1E 7 4 C4 RP3 626 ** Cylinder Core Function Standard Cam or Rings Standard

MORTISE AND RIM CYLINDERS CYLINDERS

1E SERIES TABLE OF CONTENTS Page Page 1E Series features...2 Eurocylinders...7 1E Series specs/how to order...2 Cylinders and cams...8 1E Series rings/spindles/mortise/service equipment...3 1E Cylinder special rings...9 1E Series special cylinders...4, 5 5E Series specs/accessories...10 1E7J4/1E7K4 high security cylinders...6 5E Series how to order...11 Patented keying system...6 1E SERIES FEATURES 1E Mortise Cylinder Standard mortise applications require use of BEST s 1E series cylinders with standard 1E-C4 cam. BEST cylinders may be altered to function with other manufacturers' locks by use of different cams (see page 8) and different cylinder rings (see page 9). Special cylinder variations are available for most applications (see pages 4 & 5). BEST cylinders are machined from brass or bronze bar stock and are available in a variety of finishes. Additional security is provided by a set screw that mounts diagonally in the cylinder wall and when tightened, holds the cylinder securely in the housing. BEST mortise cylinders feature the BEST interchangeable core and may be masterkeyed into any existing BEST system. Contact your local Stanley Security Solutions sales office for information on special cylinder applications not listed in this catalog. 1E Rim Cylinder Standard rim cylinder applications require the use of BEST s 1E rim cylinder series. BEST rim cylinders are interchangeable with other manufacturers rim cylinders. BEST rim cylinders are machined from solid bar stock and are available in a variety of finishes. The standard package for the BEST rim cylinder includes cylinder, RP3 ring package, 1E-S2 spindle, clamp plate and clamp plate screws. BEST rim cylinders feature the BEST interchangeable core and may be masterkeyed into any existing Best system. A Specifications Cylinder Dimension Door Nomenclature A Thickness 1E-64 1 1 8" 1 5 8" to 2 1 4" 1E-74 1 1 4" 1 7 8" to 2 1 2" Cylinder diameter 1 5 32" To order: example: 1E74-C4-RP3-626 Products covered by on or more of the following patents: 5,590,555 5,794,472 A Specifications Cylinder Dimension Door Nomenclature A Thickness 1E-62 1 3 16" 1" to 2 3 4" 1E-72 1 11 32" 1 1 4" to 3" Cylinder diameter 1 5 32" To order: example: 1E72-S2-RP3-626 HOW TO ORDER HOW TO ORDER STEP A B C D E F G 1E 7 4 C4 RP3 626 ** Cylinder Core Function Standard Cam or Rings Standard Diameter Housing Code Length Mortise Code Spindle Finishes 1E 1 5 32" 0 dummy 2 rim Blank standard C4 standard cam RP1 tapered cyl. 605 606 3E 1 1 2" 6 6 pin 4 mortise* 22 1 3 8" C181 Adams Rite RP2 6 pin mortise 612 613 5E see 7 7 pin 6 tapered 24 1 1 2" up to MS cam RP3 std. package 622 625 pages 10,11 housing mortise 96 6" S2 standard RP4 3E mortise 626 690 8E see accepts see pages 4-5 spindle page 7 all Best for special cores cylinders (see page 4-5) * For additional special mortise cylinders, see pages 4 and 5. ** Must specify keymark and number of keys or designate L/C for less core. (For special cams see page 8) (For special rings see page 9) Specify hand if required 2 MORTISE AND

STANDARD RINGS RP Standard Ring Package The RP standard ring package includes a 1E-R3 ( 3 16" ) and 1E-R5 ( 3 8" ) ring. 1E-R3 3 16" 1E-R5 3 8" STANDARD CAM Standard Cam for 1E-64, and 1E-74 Mortise Cylinders Unless otherwise specified, the 1E-C4 cam is supplied on all 1E mortise cylinders. Standard Commonly used cams are listed on page 8. 1E-C4 Cam If a cam other than the variety listed is needed, a sample cam should be forwarded to your local BEST office along with the lock manufacturer s name and lock series or identification number. STANDARD CAM RP1 Ring Package The RP1 ring package for the 1E-76 cylinder includes a 1E-R2 ( 1 8" ) and 1E-R3 ( 3 16" ) ring. 1E-R2 1 8" 1E-R3 3 16" SPINDLES 1E-S2 Spindle (Steel) - A-40100-SH 1E-S3 Spindle (Bronze) - A-40100-Z 5" Spindle - A-54950; 5 32" Spindle - A-40101 The 1E-S2 flat spindle is supplied standard on all 1E rim cylinders. If marine application is necessary, request marine construction (1E-S3 bronze spindle and non-ferrous materials supplied). A five (5) inch spindle is available for thick door applications. SPINDLES RP2 Ring Package The RP2 ring package for the 1E-64 cylinder includes a 1E-R2 ( 1 8" ) and 1E-R4 ( 1 4" ) ring. 1E-R2 1 8" 1E-R4 1 4" RP3 Ring Package The RP3 ring package for the 1E-62, 1E-72 and 1E-74 cylinders includes a 1E-R2 ( 1 8" ) and a 1E-R5 ( 3 8" ) MORTISE SERVICE EQUIPMENT ED211 ED211 Mortise Cylinder Wrench ED212 The BEST mortise cylinder wrench and test handle is an essential dual-purpose tool. The double end is used primarily to install or remove BEST mortise cylinders without marring the cylinder surface finish. The single end may be used to test the lock operation, as well as align the throw pins. To order specify: ED211 mortise cylinder wrench. ED212 Mortise Cylinder Cam Assembly Tool Mortise cylinder cams are quickly changed with the use of this tool. Approximate length 1 3 4". To order specify: ED212 assembly tool. ED221 Mortise Cylinder Thread Repair Die Tool for re-threading 1 5 32" diameter cylinders. To order specify: ED221 thread repair die. SERVICE EQUIPMENT 1E-R2 1 8" 1E-R5 3 8" ED222 Cylinder Cam Testing Tool Special cylinder / wrench assembly. Screws provide rapid means to install cams for testing. To order specify: ED222 cam testing tool. ED225 Hole Tap For 1 5 32" Mortise Cylinder Tap tool used to re-thread housing threads for 1E mortise cylinders. A40095 Standard Throw Pins RIM CYLINDERS 3

1E SERIES SPECIAL CYLINDERS Special Length Mortise Cylinders Specifications Uses: Special thickness doors Length: See chart Cam: Standard 1E-C4 cam (see page 2) supplied unless otherwise specified. Rings: The RP2 (for 6 pin) and RP3 A * (for 7 pin) package are supplied standard (page 2) unless otherwise specified. 1E74 To order: Designate desired length from chart under length code step D as shown (page 2). Example: 1E-74-32 1 1 2" Diameter Mortise Cylinder Specifications Diameter: 1 1 2" Length: 6 pin 1 1 8" ; 7 pin 1 1 4" Door thickness: 6 pin 1 5 8" to 2 1 4" (includes trim) 7 pin 1 7 8" to 2 1 2" Cam: Standard 3E-C3 cam supplied unless otherwise specified. Rings: The RP4 ring package is supplied with 3E cylinders. This package includes a 3E-R2 ( 1 8" ) and a 3E-R4 ( 1 4" ) ring. To order: Designate 3E on step A of order procedure (page 2) Example: 3E-74-C3-RP4-626 Options: 3E-04-Dummy, 3E-7A4-Turn knob, 3E-7B4-Dust Cover. Adaptor ring to allow 1E74 cylinders to fit a 3E tapped hole - A26139. Dummy Mortise and Rim Cylinders Specifications Length: Mortise 1 1 8" ; Rim 1 1 8" Rings: Ring packages are supplied standard as follows: Mortise: RP2 ring package(see page 2) Rim: RP3 ring package (see page 3) To order: Designate 0 on step B of order procedure (page 2) Example: 1E-02,1E04-slot in back- 1ESPL-6-B4619 1E04-slot in back-1espl-7- B4620, 1E02-slot in face-1espl-6-a5035, Special 1E04 with slot on back- 1ESPL-7-B4620. Special length 1E04 cylinders: 1 1 2" 1ESPL-7- A9619 1 3 4" 1ESPL-7-A20331 1E04 1E02 A * 3E74 * Reference to Length "A" on Mortise Cylinder Length Chart. Mortise Cylinder Length Chart Length Designate this number "A" on step D of order procedure (page 2) 1 3 8" 22 1 1 2" 24 1 5 8" 26 1 3 4" 28 1 7 8" 30 2" 32 2 1 8" 34 2 1 4" 36 2 1 2" 40 2 3 4" 44 3" 48 3 1 2" 56 4" 64 4 1 2" 72 5" 80 5 1 4" 88 6" 96 Taper Head Mortise Cylinder Specifications Length: 6 pin 23 /32" ; 7 pin 3 4" Door thickness: 6 pin- 1 3 8" to 1 3 4" (including trim) 7 pin 1 3 8" (including trim) 7 pin 1 3 4" (without trim) Cam: Standard 1E-C4 cam supplied unless otherwise specified. A * 1E76 Rings: The RP1 ring package (page 2) is supplied standard with all 1E taper cylinders (page 2). To order: See page 2. Example: 1E-76-C181-626 Riveted cams Screw-on cams Turn Knob Cylinders Specifications Length: Mortise- 6 pin 1 1 8" ; 1E6A4 Mortise- 7 pin 1 1 4" - 1E7A4 Rim- 6 pin 1 3 16" - 1E6A2 Rim- 7 pin 1 11 16" - 1E7A2 Cam: Standard 1E-C140 cam 1E7A4 supplied unless otherwise specified (see page 2). Rings: Ring packages are supplied standard as follows (unless otherwise specified): Mortise 6 pin: RP2 ring package (see page 2) Mortise 7 pin: RP3 ring package (see page 2) Rim 6 and 7 pin: RP3 ring package (see page 2) To order: Designate A4 on step C of order procedure (page 2). Example: 1E-7A4-C140-RP3-626 R-function turn knob cylinders, RH-1ESPL-7-B35401, LH-1ESPL- 7-B35405 Special length cylinders 1.5"-1ESPL-7- A20336 1.75"-1ESPL-7- A20337, 2"- 1ESPL-7-B23409 Note: These should not be used in conjunction with deadbolt function BEST mortise locks. To order the old style UP thumb turn contact your local BEST dealer. 4 MORTISE AND

Mortise and Rim Cylinders with Dust Covers Specifications Length: Mortise- 6 pin 1 1 8" ; 7 pin 1 9 32" Rim- 6 pin 1 3 16" ; 7 pin 1 11 32" Cam: Standard 1E-C4 cam (see page 4) 1E series supplied unless otherwise specified. Rings: Ring packages are supplied standard as follows (unless otherwise specified): Mortise 6 pin: 1E7B4 RP2 ring package (see page 2), Mortise 7 pin: RP3 ring package (see page 2) Rim 6 and 7 pin: RP3 ring package (see page 2) To order: Designate B4 on step C of order procedure (page 2). Example: 1E-7B4-C4-RP3-626 Mortise Cylinder Direct Motion Cam Specifications, slabbed, threaded to the head Length: 6 pin 1 5 16" ; 7 pin 1 15 32" From head to cam Cam: C228 - cabinet cylinder cam standard. Cam prevents key from being withdrawn in unlocked position. Rings: The RP2 ring package is supplied standard for 6-pin and 1E7D4 7-pin unless otherwise specified (page 2) To order: Designate D4 on step C of order procedure (page 2). Example: 1E-7D4-C228-RP3-626 To order with a utility cam lengths from 5 8" - 3 1 2" 1 3 4"- cylinder length (RH) 1ESPL-7-A10623 x C228 (LH) 1ESPL-7-A10624 x C228 2 3 4"- cylinder length (RH) 1ESPL-7-A8774 x C228 Standard Mortise Cylinder Lost Motion Cam Specifications Length: 6 pin 1 1 8"; 7 pin 1 1 4" Cam: 1E-C230 - cam supplied standard 1E-C230 is cam 1E-C4 (page 2) set up for lost motion. Specify cylinder handing as for hand and side of door. 1E7F4 Examples: RHO (Right Hand Outside); RHI (Right Hand Inside); LHO (Left Hand Outside); LHI (Left Hand Inside). Rings: The RP2 ring package is supplied standard for 6-pin and 7-pin unless otherwise specified (page 2) To order: Designate F4 on step C of order procedure (page 2). Example:1E-7F4-C230-RP3-626-RHO SPECIAL CYLINDERS Square Head Mortise Cylinder-Wrench Resistant For use in Narrow Stile Doors Specificatons Length: 6 pin 1 1 4" ; 7 pin 1 13 32" Cam: As specified on order (see page 8 for cams available) Rings: Package includes special 5 8" slip ring To order: Designate C4 on step C of order procedure (page 2) 1E7C4 Example: 1E-7C4-C181-R1010 ( 5 8" length)- 626 Other length rings are available. Slabbed Cabinet Mortise Cylinder Lost Motion Cam Specifications Length: 6 pin 1 1 8" (effective length) 7 pin 1 1 4" (effective length) Material: Solid brass or bronze Cam: C229- cam supplied unless otherwise specified (1E-C229, when ordered separate from unit). Specify hand: RH or LH 1E7E4 Rings: The RP2 ring package is supplied standard for 6 and 7-pin unless otherwise specified (page 2) To order: Designate E4 on step C of order procedure (page 2). Example: 1E-7E4-C228-RP3-626-RH Special Length: 2" cylinder length (1 1 4" effective length) RH-1ESPL-7A-9580; LH-1ESPL-7-A9577 2 1 4" cylinder length (2" effective length) RH-1ESPL-7-A8813; LH-1ESPL-7-A8812 Hotel/Motel Mortise Cylinder Shifting Cam Specifications Length: Mortise 6 pin 1 5 16" ; 7 pin 1 15 32" Cam: C258 or cam supplied as specified (see page 8) Rings: The RP2 ring package is supplied standard for 6-pin and 7-pin unless otherwise specified 1E7G4 (page 2) To order: Designate G4 on step C of order procedure (page 2). Example: 1E-7G4-C258-RP3-626 1E SERIES RIM CYLINDERS 5

HIGH SECURITY SERIES 1E HIGH SECURITY CYLINDERS 1E7J4 1E7K4 Cylinder Features Designed for high security applications, BEST offers the 1E7J4 high security cylinder and special 5C interchangeable core. This special cylinder is listed by Underwriters Laboratories as meeting UL437 standard for key locks. The patented cylinder provides additional strength through a hardened stainless steel alloy ring, face and keyway disc. It can be masterkeyed into any BEST masterkey system. Cylinder also conforms to ANSI A156.5 mortise cylinder, Grade 1A. The 1E7J4 cylinder must be combinated at the factory. The 1E7K4 cylinder is available where UL listing is not a requirement, and can be ordered uncombinated. Note 1: The 1E7J4 cylinder meets UL437 standards only when used with a 36H/37H mortise case. Note 2: Both 1E7J4 and 1E7K4 require long blade key for operation. 1E7J4 1E7K4 Cylinder Specifications. 1.150-32 (NS-2A) threaded mortise cylinder. Mounting length: 7 pin 1 1 16". Material: Brass (cylinder) and stainless steel ring. Finish: 630 (nickel plated satin stainless steel material). Cylinder rings: High security wrench resistant, machined from stainless steel, hardened, and nickel plated. Special door preparation required. Diameter of hole 1 3 4". Cylinder face, Keyway disc.: Stainless steel, hardened Cam: Supplied with C258 cam. See page 8 for special cams. To order: Designate "J4" or "K4" on Step "C"order procedure. (see page 2.) 1E7J4 High Security Cylinder 1E7K4 High Security Cylinder MX8 PATENTED KEYING SYSTEM MX8 PATENTED KEYING SYSTEM One of the greatest threats to key control within your facility is the unauthorized duplication of keys; one simple solution is the use of the MX8 Patented Keying System by Stanley-Best Access Systems a patent-protected keying system. Very seldom can a single product meet all of your exact needs, and often your level of convenience must be sacrificed to fit the capabilities of the product.the MX8 Patented Keying System provides you with an significant amount of flexibility, enabling a solution that fits your unique balance between security and convenience. The MX8 Patented Keying System is available in two series of keyways, the M Series and the X Series. Each series offers a different blend of features to help you maximize convenience while optimizing your security. The MX8 Patented Keying System has the ability to provide geographic exclusivity to the customer. M Series Keyway Features Patented keys operate both MX8 and Standard BEST cores (backward compatibility) with existing BEST keyways (JKLM only). Standard keys do not operate MX8 cores. Available in large bow, long blade, and long nose key blanks to work with special applications. Available in core designs for use in special application locks, such as high security mortise, hotel cylinders, and glass display-case locks. Utilizes the same combinating kits and key cutting equipment as the Standard BEST keyways. M Series keys operate MX8 cores and Standard (non-patented) BEST cores. Standard key blanks do not operate MX8 cores. MX8 Key & Core X Series Keyway Features Distinctive key design includes thicker key blanks with larger bow for added strength and easier handling. Keyways are unique to MX8 Patented Keying System offering even higher key duplication protection. Requires only minor modifications to key cutting equipment to accommodate new keyways. X Series keyways utilize the standard combinating kit, minimizing the expense of system changeover. X Series keys only operate MX8 cores. 6 MORTISE AND

SPECIAL EUROPROFILES Mortise locksets from a number of different international manufacturers can be incorporated into your BEST masterkeyed system by replacing the cylinder with a Best Eurocylinder and 3C European interchangeable core. When ordering, please specify the lock manufacturer s name and their model number. Some Euro profile cylinders will accept Best standard core rather than the 3C core. Please specify the E option when ordering standard cores for use in Eurocylinders. The most popular of the European adaptations is for the Europe an cylinder. Best Access Systems order nomenclature and several required critical dimensions are listed below. Please specify, as requested when ordering. EUROCYLINDERS EUROCYLINDERS Flush Mount Cylinder Retaining Screw Rabbeted Mount 8E7E5 Europrofile* (* Requires use of 3C core) Rabbeted Mount Front View 8E7H6 for locks manufactured in Germany Critical Dimensions - Europrofile A Dimension to center of lockset case. Determined by measuring from set screw location to outside of door face. B Door thickness. C Dimension from center of key rotation to center of handle rotation, if other than 72mm. Maximum allowed 114mm. Minimum allowed 37mm 3C European Core HOW TO ORDER: EUROPROFILE 8E7E5 25mm 45mm 65mm Keyed Alike 619 Eurocylinder A Dimension B Dimension C Dimension Keying Finish: 619 - Satin Instructions Nickle Plated 626 - Satin Chrome Plated RIM CYLINDERS 7

CYLINDERS AND CAMS CYLINDERS AND CAMS Special cams are available which will operate most mortise locksets, regardless of make or function. With these cams,your masterkeyed system can be extended through the use of replacement cylinders with cams similar to those being used. A few of the cams are illustrated. Other designs are available upon request. All cams available are designed for use on BEST mortise cylinders. WARNING Best Access Systems desires to provide up-to-date and reliable product adaptation uses. However, BEST cannot guarantee the quality of other manufacturers' locksets. In addition, other lock manufacturers' may make changes to their product that affect the operation and compatibility of our core and cylinder adaptation. When this occurs, those manufacturers' have no obligation to notify BEST. If you are using a BEST cylinder in another manufacturers' lockset and find that it does not operate properly for any reason, please contact your local BEST sales office immediately. NOTE: Cams not drawn to scale C4 step E, page 2) 1E - C4 C118 step E, page 2) 1E - C118 C127 step E, page 2) 1E - C127 C128 step E, page 2) 1E - C128 C129 step E, page 2) 1E - C129 C136 step E, page 2) 1E - C136 C161 step E, page 2) 1E - C161 C181 step E, page 2) 1E - C181 C191 step E, page 2) 1E - C191 C208 step E, page 2) 1E - C208 C210 step E, page 2) 1E - C210 C258 step E, page 2) 1E - C258 NOTE: While certain functions may require a different cam, in general the following cams will work for these common applications. C265 step E, page 2) 1E - C265 C4...Standard cam C127...Arrow mortise (latch) C161...Corbin-Russwin mortise Arrow mortise (deadbolt) C181...Adams Rite C191...Best mortise (latch) C208...Sargent C258...Best mortise (deadbolt) C265...Schlage L mortise 8 MORTISE AND

1E-R7 RING CHART Overall Nomenclature Nomenclature Length if Ordered if Ordered Available With Cylinder Without (see step F page 2) Cylinder 1 8" R702 1E-R702 3 16" R703 1E-R703 1 4" R704 1E-R704 5 16" R705 1E-R705 3 8" R706 1E-R706 7 16" R707 1E-R707 1 2" R708 1E-R708 9 16" R709 1E-R709 5 8" R710 1E-R710 11 16" R711 1E-R711 3 4" R712 1E-R712 SPECIAL RINGS 1E-R7 Straight Ring Specifications - 1E-R7 To be used with BEST 1E series (1 5 32" ) Cylinders. Dimensions inside diameter- 1 5 32", outside diameter 1 5 16" length-see chart at left. Material solid brass or bronze Finish available in 605, 606, 612, 613, 625 and 626 1E SERIES 1E-R8 RING CHART Overall Nomenclature Nomenclature Length if Ordered if Ordered Available With Cylinder Without (see step F page 2) Cylinder 1 8" R802 1E-R802 3 16" R803 1E-R803 1 4" R804 1E-R804 5 16" R805 1E-R805 3 8" R806 1E-R806 7 16" R807 1E-R807 1 2" R808 1E-R808 9 16" R809 1E-R809 5 8" R810 1E-R810 11 16" R811 1E-R811 3 4" R812 1E-R812 13 16" R813 1E-R813 7 8" R814 1E-R814 15 16" R815 1E-R815 1" R816 1E-R816 1E-R8 Tapered Slip Ring- Wrench Resistant Specifications - 1E-R8 To be used with BEST 1E series (1 5 32" ) Cylinders. Dimensions inside diameter - 1 5 32", inside rim counter-bored to protect cylinder head. Outside diameter - tapered 1 1 2" to 1 29 64" length-see chart at left. Material solid brass or bronze Finish available in 605, 606, 612, 613, 625 and 626 RIM CYLINDERS 9

5E SERIES UTILITY CYLINDER LOCK 5E 3 /4" Cylinder Specifications The 5E utility cylinder lock fits standard 3 4" diameter cylinder installations such as wood or metal desks,file cabinets, vending machines, utility and storage cabinets, elevators and security alarm control panels. The complete 5E assembly includes a combinated 3 4" cylinder with cam, hex nut, lock washer and spacer collar. Maximum mounting surface thickness 5E utility cylinder locks may be mounted on surfaces with the following maximum thickness: 5E6 11 16", 5E7 27 32" Keying May be keyed individually, keyed alike or masterkeyed into a new or existing Best standard masterkeyed security system. Service 5E cylinders may be recombinated and serviced onsite. Special service equipment is available (see Service Equipment Section of Best catalog). Finish 626 satin chrome only 5E Combinating and Service Accessories Nomenclature Item A-8049 5E 3 /4" Hex Nut A-21068 Washer for cylinder body head A-4845 Cam Screws A-4045 Lock washer for cam screws 5ED261 5E capping block 5ED253 5E thread tap - 3 /4" x #24 5ED254 5E 3 /4" metal punch and die set (slab) 5ED262 5E cap depressor 5ECP6 Slide cap - 6 pin 5ECP7 Slide cap - 7 pin 5ES1 5E springs *NOTE: The 5E lock is not available for Premium and Peaks keying systems. Refer To The Following Procedure When Ordering See Order Example At Bottom Of Next Page. A Cam Motion and Degree of Rotation When ordering 5E cylinders, specify the cam motion type and degree of rotation. Available cam motion types are listed below. Different type motions are limited to different degrees of key rotations. Type A Direct motion - Key and cam rotation is direct. Key may be removed in locked position only. Motion is 360 degrees right or left. Type B Limited motion - Key and cam rotation is direct. Key may be removed in locked position only. Motion is limited to 90 degrees or 180 degrees right or left. Type C Lost motion. Cam rotates 90 degrees right or left. Key rotates 360 degrees. Key removal with cam in locked or unlocked position. Type D Throw member drive - Key and drive motion is direct. Key may be removed in locked position only. Motion is 360 degrees right or left. B 3 4" Determine Ring Length 7 8" A spacer collar may be required to position the cam for proper lock operation. The spacer collar is installed between the 5E cylinder head and the mounting surface. To determine the proper length of the spacer collar, add together: the desired distance from the cam to the inside of the mounting surface ( A above) to the measured thickness of the mounting surface ( B above). Then, subtract this total from: 31 32" when installing a 5E6, or 1 1 8" when installing a 5E7. The remainder is the collar length, which is illustrated. To properly order spacer collars, designate the following nomenclature for the length desired: 5E Spacer Collar Length Chart Length Nomenclature To order separately 1 16" R701 5E-R701 1 8" R702 5E-R702 3 16" R703 5E-R703 1 4" R704 5E-R704 5 16" R705 5E-R705 3 8" R706 5E-R706 7 16" R707 5E-R707 1 2" R708 5E-R708 A B 10 MORTISE AND

C Select Proper Cam Type Cam Cams for 5E cylinders are available with a number of variations to suit the particular application as required. Two major variations that must be designated on the order are: A.) The cam type, and B.) The cam length. Cam Types The following cam types are available for the Best 5E cylinder. Other designs are available upon request. (See page 8) C1 C3 4A&4B 2A&2B Straight Cam Straight Cam Offset Cam Offset Cam Fixed Motion Lost Motion Lost Motion Fixed Motion 5E SERIES D Determine Cam Length Cam length is determined by measuring from center of the cam rotation to the tip of the cam. Straight Cam Length Code # 5 8" 10 3 4" 12 7 8" 14 1" 16 1 1 4" 20 1 1 2" 24 2" 32 2 1 2" 40 3" 48 3 1 2" 56 E Length Offset Cam Length Code # 1 1 16" 17 1 5 16" 21 1 13 16" 29 2 5 16" 37 2 13 16" 45 Cam Mounting Position and Cam Direction 1 11 32" 5E SERIES Cam Types Defined (Listed relative to motion/rotation) C1 Straight cam mounted for fixed motion operation (used in conjunction with type A and type B motions). To order cam separately, designate 5E-C1 and length from code chart at option D. C3 Straight cam mounted for lost motion operation (used in conjunction with type C cam motions). To order cam separately, designate 5E-C3 and length from code chart at option D. 2A Offset cam (inward mount) for lost motion operation (used in conjunction with type A and type B motions). To order cam separately, designate 5E-C2A and length from code chart at option D. 2B Offset cam (outward mount) for fixed motion operation (used in conjunction with type A and type B motions). To order cam separately, designate 5E-C2B and length from code chart at option D. 4A Offset cam (inward mount) for fixed motion operation (used in conjunction with type C cam motions). To order cam separately, designate 5E-C4A and length from code chart at option D. 4B Offset cam (outward mount) for lost motion operation (used in conjunction with type C cam motions). To order cam separately, designate 5E-C4B and length from code chart at option D. D Direct throw member drive and tailpiece. Throw pins engage cylinder to flat spindle tailpiece. The standard flat spindle tailpiece is 1 1 16" and may be cut to length desired. To order spindle separately, designate 5E-D. 2A & 4A Mounted Inward 3 o clock = 3 6 o clock = 6 9 o clock = 9 12 o clock = 12 2B & 4B Mounted Outward D Type Direct Throw Member Drive and Tailpiece Cams may be mounted in one of four "clock positions as pictured below. Designate cam mounting and rotation direction (right- R left- L ). Key is only removable in the locked position, unless ordering type C. (Available in locked and unlocked positions.) HOW TO ORDER A B C D E E A 5E 7 A 1 C R708 4B 20 12 R 90 626 Series Lock Keyway Combinating Cam Ring Cam Cam Mouting Cam Degree of Finish Body Code Motion Length Type Length Position Direction Rotation 5E 3 /4" 6-6 pin designate 1 uncomb. A-direct R701-1 /16" C1-fixed straight 10-5 / 8" 3 3 o clock R right 90 90 626 7-7 pin specific 2-A2 system B-limited R702-1 / 8" 2A-fixed offset in 12-3 / 4" 6 6 o clock L left 180 180 stankeyway 3-A3 system C-lost R703-3 /16" 2B-fixed offset out 14-7 / 8" 9 9 o clock (see E 360 360 dard (A,E etc.) 4-A4 system D-throw R704-1 / 4" C3-lost motion 16-1" 12 12 o clock above) (see A see note page 10. member R705-5 /16" 4A-lost motion etc., in (see E above) page 10) drive R706-3 / 8" offset in 1 /16" of (see A etc. 4B-lost motion an inch page 10) (see B offset out (see D page 10) D-direct above) (see C above) RIM CYLINDERS 11

CYLINDERS For more information on Stanley Security Solutions products, services, and office locations visit our web site at www.stanleysecuritysolutions.com Product information contained in this catalog has been com piled and presented with as much care and com plete ness as is reasonably possible. Errors or mistakes may be present, and in many cases, reliance has been placed on information supplied by other manufacturers which may be in error or which may be subject to changes or mod i fi ca tions by the man u fac tur er with out no tice and without obligation. Therefore, no guar an tee can be made or should be assumed or implied with regards to product in for ma tion con tained in this catalog. Stanley Security Solutions, Inc. 6161 E. 75th Street Indianapolis, Indiana 46250 www.stanleysecuritysolutions.com 2009 Stanley Security Solutions, Inc. and Stanley Logistics 10M 709 FP BAS030