for ALL your Rupture Disk needs... Holders s Burst Sensors Alarm Monitoring Systems Transportation Disks Sanitary Disks Explosion Vent Panels Extruder Barrels Special Applications Service Personnel are available... 24 hrs/day 7 days/wk 365 days/yr www.elmactechnologies.com
Reverse Acting (Compression-Loaded) Metal Rupture Disks Maximum Vacuum Seat Sizes Pressures Operating Support Configuration Stard Disk Series in./ mm psig / bar Ratio Required Flow Direction Mating Holder URA 1 14 8 1,800 Liquid 90% NO 25 350 0.55 124 URA-I RLP 1 12 2 100 Liquid 90% NO 25 300 0.14 6.90 RLP-I SRA SB Ultra-Low Pressure Rupture Disks ProVAC Solid scored metal, Sanitary Rupture Disks 1 20 20 1,000 25 500 1.38 69 1 20 10 1,800 25 500 0.69 124 90% NO 90% NO Maximum Operating Seat Sizes Pressures Ratio Configuration Stard Mating Disk Series in. / mm positive negative positive negative Flow Direction Holder Vacuum Relief Direction ProPOS Dual-acting, tension loaded, minimal fragmenting design Vacuum Relief Direction Dual-acting, tension loaded, minimal fragmenting design Overpressure Relief Direction Overpressure Relief Direction Maximum Vacuum Disk Mounting Sizes Pressures Operating Support Flow Direction Disk Series in./ mm psig / bar Ratio Required Features Stard sanitary fittings only only -0-1 of w/tfe 3 12 2 psig water to column 80 300 150 psig 20% to 30 w/316ss 80% NO -0-3 12 w/tfe 2 psig 1 of to water 80% NO 80 300 150 psig column to 30 20% w/316ss SR7A SB7A SD 1 4 1.5 50 ZOOK Elmac for on Liquid 25 100 0.10 3.45 less than FEP liner on process side Mounts using stard sanitary style O-Ring gasket URAS / RLPS 1 4 2 150 Liquid 90% NO 25 100 0.14 10.34 Stard black Buna-N gasket supplied with disk
Forward Acting (Tension-Loaded) Metal Rupture Disks Maximum Vacuum Seat Sizes Pressures Operating Support Configuration Stard Disk Series in./ mm psig/ bar Ratio Required Flow Direction Mating Holder SFAZ UHZ Solid metal scored, 1/2 24 15 60,000 13 600 1.03 4138 85% ZOOK Elmac only seat insert D 30 Angular 7A Composite metal, fragment resistant 1/2 24 3 2,000 Liquid 80% YES 13 600 0.21 138 Bolted type angle seat FD UHZ Composite metal, fragment resistant 11/16 44 3 2,000 17 1117 0.21 138 80% YES NO seat insert PB 30 Angular 7A fragmenting 1/4 24 3 50,000 Liquid 70% YES 6 600 0.21 3448 Bolted type angle seat FPB UHZ fragmenting 1/8 44 3 20,000 3 1117 0.21 1379 70% YES NO seat insert ARD Composite metal, fragment resistant 2 44 1 60 50 1117 0.07 4 50% YES NO Mounts between stard companion flanges no holder required Union Screw Type Disk Holders reusable units for use on high pressure equipment, gas cylinders, laboratory equipment, autoclaves. ZOOK for information concerning your application. Accessory Kit...used to monitor the air gap between a relief valve or the presence of backpressure in a header system
Transportation Rupture Disks Stard Maximum Vacuum Sizes Pressures Operating Support Disk Mounting Disk Series in. psig @ 72 F Ratio Required Features Flow Direction RailCar AcidCar TD TCP-NR 2 60, 100, 165 90% NO NO 2 60, 100, 165 90% NO NO 2,3, 4 30, 35, 40, 90% NO YES 45, 50 PTFE & Viton liner on process side Carbon Steel Armor TFE coated green Non-Asbestos gasket on vent side PTFE & Viton liner on process side Carbon Steel Armor TFE coated green Non-Asbestos gasket on vent side PTFE liner on process side Carbon Steel Armor TFE gasket on pressure side Non-Asbestos gasket on vent side TFE coated green 2 AAR metal seated safety vents 2 AAR rubber covered safety vents Stard B16.5 Class 150 flanges Fits stard tank car safety vents Composite metal, fragment resistant 2 30, 45, 52, 50% NO NO 60, 75, 100, 165 316SS construction w/pfa seal 316SS locating ring on vent side TCP-R Fits stard tank car safety vents Composite metal, fragment resistant 2 30, 45, 52, 50% NO NO 60, 75, 100, 165 316SS construction w/pfa seal 316SS locating ring on both sides TCP-S Fits stard tank car safety vents Solid metal scored, 2 30, 45, 52, 85% NO NO 60, 75, 100, 165 316SS construction w/pfa seal 316SS locating ring on vent side ICP Solid metal scored, 2-1/2 & 3 54.4, 63.8 (68 F & 140 F) 85% NO NO Nickel disk construction PTFE gasket & PFA liner on process side 316SS locating ring on vent side Stard B16.5 Class 150 & ISO flanges
Rupture Disks Maximum Vacuum Mounts directly between stard Sizes Pressures Operating Support B16.5 Class, DIN, or JIS flanges Disk Series in. / mm psig/ bar Ratio Required Flow Direction MONO...best choice for low intermediate burst ratings Yes on 1/2 24 0.25 1,000 pressures Liquid 90% less than 13 600 0.02 69 B16.5 INVERTED...best choice for higher burst ratings 1/2 24 0.25 1,000 ZOOK Elmac for on Liquid 13 600 0.02 69 less than B16.5 FS-INVERTED...best choice for highly corrosive broad temperature range applications 1/2 24 1.00 1,000 ZOOK Elmac for on Liquid 13 600 0.07 69 less than B16.5 DUPLEX...best choice for highly corrosive applications 1/2 24 0.25 1,000 ZOOK Elmac for on Liquid 13 600 0.02 69 less than B16.5 TFE liner TWO-WAY...dual rated to protect against two different pressures in opposite directions 1-1/2 24 0.25 1,000 40 600 0.02 69 90% N/A NO B16.5 INSULATED UNIT...for temperatures exceeding 430 F (221 C) to 700 F (371 C) 1 24 0.25 1,000 25 600 0.02 69 ZOOK Elmac for on NO less than B16.5 s (all included) Insulation nameplate Burst Sensors Suitable for use in hazardous locations Re-usable Model BA Metal & fits easily into existing pipe systems One time use Model RDI Metal & Integral Indicators Metal BI ideal for a wide range of applications ZENSOR Alarm Monitoring System LD optional leak detection device for BA RDI Burst Sensors ZM2 alarm monitor designed to remotely detect the condition of two rupture disks in service
Pipe End Covers Applications Protection of Safety Relief Valves, Rupture Disks, Manifold piping systems, Ductwork, Common header systems, Flame stacks, Storage tanks Explosion Vent Panels provide over-pressure relief to minimize structural or mechanical damage caused by exping gases Extruder Barrels The products shown in this bulletin will improve your operating efficiency, protect equipment personnel from the effects of overpressurization in static dynamic pressurized systems, are immediately available. designed for over-pressure protection of plastic extrusion processes Credits Viton TM DuPont TD, SD TM ZOOK Enterprises, LLC Customer Support Elmac Technologies Limited Greenfi eld, Flintshire, United Kingdom CH8 9DP T +44 (0) 1352 717600 F +44 (0) 1352 717642 E sales@elmactechnologies.com www.elmactechnologies.com