0 NEMA Part number Part number Part number See section on markers mode C C CAL8 Miniblocks Displacement - ground terminal blocks not electrically connected to the mounting plate Base mount with snap in mounting foot DH /8.PI. Spacing 8 mm +0,0." wire size mm² / AWG wire only Other accessories of this terminal blocks: see pages of same size standard blocks. * Notches to identify 8 mm spacing. current short-circuit wire size nominal / gauge Other characteristics Approvals End section kit with flanges grey (left + right ) orange Part number Part number Part number Yellow body / Green marking DH /8.PI. 099.0 mm² AWG mm² AWG 80 A / s. mm² AWG Wire strip. ecomm. ecomm. Protection IP 0 FEAD V0 th., mm FEAD V0 th., mm NEMA UL CSA Wire strip. ecomm. ecomm. Protection UL CSA Wire strip. ecomm. ecomm. Protection Part number Part number Part number 099.0 099. See section on markers mode CAL8 Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement Pluggable Feed-through DIN + pluggable + pluggable Spacing, mm.00" D,/.-CPE Spacing, mm.00" D,/.-CPE Black marking to identify wire size. Black marking to identify wire size. Colour Part number Colour Part number D,/.-CPE 090 8. D,/.-CPE 090 8.0 Mating female plug : Mating female plug : L 00 L 00 End stop th. 0 mm BADL 099 90.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 End section grey() beige() Jumper bar isolation plug kit for jumper bar Locking lever Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 coding peg kit V AC V DC A Body Metallic part Total Protection weight weight weight, g,8 g 8, g IP 0 0.0 lb 0.008 lb 0.08 lb NEMA EIP V.CPE D COCE See page 9 See page 9 UL CSA NFE DIN - AWG wires (same wire size) per jaw 00 00 00 00 00 00 UL CSA NFE DIN -, mm² wires (same wire size) per jaw A Body Metallic part Total Protection weight weight weight, g, g, g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA Part numbers Part numbers FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 000 09.0 FECPE. th.,9 mm 000 08.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE.0 0 () 090.0 BJE.0 0 () 090.0 090.0 000 0.00 00 8.0 099. V AC V DC EIP V.CPE D COCE 00 00 00 00 00 00 090.0 000 0.00 00 8.0 099. 8 9 See section on markers marking method Strip marker B-W 090.0 () Other colours, other pole numbers : on request B-W 090.0 0 9 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Terminal blocks displacement Pluggable Feed-through DIN + pluggable + pluggable Spacing, mm.00" D,/.-CPE Spacing, mm.00" D,/.-CPE Black marking to identify wire size. Black marking to identify wire size. Colour Part number D,/.-CPE 090 8. Colour Part number D,/.-CPE 090 8. Mating female plug : Mating female plug : L 00 L 00 End stop th. 9, mm BADL 099 90.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 End section grey() beige() Jumper bar isolation plug kit for jumper bar Locking lever Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 coding peg kit V AC V DC Body Metallic part Total Protection weight weight weight, g,8 g 8, g IP 0 0.0 lb 0.008 lb 0.08 lb NEMA Part numbers Part numbers FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 000 09.0 FECPE. th.,9 mm 000 08.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE.0 0 () 090.0 BJE.0 0 () 090.0 EIP V.CPE D COCE See page 9 See page 9 UL CSA UL CSA NFE DIN NFE DIN 8- AWG 8- AWG wires (same wire size) per jaw wires (same wire size) per jaw 00 00 00 00 00 00 A 090.0 000 0.00 00 8.0 099. V AC V DC, g, g, g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA EIP V.CPE D COCE 00 00 00 00 00 00 A Body Metallic part Total Protection weight weight weight 090.0 000 0.00 00 8.0 099. 8 9 See section on markers marking method Strip marker B-W 090.0 () Other colours, other pole numbers : on request Strip marker B-W 090.0 0 Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Terminal blocks displacement Pluggable Feed-through DIN + pluggable + pluggable Spacing, mm.00" D /.-CPE Spacing, mm.00" D /.-CPE White marking to identify wire size. White marking to identify wire size. Colour Part number Colour Part number D /.-CPE 090 8. D /.-CPE 090 8. Mating female plug : Mating female plug : L 00 L 00 End stop th. 0 mm BADL 099 90.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 End section grey() beige() Jumper bar isolation plug kit for jumper bar Locking lever Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 coding peg kit V AC V DC Body Metallic part Total Protection weight weight weight, g,8 g 8, g IP 0 0.0 lb 0.008 lb 0.08 lb NEMA Part numbers Part numbers FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 000 09.0 FECPE. th.,9 mm 000 08.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE.0 0 () 090.0 BJE.0 0 () 090.0 EIP V.CPE D COCE See page 9 See page 9 UL CSA UL CSA NFE DIN NFE DIN 0 AWG 0 AWG wire per jaw wire per jaw 00 00 00 00 00 00 A 090.0 000 0.00 00 8.0 099. V AC V DC, g, g, g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA EIP V.CPE D COCE 00 00 00 00 00 00 A Body Metallic part Total Protection weight weight weight 090.0 000 0.00 00 8.0 099. 8 9 See section on markers marking method Strip marker B-W 090.0 () Other colours, other pole numbers : on request Strip marker B-W 090.0 0 9 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Pluggable terminal blocks displacement Female plugs Spacing. mm Body : UL9 V0 L 00 L 00 Female plugs Female plugs with brackets Spacing. mm.00 Spacing. mm.00,.00,.00 8,.,.00,.00 8,. L,.88 0,.99 L,.88 0,.0 0,.99 -, mm² -, mm² 8- AWG Part number Spacing. mm body N. Poles L. mm L 0 000. L 0 000.8 L 0 000 0.8 L 0 000 8.0 L 0 000. L 0 000. 8 L 08 000 0.9 9 L 09 000 8.8 0 L 0 000.0 L 000 8.8 L 000 9. L 000 99.0 L 000 0.8 L 000.0 Other pole numbers, consult us. Spacing. mm Part number body N. Poles L. mm L 0 000 8.9 L 0 000. L 0 000.8 L 0 000.80 L 0 000 9. L 0 000.0 8 L 08 000. 9 L 09 000 8.8 0 L 0 000 89.90 L 000 9. L 000 0. L 000. L 000 0.8 L 000 8.00 Other pole numbers, consult us. V A ~ = 00 00 at 0 C Compatible products : Compatible products : wire size, mm² Other characteristics L 00 L 00 L 00 L 00 Wire stripping ecomm. ecomm. Protection IP 0 NEMA Max. working temperature : 00 C resistance : 00 MΩ L 00 L 00 Approvals Part number Coding accessory Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot 8 DIN foot 9 Strip marking 099 0.0 PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 090.0 Part number 099 0.0 PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 090.0 Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Pluggable terminal blocks displacement Female plugs Spacing. mm Body : UL9 V0 L 00 Female plugs with flanges and screws (axis center.) Spacing. mm.00,.00,.00 8,.,.88,.80 L,.00,. 0,.99 Part number Spacing. mm body N. Poles L. mm Part number -, mm² -, mm² 8- AWG L 0 000.9 L 0 000. L 0 000.8 L 0 000 0.80 L 0 000 8. L 0 000.0 8 L 08 000. 9 L 09 000 8.8 0 L 0 000 88.90 L 000 9. L 000 0. L 000. L 000 9.8 L 000.00 Other pole numbers, consult us. V ~ = 00 00 Compatible products : at 0 C A wire size, mm² L 00 Other characteristics Wire stripping ecomm. ecomm. Protection IP 0 NEMA Max. working temperature : 00 C resistance : 00 MΩ Approvals Part number Coding accessory Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot 8 DIN foot 9 Strip marking 099 0.0 PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 090.0 Part number 98 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Pluggable terminal blocks displacement Male plugs Spacing. mm Body : UL9 V0 L 00 L 00 Male plugs Male plugs with brackets Spacing. mm.00 Spacing. mm.00 L,.00,.00 8,. L,.00,.00 8,.,.88 8,. 8,.,.88 8,.,9. 8,. UL -, mm² -, mm² - AWG Part number Spacing. mm body N. Poles L. mm L 0 000. L 0 000.8 L 0 000 0.8 L 0 000 8.0 L 0 000. L 0 000. 8 L 08 000 0.9 9 L 09 000 8.8 0 L 0 000.0 L 000 8.8 L 000 9. L 000 99.0 L 000 0.8 L 000.0 Other pole numbers, consult us. Spacing. mm Part number body N. Poles L. mm L 0 000 9. L 0 000.8 L 0 000.8 L 0 000.0 L 0 000 9. L 0 000. 8 L 08 000.9 9 L 09 000.8 0 L 0 000 80.0 L 000 8.8 L 000 9. L 000 0.0 L 000 0.8 L 000 8.0 Other pole numbers, consult us. V ~ = 00 00 00 Compatible products : Compatible products : at 0 C A wire size, mm² L 00 L 00 Other characteristics Wire stripping ecomm. ecomm. Protection IP 0 NEMA Max. working temperature : 00 C resistance : 00 MΩ Approvals Part number Coding peg Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot 8 DIN foot 9 Strip marking 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 090.0 Part number 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 090.0 Low Products & Systems 99 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Pluggable terminal blocks displacement Male plugs Spacing. mm Body : UL9 V0 L 00 Male plugs with flanges and inserts (axis center.) Spacing. mm.00 L,.00",.00" 8,.,.00",.88 8,. 8,. Part number Spacing. mm body N. Poles L. mm Part number -, mm² -, mm² 8- AWG V A ~ = 00 00 at 0 C L 0 000 8. L 0 000.8 L 0 000.00 L 0 000. L 0 000 9. L 0 000.8 8 L 08 000.8 9 L 09 000 8.0 0 L 0 000 89. L 000 9. L 000 0.9 L 000.8 L 000 0.0 L 000.8 Other pole numbers, consult us. Compatible products : wire size, mm² L 00 Other characteristics Wire stripping ecomm. ecomm. Protection IP 0 NEMA Max. working temperature : 00 C resistance : 00 MΩ Approvals Part number Coding peg Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot 8 DIN foot 9 Strip marking 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 090.0 Part number 00 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Notes Low Products & Systems 0 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Selection table of terminal blocks for railway application wires Selection table According to NFF 808 standard Terminal blocks Y 00 S* according to NFF 9 and NFF 8 standards D,/...NF 099 9.0 D,/..NF 099 0. Terminal block D,/.D..NF D,/8..NF 099. 099.0 (mm²) D,/8..NF 099 9. (mm²) D,/..D.NF 099 9. D,/8.S..NF 099. D /8..NF 099 8., 0,0 0,9 * Max. insulating sleeve :, mm,,8 Legend : allowed wire / or wires per jaw allowed wire / only wire per jaw,, Other wires : please consult us 0 9 ail ail ail PG PZ P CT ail End stop End section Test connector Test socket P BAM V0 FE CE AL 8 8 Test plug FC 9 Jumper bar 0 Jumper bar IP0 less jumper bar Connector plate Shield connector Protection label for protection label BJM BJMI BJ EL CB EP VSP CT Markers (sides of block) Markers (top of block) - Other accessories : see section "" 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ailway applications Terminal blocks with insulation displacement - DIN D,/..NF D,/8..NF Spacing mm (."),.9" Spacing 8 mm (."),.9".0" 8,.9".0" 8,.9".9".9"." ed marking to identify wire size 8." Blue marking to identify wire size End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards 9 8 0 End section beige Circuit separator Test socket Test plug Jumper bar A (without IP0 protection) A A A A less jumper bar A IP0 A orange A A A less jumper bar, A IP0 orange 8 Connector plate 9 Shield connector 0 Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit, A, A, A, A Colour Part numbers Colour Part numbers Beige D,/..NF 099 0. Beige D,/8..NF 099.0 FEMAD SCAD AL AL FC BJM. BJM. BJM. BJM. BJM.0 0 BJE. BJE. BJE. BJE. BJE.0 0 BJ. BJ. BJ. BJ. BJ.0 0 EL CBM CBM8 D NF F -808 NF F -808 8 - AWG wires (same wire size) per jaw 0 - AWG wires (same wire size) per jaw NF F NFE DIN -0 000 V 00 V 00 V Body Metallic part Total Protection weight weight weight, g, g, g IP 0 0.008 lb 0.00 lb 0.0 lb NEMA th. mm mm mm DIA. mm 0, mm 0,8 mm Body Metallic part Total Protection weight weight weight, g, g 9, g IP 0 0.00 lb 0.009 lb 0.00 lb NEMA FEMAD SCAD AL AL AL FC FC BJM 8. BJM 8. BJM 8. BJM 8. BJM 8.0 0 BJE8. BJE8. BJE8. BJE8. BJE8.0 0 EL D NF F NFE DIN -0 000 V 00 V 00 V, A, A 8 A A A A P/N P/N DIA. DIA. th. th. 099 80.0 09 89.00 0 0. 0.00 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 099 9.0 099 9.0 099 9.0 099 9.0 099 0. 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 0. 08. 08. 00 8.0 th. mm DIA. mm DIA. mm DIA. mm DIA. mm DIA. mm 099 80.0 09 89.00 0 0. 0.00 0 0. 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 099.0 099.0 099.0 099.00 099 0. 0. 00 8.0 See section on markers Terminal block's marking C - C0 - TM CAL8 - C80 - TM Low Products & Systems 0 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

ailway applications Terminal blocks with insulation displacement - DIN Spacing 8 mm (.") D /8..NF,.9".0" 8,.9" Spacing 8 mm (.") D,/8..NF,.9".0" 8,.9".9".9" 8." Yellow marking to identify wire size 8." Black marking to identify wire size Colour Part numbers Colour Part numbers End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards 8 9 End section beige Circuit separator Test socket Test plug Assembled jumper bar A (without IP0 protection) A A A A less jumper bar A IP0 orange Connector plate 8 Hand tool kit 9 Semi-automatic tool 0 Pneumatic tool kit eplacement head kit Extraction tool kit A A A A Beige D D /8..NF NF F -808 099 8. AWG wire per jaw NF F NFE DIN -0 000 V 00 V Body Metallic part Total Protection weight weight weight, g, g 9 g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA Beige D,/8..NF NF F -9 NF F -8 AWG wires per jaw NF F NFE DIN -0 000 V 00 V A A A A A A Body Metallic part Total Protection weight weight weight, g, g 9, g IP 0 0.00 lb 0.009 lb 0.00 lb NEMA P/N P/N FEMAD th. mm 099 80.0 FEMAD th. mm 099 80.0 SCAD AL DIA. mm 09 89.00 0 0. AL DIA. mm 0.00 AL DIA. mm 0 0. FC DIA. mm 000 8. FC DIA. mm 0 80.0 BJM 8. 08 0.0 BJM 8. 08. BJM 8. 08. BJM 8. 08. BJM 8.0 0 08 9.00 BJE8. 099.0 BJE8. 099.0 BJE8. 099.0 BJE8. 099.00 BJE8.0 0 099 0. 00 8.0 AL DIA. mm AL DIA. mm AL DIA. mm FC DIA. mm FC DIA. mm BJM 8. BJM 8. BJM 8. BJM 8. BJM 8.0 0 BJE8. BJE8. BJE8. BJE8. BJE8.0 0 EL D 099 9. 0 0. 0.00 0 0. 000 8. 0 80.0 08 0.0 08. 08. 08. 08 9.00 099.0 099.0 099.0 099.00 099 0. 0. 00 8.0 0 See section on markers Terminal block's marking CAL8 - C80 - TM CAL8 - C80 - TM 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ailway applications Double deck terminal block with insulation displacement - DIN D,/.D..NF Spacing mm (.") 9." 8.",.9",.0" ed marking to identify wire size." Colour Part numbers Colour Part numbers Vertical jumper bar assembly (ITVE marker 8) End stop th. 9, mm BAMH V0 V0 09 8.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material UL 9 V0 - IF* * according to NF F -0 and NF F -0 8 End section beige Circuit separator Test socket Test plug Jumper bar A (without IP0 protection) A A A A less jumper bar A IP0 orange Vertical jumper bar 8 Shield connector 9 Hand tool kit 0 Semi-automatic tool Pneumatic tool kit eplacement head kit Extraction tool kit A A A A Beige D,/.D..NF NF F -808 NF F -808 0, -, mm²; 0-8 AWG wires (same wire size) per jaw 8, g 9, g,9 g IP 0 0.09 lb 0.0 lb 0.09 lb NEMA P/N P/N FEDAD SCAD AL () AL () FC BJM. BJM. BJM. BJM. BJM.0 0 BJE. BJE. BJE. BJE. BJE.0 0 ITVE CBDS D NF F NFE DIN -0 800 V 00 V 00 V, A, A 8 A Body Metallic part Total Protection weight weight weight th. mm DIA. mm DIA. mm DIA. mm 099. 099 80.0 09 89.00 0 0. 0.00 000 8. 08. 08. 08 8.0 08 9.00 08 9.0 099 9.0 099 9.0 099 9.0 099 9.0 099 0. 09 9.0 08 08. 00 8.0 NF F NFE DIN -0 Body Metallic part Total Protection weight weight weight 9 0 See section on markers Terminal block's marking C - C0 - TM Low Products & Systems 0 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

ailway applications Heavy duty switch terminal blocks with blade insulation displacement - DIN Spacing mm." D,/.S..NF 8,.0",.8" 8.89" Spacing 8 mm." D,/8.S..NF 8,.0",.8" 8.89"."."."." ed marking to identify wire size Blue marking to identify wire size Colour Part number Colour Part numbers Beige D,/.S..NF 000 08. Beige D,/8.S..NF 099. End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards 00 V NF F -808 NF F -808 0-8 AWG 8 - AWG wires (same wire size) per jaw wires (same wire size) per jaw NF F NF F NFE DIN -0 NFE DIN -0 00 V 00 V 0 A A A,, 8 End section beige Short circuit plug Component holder plug Fuse holder plug for fuses x0 or x Plug extractor less jumper, A bar IP0 orange Hand tool kit 8 Semi-automatic tool 9 Pneumatic tool kit 0 eplacement head kit Extraction tool kit, A, A, A, A Body Metallic part Total Protection weight weight weight,8 g, g, g IP 0 0.0 lb 0.00 lb 0.0 lb NEMA P/N FEDAD BNC BNSV BNSV- BNF th. th. th. th. th. EXBN BJ. BJ. BJ. BJ. BJ.0 0 D mm mm mm mm mm 099 80.0 09 8. 09 8. 000.0 0 998. 0 08.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 00 8.0 Body Metallic part Total Protection weight weight weight,8 g, g, g IP 0 0.0 lb 0.00 lb 0.0 lb NEMA FEDAD BNCT8 BNSV8 BNF EXBN D th. th. th. mm 8 mm 8 mm th. 8 mm P/N 099 80.0 09 9.0 09 9.0 09 9.0 0 08.0 00 8.0 0 9 See section on markers Terminal block's marking C - C0 CAL8 - C80 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ailway applications Terminal block with insulation displacement Component holder - DIN D,/..D.NF Spacing mm (."),.9".0" 8,.9".9"." ed marking to identify wire size Colour Part numbers Colour Part numbers End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards End section beige less jumper bar, A IP0, A, A, A, A Shield connector Hand tool kit Semi-automatic tool Pneumatic tool kit eplacement head kit 8 Extraction tool kit Beige D,/..D.NF 099 9. Block equipped with one N08 diode FEDAD BJ. BJ. BJ. BJ. BJ.0 0 CBM CBM8 D 0-8 AWG wires (same wire size) per jaw 80 V A NF F -808 NF F -808 NF F NFE DIN -0 Body Metallic part Total Protection weight weight weight NF F NFE DIN -0, g, g,0 g IP 0 0.00 lb 0.00 lb 0.0 lb NEMA P/N P/N th. mm th. 0, mm th. 0,8 mm 099 80.0 00 9.0 00 9.0 00 9.00 00 9.0 00 98. 08. 08. 00 8.0 Body Metallic part Total Protection weight weight weight 8 See section on markers Terminal block's marking C - C0 Low Products & Systems 0 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

ailway applications Terminal blocks displacement Pluggable Feed-through - pluggable DIN - pluggable Spacing, mm.00" D,/.-CPE.NF Spacing, mm.00" D,/.-CPE.NF ed marking to identify wire size. ed marking to identify wire size. Colour Part number Colour Part number Beige D,/.-CPE.NF 000.0 Beige D,/.-CPE.NF 000.00 Mating female plug : Mating female plug : End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards L 00 L 00 NF F -808 NF F -808 0, -, mm² ; 0-8 AWG 0, -, mm² ; 0-8 AWG wires (same wire size) per jaw wires (same wire size) per jaw NF F NFE DIN -0 NF F NFE DIN -0 00 V 00 V 00 V 00 V 8 A A 8 A A End section beige() grey() Jumper bar isolation plug kit for jumper bar Locking lever Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 coding peg kit Body Metallic part Total Protection weight weight weight, g,8 g 8, g IP 0 0.0 lb 0.008 lb 0.08 lb NEMA Part numbers Part numbers FECPE. th.,9 mm 000 09.0 FECPE. th.,9 mm 000 08.0 FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 09 8. BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE.0 0 () 090.0 BJE.0 0 () 090.0 EIP V.CPE D COCE 090.0 000 0.00 00 8.0 099. Body Metallic part Total Protection weight weight weight, g, g, g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA EIP V.CPE D COCE 090.0 000 0.00 00 8.0 099. 8 9 See section on markers marking method Strip marker B-W 090.0 () Other colours, other pole numbers : on request Strip marker B-W 090.0 0 08 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ailway applications Terminal blocks displacement Pluggable Feed-through - pluggable DIN - pluggable Spacing, mm.00" D,/.-CPE.NF Spacing, mm.00" D,/.-CPE.NF Blue marking to identify wire size. Blue marking to identify wire size. Colour Part number Colour Part number Beige D,/.-CPE.NF 000 0.0 Beige D,/.-CPE.NF 000 0.0 Mating female plug : Mating female plug : End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards L 00 L 00 NF F -808 00 V 00 V NF F -808 0,9 -, mm²; 8 - AWG 0,9 -, mm²; 8 - AWG wires (same wire size) per jaw wires (same wire size) per jaw NF F NFE DIN -0 NF F NFE DIN -0 00 V 00 V A A A A End section beige() grey() Jumper bar isolation plug kit for jumper bar Locking lever Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 coding peg kit Body Metallic part Total Protection weight weight weight, g,8 g 8, g IP 0 0.0 lb 0.008 lb 0.08 lb NEMA Part numbers Part numbers FECPE. th.,9 mm 000 09.0 FECPE. th.,9 mm 000 08.0 FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 09 8. BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE.0 0 () 090.0 BJE.0 0 () 090.0 EIP V.CPE D COCE 090.0 000 0.00 00 8.0 099. Body Metallic part Total Protection weight weight weight, g, g, g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA EIP V.CPE D COCE 090.0 000 0.00 00 8.0 099. 8 9 See section on markers marking method Strip marker B-W 090.0 () Other colours, other pole numbers : on request Strip marker B-W 090.0 0 Low Products & Systems 09 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

ailway applications Terminal blocks displacement Pluggable Feed-through DIN - pluggable - pluggable Spacing, mm.00" D,/.-CPE.NF D,/.-CPE.NF Spacing, mm.00" Black marking to identify wire size. Black marking to identify wire size. Colour Part number Colour Part number Beige D,/.-CPE.NF. 000.0 Beige D,/.-CPE.NF 000.0 Mating female plug : Mating female plug : End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards L 00 L 00 NF F -9 NF F -8 00 V 00 V NF F -9 NF F -8, mm²; AWG, mm²; AWG wires per jaw wires per jaw NF F NFE DIN -0 NF F NFE DIN -0 00 V 00 V A A A A End section beige() grey() Jumper bar isolation plug kit for jumper bar Locking lever Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 coding peg kit Body Metallic part Total Protection weight weight weight, g,8 g 8, g IP 0 0.0 lb 0.008 lb 0.08 lb NEMA EIP V.CPE D COCE Body Metallic part Total Protection weight weight weight, g, g, g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA Part numbers Part numbers FECPE. th.,9 mm FECPE. th.,9 mm BJE. () BJE. () BJE.0 0 () 000 09.0 09 8. 090.0 090.0 090.0 090.0 000 0.00 00 8.0 099. FECPE. th.,9 mm FECPE. th.,9 mm BJE. () BJE. () BJE.0 0 () EIP V.CPE D COCE 000 08.0 09 8. 090.0 090.0 090.0 090.0 000 0.00 00 8.0 099. 8 9 See section on markers marking method Strip marker B-W 090.0 () Other colours, other pole numbers on request Strip marker B-W 090.0 0 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ailway applications Terminal blocks displacement Pluggable Feed-through - pluggable DIN - pluggable Spacing, mm.00" D /.-CPE.NF Spacing, mm.00" D /.-CPE.NF Yellow marking to identify wire size. Yellow marking to identify wire size. Colour Part number Colour Part number Beige D /.-CPE.NF 000 0. Beige D /.-CPE.NF 000. Mating female plug : Mating female plug : End stop th. 9, mm BAM V0 V0 099 0.0 End stop th. 0 mm BAM V0 V 099 9.0 ail x, x P.Z 0 00. ail x x, P 08 00. ail x x, P 08 00. Other end stops, rails and accessories : see section on accessories. Notes Body material is UL 9 V0 - IF* * According to NF F -0 and NF F -0 standards NF F -808, mm²; AWG Only one wire per jaw NF F NFE DIN -0 00 V 00 V L 00 L 00 NF F -808, mm²; AWG Only one wire per jaw NF F NFE DIN -0 00 V 00 V A A A A End section beige() grey() Jumper bar isolation plug kit for jumper bar Locking lever Hand tool kit Semi-automatic tool Pneumatic tool kit 8 eplacement head kit 9 Extraction tool kit 0 coding peg kit Body Metallic part Total Protection weight weight weight, g,8 g 8, g IP 0 0.0 lb 0.008 lb 0.08 lb NEMA Part numbers Part numbers FECPE. th.,9 mm 000 09.0 FECPE. th.,9 mm 000 08.0 FECPE. th.,9 mm 09 8. FECPE. th.,9 mm 09 8. BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE. () 090.0 BJE.0 0 () 090.0 BJE.0 0 () 090.0 EIP V.CPE D COCE 090.0 000 0.00 00 8.0 099. Body Metallic part Total Protection weight weight weight, g, g, g IP 0 0.0 lb 0.0 lb 0.0 lb NEMA EIP V.CPE D COCE 090.0 000 0.00 00 8.0 099. 8 9 See section on markers marking method Strip marker B-W 090.0 () Other colours, other pole numbers : on request Strip marker B-W 090.0 0 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

ailway applications Female plugs displacement Body : UL9 V0 - IF * L 00 L 00 Female plugs Spacing. mm.00 Spacing. mm.00 Female plugs with brackets,.00,.00 8,.,.00,.00 8,. L,.88 0,.99 L,.88 0,.0 0,.99 Part number Part number * according to NF F -0 and NF F -0 standards NF F -808 0,9 -, mm² 8 - AWG Spacing. mm Beige colour N. Poles L. mm L 0 8. L 0 8.8 L 0 8 0.8 L 0 8 8.0 L 0 8. L 0 8. 8 L 08 8 0.9 9 L 09 8 8.8 0 L 0 8.0 L 8 8.8 L 8 9. L 8 99.0 L 8 0.8 L 8.0 Other pole numbers, consult us. Spacing. mm Beige colour N. Poles L. mm L 0 8 8.9 L 0 8. L 0 8.8 L 0 8.80 L 0 8 9. L 0 8.0 8 L 08 8. 9 L 09 8 8.8 0 L 0 8 89.90 L 8 9. L 8 0. L 8. L 8 0.8 L 8 8.00 Other pole numbers, consult us. ~ 00 V = 00 at 0 C A Compatible products : Compatible products : Insulaton displacement pluggable terminal blocks displacement male plug wire size, mm² Other characteristics Weight per point, standard Body Metal part Total Protection weight weight weight, g, g, g IP 0 0.00 lb 0.00 lb 0.00 lb NEMA Max. working temperature : 00 C resistance : 00 MΩ : D,/.-CPE.NF D,/.-CPE.NF D,/.-CPE..NF D,/.-CPE..NF D /.-CPE.NF D /.-CPE.NF D,/.-CPE.NF D,/.-CPE.NF displacement male plug L 00 L 00 Approvals Part number Coding accessory Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot grey 8 DIN foot grey 9 Strip marking 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 B- W 090.0 Part number 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 B- W 090.0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ailway applications Female plugs displacement Body : UL9 V0 - IF * L 00 Female plugs with flanges and M. screw (axis center.) Spacing. mm.00,.00,.00 8,.,.88,.80 L,.00,. 0,.99 Part number Part number Spacing. mm Beige Colour N. Poles L. mm * according to NF F -0 and NF F -0 standards NF F -808 0,9 -, mm² L 0 8.9 L 0 8. L 0 8.8 L 0 8 0.80 L 0 8 8. L 0 8.0 8 L 08 8. 9 L 09 8 8.8 0 L 0 8 88.90 L 8 9. L 8 0. L 8. L 8 9.8 L 8.00 Other pole numbers, consult us. ~ 00 V = 00 at 0 C A wire size, mm² Other characteristics Weight per point, standard Body Metal part Total Protection weight weight weight, g, g, g IP 0 0.00 lb 0.00 lb 0.00 lb NEMA Max. working temperature : 00 C resistance : 00 MΩ : displacement male plug Compatible products : L 00 Approvals Part number Coding accessory Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot grey 8 DIN foot grey 9 Strip marking 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 B- W 090.0 Part number Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

ailway applications Male plugs displacement Body : UL9 V0 - IF * L 00 L 00 Male plugs Male plugs with brackets Spacing. mm.00 Spacing. mm.00 L,.00,.00 8,. L,.00,.00 8,.,.88 8,. 8,.,.88 8,.,9. 8,. * according to NF F -0 and NF F -0 standards NF F -808 0,9 -, mm² 8 - AWG Part number Spacing. mm Beige color N. Poles L. mm L 0 8. L 0 8. L 0 8 0.8 L 0 8 8.00 L 0 8. L 0 8. 8 L 08 8 0.8 9 L 09 8 8.8 0 L 0 8.0 L 8 8. L 8 9. L 8 99.9 L 8 0.8 L 8.0 Other pole numbers, consult us. Spacing. mm Part number Beige color N. Poles L. mm L 0 8 9. L 0 8.8 L 0 8.8 L 0 8.0 L 0 8 9. L 0 8. 8 L 08 8.9 9 L 09 8.8 0 L 0 8 80.0 L 8 8.8 L 8 9. L 8 0.0 L 8 0.8 L 8 8.0 Other pole numbers, consult us. ~ 00 V = 00 at 0 C A wire size, mm² Compatible products : Compatible products : displacement displacement female plug female plug L 00 L 00 Other characteristics Weight per point, standard Body Metal part Total Protection weight weight weight, g, g, g IP 0 0.00 lb 0.00 lb 0.00 lb NEMA Max. working temperature : 00 C resistance : 00 MΩ : Approvals Part number Coding peg Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot grey 8 DIN foot grey 9 Strip marking 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 B- W 090.0 Part number 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 B- W 090.0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

ailway applications Male plugs displacement Body : UL9 V0 - IF * L 00 Male plugs with flanges and inserts (axis center.) Spacing. mm.00 L,.00",.00" 8,.,.00",.88 8,. 8,. Part number Part number Spacing. mm Beige colour N. Poles L. mm * according to NF F -0 and NF F -0 standards NF F -808 0,9 -, mm² 8 - AWG L 0 8 8. L 0 8.8 L 0 8.00 L 0 8. L 0 8 9. L 0 8.8 8 L 08 8.8 9 L 09 8 8.0 0 L 0 8 89. L 8 9. L 8 0.9 L 8.8 L 8 0.0 L 8.8 Other pole numbers, consult us. ~ 00 V = 00 at 0 C A wire size, mm² Compatible products : displacement female plug L 00 Other characteristics Weight per point, standard Body Metal part Total Protection weight weight weight, g, g, g IP 0 0.00 lb 0.00 lb 0.00 lb NEMA Max. working temperature : 00 C resistance : 00 MΩ : Approvals Part number Coding peg Cable clamp plug grey - Cable clamp plug grey - 8 Manual tool Semi-automatic tool Pneumatic tool DIN foot grey 8 DIN foot grey 9 Strip marking 099. PT, mm L 99 00.000 PT, mm L 99 00.000 D L 99 90 00.000 L 99 9 00.000 B- W 090.0 Part number Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

TOOLS PESENTATION PNEUMATIC TOOL KIT This kit includes extraction tool. Fastening ring for balancer Handle Body Head Extraction ferrule D Pneumatic tool installation Technical information - Energy : lubricated compressed air. - Air pressure : PSI. - Lubrication BY F..L. (Filter, egulator, Lubricator) ( oil drop every 0 operations) - Compressed-air supply : standard pipe DIA. mm. - Connection of the pipe to the tool by quick release coupling (integrated into the tool). - Min. nb of operations : 000 000 - Dimensions : Lg : mm x DIA. mm. - Weight : g. emove the protective plug from the compressed air inlet. Insert the clean cut pipe without special preparation into the dedicated hole and push in fully. Hang the toll on a balancer. Quick release coupling in accordance with your installation (not provided). For more information, contact your entrelec local agent. Warranty of the tool : year in standard use (except disassembling of the tool's body by customer). SEMI-AUTOMATIC TOOL SIMPLIFIED TOOL Head on 0 pivot Wire cutting tool Insertion tool Extraction tool Delivered with simplified tool : Detachable interchangeable head Wire extractor Quick-connect fixing Trigger EXAD 08. Hole to cut the wire Adhesive side Min. nb of operations : 00 000 Min. nb of operations : 00 INSTUCTION FO USE Allows connection of two wires of the same gauge and type (solid or stranded) one by one. A - Connection of the first wire EPLACEMENT OF THE HEAD Pneumatic tool : Introduce the wire. Apply the tool head to the upper opening without forcing its self-alignment device (the tool must be at right angle with the block). Operate the handle directly in line with the tool to release a connect cycle. Unstripped wire Semi-automatical tool : Introduce the wire. Apply the tool head to the upper opening without forcing its self-alignment device (the tool must be at right angle with the block). Press the trigger all the way. elease the trigger to disengage the tool. Unstripped wire Safety : This tool must be operated only when positioned on the terminal block. Simplified tool : Introduce the wire. Place the tool into the upper opening, push the wire home. B - Connection of the second wire : same as for the first wire. C - Extraction of wires Place the hook of the extractor under the wire into the slot of the terminal block. Slide the wires outside while securing firmly the block. emove the first wire. epeat operations above for a second wire. NOTE : Wire must be cut clean before reconnecting it to the terminal block. eplacement head kit 00 8.0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Test connectors - C - TM - TGA. : Assembly rod for lever P/N. : 00. Width : mm DIA. : mm End module To perform simple tests quickly This connector completes the range of modular connectors to be mounted on terminal block assembly. Contact is made on top of the jaw. Hooking is made on the wire input of terminal blocks. It can be achieved without modifying the assembly. Building a test connector,.,. N CE... modules 9,.0 This end module is the same for any unitary module spacing :, or 8 mm. All modules joint together using dog points. A connector can be made of 0 max. The assembly rod for levers (TGA.) cut at the convenient length is advised for connectors >. Test connectors on jaw for terminal blocks CE. CE. CE.8 Spacing mm (.9") Spacing mm (.") Spacing 8 mm (.") P/N P/N P/N Black body Unitary module CE. Black body End module CEE 099. CE. 099. CE.8 099 8. 099. Black body Unitary module Black body End module CEE Black body Unitary module Black body End module 099. CEE 099. clamp CEI 9-- UL CSA CEI 9-- UL CSA CEI 9-- UL CSA NF.EN 09 - VDE 0 NF.EN 09 - VDE 0 NF.EN 09 - VDE 0 0, - 0, mm² 0, - 0, mm² 0, - 0, mm² 0, - 0, mm² 0, - 0, mm² 0, - 0, mm² voltage V = /~ 0 V 00 V 00 V current A A A A Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

End stops The end stops are mounted at the extremity of the terminal board assembly, giving additional support to the terminal blocks. For various types of marking, refer to the marker section. BADL BAMH BADL BAM BADH BA Description Order P/N Packaging End stop DIN grey V0 BADL 9 mm 099 90.0 0 End stop with screws DIN light grey V0 BAM V0 0 mm 099 9.0 0 grey V BAM 0 mm 00. 0 beige V0 BAM V0 0 mm 09.00 0 High end stop with screws DIN and DIN grey BAMH 9. mm 0 8.00 0 beige V0 BAMH V0 9. mm 09 8.0 0 High end stop with screws DIN grey BADH mm 0 900. 0 End stop for miniblocks DIN grey V0 BADL. mm 099 0. 0 eversible end stop DIN beige BA 0 mm 0 9. 0 P0 P P.Z P.Z P Mounting rails Symmetrical white passivated P0 m 00 08.0 galvanized steel prepunched rail P0 m 0 0.0 Symmetrical white passivated P.Z m 00.0 galvanized steel rail P.Z m 0 00. Symmetrical white passivated P m 00. galvanized steel rail P m 08 00. Symmetrical white passivated P m 00. galvanized steel rail P m 08 00. Asymmetrical white passivated P.Z m 00 9. galvanized steel rail P.Z m 0 00.0 Symmetrical white passivated P m 00.00 steel prepunched rail Extruded aluminum 90 m XUS00 90 m XUS00 0 m XUS00 0 m XUS008 P.Z H90 ALU P.Z H0 ALU FC Test devices Test plug DIA. mm Test plug DIA. mm Test socket DIA. mm for screw clamp/ up to 8 mm spacing one deck double deck Test socket DIA. mm for screw clamp blocks 8, 0, mm spacing FC 000 8. 0 FC 0 80.0 0 AL 0 0. 0 AL 0 00.00 0 AL 0.0 0 FC Shield connectors AL CB... AL For blocks : screw clamp MA,/ ; MA,/.SNB ; M / MA,/.D ; M /.D spring clamp D,/.L ; D,/.I.L ; D,/.I.L ; D,/.SNBT.L D /. ; D,/. ; D,/. ; D /. D,/.SN. ; D /.SN. D /.SNT. ; D,/.SNT. D /.D. ; D,/.D. CBM 08. 0 CBMD 0 0. 0 CBD.L 09 0. 0 CBM 08. 0 CBD 09.0 CBD 09.0 0 CBDS 08 08. 0 SFB.B... Shield terminals for collector bar DSPBO.PI DSPBO.P Shield terminals for collector bar Shield diameter, -, - 0 - - Collector bar 8 x x 000 mm Bar holder (isolated from ground) Bar holder (connected to the mounting rail) SFB.B 00 0. 0 SFB.B 00.0 0 SFB.B 00.0 0 SFB.B 00.0 0 BO 8 00.0 0 DSPBO.PI 00.0 0 DSPBO.P 00.0 0 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Marking Marking for terminal blocks / & / Selection table Markers for blocks : C0 C 0 C0 C80 C00 C C CAL8 mm mm emove one of the side bands of the card. 8 mm 0 mm mm Separate the chosen strip from the rest of the card. Possible mounting : ecommended mounting : Impossible mounting : Press the first marker in place, hold it and slide your thomb on the rest of the strip. Horizontal marking Vertical marking Low Products & Systems 9 ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Marking (cont.) Marking for terminal blocks Standard C marker cards (x) = Nb of cards (x) = Nb of cards (x) = Nb of cards (x) = Nb of cards in mm spacing kit in mm spacing kit in mm spacing kit in mm spacing kit Marker sizes C0 C C0 C C0 C80 C00 Blank cards 09 000. 00 000. 0 000.0 0 000.00 0 000.0 0 000.0 08 000. Horizontal marking 0 strips from to 0 09 00.0 00 00.00 () 0 00. () 0 00. () 0 00. () 0 00.0 to 8 08 00.0 0 strips from to 0 09 00.0 00 00.0 () 0 00. (0) 0 00. () 0 00.0 (0) 0 00. 9 to 08 00.0 0 strips from to 0 09 00.0 00 00.0 0 00. () 0 00.0 0 00. () 0 00. to 08 00.0 0 strips from to 0 09 00.0 00 00.0 0 00.0 () 0 00. 0 00. () 0 00. to 08 00.0 0 strips from to 0 09 00.0 00 00.0 0 00. () 0 00. 0 00. () 0 00. to 0 08 00.00 0 strips from to 0 09 00.00 00 00.0 0 00. () 0 00. 0 00. () 0 00. to 8 08 00.0 0 strips from to 0 09 008. 00 008. 0 008.0 () 0 008.0 0 008.0 () 0 008.0 9 to 08 008. From to 00 09 00.0 00 00.0 () 0 00. () 0 00. () 0 00. () 0 00. to 80 08 00.0 From 0 to 00 09 0. 00 0. 0 0. () 0 0. 0 0. () 0 0. 8 to 0 08 0.0 0 times L-L-L-N-PE 00. 0. 0. 0. () Vertical marking 0 strips from to 0 09 0.0 00 0.0 0 0. () 0 0. 0 0. () 0 0. to 8 08 0.0 0 strips from to 0 09 0.0 00 0.0 0 0. () 0 0. 0 0. () 0 0. 9 to 08 0.0 0 strips from to 0 09 0.0 00 0.00 0 0. () 0 0. 0 0. () 0 0.0 to 08 0.0 0 strips from to 0 09 0.0 00 0.0 0 0. () 0 0. 0 0.0 () 0 0. to 08 0.0 From to 00 09 00.0 00 00. 0 00.0 (8) 0 00.0 0 00.0 (8) 0 00.0 to 80 08 080.0 0 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Marking (cont.) Marking systems Marking table Marking system computer assisted. Description Order P/N Packaging Complete plotter kit AMS 00 XUSP0 Kit includes: Plotter, Model AMS00 Software on CD Template for 8 C/CT marker cards Plotter pen (. mm) Ink cartridges Cleaning cartridges Cleaner waste bottle Marking table Other available accessories Description Order P/N Packaging Ink cartridges () XUSP0 Plotter pen ink (0 ml bottle) XUSP00 Cleaning cartridge () XUSP0 Plotter pen cleaning fluid (0 ml bottle) XUSP0 Cleaner waste bottle XUSP09 Plotter pen (.8mm) XUSP0 Plotter pen (.mm) XUSP0 Plotter pen (.mm) XUSP0 Plotter pen (.0mm) XUSP0 Plotter pen (.0mm) XUSP08 Plotter pen (.00mm) XUSP09 Disposable pen (.mm) XUSP089 Disposable pen (.mm) XUSP080 C/CT template (8 cards) XUSP0 TM /9 template XUSP08 PB- template (PCB strips) XUSP00 Pads for C/CT template XUSP09 Pads for TM template XUSP00 Templates Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Notes Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Alphanumeric Part number index... - Alphabetical index... Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Part Numbers 000 8. 099 00. Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No. 000 8. 8 0008 09.0 0008 09. 0008 098.0 0008 88. 0 09.0 8 0 00.00 0 0 0.0 8 0. 0 0. 8 099 0. 099 08.0 9 099 00.0 9 099 0. 099 0. 099 8. 099 9. 0 099 80.0 0 099 8. 0 099 8. 00 8.0 00 9.0 00 9.0 0 00.0 0 0. 0 0 00. 0 0 00.0 0 0 00. 0 0008 89. 0008 90. 0008 9.00 0008 9.0 00 08.0 8 0. 8 0 888.0 0 00. 8 0. 8 0 8.0 0 099 0.0 099 0. 099 0. 099 0. 099 09.0 099 8. 8 099 8. 8 099 8. 8 099 8. 8 099 8.0 8 00 9.0 00 98. 00 9.0 00 9.0 00 9.0 0 00. 0 0 00. 0 0 00. 0 0 008.0 0 0 00. 0 00.0 8 00. 8 00. 8 00. 8 00 9. 8 0 8. 8 0 8. 0 0 8.0 8 0 89.0 0 0 89. 099 00.0 099 0.0 099 0. 099 0. 099 0. 9 099 88.0 8 099 89.0 8 099 90.0 8 099 0.0 0 099 0.0 9 00 9.0 8 00 9.0 8 00 9.00 8 00 9.0 8 00 98. 8 0 0. 0 0 0. 0 0 0. 0 0 0. 0 0 0.0 0 00.00 8 00 08. 00 9.0 0.0 0. 0 89. 0 89.0 0 89. 0 89. 0.0 099 09.00 8 099 00.0 8 099 0. 8 099 0. 0 099 0. 0 099. 9 099.0 099 8.0 099 9.0 099.0 9 00 99. 8 00. 00. 8 09 00.0 0 09 00.0 0 0 00.0 0 0. 0 0 00.0 0 0 00. 0 0 00. 0 0. 8 0 8. 8 0 0. 0 0.0 8 0 8.00 8 0.0 0.0 0.0 0.0 0 8. 099 0. 9 099 0. 0 099 0. 0 099 0.0 0 099 08.0 9 099.0 9 099.00 9 099.0 9 099.0 099.0 09 00.0 0 09 00.0 0 09 00.0 0 09 00.00 0 09 008. 0 0 00. 0 0 00. 0 0 00. 0 0 008.0 0 0 00. 0 0.0 8 0.0 8 0 8. 0 0 9.0 0 0 0. 0 0 9. 0 80.0 0 8. 0 8. 0.00 8 099 080.0 099 08. 099 08. 099 08. 099 08. 099 8. 099. 099 0. 9 099. 099. 09 00.0 0 09 0. 0 09 0.0 0 09 0.0 0 09 0.0 0 0 0. 0 0 0. 0 0 0. 0 0 0.0 0 0 0. 0 0. 8 0 900. 0 998. 0 0 0. 8 0 0. 0.0 8 0.0 8 0.0 8 0.0 8 0 9. 0 099 088. 099 089. 099 09. 099 09.0 099 098. 099.0 80 099. 80 099. 099. 099. 80 09 0.0 0 09 00.0 0 00 00.00 0 00 00.0 0 00 00.0 0 0 00.0 0 08 00.0 0 08 00.0 0 08 00.0 0 08 00.0 0 0 00.0 8 0 00.00 8 0 0. 0 0.00 8 0.0 8 0 0. 0 0.00 0 0.0 0 0.0 0 0 0.0 8 099 0. 099 08.0 099 8. 9 099. 099 8. 099. 80 099. 099 8. 099 9.0 88 099 0.0 88 00 00.0 0 00 00.0 0 00 00.0 0 00 008. 0 00 00.0 0 08 00.00 0 08 00.0 0 08 008. 0 08 00.0 0 08 0.0 0 0. 0. 0 0. 8 0 8.0 0 0. 8 0.0 08 08. 08. 08. 8 08. 099 9. 099 0.00 099. 099. 0 099.0 8 099. 099 80. 8 099 8. 8 099 8. 8 099 9.0 9 00 0. 0 00 0.0 0 00 0.0 0 00 0.00 0 00 0.0 0 08 0.0 0 08 0.0 0 08 0.0 0 08 0.0 0 08 080.0 0 0 80.0 0 0. 0 9. 8 0 00. 9 0. 09.0 8 09.0 8 09.0 8 099. 8 099. 8 099 8.0 099. 099 8. 099.0 8 099 8. 8 099.0 099. 099. 00 00. 0 00. 0 0 00. 0 0 00. 0 0 00. 0 090.0 9 090.0 9 090.0 9 090.0 9 090.0 9 0. 0 8.0 0 9.0 0 0.0 0 80.0 8 09.0 8 09 9.0 09 89. 09 880.0 09 8.0 8 099 8. 099 8. 099 8. 099 88. 099 89. 099. 099. 099 8.0 099 9.00 099 0.0 0 00.0 0 0 00. 0 0 00. 0 0 008.0 0 0 00. 0 090 8. 9 090 8. 9 090 8. 9 090 8. 9 090 8. 9 08 00. 08. 8 08. 8 08 8.0 8 08 9.00 8 09 8. 09 8. 09 89.00 9 09 9.0 09 9.0 099 08. 099 09. 099 0.0 099. 099 9.0 099. 099. 099. 9 099. 9 099. 9 0 0. 0 0 0. 0 0 0. 0 0 0. 0 0 0. 0 090 8.0 9 09 0. 8 09 8. 9 09 8. 9 09 8. 08 0.0 0 08. 0 08. 0 08. 0 08 0. 8 09 9.0 09 9. 09 9. 09 998. 09 999. 099. 8 099.0 8 099. 8 099. 099. 099. 9 099.0 9 099 8.0 9 099 9.0 9 099 0.0 9 0 00.0 0 0. 0 0 00. 0 0 00. 0 0 00.0 0 09 09.0 09.00 8 099 8. 099 89.0 099 90.0 08 9. 08. 08. 08. 08. 099 0. 8 099 0. 8 099 0.0 8 099 08. 9 099 09. 8 099.0 099.0 099.0 099.0 099 8.0 8 099. 0 099 90. 099 9. 8 00 0. 8 00.0 8 0 00. 0 0 00. 0 0 00. 0 0 008.0 0 0 00. 0 099 9. 099 9. 099 9. 099 9. 099 9. 08 00. 08 9.0 08 9.0 8 08 9.00 0 0 08.0 099 00.0 8 099 0. 0 099 0. 0 099 0. 0 099 0.0 8 099 9. 8 099.0 099.0 9 099.0 9 099.0 9 00.0 8 00.0 8 00.0 8 00.0 8 00.0 8 0 0. 0 0 0. 0 0 0. 0 0 0. 0 0 0. 0 099 9. 099 9. 80 099 98.00 80 099 99.0 80 099 00. 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Part Numbers 099 0.0 XUSP080 Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No. Part No. Page No. 099 0.0 8 099 0.0 8 099 0.0 8 099 0.0 8 099 0.0 099 8. 0 099 0.00 8 099 0.0 8 099 08. 8 099 09. 8 099 8.0 0 099 8.0 099 8.0 0 099 8.00 0 099 8.0 0 L 0 000 L 0 000 9 L 0 000 L 0 000 9 L 0 000 L 000 9 L 000 L 000 98 L 000 L 99 90 00.000 9 L 000 L 000 99 L 000 L 000 00 L 000 099 0.00 099 0.0 099 08. 099 09. 099 0.0 099 0.0 8 099. 8 099. 8 099. 8 099. 8 099 88. 0 099 89. 099 90.0 099 9.0 099 9.0 L 0 000 98 L 0 000 L 0 000 9 L 0 000 L 0 000 9 L 99 9 00.000 9 L 99 00.000 9 L 99 00.000 9 L 0 000 99 L 0 000 L 000 99 L 000 L 000 99 L 000 L 000 00 099. 099. 099. 88 099. 88 099.0 88 099.0 8 099. 89 099. 89 099 8.0 89 099 9.0 90 099 9.0 099 9.00 099 0. 0 099 08. 0 099 09. 0 L 0 000 L 0 000 98 L 0 000 L 0 000 9 L 0 000 L 0 000 99 L 0 000 L 0 000 00 L 0 000 L 0 000 99 L 000 L 000 99 L 000 L 000 99 L 000 099. 90 099. 89 099 8.0 89 099 9.0 89 099 0.0 90 099 0.0 9 099. 9 099. 9 099.0 9 099. 099 0. 0 099.0 0 099. 0 099 8. 0 099 9. 0 L 0 000 9 L 0 000 L 0 000 98 L 0 000 L 0 000 9 L 0 000 L 0 000 99 L 0 000 L 0 000 00 L 0 000 L 000 00 L 000 XUS00 8 XUS00 8 XUS00 8 099. 099. 099.0 099. 8 099. 099. 099. 099 8.0 099 9.00 099 0. 099. 0 099. 9 099 8. 099. 9 099. 9 L 0 000 L 0 000 9 L 0 000 L 0 000 98 L 0 000 L 0 000 99 L 0 000 L 0 000 99 L 0 000 L 0 000 00 XUS008 8 XUSP0 XUSP0 XUSP0 XUSP0 099. 099. 099 8.0 8 099. 9 099. 9 099.0 8 099.0 8 099.0 8 099.0 099.0 8 099. 099.0 0 099 9. 0 099. 0 099. L 0 000 9 L 0 000 L 0 000 9 L 0 000 L 0 000 98 L 0 000 L 0 000 99 L 0 000 L 0 000 99 L 0 000 XUSP09 XUSP08 XUSP09 XUSP0 XUSP0 099. 9 099. 9 099. 9 099.0 9 099.0 0 099 9. 8 099 9. 8 099 9. 8 099 9.0 8 099 9. 8 099 8. 099 80. 8 099 8.0 8 099 8.0 8 099 8.0 L 0 000 L 08 000 9 L 08 000 L 08 000 9 L 08 000 L 0 000 00 L 0 000 L 0 000 99 L 0 000 L 0 000 99 XUSP00 XUSP0 XUSP0 XUSP089 XUSP080 099.0 8 099.00 8 099.0 099.0 099 8. 80 099 9. 80 099 9. 80 099 98.0 80 099 99.0 8 099 00. 80 099 8.0 099 9.0 099 9.0 099 9.0 099 800. L 08 000 98 L 08 000 L 09 000 9 L 09 000 L 09 000 9 L 0 000 L 0 000 00 L 0 000 L 0 000 99 L 0 000 099 9. 8 099.0 099.0 8 099 8.0 099 00.0 9 099 0.0 88 099 0.00 88 099 0.0 88 099 0.0 90 099 0.0 9 099 80.0 099 80.0 0 099 80.0 0 099 80.0 0 099 89. L 09 000 L 09 000 98 L 09 000 L 0 000 9 L 0 000 L 0 000 99 L 0 000 L 0 000 00 L 0 000 L 08 000 99 099 0. 099 8. 8 099 8. 099.0 9 099.0 9 099 0.0 9 099 0.0 9 099 08. 9 099 09. 9 099 0.0 9 099 89. 099 90.0 8 099 9. 0 099 9. 9 099 9. L 0 000 9 L 0 000 L 0 000 98 L 0 000 L 000 9 L 08 000 L 08 000 99 L 08 000 L 08 000 00 L 08 000 099.0 0 099 8. 9 099 9. 9 099 0. 9 099.0 099.0 9 099. 099. 9 099. 099. 099 99.0 099 90. 099 9.00 099 9.0 8 099 9.0 0 L 000 L 000 9 L 000 L 000 98 L 000 L 09 000 99 L 09 000 L 09 000 99 L 09 000 L 09 000 00 099.00 099.0 099.0 099.0 099.0 099. 099. 099 8.0 099 9.00 099 0.0 000 08.0 9 000 09.0 9 000 0.00 9 000 08. 0 000 08. 9 L 000 9 L 000 L 000 9 L 000 L 000 98 L 09 000 L 0 000 99 L 0 000 L 0 000 99 L 0 000 099.0 099. 099. 099. 099. 099. 099. 099. 099. 099. 000 08. 9 000.0 0 000.0 9 000.0 9 000.0 08 L 000 L 000 9 L 000 L 000 9 L 000 L 0 000 00 L 0 000 L 000 99 L 000 L 000 99 099. 099 0. 099. 9 099.0 099. 8 099. 8 099 8. 099 00. 099 0. 099 0. 000.00 08 000.0 09 000.0 0 000.0 09 000 0. L 000 98 L 000 L 000 9 L 000 L 000 9 L 000 L 000 00 L 000 L 000 99 L 000 099 8. 099 9. 099. 099. 099. 8 099.0 099. 0 099 8. 099 9.0 099 8.0 0 L 0 000 9 L 0 000 L 0 000 9 L 0 000 L 0 000 98 L 000 L 000 98 L 000 L 000 9 L 000 L 000 99 L 000 L 000 00 L 000 L 000 99 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Numbers AD, B- W No. Page No. No. Page No. No. Page No. No. Page No. No. Page No. No. Page No. AD, 8 AL AL 8 AL 0 AMS 00 BJM8 0 BJM8.0 0 BJM8. 0 BJM8. 0 BJM8. 0 D /.C..L D /.D. D /.D.N. D /.N. 9 D /.P. D /8.SFD.I. 0 D /8.SFD.I. 8 D /8.SFDT.I. 8 D /8.SFDT.I. 0 D /8.SFDT.I. 8 DH /.PI. 9 DH,/. DH,/.N. DH,/.PI. 8 DH,/8. 9 DS /8. 8 DS /8.N. DS /8.N. 8 DS /8.P. 8 DS /8.P. 8 ANT BADH 8 BADL 8 BADL 8 BAM 8 BJM8. 0 BJMI BJMI 8 BJMI8 0 BJP 8 D /.PI. D /.S. D /.SFAT. D /.SFAT. D /.SNT. D /8.SFDT.I. 0 D /8.SFL.I. 8 D /8.SFL.I. 0 D /8.SFLT.I. 8 D /8.SFLT.I. 0 DH,/8.N. 9 DH,/8.PI. 9 DH /. DH /.N. DH /.PI. 8 DS /8.PI. DS /8.PI. 8 DSE,/. 80 DSE /. 80 DSE,/. BAM V0 8 BAMH 8 BAMH V0 8 BA 8 BFAUTO BJP8 0 BJS BJS 8 BJS8 0 BNC D /.SNT. D,/. D,/.. D,/.N. D,/.S. D /8.SFT.I. D /8.SFT.I. 9 D /8.SN. D /8.SNN.I. D /8.SNN.I. DH /8.A. DH /8.A.N. DH /8.A.PI. 8 DH /8. DH /8. 9 DSE,/8. 8 DSE /. DSE /8.A. DSE /8. DSE /8. 8 BFAUTO BFSAUTO BJA 8 BJAD BJ.0 BNCT8 BNF BNF BNFD BNFD D,/.SFA. D,/.SFAT. D,/.SFAT. D,/.SN. 0 D,/.SNT. 0 D /8.SNNT.I. D /8.SNNT.I. D /8.SNT. D /8.SNT. D /8. 0 DH /8.N. DH /8.N. 9 DH /8.PI. 8 DH /8.PI. 9 D,/. 8 DSPBO.P 8 DSPBO.PI 8 EIP EL 8 EP 8 BJ. BJ.0 BJ. BJ. BJ. BNFL BNFV0 0 BNS.D BNSV BNSV- 0 D,/.SNT. 0 D,/.-CPE 9 D,/.-CPE.NF 09 D,/.-CPE.NF 0 D,/.-CPE 9 D /8.. D /8.. D /8.. D /8..C D /8..S D,/.N. 8 D,/.PI. 8 D /. 8 D /.N. 8 D /.PI. 8 EP8 EV EV 8 EXBN BJ.0 8 BJ. 8 BJ.0 8 BJ. 8 BJ. 8 BNSV8 BO BO8 8 BP8.A CBD 8 D,/.-CPE.NF 09 D,/.-CPE.NF. 0 D,/8 NT. D,/8. D,/8.. D /8. D /8.D. D /8.D.. D /8.D.N. D /8.N. 0 D,/. 9 D,/.N. 9 D,/.PI. D,/8. 8 D,/8.N. 8 F8 FC 8 FC MC FC 8 FEAD BJ. 8 BJB BJDP 8 BJDP 8 BJDP 8 CBD 8 CBDS 8 CBD.L 8 CBM 8 CBMD 8 D,/8.. D,/8.. D,/8..C D,/8..NF 0 D,/8..NF 0 D /8.N. D /8.P. 9 D/.C..L 0 D/.C. D/.C..L D,/8.P. 8 D,/8.PI. 8 D /. 9 D /.N. 9 D /.PI. FEAD 80 FEAD FEAD 88 FEAD FEAD 8 BJDP 0 BJE.0 BJE. BJE. BJE. CBM8 CDB CE. CE. CE.8 D,/8.N. D,/8.P. D,/8.PI. D,/8.S. 0 D,/8.S..NF 0 D/.C. D,/.P. 9 D,/.PI. 8 D/.P. 9 D/.PI. 8 D /8.A. 0 D /8.A.N. 0 D /8.A.P. D /8.A.PI. D /8. 0 FEADS FECPE. 9 FECPE. 9 FEDAD FEDAD BJE. BJE. BJE. BJE.8 BJE.9 CEE COCE 9 D,/ NT. D,/. D,/.. D,/8.SFDT. D,/8.SFDT. D,/8.SFLT. D,/8.SFT. D,/8.SNNT. D/8.P. 9 D/8.PI. 8 D/8.PI.. 8 DB,/. 88 DB,/.N. 88 D /8. 8 D /8.N. 0 D /8.N. 8 D /8.P. D /8.P. 8 FED.C. 0 FEDAD FEDAD0 FEDAD 0 FEDAD 9 BJE.0 8 BJE. 8 BJE. 8 BJE. 8 BJE. 8 BJE. 8 BJE. 8 BJE.8 8 BJE.9 8 BJE.0 9 BJE. 9 BJE. 9 BJE8.0 0 BJE8.0 BJE8. 0 BJE8. BJE8. 0 BJE8. 0 BJE8. 0 BJE8. 0 BJE8. BJE8.8 0 BJE8.9 0 BJM BJM 8 BJM.0 0 BJM. 0 BJM. 0 BJM. 0 BJM. 0 D,/.. D,/.. D,/..C D,/..D 8 D,/..D 8 D,/..D.NF 0 D,/..NF 0 D,/.D. 8 D,/.D.. 9 D,/.D..NF 0 D,/.D.N. 8 D,/.N. D,/.P. D,/.PI. D,/.S. 0 D,/.S..NF 0 D,/.SNT. 8 D,/.SNT. 8 D,/.-CPE 9 D,/.-CPE.NF 08 D,/.-CPE 9 D,/.-CPE.NF 08 D,/8.SFDT. D,/8.SFDT. D,/8.SFLT. D,/8.SFT. D,/8.SNNT. D /. 9 D /.. 0 D /.C. 0 D,/8.SNT. 8 D,/8.SNT.0. 9 D,/8.SNT. 8 D /. 8 D /.. 9 D /.. 9 D /..C 9 D /..T 9 D /.D.P. 9 D /.D. D /.D.. D /.D.N. D /.N. 8 D /.S. D /.SN. D /.SNT. D /.SNT. D /.-CPE 9 D /.-CPE.NF D /.-CPE 9 D /.-CPE.NF D /8. D /8..NF 0 D /8.N. D /8.P. D /8.PI. D /8.S.A. D /8.S. D /8.SF.I. D /8.SF.I. 9 DB,/.PI. 90 DB /. 88 DB /.N. 88 DB /.PI. 90 DB,/. DB,/.N. DB,/.PI. DB,/8. 89 DB,/8.N. 89 DB,/8.PI. 90 DB /. DB /.N. DB /.PI. DB /8.A. DB /8.A.N. DB /8.A.PI. DB /8. DB /8. 89 DB /8.N. DB /8.N. 89 DB /8.PI. DB /8.PI. 90 DCB DCJ 8 DCO 0 DH,/. 9 DH,/.N. 9 DH,/.PI. 9 DH /. 9 DH /.N. 9 D /8.PI. D /8.PI. 8 DE,/. 8 DE /. 8 DE,/. 9 DE /. 9 DE /8.A. 0 DE /8. 0 DE /8. 8 DS,/. 80 DS,/.N. 80 DS,/.PI. 8 DS /. 80 DS /.N. 80 DS /.PI. 8 DS,/. DS,/.N. DS,/.PI. DS,/8. 8 DS,/8.N. 8 DS,/8.P. 8 DS,/8.PI. 8 DS /. DS /.N. DS /.PI. DS /8.A. DS /8.A.N. DS /8.A.P. 8 DS /8.A.PI. DS /8. FEDAD FEDADNT FEMAD 9 FU0 FU FUAUTO FUBS FUPLV ITVE D PC PC.0 0 PC. 0 PC 8 PC PC8 0 PC8 P.Z 8 P 8 P.G 8 P.Z 8 P0 8 P 8 P 8 PT 9 PT 9 B- W Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Numbers SCAD VSP No. Page No. No. Page No. No. Page No. No. Page No. No. Page No. No. Page No. SCAD 8 SCAD SFB.B 8 SFB.B 8 SFB.B 8 SFB.B 8 SFB SFB TGA8 V.CPE 9 VPA VSP 8 Low Products & Systems ABB Inc. 888-8- www.abb-control.com LV009 [SXU0009C00] - June 00

Notes 8 Low Products & Systems LV009 [SXU0009C00] - June 00 ABB Inc. 888-8- www.abb-control.com

Publication LV009 No. SXU0009C00 Printed in USA, June 00 ABB Inc. 0 Hatton oad Wichita Falls, TX 0 Telephone 888-8-; 90-9-000 Fax 90-9-08 http://www.abb-control.com ABB Inc. 99, J.B. Deschamps Lachine, QC H8T E Canada Telephone: 800--08 (Quebec) 8-0-00 (Ontario) 8--88 (Calgary) 0-- (British Columbia)