Solutions for Photovoltaic Systems Large buildings and power plants
Helping you achieve the lowest cost of energy for your project When it comes to large-scale installations, you need a solar solution that s modular and with maximum efficiency in converting raw DC power into sellable AC energy. At Schneider Electric, we provide turnkey solar solutions tailored to your needs that can be delivered the world over. That means lower operating costs, faster ROI and an accelerated design and build phase on your projects. Our customized solar solutions provide you with an end-to-end electrical infrastructure complete with power conversion, electrical distribution, supervision and security. And, with state-of-the-art inverters, a global service organization and codesign capabilities, your performance and productivity are all but guaranteed. Real-time monitoring, advanced automation and customized modular solutions all this adds up to improved total system efficiency and reliability and the assurance you ll meet local codes and regulations, wherever your project happens to be. Added value from our solutions Complete set of solutions Energy conversion Electric distribution Supervision and monitoring Security Engineering, design and project management Operations and maintenance services Service plans to provide O&M support for the life span of the PV plant Performance and uptime guarantees Local and international support Energy efficiency and availability Specific supervision and monitoring systems for photovoltaic solutions Extensive range of inverters Schneider Electric Xantrex TM inverters in any combination to meet project requirements
Get an end-to-end solar solution, a PV Box The PV Box includes inverters and electrical distribution equipment by Schneider Electric including: One or more PV inverters DC re-combiner boxes with optional current monitoring Prewired SCADA monitoring and communication enclosure LV ancillary package including an optional UPS Other items can be added to the package including internal climate controls or specific ventilation filters for dusty, rainy or snowy environments 1 MW steel 1 MW skid mount 1 MW concrete > Features: Field wiring limited to: DC cables to combiner box MV AC cables to transformer primary junction box Communication cable for SCADA Station power (if provided) Minimal site civil preparation work required Level ground with compressed gravel or crushed stone often sufficient Dependent upon soil analysis, frost levels and seismic requirements Concrete pad recommended; designs for mounting on concrete pilings also available Units provided with anchoring provisions Transformer oil spill containment option available upon request > Optional features: Integrated SCADA / electrical monitoring Data logging and control of equipment Security systems - Including lighting and access control Custom design available Special dimensions, environmental needs, seismic ratings Utility interactive features Grid tie options including protective relaying, control, smart grid features Balance of electrical system - Specialty recombines, string recombiners, DC disconnects Service capabilities - Site commissioning, extended warranties, operation and maintenance contracts Other custom sizes and configurations available upon request
Diseño nd reduce overhead energy costs Inverters > Features: Efficient, innovative power electronic platform adapted to solar applications Variety of inverter sizes and certifications to meet project requirements Up to 1000 VDC for longer strings Grid Interactive features including Low Voltage Ride Through (LVRT) and Static or Dynamic Reactive Power Control (VAR Control) to meet the most stringent utility requirements Designed to operate with external medium voltage step-up transformer Designs for floating and positive/negative grounded arrays Intelligent thermal management system separating heat sensitive from heat generating components Integrated AC and DC disconnects for isolation Optional extended warranty programs, service plans, and technical availability guarantees up to 20 years GT500 480 Atlas XC GT500E Transformer > Features: Square D TM Oil Filled Pad Mount Transformers 500KVA, 1MVA or 1.25MVA step-up transformers for up to 35KV AC Aluminum winding meets or exceeds DOE 2010 efficiency rules Ultra high efficiency amorphous core available upon request Double HV bushings available for loop feed Integrated fused disconnect Switch state visible via viewing window for added safety Bottom entry cable landing location for outgoing MV connection via junction box mounted on exterior of the PV Box Recombiner > Features: Configure-To-Order (CTO) to ensure Solar Re-combiners meet your needs CTO approach ensures design optimization and lowers total cost Available with fuses, fuses with main disconnect or DC circuit breakers for improved safety and maintenance flexibility 600 Vdc and 1000 Vdc configurations String monitoring with Modbus and/or Ethernet communications DC installation cabling feed flexibility from bottom and sides
Diseño A turnkey remote management solution to get the most from your system Monitoring solutions (SCADA) Reduction of operating costs Automated site management and highly reliable data acquisition Increase total site production Information, alarms and reports in real time Planning improvements Detailed cost information, system stress and capacity Interoperability with other systems Security CCTV, site and equipment access control Multi-site, scalable and flexible Remote access and monitoring of all your PV Power Plant assets Data acquisition: Voltage, current, power, energy generation, temperature, irradiation, device status, etc. Data logging and time-stamping Utilizes web-enabled devices Local or remote communication via ADSL, GPRS, etc. Single or multi-site supervision and control Intuitive and easy-to-navigate screens based on site visualization Customizable reporting Raw data manipulation to create usable metrics: Performance ratio, uptime calculation Computer-aided maintenance scheduling PV Box - Inverters - Power measurement - Connection to grid Delivery substation - Protection relay - Power & energy meters - Connection to grid - Weather station - Utilities interface (measurement + connection) Remote supervision Kerwin Serial Measurement management PLC/RTUs Measurement management PLC/RTUs PV Modules Array Boxes PV Box Ethernet (fibre-optic) Local supervision ClearSCADA Utility grid
Standard auxiliary components Square D TM QO load center with main breaker and feeder breakers Provision for externally supplied control power (brown power) to reduce parasitic loss on the solar system Optional control power transformer Lighting in both inverter and transformer compartments of building Lights on switches or occupancy sensors for improved energy efficiency Convenience receptacles in inverter compartment Convenient maintenance Space and dedicated circuit for SCADA hardware All wiring contained in appropriate conduits Grounding lugs / grounding bar for added safety QO Load Center Security CCTV and access control with Schneider Electric and PELCO Compact, standard and mobile cameras Dome cameras day/night Microwave or infrared shielding Complete surveillance for risk reduction Full line of security cameras Fixed, pan/tilt/zoom, scanners, thermal imaging, network cameras, enclosures, mounts, lenses Indoor & outdoor power supplies Video recorders and software management Digital and hybrid recorders Monitors LCD, CRT, Video Cubes Digital Video Management Systems Service throughout the life cycle of your installation Schneider Electric offers global customized services End of life cycle Modernization Installation Operation Design 100% Reaches of its potential Firmware upgrades Preventative maintenance contracts Diagnostics Emergency intervention Management and supply of spares 24 hour technical assistance End of life cycle Modernization Design Installation Production
Turnkey solutions for photovoltaic installations Reduce your costs, secure your investment with these benefits: Single source procurement: Simplified logistics and delivery co-ordination for field installation Ensure seamless component compatibility: Pre-wired and tested in the factory Configured for easy operational troubleshooting and monitoring Stamped certified drawings to simplify site permitting process Minimize field electrical work and installation cost: Connect AC & DC cabling without building penetration Minimal site preparation civil work costs: Side lifter trailer delivery direct to installation point Can be configured for mounting on crushed stone, concrete slab or concrete pilings Accelerate project completion: Get more MW on-grid faster Extend critical component life in a controlled environment: Limit impacts of extreme temperatures and airborne contaminants Lower total system cost: Up to 15% reduction of installed cost of electrical distribution & monitoring Canada, 19 MW Italy, 43 MW Germany, 6 MW Spain, 3 MW
Make the most of your energy Schneider Electric, a unique partner for every phase of your project Head office 35 rue Joseph Monier CS30323 92506 Rueil-Malmaison Tel.: +33 (0)1 41 29 85 00 France www.schneider-electric.com renewableenergy@schneider-electric.com Schneider Electric As a global specialist in energy management with operations in more than 100 countries, Schneider Electric offers integrated solutions across multiple market segments, including leadership positions in energy and infrastructure, industrial processes, building automation, and data centres/networks, as well as a broad presence in residential applications. Focused on making energy safe, reliable, and efficient, the company s 110,000 plus employees achieved sales of 19.6 billion Euros in 2010, through an active commitment to help individuals and organizations Make the most of their energy. 2011 Schneider Electric. All rights reserved. Xantrex, Schneider Electric, Schneider Electric logo and Square D are trademarks or registered trademarks of the Schneider Electric group of companies. All other logos and trademarks are property of their respective owners.