428 MY HOME Structured cabling system for the home sector
CONTENTS MY HOME Structured cabling system for the home sector General features. 384 General rules for installation. 400 Wiring diagrams. 404 Structured cabling system for the home sector MY HOME 429
GEnEraL FEaTUrES What is the structured cabling system for the home sector? The advancement of multimedia services, such as satellite TV and terrestrial digital systems, internet telephone systems and television, have highlighted the need for a specific cabling system inside the house, ensuring the distribution of the available services across various rooms, avoiding the implementation of untested solutions, which may have unpredictable results always attentive to technological development and to the above stated needs, BTicino offers an ideal and convenient solution for the creation of a communication area inside the distribution board, which centralises the devices for the distribution of the Telephone System, and the Television and data signals a star system is used to connect the cables from the distribution board to the user sockets in the various rooms of the house Communication area remote control device Telephone line Internet system Communication area inside the MY HOMe Flatwall distribution board 430 MY HOME Structured cabling system for the home sector
T MY HOME AUTOMATION SYSTEM APPLICATIONS The home structured cabling system allows the integration of devices for the control of the MY HOME functions a Multimedia Touch Screen can be connected to the data network to control all the home By integrating the Web Server to the network, it will be possible to remotely control the MY HOME system using a computer or mobile phone connected to the internet Data automation functions from a room of the house, allowing the user can take advantage of multimedia contents (audio and video) stored inside other PCs connected to the network Telephone system Multimedia Touch Screen 0 Touch Screen 3,5 Structured cabling system for the home sector MY HOME 43
GEnEraL FEaTUrES The devices for the distribution of data, telephone and tv Telephone distribution frame F555 it can be used to distribute telephone line to 8 different sockets, or 2 telephone lines to 4 sockets. xdsl filter with telephone distribution frame F558 to separate the ADSL data line from the Telephone line. The Telephone line is available on 3 independent outputs. Access Gateway Access Gateway Power supply F552 it provides 9 V,.6 A, voltage for the supply of active devices. 432 MY HOME Structured cabling system for the home sector
Patch module for patching inside the user socket wiring distribution board. Wire and patch cord connections are concealed inside the distribution board and cannot be seen by the user. Switch F55 for the distribution of data line to 4 different rj45 sockets. 6-way distribution frame F553 for the distribution of the television signal to 6 different TV jacks. Web Server F454 for local and remote management of MY HOMe applications. Structured cabling system for the home sector MY HOME 433
GEnEraL FEaTUrES application examples: telephone, data, TV/SaT, iptv and video door entry system This drawing shows the possibility of distributing, in addition to telephone and data signals, also the iptv service TV/SaT and digital signals in order to make the iptv signal available to the corresponding decoder, it will be necessary to install, inside the communication distribution board, of a special Gateway access device supplied by the Supplier of the iptv service IPT rj45 sockets Flatwall jacks 434 MY HOME Structured cabling system for the home sector
The following devices are installed inside the distribution board: Gateway access supplied by the supplier of the iptv service data switch F55 TV/SaT distribution frame F553 Telephone distribution frame F555 Patch modules xdsl filter with telephone distribution frame F558 MY HOMe video door entry system Structured cabling system for the home sector MY HOME 435
GEnEraL FEaTUrES application examples: telephone, data and integration with MY HOME for local and remote function control This drawing shows the possibility of installing a data and telephone distribution system integrated with the MY HOME system, for local and remote function control integration is made possible by using the Web Server device, which operates as a bridge between the BUS wiring of the MY HOME system, and the data network wiring system This solution makes it possible to use the 0 Multimedia Touch Screen to control the home automation functions, and to share the multimedia content of other storage devices connected to the data network if the network has an internet connection, it will be possible to control all the home automation function also remotely, using a PC, or a mobile phone The following devices are installed inside the distribution board: Gateway access supplied by the supplier of the adsl service Web Server F454 data switch F55 TV/SaT distribution frame F553 jacks Multimedia Touch Screen 0 DSL InTerneT SerVICe rj45 sockets remote control device 436 MY HOME Structured cabling system for the home sector
xdsl filter with telephone distribution frame F558 Telephone distribution frame F555 Patch modules Flatwall Structured cabling system for the home sector MY HOME 437
GEnEraL FEaTUrES Cabling structure and components for the home sector Home structured cabling requires a STar type structure: the user socket connection cables meet in a central point called star centre or communication area This is the area where the connections with the access networks for distribution of various services (Telephone system, TV/SaT ), as well as all active information management and distribution devices, are located in general, the communication area is created by grouping together all the devices in an appropriate distribution board to be installed near the general distribution board of the home in new or refurbished homes, where the MY HOME FLaTWaLL solution has been selected as the general electric distribution board (for example, to also centralise the MY HOME devices), the communication area must be created inside the distribution board itself User socket User socket User socket Communication areas inside the MY HOMe FLATWALL distribution board 438 MY HOME Structured cabling system for the home sector
in addition to the distribution board the following items can be identified: Signal handling and distribution devices; Cables for the connection of the devices to the various user sockets; User sockets with connectors split by service type User socket User socket User socket Structured cabling system for the home sector MY HOME 439
GEnEraL FEaTUrES Cabling structure and components for the home sector THE DEVICES FOR THE DISTRIBUTION OF SIGNALS The management of the data network To ensure the connection of several computers to the data network and the sharing of the internet connection, the Switch device F55 must be used Switch F55 The internet network connection The connection to the internet network requires an adsl modem, which may also be supplied by the internet Service Provider (isp) WIRING DIAGRAM rj45 socket Patch modules rj45 socket L4665L20/L40 patch cord IP Switch F55 To the ADSL modem 440 MY HOME Structured cabling system for the home sector
XDSL filter F558 The management of telephone signals The telephone signal does not require any special management devices, with the exception of a special filter F558, which separates the telephone signal from the digital signal for the adsl modem The device has 3 filtered outputs for the connection of three telephone jacks For more complex systems, a distribution frame F555 can be used to replicate one telephone line to eight output lines intended for the respective telephone connectors For a detailed description of the listed devices see the corresponding technical sheets. WIRING DIAGRAM rj45 socket Patch modules rj45 socket T XDSL filter F558 L4665L20/L40 patch cord rj45 socket Telephone distribution frame F555 rj45 socket Telephone line TV/ Structured cabling system for the home sector MY HOME 44
GEnEraL FEaTUrES Cabling structure and components for the home sector Patch module The management of the television signals The distribution of the television signal (both terrestrial and satellite), to several TV jacks, is entrusted to the TV/SaT distribution frame F553, which has one input connector and six output connectors if the aerial system provides mixed analogue and digital signals, only one device will be needed if, on the other hand, the system provides two separate signals, one analogue and one digital, with separate cables, one distribution frame and the corresponding TV connectors shall be used for each signal WIRING DIAGRAM Socket rj45 Patch module Socket rj45 Patch cord L4665L20/L40 Switch F55 Telephone distribution frame F555 Socket rj45 Socket rj45 442 MY HOME Structured cabling system for the home sector
Signal patching With this operation it is possible to reconfigure over time the correspondence between the user sockets and the devices in the communication area it is performed using special patch modules, to which the wiring cables are connected The connection with the devices is performed using patch cords L4665L20 and L4665L40 The special geometrical conformation of the device (vertical cable input) means that the wiring and the patch cords can be concealed inside the communication distribution board distribution frame F553 WIRING DIAGRAM socket socket socket distribution frame F553 socket system socket SAT decoder Structured cabling system for the home sector MY HOME 443
GEnEraL FEaTUrES Cabling structure and components for the home sector THE WIRING in home structured cabling systems two types of cables are used: coaxial cables for the distribution of the television signal; 4 pair twisted cable for the transmission of telephone and data signals The CEi 306-2 (*) guide calls for a so-called basic wiring characterised by cable with 4 symmetrical pairs and Coaxial cable destined to the corresponding rj45 type connectors for data transmission, and to coaxial connectors for the television The same guide recommends a so called advanced wiring, characterised by 2 cables with 4 symmetrical pairs for data/telephone services, and 2 coaxial cables for TV signals COAXIAL CABLE The coaxial cable consists of a central rigid or flexible conductor, insulated, using dielectric material, from an external cylindrical conductor called shield The Coaxial cable for Television applications has a characteristic impedance of 75 Ohms and a diameter between 4 and 7 mm Cavo COAXIAL CABLE WITH 4 SYMMETRIC PAIRS Used for data and telephone transmission, this cable consists of 4 pairs of twisted cables it is available with (STP, S-FTP) or without (UTP) external shield For both, the characteristic impedance is 00 Ohms The performance in terms of maximum frequency of the transmitted signal, is expressed in categories as below: Category 5: data transmission up to 00 Mbit/s Category 5e: data transmission up to 000 Mbit/s (00 MHz) Category 6: data transmission up to 000 Mbit/s (250 MHz) Category 6a: data transmission up to 0 Gbit/s (500 MHz) due to the current transmission requirement, the CEi guide recommends 5e category cables However, in order to prepare the network for future applications, category 6 or 6a cables are recommended The typical use requires capping with rj45 connectors Unshielded cable (UTP) note (*): CeI 306-2. Guide for telecommunication and multimedia distribution wiring inside residential buildings. Shielded cable (STP) 444 MY HOME Structured cabling system for the home sector
THE USER SOCKET in the system configuration described so far, each branch of the Star centre reaches, and ends in, a user socket normally consisting of one or more connectors There are two types of connectors for the home data network: TV signal coaxial connector rj45 standard connector with 8 contacts for telephone system and data signals TV COnneCTOrS L4202D HC4269F HS424D n420d L4269F Shielded TV and SAT COnneCTOrS in die-cast enclosure Data network and telephone system connectors nt4279c6 L4279C6 AM5979C6 n4279c6 rj45 connectors For the connection of telephone devices with rj connectors to rj45 type connectors, the use of the rj45/rj adapter cable, L4664, is recommended Structured cabling system for the home sector MY HOME 445
Main requirements STANDARDS The design and installation of the home data network system must be performed following the indications and requirements contained in the following documents: CEI 306-2: Guide for telecommunication and multimedia distribution wiring inside residential buildings CEI 64-00/: residential building Guide for the presetting of the infrastructures for electric, electronic, and communication systems Part : Building risers CEI 64-00/2: residential building Guide for the presetting of the infrastructures for electric, electronic, and communication systems Page 2: dwellings (apartments) CEI EN 5073-: information technology - Structured cabling systems Part : General requirements CEI EN 5073-4: information technology - Structured cabling systems Page 4: Homes DESIGN CRITERIA during the design of the home data network system, it is important that the following aspects are defined in orderly sequence: Functions required (data, Telephone system, TV); Selection of the installation solutions based on the features of the building irrespective of the type of system and the required functions, it is necessary that the PLaniMETrY, as well as a GEnEraL FUrniTUrE PLan, are made available to the installer it must also be considered that on a design and installation point of view the creation of a home data network system is not very different from that of a traditional electric power system Selection of the cable by application type DEFINITION OF THE FUNCTIONS REQUIRED The design of the data network system requires a good knowledge of the multimedia functions to be installed around the home as a way of example, attached is the table of CEi 306-2 guide For each application this table shows the features of the corresponding wiring setup to be implemented for the multimedia network CABLES SERVICE BAND CABLE USED TV (terrestrial + satellite) 47...250 Mhz COAXIAL Traditional telephone system* Mhz symmetric pair LAN Gb/s 4 symmetric pairs * In order to take advantage of the flexibility of the home wiring system, it is recommended that also for the telephone system service a 4 symmetrical pair cable is used, connected to a RJ45 socket, instead of the traditional twisted pair connected to the RJ/2 socket. In this case, the same rj45 socket used to connect the pc to the local ethernet network can be reused, for example, to connect a standard analogue telephone to the telephone line, without any intervention required on the horizontal wiring. The only action needed will be the patching of the termination of the corresponding cable in the Star centre, moving the connector from the ethernet switch to the telephone distribution frame. To connect a telephone unit with rj socket to the rj45 socket, use the corresponding cable rj/ rj45 L4664. 446 MY HOME Structured cabling system for the home sector
Creation of the communication area On an installation point of view, it is recommended that the communication area is split in two specific zones: zone for the installation of Gateway access devices zone for home wiring devices ZONE FOR GATEWAY ACCESS DEVICES This area is occupied by all active and non active equipment, with corresponding wiring for the connection of the electric services coming from the outside of the home, such as: Telephone line; TV/SaT system from the central unit downstream the aerials an example of active device for this area is the adsl modem with integrated switch, and if applicable the Gateway device for the signals coming from the optic fiber network On the other hand, a non active device can be the filter for the separation of the telephone signal from the adsl data signal For the operation of active devices, it will be necessary to allow for 230 V power supply sockets, with the corresponding disconnection and protection devices in case of indirect contact and overload it must be considered that both devices and wiring of the telephone and data networks must be kept separate from the 230 V electric power supply devices and wiring it will therefore be necessary to also allow for partitions or similar solutions for the separation of the systems if the FLaTWaLL switchboard is used, a specific compartment is available for the installation of multimedia devices ZONE FOR HOME WIRING DEVICES This area is occupied by the patch modules connecting the user sockets to the Star centre, as well as all devices for the appropriate distribution of the various signals to the sockets themselves Zone for home wiring devices Zone for Gateway Access devices Structured cabling system for the home sector MY HOME 447
GEnEraL rules FOr installation Positioning of the user sockets it is recommended that 2 rj45 sockets (data and telephone) and TV jack are installed in each room, every 3 75 m of the perimeter of the room (ref CEi En 5073-4) The number of sockets in each room must, in any case, be such that from each zone it will be possible to reach the user point using a PC or telephone connection cord not longer than 5 metres without causing any transit problems inside the room Obviously, this requirement must be assessed also taking into account the current or future position of the furniture, so that DIAGRAM the use of of the user sockets is not prevented by the positioning of the furniture For the power supply of the connected devices, on the side of each user socket one or more 230 V power supply sockets must ROOM TYPE Kitchen Main bedroom Second bedroom Living / sitting room Study Tavern Gym Technical room (laundry room/boiler room, etc.) also be installed, inside dedicated device holding boxes if no precise design is available, the miminum requirements recommended for each standard room of the house could be as follows: DEVICES TO BE USED RJ45 socket (on worktop level) + jack 3 RJ45 sockets (2 of which for the telephone on bedside cabinets) + jack 2 RJ45 sockets (bedside cabinet and desk) + jack 2 RJ45 sockets + jack 2 RJ45 sockets 2 RJ45 sockets + jack RJ45 socket RJ45 socket For the connection of telephone devices with rj connectors to rj45 type sockets, use the rj45/rj adapter cable L4664. Star centre distribution board example of a possible home wiring system. 448 MY HOME Structured cabling system for the home sector
User socket wiring in order to ensure access to all types of services (data, telephone system, and TV), the user socket must be fitted with rj45 connectors (female type), and coaxial connectors for aerial systems, with electric features compatible with the ones of the corresponding connection cables service and those for the telephone system will be available on all the pins of the connector, as shown in the following table Cat. 6 UTP Connectors RJ45 CONNECTORS For the connection of modular rj45 connectors to the 4 symmetric pair data cable, two solutions can be implemented, regulated by Tia/Eia 568a or Tia/Eia 568B standards respectively RJ45 APPLICATION Telephone system (analogue digital) ISDN Ethernet 0/00/000 Mps PIN NUMBER 2 3 4 5 6 7 8 From the table it is clear that pins 7 and 8 are not used. However, there are special applications that also require these pins. 2345678 rj45 connector EIA 568 cablato B secondo lo standard TIA/eIA 568B. These two standards are completely similar in terms of performance and supported applications The only difference is that pair 2 and pair 3 are switched The main trend is to install systems using the Tia/Eia 568B standard connection requirements By using this type of wiring, both the signals for the distribution of the data TV coaxial socket TV COAXIAL SOCKET For the distribution of TV services in the residential network wiring system it is necessary to install the Coaxial cable, which must be connected, in the user sockets, to the corresponding F or iec type TV jack (male type) The socket must be compatible with the cable features and must assure the transmission, without relevant attenuation, of the television signal with frequencies up to 2 50 GHz BTicino has a wide range of die-cast aluminium TV jacks for the distribution of TV SaT and FM radio signals Structured cabling system for the home sector MY HOME 449
Wiring diagrams System with 3 active telephone jacks and 4 active data sockets RJ45 sockets (*) (*) (*) (*) Star centre POTS+ADSL external telephone line F55 F552 PLT a b IN PLT F558 Power OUT a b LINE 230 Vac ADSL modem ITEM DESCRIPTION DIN MOD. QUANTITY F55 F552 F558 PLT L4665L40/L20 See catalogue Switch 0/00 Mbs Power supply ADSL filter Protect. against lightning Patch module Patch cable RJ45 connector NotE (*): sockets preset for future patching 4 2 2 7 450 MY HOME Structured cabling system for the home sector
System with 6 active telephone jacks and 6 active data sockets RJ45 sockets (*) (*) Star centre F555 F55 F552 F55 POTS+ADSL external telephone line L+L2 L L L2 L L2 Power PLT F558 230 Vac a b IN PLT OUT a b ADSL modem LINE ITEM DESCRIPTION DIN MOD. QUANTITY F558 PLT F555 F55 ADSL filter Protect. against lightning Tel. distribution frame Switch 0/00 Mbs NotE (*): sockets preset for future patching 2 2 4 4 2 ITEM DESCRIPTION DIN MOD. QUANTITY F552 L4665L40/L20 See catalogue Patch module Power supply Patch cable RJ45 connector 4 5 4 Structured cabling system for the home sector MY HOME 45
Wiring diagrams System with Gateway access, 6 telephone jacks, 4 data sockets, jack, and 6 jacks RJ45 sockets Star centre F555 F55 F552 Power POTS+ADSL external telephone line L+L2 L L L2 L L2 230 Vac PLT a b IN F558 Gateway access (*) PLT output OUT a b LINE ITEM DESCRIPTION DIN MOD. QUANTITY (*) F558 PLT F555 F553 F55 Access Gateway ADSL filter Protect. against lightning Telephone distrib. frame Hub TV Switch 0/00 Mbs NotE (*): Device supplied by the supplier of the service 2 2 4 4 4 ITEM DESCRIPTION DIN MOD. QUANTITY F552 L4665L40/L20 See catalogue See catalogue Patch module Power supply Patch cable RJ45 connector TV connecor 4 6 452 MY HOME Structured cabling system for the home sector
Television set with integrated DTT decoder (if the television is not fitted with one, connect it to the TV jack using an external DTT decoder) decoder SAT receiver TV jacks type 424D F553 Down from aerial TV distribution board with mixer Structured cabling system for the home sector MY HOME 453
Wiring diagrams System for distribution of telephone system, data network, signal RJ45 sockets Star centre F555 F55 F552 F55 F552 Power Power POTS+ADSL external telephone line L+L2 L L L2 L L2 230 Vac 230 Vac PLT a b IN F558 PLT OUT a b ADSL Modem LINE 454 MY HOME Structured cabling system for the home sector
B variant Down from aerial TV central unit IF/IF central unit Multiswitch DTT decoder SAT receiver TV TV jacks type 424D F553 TO THE MY HOME VIDEO DOOR ENTRY SYSTEM ITEM DESCRIPTION DIN MOD. QUANTITY F558 PLT F555 F55 F552 F553 L4665L40/L20 See catalogue See catalogueo ADSL filter Protect. against lightning Telephone distrib.frame Switch 0/00 Mbs Patch module Power supply Hub TV Patch cable RJ45 connector TV connecor 2 2 4 4 4 2 2 3 6 Structured cabling system for the home sector MY HOME 455
Wiring diagrams System with Wireless router modem external to the distribution board for the management of 4 data sockets RJ45 sockets IN OUT RJ45 sockets Star centre F555 F55 F552 Power POTS+ADSL external telephone line L+L2 L L L2 L L2 PLT a b IN PLT 346020 230 Vac OUT a b LINE Modem (*) ITEM DESCRIPTION DIN MOD. QUANTITY F558 PLT F555 F55 F552 L4665L40/L20 See catalogue ADSL filter Protect. against lightning Telephone distrib.frame Switch 0/00 Mbs Power supply Patch module Patch cable RJ45 connector 2 2 4 4.5 2 2 2 Note (*): If the Modem has an RJ input connector use the L4664 adapter cable 456 MY HOME Structured cabling system for the home sector
Integration of the data and telephone system network with the MY HOME system, for local or remote function control RJ45 sockets 0 Multimedia Touch Screen for local control To the telephone system RJ45 sockets system Star centre ETHERNET F454 F555 F55 F552 SCS AI SCS AV Power L+L2 L L L2 L L2 POTS+ADSL external telephone line 230 Vac TO THE MY HOME SYSTEM PLT a b IN PLT F558 ADSL modem OUT a b LINE ITEM DESCRIPTION DIN MOD. QUANTITY F454 HC/HS4659 F558 PLT F555 Web server Multimedia Touch Screen ADSL filter Protect. against lightning Tel. distribution frame 0 2 2 4 ITEM DESCRIPTION DIN MOD. QUANTITY F55 F552 L4665L40 See catalogue Switch 0/00 Mbs Patch module Power supply Patch cable RJ45 connector 4 9 0 8 Structured cabling system for the home sector MY HOME 457
Wiring diagrams Expansion of the number of data sockets The number of RJ45 sockets for data transmission shown in the electric diagrams can be extended by using several F55 switches in cascade, as shown in the example: RJ45 sockets F55 F55 RJ45 sockets F55 ADSL modem ITEM DESCRIPTION DIN MOD. QUANTITY F55 Switch 0/00 Mbs 4 3 458 MY HOME Structured cabling system for the home sector