LED LIGHTING WWW.FMP-AS.NO 2014/2015 1

LED LIGHTING WWW.FMP-AS.NO 2014/2015 1

9 LIGHTING SYSTEMS

40 80 120 160 VIP LED 65 L A A modern line of system lighting luminaires made of thick-wall aluminum profile with high resistance parameters. The direct (DI) lighting beam, can be obtained by means of micro prismatic diffuser. Thanks to the series of additional mounting accessories the luminaires can be easily mounted and offer many different universal configurations. 65 137 Materials: powder painted aluminum profile (grey colour in standard). Micro prismatic diffuser (MPRM) Installation: surface mounted, wall mounted or suspended. Accessories: joints (linear joint, 90 joint, T-joint, cross joint, Y-joint, wall joint, ceiling joint); suspensions (simple, electric), end caps ; the quick-release 5-pole connection block allows to join the luminaires in line. VIP LED 46W MPRM LIGHT SOURCE'S LAMP LUMINOUS [kg] COLOUR EFFICACY POWER VIP G/K LED FOR PLASTER - CARDBOARD CEILING 86 MOUNTING HOLES DISTANCE BETWEEN BRACKETS Lighting luminaire from the family VIP, adapted for mounting into plaster-cardboard ceiling. The appropriate joints (linear and T-joint) allow to connect the luminaires in a straight line or to create the 90 angle. Materials: powder painted aluminum profile (grey colour in standard); micro prismatic diffuser Installation: into plaster-cardboard ceiling with appropriate mounting brackets. Accessories: linear joint, 90 joint, end caps, the quick-release 5-pole connection block allows to join the luminaires in line by sections. DALI - on request. VIP GK LED In case of in-line installation add up lengths of all used luminaries (L dimension) and increase the result by 10mm e.g. mounting hole for line including VIP 38W + VIP 46W = 1183+ 1483 + 10 = 2676mm [kg] COLOUR LUMINOUS EFFICACY OPAL POWER 10

VIP MINI 46 46 A VIP MINI, a new, subtle and miniaturized lighting luminaire, is enlarging the offer of VIP products. The body made of aluminum profile, the direct (DI) lighting beam. As in the case of VIP, the additional accessories allow various configurations of lighting luminaires. Power factor: cos ϕ > 0,95. Materials: powder painted aluminum profile (grey colour in standard), micro prismatic diffuser (MPRM). Installation: surface mounted, wall mounted or suspended. Accessories: joints (linear joint, 90 joint, T-joint, cross joint, wall joint, ceiling joint); suspensions (simple, electric), end caps Power supply: 230V; the quick-release 5-pole connection block allows to join the luminaires in line by sections, PUSH DIMM regulations on request. Do not available with emergency module. VIP MINI LED 42W LUMINOUS EFFICACY [kg] COLOUR POWER VIP MINI KINKIET 46 46 92 L 55 A VIP MINI BRACKET is a miniaturized lighting luminaire designed for wall mounting, complementing VIP series. Made of aluminum profile VIP MINI BRACKET is an additional decorative and accenting lighting luminaire perfect for subtle lighting. Materials: electrostatically painted aluminum profile (gray color in standard). MPRM diffuser. Installation: wall mounted VIP MINI KINKIET 19W LED LUMINOUS EFFICACY [kg] COLOUR POWER 11

VIP KINKIET IP44 100 L 46 46 155 VIP KINKIET IP44 LUMINOUS EFFICACY [kg] COLOUR POWER TRACK PRO LED A B S 92 VIP BRACKET IP44 is a subtle and minimalistic extension of VIP system made of aluminum profile and direct light distribution. VIP BRACKET IP44 was designed as an accenting wall luminaire for use in bathrooms, corridors and conference rooms. Materials: electrostatically painted aluminum profile (standard gray), OPAL polycarbonate diffuser. Installation: wall mounted Power: 230 V L An elegant and modern system lighting luminaire with the direct lighting beam. The luminaire is made of aluminum profile, chip LED of renown producers. Power factor cos ϕ > 0,95. The construction allows an easy connection of different modules (for fluorescent tubes, halogen lamps and LED) from the whole series TRACK by means of linear and 90 joints. To connect luminaires at the angle of the 90 suitable TRACK SPOT module is necessary. Materials: powder painted aluminum profile (grey colour in standard). Micro prismatic diffuser Installation: suspended Accessories: - linear joint, 90 joint; suspensions (simple, electric) Power supply: 230V TRACK PRO LED 47W LUMINOUS EFFICACY [kg] COLOUR POWER 12

13 INTERNAL FLOODLIGHTS

RAY II LED REY II LED AR111 POWER LUMINOUS EFFICACY [kg] COLOUR POWER Two axis adjustable floodlight of small size for LED light sources. Materials: powder painted grey aluminum body, aluminum reflector, tempered clear glass. Installation: for electrical track and ceiling montage REY II LED LUMINOUS EFFICACY [kg] COLOUR POWER KEP LED KEP FORTIMO ANGLE OF LIGHTING BEAM [kg] COLOUR INFO 220 160 244 200 61 101 284 40 KEP 3000 ANGLE OF LIGHTING BEAM [kg] COLOUR INFO 160 207 305 219 48 108 284 207 40 160 305 KEP 5000 ANGLE OF LIGHTING BEAM [kg] COLOUR INFO 219 61 108 Elegant and innovative, designed especially for LED light sources, KEP luminaire sets a new standards in projectors class. It ideally adapts to every type of environment and equipment. Specially shaped luminaire s body allow high heat dissipation and adjustment of luminaire s position by 350 both vertically and horizontally. Materials: body and component compartment in polyester painted die-cast aluminum. Reflectors in polycarbonate with mirror finish. Installation: for electrical track, wall mounting, ceiling mounting Accessories: optic device for 49 beam - only for FORTIMO version KEP FORTIMO KEP 5000 14

KYCLOS LED 40 KYCLOS ANGLE OF LIGHTING BEAM [kg] COLOUR INFO 250 207 268 213 65 108 KYCLOS COMPACT ANGLE OF [kg] COLOUR INFO LIGHTING BEAM 38 180 37 126 64 120 125 65 150 MINI KYCLOS 88 56 ANGLE OF [kg] COLOUR INFO LIGHTING BEAM Kyclos is a modern LED floodlight for electrical tracks. It s characteristic for its innovative, passive heat removal system, the delicacy of style and high efficiency. Perfect for lighting of shops, exhibitions and art galleries. 120 Materials: epoxy-polyester painted die-cast aluminum. Front made of transparent or painted polycarbonate. Metalized reflector made of thermo plastic material Installation: to electrical tracks, on a base version - on request Accessories: reflector for beam angle regulation KYCLOS 51W 28 KYCLOS 51W 44 KYCLOS 51W 66 KYCLOS 39W 28 KEP LED KEP LED 15

16 INTERIOR LUMINAIRES

PARABOLIC LED Light housing LED louver module o high luminous efficacy Body made of high quality galvanized, electrostatically painted steel Parabolic louver reduces glare rating (UGR) in the Parabolic LED luminaries to 15 LEDs installed on a specially designed PCB blades Microprismatic diffusors regulate light distribution and protect electronic components from direct contact with user Color temperature: 3000K and 4000K. Instant ignition of light sources. LED light sources of renowned producers with high luminous efficacy (up to 125 lm/w) and Color Rendering Index CRI >80 Optional: possibility of regulation of light beam through light sensors, automation and light control systems Installation in the suspended ceiling 600x600 Ceiling mounted Suspended Power supplies of reputable manufacturers with power factor (cos fi = 0,97) with internal protection against: - overload - short-circuit - overtemperature (thermal protection) 17

BARI ii LED Aluminum radiator is giving optimum operating conditions for LEDs Reflector made of high-quality polished aluminum with a purity of 99.85% Easy installation by the application of special mounting brackets Tempered glass protects the LED light source Possibility painting in any of RAL colors IP44 class of protection PERFECT THERMAL CONDITIONS FOR LEDS LEDs of renowned manufacturers with integrated power supply of high luminous efficacy (80 lm/w) and color rendering index CRI>80. Instant light source ignition. Power supplies of renowned manufacturers are equipped with internal protections against: - overload - short-circuit - overtemperature (thermal protection) h=2,5m 360 3-12m Low glare effect achieved by proper mounting of LEDs Light distribution ideally suited to illuminate office spaces, lobbies and corridors. Light beam angle: version 155-48, version 195-60. Possibility of cooperation with motions sensors without affecting the life of light source. Possibility of light beam regulation in DC version. ENERGY EFFICIENT LIGHTING 18

SUN LED IP44 class of protection LEDs of renowned manufacturers of high luminous efficacy (up to 124 lm/w) and CRI > 80 Power supplies (cos ϕ = 0,97) of renowned manufacturers are equipped with internal protections against: - overload - short-circuit - overtemperature (thermal protection) Color temperature: 3000 K (warm white) 4000 K (natural white) Option: possibility of regulation of light beam by implementation of light sensor, automation and control Mounting into modular ceiling 600x600 with a visible supported structure Suspended 19

SOLID LED IP65 Tempered glass resistant to aggressive environments factors Housing made of high quality galvanized steel Corrosion and poor working conditions resistance. Cover with increased degree of protection IP65 Optimal working conditions of LEDs significantly extend their lifetime HIGH LIGHTING PARAMETERS LUMINARIE S EFFICIENCY ŋ = 79% PCB blades designed individually for Solid LED High quality of LED of well - known manufacturers guarantees maintenance- -free operation of the luminaire Diodes power supply with components of reputable companies High luminous efficacy of LED of 122 lm/w CONSTRUCTION OF SOLID LED WAS DESIGNED AND ADAPTED FOR HOSPITAL FACILITIES High heat dissipation factor Optional: possibility of light beam regulation Seal ensures tightness of the housing and safe housing-glass contact Optional: possibility of using an additional green LED module Glass frosting in the illuminated sections ensures uniform light distribution and eliminates glare effect Safe, shatterproof tempered glass Savings on electricity in medical rooms where high light intensity is required 20

UNI LED Housing made of galvanized steel 4,5 cm Compact, extremely flat design makes the fixture suitable for almost any interior, giving it an unique character Powder coating guarantees high class of protective cover and aesthetic look Universal construction Three types of diffusor tailored to customer needs h=2,5m 360 Frame with diffuser is mounted on the magnets, for ease of installation and access to the inside of the housing. Frame is also equipped with line protecting 3-12m Possibility of installation of external motion sensor Possibility of installation of emergency module Ceiling mounted Suspended mounting Mounting into modular ceiling 600x600 with a visible supported structure The use of different diffusors: micro prismatic (MPRM), prismatic (PRM), milk (OPAL) provides protection against glare and even illumination of work space while maintaining high efficiency LEDs of renowned manufacturers of high luminous efficacy (up to 124 lm/w) and CRI > 80 Possibility of adjustment of luminous flux Natural color of light Power supplies (cos ϕ = 0,97) of renowned manufacturers are equipped with internal protections against: - overload - short-circuit - overtemperature (thermal protection) Installation of LEDs on specially designed PCB blades 21

MILENA LED Back plate installation of LEDs provides a large surface for heat dissipation and guarantee optimal operating temperature for diodes. High-quality nickel-plated handles provide aesthetic appearance and solid suspension Extreamly slim design fits into any interior, giving it an unique character 3 cm Housing made of high grade aluminum alloy COMFORTABLE INSTALLATION LED power supply is a temperature sensitive device, because of that it has to be installed on the ceiling where thermal conditions are met and access is easy Possibility painting in any of RAL colors LEDs of renowned manufacturers have a high efficiacy of over 115 lm/w Natural color of light Installation of LEDs on specially designed PCB blades Possibility of regulation of light beam by implementation of light sensor, automation and control Intensity control Micro prismatic plate provides equal illumination of work space and protect the user against negative glare phenomenon 22

TT LED PLAFON PLAFOND 47 330 751,8 46 205 48 47 45 12 48 46 330 830 LUMINOUS EFFICACY [kg] COLOUR POWER Lighting luminaire of modern design equipped with LED light source from renowned producers. Characterized by uniform, indirect light distribution and the circumference light effect. Simple suspension Standard lenght of suspension maximum 1,5m [kg] COLOUR INFO Materials: anodized aluminum body; transparent diffuser made of PMMA; housing of the power supply made of stainless steel. Installation: surface mounted or suspended Accessories: simple and electric suspension Power supply: 230V TT LED PLAFON 45W Electric suspension Standard lenght of suspension maximum 1,5m [kg] COLOUR INFO TT LED 600x600 FOR MODULAR CEILING 595 515 41 595 517 12 70 108 LUMINOUS EFFICACY [kg] COLOUR POWER Innovative lighting luminaire with a simple, very elegant shape. The luminaire profile with a thickness of only 12 mm. LED light sources with high colour rendering index and high durability. Diffuser with micro-optics provides a uniform luminance on the surface of the luminaire and the high lighting comfort. In the luminaire s only the first-class AC power supplies are used of cos ϕ > 0,95. TT LED 600x600 45W MPRM Mounting bracket for 600x600 ceiling Materials: anodized aluminum body; diffuser with micro-optics Installation: into modular ceiling 600x600 with a visible supported structure or into plaster-cardboard ceiling TT LED 600x600 45W OPAL Mounting bracket for the plaster-cardboard ceiling Set (4 pcs.) / luminaire Set (2 pcs.) / luminaire 23

TT LED KINKIET BRACKET 200 250 52 220 200 12 45 40 410 A modern, accentuating lighting luminaire with a very sublime and esthetic form. The appropriate orientation of the light beam, combined with low power of light sources, allowed to create a unique visual effect. Materials: body made of anodized aluminum; opal diffuser made of PMMA Installation: wall mounted Power supply: 230V TT LED KINKIET [kg] COLOUR INFO DUET II 50 50 50 70 154 Wall mounted lighting luminaire with high power and efficient LED COB (Chip-On-Board) light sources from renowned producers. LED COB lighting is characteristic for its low failure rate, no multipoint emission effect, resistance to voltage fluctuations and comfortable light without pulsation effect. LED diffuser has been applied for better light distribution. LUMINOUS EFFICACY [kg] COLOUR POWER Materials: housing made of powder painted aluminum (grey colour in standard), transparent plate made of polycarbonate Installation: wall mounted Power supply: 230V DUET 40 24

FINESTRA LED 407 307 407 307 65 68 FINESTRA LED 20W FINESTRA LED 13W Energy-saving decorative lighting luminaire of modern and elegant shape equipped with LED light source from renowned producers. FINESTRA by universal form and type of assembly is suitable for public spaces, conference rooms, offices, communications, halls, stairways. The first-class AC power supply of renowned brands achieves cos ϕ >0,95. This luminaire perfectly complements to the rest series of FINESTRA luminaires. FINESTRA LED 20W Materials: powder painted, grey steel sheet body; available diffusers: microprismatic (MPRM) or prismatic (PRM) Installation: surface mounted, suspended and wall mounted Accessories: simple and electric suspension LUMINOUS EFFICACY [kg] COLOUR POWER FINESTRA INOX LED 437 337 437 337 65 65 FINESTRA INOX LED 20W FINESTRA INOX LED 13W Lighting luminaire with a minimalist form, based on LED technology. Microprismatic or prismatic diffuser provides a uniform luminance on the surface of the luminaire. The first-class AC power supply of renowned brands achieves cos ϕ >0,95. FINESTRA INOX LED is suitable for public spaces, conference rooms, offices, communications, halls, stairways. Materials: steel sheet brushed INOX body; steel sheet base in white colour; available diffusers: microprismatic (MPRM) or prismatic (PRM) Installation: surface mounted Power supply: 230V FINESTRA INOX LED 20W LUMINOUS EFFICACY [kg] COLOUR POWER 25

B FINESTRA RING LED LUMINOUS EFFICACY [kg] COLOUR POWER Unviersal plafond in modern version for LED light sources. In the luminaire only highest quality AC power supplies of renowned brands and cos ϕ higher than 0,95 are used. Materials: powder painted, grey aluminum body; base made of steel sheet. Prismatic PRM (PMMA) diffuser, microprismatic MPRM diffuser. Installation: surface mounted, suspended FINESTRA RING LED 26W Suspension set Standard lenght of suspension maximum 1,5m [kg] COLOUR FUZO LED A FUZO 240x240 FUZO 420x240 H POWER LED luminaire for universal use. Made with use of energy-saving LEDs of high luminous efficiency from reputable manufacturers. FUZO have been provided with power supply with power factor cos ϕ > 0,95. Available with housing of different colors, suitable for any interior color. Application: offices, conference rooms, corridors. Materials: frame made of electrostatically painted aluminium profile (standard grey). Frame can be painted in any RAL color. White housing made of sheet steel. MPRM micro-prismatic diffusor. Installation: suspended ceiling with visible supporting structure or plaster cardboard ceiling FUZO LED 34W LUMINOUS EFFICACY [kg] COLOUR POWER 26

KARDO 195x195 348x195 500x195 Multidirectional, accentuating lighting system with adjustable and independent spotlights designed for plaster-cardboard ceilings. Control gear and electronic transformators included. LUMINOUS EFFICACY [kg] COLOUR POWER Materials: powder painted, grey aluminum frame; aluminum rings; body made of steel sheet in black colour; light sources adjustable in two planes. Installation: into plaster-cardboard ceiling Accessories: surface mounted body KARDO LED 1x12W CUBE DLN 160 160 110 160 110 27 Cubic lighting luminaire of modern design combined with LED technology makes CUBE DLN a great solution for lighting both office spaces and aisles. Simple construction and austere design relate to modern interior design aesthetics. LED light source has an integrated heat sink that allows free flow of air around the LED source and therefore more efficient cooling. CUBE DLN 23W 4000K LUMINOUS EFFICACY [kg] COLOUR POWER Materials: steel sheet electrostatically painted in gray. All other colors from RAL color palette are available. Installation: surface mounted, suspended (for suspended version suspension included) Power supply: 230V 27

Ø114 Ø 79 BARI II LED Ø 195 Ø 155 Ø 150 155 150 Modern and universal downlight luminaire of high lighting performance, based on LED module. Application: offices, hotels, restaurants, halls, shopping malls. Advantages: thermal profiles made of high quality aluminum ensure a proper working temperature of LEDs, long operating time > 50 000 h, LEDs of renowned manufacturers of high luminous efficacy (80 lm/w) and CRI > 80, possibility painting in any of RAL colors. Possibility of light beam regulation in DC version and cooperation with motion sensors. LUMINOUS EFFICACY [kg] COLOUR POWER Materials: powder painted, white aluminum ring; steel sheet body; transparent tempered glass (SH). Reflector made of polished aluminum with a purity of 99.85 %. Installation: into plaster-cardboard and modular ceilings Power supply: AC version 230V integrated power supply, DC version 230V external power supply, included. BARI II LED AC version 230V integrated power supply DC version 230V external power supply, included BARI II MINI LED Ø 120 110 Modern and universal downlight luminaire of high lighting performance, based on LED module. Application: offices, hotels, restaurants, halls, shopping malls. Advantages: thermal profiles made of high quality aluminum ensure a proper working temperature of LEDs, long operating time > 50 000 h, LEDs of renowned manufacturers of high luminous efficacy (100 lm/w) and CRI > 80, possibility painting in any of RAL colors. Materials: powder painted, white aluminum ring; steel sheet body; transparent tempered glass (SH). Reflector made of aluminum with a purity of 99.85 %. Installation: into plaster-cardboard and modular ceilings BARI II MINI LED LUMINOUS EFFICACY [kg] COLOUR POWER 28

PF 19 / PF 30 190 300 40 40 91 109 PF 19 - REFLECTOR 50 PF 30 - REFLECTOR 120 PF 19 PF 30 [kg] COLOUR INFO PF 30 21W PF 19 108 Extremely thin ceiling luminaire, especially designed for LED light sources. Perfect for discrete and elegant interior lighting. IP40 ceiling IP44 wall mounting Materials: housing in die-cast aluminum with an innovative thermic dissipation system, polyester painting in white, silver or black color. Optic made of high resistance faceted polycarbonate, mirror metallized in high vacuum. Diffuser in OPAL polycarbonate. Installation: ceiling mounted, wall mounted OS LED 73 OS LED 73 1x4W 1x4W 1x4W 1x4W LED LED LED LED 0,50 0,50 0,50 0,50 20 20 40 40 2900K 5400K 2900K 5400K PX0864101 PX0864108 PX0864115 PX0864122 A series of adjustable LED spotlights with IP65, designed for accent lighting outside the buildings and in humid rooms. ANGLE [kg] COLOUR INFO OF LIGHT BEAM Materials: ring of powder painted aluminum in white colour. Installation: into suspended ceiling OS LED 4W 29

MONZA II LED A B 30 50 23 223 MONZA LED 47W LUMINOUS EFFICACY [kg] COLOUR POWER New luminaire of modern design, based on LED lamps, dedicated for ceiling or suspended mounting. Compact and adjustable MONZA II LED is a great solution for both small and bigger spaces, perfect for offices, corridors and many other. The LED luminaires uses diodes of reputable manufacturers. High quality power supply provides high power factor >0,95. Materials: powder painted body made of steel sheets and durable polycarbonate. OPAL and prismatic diffusers made of PMMA. Installation: ceiling mounted, suspended Accessories: suspensions type Y (simple, electric) PARABOLIC LED 596 41 7 version: 3x... and 2x... version 1 x... 45 NT 41 7 45 48 596 1196 PARABOLIC LED 40W Modern louver luminaire for LED light sources of high technical and optical parameters. The luminaire has a very low glare rating thanks to the parabolic, aluminum louvers and low power consumption comparing with conventional light sources. Because of the innovative optical system Louver LED is ideally suited for lighting office spaces and in particular for work with computers. For suspended version of the luminaire the calculation should consist of: recessed version of the luminaire, one simple and one electric suspension LUMINOUS EFFICACY [kg] COLOUR POWER INFO 48 296 Materials: white housing made of electrostatically painted steel, parabolic louver made of anodized, polished aluminum of high purity, replaceable LED module with additional micro prismatic diffusor. Installation: 600x600 suspended ceilings with visible supporting structure, surface mounted, suspended Accessories: suspension (regular, electric) 30

UNI LED 45 135 26 595 500 UNI LED 45W OPAL SUN LED 277 596 70 47 596 117 47 296 53 595 500 440 Universal luminaire designed specifically for LED light sources. Simple installation, LED chips of reputable manufacturers and power factor cos ϕ = 0,97 makes the UNI LED a high quality product with a wide range of possible applications. UNI LED is available in versions with motion sensor and emergency module. [kg] COLOUR Materials: housing made of electrostatically LUMINOUS EFFICACY POWER painted galvanized steel (standard color white), micro prismatic diffuser MPRM, prismatic diffuser PRM or OPAL, magnets mounted frame. Installation: ceiling mounted, suspended, into modular ceiling 600x600 with a visible supported structure Accessories: motion sensor, emergency module, simple and electric suspension SUN LED 45W 1196 Modern luminaire designed for LED light sources of high lighting efficiency. SUN LED has an aesthetic appeal, it s light and quick in installation. It also connect high lighting performance with low level of Unified Glare Rating (UGR). SUN LED has been equipped with a power supply with power factor cos ϕ > 0,95. DALI ballast on request. Product is designed for offices, conference rooms and passageways. LUMINOUS EFFICACY [kg] COLOUR POWER INFO Materials: housing made of steel, electrostatically painted in white (standard color) with all other RAL colors available. Microprismatic diffuser (MPRM). Installation: in the modular ceiling with visible grid, suspended Standard lenght of suspension maximum 1,5m Suspended version - suspension in set 31

LEDISK 309 283 Modern luminaire with powerful LED light sources of well know producers. LEDISK is characterized by an unique plastic processing technology used for the preparation and molding of the diffusors used for forming of the light beam. This allows you to get the original style and small thickness of the frame (only 10 mm). The luminaire can be used as a lighting of representative rooms: lobbies, lounges, conference rooms and apartments. Materials: aluminum ring electrostatlically painted in white, milled PMMA plate, electric suspension in aluminum profile Installation: suspended (suspension included) MILENA LED Susspension C 72 B A 30 144 46 12 25 LEDISK 20W LUMINOUS EFFICACY [kg] COLOUR POWER Modern LED lighting luminaire with high luminous efficiency and subtle design, is an ideal application for representative rooms. Materials: aluminum profile powder-painted in two colors gray and black (all colors in RAL pallet available). Micro prismatic diffuser (MPRM). Installation: suspended (suspension included) MILENA LED 54W LUMINOUS EFFICACY [kg] COLOUR POWER 32

ROMA ECO LED 102 62 ROMA ECO LED 34W MPRM ROMA ECO LED 34W OPAL LUMINOUS EFFICACY INFO POWER [kg] [kg] EM 3H Solid and popular lighting luminaire designed for budget units. High energetic efficiency with minimalized power consumption. For installation in suspended ceilings with exposed grid. Materials: body made of steel sheets, powder painted in white. Diffusors available in OPAL, prismatic (PRM) and mikro prismatic versions Installation: into modular ceiling 600x600 with a visible supported structure PISA ECO LED EM 3H - emergency module PISA ECO LED 45W MPRM LUMINOUS EFFICACY INFO POWER [kg] [kg] EM 3H Solid and popular lighting fixture designed for offices and public buildings. High energetic efficiency with minimalized power consumption. Available in versions with motion sensor and emergency module. Materials: body made of steel sheets, powder painted in white. Diffusors available in OPAL, prismatic (PRM) and mikro prismatic (MPRM) versions Installation: into plaster-cardboard ceiling EM 3H - emergency module 33

LATTE NEW LED The 20W version can be equipped either with motion sensor or emergency module. The 38W and 47W version can be equipped both with motion sensor and emergency module. POWER LUMINOUS EFFICACY [kg] COLOUR INFO LATTE NEW LED 20W LATTE NEW LED 47W A classic lighting luminaire with diffuser based on high quality LED light sources for general lighting. Materials: powder painted, steel sheet body in white colour, CLEAR diffuser. Installation: surface mounted SOLID LED 596 91 596 Economically effective LED luminaire of high endurance designed for clean environments and industrial areas with need for higher protection rate. Sandblasted and tempered glass provides a high degree of protection of light sources and uniform light distribution. Luminaire available with additional green light module as an option to be used in specialized treatment rooms and laboratories. Materials: housing made of galvanized steel electrostatically painted in white, sandblasted and tempered glass Installation: 600x600 suspended ceilings with visible supporting structure Accessories: green LED module SOLID LED LUMINOUS EFFICACY [kg] COLOUR POWER 34

CIRCLE 450 595 445 170 445 170 63 595 449 449 63 High-grade luminaire with a subtle and evenly distributed light beam. CIRCLE is equipped with opal diffuser blending harmoniously with the surface of the ceiling. Perfect choice for offices, corridors and lobbies. CIRCLE CIRCLE G/K CIRCLE 600x600 Materials: housing made of steel, electrostatically painted in white (all colors in RAL pallet available), diffuser - opal plate (PMMA). Installation: suspended ceilings with exposed grid 600x600 or G/K ceilings (gypsum plasterboard). POWER LUMINOUS EFFICACY [kg] COLOUR INFO 35

36 PLAFONDS

MODENA LED Housing made of high-quality, UV- -proof, engineered plastic resistant to external conditions A simple form to be used either indoor or outdoor Electronic components of renowned manufacturers LEDs of renowned manufacturers of high luminous efficacy and color rendering index CRI>80 Equal distribution of LEDs in the luminaire guarantees circularly- symmetric shape of the photometrics Installation of LEDs on specially designed PCB blades Elastic diffuser High mechanical resistance of the diffuser Diffuser mounted with screws for easy access into the luminaire and for increased safety of use Installation both on the ceiling and on the walls with complete stability of the construction 37

MODENA MINI LED LEDs of renowned manufacturers of high luminous efficacy (up to 115 lm/w) and color rendering index CRI>80 Power supplies of renowned producers ensures optimum working conditions of LEDs Equal distribution of LEDs in the luminaire guarantees circularlysymmetric shape of the photomtrics h=2,5m 360 DIFFUSER OF THE MODENA MINI LUMINAIRE - VIEW FROM ABOVE The new, improved version has a modified LED diodes arrangement. 3-12m Possibility of regulation of motion sensor Possibility of emergency module installation Diffuser fastened with snaps allows quick installation BASE OF THE MODENA MINI LUMINAIRE - VIEW FROM ABOVE Installation both on the ceiling and on the walls with complete stability of the construction white version grey version 38

354 MODENA LED IP66 IK10 298 Plafond with high esthetic features and over standard parameters: UV proof, highly resistant to mechanical factors and adverse external conditions. Protection degree IP66, body of high quality material. Emergency module AW 3H. Plafonds available with motion detector, daylight sensor or emergency module. 298 400 50 110 Materials: white version: body and diffuser made of polycarbonate (PC) in white color with UV stabilization protecting against getting yellow, vandalproof - IK10 transparent version: transparent body and diffuser made of polycarbonate (PC) with UV stabilization protecting against getting yellow, vandalproof - IK10 grey version: body in grey color, diffuser made of polycarbonate (PC) in white color with UV stabiliza-tion protecting against getting yellow, vandal-proof - IK10 Installation: surface or wall mounted MODENA LED 26W OPAL MODENA LED 26W TRANSPARENT LUMINOUS EFFICACY [kg] INFO POWER AW 3H - version with 3h emergency module MODENA MINI LED 315 285 IP54 90 45 Ø 4,5 44 225 Modern plafond MODENA MINI is an extension of MODENA family of luminaries. Highly aesthetic and characteristic for great parameters: resistance to external conditions and UV rays with IP54 degree of protection. Available with AW 3H emergency module. Possibility of application of motion sensor. 106 The LED luminaires uses diodes of reputable manufacturers. High quality power supply provides high power factor. Materials: white version: base and diffusor made of white policarbonate with UV stabilization which protects the luminaire against yellowing grey version: grey base, OPAL diffusor made of policarbonate with UV stabilization which protects the luminaire against yellowing Installation: ceiling mounted, wall mounted MODENA MINI LED LUMINOUS EFFICACY [kg] INFO POWER 39

40 architectural luminaires

MINITEN / TEN Wall mounted lighting luminaire of direct-indirect light distribution. High IP 66 protection class allow both indoor and outdoor use. Dedicated for illumination of architectural elements, building facades, paths and sidewalks. Materials: body in die-cast aluminum of increased resistance for chemicals, corrosion and acid fumes. Stainless steel screws. Shockproof and heat resistant tempered safety glass. Silicone gaskets. Installation: wall mounted Accessories: optic lenses of different light beams, shaped diaphragm for the blade of light Power supply: 230V MINITEN LED LIGHTING [kg] BEAM LIGHTING [kg] INFO BEAM BALTI BALTI 220 BALTI 150 BALTI 80 225 158 83 163 48 153 46 166 56 BALTI 220 ANGLE OF LIGHTING BEAM [kg] COLOUR INFO BALTI 220 BALTI 150 ANGLE OF [kg] COLOUR INFO LIGHTING BEAM External LED luminaire with direct-indirect and direct light distribution. Great for illumination of promenades, halls, corridors, passages or alleys. Materials: powder painted die-cast aluminum with special antioxidant coating which ensures height resistance from external factors. Diffuser made of transparent thermoplastics. INOX screws. Installation: wall mounted BALTI 150 BALTI 80 BALTI 80 ANGLE OF LIGHTING BEAM [kg] COLOUR INFO 41

PN210 Aluminium housing, optic s in UV resistant transparent polycarbonate 30 Outdoor LED luminaire of IP65 degree of protection. Slim, elegant shape allows to use PN210 as a main lighting for outdoor corridors, underground passageways and arcades. High quality materials are resistant to changing weather conditions and UV radiation. Built-in power supply allows for direct connection to 230V network. 210 Materials: housing made of die-cast aluminum, protected with UV-proof, grey, white or black polyester coating, decorative, transparent polycarbonate diffuser Installation: ceiling mounted, wall mounted PN210 LED 12W LIGHTING COLOUR [kg] BEAM ACHILLE ACHILLE 320 15 ACHILLE 190 7 A drive-over recessed lighting luminaire with adjustable light angle; protection degree IP67. Materials: ring of stainless steel, housing made of black plastics; transparent, tempered glass, mat on the circumference with a load from 2000 kg up to 3000 kg (depending on the diameter of the lighting luminaire). Installation: recessed ACHILLE 320 LED 22W [kg] INFO COLOUR 42

LITO LITO 1200 2,5 m power cable included LITO LITO MAXI LITO 284 120 160 235 154 160 120 210 28 220 39 55 220 Outdoor floodlight for LED light sources. LITO and MAXILITO thanks to their compact dimensions perfectly blend into the design of facades where they can be hidden under the cornices and behind columns. Delicate shape of the luminaire allows for facade lighting without creating a visual impact on the historic or aesthetic character of the building. At the same time modern design can be used to highlight the nature of futuristic office buildings by installing luminaires in a direct line of sight. Adjustable tilt angle of 220. MAXI LITO [kg] COLOUR [kg] COLOUR Materials: body made of die cast aluminum protected by grey, UV-proof polyester coating, decorative diffuser made of transparent polycarbonate, wall bracket made of steel. Integrated feeder. Installation: wall mounted, to the ground LITO 12W PIXEL 180 PIXEL CYC 283 305 279 97 180 395 450 Outdoor floodlight LED luminaire of modern and elegant shape. Designed for newest LED modules of high efficiency. Ideal for lighting facades, gardens, shopping malls, residential areas. Also perfect for illumination of streets, parks and squares. Versions: SM - supplied without lens to increase efficiency. AS - asymmetrical lens with vertex at 50. ST - road lens with asymmetry vertex at 30. CYC - symmetric road lens ideal for cycle paths. Materials: housing and frame of die cast aluminum with grooves for easier heat dissipation. Covered with thermoset powder paint. 4 mm thick tempered glass. Installation: wall mounted, to the ground, mounting bracket made of stainless steel included. Power supply: 230V PIXEL ST PIXEL AS PIXEL SM [kg] COLOUR INFO 43

SOUL Luminaire adapted for mounting to a Ø 60 mm pole Street luminaires for LED sources. Application: street and sidewalks lighting, squares, parking lots, parks and other urban spaces. Materials: housing made of die cast aluminum protected by the thermosetting polyester coating. Reflector made of polished aluminum with a purity of 99.85%. 4 mm thick tempered glass. Installation: to the pole with possible 4 positions of arrangement in range of 0-15 SOUL LED 48W [kg] COLOUR INFO 44

45

46 industrial luminaires

MATRIUS LED Available with emergency module Housing made of high grade aluminum alloy Optimal temperature conditions inside the luminaire significantly extend the life time of LEDs Construction resistant to corrosion and poor environmental conditions. Luminaire with increased tightness - IP65 Polycarbonate diffusor resistant to UV radiation and large temperature differences LEDs of renowned manufacturers of high luminous efficacy (up to 124 lm/w) and color rendering index CRI>80 Possibility of adjustment of luminous flux. Two light beam angles are available depending of height and surface of illuminated area. Narrow beam version 45 with additional reflector (IP65 only) Wide beam version Smooth adjustment of fasteners spacing Sliding mounting brackets Mounting rails Easy in-line installation 47

FLASH LED Possibility of adjustment of luminous flux (dimmable version) Two light beam angles are available depending of height and surface of illuminated area Temperatura barwowa światła 5000K Color temperature equal 5000K Extremely high light output of single luminaire allows to optimize the illumination of large work spaces LEDs of renowned manufacturers of high luminous efficacy (up to 120 lm/w) High optical efficiency of luminaire is guaranteed by Ledil optical systems used for each diode separately Installation of LEDs on specially designed PCB blades Easy installation Trouble and maintanace-free operation of Flash LED luminaires is provided by high quality components with built-in security systems: - overload - short-circuit - overtemperature (thermal protection) Power supplies of renowned producers ensures optimum working conditions of LEDs h=2,5m 360 3-12m Possibility of installation of external motion sensor for single luminaire or group of luminaires Luminaire available with protective mesh which allows to increase its mechanical endurance up to IK10 degree 48

ALFA LED Power supplies of reputable companies ensures optimum working conditions of light sources to guarantee their long-time and trouble-free operation Ribbed housing made of aluminum gives a suitable temperature conditions necessary for long-term trouble-free operation of LEDs Polished aluminum reflector ensures adequate protection of electronic components, aestetic appearance and allows easy cleaning of the luminaires The entire structure is resistant to corrosion which significantly extends the life of the luminaire, even in the adverse environment h=2,5m 360 Safe tempered glass provides high degree of protection (IP65) and protects the light soruces from external factors 3-12m Possibility of cooperation with external motion sensors without affecting the life of light source LED light sources of renowned manufacturerss Light sources of high efficiency (up to 110lm/W) Low glare degree Light distribution adapter to the high and lower spacer Instant light source ignition Ligh color temperaturę 5000K and CRI = 70 Very high light output of a single luminaire through which you can reduce the number of light points needed to properly illuminate the work surface Special reflector placed directly on the LED provides universal light distribution of the mulinaire Optical system (Ledil) applied to each LED separately guarantee high optical efficiency of the luminaire Suitable for suspension mounting on the chains providing solid and safe exploitation ALUMINUM RADIATOR IS GIVING OPTIMUM OPERATING CONDITIONS FOR LEDS The use of Wieland s quick connector enables easy and fast installation ENERGY EFFICIENT LIGHTING 49

POKER LS LED Smooth adjustment of fasteners spacing 88 235 45W - 1170 mm 235 55W - 1470 mm Industrial luminaire for LED light sources for inline installation. Luminaire has a simple way of installation without use of additional tools. Thank to LED it s lighter, it s exploitation is more energy efficient. Aluminum reflector optimize light distribution. Designed for lighting service spaces, warehouses and supermarkets. Materials: housing made of steel electrostatically painted in white, reflector made of polished aluminum Installation: suspended Accessories: suspension, suspension handle, masking cover, end caps MATRIUS NOTE: chain visible on the photo is not a part of the set with a luminaire 70 93 87 75 LUMINOUS EFFICACY [kg] COLOUR INFO POWER L 62 LUMINOUS EFFICACY [kg] POWER Modern, hermetic luminaire with multiple functions. Perfect for lighting aisles, passageways, storage areas, warehouses and all types of industrial spaces. MATRIUS is equipped with the latest generation of LED sources closed in the aesthetic, aluminum housing with IP54 or IP65 degree of protection. Luminaire available either in narrow or wide beam versions (45 available only in IP65 version of Matrius) Easy installation and smooth adjustment of fasteners spacing. Materials: aluminum profile, transparent PC plate Installation: suspended, ceiling mounted MATRIUS 35W 4000K 50

FLASH LED 300 97 484 LUMINOUS EFFICACY [kg] COLOUR POWER INFO FLASH LED is a modern luminaire based on experience and popularity of our popular product - FLASH. New version has been equipped with special LED light sources designed for floodlights, produced by reputable manufacturers. Due to the long life of LED and maintenance-free character of a luminaire it can be easily installed in a places hard to reach. Additional accessories: frame with mesh - IK10. Application: gas stations, warehouses, industrial areas and their immediate surroundings. Materials: housing made of steel, electrostatically painted standard white, with possibility of application of any RAL color; transparent tempered glass Installation: on the ceiling; recessed Accessories: frame with mesh (ceiling version), masking frame (recessed version) FLASH LED 31 FLASH LED 49 Frame with grid Masking frame Suspension ALFA LED 666 316 150 Ø 60 Ø 40 497 High-Bay industrial luminaire designed for LED light source with high lighting performance. Alfa LED suits well to all kind of warehouses, manufacturing spaces, transportation routes and even in to modern lofts. Materials: grooved aluminum housing, polished aluminum reflector, transparent tempered glass, LED light source from reputable manufacturers, additional reflector for LED light source, IP65 Wieland s connector. Installation: suspended Accessories: protective grid Power supply: 230V ALFA LED 90 W ANGLE OF [kg] COLOUR LUMINOUS EFFICACY LIGHTING BEAM POWER 51

EMERGENCY AND EVACUATION LUMINAIREs 52

VIP MASTER NM - non - maintained version M - maintained version NM AD - non - maintained version with autotest M AD - maintained version with autotest MAINS - mains 230V AC/DC VIP MASTER G/K VIP MASTER EMERGENCY [kg] COLOUR MODE VIP MASTER PANEL G/K One or double task emergency luminaire, available in versions with autotest, with central battery connection or with DATA-S luminaire monitoring system connection. Materials: housing made of aluminum electrostatically painted in gray, diffusor made of PMMA. Installation: Surface mounted version: wall mounted, ceiling mounted, suspended G/K version: recessed in suspended G/K (gypsum plasterboard) ceiling and ceilings 600x600 with visible grid Accessories: ceiling/suspending connector, wall connector Power supply: 230V AC/DC VIP MASTER PANEL EMERGENCY [kg] COLOUR MODE 53

LEGEND product code product can be sold on the European Union market light beam: indirect (IN) COLOUR light beam: direct (DI) POWER light source wattage protection degree light beam: direct-indirect (DI-IN) LAMP light source information impact resistance level dimension of the mounting hole [kg] insulation class I dimension of the mounting hole ANGLE OF LIGHT BEAM angle of light beam insulation class II rotation angle EMERGENCY MODE working time in emergency mode electronic ballast included INFO remarks permissible static load EUROPEAN UNION ENERGY LABEL In accordance with EU Regulation 874/2012 relating to the labeling of luminaries we wo-uld like to announce that FMP Lighting is fully prepared to provide information about the ener-gy efficiency of our products. In order to fami-liarize yourself with the efficiency we encourage you to visit our website and contact our Export Department. Luminaries with LED light sources in presented catalog have an energy efficiencies at levels A+ and A. A + A B C D E This luminaire contains built-in LED lamps. L E D The lamps cannot be changed in the luminaire. 874/2012 INFO The catalogue does not constitute an offer within the meaning of the Civil Code and other relevant laws. Copying, modifying and reproduction of the catalogue in any form: written, phonographic, electronic and other, without permission, is prohibited. Reprint of excerpts or any other use of materials available only with the consent of the author. Photos of the products shown in the catalogue are illustrative and may differ from the product, in fact. The manufacturer reserves the right to change the technical specifications or withdraw the luminaire from production without prior notification. 54

We invite you to contact our representatives WWW.FMP-AS.NO HEADQUARTERS FMP AS Borggate 2-4 1608 FREDRIKSTAD 996 92 862 906 14 844 INFO@FMP-AS.NO 55